ABSTRACT
OBJECTIVE: To compare the efficacy and clinical outcomes of computed tomography (CT)-based virtual surgical planning (VSP) and a three-dimensional (3D)-printed, patient-specific reduction system to conventional indirect reduction techniques for diaphyseal tibial fractures stabilized using minimally invasive plate osteosynthesis (MIPO) in dogs. STUDY DESIGN: A prospective clinical study with a historic control cohort. SAMPLE POPULATION: Dogs undergoing MIPO stabilization of diaphyseal tibial fractures using a custom 3D-printed reduction system (3D-MIPO; n = 15) or conventional indirect reduction techniques (c-MIPO; n = 14). METHODS: Dogs were prospectively enrolled to the 3D-MIPO group and CT scans were used to design and fabricate a custom 3D-printed reduction system to facilitate MIPO. Medical records were searched to identify dogs for the c-MIPO group. Pre-, intra- and postoperative parameters were compared between groups. RESULTS: The duration from presentation until surgery was 23 h longer in the 3D-MIPO group (p = .002). Fewer intraoperative fluoroscopic images were acquired (p < .001) and mean surgical duration was 34 min shorter in the 3D-MIPO group (p = .014). Median postoperative tibial length, frontal alignment, and sagittal alignment were within 4 mm, 3° and 3°, respectively, of the contralateral tibia in both groups and did not differ between reduction groups (p > .1). Postoperative complications occurred in 27% and 14% of fractures in the 3D-MIPO and c-MIPO groups, respectively. CONCLUSION: Both reduction methods yielded comparable results. Although the preoperative planning and guide preparation was time consuming, surgery times were shorter and fluoroscopy use was less in the 3D-MIPO group. CLINICAL SIGNIFICANCE: VSP and the custom 3D-printed reduction system facilitated efficient MIPO.
Subject(s)
Bone Plates , Fracture Fixation, Internal , Printing, Three-Dimensional , Tibial Fractures , Animals , Dogs/surgery , Dogs/injuries , Fracture Fixation, Internal/veterinary , Fracture Fixation, Internal/methods , Fracture Fixation, Internal/instrumentation , Tibial Fractures/surgery , Tibial Fractures/veterinary , Tibial Fractures/diagnostic imaging , Bone Plates/veterinary , Male , Female , Case-Control Studies , Prospective Studies , Tomography, X-Ray Computed/veterinary , Minimally Invasive Surgical Procedures/veterinary , Minimally Invasive Surgical Procedures/methods , Dog Diseases/surgery , Surgery, Computer-Assisted/veterinary , Surgery, Computer-Assisted/methodsABSTRACT
In addition to the clinical burden of trauma, the financial burden is an important aspect of care globally, especially for patients in low- and middle-income countries. The current retrospective review was done of data from January 2015 to December 2020 related to patients of oral maxillofacial trauma management in a tertiary care setting. Analysis of variance was used to determine the mean difference in the cost incurred depending upon the type of trauma and the number of bone plates used in fracture management. Pearson correlation was applied to explore any correlation involving patient age, aetiology and type of fracture, number of bone plates employed and the length of stay in the hospital. No statistically significant differences were noted in the cost among the different groups. The cost of care was significantly (p<0.001) correlated to the length of stay. Other variables, such as the type of fractures and the number of plates, had no significant impact (p>0.05).
Subject(s)
Length of Stay , Maxillofacial Injuries , Tertiary Care Centers , Humans , Pakistan , Length of Stay/statistics & numerical data , Length of Stay/economics , Retrospective Studies , Tertiary Care Centers/economics , Male , Female , Adult , Middle Aged , Maxillofacial Injuries/economics , Maxillofacial Injuries/therapy , Maxillofacial Injuries/epidemiology , Young Adult , Adolescent , Bone Plates/economics , Mandibular Fractures/economics , Mandibular Fractures/therapy , Mandibular Fractures/surgery , Fracture Fixation, Internal/economics , Fracture Fixation, Internal/methods , Aged , Child , Health Care Costs/statistics & numerical data , Maxillary Fractures/economics , Maxillary Fractures/surgery , Maxillary Fractures/therapyABSTRACT
OBJECTIVES: The aim of the present meta-analysis was to compare the efficacy and safety of the carbon fiber-reinforced polyetheretherketone (CFR-PEEK) and titanium plate for the treatment of proximal humeral fractures (PHFs) from clinical comparative trials. MATERIALS AND METHODS: A comprehensive search of English databases was carried out, such as PubMed, Web of Science, ScienceDirect, Springer and Cochrane Library databases. The RevMan version 5.1 software was applied for statistical analysis, and the mean difference (MD) and risk difference (RD) as the combined variables, and "95%" as the confidence interval (CIs). RESULTS: One randomized-controlled trial and five retrospective controlled studies including 282 PHFs were considered eligible and finally included. Meta-analysis demonstrated that there were significant differences in Constant score (CS) (MD=9.23; 95% CI: 5.02, 13.44; p<0.0001), anterior elevation (MD=18.83; 95% CI: 6.27, 31.38; p=0.003), lateral elevation (MD=18.42; 95% CI: 3.64, 33.19; p=0.01) and adduction (MD=3.53; 95% CI: 0.22, 6.84; p=0.04). No significant differences were observed regarding Constant score compared to the contralateral shoulder, Oxford Shoulder Score, internal rotation, external rotation, screw perforation and cutout, varus/valgus malalignment, humeral head collapse/necrosis, implant removal, and revision surgery between the two groups. CONCLUSION: Compared to titanium plate, CFR-PEEK plate showed better Constant score, anterior elevation, lateral elevation and adduction in treating PHFs. The complications are comparable to those achieved with conventional titanium plates.
Subject(s)
Benzophenones , Bone Plates , Carbon Fiber , Fracture Fixation, Internal , Ketones , Polyethylene Glycols , Polymers , Shoulder Fractures , Titanium , Humans , Shoulder Fractures/surgery , Fracture Fixation, Internal/methods , Fracture Fixation, Internal/instrumentation , Treatment Outcome , CarbonABSTRACT
OBJECTIVES: The purpose of this study was to investigate the relationship between patient demographics and potential intraoperative factors and delayed bone union in opening wedge high tibial osteotomy (OWHTO). PATIENTS AND METHODS: A retrospective review of 65 patients (37 females, 28 males; mean age: 60.1±10.1 years; range, 44 to 77 years) who underwent OWHTO using an angle-stable implant with beta-tricalcium phosphate gap filling between September 2016 and October 2019 was conducted. The osteotomy site was divided into five zones from the lateral hinge on anteroposterior radiographs, and we defined the zone in which bone healing was observed. The bone union area was assessed according to this definition at three, six, nine, and 12 months after surgery, and bone union was defined as union at the fourth zone or greater. A generalized estimating equations approach was employed to investigate longitudinal data pertaining to bone union area as a dependent variable. In addition, the association of bone union at six months postoperatively and predictors were evaluated using cross-sectional statistical methods. The categorical predictors included in the models were smoking, diabetes, hinge fracture, and autologous osteophyte grafting. The continuous variables included in the models were age, body mass index, opening gap width, and plate position. RESULTS: Smoking (odds ratio [OR]=0.478, p<0.01), large opening gap width (OR=0.941, p=0.014), and anterior plate placement (OR=0.971, p<0.01) were significantly associated with decreased bone union area. Union rate at six months in smokers was significantly lower compared to nonsmokers (16.6% and 67.8%, respectively; OR=0.10, p=0.023). Area under the curve in the receiver operating characteristic analysis for bone union at six months was 0.60 for gap width and 0.63 for plate placement. CONCLUSION: Smoking, large opening gap width, and anterior plate placement are risk factors for delayed bone union after OWHTO. Surgeons should avoid anterior placement of the plate and carefully consider other options for smokers and those who require a large correction.
Subject(s)
Osteotomy , Tibia , Humans , Middle Aged , Female , Male , Osteotomy/methods , Osteotomy/adverse effects , Retrospective Studies , Adult , Aged , Tibia/surgery , Tibia/diagnostic imaging , Risk Factors , Osteoarthritis, Knee/surgery , Osteoarthritis, Knee/diagnostic imaging , Bone Plates , Cross-Sectional Studies , Smoking/adverse effectsABSTRACT
OBJECTIVE: To investigate the effect of locking plate internal fixation for the treatment of proximal lateral femoral wall fracture. METHODS: From January 2021 to June 2022, 31 patients with intertrochanteric fractures and lateral wall fractures were treated. Among them, 15 patients were treated with proximal femoral nail antirotation (PFNA) fixation including 3 males and 12 females with an average age of (75.87±7.46) years old;the other 16 patients were treated with 3.5 mm pre-curved screw locking plate fixtion for lateral wall fracture including 4 males and 12 females with an average age of (76.15±9.47) years old. After surgery, the surgical index, tip-apical distance(TAD), postoperative standing weight-bearing time, and fracture reduction were compared between two groups. Postoperative hip function was evaluated according to Harris hip score. RESULTS: All patients were followed up for an average of (12±5) months ranging from 7 to 17 months. The immediate postoperative neck angle ranged from 111° to 132°(119.3±8.3)°. Fracture reduction results were excellent in 11 cases, fair in 2, worse in 1 in PFNA group;excellent in 12, fair in 3, worse in 1 in PFNA+locking plate group. One case of the PFNA group had a spiral blade cut out through the femoral head. There were significant differences in the time of operation, the amount of blood loss during the operation, the length of incision between two groups(P<0.05). There was no significant difference in TAD and postoperative standing weight-bearing time between two groups(P>0.05). There were significant differences in Harris scores at 6 months after surgery between two groups(P<0.05). CONCLUSION: The application of PFNA-assisted locking plate in the treatment of femoral intertrochanteric fractures with lateral wall fractures is effective, and can restore the integrity of lateral wall, improve the stability of PFNA internal fixation, and reduce postoperative complications.
Subject(s)
Bone Nails , Bone Plates , Fracture Fixation, Internal , Hip Fractures , Humans , Female , Male , Aged , Hip Fractures/surgery , Fracture Fixation, Internal/methods , Aged, 80 and over , Middle AgedABSTRACT
BACKGROUND: Distal tibial fractures represent common lower limb injuries, frequently accompanied by significant soft tissue damage. The optimal surgical approach for managing these fractures remains a topic of considerable debate. The aim of this study was to perform a comparative analysis of the outcomes associated with retrograde intramedullary tibial nails (RTN) and minimally invasive plate osteosynthesis (MIPO) in the context of treating extra-articular distal tibial fractures. METHODS: A retrospective review was conducted on a cohort of 48 patients who sustained extra-articular distal tibial fractures between December 2019 and December 2021. Patients underwent either RTN or MIPO procedures. Various parameters, including operative duration, intraoperative fluoroscopy exposure, time to union, duration until full weight-bearing, American Orthopedic Foot and Ankle Society (AOFAS) scores, and complications, were recorded and compared between the two treatment groups. RESULTS: No statistically significant differences were observed in operative duration, time to union, angulation of the distal tibial coronal plane, or AOFAS scores between the RTN and MIPO groups. However, the RTN group had a higher average number of intraoperative fluoroscopy images (8.2 ± 2.3) compared to the MIPO group (4.1 ± 2.0). The RTN group demonstrated shorter average hospital stays (7.1 ± 1.4 days) and a quicker return to full weight-bearing (9.9 ± 1.3 weeks), which were significantly superior to the MIPO group (9.0 ± 2.0 days and 11.5 ± 1.5 weeks, respectively). In terms of complications, the RTN group had one case of superficial infection, whereas the MIPO group exhibited two cases of delayed union and nonunion, two occurrences of deep infection, and an additional three cases of superficial infection. CONCLUSIONS: Both RTN and MIPO are effective treatment options for extra-articular distal tibial fractures. However, RTN may offer superior outcomes in terms of decreased inpatient needs, faster return to full weight-bearing capacity, and a lower rate of complications.
Subject(s)
Bone Nails , Bone Plates , Fracture Fixation, Intramedullary , Minimally Invasive Surgical Procedures , Tibial Fractures , Humans , Retrospective Studies , Tibial Fractures/surgery , Tibial Fractures/diagnostic imaging , Male , Female , Middle Aged , Minimally Invasive Surgical Procedures/methods , Adult , Fracture Fixation, Intramedullary/methods , Fracture Fixation, Intramedullary/instrumentation , Treatment Outcome , Operative Time , Aged , Fracture Fixation, Internal/methods , Fracture Fixation, Internal/instrumentation , Weight-Bearing , FluoroscopyABSTRACT
This study aimed to compare the biomechanical performance of an intramedullary nail combined with a reconstruction plate and a single intramedullary nail in the treatment of unstable intertrochanteric femoral fractures with a fracture of the lateral femoral wall (LFW). A three-dimensional finite element (FE) femur model was established from computed tomography images of a healthy male volunteer. A major reverse obliquity fracture line, associated with a lesser trochanteric fragment defect and a free bone fragment of the LFW, was developed to create an AO/OTA type 31-A3.3 unstable intertrochanteric fracture mode. Two fixation styles were simulated: a long InterTAN nail (ITN) with or without a reconstruction plate (RP). A vertical load of 2100 N was applied to the femoral head to simulate normal walking. The construct stiffness, von Mises stress, and model displacement were assessed. The ITN with RP fixation (ITN/RP) provided higher axial stiffness (804 N/mm) than the ITN construct (621 N/mm). The construct stiffness of ITN/RP fixation was 29% higher than that of ITN fixation. The peak von Mises stress of the implants in the ITN/RP and ITN models was 994.46 MPa and 1235.24 MPa, respectively. The peak stress of the implants in the ITN/RP model decreased by 24% compared to that of the ITN model. The peak von Mises stress of the femur in the ITN/RP model was 269.06 MPa, which was lower than that of the ITN model (331.37 MPa). The peak stress of the femur in the ITN/RP model was 23% lower than that of the ITN model. The maximum displacements of the ITN/RP and ITN models were 12.12 mm and 13.53 mm, respectively. The maximum displacement of the ITN/RP model decreased by 12% compared with that of the ITN model. The study suggested that an additional plate fixation could increase the construct stiffness, reduce the stresses in the implant and femur, and decrease displacement after intramedullary nailing. Therefore, the intramedullary nail and reconstruction plate combination may provide biomechanical advantages over the single intramedullary nail in unstable intertrochanteric fractures with a fractured LFW.
Subject(s)
Bone Nails , Bone Plates , Finite Element Analysis , Fracture Fixation, Intramedullary , Hip Fractures , Humans , Fracture Fixation, Intramedullary/methods , Fracture Fixation, Intramedullary/instrumentation , Male , Biomechanical Phenomena , Hip Fractures/surgery , Femoral Fractures/surgery , Tomography, X-Ray Computed/methods , Femur/surgeryABSTRACT
BACKGROUND: Although the microplate system is commonly used for the treatment of maxillofacial fractures, its use in the fixation of mandibular fractures is not widely accepted. OBJECTIVES: The study aimed to evaluate and compare the efficacy of microplates and miniplates in osteosynthesis for the internal fixation of undisplaced and minimally displaced anterior mandibular fractures. MATERIAL AND METHODS: A total of 40 patients diagnosed with undisplaced or minimally displaced symphyseal and parasymphyseal fractures were randomly assigned to 2 study groups (group A and group B). Patients in group A (microplate group) were treated with two 0.8-mm microplates, whereas patients in group B (miniplate group) received two 2.0-mm miniplates. Bite force values were recorded in 30 healthy individuals (control group) to establish baseline values. Postoperative bite force values were recorded at various intervals and compared between the study groups and the control group. RESULTS: Both groups demonstrated a progressive improvement in the bite force. However, the bite force values recorded at the 2nd, 4th and 6th postoperative weeks were comparatively lower in the microplate group. At the six-week follow-up, the bite force values were lower in both study groups in comparison to the control group. There were no differences in the incidence of postoperative complications between the study groups. CONCLUSIONS: The use of microplates in the management of undisplaced or minimally displaced anterior mandibular fractures results in a reduction in the recovery of biting force in comparison to the conventional miniplate system.
Subject(s)
Bite Force , Bone Plates , Fracture Fixation, Internal , Mandibular Fractures , Humans , Mandibular Fractures/surgery , Fracture Fixation, Internal/instrumentation , Male , Female , Adult , Young Adult , Middle Aged , Treatment OutcomeABSTRACT
Secondary healing of fractured bones requires an application of an appropriate fixator. In general, steel or titanium devices are used mostly. However, in recent years, composite structures arise as an attractive alternative due to high strength to weight ratio and other advantages like, for example, radiolucency. According to Food and Drug Administration (FDA), the only unidirectionally reinforced composite allowed to be implanted in human bodies is carbon fiber (CF)-reinforced poly-ether-ether-ketone (PEEK). In this work, the healing process of long bone assembled with CF/PEEK plates with cross- and angle-ply lay-up configurations is studied in the framework of finite element method. The healing is simulated by making use of the mechanoregulation model basing on the Prendergast theory. Cells transformation is determined by the octahedral shear strain and interstitial fluid velocity. The process runs iteratively assuming single load cycle each day. The fracture is subjected to axial and transverse forces. In the computations, the Abaqus program is used. It is shown that the angle-ply lamination scheme of CF/PEEK composite seems to provide better conditions for the transformation of the soft callus into the bone tissue.
Subject(s)
Benzophenones , Bone Plates , Carbon Fiber , Fracture Healing , Ketones , Polyethylene Glycols , Polymers , Ketones/chemistry , Carbon Fiber/chemistry , Polyethylene Glycols/chemistry , Polymers/chemistry , Humans , Carbon/chemistry , Fractures, Bone , Finite Element AnalysisABSTRACT
BACKGROUND: There are many options for the surgical treatment of pronation external rotation (PER) type IV ankle fractures, including the use of fibular plates and screws, the aim of this study was to investigate the biomechanical stability and safety of different internal fixation methods for PER type IV ankle fractures via finite element analysis. METHODS: A three-dimensional finite element model of the ankle joint and the whole foot of a healthy 26-years-old adult male was established and validated based on computed tomography images of his lower limb, and a computer-aided design was used to produce a PER type IV ankle fracture and plate and screw model. Four different internal fixation modes were simulated, including a (all ankle fixation-utilizing a fibular plate and screws for comprehensive stabilization of the ankle), b (inferior tibiofibular joint fixation + all ankle fixation), c (inferior tibiofibular joint fixation + unfixed anterior ankle), and d (inferior tibiofibular joint fixation + unfixed anterior and posterior ankles). The results of the four different fixation methods were compared via finite element analysis, and the von Mises stresses. The displacements of the four different fixation methods were analyzed as the output indices. RESULTS: There were no significant differences between the results of using fibular plates and screws and the displacement of fracture breaks among the four internal fixation modalities. The von Mises stress in the tibiotalar joint, median ankle, posterior ankle, and anterior ankle was minimized in the working condition of d, d, b, and d respectively. The von Mises stress in the fibular plate and screws was minimized in the working condition of a. The von Mises stress in the distal fibula was minimized in the working condition of a. However, the stress was mainly concentrated at the attachment point of the inferior tibiofibular anterior ligament, and in the working condition with inferior tibiofibular joint fixation, the stress was significantly concentrated in the inferior tibiofibular joint screw in all the fibular plates and screws. CONCLUSIONS: The results of this study demonstrate the feasibility of using finite element analysis to compare the biomechanical stability and safety of four configurations of fibular plates and screws for treating PER type IV ankle fractures. All four modalities provided comparable biomechanical stability and safety, showing no significant differences. However, the current limitations of the finite element analysis methodology preclude specific clinical inferences. Further refinement of the methodology in future studies is necessary to enable reliable clinical applications.
Subject(s)
Ankle Fractures , Finite Element Analysis , Fracture Fixation, Internal , Humans , Ankle Fractures/surgery , Ankle Fractures/diagnostic imaging , Fracture Fixation, Internal/methods , Fracture Fixation, Internal/instrumentation , Male , Adult , Bone Plates , Bone Screws , Biomechanical Phenomena , Ankle Joint/surgery , Ankle Joint/diagnostic imaging , Ankle Joint/physiopathologyABSTRACT
Objective: To explore effectiveness of minimally invasive internal fixation with locking plates for mid-shaft clavicle fractures. Methods: Between October 2022 and August 2023, 28 patients with mid-shaft clavicle fractures were treated by minimally invasive internal fixation with locking plates. There were 10 males and 18 females with a mean age of 46.2 years (range, 18-74 years). The fractures were caused by traffic accident in 16 patients, sports-related injury in 7 patients, and other injuries in 5 patients. According to Robinson classiï¬cation, the fractures were classified as type 2A1 in 1 case, type 2A2 in 6 cases, type 2B1 in 15 cases, and type 2B2 in 6 cases. The interval between fracture and operation ranged from 5 hours to 21 days (median, 1.0 days). The pain visual analogue scale (VAS) score was 8.1±1.6. The VAS score at 3 days after operation and the occurrence of complications after operation were recorded. During follow-up, X-ray films were re-examined to observe the healing of the fracture; the shoulder joint function was evaluated according to the Constant-Murley score at 6 months, and the length of the incision scar (total length of the distal and proximal incisions) was measured. Results: All operations were successfully completed without any subclavian vascular or nerve damage. All incisions healed by first intention. The VAS score was 1.2±0.7 at 3 days after operation, and there was a significant difference in VAS score between pre- and post-operation ( t=8.704ï¼ P<0.001). At 1 week after operation, the patient's shoulder was basically painless, and they resumed normal life. All patients were followed up 12-20 months (mean, 13.3 months). X-ray films showed that the bone callus began to form at 2-4 months after operation (mean, 2.7 months). There was no delayed healing or non healing of the fracture, and no loosening or fracture of the internal fixators during follow-up. At 6 months after operation, the mean total incision length was 1.5 cm (range, 1.1-1.8 cm); no patient complained of numbness or paresthesia on subclavicular region or anterior chest wall. The Constant-Murley score of shoulder joint function was 93-100 (mean, 97.6). Conclusion: Minimally invasive internal fixation with locking plates is a good surgical method for treating mid-shaft clavicle fractures, with simple operation, minimal trauma, good postoperative results, and high satisfaction.
Subject(s)
Bone Plates , Clavicle , Fracture Fixation, Internal , Fractures, Bone , Minimally Invasive Surgical Procedures , Humans , Clavicle/injuries , Clavicle/surgery , Male , Fracture Fixation, Internal/methods , Fracture Fixation, Internal/instrumentation , Female , Middle Aged , Adult , Minimally Invasive Surgical Procedures/methods , Fractures, Bone/surgery , Aged , Adolescent , Young Adult , Treatment Outcome , Fracture HealingABSTRACT
Objective: To compare the effectiveness of open reduction and hook plate fixation versus closed indirect reduction and dorsal extension blocking Kirschner wire fixation for bony mallet fingers. Methods: The clinical data of 68 patients with bony mallet finger who admitted between May 2019 and June 2022 were retrospectively analyzed. Among them, 33 cases were in the open group (treated with open reduction and hook plate fixation) and 35 cases were in the closed group (treated with closed indirect reduction and dorsal extension blocking Kirschner wire fixation). There was no significant difference between the two groups in terms of gender, age, the affected side, the affected finger, cause of injury, time from injury to operation, and Wehbé-Schneider classification ( P>0.05). The operation time, intraoperative fluoroscopy frequency, fracture healing time, time of returning to work, and postoperative complications were recorded and compared between the two groups. At 12 months after operation, visual analogue scale (VAS) score was used to assess the pain of the injured finger, active flexion range of motion and extension deficit of the distal interphalangeal joint (DIP) were measured by goniometer, and the effectiveness was assessed by Crawford criteria. Results: All patients in the two groups were followed up 12-26 months, with an average of 15 months. There was no significant difference in the follow-up time between the closed group and the open group ( P>0.05). The operation time in the closed group was shorter than that in the open group, and the intraoperative fluoroscopy times, the fracture healing time, and the time of returning to work in the closed group were more than those in the open group, and the differences were significant ( P<0.05). In the closed group, there were 5 cases of pinning tract infection and 3 cases of small area pressure ulcer skin necrosis on the dorsal side of the finger, which were cured after intensive nursing and dressing change. Local nail depression deformity occurred in 7 cases in the open group, and the deformity disappeared after removal of plate. The incisions of the other patients healed uneventfully without complications such as infection, skin necrosis, exposure of the internal fixation, or nail deformity. There was no significant difference in the incidence of skin necrosis between the two groups ( P>0.05), but the differences in the incidence of infection and nail deformity between the two groups were significant ( P<0.05). There was no significant difference in VAS score, DIP active flexion range of motion, DIP extension deficiency, or Crawford criteria evaluation between the two groups at 12 months after operation ( P>0.05). At last follow-up, there was no DIP osteoarthritis and joint degeneration in both groups. Conclusion: Open reduction and hook plate fixation versus closed indirect reduction and dorsal extension blocking Kirschner wire fixation have their own advantages and disadvantages, but both of them have good results in the treatment of bony mallet fingers. Open reduction and hook plate fixation is recommended for young patients with bony mallet fingers who are eager to return to work.
Subject(s)
Bone Plates , Bone Wires , Finger Injuries , Fracture Fixation, Internal , Fracture Healing , Humans , Fracture Fixation, Internal/methods , Fracture Fixation, Internal/instrumentation , Male , Female , Finger Injuries/surgery , Treatment Outcome , Range of Motion, Articular , Fractures, Bone/surgery , Adult , Operative Time , Open Fracture Reduction/methodsABSTRACT
Objective: To explore the application of improved carpal shoot through view (ICSTV) method in the treatment of distal radius fractures with volar plate internal fixation. Methods: The clinical data of 67 patients with distal radius fractures who met the selection criteria between January 2020 and January 2023 was retrospectively analyzed. There were 30 males and 37 females with an average age of 53.6 years (range, 18-75 years). According to the AO/Orthopaedic Trauma Association (AO/OTA) classification, there were 25 cases of type B and 42 cases of type C. The time from injury to operation ranged from 2 to 6 days, with an average of 3.8 days. During the operation, bilateral cortical drilling was performed, and the length of the implanted screw was 1-2 mm shorter than that measured by the depth ruler. Standard anteroposterior and lateral (AAL) fluoroscopy and ICSTV fluoroscopy were performed after volar anatomic locking plate fixation, respectively. If the dorsal cortex of the distal radius was detected to be penetrated, the short screw was replaced and ICSTV fluoroscopy was performed again until no screw was penetrated. The detection rate of dorsal cortical screw penetration was compared between AAL fluoroscopy and ICSTV fluoroscopy. Postoperative CT scan was performed to confirm the presence or absence of dorsal cortical screw penetration. Results: Intraoperative AAL fluoroscopy found 5 screws penetrating the dorsal cortex in 4 patients (6.0%), and ICSTV fluoroscopy found 19 screws penetrating the dorsal cortex in 15 patients (22.4%) including the above 4 patients, with a significant difference in the detection rate between the two fluoroscopy methods [ OR=0.267 (0.084, 0.845), P=0.018]; 15 patients were replaced with short screws during operation. At the same time, ICSTV fluoroscopy detected 2 screws penetrating into the distal radioulnar joint in 2 cases (3.0%), which could not be found in AAL fluoroscopy, and the direction of the screws was adjusted and replaced. All patients were reexamined by wrist CT within 3 days after operation, and no dorsal cortical screw penetration or screw penetration into the distal radioulnar joint was found. All the 67 patients were followed up 6-18 months, with an average of 11.3 months. Extensor tendon irritation occurred in 2 patients at 3 months after operation, and no extensor tendon rupture occurred in all patients during follow-up. All fractures healed well, and the healing time was 8-13 weeks, with an average of 10.8 weeks. There was no complication such as internal fixation loosening or fracture displacement. The Gartland-Werley score at last follow-up ranged from 0 to 15, with an average of 5.6. Conclusion: ICSTV fluoroscopy can effectively detect occult dorsal cortical screw penetration of the distal radius that can not be revealed by AAL fluoroscopy.
Subject(s)
Bone Plates , Bone Screws , Fracture Fixation, Internal , Radius Fractures , Humans , Fracture Fixation, Internal/methods , Fracture Fixation, Internal/instrumentation , Male , Middle Aged , Female , Radius Fractures/surgery , Adult , Aged , Adolescent , Young Adult , Fluoroscopy , Palmar Plate/surgery , Wrist FracturesABSTRACT
Distalization of mandibular molars comes with significant challenges, especially in adult and young adult patients. In selected cases, third molar extraction procedures offer the opportunity to place miniplates for anchorage to distalize mandibular molars, providing additional solutions to the traditional extraction of premolars or a single incisor. This approach can be of special interest to adult patients, who may have life commitments and time restraints that limit traditional orthodontic and surgical treatment options, and it can improve the efficiency of dental care. This case series describes 3 clinical scenarios in which miniplates were placed with minimal invasiveness during the removal of impacted third molars, offering the patients nontraditional orthodontic treatment options. Awareness of these options is essential for general dentists so that they can explain all treatment possibilities and provide appropriate referrals to patients with impacted third molars.
Subject(s)
Orthodontic Anchorage Procedures , Tooth, Impacted , Humans , Female , Orthodontic Anchorage Procedures/instrumentation , Orthodontic Anchorage Procedures/methods , Tooth, Impacted/surgery , Tooth, Impacted/therapy , Tooth Extraction , Tooth Movement Techniques/methods , Tooth Movement Techniques/instrumentation , Referral and Consultation , Molar, Third/surgery , Bone Plates , Male , Adult , General Practice, Dental , Young Adult , Mandible/surgeryABSTRACT
BACKGROUND: Due to its unique anatomical characteristics, supracondylar fractures of the humerus are often difficult to achieve firm fixation with internal fixation equipment, resulting in delayed functional exercise, often leaving cubitus varus deformity, elbow stiffness, contractures, and other complications. Here, we report an adult patient with a supracondylar fracture of the humerus who underwent internal fixation through an anterior median incision in the humerus with our self-developed anterior anatomical locking plate of the distal humerus. CASE PRESENTATION: A 29-year-old male patient of Chinese ethnicity with trauma-induced right supracondylar fracture of the humerus and multiple soft tissue contusions, without nerve damage, blood vessel damage, or other injuries, underwent an internal incision in our hospital using a new anatomical locking plate for the anterior distal humerus fixed treatment. During the 16-month follow-up period, the patient's elbow range of motion was almost completely restored, functional scores were excellent, and there were no minor or major postoperative complications. CONCLUSION: In this study, we propose a surgical reconstruction strategy for adult patients with supracondylar humeral fractures. Through the anterior median incision of the humerus, open reduction and internal fixation were performed with an anatomic locking plate on the anterior side of the distal humerus to restore and fix the structure of the distal humerus, and satisfactory clinical results were achieved in our case.
Subject(s)
Bone Plates , Fracture Fixation, Internal , Humeral Fractures , Range of Motion, Articular , Humans , Male , Adult , Humeral Fractures/surgery , Fracture Fixation, Internal/methods , Elbow Joint/surgery , Treatment Outcome , Elbow InjuriesABSTRACT
Recent studies report the overall incidence of distal femur fractures as 8.7/100,000/year. This incidence is expected to rise with high energy motor vehicle collisions and elderly osteoporotic fractures in native and prosthetic knees keep increasing. These fractures are more common in males in the younger age spectrum while females predominate for elderly osteoporotic fractures. Surgical treatment is recommended for these fractures to maintain articular congruity, enable early joint motion and assisted ambulation. Over the last two decades, development of minimally invasive and quadriceps sparing surgical approaches, availability of angle stable implants have helped achieve predictable healing and early return to function in these patients. Currently, laterally positioned locked plate is the implant of choice across all fracture patterns. Retrograde with capital implantation of intramedullary nails with provision for multiplanar distal locking is preferred for extra-articular and partial articular fractures. Even with these advancements, nonunion after distal femur fracture fixation can be as high as 19%. Further recent research has helped us understand the biomechanical limitations and healing problems with lateral locked plate fixation and intramedullary nails. This has lead to development of more robust constructs such as nail-plate and double plate constructs aiming for improved construct strength and to minimise failures. Early results with these combination constructs have shown promise in high risk situations such as fractures with extensive metaphyseal fragmentation, osteoporosis and periprosthetic fractures. These constructs however, run the risk of being over stiff and can inhibit healing if not kept balanced. The ideal stiffness that is needed for fracture healing is not clearly known and current research in this domain has lead to the development of smart implants which are expected to evolve and may help improve clinical results in future.
Subject(s)
Bone Plates , Femoral Fractures, Distal , Fracture Fixation, Intramedullary , Fracture Healing , Aged , Female , Humans , Male , Biomechanical Phenomena , Bone Nails , Femoral Fractures, Distal/physiopathology , Femoral Fractures, Distal/surgery , Fracture Fixation, Internal/methods , Fracture Fixation, Intramedullary/methods , Fracture Healing/physiology , Osteoporotic Fractures/surgery , Osteoporotic Fractures/physiopathology , Treatment OutcomeABSTRACT
BACKGROUND AND OBJECTIVE: Complex acetabular fractures involving quadrilateral areas are more challenging to treat during surgery. To date, there has been no ideal internal fixation for these acetabular fractures. The purpose of this study was to evaluate the biomechanical stability of complex acetabular fractures using a dynamic anterior titanium-plate screw system of the quadrilateral area (DAPSQ) by simulating the standing and sitting positions of pelvic specimens. MATERIALS AND METHODS: Eight formal in-preserved cadaveric pelvises aged 30-50 years were selected as the research objects. First, one hip of the normal pelvises was randomly used as the control model (group B) for measurement, and then one hip of the pelvises was randomly selected to make the fracture model in the 8 intact pelvises as the experimental model (group A) for measurement. In group A, acetabular both-column fractures in the quadrilateral area were established, and the fractures were fixed by DAPSQ. The biomechanical testing machine was used to load (simulated physiological load) from 400 N to 700 N at a 1 mm/min speed for 30 s in the vertical direction when the specimens were measured at random in simulated standing or sitting positions in groups. The horizontal displacement and longitudinal displacement of the acetabular fractures in the quadrilateral area were measured in both the standing and sitting simulations. RESULTS: As the load increased, no dislocation or internal fixation breakage occurred during the measurements. In the standing position, the horizontal displacement of the quadrilateral area fractures in group A and group B appeared to be less than 1 mm with loads ranging from 400 N to 700 N, and there was no significant difference between group A and group B (p > 0.05). The longitudinal displacement appeared to be greater than 1 mm with a load of 700 mm in group A (700 N, 2 cases), and the difference was significant between group A and group B (p < 0.05). In the sitting position, the horizontal and longitudinal displacements of the quadrilateral areas were within 0.5 mm in group A and group B, and there was no significant difference between group A and group B (p > 0.05). CONCLUSION: For complex acetabular fractures in the quadrilateral area, DAPSQ fixation may provide early sitting stability, but it is inappropriate for patients to stand too early.
Subject(s)
Acetabulum , Bone Plates , Bone Screws , Fracture Fixation, Internal , Fractures, Bone , Titanium , Humans , Acetabulum/surgery , Acetabulum/injuries , Biomechanical Phenomena , Fracture Fixation, Internal/instrumentation , Fracture Fixation, Internal/methods , Adult , Middle Aged , Fractures, Bone/surgery , Fractures, Bone/physiopathology , Male , Female , CadaverABSTRACT
Lateral plating alone has been postulated as an alternative for fixation of bicondylar tibial plateau fractures in attempts to limit morbidity associated with dual plating. Characterization of fracture patterns that may facilitate lateral plating alone for bicondylar tibial plateau fractures is not well established. The authors analyzed radiographic and clinical outcomes of isolated lateral plating in patients with at least 6 months of follow-up. Of 56 patients identified, 37 (66%) had 41 AO Foundation (AO)/Orthopaedic Trauma Association (OTA) C1/C2 fractures with 19 (34%) presenting with 41 C3 fractures. Mean posteromedial articular fracture angle (PMAFA) was 69.9 degrees, with an average of 1.3 medial articular fragments. Only 16 patients (28%) had a PMAFA under 45 degrees. There were no cases of nonunion, and five patients (8.9%) developed wound infection during follow-up. Four patients (7.1%) experienced malreduction over three degrees, and eight patients (14.3%) experienced change in alignment over the follow-up duration, indicating some risk of inadequate fixation with this technique. (Journal of Surgical Orthopaedic Advances 33(2):088-092, 2024).
Subject(s)
Bone Plates , Fracture Fixation, Internal , Tibial Fractures , Humans , Tibial Fractures/surgery , Tibial Fractures/diagnostic imaging , Fracture Fixation, Internal/methods , Male , Female , Middle Aged , Adult , Aged , Retrospective Studies , Clinical Decision-Making , Young Adult , Radiography , Tibial Plateau FracturesABSTRACT
VIDEO AVAILABLE AT: https://ota.org/education/ota-online-resources/video-library-procedures-techniques/distal-clavicle-fracture-repair.