In-vitro and in-vivo comparative studies of treatment effects on enamel demineralization during orthodontic therapy: implications for clinical early-intervention strategy.

OBJECTIVES: This study aimed to investigate if CPP-ACP / infiltrating resin was superior in treating enamel demineralization during orthodontic therapy compared with fluoride varnish, in order to provide early-intervention implications for dental professionals. MATERIALS AND METHODS: In the in-vitro study, premolars were grouped into four: remineralization with fluoride varnish / CPP-ACP, sealing with infiltrating resin, and negative control. Experimental demineralization of enamel surfaces was analyzed using techniques of QLF, SEM, EDS and micro-hardness testing. An in-vivo intervention study was conducted on patients randomly assigned into three groups. At the baseline and every-3-month follow-up, QLF parameters were compared temporally and parallelly to yield potential implications for promotion in clinical practice. RESULTS: The in-vitro study performed on 48 experimental tooth surfaces demonstrated that sealing with infiltrating resin reduced enamel surface porosity and increased surface micro-hardness significantly. In the in-vivo intervention study on 163 tooth surfaces, it was suggested that for those who meet the criteria of -10 < ΔF < -6 and - 1000 < ΔQ < -20 at the baseline, all these treatment methods could achieve acceptable outcomes; with the rising of absolute values of ΔF and ΔQ, sealing with infiltrating resin showed more evident advantages. CONCLUSION: For enamel demineralization during orthodontic therapy, all the treatment methods involved in this study showed acceptable effectiveness but had respective characteristics in treatment effects. QLF parameters could be used as indicators for clinical early-intervention strategy with regards to this clinical issue. CLINICAL RELEVANCE: With QLF parameters, clinical early-intervention strategy for enamel demineralization during orthodontic therapy could be optimized.

A severely damaged premolar tooth restored with coronal pulpotomy and a 3D-printed endocrown.

Advances in computer-aided design/computer-aided manufacturing (CAD-CAM) technologies and adhesives have enabled the use of endocrowns as an effective and conservative treatment option for restoring endodontically treated teeth in pediatric populations. Thus, this case report presents the treatment of a severely damaged premolar tooth with coronal pulpotomy and a 3D-printed endocrown restoration. A 13-year-old patient with pain due to profound caries in the left maxillary second premolar tooth was referred to the Department of Pediatric Dentistry at Gazi University in Ankara, Türkiye. Deep dentinal caries and severe tissue loss were revealed in the clinical examination. No periradicular lesions were detected in a radiographic examination, and there was no inflammation in the pulp. The selected intervention was a two-step process involving a coronal pulpotomy followed by a custom 3D-printed endocrown restoration. No clinical complications or radiographic pathologies were observed over a two-year follow-up period, and the patient was satisfied with the final esthetics and function of the restoration. 3D-printing technology can be successfully integrated into pediatric restorative dentistry and offers a conservative, efficient, and esthetically pleasing treatment option for children with severely damaged dentition.

Effectiveness of EndoActivator, PATS Vario system, and XP-endo Finisher files on smear layer removal under scanning electron microscope: A comparative study.

CONTEXT: The smear layer may harbor many bacteria; hence, alternative methods are used to disrupt and remove biofilm. AIM: The aim of the study was to compare the effectiveness of EndoActivator, PATS Vario System, and XP-endo Finisher files on smear layer removal using a scanning electron microscope. SUBJECTS AND METHODS: Sixty single-rooted extracted premolars with Vertucci Type 1 configuration were decoronated and divided into four groups. The groups were instrumented with the rotary ProTaper file system. All specimens were flushed with 1 ml of 3% sodium hypochlorite. Group 1 was irrigated with a conventional needle and syringe. In Group 2, the irrigant was activated with an EndoActivator. In Group 3, the irrigant was activated with PATS Vario system, and in Group 4, XP-endo Finisher files were used after biomechanical preparation to remove debris and smear layer. All specimens were finally rinsed with 3 ml of 3% sodium hypochlorite. The teeth underwent longitudinal splitting and grooving in the coronal, middle, and apical thirds, and then, the samples were taken for scanning electron microscopy to evaluate the amount of smear layer removal in each third. RESULTS: The middle and coronal thirds Showed that almost similar efficacy to remove smear layer in both Group II and Group III. At the apical third, Group III showed comparatively better results than Group I, II, and IV, respectively. CONCLUSION: Equal amount of smear layer was seen with EndoActivator and PATS Vario system when used as sonic irrigation devices.

The effect of two preparation designs on the fracture resistance and marginal adaptation of two types of ceramic crowns using CAD/CAM technology (In vitro study).

BACKGROUND: Recently, prosthodontic approaches involve more conservative procedures that include less invasive finish line preparations that use less ceramic thickness. AIM OF THE STUDY: This in vitro study aimed to evaluate the effect of vertical preparation and modified vertical preparation designs on the marginal adaptation and fracture resistance of two types of ceramic crowns using CAD/CAM technology. MATERIALS AND METHODS: Two typodont maxillary first premolars were embedded in acrylic resin. Forty positive replicas of epoxy resin dies were used that were divided into two groups depending on the preparation design (n = 20); Group V (Vertical): dies with feather edge finish line and Group MV (Modified vertical): dies with feather edge finish line, where a reverse shoulder of 1 mm depth was placed on the buccal surface 1.5 mm from the occlusal surface. Each group was further subdivided into two subgroups according to the type of ceramic material (n = 10): Subgroup Va and subgroup MVa for lithium disilicate (e.max CAD) and subgroup Vb and subgroup MVb for zirconia (zolid ht+). Crown restorations were made with CAD-CAM technology. The marginal adaptation was assessed using a stereomicroscope both prior to cementation and after cementation and aging. Fracture resistance was tested with a universal testing machine, and the data were statistically analyzed. RESULTS: Marginal adaptation showed no significant differences between subgroups before or after cementation and aging. Three-way ANOVA indicated that preparation design (p = 0.516) and material (p = 0.269) had no significant effect, but cementation had a significant effect (p < 0.0001) on the marginal adaptation. According to two-way ANOVA test, Subgroup (MVb) showed the highest result followed by subgroup (Vb) and subgroub (MVa) and the least was subgroub (Va). Fracture modes showed no significant differences among the subgroups (p = 0.982). CONCLUSIONS: Marginal adaptation of lithium disilicate and zirconia crowns remained clinically acceptable regardless of preparation design. While the modified vertical preparation with a reverse shoulder notably enhanced the fracture resistance of both materials, with zirconia demonstrating superior fracture resistance compared to lithium disilicate with average values exceeding premolar biting force.

Comparing the remineralization potential of undemineralized dentin powder versus chicken eggshell powder on artificially induced initial enamel carious lesions: an in-vitro investigation.

BACKGROUND: White spot lesions are a widespread undesirable effect, especially prevalent during fixed orthodontic treatments. The study compared the in vitro enamel remineralization potential of undemineralized dentin matrix (UDD) versus chicken eggshell powder (CESP) for artificially induced enamel lesions. METHODS: 100 caries-free and sound maxillary premolars were randomly divided into four groups each contain 25 teeth: Group I (Baseline): No treatment was done to the enamel surface. Group II (Negative control ): The enamel surface of the teeth underwent demineralization using demineralizing solution to create artificial carious lesions then kept in artificial saliva. Group III (CESP treated): After demineralizing the tooth surface, the teeth have been suspended in the CESP remineralizing solution. Group IV (UDD treated): After enamel demineralization, the teeth were suspended in UDD remineralizing solution. The remineralization potential was assessed by Vickers microhardness testing, scanning electron microscopic examination (SEM), and energy dispersive X-ray (EDX). RESULTS: The current study demonstrated an increase in the mean microhardness of CESP and UDD-treated groups; however, It was nearer to the baseline level in the UDD group. SEM imaging revealed greater enamel remineralization in the UDD group compared to the remaining groups. The UDD group disclosed complete coverage for the prismatic enamel compared to the CESP group, which revealed a partially remineralized enamel surface. Interestingly, the Ca/P ratio increased significantly in the CESP group compared to the negative control group. In contrast, a higher significant increase in the mean Ca/P ratios was recorded in the UDD group compared to the test groups. CONCLUSION: biomimetic UDD and CESP powder should be utilized to treat enamel early carious lesions. However, UDD demonstrated the most significant remineralization potential.

Comparison of alveolar bone morphology after expansion with hybrid and conventional Hyrax expanders.

OBJECTIVES: To compare the buccal and palatal bone changes of maxillary posterior teeth produced by hybrid hyrax (HH) and conventional hyrax (CH) expanders in growing patients. MATERIAL AND METHODS: A sample of 32 patients with posterior crossbites in the late mixed dentition was recruited and randomly allocated into two groups. Group HH was composed of 18 individuals with a mean age of 10.7 years (six female, 12 male) treated with a hybrid expander with two anterior parasagittal miniscrews. Group CH was composed of 14 individuals with a mean age of 11.4 years (six female, eight male) treated with a conventional Hyrax expander. Cone-beam computed tomography (CBCT) exams were obtained before expansion (T1) and after 11 months when the expander was removed (T2). Buccal and palatal bone plate thickness and height of maxillary posterior teeth were measured. Intergroup comparisons were performed using t or Mann-Whitney tests (P < .05). RESULTS: The CH group showed greater decreases of the buccal bone plate height (mean change: 1.27 mm) at the maxillary first premolars compared to the HH group (mean change: 0.11 mm, P = .001). No intergroup difference was found for changes in the buccal and palatal bone thickness. CONCLUSIONS: Hybrid expanders showed a tendency to cause less negative impact on the buccal bone plate height of first premolars compared to conventional Hyrax expanders. However, the difference was not clinically significant. Both hybrid and conventional Hyrax expanders are safe for the alveolar bone morphology in the late mixed dentition.

Evaluating the efficiency of mandibular molar protraction using Herbst appliances versus temporary anchorage devices: a retrospective case-controlled study.

BACKGROUND: Mandibular second premolar agenesis is a common problem in orthodontics and is often treated in conjunction with maxillary counterbalancing extractions. However, in cases without maxillary crowding or dental protrusion, space closure may pose challenges leading to compromised occlusal results or patient profile. Multiple techniques have been described to treat these patients; nevertheless, there is a paucity of data comparing effectiveness of space closure utilizing various anchorage techniques. The goal of this study is to assess the effectiveness of the Herbst device during mandibular molar protraction and compare it to the use of temporary anchorage device (TADs) in patients with mandibular second premolar agenesis. MATERIALS AND METHODS: This retrospective study included 33 patients with mandibular premolar agenesis treated without maxillary extractions. Of these patients, 21 were treated with protraction Herbst devices and 12 with TADs. Changes in molar and incisor positions, skeletal base positions and occlusal plane angulations were assessed on pretreatment (T0) and post-treatment (T1) lateral cephalograms. Scans/photographs at T0 and T1 were used to evaluate canine relationship changes representing anchorage control. Space closure and breakage/failure rates were also compared. Data was analyzed with paired and unpaired t-tests at the significance level of 0.05. RESULTS: Within the Herbst group, changes in mandibular central incisor uprighting and mandibular molar crown angulations were statistically significant. However, no significant differences were noted between the Herbst and TAD groups. Protraction rates as well as overall treatment times were comparable (0.77 mm/month vs. 0.55 mm/month and 3.02 years vs. 2.67 years, respectively). Canine relationships were maintained or improved toward a class I in 82.85% of the Herbst sample, compared to in 66.7% of the TAD sample. Emergency visits occurred in 80.1% of the Herbst group, with cementation failures or appliance breakages as the most common reasons. CONCLUSION: The Herbst device could be a viable modality in cases with missing mandibular premolars where maximum anterior anchorage is desired, or if patients/parents are resistant to TADs. Furthermore, they could be beneficial in skeletal class II patients with mandibular deficiency who also need molar protraction. However, the increased incidence of emergency visits must be considered when treatment is planned.

Morphological study of remineralization of the eroded enamel lesions by tyrosine-rich amelogenin peptide.

BACKGROUND: Tyrosine-rich amelogenin peptide (TRAP) is the main amelogenin digestion product in the developmental enamel matrix. It has been shown to promote remineralization of demineralized enamel in our previous study. However, direct evidence of the effect of TRAP on the morphology and nanostructure of crystal growth on an enamel surface has not been reported. This study aimed to examine the effect of TRAP on the morphology of calcium phosphate crystals grown on early enamel erosion using a pH-cycling model. METHODS: Eroded lesions were produced in human premolars by 30-second immersion in 37% phosphoric acid. Forty-five samples of eroded human premolar enamel blocks were selected and randomly divided into 3 groups: deionized water (DDW, negative control); 100 µg/mL TRAP, and 2 ppm sodium fluoride (NaF, positive control group). For 14 days, the specimens were exposed to a pH-cycling model. Using scanning electron microscopy (SEM) and atomic force microscopy (AFM) methods, the surface morphology, calcium-phosphorus ratio, and enamel surface roughness were examined. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) were used to assess crystal characteristics. RESULTS: After pH-cycling, compared to the two control groups, the surface of the eroded enamel of the peptide TRAP group shows a large number of new, densely arranged rod-like crystals, parallel to each other, regularly arranged, forming an ordered structure, with crystal morphology similar to that of natural enamel. The crystals are mostly hydroxyapatite (HA). CONCLUSION: This study demonstrates that the peptide TRAP modulates the formation of hydroxyapatite in eroded enamel and that the newly formed crystals resemble natural enamel crystals and promote the remineralization of enamel, providing a promising biomaterial for remineralization treatment of enamel lesions.

Fracture resistance and fractographic analysis of pressable glass-ceramics with different partial coverage designs for maxillary premolars.

BACKGROUND: Partial coverage concepts have met the main goal of conservative dentistry. Vonlays, which combine features of veneers and onlays, are a recent alternative to full coverage designs and overlay partial coverage restorations. This in vitro study was conducted to compare the fracture resistance of the newly introduced pressable zirconia-reinforced lithium silicate with pressable lithium disilicate ceramic and to determine the optimal preparation design for partial coverage on upper premolars. METHODS: Fifty-two duplicated epoxy resin dies were prepared following vonlay and overlay preparation guidelines. For each preparation (n = 26), the specimens were divided into two subgroups to be restored with lithium disilicate (IPS e.max Press) or zirconia-reinforced lithium silicate (Vita Ambria) (n = 13 each). Ceramic vonlays and overlays were bonded using dual cure resin cement, subjected to thermomechanical fatigue, and the load to fracture was tested by using a universal testing machine. The specimens were fractographically analyzed via scanning electron microscopy (SEM). The normality of the fracture resistance data was checked using the Shapiro‒Wilk test and Q‒Q plots, and two-way ANOVA was used to assess the effect of the type of preparation and ceramic material on the fracture resistance. RESULTS: The group of overlays restored with zirconia-reinforced lithium silicate showed the highest mean fracture load (1218.69 N), while the group of vonlays restored with lithium disilicate had the lowest mean fracture resistance (967.15 N). The effect of preparation design and material type on fracture resistance was significant for both factors, p = 0.003 and p < 0.0001, respectively. Different features of the fracture surfaces, such as arrest lines, hackles, and directions of crack propagation, were observed. CONCLUSIONS: Zirconia-reinforced lithium silicate exhibited greater resistance to fracture compared to lithium disilicate, making it a potential substitute for partial coverage restorations. Additionally, the overlay showed superior fracture resistance when compared to the vonlay preparation design.

Metal artifact reduction tool and mA levels impact on the diagnosis of fracture extension in endodontically treated teeth using cone-beam CT.

AIM: To evaluate the influence of different levels of metal artifact reduction (MAR) tool and milliamperage (mA) on the diagnosis of fracture extension in endodontically treated teeth using cone beam CT (CBCT). MATERIALS AND METHODS: Ten maxillary premolars were endodontically treated and positioned in the empty sockets of a human maxilla covered with wax. CBCT acquisitions were performed using the Eagle Edge device (Dabi Atlante, Brazil) adjusted to 120 kVp, FOV of 4 × 6 cm, exposure time of 24 s and voxel size of 0.2 mm in 8 different conditions with different MAR (1, 2 and 3) and mA (3.2 and 6.3) levels. Crown-root fractures were simulated in the universal testing machine, and CBCT images were acquired again. Five radiologists evaluated the presence and extension of fractures with a 5-point scale. Statistical analysis was performed by analysis of variance, Tukey and Kappa test (α = 0.05). RESULTS: Although different mA levels did not significantly (p > 0.05) affect the diagnosis values for fracture presence and extension, when evaluated the different levels of MAR, AUC and sensitivity showed significantly higher values (p < 0.05) for MAR 0 using 6.3 mA and kappa agreement showed significantly higher values (p < 0.05) for MAR 0 and 2 using 6.3 mA. CONCLUSIONS: Although mA levels do not have a diagnostic effect when isolating the MAR level; in 6.3 mA, MAR 0 and 2 can positively influence the diagnosis of fracture extension in endodontically treated teeth using CBCT. CLINICAL RELEVANCE: The isolate evaluation of dental fracture presence can overlook diagnostics error of its extension.

Impact of different activation procedures on sodium hypochlorite penetration into dentinal tubules after endodontic retreatment via confocal laser scanning microscopy.

BACKGROUND: Infected dentinal tubules are a possible source of bacteria that are responsible for the failure of root canal treatment. Therefore, disinfection of dentinal tubules by increasing the penetration of the irrigation solution is important for success in retreatment cases. This study utilized confocal laser scanning microscopy (CLSM) to assess and compare the impact of XPR, ultrasonic irrigation (UI) and sonic activation (SA) on NaOCl penetration into dentinal tubules following endodontic retreatment. METHODS: A total of forty mandibular premolars were enrolled in this investigation. Following root canal preparation up to ProTaper X3 file (30/0.07), root canals were obturated with gutta-percha and bioceramic root canal sealer with single cone technique. The root canal filling materials were removed using ProTaper nickel-titanium rotary retreatment files until the working length was reached. The retreatment procedure was finalized using the ProTaper Next X4 (40/0.06). The teeth were divided into four groups based on the irrigation activation technique: control (conventional needle irrigation), SA, UI and XPR. During the final irrigation procedure, Rhodamine B dye was introduced to 5% NaOCl for visualization via CLSM. Subsequent to image acquisition, the maximum penetration, penetration percentage, and penetration area were calculated. Data were statistically analyzed using the Kruskal-Wallis, Friedman, and Bonferroni Dunn multiple comparison tests through R software (p < 0.05). RESULTS: In the middle third, UI yielded a significantly higher penetration percentage than the control group (p < 0.05). The UI and XPR groups showed increased penetration percentages in the coronal and middle thirds compared with the apical third (P < 0.05). Maximum penetration was notably reduced in the apical third than in comparison with the coronal and middle thirds in all groups (p < 0.05). In the control, SA and XP groups, the penetration area was ranked in descending order as coronal, middle and apical (p < 0.05). Conversely, in the ultrasonic group, the penetration area was significantly lower in the apical third than in the middle and coronal thirds (p < 0.05). CONCLUSIONS: UI enhanced the penetration percentage in the middle third of the root compared with that in the control group. XPR and SA showed no significant effect on NaOCl penetration following retreatment.

Comparative Analysis of Calcium and Hydroxyl Ion Release from Pulp Dressing Materials in Pulpotomized Premolars.

BACKGROUND The aim of this study was to evaluate the time-dependent release of calcium (Ca⁺⁺) and hydroxyl (OH⁻) ions from 3 different pulp dressing materials used to cap root canal orifices in pulpotomized premolars. MATERIAL AND METHODS Freshly extracted (n=40) premolars were subjected to standardized pulpotomy procedure and finally restored in 5 groups using resin-modified glass ionmmer liner (RMGI) and bonded resin composite directly against the pulp chamber's floor (Control, G2) and over 3 different orifices' capping materials - Dycal (G3), Endo Sequence root repair material (ESRRM, G4), and mineral trioxide aggregate (MTA) Angelus (G5). Another 10 sound premolars served as the Reference group (G1). The restored teeth were incubated at 37±1°C in sealed containers filled with deionized water to assess Ca⁺⁺ and OH⁻ ions release after 24 h and at 1, 4, and 8 weeks. Two-way ANOVA and Tukey's comparisons at alpha=0.05 were used to statistically analyze the collected data. RESULTS Two-way ANOVA revealed significant differences in Ca⁺⁺ ions between test groups at different testing time intervals (P<0.05). Despite the constant (Tukey's, P<0.05) pH levels (OH⁻ release), Group 5 specimens exhibited higher Ca⁺⁺ ion release in comparison to Groups 4 and 3 at different testing timepoints (Tukey's, P<0.05). CONCLUSIONS Although all the assessed pulp dressing materials had equivalent and stable pH levels, ESRRM and MTA-Angelus had the highest Ca⁺⁺ ion release at the assessment intervals.

Accuracy of Working Length Measurement Using Cone Beam Computed Tomography at Three Field of View Settings, Conventional Radiography, and Electronic Apex Locator: An Ex-vivo Study.

OBJECTIVES: Determining the working length (WL) in root canal treatment facilitates the treatment prognosis. The introduction of apex locators and new CBCT devices in dentistry influenced this consideration. This comparative study evaluated the accuracy of working length measurement by cone-beam computed tomography (CBCT) in three fields of view (FOVs), conventional radiography, and the apex locator Raypex 5. METHODOLOGY: The descriptive-analytical study was performed on 40 lower premolar teeth that met the inclusion criteria. Direct observation under the microscope was considered the gold standard and compared with measurements by the electronic apex locator, CBCT, and periapical images. RESULTS: The results were analyzed by paired t-tests and Wilcoxon tests. A significance level of 0.05 was considered in this study. CBCT 5×5 FOV with a p-value of 0.733 and analog radiography with a p-value of 0.001 achieved the working lengths with the highest and lowest accuracy, respectively. In addition, the difference between actual and measured working length using analog radiography was significant (p-value <0.05). CONCLUSIONS: According to the results of this study, CBCT images at different FOVs and those taken by the apex locator Raypex 5 can be used as a reliable method for estimating the working length. (EEJ-2023-10-141).

Position and frequency of lateral canals in carnassial teeth of dogs.

Carnassial teeth, as one of the most important teeth in dogs, are commonly affected by different types of injuries and pathological disorders, which require endodontic treatment. Lateral canals, which leave the main root canal, and apical deltas are present in the root canal system of dogs. These canals represent small branches that leave the main root canal at a sharp angle and terminate in a region of the periodontal ligament on the external root surface. In this study, 200 teeth were included, of which 100 were superior fourth premolars and 100 were inferior first molars. Lateral canals were present in a total of 30 roots of superior fourth premolar teeth, whereas in inferior first molars, these canals were found in 3% of roots. In superior fourth premolars, lateral canals were mostly present in the apical third, 86%, while 14% were present in the middle third of the root. In inferior first molars, lateral canals were found in 3% of the roots, 2% in the apical third and 1% in the middle third of the roots. The knowledge of the complex root canal morphology is essential for any endodontic treatment. Due to the presence and frequency of lateral canals, it is imperative to perform more thorough cleaning and instrumentation while performing endodontic treatment on superior fourth premolars compared to inferior first molars.

Evaluating the Effects of Cigarette Smoking and Heated Tobacco Products on Hard Dental Tissues: A Comparative Histological and Colorimetric Analysis.

OBJECTIVES: This study aimed to evaluate and compare the impact of cigarette smoking (CS) and heated tobacco (HT) on the alteration of color and ultrastructural characteristics of human enamel and cementum. BACKGROUND: According to tobacco companies, a less harmful substitute for CS is HT products. Nevertheless, comprehensive research on the effects of HT on tooth structures has been lacking. This study aimed to evaluate and compare the impact of CS and HT on the alteration of color and ultrastructural characteristics of human enamel and cementum. MATERIALS AND METHODS: Thirty intact and noncarious human maxillary premolars extracted for orthodontic treatment purposes, previously disinfected, were used in the study. The specimens were randomly separated into six groups (n = 10), as follows: Group 1: enamel without smoking exposure; Group 2: enamel exposed to CS; Group 3: enamel exposed to HT; Group 4: cementum without smoking exposure; Group 5: cementum exposed to CS; and Group 6: cementum exposed to HT. The measurement of color change was conducted using a spectrophotometer. The surface alterations and mineral composition of enamel and cementum were evaluated using scanning electron microscopy and energy-dispersive X-ray spectroscopy. ANOVA test followed by Tukey's post hoc test was used to determine significant differences between groups. RESULTS: Results showed that CS had a more pronounced effect on enamel and cementum color changes than HT. The impact of CS and HT on color changes was more evident in cementum than in enamel. Surface morphology of enamel and cementum showed alterations in histology following exposure to both smoking types. Moreover, the mineral content experienced a significant reduction after using CS and HT. The reduction in calcium content after CS and HT exposure was similar. However, HT led to a significant decrease in the phosphorus content of enamel when compared with CS. At the same time, CS exposure in cementum resulted in a more significant reduction in Ca/P ratio than HT. CONCLUSIONS: Although HT may appear to present a lower danger to hard dental tissues than CS, it is not entirely harmless. CS results in more color changes on the enamel and cementum of teeth. Both smoking methods affected the mineral content of teeth, with CS having a significant effect on the roots, while HT significantly affected the crowns' mineral composition.

Anatomical characteristics of different tooth groups. Effect on in-office bleaching treatment

AIM: The objective of the present study was to investigate the association between the anatomical characteristics of different tooth groups and the diffusion and bleaching effect of hydrogen peroxide (H2O2). MATERIALS AND METHODS: Computed tomography (CT) images from five patients were used to assess the hard tissue thickness and pulp volume (PV) of four tooth groups: lower (mandibular) incisors (LI), upper (maxillary) incisors (UI), canines (C), and premolars (PM). Additionally, 80 bovine tooth disks were divided into four groups (n = 20) to match the thickness of each tooth group studied. All the specimens were exposed to a 35% H2O2 bleaching gel, with 50 µL applied for 45 min during the first, second, and third sessions. Diffusion was evaluated using the peroxidase enzyme method. Color change analyses (∆E, ∆E00, and ∆WID) were performed after the three application sessions and 7 days after the bleaching treatment using a spectrophotometer. RESULTS: The PM group showed greater thickness and PV, followed by the C, UI, and LI groups (P 0.001). The LI group had six times greater H2O2 diffusion compared with the PM group (P 0.001), while the PM group exhibited a PV nine times larger than the LI group. Furthermore, the LI and UI groups achieved color saturation with one fewer session than the C and PM groups. CONCLUSIONS: Specific tooth groups have anatomical characteristics that interfere with bleaching treatment in terms of the diffusion and whitening effect of H2O2. Furthermore, the diffusion capacity of H2O2 was inversely proportional to the thickness of the tooth groups.

Comparative evaluation of the accuracy of electronic apex locators and cone-beam computed tomography in detection of root canal perforation and working length during endodontic retreatment.

BACKGROUND: To evaluate the accuracy of the electronic apex locators (EALs), and Cone-Beam Computed Tomography (CBCT) scanning, both in working length (WL) determination and in the detection of root canal perforations in retreatment cases. METHODS: Sixty human mandibular premolars were selected. After crown removal partially and canal access, root canals were instrumented and irrigated. The obturation process utilized gutta-percha and sealer with warm vertical compaction. Two groups were distinguished: one without perforation (Group 1) and the other with an apical third perforation (Group 2). Retreatment included filling removal, apical preparation, and irrigation. Actual working lengths (AWL) were determined using a stereomicroscope. CBCT images were used to measure CBCT working length (CWL), with adjustments for optimal views. Propex II and Dentaport ZX were used to measure electronic working length (EWL). Differences between EWL and AWL, as well as CWL, were analyzed to gauge accuracy. Data underwent Two-way ANOVA analysis. Measurements within ± 0.5 and ± 1 mm tolerance ranges were deemed successful for each device, followed by applying the Pearson Chi-square test. RESULTS: The study reveals no significant inter-group variations in device performance (p > .05). Dentaport ZX missed detecting perforation in two Group 2 (apical perforation) cases. For ± 1 mm tolerance, Propex II displayed the highest success in Group 2 (apical perforation). CONCLUSION: This study demonstrates the comparable performance of Propex II, Dentaport ZX, and CBCT in endodontic retreatment, providing insights into diagnostic reliability.

[Impact of GuttaFlow Bioseal sealer on the vertical fracture resistance of oval-shaped canals].

PURPOSE: To investigate the effect of GuttaFlow Bioseal root canal sealer on the vertical root fracture resistance of oval-shaped root canals. METHODS: Sixty orthodontically subtracted maxillary and mandibular single-rooted premolar teeth were scanned with CBCT. Oval canals were eligible when the buccolingual diameter of the canal was greater than or equal to two times the mesiodistal diameter at a distance of 5 mm from the root apex. Thirty single-rooted premolars with oval-shaped root canals were prepared to F2 using the Protaper system and then randomly divided into the GuttaFlow Bioseal filling group and iRoot SP filling group. Each group was further divided for root canal filling using warm vertical compression, cold lateral condensation and single cone techniques. Five single-rooted premolars was chosen as a negative control group. After 30 days of storage in a constant thermotank at 37 ℃ and 100% humidity, the filled roots were vertically placed into a cylindrical model of self-polymerizing acrylic resin. Subsequently, the samples were fixed on the lower plate of a universal testing machine, and a ball of 4 mm in diameter was applied vertically with a downward pressure at a speed of 1 mm/min until fracture occurred. The load values were recorded in Newtons. The data were analyzed using SPSS 29.0 software package. Fracture patterns were examined under microscope. RESULTS: T test results showed no significant difference between the GuttaFlow Bioseal-filled and iRoot SP-filled groups (P=0.321). One-way ANOVA showed a significant difference in vertical fracture resistance between the groups(P＜0.05), and LSD analysis showed that the GuttaFlow Bioseal-filled sample teeth were significantly more resistant to vertical fracture than the iRoot SP when using the thermal vertical compression filling method and the single-tip method(P＜0.05). In contrast, the GuttaFlow BIoseal-filled group was significantly less resistant to vertical fracture than the iRoot SP group when using the cold lateral compression filling method(P＜0.05). CONCLUISIONS: GuttaFlow Bioseal has the potential to improve root resistance to vertical fracture when filling root canals using the thermal vertical pressurization method and the single-tip method, but more clinical trials are needed to validate this result and its long-term prognosis.

[Transverse characteristics of normodivergent patients in different sagittal skeletal patterns].

PURPOSE: This study aimed to measure and analyze the transverse indicators of normodivergent patients with different sagittal skeletal malocclusions, to explore the transverse characteristics of different sagittal skeletal malocclusions. METHODS: Lateral cephalograms and CBCT of 90 normodivergent patients with skeletal Class Ⅰ, Ⅱ and Ⅲ in their permanent dentition were collected. Dolphin software was applied to measure the widths of the basal bone, alveolar bone, dental arch and buccolingual inclination angle of the corresponding teeth in the maxillary and mandibular canine, premolar and molar areas. SPSS 22.0 software package was applied for statistical analysis of the data. RESULTS: The widths of the mandibular basal bone in canine, premolar and molar areas of skeletal Class Ⅲ were (27.15±2.74), (39.30±2.82) and (59.97±2.93) mm, respectively. The widths of the mandibular alveolar bone of skeletal Class Ⅲ were (25.38±1.78), (34.51±2.28) and (47.72±2.73) mm, respectively. The dental arch widths of the maxillary premolar and mandibular canine areas of skeletal Class Ⅲ were (48.70±2.35) and (30.69±2.31)mm, respectively. The above data of skeletal Class Ⅲ were significantly larger than those of skeletal Class Ⅰ and Ⅱ(P＜0.01). The dental arch widths of the maxillary canine, maxillary molar and mandibular molar areas of skeletal Class Ⅲ were (38.88±1.90), (59.51±3.40) and (56.01±2.86)mm, respectively, which were significantly larger than those of skeletal Class Ⅱ(P＜0.05). The maxillomandibular width difference of basal bone in the canine, premolar and molar areas of skeletal Class Ⅲ were (4.69±2.84), (2.31±2.39) and (3.27±2.05) mm, respectively, which were significantly less than that of skeletal Class Ⅰ and Ⅱ(P＜0.01). Compared with skeletal Class Ⅰ, the maxillary canines and first molars of skeletal Class Ⅱ had larger lingual inclination level, while the maxillary first premolars and first molars of skeletal Class Ⅲ had larger buccal inclination level, the mandibular canines and the mandibular first premolars of skeletal Class Ⅲ had larger lingual inclination level(P＜0.01). CONCLUSIONS: For normodivergent patients, the width of the mandibular base bone, alveolar bone, and maxillary and mandibular dental arch in skeletal Class Ⅲ is the widest, which is more likely to have width discrepancy in basal bone. In skeletal Class Ⅲ, the maxillary teeth are buccally inclined, and the mandibular teeth are ingually inclined. In skeletal Class Ⅱ, the maxillary teeth are lingually inclined, and the mandibular teeth are compensatory upright.

A forecasting model for suitable dental implantation in canine mandibular premolar region based on finite element analysis.

In recent years, dental implants have become a trend in the treatment of human patients with missing teeth, which may also be an acceptable method for companion animal dentistry. However, there is a gap challenge in determining appropriate implant sizes for different dog breeds and human. In this study, we utilized skull computed tomography data to create three-dimensional models of the mandibles of dogs in different sizes. Subsequently, implants of various sizes were designed and subjected to biomechanical finite element analysis to determine the optimal implant size. Regression models were developed, exploring the relationship between the average weight of dogs and the size of premolar implants. Our results illustrated that the regression equations for mean body weight (x, kg) and second premolar (PM2), third premolar (PM3), and fourth premolar (PM4) implant length (y, mm) in dogs were: y = 0.2785x + 7.8209, y = 0.2544x + 8.9285, and y = 0.2668x + 10.652, respectively; the premolar implant diameter (mm) y = 0.0454x + 3.3506, which may provide a reference for determine suitable clinical implant sizes for dogs.