Safety Considerations for Outpatient Arthroplasty.

Since 2018, the number of total joint arthroplasties (TJAs) performed on an outpatient basis has dramatically increased. Both surgeon and anesthesiologist should be aware of the implications for the safety of outpatient TJAs and potential patient risk factors that could alter this safety profile. Although smaller studies suggest that the risk of negative outcomes is equivalent when comparing outpatient and inpatient arthroplasty, larger database analyses suggest that, even when matched for comorbidities, patients undergoing outpatient arthroplasty may be at increased risk of surgical or medical complications. Appropriate patient selection is critical for the success of any outpatient arthroplasty program. Potential exclusion criteria for outpatient TJA may include age greater than 75 years, bleeding disorder, history of deep vein thrombosis, uncontrolled diabetes mellitus, and hypoalbuminemia, among others. Patient optimization before surgery is also warranted. The potential risks of same-day versus next-day discharge have yet to be elicited in a large-scale manner.

Upcoming evidence in clinical practice of two-stage revision arthroplasty for prosthetic joint infection.

Total joint arthroplasty is the recommended treatment for patients with end-stage osteoarthritis, as it reduces disability and pain and restores joint function. However, prosthetic joint infection is a serious complication of this procedure, with the two-stage exchange being the most common treatment method. While there is consensus on diagnosing prosthetic joint infection, there is a lack of agreement on the parameters that can guide the surgeon in performing definitive reimplantation in a two-stage procedure. One approach that has been suggested to improve the accuracy of microbiologic investigations before definitive reimplantation is to observe a holiday period from antibiotic therapy to improve the accuracy of cultures from periprosthetic tissues, but these cultures report some degree of aspecificity. Therefore, several pieces of evidence highlight that performing reimplantation using continuous antibiotic therapy should be considered a safe and effective approach, leading to higher cure rates and a shorter period of disability. Dosage of C-reactive protein (CRP), erythrocyte sedimentation rate (ERS) and D-dimer are helpful in diagnosing prosthetic joint infection, but only D-dimer has shown sufficient accuracy in predicting the risk of infection recurrence after a two-stage procedure. Synovial fluid analysis before reimplantation has been shown to be the most accurate in predicting recurrence, and new cutoff values for leukocyte count and neutrophil percentage have shown a useful predictive rule to identify patients at risk of unfavourable outcome. A new scoring system based on a numerical score calculated from the beta coefficient derived through multivariate analysis of D-dimer levels, synovial fluid leukocytes and relative neutrophils percentage has demonstrated high accuracy when it comes to guiding the second step of two-stage procedure. In conclusion, reimplantation may be a suitable option for patients who are on continuous therapy without local symptoms, and with CRP and ERS within the normal range, with low synovial fluid leukocytes (< 952/mL) and a low relative neutrophil percentage (< 52%) and D-dimer below 1100 µg/mL. A numerical score derived from analysing these three parameters can serve as a valuable tool in determining the feasibility of reimplantation in these patients.

Biofilm on total joint replacement materials can be reduced through electromagnetic induction heating using a portable device.

BACKGROUND: Periprosthetic joint infection is a serious complication following joint replacement. The development of bacterial biofilms bestows antibiotic resistance and restricts treatment via implant retention surgery. Electromagnetic induction heating is a novel technique for antibacterial treatment of metallic surfaces that has demonstrated in-vitro efficacy. Previous studies have always employed stationary, non-portable devices. This study aims to assess the in-vitro efficacy of induction-heating disinfection of metallic surfaces using a new Portable Disinfection System based on Induction Heating. METHODS: Mature biofilms of three bacterial species: S. epidermidis ATCC 35,984, S. aureus ATCC 25,923, E. coli ATCC 25,922, were grown on 18 × 2 mm cylindrical coupons of Titanium-Aluminium-Vanadium (Ti6Al4V) or Cobalt-chromium-molybdenum (CoCrMo) alloys. Study intervention was induction-heating of the coupon surface up to 70ºC for 210s, performed using the Portable Disinfection System (PDSIH). Temperature was monitored using thermographic imaging. For each bacterial strain and each metallic alloy, experiments and controls were conducted in triplicate. Bacterial load was quantified through scraping and drop plate techniques. Data were evaluated using non-parametric Mann-Whitney U test for 2 group comparison. Statistical significance was fixed at p ≤ 0.05. RESULTS: All bacterial strains showed a statistically significant reduction of CFU per surface area in both materials. Bacterial load reduction amounted to 0.507 and 0.602 Log10 CFU/mL for S. aureus on Ti6Al4V and CoCrMo respectively, 5.937 and 3.500 Log10 CFU/mL for E. coli, and 1.222 and 0.372 Log10 CFU/mL for S. epidermidis. CONCLUSIONS: Electromagnetic induction heating using PDSIH is efficacious to reduce mature biofilms of S aureus, E coli and S epidermidis growing on metallic surfaces of Ti6Al4V and CoCrMo alloys.

Long-Term Outcomes of Wrist Arthroplasty Using the ReMotion™ Implant in Non-inflammatory Wrist Pathology.

Background: Wrist arthroplasty is increasingly offered to patients with symptomatic wrist arthritis as an alternative to wrist arthrodesis. The purpose of this study was to present our outcomes with the ReMotion™ wrist arthroplasty in a consecutive series of patients with wrist arthritis from non-inflammatory conditions. Methods: Thirteen (eight women, nine dominant wrists) patients, 68 (44-85) years of age with advanced radiocarpal arthritis due to SLAC/SNAC (11) and Kienbock disease (2) had a ReMotion™ (Stryker, Michigan, USA) wrist arthroplasty implanted, and were prospectively followed for 7 (4-9) years. The outcome measures included patient-rated wrist and hand evaluation (PRWHE) score, disabilities of the arm, shoulder and hand questionnaire (QuickDASH) score, visual analogue pain score (0-10) on the radial and ulnar aspect of the wrist at rest (VASrR/VASuR) and activity (VASrA/VASuA), active wrist range of motion (AROM) including flexion, extension, ulnar and radial deviation, pronation and supination and grip and key-pinch strength measured preoperatively and at yearly follow-ups by independent hand therapists. Results: Six patients had ten re-operations during the follow-up including four revisions to a new arthroplasty. Four were considered loose at follow-up. A significant reduction in PRWHE (63 to 12), radial pain at activity (6 to 1) and increased pronation (85° v 90°) was observed. Conclusions: We found a high complication and reoperation rate, two out of 13 had no complications or reoperations. The ReMotion™ arthroplasty should be used with caution in non-inflammatory wrist patients and the patients followed closely. A high reoperation and revision rate can be expected, and surgeons familiar with revision arthroplasty procedures should perform the surgery. Level of Evidence: Level II (Therapeutic).

Patients' perspective of fast-track total joint arthroplasty: a systematic review.

The introduction of fast-track protocols decreased length of hospital stay and improved rehabilitation and outcomes in total joint arthroplasty. Despite improved clinical results published in many papers, the patient perspective of these protocols is less investigated. Purpose of this study was to explore the patient perspective of fast-track protocols in arthroplasty. A systematic search for articles of patient experiences in total hip, knee, and shoulder arthroplasty was conducted using EMBASE, MEDLINE, Cochrane, and Web-of-Science for articles published from inception to February 14, 2023. In total 12 studies were included involving 672 patients. Most patients were satisfied with short length of hospital stay and preferred rehabilitation at home with relatives for support. Various experiences were reported regarding pain and postoperative out of hospital physical therapy. Frequently, feelings of insecurity were reported because of lack of personalized information. Based on current qualitative literature, patients are satisfied with short length of hospital stay in fast-track total joint arthroplasty. Improvements in personalized information and physical therapy protocols is needed.

Mid- and long-term clinical results of the Elektra and Moovis prosthesis for trapeziometacarpal joint replacement.

BACKGROUND: Total joint arthroplasty as a surgical treatment option for trapeziometacarpal joint arthritis is recently revived. The aim of this study is to report on mid- and long-term results of the Elektra (single-mobility) and Moovis (dual-mobility) prosthesis for treatment of primary thumb carpometacarpal joint arthritis. METHODS: In this retrospective, monocentric, descriptive cohort study, 31 prostheses were evaluated that were implanted by a single surgeon in 26 patients between 2009 and 2019. Indication for surgery was trapeziometacarpal joint osteoarthritis (Eaton/Littler Stage II and III). Clinical and radiological follow-up was performed at a minimum of 24 months. The postoperative assessment included range of motion, pain, strength as well as functional scores (DASH, MHQ). Implant survival and complications were the primary endpoints. RESULTS: 10 Elektra and 21 Moovis prostheses were implanted between 2009 and 2019 with a mean follow-up of 74.2 months in the Elektra and 41.4 months in the Moovis group. The average patients' age at surgery was 64 years. Postoperative pain levels (VAS 0-10) were below 2 at rest and under stress in both groups. Grip/pinch strength and range of motion showed results comparable to the contralateral hand. Opposition was excellent with an average Kapandji index of 9.6 in both groups. Elektra achieved slightly better functional scores in the DASH and MHQ score. Satisfaction was high in both groups, and 96% of the patients would recommend the procedure. Metacarpophalangeal hyperextension > 15° was seen in 3 patients per group preoperatively and was corrected to < 5° post-surgery. 3 Elektra prostheses were revised due to cup loosening and dislocation for cup and/or neck replacement or secondary trapeziectomy. 1 Moovis prosthesis was revised with an exchange of the neck to a larger size due to restricted movement. After the mean follow-up of 7.9 years in Elektra and 3.5 years in MOOVIS, cumulative survival was 68.6% vs. 95.2%, respectively. CONCLUSIONS: In this mid- to long-term retrospective analysis, total joint arthroplasty in primary trapeziometacarpal joint arthritis results in low pain levels, excellent mobility and clinical function. Patient satisfaction is overall high. While revision due to cup loosening occurred more often in patients with single-mobility implants, no cases of dislocation or loosening of components were observed in the dual-mobility group. TRIAL REGISTRATION: The study was conducted in accordance with the Declaration of Helsinki, and approved by the Ethics Committee of the Medical Faculty of Heidelberg University, reference number S-150/2020.

Current thinking in open temporomandibular joint surgery. Is this still indicated in the management of articular temporomandibular joint disorder?

Management of temporomandibular disorders (TMD) follows a stepwise approach of conservative management, minimally invasive surgery (arthrocentesis and arthroscopy), open surgery and alloplastic replacement. The majority of patients treated in primary care and managed initially in secondary care have myofascial pain and can be managed conservatively with rest, topical NSAIDs, muscle massage, and a bite orthosis. Those who fail to improve and have articular related pain with limitation of function should initially undergo arthroscopic investigation and arthrocentesis, which is effective at resolving symptoms in 80% of patients. Arthroscopy provides the best diagnostic aid should there be a failure to improve and should enable the surgeon to appropriately plan open surgery. Historically, surgical intervention was based on a 'one size fits all' philosophy with the surgeon carrying out a procedure which they are used to doing regardless of the pathology. Prior to arthroscopy this carried an '80% chance of getting 80% better' regardless of approach. Prior arthroscopy reduced success rates to 50%-60% and a better success rate is needed. Basing surgical intervention on the pathology encountered is a sensible approach to joint management, with the surgeon performing surgery on the articular surfaces or disc as indicated. Having used this approach over the last 15 years the author has achieved success rates of 80% in the longer term and this philosophy, rationale, and technique will be discussed along with analysis of more recent publications in the field.

Novel Use of Virtual Reality and Augmented Reality in Temporomandibular Total Joint Replacement Using Stock Prosthesis.

This technical innovation demonstrates the use of ImmersiveTouch Virtual Reality (VR) and Augmented Reality (AR)-guided total temporomandibular joint replacement (TJR) using Biomet stock prosthesis in 2 patients with condylar degeneration. TJR VR planning includes condylar resection, prosthesis selection and positioning, and interference identification. AR provides real-time guidance for osteotomies, placement of prostheses and fixation screws, occlusion verification, and flexibility to modify the surgical course. Radiographic analysis demonstrated high correspondence between the preoperative plan and postoperative result. The average differences in the positioning of the condylar and fossa prosthesis are 1.252 ± 0.269 mm and 1.393 ± 0.335 mm, respectively. The main challenges include a steep learning curve, intraoperative technical difficulties, added surgical time, and additional costs. In conclusion, the case report demonstrates the advantages of implementing AR and VR technology in TJR's using stock prostheses as a pilot study. Further clinical trials are needed prior to this innovation becoming a mainstream practice.

A multicenter, randomized controlled trial comparing a second-generation uncemented trabecular metal-backed vs. cemented polyethylene glenoid component in total shoulder arthroplasty: 5-year results.

BACKGROUND: Previously, we reported early (2-year) findings from a randomized controlled trial comparing a second-generation uncemented trabecular metal-backed (TM) glenoid vs. cemented polyethylene glenoid (POLY) in patients undergoing a total shoulder arthroplasty. The purpose of the current study is to report disease-specific quality of life, clinical, patient-reported, and radiographic outcomes at midterm (5-year) from this trial. METHODS: Five surgeons from 3 centers participated. Patients 18-79 years with a primary diagnosis of glenohumeral osteoarthritis were screened for eligibility. Randomization to an uncemented TM or cemented POLY glenoid was performed intra-operatively after adequate bone stock was confirmed. Study intervals were baseline, 2- and 5-year postoperative. The primary outcome was the Western Ontario Osteoarthritis Shoulder (WOOS) quality of life score. Secondary outcomes included the American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form, EuroQol-5 Dimensions, and 12-Item Short Form Health Survey scores and clinical and radiographic examinations. Radiographic images were reviewed for metal debris according to Endrizzi. Mixed effects repeated measures analysis of variance for within- and between-group comparisons were performed. RESULTS: Of the 104 patients who consented, 93 were randomized (46 TM; 47 POLY). There were no differences between groups at baseline (TM: mean age 66.5 years [standard deviation (SD) 6.4], 24 male and 22 female; and POLY: mean age 68.4 years [SD 5.5], 23 male / 24 female). Mean (SD) WOOS scores at baseline and 2 and 5 years were as follows: TM, 32 (21), 92 (13), and 93 (11); POLY, 27 (15), 93 (11), and 93 (10), respectively. No statistical or clinically relevant differences were noted with patient-reported outcomes between groups. Metal debris was observed in 11 (23.9%) patients, but outcomes were not negatively impacted, and debris severity was minor (grades 1 and 2). Complication rates were similar between groups (TM: 7 of 46 [15.2%], and POLY: 8 of 47 [17.0%]; P = .813). No aseptic glenoid failures were reported, but 1 patient in the TM group required revision because of infection. CONCLUSIONS: Our short-term (2-year) findings were maintained with longer follow-up. At 5 years postoperation, there were no statistically or clinically significant differences between an uncemented second-generation TM glenoid and a cemented polyethylene glenoid with respect to disease-specific quality of life or patient-reported outcomes. No glenoid implant failures were reported, and complication rates were similar between groups. Only one complication was glenoid related (1 infection in the TM group). Metal debris was observed in 23.9% of patients with a TM glenoid but did not negatively influence implant survival, patient-reported outcomes, or shoulder function.

Long-term results of the AptisTM total distal radioulnar joint prosthesis after previous failed surgical procedures.

We present a prospective study with the results of ten Aptis total distal radioulnar joint replacements in patients who had one to five previous operations. The mean postoperative follow-up was 9.7 years (range 3-14.7). The mean postoperative range of motion of the wrist improved by 9° for extension, 15° for flexion, 10° for pronation and 14° for supination, achieving values equivalent to 88%, 78%, 97% and 88% of those of the non-operated hand. There were minimal changes in radial and ulnar deviations. Grip strength improved by 7 kg, pain decreased by 8 points, QuickDASH and Mayo wrist scores improved by 51 and 53 points, respectively. Two implants had radiolucency less than 1 mm. Serum titanium ion levels were slightly elevated in two patients. Three prostheses required revision surgery for heterotopic ossification, a prominent radial screw and a periprosthetic fracture. No prostheses were removed. Six patients returned to their former professional activities and four patients adapted their jobs.Level of evidence: IV.

Reliability assessment of new radiographic scales to evaluate radiolucency and bony in-between fin growth of partially cemented all-polyethylene glenoid components.

BACKGROUND: Current methods available for assessment of radiolucency and in-between fin (IBF) growth of a glenoid component have not undergone interobserver reliability testing for an all-polyethylene fluted central peg (FCP) glenoid. The purpose of this study was to evaluate anteroposterior radiographs of an FCP glenoid component at ≥48 months comparing commonly used scales to a new method adapted to the FCP. Our hypothesis was that the new method would result in acceptable intra- and interobserver agreement and a more accurate description of radiographic findings. METHODS: We reviewed ≥48-month follow-up radiographs of patients treated with a primary aTSA using an FCP glenoid. Eighty-three patients were included in the review. Radiographs were evaluated by 5 reviewers using novel IBF radiodensity and radiolucency assessments and the Wirth and Lazarus methods. To assess intraobserver reliability, a subset of 40 images was reviewed. Kappa statistics were calculated to determine intra- and interobserver reliability; correlations were assessed using Pearson correlation. RESULTS: Interobserver agreement (κ score) was as follows: IBF 0.71, radiolucency 0.68, Wirth 0.48, and Lazarus 0.22. Intraobserver agreement ranges were as follows: IBF radiodensity 0.36-0.67, radiolucency 0.55-0.62, Wirth 0.11-0.73, and Lazarus 0.04-0.46. Correlation analysis revealed the following: IBF to Wirth r = 0.93, radiolucency to Lazarus r = 0.92 (P value <.001 for all). CONCLUSION: This study introduces a radiographic assessment method developed specifically for an FCP glenoid component. Results show high interobserver and acceptable intraobserver reliability for the method presented in this study. The new scales provide a more accurate description of radiographic findings, helping to identify glenoid components that may be at risk for loosening.

Validation of mixed-reality surgical navigation for glenoid axis pin placement in shoulder arthroplasty using a cadaveric model.

BACKGROUND: Mixed reality may offer an alternative for computer-assisted navigation in shoulder arthroplasty. The purpose of this study was to determine the accuracy and precision of mixed-reality guidance for the placement of the glenoid axis pin in cadaver specimens. This step is essential for accurate glenoid placement in total shoulder arthroplasty. METHODS: Fourteen cadaveric shoulders underwent simulated shoulder replacement surgery by 7 experienced shoulder surgeons. The surgeons exposed the cadavers through a deltopectoral approach and then used mixed-reality surgical navigation to insert a guide pin in a preplanned position and trajectory in the glenoid. The mixed-reality system used the Microsoft Hololens 2 headset, navigation software, dedicated instruments with fiducial marker cubes, and a securing pin. Computed tomography scans obtained before and after the procedure were used to plan the surgeries and determine the difference between the planned and executed values for the entry point, version, and inclination. One specimen had to be discarded from the analysis because the guide pin was removed accidentally before obtaining the postprocedure computed tomography scan. RESULTS: Regarding the navigated entry point on the glenoid, the mean difference between planned and executed values was 1.7 ± 0.8 mm; this difference was 1.2 ± 0.6 mm in the superior-inferior direction and 0.9 ± 0.8 mm in the anterior-posterior direction. The maximum deviation from the entry point for all 13 specimens analyzed was 3.1 mm. Regarding version, the mean difference between planned and executed version values was 1.6° ± 1.2°, with a maximum deviation in version for all 13 specimens of 4.1°. Regarding inclination, the mean angular difference was 1.7° ± 1.5°, with a maximum deviation in inclination of 5°. CONCLUSIONS: The mixed-reality navigation system used in this study allowed surgeons to insert the glenoid guide pin on average within 2 mm from the planned entry point and within 2° of version and inclination. The navigated values did not exceed 3 mm or 5°, respectively, for any of the specimens analyzed. This approach may help surgeons more accurately place the definitive glenoid component.

Thumb basal joint arthritis in 2023.

Thumb carpometacarpal or basal joint arthritis is the second most common location for osteoarthritis in the hand. It mainly affects women over 50years of age. Basal joint arthritis causes pain, loss of strength during pinch grips, and eventually stiffness and progressive deformity of the thumb column. Conservative treatment must be implemented first. It aims to spare the joint by using standardized methods. It must be initiated as soon as pain starts, not once the deformity has settled in. There is broad agreement that surgery is indicated when pain relief is not achieved after at least 6months of conservative treatment. The available surgical techniques can be classified as joint-sparing (extra-articular) and joint-sacrificing (intra-articular). The former consists of trapeziometacarpal stabilizing ligament reconstruction, subtraction osteotomy of the first metacarpal and thumb carpometacarpal denervation. The latter consists of trapeziometacarpal fusion, trapeziectomy (and its variants) and implant arthroplasty. Except in very specific cases, trapeziectomy and trapeziometacarpal implant arthroplasty with a total joint prosthesis or an interposition implant are the two main surgical techniques for treating basal joint arthritis. After reviewing the pathophysiology and the diagnosis of thumb basal joint arthritis, we will provide an overview of the available treatment options, with emphasis on the accepted surgical strategies in 2023. LEVEL OF EVIDENCE: III.

Hybrid total alloplastic temporomandibular joint replacement prosthesis: a pilot study to evaluate feasibility, functional performance and impact on post-operative quality of life.

PURPOSE: The aim of the present study was to investigate the clinical efficiency of hybrid alloplastic temporomandibular joint (TMJ) prosthesis in patients undergoing TMJ total alloplastic joint replacement (TMJR). The prosthesis utilized for this study for TMJR is a hybrid variant with combination of stock prototype design and a partial customization of components. MATERIALS AND METHODS: A prospective clinical study was conducted involving five patients with unilateral TMJ ankylosis or end-stage joint disease (ESJD) indicated for and requiring TMJR. The patients underwent resection of the joint or gap arthroplasty followed by TMJR using the hybrid alloplastic TMJ prosthesis. The subjective and objective variables that included the jaw function (JF), inter-incisal opening (IO), diet intake (DI) and quality of life (QoL) were assessed using the psychometric modified Likert scale. The nutritional status of the patients was evaluated using the mid-upper arm circumference (MUAC) as reference. RESULTS: The assessed study variables demonstrated functional and observational improvement in the post-operative follow-up when compared to the pre-operative period. The patients showed an improvement in overall QoL and nutritional status post-operatively. The follow-up period showed subjective and objective improvement in the parameters assessed among the study population. CONCLUSION: There is a technical and clinical feasibility to utilize the hybrid alloplastic TMJ prosthesis as a reliable alloplastic option for treating patients requiring TMJR, with prudent indications.

Treatment of Glenoid Wear with the Use of Augmented Glenoid Components in Total Shoulder Arthroplasty: A Scoping Review.

¼ Treatment of glenoid bone loss continues to be a challenge in total shoulder arthroplasty (TSA). Although correcting glenoid wear to patient's native anatomy is desirable in TSA, there is lack of consensus regarding how much glenoid wear correction is acceptable and necessary in both anatomic and reverse TSA.¼ Use of augmented glenoid components is a relatively new treatment strategy for addressing moderate-to-severe glenoid wear in TSA. Augmented glenoid components allow for predictable and easy correction of glenoid wear in the coronal and/or axial planes while at the same time maximizing implant seating, improving rotator cuff biomechanics, and preserving glenoid bone stock because of off-axis glenoid reaming.¼ Augmented glenoid components have distinct advantages over glenoid bone grafting. Glenoid bone grafting is technically demanding, adds to the surgical time, and carries a risk of nonunion and graft resorption with subsequent failure of the glenoid component.¼ The use of augmented glenoid components in TSA is steadily increasing with easy availability of computed tomography-based preoperative planning software and guidance technology (patient-specific instrumentation and computer navigation).¼ Although different augment designs (full wedge, half wedge, and step cut) are available and a particular design may provide advantages in specific glenoid wear patterns to minimize bone removal (i.e. a half wedge in B2 glenoids), there is no evidence to demonstrate the superiority of 1 design over others.

Automated Shoulder Implant Manufacturer Detection using Encoder Decoder based Classifier from X-ray Images.

Total shoulder arthroplasty is the process of replacing the damaged ball and socket joint in the shoulder with a prosthesis made with polyethylene and metal components. The prosthesis helps to restore the normal range of motion and reduce pain, enabling the patient to return to their daily activities. These implants may need to be replaced over the years due to damage or wear and tear. It is a tedious and time-consuming process to identify the type of implant if medical records are not properly maintained. Artificial intelligence systems can speed up the treatment process by classifying the manufacturer and model of the prosthesis. We have proposed an encoder-decoder based classifier along with the supervised contrastive loss function that can identify the implant manufacturer effectively with increased accuracy of 92% from X-ray images overcoming the class imbalance problem.

Trial of Vancomycin and Cefazolin as Surgical Prophylaxis in Arthroplasty.

BACKGROUND: The addition of vancomycin to beta-lactam prophylaxis in arthroplasty may reduce surgical-site infections; however, the efficacy and safety are unclear. METHODS: In this multicenter, double-blind, superiority, placebo-controlled trial, we randomly assigned adult patients without known methicillin-resistant Staphylococcus aureus (MRSA) colonization who were undergoing arthroplasty to receive 1.5 g of vancomycin or normal saline placebo, in addition to cefazolin prophylaxis. The primary outcome was surgical-site infection within 90 days after surgery. RESULTS: A total of 4239 patients underwent randomization. Among 4113 patients in the modified intention-to-treat population (2233 undergoing knee arthroplasty, 1850 undergoing hip arthroplasty, and 30 undergoing shoulder arthroplasty), surgical-site infections occurred in 91 of 2044 patients (4.5%) in the vancomycin group and in 72 of 2069 patients (3.5%) in the placebo group (relative risk, 1.28; 95% confidence interval [CI], 0.94 to 1.73; P = 0.11). Among patients undergoing knee arthroplasty, surgical-site infections occurred in 63 of 1109 patients (5.7%) in the vancomyin group and in 42 of 1124 patients (3.7%) in the placebo group (relative risk, 1.52; 95% CI, 1.04 to 2.23). Among patients undergoing hip arthroplasty, surgical-site infections occurred in 28 of 920 patients (3.0%) in the vancomyin group and in 29 of 930 patients (3.1%) in the placebo group (relative risk, 0.98; 95% CI, 0.59 to 1.63). Adverse events occurred in 35 of 2010 patients (1.7%) in the vancomycin group and in 35 of 2030 patients (1.7%) in the placebo group, including hypersensitivity reactions in 24 of 2010 patients (1.2%) and 11 of 2030 patients (0.5%), respectively (relative risk, 2.20; 95% CI, 1.08 to 4.49), and acute kidney injury in 42 of 2010 patients (2.1%) and 74 of 2030 patients (3.6%), respectively (relative risk, 0.57; 95% CI, 0.39 to 0.83). CONCLUSIONS: The addition of vancomycin to cefazolin prophylaxis was not superior to placebo for the prevention of surgical-site infections in arthroplasty among patients without known MRSA colonization. (Funded by the Australian National Health and Medical Research Council; Australian New Zealand Clinical Trials Registry number, ACTRN12618000642280.).

Wrist arthrodesis combined with a bulk bone allograft for implant loosening after total wrist arthroplasty: A case report.

Total wrist arthroplasty (TWA) is a challenging procedure for wrist joints severely destroyed by rheumatoid arthritis. The most common postoperative complication of TWAs is the loosening of the carpal component. Revision surgeries for failed TWAs can be complicated owing to severe bone loss and concomitant soft-tissue problems. Here, we report a case (68-year-old woman with a history of rheumatoid arthritis for 24 years) of severe aseptic loosening of semi-constrained TWA and its salvage surgery. During the primary arthroplasty procedure, severe instability at the second through fifth carpometacarpal joints was observed and arthrodesis of these joints was required. The radiographs obtained 9 months after surgery showed loosening of the carpal component. Subsequently, she suffered a stroke, resulting in a loss of follow-up, and higher stress was loaded on her upper extremities during standing and walking. In the radiograph taken at her revisit 25 months after the primary surgery, the subsidence of the carpal component progressed and loosening of the radial component was observed. Total wrist arthrodesis was performed using a bulk bone allograft of the femoral head, combined with a penetrating Wrist Fusion Rod®. Rapid bone union was achieved without soft-tissue irritation. We conclude that wrist arthrodesis with a bulk bone allograft combined with an intramedullary nail is a reasonable option for failed total wrist arthroplasty.

Wrist Arthritis and Arthrodesis: Preserving Function, Minimizing Problems.

Wrist arthritis is a common condition with numerous causes and presentations. Several management options exist, and treatment should be individualized based on patient age, comorbidities, occupation, duration of symptoms, and failed treatment modalities. Arthroscopy and denervation are appealing because of shorter recovery time and preservation of motion, but duration of effectiveness varies between patients. Patients who fail these smaller procedures or those with pancarpal arthrosis are treated effectively with total wrist arthrodesis or total wrist arthroplasty in lower-demand patients. This article reviews causes and patterns of wrist arthritis and discusses treatment strategies aimed at preserving function and minimizing complications.