Microfluidic capillary electrophoresis - mass spectrometry for rapid charge-variant and glycoform assessment of monoclonal antibody biosimilar candidates.

Early-stage cell line screening is a vital step in developing biosimilars of therapeutic monoclonal antibodies (mAbs). While the quality of the manufactured antibodies is commonly assessed by charge-based separation methods employing UV absorbance detection, these methods lack the ability to identify resolved mAb variants. We evaluated the performance of microfluidic capillary electrophoresis coupled to mass spectrometry (MCE-MS) as a rapid tool for profiling mAb biosimilar candidates from clonal cell lines. A representative originator sample was used to develop the MCE-MS method. The addition of dimethylsulfoxide (DMSO) to the background electrolyte yielded up to 60-fold enhancement of the protein MS signal. The resulting electropherograms consistently provided resolution of mAb charge variants within 10 min. Deconvoluted mass spectra facilitated the identification of basic variants such as C-terminal lysine and proline amidation, while the acidic variants could be assigned to deamidated forms. The MCE-MS method also allowed the identification of 18 different glycoforms in biosimilar samples. To mimic early-stage cell line selection, samples from five clonal cell lines that all expressed the same biosimilar candidate mAb were compared to their originator mAb. Based on the similarity observed in charge variants and glycoform profiles acquired by MCE-MS, the most promising candidate could be selected. The MCE-MS method demonstrated good overall reproducibility, as confirmed by a transferability study involving two separate laboratories. This study highlights the efficacy of the MCE-MS method for rapid proteoform screening of clonal cell line samples, underscoring its potential significance as an analytical tool in biosimilar process development.

Qualification of a LC-HRMS platform method for biosimilar development using NISTmab as a model.

Biosimilars are a cost-effective alternative to biopharmaceuticals, necessitating rigorous analytical methods for consistency and compliance. Liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS) is a versatile tool for assessing key attributes, encompassing molecular mass, primary structure, and post-translational modifications (PTMs). Adhering to ICH Q2R1, we validated an LC-HRMS based peptide mapping method using NISTmab as a reference. The method validation parameters, covering system suitability, specificity, accuracy, precision, robustness, and carryover, were comprehensively assessed. The method effectively differentiated the NISTmab from similar counterparts as well as from artificially introduced spiked conditions. Notably, the accuracy of mass error for NISTmab specific complementarity determining region peptides was within a maximum of 2.42 parts per million (ppm) from theoretical and the highest percent relative standard deviation (%RSD) observed for precision was 0.000219 %. It demonstrates precision in sequence coverage and PTM detection, with a visual inspection of total ion chromatogram approach for variability assessment. The method maintains robustness when subjected to diverse storage conditions, encompassing variations in column temperature and mobile phase composition. Negligible carryover was noted during the carryover analysis. In summary, this method serves as a versatile platform for multiple biosimilar development by effectively characterizing and identifying monoclonal antibodies, ultimately ensuring product quality.

Assessment of structural and functional similarity of biosimilar products: Bevacizumab as a case study.

The antiangiogenic drug bevacizumab is a blockbuster therapeutic pharmaceutical product that is used to treat many different types of cancer including kidney, colon, rectum, lung, and breast cancer. As a result, multiple biosimilars have been approved across the various regulatory jurisdictions in India (>20 in number till date). The rapidly growing market and acceptance of biosimilars was the motivation to perform comparability study of bevacizumab biosimilars that are presently available in the Indian market. A comprehensive analytical and functional biosimilarity assessment has been performed to examine and compare innovator product of bevacizumab (Avastin-innovator product, Roche Products (India) Pvt Ltd) and six biosimilars that are being marketed in India (Abevmy from Mylan Pharmaceuticals Pvt Ltd, Bevazza from Lupin Ltd, Bryxta from Zydus Cadila, Krabeva from Biocon, Ivzumab from RPG Life Sciences Ltd, and Advamab from Alkem Laboratories Ltd). Physiochemical characterization of drug products was performed with respect to their primary structure (intact mass, reduced mass, peptide mapping by LC-MS), higher order structure (secondary structure by FTIR, Far-UV-CD, and tertiary structure by Near-UV-CD, intrinsic fluorescence spectroscopy), impurity profile (SE-HPLC, SEC-MALS, extrinsic fluorescence: size heterogenicity, degradation, stability; DLS: hydrodynamic radius; WCX-HPLC: charge variants analysis) and post-translational modifications by measuring reduced glycans through fluorescence dye analysis. Functional characterization was performed by SPR and cell proliferation assay. Further, chemometrics based quantitative evaluation of biosimilarity has been performed by combining the data obtained from analytical characterization platform. The analysis of the analytical, functional and chemometric results revealed significant levels of similarity, with biosimilar4 being the sole exception. Despite being within product specifications, Biosimilar4 displayed significant deviations with respect to critical quality attributes, including a lower proportion of monomer content, a larger percentage of basic charge variant species, and a lower proportion of aglycosylated glycoform.

A rapid discriminative hydrogen-deuterium exchange and LC-HRMS/MS strategy for primary and higher order structural mapping of therapeutic proteins: a case study using filgrastim.

A vast number of therapeutic proteins are approved and available on the market. However, there are very limited analytical approaches available for the rapid determination of primary and higher-order structures which can be utilized for counterfeit identification. In the present study, filgrastim biosimilar products from different manufacturers were considered for developing discriminative orthogonal analytical techniques to determine structural variations. The developed intact mass analytical method and peptide mapping through LC-HRMS were able to differentiate three biosimilars based on deconvoluted mass and possible structural modification, respectively. Another structural attribute employed was charge heterogeneity through isoelectric focusing, which provides a snapshot of the presence of charge variants/impurities and was able to differentiate various marketed formulations of filgrastim. These three techniques can certainly differentiate the products that contain counterfeit drugs due to their capability concerning selectivity. Additionally, a unique HDX technique on LC-HRMS was developed, which can determine the labile hydrogen exposed to deuterium exchange in a specified time. HDX aids in identifying the workup process or changes in the host cell in the counterfeit product by differentiating the protein based on its higher-order structure.

Mass spectrometry-based glycoprofiling of biopharmaceuticals by using an automated data processing tool: SimGlycan®.

The therapeutic and immunological properties of biopharmaceuticals are governed by the glycoforms contained in them. Thus, bioinformatics tools capable of performing comprehensive characterization of glycans are significantly important to the biopharma industry. The primary structural elucidation of glycans using mass spectrometry is tricky and tedious in terms of spectral interpretation. In this study, the biosimilars of a therapeutic monoclonal antibody and an Fc-fusion protein with moderate and heavy glycosylation, respectively, were employed as representative biopharmaceuticals for released glycan analysis using liquid chromatography-tandem mass spectrometry instead of conventional mass spectrometry-based analysis. SimGlycan® is a software with proven ability to process tandem MS data for released glycans could identify eight additional glycoforms in Fc-fusion protein biosimilar, which were not detected during mass spectrometry analysis of released glycans or glyco-peptide mapping of the same molecule. Thus, liquid chromatography-tandem mass spectrometry analysis of released glycans not only complements conventional liquid chromatography-mass spectrometry-based glycan profiling but can also identify additional glycan structures that may otherwise be omitted during conventional liquid chromatography-tandem mass spectrometry based analysis of mAbs. The mass spectrometry data processing tools, such as PMI Byos™, SimGlycan® , etc., can display pivotal analytical capabilities in automated liquid chromatography-mass spectrometry and liquid chromatography-tandem mass spectrometry-based glycan analysis workflows, especially for high-throughput structural characterization of glycoforms in biopharmaceuticals.

Evaluation of physicochemical and functional similarity of a new CHO derived anti-EGFR antibody P-mAb to its reference medicinal product.

Epidermal growth factor receptor (EGFR) is the primary target for the treatment of colorectal cancer, the third most diagnosed cancer worldwide. In recent years, regulatory changes have facilitated the approval of biosimilars aimed to bring more access to biologics to patients. However, it has also expended the requirements of non-clinical characterisation data using state-of-the-art and orthogonal methodologies to demonstrate similarity between proposed biologic and its reference medicinal product (RMP). The current study was aimed to develop a stable CHO-S cell line producing panitumumab biosimilar candidate, P-mAb, a fully human IgG2 anti-EGFR monoclonal antibody and assess its physicochemical and functional similarity with RMP, Vectibix. The single-cell clone from stably transfected CHO-S cell pools was used for the production of P-mAb. This was followed by purification and comparative physicochemical and biological characterisation of P-mAb and RMP using SDS-PAGE, LC/MS, MALDI, MS/MS, CD spectrometry, DSF, SAXS, ITF, MTT assay and binding affinity. SAXS and MST assays are being used for first time in biosimilarity analysis of therapeutic monoclonal antibody. The results of structural and functional analysis of anti-EGFR P-mAb, produced by stable CHO-S cell line revealed high similarity between P-mAb and RMP, vectibix, thus providing the scientific basis of its potential for therapeutic applications.

Detection of recombinant erythropoietin biosimilar Jimaixin™ after administration in healthy subjects.

Jimaixin™ (Jintan Ltd, China) is a biosimilar of recombinant erythropoietin (rEPO) now authorized for therapeutic application in China. With a risk of abuse by athletes, a clear evaluation of its detection using the electrophoretic methods in use in antidoping laboratories was necessary. In a previous work, we showed that Jimaixin™ electrophoretic profile presented slight changes compared with the original drug (first generation rEPO) and that a spike of Jimaixin™ in urine and serum was well identified by SDS-PAGE but with less performance by IEF-PAGE unless a neuraminidase treatment was applied first. The aims of this research were to perform an intravenous administration of Jimaixin™ on three healthy subjects (one microdose [10 IU/kg] and three therapeutic doses [50 IU/kg]) and to evaluate the detection in urine and blood up to 7 days post administration. Analysis of the samples showed that Jimaixin™ detection was complicated by IEF-PAGE due to the loss of the most distinctive basic isoforms. In addition, a neuraminidase treatment did not improve detection (contrary to the observations from spike experiments). On the contrary, Jimaixin™ was very efficiently detected in blood and urine by SDS-PAGE: up to 40 h after a microdose and up to 7 days after the therapeutic doses. The effect of Jimaixin™ on hematological parameters was limited to a clear but transitory increase of the reticulocytes. These data give new elements to better survey a potential misuse of Jimaixin™ by athletes.

Discrepancies between High-Resolution Native and Glycopeptide-Centric Mass Spectrometric Approaches: A Case Study into the Glycosylation of Erythropoietin Variants.

Glycosylation represents a critical quality attribute modulating a myriad of physiochemical properties and effector functions of biotherapeutics. Furthermore, a rising landscape of glycosylated biotherapeutics including biosimilars, biobetters, and fusion proteins harboring complicated and dynamic glycosylation profiles requires tailored analytical approaches capable of characterizing their heterogeneous nature. In this work, we perform in-depth evaluation of the glycosylation profiles of three glycoengineered variants of the widely used biotherapeutic erythropoietin. We analyzed these samples in parallel using a glycopeptide-centric liquid chromatography/mass spectrometry approach and high-resolution native mass spectrometry. Although for all of the studied variants the glycopeptide and native mass spectrometry data were in good qualitative agreement, we observed substantial quantitative differences arising from ionization deficiencies and unwanted neutral losses, in particular, for sialylated glycopeptides in the glycoproteomics approach. However, the latter provides direct information about glycosite localization. We conclude that the combined parallel use of native mass spectrometry and bottom-up glycoproteomics offers superior characterization of glycosylated biotherapeutics and thus provides a valuable attribute in the characterization of glycoengineered proteins and other complex biotherapeutics.

Preparation and characterization of 96-well microplates coated with molecularly imprinted polymer for determination and biosimilarity assessment of recombinant human erythropoietin.

Synthesis and applications of molecularly imprinted polymers (MIP) are rapidly growing. In this study, a biomimetic MIP was prepared through silanes polymerization on the surface of 96-well microplates using recombinant human erythropoietin-alfa (rhEPO) as a template molecule. The rhEPO was immobilized onto the plate surface using bi-functional cross-linker and a thin imprinted layer following sol-gel procedure was constructed. After template extraction, uniform three-dimensional cavities compatible with the configuration of rhEPO were obtained. The rhEPO-MIP preparation was optimized using 2-level factorial design and response surface design where polymerization time and interactions between the different variable were found to be the most significant factors. Size-exclusion chromatography (SEC) was used to monitor the stability of the rhEPO under the investigated polymerization conditions. Determination of rhEPO using the MIP microplate showed good dynamic response fitting to the 4 PL regression model (0.9962) over a concentration range of 10.00 - 100.00 ng mL-1. Adsorption of rhEPO onto MIP followed the Langmuir isotherm model (r = 0.9957, χ2 =0.02786) with pseudo-second-order kinetics (r = 0.9984). The surface of the rhEPO-MIP was characterized using scanning electron microscopy (SEM) while step-by-step surface modification was tracked using Fourier transform infrared (FTIR) spectroscopy. The rhEPO-MIP was able to distinguish between the rhEPO-alfa template and modified rhEPO molecules; rhEPO-beta, hyperglycosylated and pegylated forms (imprinting factors < 2) and in the commonly used formulation additive human serum albumin (HSA) (R% = 113.96 -95.22%). The rhEPO-MIP was applied to compare the receptor-binding pattern to rhEPO and its biosimilars / structural analogues. The results were cross-validated using the conventional assay protocol (RP-HPLC and ELISA) and an acceptable correlation was observed with RP-HPLC (maximum deviation is 7.78%). This work confirmed the applicability of rhEPO-MIP with its unique binding features for batch release, stability and biosimilarity assessment as well as subsequent evaluation of batch-to-batch consistency during bioproduction of target analytes.

Tracking the Behavior of Monoclonal Antibody Product Quality Attributes Using a Multi-Attribute Method Workflow.

The multi-attribute method (MAM) is a liquid chromatography-mass spectrometry based method that is used to directly characterize and monitor many product quality attributes and impurities on biotherapeutics, most commonly at the peptide level. It utilizes high-resolution accurate mass spectral data which are analyzed in an automated fashion. MAM is a promising approach that is intended to replace or supplement several conventional assays with a single LC-MS analysis and can be implemented in a Current Good Manufacturing Practice environment. MAM provides accurate site-specific quantitation information on targeted attributes and the nontargeted new peak detection function allows to detect new peaks as impurities, modifications, or sequence variants when comparing to a reference sample. The high resolution MAM workflow was applied here for three independent case studies. First, to monitor the behavior of monoclonal antibody product quality attributes over the course of a 12-day cell culture experiment providing an insight into the behavior and dynamics of product attributes throughout the process. Second, the workflow was applied to test the purity and identity of a product through analysis of samples spiked with host cell proteins. Third, through the comparison of a drug product and a biosimilar with known sequence variants. The three case studies presented here, clearly demonstrate the robustness and accuracy of the MAM workflow that implies suitability for deployment in the regulated environment.

Isolation and characterization of charge variants of infliximab biosimilar HS626.

Charge variants are the most commonly observed sources of heterogeneity in the routine manufacturing of monoclonal antibodies. To gain further insight into the structural foundation of charge heterogeneity and its influence on biological functions, an infliximab biosimilar HS626 from a biopharmaceutical facility was isolated by semipreparative cation exchange chromatography (CEX) to obtain fractions of acidic and basic charge variants and determine the main species. It was assessed again by CEX to ensure purities. Through a series of structural and physicochemical characterizations, we concluded that the acidic variants were caused by fragments, Met oxidation, Asn deamidation, higher levels of sialylation and galactosylation of N-linked glycans, and less high mannose. The basic variants resulted mainly from aggregates, fragments, and Met oxidation. Through further analysis of antigen binding affinity, cell death inhibitory activity, ADCC, and CDC, as well as FcRn, FcγRIIIa, and C1q affinity, we demonstrated that the charge heterogeneity did not affect biological functions. This research enhances the understanding of charge variants, which are usually effective components that should not be intentionally reduced unless biological functions are affected.

N-glycan Analysis in Molecular Medicine: Innovator and Biosimilar Protein Therapeutics.

The market segment of new biological drugs (monoclonal antibodies, fusion proteins, antibody-drug conjugates, and new modality protein therapeutics) is rapidly growing, especially after the patent expiration of the original biologics, initiating the emergence of biosimilars. N-glycosylation of therapeutic proteins has high importance on their stability, safety, immunogenicity, efficacy, and serum half-life. Therefore, Nglycosylation is considered to be one of the critical quality attributes. Consequently, it should be rigorously monitored during the development, manufacturing, and release of glycoprotein biologicals. In this review, first, the regulatory considerations for biosimilars are shortly summarized, followed by conferring the analytical techniques needed for monitoring and characterization of the N-glycosylation of biological drugs. Particular respect is paid to liquid phase separation techniques with high sensitivity and highresolution detection methods, including laser-induced fluorescence and mass spectrometry.

Sedimentation Velocity Analytical Ultracentrifugation Analysis of Marketed Rituximab Drug Product Size Distribution.

PURPOSE: Analytical methods suitable for intact drug products are often necessary to evaluate the equivalence in physicochemical properties between two drug products (DP) containing the same drug substance (DS), e.g., an innovator biologic drug and its proposed biosimilar. Analytical Ultracentrifugation (AUC) is a biophysics technique applied to the analysis of size and shape of biomolecules. However, the application of AUC to formulated monoclonal antibody (mAb) DP at high concentration has not been reported. METHODS: A sedimentation velocity (SV) AUC procedure with a short-pathlength centerpiece was applied to two marketed rituximab DPs, Rituxan® (US) and Reditux® (India), without any buffer exchange or dilution. Detailed precision analysis was performed. RESULTS: Highly reproducible sedimentation coefficient values (S) and peak areas were obtained for the dominant (> 84%) monomeric rituximab peak. The minor mAb fragment peaks had large variation in both S values and peak areas (3-12%). The identification of oligomer peaks was only reproducible once the abundance was higher than 2%. CONCLUSIONS: SV-AUC provides an orthogonal characterization tool for protein size distribution, composition and assay, which could be informative for biosimilar drug developers who mostly only have access to formulated mAb. However, AUC needs thorough validation on its accuracy, precision and sensitivity.

Analytical comparability study of anti-CD20 monoclonal antibodies rituximab and obinutuzumab using a stability-indicating orthogonal testing protocol: Effect of structural optimization and glycoengineering.

Glycoengineering and biosimilarity are the key factors for growing, promising and progressive approaches in monoclonal antibodies development. In this study, the physicochemical stability of anti-CD20 rituximab (RTX); originator and biosimilar was compared to its glycoengineered humanized version; obinutuzumab (OBZ). An orthogonal stability-indicating protocol using a set of validated bioanalytical techniques; size exclusion high performance liquid chromatography (SE-HPLC), reversed phase liquid chromatography (RP-HPLC), quantitative gel electrophoresis by TapeStation, receptor binding assay and dynamic light scattering (DLS) was used to investigate the effect of different stress factors on the pattern and kinetics of degradation. SE-HPLC results supported with spectral purity showed similar degradation extent with a different pattern of degradation between RTX and OBZ. A lower tendency to form degraded fragments and a relatively higher favorability for degradation through aggregate formation has been revealed in case of OBZ. Results were in agreement with those of DLS and receptor binding assay which showed specificity to the intact antibodies in the presence of their degradation products. Furthermore, results were additionally confirmed through denaturing quantitative gel electrophoresis which suggested reducible covalent bonds as the mechanism for aggregates formation. RP-HPLC results showed two oxidized forms via excessive oxidation of RTX and OBZ with nearly the same degradation percent. Comparability data of RTX and OBZ using the applied methodologies showed that although glycoengineering; carried out to enhance the therapeutic and biological activity of OBZ altered the pattern of degradation but did not significantly affect the overall stability. Results showed also consistent stability profile between the biosimilar and its originator RTX products.

Analytical and Functional Similarity Assessment of ABP 710, a Biosimilar to Infliximab Reference Product.

PURPOSE: ABP 710 has been developed as a biosimilar to infliximab reference product (RP). The objective of this study was to assess analytical similarity (structural and functional) between ABP 710 and infliximab RP licensed by the United States Food and Drug Administration (infliximab [US]) and the European Union (infliximab [EU]), using sensitive, state-of-the-art analytical methods capable of detecting minor differences in product quality attributes. METHODS: Comprehensive analytical characterization utilizing orthogonal techniques was performed with 14 to 28 unique lots of ABP 710 or infliximab RP, depending on the assay. Comparisons were used to investigate the primary structure related to amino acid sequence; post-translational modifications (PTMs) including glycans; higher order structure; particles and aggregates; primary biological properties mediated by target and receptor binding; product-related substances and impurities; and general properties. RESULTS: ABP 710 had the same amino acid sequence, primary structure, higher order structure, PTM profiles and biological activities as infliximab RP. The finished drug product had the same strength (protein content and concentration) as infliximab RP. CONCLUSIONS: Based on the comprehensive analytical similarity assessment, ABP 710 was found to be highly analytically similar to infliximab RP for all biological activities relevant for clinical efficacy and safety.

Quality by Design-Based Assessment for Analytical Similarity of Adalimumab Biosimilar HLX03 to Humira®.

Quality by design (QbD) is an efficient but challenging approach for the development of biosimilar due to the complex relationship among process, quality, and efficacy. Here, the analytical similarity of adalimumab biosimilar HLX03 to Humira® was successfully established following a QbD quality study. Quality target product profile (QTPP) of HLX03 was first generated according to the public available information and initial characterization of 3 batches of Humira®. The critical quality attributes (CQAs) were then identified through risk assessment according to impact of each quality attribute on efficacy and safety. The anticipated range for each CQA was derived from similarity acceptance range and/or the corresponding regulatory guidelines. Finally, a panel of advanced and orthogonal physicochemical and functional tests and comparison of 6 batches of HLX03 and 10 batches of the reference standard demonstrated high similarity of HLX03 to Humira®, except for slightly lower percentage of high mannosylated glycans (%HM) in HLX03 which had no effect on FcγRIII binding and antibody-dependent cell-mediated cytotoxicity (ADCC) activity in human peripheral blood mononuclear cell (PBMC). All above demonstrated the feasibility and efficiency of QbD-based similarity assessment of a biosimilar monoclonal antibody (mAb).

An application of Nano Differential Scanning Fluorimetry for Higher Order Structure assessment between mAb originator and biosimilars: Trastuzumab and Rituximab as case studies.

Differential scanning fluorimetry (DSF) or thermal shift has emerged in recent years as a high-throughput screening method in biotherapeutic formulation studies. The present article reports on a fast-track assessment platform for rapid investigation of therapeutic proteins such as monoclonal antibodies (mAb) with minimal sample concentration, volume, and preparation. The proposed nanoDSF platform has been demonstrated for rapid assessment of two commercial IgG 1 drug products (DP), trastuzumab and rituximab, and their biosimilars with respect to their conformational and colloidal stability. Domain specific differences for each of the IgGs have been elucidated with respect to onset of domain unfolding (Tonset) and melting temperatures. These thermal unfolding and transition midpoint (Tm) measurements are based on the intrinsic aromatic amino acid residue fluorescence of proteins. Moreover, to understand the possibility of nanoDSF as a predictive tool, data from nanoDSF has been correlated with accelerated stability studies. Melting temperatures across brands were found to be highly comparable to the rate of heating, thereby exhibiting a significant domain specific effect on melting temperatures for both trastuzumab and rituximab. Conservation of higher order structure (HOS) through reversible unfolding was also examined and both the mAbs were found to regain tertiary structure up till the first transition midpoint. No clear correlation was found between formation of higher molecular weight species (HMWS) and unfolding parameters (Tonset and Tagg) for accelerated stability studies. Finally, a discussion on the need for fast predictive assessment of conformation and colloidal stability as well as a comparison of advantages and limitations of the technique with routine/classical tools such as circular dichroism spectrophotometry and differential scanning calorimetry has been presented.

Protein NMR of biologicals: analytical support for development and marketed products.

Application of NMR spectroscopy to derive in-depth characterization of structure and dynamical properties of biomolecules is well established nowadays in many laboratories. Most of these methods rest on the availability of protein labeled with stable isotopes like 13C and 15N. In this report examples are presented on the application of NMR spectroscopic methods to characterize biopharmaceutical proteins in cases no isotope labeled material are available. This is typically found in protein samples used in the development of formulations and production processes. Another important focus of this report is the application of NMR methodology in the field of counterfeit drugs of biologicals and biosimilars. Especially here, NMR does offer relevant structural and quantitative data due to the high versatility of the NMR equipment. An excurse regarding the high medical relevance for a detailed spectroscopic analysis of counterfeits will be presented.

Risk-Based Approach for Analytical Comparability and Comparability Protocols.

Chemistry, manufacturing, and control postapproval changes are an intrinsic part of the life cycle of pharmaceutical products. In this paper, the authors examined the potential impact of such changes on the product quality, safety, and efficacy of biologics. Comparability studies and more specifically analytical comparability are introduced as one of the tools that can support both biomanufacturers and health agencies in ensuring that patient safety and product safety and efficacy is maintained through the proposed changes. Together with a scientific risk-based review approach based on product and process knowledge and the definition of acceptance criteria that will ensure that the product is "essentially similar", what constitutes a holistic comparability study is detailed. ICH Guidelines principles and definitions are used throughout the paper to aid the reader with other appropriate references. Finally, two case studies are presented: change to the manufacturing facility of the drug substance, and change to the manufacturing process of a drug substance intermediate and manufacturing facility.

Demonstrating Analytical Similarity of Trastuzumab Biosimilar HLX02 to Herceptin® with a Panel of Sensitive and Orthogonal Methods Including a Novel FcγRIIIa Affinity Chromatography Technology.

BACKGROUND: A biosimilar needs to demonstrate its similarity to the originator reference product (RP) in terms of structural and functional properties as well as nonclinical and clinical outcomes. OBJECTIVES: The aim was to assess the analytical similarity between the trastuzumab biosimilar HLX02 and Europe-sourced Herceptin® (EU-Herceptin®) and China-sourced Herceptin® (CN-Herceptin®) following a quality-by-design (QbD) quality study and tier-based quality attribute evaluation. METHODS: A panel of highly sensitive and orthogonal methods, including a novel Fc gamma receptor IIIa (FcγRIIIa) affinity chromatography technique that enables quantitative comparison of glycan effects on effector function, was developed for the assessment. To ensure the full product variability was captured, ten batches of HLX02 were compared with 39 RP batches with expiry dates from August 2017 to March 2021. RESULTS: The extensive three-way similarity assessment demonstrated that HLX02 is highly similar to the RPs. Furthermore, the %afucose, %galactose, and FcγRIIIa affinity of the RPs were observed to first decrease and then return to the original level in relation to their expiry dates, and the RP batches can be subgrouped by their FcγRIIIa affinity chromatograms. HLX02 is demonstrated to be more similar to the RPs of the high FcγRIIIa affinity group. CONCLUSION: Besides having an overall high analytical similarity to both EU-Herceptin® and CN-Herceptin®, HLX02 is more similar to Herceptin® with high FcγRIIIa affinity, a result that demonstrates the power of the novel FcγRIIIa affinity chromatography technology in biosimilarity evaluation.