History of internal fixation (part 1): early developments with wires and plates before World War II.

Though the date at which an orthopaedic implant was first used cannot be ascertained with any certainty, the fixation of bone fracture using an iron wire was reported for the first time in a French manuscript in 1775. The first techniques of operative fracture treatment were developed at the end of the 18th and in the beginning of the 19th centuries. The use of cerclage wires to fix fractures was the most frequent fixation at this time. The French Berenger-Feraud (1832-1900) had written the first book on internal fixation. However internal fixation of fractures could not become a practical method before Lister had ensured the safety of open reduction and internal fixation in the treatment of fractures. Lister is not only the father of asepsis; he also used metal wires to fix even closed fractures. The first internal fixation by means of a plate and screws was described by Carl Hansmann in 1858 in Hamburg. Nevertheless, Arbuthnot Lane (1892) and Albin Lambotte (1905) are considered to be the founders of this method, which was further developed by Sherman in the first part of the 20th century.

Wiring of patellar fractures by Joseph Lister.

Joseph Lister (1827-1912) was the father of modern surgery and, in particular, of today's orthopaedic surgery. Before Lister, surgeons seldom opened into a joint or performed an open operation for failed reduction or malunion of a fracture. Indeed, most surgical teachers condemned such procedures because of the almost invariable complications of wound suppuration, pyaemia prolonged illness and often death.

One century of Kirschner wires and Kirschner wire insertion techniques: a historical review.

A century ago, in 1909, Martin Kirschner (1879-1942) introduced a smooth pin, presently known as the Kirschner wire (K-wire). The K-wire was initially used for skeletal traction and is now currently used for many different goals. The development of the K-wire and its insertion devices were mainly influenced by the change in operative goals and by the introduction of antibiotics. The first versions of the Kirschner wire were hammered through a predrilled hole into the bone, but later on drilling became the standard technique of insertion. Drilling is considered a simple way of implanting, with many advantages, such as percutaneous and atraumatic insertion. However, this technique also has its disadvantages like temperature elevation, resulting in osteonecrosis and heat-related complications. Despite these complications the K-wire is now standard for the treatment of hand fractures, worldwide.

The evolution of posterior cervical and occipitocervical fusion and instrumentation.

The past several decades have been the setting for a remarkable evolution of spinal instrumentation technology. The advancements that have been made have allowed previously complex disorders of the cervical spine, the atlantoaxial articulation, and the occipitocervical junction to be managed more effectively with direct methods of internal fixation and arthrodesis. This has resulted in improvements in patient outcomes and fusion success rates. The improved strength of instrumentation constructs allows minimal, if any, external bracing, obviating the need for a halo orthosis in many cases. In this paper the authors review key events that have occurred in neuroimaging, biomechanical testing, and the development of fusion and instrumentation constructs.

History of instrumentation for stabilization of the subaxial cervical spine.

In the past several decades methods have been developed to stabilize the subaxial cervical spine both posteriorly and anteriorly. Methods of posterior stabilization have progressed from interspinous wiring, through facet wiring and sublaminar wiring, to the lateral mass screws with plates and rods that are in use today. Plates for anterior stabilization have evolved from rigid plates requiring bicortical screws through those used with unicortical locking screws, to dynamic load-sharing plates used with variable angle screws. The original description of spinous process wiring was published by Hadra in 1891. In 1942 Rogers described the interspinous wiring method used for trauma-induced cervical instability, which was modified by Bohlman in 1985 (triple wiring technique). Luque rods with sublaminar wires were introduced in the late 1970s to address multilevel and occipitocervical instability. Facet wiring was developed in 1977 by Callahan to address the problem of stabilization when laminae are not present. Wiring remained the method used until Roy-Camille introduced the lateral mass screw-plate construct in the 1980s. The first plate for anterior stabilization was designed by Orozco and Llovet in 1970 and was later refined by Caspar; this was a rigid plate with bicortical screws. Morscher devised unicortical locking screws in the 1980s. The latest concept of dynamic load-sharing plates with variable angle screws was developed in 2000. In this article historical landmarks in surgical methods for the stabilization of the subaxial cervical spine are reviewed.