Removal of Cr(VI) from Wastewater Using Acrylonitrile Grafted Cellulose Extracted from Sugarcane Bagasse.

A highly efficient low-cost adsorbent was prepared using raw and chemically modified cellulose isolated from sugarcane bagasse for decontamination of Cr(VI) from wastewater. First, cellulose pulp was isolated from sugarcane bagasse by subjecting it to acid hydrolysis, alkaline hydrolysis and bleaching with sodium chlorate (NaClO3). Then, the bleached cellulose pulp was chemically modified with acrylonitrile monomer in the presence Fenton's reagent (Fe+2/H2O2) to carry out grafting of acrylonitrile onto cellulose by atom transfer radical polymerization. The developed adsorbent (acrylonitrile grafted cellulose) was analyzed by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Both raw cellulose and acrylonitrile grafted cellulose were used for chromium removal from wastewater. The effects of metal ion concentration, pH, adsorbent dose and time were studied, and their values were optimized. The optimum conditions for the adsorption of Cr(VI) onto raw and chemically modified cellulose were: metal ion concentration: 50 ppm, adsorbent dose: 1 g, pH: 6, and time: 60 min. The maximum efficiencies of 73% and 94% and adsorption capacities of 125.95 mg/g and 267.93 mg/g were achieved for raw and acrylonitrile grafted cellulose, respectively. High removal efficiency was achieved, owing to high surface area of 79.92 m2/g and functional active binding cites on grafted cellulose. Isotherm and kinetics studies show that the experimental data were fully fitted by the Freundlich isotherm model and pseudo first-order model. The adsorbent (acrylonitrile grafted cellulose) was regenerated using three different types of regenerating reagents and reused thirty times, and there was negligible decrease (19%) in removal efficiency after using it for 30 times. Hence, it is anticipated that acrylonitrile could be utilized as potential candidate material for commercial scale Cr(VI) removal from wastewater.

Luminogenic and Bactericidal Studies of an Acrylonitrile-Based AIEgen.

We have synthesized an aggregation-induced emissive molecule that exhibits promising photophysical characteristics. The aggregating aptitude is demonstrated by binary solvent mixture and it is emissive in both solution and solid state. The luminogenic characteristics are employed in creating fluorescent inks as well as for the detection of nitro antibiotics in biofluids and in solid support. Moreover, the acrylonitrile-based compound is bactericidal tested on E. coli and B. subtilis.

Bamboo fiber reinforced poly (acrylonitrile-styrene-acrylic)/chlorinated polyethylene via compabilization.

In the quest to enhance the performance of natural fiber-reinforced polymer composites, achieving optimal dispersion of fiber materials within a polymeric matrix has been identified as a key strategy. Traditional approaches, such as the surface modification of natural fibers, often necessitate the use of additional synthetic chemical processes, presenting a significant challenge. In this work, taking poly (acrylonitrile-styrene-acrylic) (ASA) and bamboo fiber (BF) as a model system, we attempt to use the elastomer-chlorinated polyethylene (CPE) as a compatibilizer to tailor the mechanical properties of ASA/CPE/BF ternary composites. It was found that increasing CPE content contributed to more remarkable reinforcing efficiency, where composite with 15 phr CPE exhibited a nearly four-fold increase in reinforcing efficiency of tensile strength (20 %) compared with that of composite system without CPE (4.1 %). Such improvement was ascribed to the compatibilizing effect exerted by CPE, which prevented the aggregation of BF within polymeric matrix. Surface properties suggested the stronger interface between CPE and BF compared to that between ASA and BF and thereby contributed to the compabilizing effect. Since no chemical process was involved, it is suggested that the introduction of elastomer to be a universal, green and sustainable approach to achieve the reinforcement.

Novel acrylonitrile derived imidazo[4,5-b]pyridines as antioxidants and potent antiproliferative agents for pancreatic adenocarcinoma.

We present the design, synthesis, computational analysis, and biological assessment of several acrylonitrile derived imidazo[4,5-b]pyridines, which were evaluated for their anticancer and antioxidant properties. Our aim was to explore how the number of hydroxy groups and the nature of nitrogen substituents influence their biological activity. The prepared derivatives exhibited robust and selective antiproliferative effects against several pancreatic adenocarcinoma cells, most markedly targeting Capan-1 cells (IC50 1.2-5.3 µM), while their selectivity was probed relative to normal PBMC cells. Notably, compound 55, featuring dihydroxy and bromo substituents, emerged as a promising lead molecule. It displayed the most prominent antiproliferative activity without any adverse impact on the viability of normal cells. Furthermore, the majority of studied derivatives also exhibited significant antioxidative activity within the FRAP assay, even surpassing the reference molecule BHT. Computational analysis rationalized the results by highlighting the dominance of the electron ionization for the antioxidant features with the trend in the computed ionization energies well matching the observed activities. Still, in trihydroxy derivatives, their ability to release hydrogen atoms and form a stable O-H⋯O•⋯H-O fragment upon the H• abstraction prevails, promoting them as excellent antioxidants in DPPH• assays as well.

Biological activity and computational analysis of novel acrylonitrile derived benzazoles as potent antiproliferative agents for pancreatic adenocarcinoma with antioxidative properties.

Continuing our research into the anticancer properties of acrylonitriles, we present a study involving the design, synthesis, computational analysis, and biological assessment of novel acrylonitriles derived from methoxy, hydroxy, and N-substituted benzazole. Our aim was to examine how varying the number of methoxy and hydroxy groups, as well as the N-substituents on the benzimidazole core, influences their biological activity. The newly synthesized acrylonitriles exhibited strong and selective antiproliferative effects against the Capan-1 pancreatic adenocarcinoma cell line, with IC50 values ranging from 1.2 to 5.3 µM. Consequently, these compounds were further evaluated in three other pancreatic adenocarcinoma cell lines, while their impact on normal PBMC cells was also investigated to determine selectivity. Among these compounds, the monohydroxy-substituted benzimidazole derivative 27 emerged with the most profound and broad-spectrum anticancer antiproliferative activity being emerged as a promising lead candidate. Moreover, a majority of the acrylonitriles in this series exhibited significant antioxidative activity, surpassing that of the reference molecule BHT, as demonstrated by the FRAP assay (ranging from 3200 to 5235 mmolFe2+/mmolC). Computational analysis highlighted the prevalence of electron ionization in conferring antioxidant properties, with computed ionization energies correlating well with observed activities.

Elicitation of E-waste (acrylonitrile-butadiene styrene) enriched soil bioremediation and detoxification using Priestia aryabhattai MGP1.

Given the rise in both usage and disposal of dangerous electronics, there is a catastrophic rise in assemblage of electronic waste (e-waste). E-waste including various plastic resins are among the most frequently discarded materials in electronic gadgets. In current digital era, managing e-waste has become universal concern. From the viewpoint of persisting lacuna of e-waste managing methods, the current study is designed to fabricate an eco-friendly e-waste treatment with native soil bacteria employing an enrichment culture method. In the presence of e-waste, indigenous soil microbes were stimulated to degrade e-waste. Microbial cultures were isolated using enrichment medium containing acrylonitrile-butadiene styrene (ABS) as the primary carbon source. Priestia aryabhattai MGP1 was found to be the most dominant e-polymer degrading bacterial isolate, as it was reported to degrade ABS plastic in disposed-off television casings. Furthermore, to increase degradation potential of MGP1, Response Surface Methodology (RSM) was adopted which resulted in optimized conditions (pH 7, shaking-speed 120 rpm, and temperature 30 °C), for maximum degradation (18.88%) after 2 months. The structural changes induced by microbial treatment were demonstrated by comparing the findings of Field emission scanning electron microscopy (FESEM) images and Fourier Transform Infrared (FTIR) spectra confirming the disappearance of ≡ C─H peaks along with C-H, C=C and C ≡N bond destabilization following degradation. Energy-dispersive X-ray (EDX) analyzers of the native and decomposed e-polymer samples revealed a considerable loss in elemental weight % of oxygen by 8.4% and silica by 0.5%. Magnesium, aluminium and chlorine which were previously present in the untreated sample, were also removed after treatment by the bacterial action. When seeds of Vigna radiata were screened using treated soil in the presence of both e-waste and the chosen potent bacterial strain, it was also discovered that there was reduced toxicity in terms of improved germination and growth metrics as a phytotoxicity criterion.

Application of validated migration models for the risk assessment of styrene and acrylonitrile in ABS plastic toys.

With styrene and acrylonitrile in ABS plastic toys as examples, this paper introduces to the development of a systematic strategy for studying the chemical migration risk in toys. The approach, included the detection method, establishment of migration model, model verification, and the practical application of the model in risk assessment. First, simple and sensitive methods for detecting analyte residues and migration were developed by headspace GC-MS. Then, the migration models were established based on the migration data from 5 min to 168 h and verified using 11 ABS samples. The results showed that the predicted values of the models and the experimental values had a good fit (RMSE=0.10-8.72 %). Subsequently, the migration of analytes in 94 ABS toys was predicted with these models at specific migration times. The daily average exposure level to styrene and acrylonitrile were estimated for children (3 months to 3 years). At last, the migration models reasonably predicted that the cancer risk of styrene and acrylonitrile in ABS toys were 1.6 × 10-8-1.4 × 10-6 and 3.1 × 10-8-1.6 × 10-6, respectively. This research contributes to promote toy safety and child health by enriching migration models and risk assessments.

Synthesis and evaluation of Mn-Sn modified Ru-Ir electrode for electrocatalytic treatment of high chloride acrylonitrile wastewater.

Acrylonitrile wastewater was an organic wastewater with strong toxicity and poor biodegradability. Therefore, electro-catalytic technology became a promising acrylonitrile wastewater treatment technology because of no secondary pollution, wide application range and low water quality requirements. The optimal Mn-Sn modified Ru-Ir electrode material was synthesized by thermal method and applied in electro-catalytic treatment of acrylonitrile wastewater. The electrode materials were characterized by SEM, TEM, XRD, XPS and electrochemical characterization. SEM, TEM, XRD and XPS indicated that Mn and Sn were capable of incorporating and replacing the part of Ru or Ir and could alter the microstructure of Ru-Ir and the types of Mn and Sn oxides, raising the oxygen evolution potential (OEP) and voltampere charge. When the molar ratio of Mn-Sn was 1:1, OEP, voltampere charge and exchange current density could reach 1.303 V, 1.51 C/cm2 and 6.29×10-4 A/cm2, respectively. The co-doping of Mn-Sn had significant influence on the electrocatalytic performance of Ru-Ir electrode materials. The optimum synthesis conditions of Mn-Sn modified Ru-Ir electrode were as follows: the molar ratio of Mn-Sn was 1:1, calcination time was 4.0 hours, calcination temperature was 450℃, and solvent was water. Under certain conditions, the removal rate of acrylonitrile with Mn-Sn modified Ru-Ir electrode was 100%. Mn-Sn modified Ru-Ir electrode had high oxygen evolution potential and good removal effect of acrylonitrile, which was higher than that of ruthenium iridium electrode and RuO2 electrode.

Stepwise flotation separation of WEEE plastics by polymeric aluminum chloride towards source control of microplastics.

The mismanagement of waste electrical and electronic equipment (WEEE) resulted in numerous discarded plastics in the natural environment, and these waste plastics might experience aging, breaking, and migration, which becomes a crucial microplastic source. Sustainable management of WEEE plastics presents a considerable opportunity for resource recovery and microplastic pollution prevention. Flotation separation is a significant process of mechanical recycling, while most flotation methods can only deal with binary plastic mixtures. In this work, an advanced, stepwise, and sustainable flotation method was advocated to separate multi-plastics by polymeric aluminum chloride (PAC) modification. The abundant hydrophilic groups and environmental friendliness of PAC prompted us to further investigate the wetting effect. PAC had varied hydrophilization effects on acrylonitrile butadiene styrene (ABS) and polystyrene (PS) surfaces, but polyethylene terephthalate (PET) retained hydrophobicity. Treatment conditions, including PAC dosage, temperature, time, and pH were optimized. 100% of PET could be purified after primary separation, and the purities of ABS and PS could reach 100% and 97.4% after secondary separation, respectively. The strength of the interaction was determined by the different surface potentials and functional groups. In PAC solution, long-chain molecules or ions might interact with plastic surfaces electrostatically, and Al3+ could bridge long-chain molecules and plastic surfaces, thereby strengthening the polymer hydrophilicity. We further improved the PAC treatment process, and the reuse of PAC reduced modifier usage to 84.4 g/ton waste plastics, which was cost-effective in industrial applications. A preliminary evaluation of the energy consumption and environmental impact indicated that PAC treatment was superior to other modification methods. This work is an initial attempt at the stepwise separation of waste plastic and shows promising prospects for recycling plastic waste.

Amino Alcohols as Potential Antibiotic and Antifungal Leads.

Five focused compound libraries (forty-nine compounds), based on prior studies in our laboratory were synthesized and screened for antibiotic and anti-fungal activity against S. aureus, E. coli, K. pneumoniae, P. aeruginosa, A. baumannii, C. albicans and C. neoformans. Low levels of activity, at the initial screening concentration of 32 µg/mL, were noted with analogues of (Z)-2-(3,4-dichlorophenyl)-3-phenylacrylonitriles which made up the first two focused libraries produced. The most promising analogues possessing additional substituents on the terminal aromatic ring of the synthesised acrylonitriles. Modifications of the terminal aromatic moiety were explored through epoxide installation flowed by flow chemistry mediated ring opening aminolysis with discreet sets of amines to the corresponding amino alcohols. Three new focused libraries were developed from substituted anilines, cyclic amines, and phenyl linked heterocyclic amines. The aniline-based compounds were inactive against the bacterial and fungal lines screened. The introduction of a cyclic, such as piperidine, piperazine, or morpholine, showed >50% inhibition when evaluated at 32 µg/mL compound concentration against methicillin-resistant Staphylococcus aureus. Examination of the terminal aromatic substituent via oxirane aminolysis allowed for the synthesis of three new focused libraries of afforded amino alcohols. Aromatic substituted piperidine or piperazine switched library activity from antibacterial to anti-fungal activity with ((Z)-2-(3,4-dichlorophenyl)-3-(4-(2-hydroxy-3-(4-methylpiperazin-1-yl)propoxy)phenyl)acrylonitrile), ((Z)-2-(3,4-dichlorophenyl)-3-(4-(2-hydroxy-3-(4-(4-hydroxyphenyl)piperazin-1-yl)propoxy)-phenyl)acrylonitrile) and ((Z)-3-(4-(3-(4-cyclohexylpiperazin-1-yl)-2-hydroxypropoxy)-phenyl)-2-(3,4-dichlorophenyl)-acrylonitrile) showing >95% inhibition of Cryptococcus neoformans var. grubii H99 growth at 32 µg/mL. While (Z)-3-(4-(3-(cyclohexylamino)-2-hydroxypropoxy)phenyl)-2-(3,4-dichlorophenyl)-acrylonitrile, (S,Z)-2-(3,4-dichlorophenyl)-3-(4-(2-hydroxy-3-(piperidin-1-yl)propoxy)phenyl)acrylonitrile, (R,Z)-2-(3,4-dichlorophenyl)-3-(4-(2-hydroxy-3-(piperidin-1-yl)propoxy)phenyl)acrylonitrile, (Z)-2-(3,4-dichlorophenyl)-3-(4-(2-hydroxy-3-(D-11-piperidin-1-yl)propoxy)phenyl)-acrylonitrile, and (Z)-3-(4-(3-(4-cyclohexylpiperazin-1-yl)-2-hydroxypropoxy)-phenyl)-2-(3,4-dichlorophenyl)-acrylonitrile 32 µg/mL against Staphylococcus aureus.

Styrene-acrylonitrile-copolymer and acrylonitrile-butadiene-styrene-copolymer: a study on extractable and migratable oligomers.

Styrene-acrylonitrile-copolymer (SAN) and acrylonitrile-butadiene-styrene-copolymer (ABS) are gaining in importance as food contact materials. Oligomers and other non-intentionally added substances can migrate into foodstuffs. Five SAN and four ABS samples from the German market and manufacturers were extracted and the extractable oligomers were characterised by high performance liquid chromatography-mass spectrometry/ultraviolet detection/chemiluminescence nitrogen detection/fluorescence detection and gas chromatography-mass spectrometry. Trimers, formed from acrylonitrile and styrene units, were determined to be the dominating group of extractable oligomers in SAN and ABS in concentrations of about 4900-15800 mg/kg material. Furthermore, styrene-acrylonitrile dimers, styrene oligomers, styrene monomer and ethylbenzene were identified in the sample extracts. Migration testing with three consecutive migrations for multiple use articles was performed for two SAN articles. Migration of trimers into water, 3% acetic acid, 10% and 20% ethanol under hot-fill conditions (70°C, 2 h) was not detectable above 9 µg/dm2, while 50% ethanol acting as a food simulant for milk (124 µg/dm2 trimers during the third migration) was shown to overestimate the actual migration into milk (< 11 µg/dm2 trimers at 70°C, 2 h). 2-Amino-3-methyl-1-naphthalenecarbonitrile (AMNC), an oligomer degradation product and a primary aromatic amine, was detected in all material sample extracts (0.3-17.1 mg/kg material) and was released into food simulants in low amounts (< 0.014 µg/dm2 during the third migration into 50% ethanol at 70°C, 2 h).

A comprehensive assessment of a new series of 5',6'-difluorobenzotriazole-acrylonitrile derivatives as microtubule targeting agents (MTAs).

Microtubules (MTs) are the principal target for drugs acting against mitosis. These compounds, called microtubule targeting agents (MTAs), cause a mitotic arrest during G2/M phase, subsequently inducing cell apoptosis. MTAs could be classified in two groups: microtubule stabilising agents (MSAs) and microtubule destabilising agents (MDAs). In this paper we present a new series of (E) (Z)-2-(5,6-difluoro-(1H)2H-benzo[d] [1,2,3]triazol-1(2)-yl)-3-(R)acrylonitrile (9a-j, 10e, 11a,b) and (E)-2-(1H-benzo[d] [1,2,3]triazol-1-yl)-3-(R)acrylonitrile derivatives (13d,j), which were recognised to act as MTAs agents. They were rationally designed, synthesised, characterised and subjected to different biological assessments. Computational docking was carried out in order to investigate the potential binding to the colchicine-binding site on tubulin. From this first prediction, the di-fluoro substitution seemed to be beneficial for the binding affinity with tubulin. The new fluorine derivatives, here presented, showed an improved antiproliferative activity when compared to the previously reported compounds. The biological evaluation included a preliminary antiproliferative screening on NCI60 cancer cells panel (1-10 µM). Compound 9a was selected as lead compound of the new series of derivatives. The in vitro XTT assay, flow cytometry analysis and immunostaining performed on HeLa cells treated with 9a showed a considerable antiproliferative effect, (IC50 = 3.2 µM), an increased number of cells in G2/M-phase, followed by an enhancement in cell division defects. Moreover, ß-tubulin staining confirmed 9a as a MDA triggering tubulin disassembly, whereas colchicine-9a competition assay suggested that compound 9a compete with colchicine for the binding site on tubulin. Then, the co-administration of compound 9a and an extrusion pump inhibitor (EPI) was investigated: the association resulted beneficial for the antiproliferative activity and compound 9a showed to be client of extrusion pumps. Finally, structural superimposition of different colchicine binding site inhibitors (CBIs) in clinical trial and our MDA, provided an additional confirmation of the targeting to the predicted binding site. Physicochemical, pharmacokinetic and druglikeness predictions were also conducted and all the newly synthesised derivatives showed to be drug-like molecules.

The dissipation behavior, household processing factor and risk assessment for cyenopyrafen residues in strawberry and mandarin fruits.

A modified QuEChERS method for determining cyenopyrafen in strawberries, mandarins and their processed products was established with a good linearity (R2 > 0.9981), accuracy (recoveries of 83% to 111%) and precision (relative standard deviations of 0.9% to 14%). The limit of quantification (LOQ) was 0.01 mg/kg. Field results showed that the half-lives of cyenopyrafen were 6.8 and 11.8 d in strawberry and mandarin respectively, and that the final residues were within established maximum residue limits (MRLs). The household processing factors (PFs) for cyenopyrafen residues in strawberry and mandarin fruits were also studied: residues increased in strawberry jam (PF 1.51) and mandarin juice (1.31) but decreased in strawberries (0.58) and mandarin pulp (<0.17) after washing and peeling, respectively. A risk assessment showed that the risk from long-term dietary exposures to cyenopyrafen was 73.73%, indicating that consuming these products was unlikely to present a public health concern.

New 3-Aryl-2-(2-thienyl)acrylonitriles with High Activity Against Hepatoma Cells.

New 2-(thien-2-yl)-acrylonitriles with putative kinase inhibitory activity were prepared and tested for their antineoplastic efficacy in hepatoma models. Four out of the 14 derivatives were shown to inhibit hepatoma cell proliferation at (sub-)micromolar concentrations with IC50 values below that of the clinically relevant multikinase inhibitor sorafenib, which served as a reference. Colony formation assays as well as primary in vivo examinations of hepatoma tumors grown on the chorioallantoic membrane of fertilized chicken eggs (CAM assay) confirmed the excellent antineoplastic efficacy of the new derivatives. Their mode of action included an induction of apoptotic capsase-3 activity, while no contribution of unspecific cytotoxic effects was observed in LDH-release measurements. Kinase profiling of cancer relevant protein kinases identified the two 3-aryl-2-(thien-2-yl)acrylonitrile derivatives 1b and 1c as (multi-)kinase inhibitors with a preferential activity against the VEGFR-2 tyrosine kinase. Additional bioinformatic analysis of the VEGFR-2 binding modes by docking and molecular dynamics calculations supported the experimental findings and indicated that the hydroxy group of 1c might be crucial for its distinct inhibitory potency against VEGFR-2. Forthcoming studies will further unveil the underlying mode of action of the promising new derivatives as well as their suitability as an urgently needed novel approach in HCC treatment.

The role of chlorine atom on the binding between acrylonitrile derivatives and fat mass and obesity-associated protein.

In this work, seven acrylonitrile derivatives were selected as potential inhibitors of fat and obesity-related proteins (FTO) by the aid of fluorescence spectroscopy, ultraviolet visible spectroscopy, molecular docking, and cytotoxicity methods. Results show that the interaction between 3-amino-2-(4-chlorophenyl)-3-phenylacrylonitrile (1a) and FTO was the strongest among these derivatives. Thermodynamic analysis and molecular modeling show that the main force between 1a and FTO is hydrophobic interaction. The cytotoxicity test showed that the IC50 value of 1a was 46.64 µmol/L, which indicated 1a had the smallest IC50 value and had the best inhibitory effect on the proliferation of leukemia K562 cells among the seven derivatives. Both our previous results and this work show that chlorine atoms play important role in the binding of small molecules and FTO. This work brings new information for the study of FTO inhibitors.

N-substituted benzimidazole acrylonitriles as in vitro tubulin polymerization inhibitors: Synthesis, biological activity and computational analysis.

We present the design, synthesis and biological activity of novel N-substituted benzimidazole based acrylonitriles as potential tubulin polymerization inhibitors. Their synthesis was achieved using classical linear organic and microwave assisted techniques, starting from aromatic aldehydes and N-substituted-2-cyanomethylbenzimidazoles. All newly prepared compounds were tested for their antiproliferative activity in vitro on eight human cancer cell lines and one reference non-cancerous assay. N,N-dimethylamino substituted acrylonitriles 30 and 41, bearing N-isobutyl and cyano substituents placed on the benzimidazole nuclei, showed strong and selective antiproliferative activity in the submicromolar range of inhibitory concentrations (IC50 0.2-0.6 µM), while being significantly less toxic than reference systems docetaxel and staurosporine, thus promoting them as lead compounds. Mechanism of action studies demonstrated that two most active compounds inhibited tubulin polymerization. Computational analysis confirmed the suitability of the employed benzimidazole-acrylonitrile skeleton for the binding within the colchicine binding site in tubulin, thus rationalizing the observed antitumor activities, and demonstrated that E-isomers are active substances. It also provided structural determinants affecting both the binding position and the matching affinities, identifying the attached NMe2 group as the most dominant in promoting the binding, which allows ligands to optimize favourable cation∙∙∙π and hydrogen bonding interactions with Lys352.

Indole acrylonitriles as potential anti-hyperglycemic agents: Synthesis, α-glucosidase inhibitory activity and molecular docking studies.

One of the most prevailing metabolic disorder diabetes mellitus has become the global health issue that has to be addressed and cured. Different marketed drugs have been made available for the treatment of diabetes but there is still a need of introducing new therapeutic agents that are economical and have lesser or no side effects. The current study deals with the synthesis of indole acrylonitriles (3-23) and the evaluation of these compounds for their potential for α-glucosidase inhibition. The structures of these synthetic molecules were deduced by using different spectroscopic techniques. Acarbose (IC50 = 2.91 ± 0.02 µM) was used as standard in this study and the synthetic molecules (3-23) have shown promising α-glucosidase inhibitory activity. Compounds 4, 8, 10, 11, 14, 18, and 21 displayed superior inhibition of α-glucosidase enzyme in the range of (IC50 = 0.53 ± 0.01-1.36 ± 0.04 µM) as compared to the standard acarbose. Compound 10 (IC50 = 0.53 ± 0.01 µM) was the most effective inhibitor of this library and displayed many folds enhanced activity in contrast to the standard. Molecular docking of synthetic compounds was performed to verify the binding interactions of ligand with the active site of enzyme. This study had identified a number of potential α-glucosidase inhibitors that can be used for further research to identify a potent therapeutic agent against diabetes.

3D Printing - Evaluating Particle Emissions of a 3D Printing Pen.

Three-dimensional (3D) printing as a type of additive manufacturing shows continuing increase in application and consumer popularity. The fused filament fabrication (FFF) is an inexpensive method used most frequently by consumers. Studies with 3D printers have shown that during the printing process particulate and volatile substances are released. Handheld 3D printing pens also use the FFF method but the consumer's proximity to the 3D pens gives reason to higher exposure compared to a 3D printer. At the same time, 3D printing pens are often marketed for children who could be more sensitive to the printing emission. The aim of this study was to implement a low cost method to analyze the emissions of 3D printing pens. Polylactide (PLA) and acrylonitrile butadiene styrene (ABS) filaments of different colors were tested. In addition, filaments containing metal and carbon nanotubes (CNTs) were analyzed. An 18.5 L chamber and sampling close to the emission source was used to characterize emissions and concentrations near the breathing zone of the user. Particle emissions and particle size distributions were measured and the potential release of metal particles and CNTs investigated. Particle number concentrations were found in a range of 105 - 106 particles/cm3, which is comparable to previous reports from 3D printers. Transmission electron microscopy (TEM) analysis showed nanoparticles of the different thermoplastic materials as well as of metal particles and CNTs. High contents of metal were observed by inductively coupled plasma mass spectrometry (ICP-MS). These results call for a cautious use of 3D pens due to potential risk to the consumers.

Effect of lignin-based monomer on controlling the molecular weight and physical properties of the polyacrylonitrile/lignin copolymer.

In this work, lignin was grafted with acrylonitrile to control the molecular weights and molecular architecture of polyacrylonitrile (PAN)/lignin copolymer. Lignin-acrylonitrile monomer (LA-AN) and its copolymers with AN were synthesized successfully. First, lignin was aminated (LA) and then grafted with 2-chloroacrylonitrile to prepare LA-AN. The copolymerization of LA-AN and AN was carried out using 2,2-azobis(2-methylpropionitrile) as initiator. The modification, grafting, and copolymerization were confirmed with Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and X-ray photoelectron spectroscopy. Contrary to the previous studies, gel permeation chromatography showed that the molecular weight of the copolymers was increased significantly due to the presence of lignin (up to 203,944). Viscosity analysis revealed that the addition of lignin reduces the viscosity of the copolymer solution. While thermogravimetric analysis showed improvement in the degradation temperature, and lowering of the melt temperature, as revealed by differential scanning calorimetry. These findings indicated that the attaching acrylonitrile on lignin molecules result in control of the molecular weight and molecular structure of PAN/Lignin copolymers which results in enhanced solubility, spinnability, and other properties associated with molecular weight.

Nanocellulose-triggered structural and property changes of acrylonitrile-butadiene rubber films.

In this study, the effect of cellulose nanocrystals (CNCs) incorporation on the structure-properties of acrylonitrile-butadiene rubber (NBR films), with particular focus on curing enhancement and reinforcing potential, was investigated. The NBR crosslinking efficiency, observed from nuclear magnetic resonance analysis, increased with successive CNC concentration increases due to better dispersion of ZnO from Zn-cellulose complex formation. Energy dispersive X-ray and transmission electron microscope analysis of the films revealed increasingly well-dispersed ZnO with increasing CNC. The increase in the crosslinking density in conjuncture with the reinforcing capability of CNCs resulted in increases in the tensile strength, stiffness, toughness, tear strength and elongation by 203, 8300, 664, 179, and 14%, respectively for films containing 3 phr CNC compared to the neat NBR. The incorporation of 0.5 phr CNC reduced the water absorption of neat CNC by 250%. Overall, water absorption of the nanocomposite films was considerably lower than that of the neat NBR through CNC consolidation of the rubber particles by reducing free volume in the NBR structure. The nanocomposite films show promise for glove and other dipped product applications where improved tear resistance and overall physical properties improvement are needed without compromising the integrity.