Membrane insertion mechanism and molecular assembly of the bacteriophage lysis toxin ΦX174-E.

The bacteriophage ΦX174 causes large pore formation in Escherichia coli and related bacteria. Lysis is mediated by the small membrane-bound toxin ΦX174-E, which is composed of a transmembrane domain and a soluble domain. The toxin requires activation by the bacterial chaperone SlyD and inhibits the cell wall precursor forming enzyme MraY. Bacterial cell wall biosynthesis is an important target for antibiotics; therefore, knowledge of molecular details in the ΦX174-E lysis pathway could help to identify new mechanisms and sites of action. In this study, cell-free expression and nanoparticle technology were combined to avoid toxic effects upon ΦX174-E synthesis, resulting in the efficient production of a functional full-length toxin and engineered derivatives. Pre-assembled nanodiscs were used to study ΦX174-E function in defined lipid environments and to analyze its membrane insertion mechanisms. The conformation of the soluble domain of ΦX174-E was identified as a central trigger for membrane insertion, as well as for the oligomeric assembly of the toxin. Stable complex formation of the soluble domain with SlyD is essential to keep nascent ΦX174-E in a conformation competent for membrane insertion. Once inserted into the membrane, ΦX174-E assembles into high-order complexes via its transmembrane domain and oligomerization depends on the presence of an essential proline residue at position 21. The data presented here support a model where an initial contact of the nascent ΦX174-E transmembrane domain with the peptidyl-prolyl isomerase domain of SlyD is essential to allow a subsequent stable interaction of SlyD with the ΦX174-E soluble domain for the generation of a membrane insertion competent toxin.

Ozone efficacy for the control of airborne viruses: Bacteriophage and norovirus models.

This study was designed to test the efficacy of an air treatment using ozone and relative humidity (RH) for the inactivation of airborne viruses. Four phages (φX174, PR772, MS2 and φ6) and one eukaryotic virus (murine norovirus MNV-1) were exposed to low ozone concentrations (1.23 ppm for phages and 0.23 ppm for MNV-1) and various levels of RH for 10 to 70 minutes. The inactivation of these viruses was then assessed to determine which of the tested conditions provided the greatest reduction in virus infectivity. An inactivation of at least two orders of magnitude for φX174, MS2 and MNV-1 was achieved with an ozone exposure of 40 minutes at 85% RH. For PR772 and φ6, exposure to the reference condition at 20% RH for 10 minutes yielded the same results. These findings suggest that ozone used at a low concentration is a powerful disinfectant for airborne viruses when combined with a high RH. Air treatment could therefore be implemented inside hospital rooms ventilated naturally.

A Multifaceted Evaluation on the Penetration Resistance of Protective Clothing Fabrics against Viral Liquid Drops without Pressure.

Healthcare workers should wear appropriate personal protective clothing (PPC) on assuming the risk of exposure to various pathogens. Therefore, it is important to understand PPC performance against pathogen penetration. Currently, standard methods to evaluate and classify the penetration resistance of PPC fabrics with pressure using synthetic blood or phi-X174 phage have been established by the International Organization for Standardization (ISO). However, the penetration of viral liquid drops (VLDrop) on the PPC without pressure is also a major exposure route and more realistic, necessitating further studies. Here, we evaluated the penetration resistance against VLDrop without pressure using phi-X174 phage on woven and nonwoven fabrics of commercially available PPC classified by the ISO, and analyzed in detail the penetration behaviors of VLDrop by quantifying the phage amounts in leak-through and migration into test fabrics. Our results showed that some nonwoven test fabrics had nearly the same penetration resistance against VLDrop, even if the ISO resistance class differed. Furthermore, the results revealed that the amount of leakage through the fabrics was correlated with the migration amount into the fabric, which was related to fluid-repellency of fabrics, suggesting the effectiveness for penetration resistance. Our study may facilitate more appropriate selection for PPC against pathogen penetration.

Bacteriophage PhiX174's ecological niche and the flexibility of its Escherichia coli lipopolysaccharide receptor.

To determine bacteriophage PhiX174's ecological niche, 783 Escherichia coli isolates were screened for susceptibility. Sensitive strains are diverse regarding their phylogenies and core lipopolysaccharides (LPS), but all have rough phenotypes. Further analysis of E. coli K-12 LPS mutants revealed that PhiX174 can use a wide diversity of LPS structures to initiate its infectious process.

Rapid and reproducible infectivity end-point titration of virulent phage in a microplate system.

The standard method for measuring the number of infectious phages in solution has traditionally been the plaque forming assay. An alternative method is described where the number of lytic, infectious phages is determined in an endpoint titration assay adapted for a microplate system. In this model system, susceptible Escherichia coli B6 at a density of 4 x 10(7) cells/ml, were mixed with an equal volume (100 microl) of PhiX174 diluted serially in a microtest plate. After 3h of incubation on a microplate shaker the endpoint was determined spectrophotometrically and calculated according to the method of Reed and Muench. A well was considered positive for infection if the OD630-value was < or = 10% compared to the OD630-value of the negative control of uninfected cells. ID50-titers were 2.5x higher than the PFU-titers (CV 15%) and the intra assay reproducibility revealed a CV of 9%. The method has several advantages as compared with the conventional PFU-titration. It is less time and material consuming with the possibility to assess several samples at the same time.

[Permeability to phi chi 174 bacteriophages in polyolephin membrane condoms]. / Determinación de la permeabilidad viral de los condones de membrana de poliolefina al bacteriófago phi chi 174.

Membranes used for the manufacture of condoms eventually can develop tiny pores, thereby decreasing dramatically their effectiveness as a physical barrier against the transmission of infectious agents. A technique was designed that was based on the ability of bacteriophage viruses to trespass membranes and to infect certain bacteria species, and then developing lysis plaques in the colonies of the host bacteria. The effectiveness of 60 polyolefin condoms in preventing the diffusion of the bacteriophage phi chi 174(ATCC13706-B1), 27 nm diameter, was compared to 20 latex condoms. Physiological conditions such as pressure, pH, superficial tension, length, time of exposure and viral titre were simulated. A pressurization system was designed, in which compressed air was injected simultaneously to ten condoms. Four of the 60 polyolefin condoms and one of the 20 latex condoms were permeable to the virus. Therefore, at least 93% of the condoms evaluated were able to contain the virus. The difference in permeability between the two types of membranes was not statistically significant (P = 0.79).

Generating a synthetic genome by whole genome assembly: phiX174 bacteriophage from synthetic oligonucleotides.

We have improved upon the methodology and dramatically shortened the time required for accurate assembly of 5- to 6-kb segments of DNA from synthetic oligonucleotides. As a test of this methodology, we have established conditions for the rapid (14-day) assembly of the complete infectious genome of bacteriophage X174 (5386 bp) from a single pool of chemically synthesized oligonucleotides. The procedure involves three key steps: (i). gel purification of pooled oligonucleotides to reduce contamination with molecules of incorrect chain length, (ii). ligation of the oligonucleotides under stringent annealing conditions (55 degrees C) to select against annealing of molecules with incorrect sequences, and (iii). assembly of ligation products into full-length genomes by polymerase cycling assembly, a nonexponential reaction in which each terminal oligonucleotide can be extended only once to produce a full-length molecule. We observed a discrete band of full-length assemblies upon gel analysis of the polymerase cycling assembly product, without any PCR amplification. PCR amplification was then used to obtain larger amounts of pure full-length genomes for circularization and infectivity measurements. The synthetic DNA had a lower infectivity than natural DNA, indicating approximately one lethal error per 500 bp. However, fully infectious X174 virions were recovered after electroporation into Escherichia coli. Sequence analysis of several infectious isolates verified the accuracy of these synthetic genomes. One such isolate had exactly the intended sequence. We propose to assemble larger genomes by joining separately assembled 5- to 6-kb segments; approximately 60 such segments would be required for a minimal cellular genome.

DNA methylation inhibits the transfecting activity of replicative- form phi X174 DNA.

Replacement of virtually all the cytosine residues with 5-methylcytosine residues in the complementary strand of the replicative form (RF) of phi X174 DNA caused a 300- to 500-fold loss in its transfecting activity. Similar results were obtained with analogously methylated M13 RF. Transfection experiments with phi X RF hemimethylated in only part of the molecule, as assessed by analysis with restriction endonucleases, indicated that gene A of phi X, which needs to be nicked at a specific site by the gene A protein for RF replication, was not the main target for this inhibition by DNA methylation. We propose that the loss of transfecting activity was due to hemimethylation of the phi X RF interfering with the processively catalyzed movement of the replication fork.