Why did the use of antimony-bearing alloys in Bronze Age Anatolia fall dormant after the Early Bronze Age?: A Case from Resuloglu (Çorum, Turkey).

The archaeometallurgical and archaeological research carried out in Anatolia has provided numerous examples of diverse alloying practices representing different levels of societal interaction, from the extraction of ores to the trade of finished goods and high level gift exchange among elites. While discussions abound about the exploitation of mines, mining settlements, possible origins of artifacts, resources of copper, arsenic, and especially tin to improve our knowledge about Anatolian Bronze Age mining and metallurgy, uncommon alloying practices including the use of antimony, nickel, or lead have long remained in the shadows of scholarly research. With the aim of bringing attention to the diversity in alloying practices in Anatolian metallurgy, this article focuses on the use of antimony through an appraisal of archaeological and textual evidence from Bronze Age Anatolia. Archaeometric data from several Early Bronze Age sites are re-examined alongside new data emerging from Resuloglu (Çorum, Turkey) to explain the reduction of the variety of alloy types used. Portable-XRF analysis of artifacts from Resuloglu and mineralogical analysis of an antimony-bearing ore fragment present evidence of use of antimony at the region during the Early Bronze Age. This period is followed by disappearance of antimony in material record until the Iron Age, while textual records weakly refer to its circulation within the region. This paper considers geological, technological, and socio-economic factors to explain why the use of antimony alloys falls dormant after the Early Bronze Age. The political and economic change towards centralization over geological and technological factors is proposed as an explanation.

Copper to Tuscany - Coals to Newcastle? The dynamics of metalwork exchange in early Italy.

The paper discusses results of an interdisciplinary research project integrating lead isotope, chemical, and archaeological analysis of 20 early metal objects from central Italy. The aim of the research was to develop robust provenance hypotheses for 4th and 3rd millennia BC metals from an important, yet hitherto neglected, metallurgical district in prehistoric Europe, displaying precocious copper mining and smelting, as well as socially significant uses of metals in 'Rinaldone-style' burials. All major (and most minor) ore bodies from Tuscany and neighbouring regions were characterised chemically and isotopically, and 20 Copper Age axe-heads, daggers and halberds were sampled and analysed. The objects were also reassessed archaeologically, paying special attention to find context, typology, and chronology. This multi-pronged approach has allowed us to challenge received wisdom concerning the local character of early metal production and exchange in the region. The research has shown that most objects were likely manufactured in west-central Italy using copper from Southern Tuscany and, quite possibly, the Apuanian Alps. A few objects, however, display isotopic and chemical signatures compatible with the Western Alpine and, in one case, French ore deposits. This shows that the Copper Age communities of west-central Italy participated in superregional exchange networks tying together the middle/upper Tyrrhenian region, the western Alps, and perhaps the French Midi. These networks were largely independent from other metal displacement circuits in operation at the time, which embraced the north-Alpine region and the south-eastern Alps, respectively.

[Professor Iosif Khaimovich Rabkin and his priorities in roentgenoendovascular surgery].

The article is dedicated to outstanding Soviet and Russian interventional radiologist, Professor I. Kh. Rabkin and his priorities in the development of roentgenoendovascular methods of diagnosis and treatment of arterial and venous diseases. Virtually simultaneously with American surgeons, I. Kh. Rabkin not only worked out anew method of intravascular stenting of arteries with spirals made of shape-memory metal ( nitinol) but was the first in the world who in 1984 successfully stented the external iliac artery in a 56-year-old male patient with stage IV limb ischaemia.

[Nicolò Paganini: Devil's violinist because of abnormal hands?--New investigations using a bronze cast from the right hand]. / Nicolò Paganini: Teufelsgeiger durch abnorme Hände?--Neue Untersuchungen eines Bronzegipsabgusses der rechten Hand.

This paper presents new measurements of a bronze cast from the right hand of the famous Italian violin virtuoso Nicolò Paganini (1782-1840). These are compared to anthropometric standard values. In addition, detailed dorsal and palmar views of the cast are shown. With a middle finger length of 75 mm, the palm width is 60 mm and the hand length 152 mm, which is significantly below the 5% percentile of today's standard values. Also the finger length index (0.55), the ratio of finger length to palm length (0.98) and the ratio of finger length to palm width (1.25) are significantly above normal limits. Hence, Paganini had abnormal hand measurements with a very small palm and relatively "long" fingers. This remarkable constellation, among others, could have been advantageous for his amazing skills as a violinist.

Pre-Columbian alloys from the royal tombs of Sipán; energy dispersive X-ray fluorescence analysis with a portable equipment.

On the north coast of present-day Peru flourished approximately between 50 and 700 AD, the Moche civilization. It was an advanced culture and the Moche were sophisticated metalsmiths, so that they are considered as the finest producers of jewels and artefacts of the region. The Moche metalworking ability was impressively demonstrated by the objects discovered by Walter Alva and coworkers in 1987, in the excavations of the "Tumbas Reales de Sipán". About 50 metal objects from these excavations, now at the namesake Museum, in Lambayeque, north of Peru, were analyzed with a portable equipment using energy-dispersive X-ray fluorescence. This portable equipment is mainly composed of a small size X-ray tube and a thermoelectrically cooled X-ray detector. Standard samples of gold and silver alloys were employed for quantitative analysis. It was determined that the analyzed artefacts from the "Tumbas Reales de Sipán" are mainly composed of gold, silver and copper alloys, of gilded copper and of tumbaga, the last being a poor gold alloy enriched at the surface by depletion gilding, i.e. removing copper from the surface.

A note on liquid iron in medieval Europe.

Iron-arsenic alloys are described in many medieval chemical recipes as a means to "liquefy" iron. In fact, while such alloys have relatively low melting points, they are not the only examples of iron being known as a liquid metal. There is evidence from the analysis of swords, as well as from written references, that crucible steel, probably imported from the Middle East, was known in Western Europe from the Early Middle Ages. In addition, the "blast furnace", which produced liquid pig iron, is now known from archaeological evidence to have been operated from at least the thirteenth century in Scandinavia. The descriptions of iron-smelting and iron-working given in the accounts written by scholastic alchemists are in fact closely related to the contemporary practices of craftsmen operating iron furnaces.

An ancient Roman bowl embedded in a soil sample: surface shaded three dimensional display using data from a multi-detector CT.

We present an unusual application of multidetector CT and shaded surface rendering in the investigation of a soil sample, containing an ancient Roman bronze bowl. The CT findings were of fundamental importance in helping the archaeologists study the bronze bowl from the soil sample.

Posibles efectos en la salud asociados con la metalurgia precolombina / Possible health effects associated with Pre-Columbian metallurgy

En el Viejo Mundo algunos investigadores piensan que los efectos adversos en la salud relacionados con la exposición a arsénico influyeron para que se cambiara de usar aleaciones de cobre con arsénico a otras menos tóxicas. En este artículo se evalúa esta hipótesis para las tres grandes tradiciones metalúrgicas precolombinas: Andes centrales, área intermedia y occidente mexicano. Los artefactos metálicos revelan que las concentraciones de arsénico en los Andes centrales fueron similares a las del Viejo Mundo (0,5 por ciento a 1 por ciento), en el área intermedia los valores eran muy inferiores, mientras en el occidente mexicano fueron muy superiores (7 por ciento a 25 por ciento). En los Andes centrales se observó inicialmente el uso de bronce arsenical, pero rápidamente se conocieron las aleaciones de cobre-estaño; estas últimas fueron cada vez más preferidas y difundidas por todo el imperio inca. Las evidencias, osteológicas y en objetos artísticos, de amputaciones de los pies entre individuos moches de los Andes centrales apoyan la idea de la presencia de la enfermedad del pie negroentre las poblaciones precolombinas. En conclusión, es posible que los efectos nocivos del arsénico se hayan observado en el Nuevo Mundo, y favorecido el cambio hacia aleaciones menos tóxicas. Se requieren nuevos estudios específicos para verificar esta hipótesis