Recommendation of minimal distal tibial length for long axis coordinate system definitions.

Accurate anatomical coordinate systems for the foot and ankle are critical for interpreting their complex biomechanics. The tibial superior-inferior axis is crucial for analyzing joint kinematics, influencing bone motion analysis during gait using CT imaging and biplane fluoroscopy. However, the lack of consensus on how to define the tibial axis has led to variability in research, hindering generalizability. Even as advanced imaging techniques evolve, including biplane fluoroscopy and weightbearing CT, there exist limitations to imaging the entire foot together with the full length of the tibia. These limitations highlight the need to refine axis definitions. This study investigated various superior-inferior axes using multiple distal tibia lengths to determine the minimal field of view for representing the full tibia long-axis. Twenty human cadaver tibias were imaged and segmented to generate 3D bone models. Axes were calculated based on coordinate definitions that required user manual input, and a gold standard mean superior-inferior axis was calculated based on the population's principal component analysis axis. Four manually calculated superior-inferior tibial axes groups were established based on landmarks and geometric fittings. Statistical analysis revealed that geometrically fitting a cylinder 1.5 times the mediolateral tibial width, starting 5 cm above the tibial plafond, yielded the smallest angular deviation from the gold standard. From these findings, we recommend a minimum field of view that includes 1.5 times the mediolateral tibial width, starting 5 cm above the tibial plafond for tibial long-axis definitions. Implementing these findings will help improve foot and ankle research generalizability and impact clinical decisions.

Comparison of Neurovascular Structures at Risk During Ankle Arthroscopy: A Cadaveric Study.

BACKGROUND: Arthroscopy has become increasingly common for diagnosis and treatment of ankle joint pathology. The four most common portals used for ankle arthroscopy are the anteromedial, anterolateral, posteromedial, and posterolateral. Anatomy of neurovascular structures along the ankle can significantly vary. METHODS: The distance of neurovascular structures was compared with anatomical landmarks of ankle arthroscopic portals to verify safe zones for scope insertion. Twenty-six fresh frozen cadavers were used, with dissection of standard anatomical landmarks and neurovascular structures. Portals were made and verified with a 2.7-mm arthroscope. RESULTS: Significant differences were found in mean distances between anatomical landmarks except for the peroneus tertius tendon to the intermediate dorsal cutaneous nerve (P = .181; all others, P < .0001). In quantifying a scope space, the anteromedial and anterolateral portals had the largest margin of error at 0.82 cm and 1.04 cm, respectively. The saphenous nerve and vein were an average of 1.39 cm and 1.23 cm, respectively, from the anteromedial portal. The peroneus tertius tendon was an average of 0.23 cm from the intermediate dorsal cutaneous nerve. The tibialis anterior tendon was an average of 1.10 cm lateral to the medial gutter; the peroneus tertius tendon, 1.31 cm medial to the lateral gutter; and the Achilles tendon, 0.94 and 0.73 cm from the medial and lateral gutters, respectively. CONCLUSIONS: Among common ankle arthroscopic approaches, the anterolateral portal features the highest anatomic variability. These data support the standard protocol of beginning with the anteromedial portal to facilitate visualization of lateral-sided anatomy before anterolateral portal placement.

The calcaneofibular ligament groove at the inferior fibula, an ultrasonographic anatomical landmark.

PURPOSE: Calcaneofibular ligament (CFL) injuries are harder to diagnose than anterior talofibular ligament (ATFL) ones. This study aimed to clarify the fibular attachment of the CFL and verify the bony landmark for evaluating the CFL on ultrasonography. METHODS: Fifty-nine ankles were used in this anatomical study. To confirm the control function of the CFL, we performed passive movement manually using cadaveric ankles and observed the ankle positions where the CFLs were tense. Histological observation of CFL attachment of the fibula was performed using Masson's trichrome stain. The ATFL and CFL were removed, and the bone morphology of the CFL attachment and inferior fibular end was imaged using a stereomicroscope and a 3D scanner. Using ultrasonography, we evaluated the bone morphology of the fibular attachment of the CFL in short-axis images of 27 healthy adult ankles. RESULTS: The CFL was tensed according to ankle motions: supination, maximum dorsi flexion, maximum plantar flexion, and mild plantar flexion-external rotation. Below the CFL attachment of the fibula was a slight groove between the inferior tip and the obscure tubercle of the fibula. This groove was observed in 81.5% of cases using short-axis ultrasonography. CONCLUSION: The CFL was tensed in various ankle positions to control the movements of the talocrural and subtalar joints. There was a slight groove at the inferior end of the fibula where the CFL coursed downward. We called it the CFL groove and proposed that it could serve as a landmark for the short-axis image of ultrasonography.

A hybrid statistical morphometry free-form deformation approach to 3D personalized foot-ankle models.

Foot and ankle joint models are widely used in the biomechanics community for musculoskeletal and finite element analysis. However, personalizing a foot and ankle joint model is highly time-consuming in terms of medical image collection and data processing. This study aims to develop and evaluate a framework for constructing a comprehensive 3D foot model that integrates statistical shape modeling (SSM) with free-form deformation (FFD) of internal bones. The SSM component is derived from external foot surface scans (skin measurements) of 50 participants, utilizing principal component analysis (PCA) to capture the variance in foot shapes. The derived surface shapes from SSM then guide the FFD process to accurately reconstruct the internal bone structures. The workflow accuracy was established by comparing three model-generated foot models against corresponding skin and bone geometries manually segmented and not part of the original training set. We used the top ten principal components representing 85 % of the population variation to create the model. For prediction validation, the average Dice similarity coefficient, Hausdorff distance error, and root mean square error were 0.92 ± 0.01, 2.2 ± 0.19 mm, and 2.95 ± 0.23 mm for soft tissues, and 0.84 ± 0.03, 1.83 ± 0.1 mm, and 2.36 ± 0.12 mm for bones, respectively. This study presents an efficient approach for 3D personalized foot model reconstruction via SSM generation of the foot surface that informs bone reconstruction based on FFD. The proposed workflow is part of the open-source Musculoskeletal Atlas Project linked to OpenSim and makes it feasible to accurately generate foot models informed by population anatomy, and suitable for rigid body analysis and finite element simulation.

3D isotropic MRI of ankle: review of literature with comparison to 2D MRI.

The ankle joint has complex anatomy with different tissue structures and is commonly involved in traumatic injuries. Magnetic resonance imaging (MRI) is the primary imaging modality used to assess the soft tissue structures around the ankle joint including the ligaments, tendons, and articular cartilage. Two-dimensional (2D) fast spin echo/turbo spin echo (FSE/TSE) sequences are routinely used for ankle joint imaging. While the 2D sequences provide a good signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) with high spatial resolution, there are some limitations to their use owing to the thick slices, interslice gaps leading to partial volume effects, limited fluid contrast, and the need to acquire separate images in different orthogonal planes. The 3D MR imaging can overcome these limitations and recent advances have led to technical improvements that enable its widespread clinical use in acceptable time periods. The volume imaging renders the advantage of reconstructing into thin continuous slices with isotropic voxels enabling multiplanar reconstructions that helps in visualizing complex anatomy of the structure of interest throughout their course with improved sharpness, definition of anatomic variants, and fluid conspicuity of lesions and injuries. Recent advances have also reduced the acquisition time of the 3D datasets making it more efficient than 2D sequences. This article reviews the recent technical developments in the domain 3D MRI, compares imaging with 3D versus 2D sequences, and demonstrates the use-case scenarios with interesting cases, and benefits of 3D MRI in evaluating various ankle joint components and their lesions.

The use of deep learning enables high diagnostic accuracy in detecting syndesmotic instability on weight-bearing CT scanning.

PURPOSE: Delayed diagnosis of syndesmosis instability can lead to significant morbidity and accelerated arthritic change in the ankle joint. Weight-bearing computed tomography (WBCT) has shown promising potential for early and reliable detection of isolated syndesmotic instability using 3D volumetric measurements. While these measurements have been reported to be highly accurate, they are also experience-dependent, time-consuming, and need a particular 3D measurement software tool that leads the clinicians to still show more interest in the conventional diagnostic methods for syndesmotic instability. The purpose of this study was to increase accuracy, accelerate analysis time, and reduce interobserver bias by automating 3D volume assessment of syndesmosis anatomy using WBCT scans. METHODS: A retrospective study was conducted using previously collected WBCT scans of patients with unilateral syndesmotic instability. One-hundred and forty-four bilateral ankle WBCT scans were evaluated (48 unstable, 96 control). We developed three deep learning models for analyzing WBCT scans to recognize syndesmosis instability. These three models included two state-of-the-art models (Model 1-3D Convolutional Neural Network [CNN], and Model 2-CNN with long short-term memory [LSTM]), and a new model (Model 3-differential CNN LSTM) that we introduced in this study. RESULTS: Model 1 failed to analyze the WBCT scans (F1 score = 0). Model 2 only misclassified two cases (F1 score = 0.80). Model 3 outperformed Model 2 and achieved a nearly perfect performance, misclassifying only one case (F1 score = 0.91) in the control group as unstable while being faster than Model 2. CONCLUSIONS: In this study, a deep learning model for 3D WBCT syndesmosis assessment was developed that achieved very high accuracy and accelerated analytics. This deep learning model shows promise for use by clinicians to improve diagnostic accuracy, reduce measurement bias, and save both time and expenditure for the healthcare system. LEVEL OF EVIDENCE: II.

The increased anterior talofibular ligament-posterior talofibular ligament angle on MRI may help evaluate chronic ankle instability.

PURPOSE: This study intended to compare the difference between the anterior talofibular ligament (ATFL) and posterior talofibular ligament (PTFL) angle with chronic ankle instability (CAI) patients and healthy volunteers, and to confirm whether using the ATFL-PTFL angle could be a reliable assessment method for CAI, so as to improve the accuracy and specificity of clinical diagnosis. METHODS: This retrospective study included 240 participants: 120 CAI patients and 120 healthy volunteers between 2015 and 2021. The ATFL-PTFL angle of the ankle region was gaged in the cross-sectional supine position on MRI between two groups. After participants undergoing a comprehensive MRI scanning, ATFL-PTFL angles were regarded as the main indicator of patients with the injured ATFLs and healthy volunteers to compare, and were measured by an experienced musculoskeletal radiologist. Moreover, other qualitative and quantitative indicators referring to anatomical and morphological characteristics of the AFTL were included in this study with MRI, such as the length, width, thickness, shape, continuity, and signal intensity of the ATFL, which can be used as secondary indicators. RESULTS: In the CAI group, the ATFL-PTFL angle was 90.8° ± 5.7°, which was significantly different from the non-CAI group where the ATFL-PTFL angle for 80.0° ± 3.7° (p < 0.001). As for the ATFL-MRI characteristics, the length (p = 0.003), width (p < 0.001), and thickness (p < 0.001) in the CAI group were also significantly different from the non-CAI group. Over 90% of the cases, patients of the CAI group had injured ATFL with an irregular shape, non-continuous, and high or mixed signal intensity. CONCLUSION: Compared with healthy people, the ATFL-PTFL angle of most CAI patients is larger, which can be used as a secondary index to diagnose CAI. However, the MRI characteristic changes of ATFL may not relate to the increased ATFL-PTFL angle.

Anatomical variations of the calcaneofibular ligament in human foetuses.

Ligaments anatomy often show a huge anatomy variations between species and individuals. For example calcaneofibular ligaments (CFL) characterize the great variability of morphological shape or presence of additional bands. The aim of this study was to propose first anatomical classification of CFL concerning on human fetuses. We investigated thirty spontaneously-aborted human fetuses aged 18-38 weeks of gestation at death. Sixty lower limbs (30 left and 30 right) fixed in 10% formalin solution were examined. The morphological variability of CFL was assessed. Four types of CFL morphology were observed. Type I was characterized by a band shape. This was the most common type, occurring in 53% of all cases. Based on our study we are proposing a classification based on four morphological types of CFL. Types 2 and 4 are further divided into subtypes. Present classification may be useful to better understand the anatomical development of ankle joint.

Advantages of ultrasound identification of the distal insertion of the calcaneofibular ligament during ligament reconstructions.

INTRODUCTION: In lateral ankle instability, anatomical ligament reconstructions are generally performed using arthroscopy. The ligament graft is passed through the talar, fibular and calcaneal tunnels, reconstructing the anterior talofibular and calcaneofibular (CFL) bundles. However, the calcaneal insertion of the CFL needs to be performed in an extra-articular fashion, and cannot be carried out under arthroscopy, thus requiring specific anatomical landmarks. For obtaining these landmarks, methods based on radiography or surface anatomy have already been described but can only offer an approximate identification of the actual CFL anatomical insertion point. In contrast, an ultrasound technique allows direct visualization of the insertion point and of the sural nerve that may be injured during surgery. Our study aimed to assess the reliability and accuracy of ultrasound visualization when performing calcaneal insertion of the CFL with specific monitoring of the sural nerve. MATERIALS AND METHODS: Our anatomical study was carried out on 15 ankles available from a body donation program. Ultrasound identification of the sural nerve was obtained first with injection of dye. A needle was positioned at the level of the calcaneal insertion of the CFL. After dissection, in all the ankles, the dye was in contact with the sural nerve and the needle was located in the calcaneal insertion area of the CFL. The mean distance between the sural nerve and the needle was 4.8 mm (range 3-7 mm). DISCUSSION AND CONCLUSION: A pre- or intra-operative ultrasound technique is a simple and reliable means for obtaining anatomical landmarks when drilling the calcaneal tunnel for ligament reconstruction of the lateral plane of the ankle. This tunnel should preferably be drilled obliquely from the heel towards the subtalar joint (1 h-3 h direction on an ultrasound cross section), which preserves a maximum distance from the sural nerve for safety purposes, while allowing an accurate anatomical positioning of the osseous tunnel.

Anatomy of the Ankle and Subtalar Joint Ligaments: What We Do Not Know About It?

Understanding of the ankle and subtalar joint ligaments is essential to recognize and manage foot and ankle disorders. The stability of both joints relies on the integrity of its ligaments. The ankle joint is stabilized by the lateral and medial ligamentous complexes while the subtalar joint is stabilized by its extrinsic and intrinsic ligaments. Most injuries to these ligaments are linked with ankle sprains. Inversion or eversion mechanics affect the ligamentous complexes. A profound knowledge of the ligament's anatomy allows orthopedic surgeons to further understand anatomic or nonanatomic reconstructions.

Ankle Joint Microinstability: You Might Have Never Seen It but It Has Definitely Seen You.

Ankle microinstability results from the superior fascicle of anterior talofibular ligament (ATFL) injury and is a potential cause of chronic pain and disability after an ankle sprain. Ankle microinstability is usually asymptomatic. When symptoms appear, patients describe a subjective ankle instability feeling, recurrent symptomatic ankle sprains, anterolateral pain, or a combination of them. A subtle anterior drawer test can usually be observed, with no talar tilt. Ankle microinstability should be initially treated conservatively. If this fails, and because superior fascicle of ATFL is an intra-articular ligament, an arthroscopic procedure is recommended to address.

Variation in the anterior talofibular ligament and the impact of sex, height, weight, and age.

The anterior talofibular ligament (ATFL) is one of the lateral ankle ligaments stabilizing the ankle joint, primarily involved with restricting foot supination. There has been limited research on precise ATFL anatomy and variations, and several studies have conflicting results. The objective of this study was to determine if a correlation exists between ATFL variation and sex, height, weight, and age. In this study, 15 male ankles and 24 female ankles were dissected free of overlying structures to reveal the ATFL, which was classified based on the number of fascicles. Nine of the ligaments had one fascicle, 13 had two incompletely separated fascicles, 12 had two completely separated fascicles, and three had three fascicles. Two ankles had no ATFL. Ligament length and width were measured using the program ImageJ; average length was 19.2 mm and average width was 9.59 mm. Male ligaments were longer and wider than female ligaments. A multivariate regression model was used to assess the influence of sex, height, weight, age, ligament length, and ligament width in predicting ligament variant type; these factors were determined to have no influence. This study found a large amount of ATFL variability, but no correlation between height, weight, age, ligament length, ligament width and ATFL variation. Male ligaments were longer and wider than female ligaments.

Complejo ligamentoso lateral de la articulación talocrural (tobillo): biometría y patrones de división / Lateral ankle ligamentous complex: biometrics and division patterns

El complejo ligamentoso lateral de la articulación talocrural o «tobillo» (CLT) contempla básicamente tres estructuras denominadas como ligamento talofibular anterior (LTFA), ligamento calcaneofibular (LCF) y ligamento talofibular posterior (LTFP). En los últimos artículos publicados en relación con la morfología del CLT, se clasifica al LTFA en tres tipos, basada en el número de bandas o fascículos. Esta variabilidad morfológica plantea nuevos desafíos de estudios anatómicos en la biomecánica y estabilidad de la región talocrural. El objetivo de este estudio fue profundizar la anatomía de este complejo, en base a disecciones por capa que nos permitan visualizar las relaciones existentes entre estos ligamentos y estructuras aledañas. Se utilizaron 10 piezas congeladas pertenecientes al Departamento de Anatomía y Medicina Legal de la Facultad de Medicina de la Universidad de Chile, cuyos ligamentos fueron localizados y medidos en ancho y longitud. Para el LTFA se observó un patrón único en 5 muestras, bifurcado en 4, mientras que en un caso se visualizó un patrón trifurcado. El conocimiento del complejo ligamentoso lateral de tobillo, así como de su dirección, biometría y bandas o fascículos son un importante aporte para la imagenología, rehabilitación, clínica y cirugías que aborden esta región.

SUMMARY: The lateral ankle complex (LAC) basically includes three structures called anterior talofibular ligament (ATFL), calcaneofibular ligament (CFL) and posterior talofibular ligament (PTFL). In recent works published in relation to the morphology of LAC, ATFL is classified into three types, based on the number of bands or fascicles. This morphological modification poses new challenges for anatomical studies in biomechanics and ankle stability. The objective of this is to deepen in greater detail the anatomy of this complex, based on dissections by layer that allow us to study the existing relationships between these ligaments and surrounding structures. 10 frozen pieces belonging to the Department of Anatomy and Legal Medicine of the Faculty of Medicine of the University of Chile were used; whose ligaments were located and measured in width and length. For ATFL, a single pattern was found in 5 samples, bifurcated in 4, while a trifurcated pattern was seen in one case. Knowledge of the lateral ligamentous complex of the ankle, as well as its direction, biometry and bands or fascicles, are an important contribution to imaging, rehabilitation, clinics and surgeries that address this region.

Lateral malleolar crest and its clinical importance.

PURPOSE: During study of anatomy of a fractured posterior malleolus of the ankle on CT scans, the authors noticed a prominent crest on the lateral malleolus, which they termed the lateral malleolar crest (LMC). As, in their view, LMC is a clinically important structure which was only briefly mentioned by a few authors without an official term, they focused on the anatomy of this structure. MATERIALS AND METHODS: A total of 352 dry fibulae were analyzed and the following parameters recorded: (F) length of the fibula, (LMC) total length of LMC, (A) length of the part of the examined crest from the superior border of the articular facet of the lateral malleolus (AFLM) to its most proximal intersection with the midline of the fibula, (B) height of the medial triangular rough surface, and (A/F) A/F ratio. RESULTS: The crest was observed in all specimens. (F) was 346.5 ± 26 mm (95% confidence interval [CI] 344-349), (LMC) was 85.4 ± 11.6 mm (95% CI 84.2-86.6), (A/F) was 25% ± 3% (95% CI 24.7-25.3) in the whole group. (A) was 25.9 ± 6.5 mm (95% CI 24.8-26.8) in the whole group, (B) was 34.9 ± 4.7 mm (95% CI 34.3-35.5) in the whole group, 36 ± 6.1 mm (95% CI 35.1-36.9). CONCLUSION: LMC is an important structure on the lateral malleolus. The knowledge of its anatomy is essential for placement of syndesmotic screws or/and the fibular plate.

Individual fascicles of the ankle lateral ligaments and the lateral fibulotalocalcaneal ligament complex can be identified on 3D volumetric MRI.

PURPOSE: Lateral ligament ankle sprains are common and the anatomy on imaging studies is vital for accurate diagnosis. The lateral fibulotalocalcaneal ligament (LFTCL) complex consists of the inferior fascicle of the anterior talofibular ligament (ATFL) which is connected by arciform fibres with the calcaneofibular ligament (CFL). The superior fascicle of ATFL is an independent structure that should be assessed individually. MRI evaluation of these distinct fascicles and the arciform fibres has not been described. The aim of this study is to identify the anatomical relationship of these components of the LFTCL complex in healthy individuals on MRI. METHODS: Thirty ankles from healthy volunteers were imaged using 3D volumetric MRI. The ATFL fascicles and size were evaluated. Presence of arciform fibres connecting the inferior ATFL fascicle and CFL to form the LFTCL complex and anatomical relationship around the lateral ligament complex were assessed. RESULTS: Both the superior and inferior ATFL fascicles were observed in 26 (86.7%) ankles. The superior ATFL fascicle was significantly larger in all specimens (39% longer and 80.7% wider). For the specimens with a single fascicle, this was similar in size to the superior fascicle observed in the other 26 specimens. These measurements were not affected by age or gender. Arciform fibres of the LFTCL complex were identified in 22 (84.6%) specimens with two ATFL fascicles and three (75%) ankles with a single ATFL fascicle. Connecting fibres from the ATFL to PTFL were observed in 19 (63.3%) ankles while connections between the CFL and PTFL were identified in 21 (70%) ankles. Five ankles had a perforating artery visualized in the intervening space between the superior and inferior ATFL fascicles (a branch of the lateral tarsal artery of the dorsalis pedis artery). CONCLUSION: Two distinct ATFL fascicles may be identified in the majority of ankles on MRI. Isolated injury to the superior fascicle identified on MRI may be useful when diagnosing patients presenting with symptoms of subtle instability without overt ankle laxity on clinical examination. The current study is the first to identify the arciform fibres of the LFTCL complex supporting isolated ATFL repair in the presence of intact LFTCL complex. LEVEL OF EVIDENCE: Level III.

Anatomy of the Sural Nerve in the Posterolateral Approach to the Ankle: A Cadaveric Study.

Sural nerve injury may occur during the posterolateral approach to the ankle during fracture fixation. We aimed to map its location in a posterolateral approach in cadaveric specimens. A posterolateral approach was used in 28 cadaver legs with the incision made halfway between the medial border of the fibula and the lateral border of Achilles tendon, extending proximally from the tip of the lateral malleolus. The sural nerve was identified and the distance from the distal tip of the incision to where it crossed the incision proximally was measured. The mean distance was 3.4 ± 1.2 (range 0.5-7.0) cm. In 22 cases (78.5%), the distance from the lowest part of the incision to the inferior part of the nerve was between 2.7 and 4.5 cm. The nerve did not cross the incision in 2 cases. We have demonstrated that the sural nerve crossed the posterolateral incision between 2.7 and 4.5 cm proximal to the tip of the fibula in the majority of cases. However, there remains individual anatomical variation, and we would recommend that care should be taken to look for the nerve closer to the Achilles tendon proximally and nearer the fibula distally. We hope that this information can help surgeons plan their approach and minimize iatrogenic injury to the sural nerve.

Major change in morphology of the talofibular ligaments during fetal development and growth.

BACKGROUND AND PURPOSE: Ankle sprain is often attributed to damage of the anterior and posterior talofibular ligaments (ATFL, PTFL). We compared the morphology of these ligaments in fetuses of different gestational ages (GAs) with the horizontal configuration in adults. MATERIALS AND METHODS: Histological sections of unilateral ankles were examined in 22 fetuses, 10 at GA of 9-12 weeks and 12 at GA of 26-39 weeks. RESULTS: At a GA of 9 to 10 weeks, the ATFL and PTFL consisted of horizontally running straight fibers. The initial ATFL appeared as a thickening of the capsule of the talocrural joint, although the initial PTFL was distant from this joint. Until a GA of 12 weeks, the talus and fibula were separated by an expanding joint cavity. Thus, the initial horizontal ligaments were "pulled" in a distal direction. The distal parts of the ligaments consisted of thin collagenous fibers that had an irregular array, whereas the short proximal parts had thick fibers and a horizontal array. In near-term fetuses, the ligaments contained no horizontal fibers. The ATFL had a wavy course around the thick synovial fold, and was exposed to the joint cavity along the entire course; the distal part was thinner than the proximal part. The PTFL was bulky and consisted of fibers with an irregular array. Therefore, the morphology in a near-term fetus was quite different from that in adults. CONCLUSION: The horizontal and straight composite ankle fibers in adults apparently result from postnatal reconstruction, depending on mechanical demand.

Surgical Anatomy for Fibular Free Flap Focusing on the Inferior Tibiofibular Syndesmotic System: A Cadaveric Study and Case Series of 3-Dimensional Prefabricate Cutting Guided Fibular Free Flap.

ABSTRACT: Even though there are many options for mandibular reconstruction, a free fibula osteocutaneous flap is regarded as the most frequently used flap. Despite having some previous anatomical studies pertaining to syndesmotic ligaments, there is no study pointing out that surgical landmarks can be used while free fibula osteocutaneous flaps are performed and used for surgical landmarks in order to avoid syndesmotic ligament injuries. Therefore, this study investigates the characteristics and relationship between inferior syndesmotic ligaments and fibula in cadavers. A total of 140 legs were obtained from 83 embalmed cadavers as well as other soft ones, which were donated for the inferior tibiofibular syndes- motic system's study. Detailed dissection and measurement of each ligament's distance to the end of the fibula and lateral malleolus were performed. Distances from the distal end of the fibula to anterior inferior tibiofibular ligament, posterior inferior tibiofibular, and inferior transverse ligament, and the lower border of the interosseous membrane are 3.5 ±â€Š0.4 cm, 3.4 ±â€Š0.5 cm, 1.9 ±â€Š0.4 cm, and 5 ±â€Š1 cm (mean ±â€ŠSD), respectively. Distance from the most distal part of the fibula to lateral malleolus is 1.6 ±â€Š0.4 cm (mean ±â€ŠSD). Thus, the remaining distance of the fibular should be left at least 4 cm without disrupting the syndesmotic ligament complex. It is argued that the lateral malleolus can be applied as a surgical landmark while harvesting fibula.

Fracturas del maleolo posterior del tobillo, clasificación y visión de tratamiento / Fractures of the Ankle Posterior Malleolus, Classification and Treatment Vision

Introducción: Las fracturas del maleolo posterior son comunes y son resultado de lesiones por rotación del tobillo que se ignoran debido a la reducción espontánea de estos fragmentos después de la reducción abierta del maléolo lateral. La tendencia actual es realizar la corrección anatómica de la articulación y evitar un escalón intraarticular. Objetivo: Revisar el estado actual de los conocimientos y clasificación de las fracturas del maleolo tibial posterior y las tendencias de su tratamiento. Métodos: Se realiza una revisión de la literatura en PubMed de los trabajos publicados en inglés entre los años 2011-2021, con los siguientes términos de búsqueda: fracturas del maleolo tibial posterior, clasificación de las fracturas del maléolo tibial posterior", tratamiento de las fracturas del maleolo tibial posterior". También se revisaron artículos accesibles de forma libre, o a través del servicio ClinicalKey e Hinari. Conclusiones: La reposición anatómica del maleolo tibial posterior en fracturas de tobillo permite alcanzar mejores resultados. Las clasificaciones y el abordaje posterolateral contribuyen a lograrlo(AU)

Introduction: Fractures of the posterior malleolus are common and resulting from rotational injuries of the ankle, which are ignored due to the spontaneous reduction of these fragments after open reduction of the lateral malleolus. The current trend is to perform the anatomical correction of the joint and to avoid an intra-articular step. Objective: To review the current state of knowledge and classification of posterior tibial malleolus fractures and treatment trends. Methods: A review was carried out of the PubMed literature of papers published in English in the period 2011-2021; the search terms adopted were posterior tibial malleolus fractures, posterior tibial malleolus fracture classification, reatment of fractures of the posterior tibial malleolus. Articles freely accessible or through Clinical Key and Hinari service were also reviewed. Conclusions: The anatomical repositioning of the posterior tibial malleolus in ankle fractures allows to achieve better results. The classifications and the posterolateral approach help to achieve this(AU)

Shape Approximation and Size Difference of the Upper Part of the Talus: Implication for Implant Design of the Talar Component for Total Ankle Replacement.

The implant design of the talar component for total ankle replacement (TAR) should match the surface morphology of the talus so that the replaced ankle can restore the natural motion of the tibiotalar joint and may reduce postoperative complications. The purpose of this study was to introduce a new 3D fitting method (the two-sphere fitting method of the talar trochlea with three fitting resection planes) to approximate the shape of the upper part of the talus for the Chinese population. 90 models of the tali from CT images of healthy volunteers were used in this study. Geometrical fitting and morphological measurements were performed for the surface morphology of the upper part of the talus. The accuracy of the two-sphere fitting method of the talar trochlea was assessed by a comparison of previously reported data. Parameters of the fitting geometries with different sizes were recorded and compared. Results showed that compared with previously reported one-sphere, cylinder, and bitruncated cone fitting methods, the two-sphere fitting method presented the smallest maximum distance difference, indicating that talar trochlea can be approximated well as two spheres. The radius of the medial fitting sphere R M was 20.69 ± 2.19 mm which was significantly smaller than the radius of the lateral fitting sphere R L of 21.32 ± 1.88 mm. After grouping all data by the average radius of fitting spheres, the result showed that different sizes of the upper part of the talus presented significantly different parameters except the orientation of the lateral cutting plane, indicating that the orientation of the lateral cutting plane may keep consistent for all upper part of the talus and have no relationship with the size. The linear regression analyses demonstrated a weak correlation (R 2 < 0.5) between the majority of parameters and the average radius of the fitting spheres. Therefore, different sizes of the upper part of the talus presented unique morphological features, and the design of different sizes of talar components for TAR should consider the size-specific characteristics of the talus. The parameters measured in this study provided a further understanding of the talus and can guide the design of different sizes of the talar components of the TAR implant.