Bacterial cellulose membrane functionalized with hydroxiapatite and anti-bone morphogenetic protein 2: A promising material for bone regeneration.

Bone tissue engineering seeks to adequately restore functions related to physical and biological properties, aiming at a repair process similar to natural bone. The use of compatible biopolymers, such as bacterial cellulose (BC), as well as having interesting mechanical characteristics, presents a slow in vivo degradation rate, and the ability to be chemically modified. To promote better bioactivity towards BC, we synthesized an innovative BC membrane associated to hydroxyapatite (HA) and anti-bone morphogenetic protein antibody (anti-BMP-2) (BC-HA-anti-BMP-2). We present the physical-chemical, biological and toxicological characterization of BC-HA-anti-BMP-2. Presence of BC and HA components in the membranes was confirmed by SEM-EDS and FTIR assays. No toxic potential was found in MC3T3-E1 cells by cytotoxicity assays (XTT Assay and Clonogenic Survival), genotoxicity (Comet Assay) and mutagenicity (Cytokinesis-blocked micronucleus Test). The in vitro release kinetics of anti-BMP-2 antibodies detected gradually reducing antibody levels, reducing approximately 70% in 7 days and 90% in 14 days. BC-HA-anti-BMP-2 increased SPP1, BGLAP, VEGF, ALPL, RUNX2 and TNFRSF11B expression, genes involved in bone repair and also increased mineralization nodules and phosphatase alcalin (ALP) activity levels. In conclusion, we developed BC-HA-anti-BMP-2 as an innovative and promising biomaterial with interesting physical-chemical and biological properties which may be a good alternative to treatment with commercial BMP-2 protein.

Impact of Site-Specific Conjugation of ScFv to Multifunctional Nanomedicines Using Second Generation Maleimide.

Biocompatible multifunctional nanomedicines (NMs) are known to be an attractive platform for targeted anticancer theranosis. However, these nanomedicines are of interest only if they efficiently target diseased cells and accumulate in tumors. Here we report the synthesis of a new generation of immunotargeted nanomedicines composed of a superparamagnetic iron oxide nanoparticle (SPION) core, polyethylene glycol coating and the anti-HER2 single chain fragment variable (scFv) of Trastuzumab antibody. We developed two novel bioengineered scFv carrying two cysteines located (i) at the end (4D5.1-cys2) or (ii) at the beginning (4D5.2-cys2) of its hexahistidine tag. The scFv bioconjugation was controlled via heterobifunctional linkers including a second generation maleimide (SGM). Our data indicated that the insertion of cysteines at the beginning of the hexahistidine tag was allowed to obtain nearly 2-fold conjugation efficiency (13 scFv/NP) compared to NMs using classical maleimide. As a result, the NMs-4D5.2 built using the optimal 4D5-cys2 and linkers equipped with SGM showed the enhanced recognition of HER2 in an ELISA format and on the surface of SK-BR-3 breast cancer cells in vitro. Their stability in serum was also significantly improved compared to the NMs-4D5. Our results showed the fundamental importance of the controlled ligand conjugation in the perspective of rational design of NMs with tailored physicochemical and biological properties.

Nano-encapsulation of chicken immunoglobulin (IgY) in sodium alginate nanoparticles: In vitro characterization.

Controlled delivery of therapeutic agents by alginate nanoparticles became an attractive issue in the gastric organ. Some therapeutic agents such as proteins could not tolerate in severe condition in the gastrointestinal tract. In the present study, four concentrations of a specific IgY as a prophylactic agent against E. coli O157: H7 was entrapped in 0.2% w/v sodium alginate nanoparticles by ionic gelation method. Depending on the IgY concentration entrapment efficacy was 28.31-99.84%. The physicochemical and structural characteristics of free and IgY-loaded Alg NPs revealed that the individual particles exhibited a spherical shape with a diameter of 45-85 nm, and a negatively charged surface with a zeta potential value of 26-36 mV. In vitro release study showed a high significant difference of released amounts of IgY at 10% and 99.84% in simulated gastric fluid (pH 1.2) and simulated intestine fluid (pH 6.8), respectively. Also, the quality and activity of released IgY from Alg NPs not changed. The cytotoxicity of different concentrations of Alg NPs on the Vero cells was measured. Our results indicated that Alg NPs prepared from 0.2%w/v stock solution could be appropriate candidates for efficient and safe delivery of IgY through the gastrointestinal tract.

3D printed lattices as an activation and expansion platform for T cell therapy.

One of the most significant hurdles to the affordable, accessible delivery of cell therapy is the cost and difficulty of expanding cells to clinically relevant numbers. Immunotherapy to prevent autoimmune disease, tolerate organ transplants or target cancer critically relies on the expansion of specialized T cell populations. We have designed 3D-printed cell culture lattices with highly organized micron-scale architectures, functionalized via plasma polymerization to bind monoclonal antibodies that trigger cell proliferation. This 3D technology platform facilitate the expansion of therapeutic human T cell subsets, including regulatory, effector, and cytotoxic T cells while maintaining the correct phenotype. Lentiviral gene delivery to T cells is enhanced in the presence of the lattices. Incorporation of the lattice format into existing cell culture vessels such as the G-Rex system is feasible. This cell expansion platform is user-friendly and expedites cell recovery and scale-up, making it ideal for translating T cell therapies from bench to bedside.

Effective antibodies immobilization and functionalized nanoparticles in a quartz-crystal microbalance-based immunosensor for the detection of parathion.

BACKGROUND: Biosensor-based detection provides a rapid and low-cost alternative to conventional analytical methods for revealing the presence of the contaminants in water as well as solid matrices. Although important to be detected, small analytes (few hundreds of Daltons) are an issue in biosensing since the signal they induce in the transducer, and specifically in a Quartz-Crystal Microbalance, is undetectable. A pesticide like parathion (M = 292 Da) is a typical example of contaminant for which a signal amplification procedure is desirable. METHODS/FINDINGS: The ballasting of the analyte by gold nanoparticles has been already applied to heavy target as proteins or bacteria to improve the limit of detection. In this paper, we extend the application of such a method to small analytes by showing that once the working surface of a Quartz-Crystal Microbalance (QCM) has been properly functionalized, a limit of detection lower than 1 ppb is reached for parathion. The effective surface functionalization is achieved by immobilizing antibodies upright oriented on the QCM gold surface by a simple photochemical technique (Photonic Immobilization Technique, PIT) based on the UV irradiation of the antibodies, whereas a simple protocol provided by the manufacturer is applied to functionalize the gold nanoparticles. Thus, in a non-competitive approach, the small analyte is made detectable by weighing it down through a "sandwich protocol" with a second antibody tethered to heavy gold nanoparticles. The immunosensor has been proved to be effective against the parathion while showing no cross reaction when a mixture of compounds very similar to parathion is analyzed. CONCLUSION/SIGNIFICANCE: The immunosensor described in this paper can be easily applied to any small molecule for which polyclonal antibodies are available since both the functionalization procedure of the QCM probe surface and gold nanoparticle can be applied to any IgG, thereby making our device of general application in terms of target analyte.

Biomechanical analysis of engineered bone with anti-BMP2 antibody immobilized on different scaffolds.

Recently we have demonstrated the ability of monoclonal antibodies (mAb) specific for bone morphogenetic protein (BMP)-2 immobilized on different scaffolds to mediate bone formation, a process referred to as Antibody Mediated Osseous Regeneration (AMOR). One of the key properties of regenerated bone is its biomechanical strength, in particular in load-bearing areas. This study sought to test the hypothesis that the biomechanical strength of regenerated bone depends of the mode of regeneration, as well as the scaffold used. Four different scaffolds, namely titanium granules (Ti), alginate hydrogel, anorganic bovine bone mineral (ABBM), and absorbable collagen sponge (ACS) were functionalized with anti-BMP-2 or isotype control mAb and implanted into rat critical-size calvarial defects. The morphology, density and strength of the regenerated bone were evaluated after 8 weeks. Results demonstrated that scaffolds functionalized with anti-BMP-2 mAb exhibited varying degrees of bone volume and density. Ti and ABBM achieved the highest bone volume, density, and strength of bone. When anti-BMP-2 mAb was immobilized on Ti or ABBM, the strength of the regenerated bone were 80% and 77% of native bone respectively, compared with 60% of native bone in sites implanted with rh-BMP-2. Control interventions with isotype mAb did not promote considerable bone regeneration and exhibited significantly lower mechanical properties. SEM analysis showed specimens immobilized with anti-BMP-2 mAb formed new bone with organized structure bridging the crack areas. Altogether, the present data demonstrated that the morphological and mechanical properties of bone bioengineered through AMOR could approximate that of native bone, when appropriate scaffolds are used. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1465-1473, 2016.

Synthesis of dual-functional targeting probes for cancer theranostics based on iron oxide nanoparticles coated by centipede-like polymer connected with pH-responsive anticancer drug.

A tumor-targeted and pH-responsive drug release system based on superparamagnetic iron oxide nanoparticles (IONPs) coated by poly(ethylene glycol) (PEG) and dodecylamine (DDA)-modified polyitaconic acid (PIA) connecting with bortezomib (BTZ) (PIA-PEG-DDA-BTZ@IOs) has been constructed and characterized. The anticancer drug BTZ was first conjugated using dopamine as the linker via catechol borate ester bond, which is acid cleavable and used as an ideal pH-responsive drug release system. The IONPs were then coated by PIA-PEG-DDA-BTZ to form micelles with good biocompatibility. The conjugates were further designed to target liver cancer cells overexpressing vascular endothelial growth factor (VEGF) by the targeting molecule anti-vascular endothelial growth factor (anti-VEGF). The magnetic resonance imaging showed that the targeting capability of IONPs-anti-VEGF conjugates to Hep G2 cells was more significant than that of non-anti-VEGF IONPs. From the above, this kind of novel dual-functional targeting probe could provide a new idea for the diagnosis and treatment of cancer.

Albumin-coated monodisperse magnetic poly(glycidyl methacrylate) microspheres with immobilized antibodies: application to the capture of epithelial cancer cells.

Monodisperse (4 µm) macroporous crosslinked poly(glycidyl methacrylate) (PGMA) microspheres for use in microfluidic immunomagnetic cell sorting, with a specific application to the capture of circulating tumor cells (CTCs), were prepared by multistep swelling polymerization in the presence of cyclohexyl acetate porogen and hydrolyzed and ammonolyzed. Iron oxide was then precipitated in the microspheres to render them magnetic. Repeated precipitation made possible to raise the iron oxide content to more than 30 wt %. To minimize nonspecific adsorption of the microspheres in a microchannel and of cells on the microspheres, they were coated with albumin crosslinked with glutaraldehyde. Antibodies of epithelial cell adhesion molecule (anti-EpCAM) were then immobilized on the albumin-coated magnetic microspheres using the carbodiimide method. Capture of breast cancer MCF7 cells as a model of CTCs by the microspheres with immobilized anti-EpCAM IgG was performed in a batch experiment. Finally, MCF7 cells were captured by the anti-EpCAM-immobilized albumin-coated magnetic microspheres in an Ephesia chip. A very good rejection of lymphocytes was achieved. Thus, albumin-coated monodisperse magnetic PGMA microspheres with immobilized anti-EpCAM seem to be promising for capture of CTCs in a microfluidic device.

Antibody-directed targeting of lysostaphin adsorbed onto polylactide nanoparticles increases its antimicrobial activity against S. aureus in vitro.

The objective of this paper was to study the effect of antibody-directed targeting of S. aureus by comparing the activities of lysostaphin conjugated to biodegradable polylactide nanoparticles (NPs) in the presence and in the absence of co-immobilized anti-S. aureus antibody. Lysostaphin-antibody-NP conjugates were synthesized through physical adsorption at different enzyme:antibody:NP ratios. The synthesized enzyme-NP conjugates were characterized by means of dynamic light scattering and zeta potential analysis, and the total protein binding yield on the NPs was characterized using Alexa Fluor 350 and 594 dyes for the S. aureus antibody and lysostaphin respectively. We observed enhanced antimicrobial activity for both enzyme-coated and enzyme-antibody-coated NPs for lysostaphin coatings corresponding to ∼ 40% of the initial monolayer and higher compared to the free enzyme case (p < 0.05). At the highest antibody coating concentration, bacterial lysis rates for antibody-coated samples were significantly higher than for lysostaphin-coated samples lacking the antibody (p < 0.05). Such enzyme-NP conjugates thus have the potential for becoming novel therapeutic agents for treating antibiotic-resistant S. aureus infections.

Continuous separation of cells of high osteoblastic differentiation potential from mesenchymal stem cells on an antibody-immobilized column.

Here, we report that two distinctive cell populations with osteoblastic differentiation ability were found in adherent cell populations from bone marrow. Mesenchymal stem cells (MSCs) were conventionally isolated by using adherent property of bone marrow cells onto a plastic culture dish. MSCs enriched on the basis of their adherent property were considered phenotypically and functionally heterogeneous. We developed a ligand-immobilized surface for separating subpopulation of adherent cells derived from bone marrow by the cell rolling process. We successfully isolate two cell populations with high differentiation ability for osteoblasts in adherent bone marrow cells by using the anti-CD34 antibody-immobilized column. The antibody was covalently conjugated with polyacrylic acid and introduced onto the inner surface of a silicone tube. When cell suspension of MSCs was injected into the antibody-immobilized column, different cell populations were isolated. After the cultivation of isolated cells in the osteoblastic differentiation medium for 1 week, few sub-populations were strongly induced to form osteoblastic cells. This study revealed that the ligand-immobilized surface can be used to continually separate cell populations under a labeling-free condition.

Antibody array platform to monitor protein tyrosine phosphorylation in mammalian cells.

Protein tyrosine phosphorylation plays a central role in cell-signaling and is a focus of biomedical studies and cancer therapy. However, it is still challenging to identify or characterize the coordinated changes of many candidate proteins of one particular pathway or multiple pathways simultaneously. Antibody array is a recently developed approach applied for differential analysis of multiple protein posttranslational modification events in mammalian cells. It is based on the highly specific recognition between the immobilized antibodies on the array and their specific target proteins in a high-throughput screening format. Here we have described in detail two methods for differential analysis of protein tyrosine phosphorylation in cells by (1) using a single fluorescent protein capture format on membrane array and (2) a competitive protein capture method on glass surface array.

Protein tyrosine kinase characterization based on fully automated synthesis of (phospho) peptide arrays in microplates.

In view of the importance of information transfer mediated throughout the cell by recognition, phosphorylation or dephosphorylation of kinases, their adapters, or substrates, this method was developed. The method provides a potent research tool for rapidly generating and testing these substrates as modeled by synthetic peptide arrays. The peptides or phosphorylated peptides are automatically generated on the inner surfaces of microplate wells, covalently linked to a polylysine polymer so that they are in a sterically favorable conformation, immediately available for in situ testing. Products up to 18 amino acids long have shown excellent mass spectral homogeneity. Thus, determinate peptide libraries can be ready for testing in as little as 2 days after the conception of an experiment. The process can be easily automated using robotic liquid handlers and is extremely rapid, sensitive, and economical. Optionally, the method can be upgraded to a higher throughput level using more powerful workstations with greater capacity, such as the Biomek FX, or any similar robotics capable of transfer-from-file logic to guide synthesis cycles.