Bioavailability assessment of a brompheniramine taste-masked pediatric formulation in a juvenile porcine model.

A brompheniramine taste-masked pediatric formulation was developed as part of the National Institutes of Health Pediatric Formulation Initiative to help address low patient compliance caused by the bitter taste of many adult formulations. To confirm that the taste-masked formulation can provide a similar pharmacological effect to the previous marketed adult formulations, a juvenile porcine model was used to screen the model pediatric formulation to compare the bioavailability between the marketed brompheniramine maleate and the taste-masked maleate/tannate formulation. Pigs were dosed orally with both formulations and blood samples were obtained from 0 to 48 h. Plasma samples were prepared and extracted using solid-phase extraction. The mass spectrometer was operated under selected ion monitoring mode. The selected ion monitoring channels were set to m/z 319.1 for brompheniramine and m/z 275.2 for the internal standard chlorpheniramine. Calibration curves were linear over the analytical range 0.2-20 ng/ml (r2 > 0.995) for brompheniramine in plasma. The intra- and inter-day accuracies were between 98.0 and 105% with 5.73% RSD precision. The bioanalytical method was successfully applied to a preclinical bioavailability study. The bioavailability profiles were not significantly different between the two formulations, which demonstrates that taste-masking with tannic acid is a promising approach for formulation modification for pediatric patients.

Hydroxypropyl ß-cyclodextrin nanohybrid monoliths for use in capillary electrochromatography with UV detection: application to the enantiomeric separation of adrenergic drugs, anticholinergic drugs, antidepressants, azoles, and antihistamine.

Two kinds of hydroxypropyl ß-cyclodextrin nanohybrid monoliths were synthesized and applied in capillary electrochromatography with UV detection. One column was fabricated by concurrently using glycidyl methacrylate-bonded hydroxypropyl ß-cyclodextrin (GMA-HP-ß-CD), sodium 3-mercaptopropanesulphonate, and alkoxysilanes in the "one-pot" process. The other was prepared by free radical polymerization of GMA-HP-ß-CD, vinylmethylcyclosiloxane, ethylene dimethacrylate, and 2-acrylamido-2-methyl propane sulfonic acid. Compared to the former hybrid monolith, the latter one displayed improved enantiomeric separation. For ten adrenergic drugs, six anticholinergic drugs, two antidepressants, six azoles, and one antihistamine enantiomeric separation was obtained on the monolith synthesized by free radical polymerization. Twelve out of twenty-five drugs were baseline-separated. Especially, anisodamine with two chiral centers was successfully separated with resolution values of 3.06, 2.11, and 2.17. The nanohybrid monoliths were characterized by optical microscopy, scanning electron microscopy, FT-IR, nitrogen adsorption analysis, and thermogravimetric analysis. Relative standard deviation values less than 5% were obtained through run-to-run, day-to-day, and column-to-column investigations (n = 3). Graphical abstract Schematic representation of two kinds of hydroxypropyl ß-cyclodextrin nanohybrid monoliths based on "one-pot" approach (route I) and free radical polymerization approach (route II), respectively.

In situ immobilization of sulfated-ß-cyclodextrin as stationary phase for capillary electrochromatography enantioseparation.

In this work, a novel sulfated-ß-cyclodextrin (S-ß-CD) coated stationary phase was prepared for open-tubular capillary electrochromatography (OT-CEC). The capillary was developed by attaching polydopamine/sulfated-ß-cyclodextrin (PDA/S-ß-CD) onto the gold nanoparticles (AuNPs) coated capillary which was pretreated with polydopamine. The results of scanning electron microscopy (SEM) and energy dispersive X-ray analysis spectroscopy (EDS) indicated that polydopamine/sulfated-ß-cyclodextrin was successfully fixed on the gold nanoparticles coated capillary. To evaluate the performance of the prepared open tubular (OT) column, the enantioseparation was carried out by using ten chiral drugs as model analytes. Under the optimal conditions, salbutamol, terbutaline, trantinterol, tulobuterol, clorprenaline, pheniramine, chlorpheniramine, brompheniramine, isoprenaline and tolterodine were baseline separated with the resolution (Rs) values of 3.25, 1.76, 2.51, 1.89, 3.17, 2.17, 1.99, 1.72, 2.01 and 3.20, respectively. Repeatability of the column was studied, with the relative standard deviations for run-to-run, day-to-day and column-to-column lower than 5.7%.

Reduction of interferences in the analysis of Children's Dimetapp using ultraviolet spectroscopy data and target factor analysis.

A calibration matrix has been developed and successfully applied to quantify actives in Children's Dimetapp®, a cough mixture whose active components suffer from heavy spectral interference. High-performance liquid chromatography/photodiode array instrument was used to identify the actives and any other UV-detectable excipients that might contribute to interferences. The instrument was also used to obtain reference data on the actives, instead of relying on the manufacturer's claims. Principal component analysis was used during the developmental stages of the calibration matrix to highlight any mismatch between the calibration and sample spectra, making certain that "apples" were not compared with "oranges". The prediction model was finally calculated using target factor analysis and partial least squares regression. In addition to the actives in Children's Dimetapp® (brompheniramine maleate, phenylephrine hydrogen chloride, and dextromethorphan hydrogen bromide), sodium benzoate was identified as the major and FD&C Blue #1, FD&C Red #40, and methyl anthranilate as minor spectral interferences. Model predictions were compared before and after the interferences were included into the calibration matrix. Before including interferences, the following results were obtained: brompheniramine maleate=481.3mgL-1±134% RE; phenylephrine hydrogen chloride=1041mgL-1±107% RE; dextromethorphan hydrogen bromide=1571mgL-1±107% RE, where % RE=percent relative error based on the reference HPLC data. After including interferences, the results were as follows: brompheniramine maleate=196.3mgL-1±4.4% RE; phenylephrine hydrogen chloride=501.3mgL-1±0.10% RE; dextromethorphan hydrogen bromide=998.7mgL-1±1.6% RE as detailed in Table 6.

Brompheniramine as a novel probe for indirect UV detection and its application for the capillary electrophoresis of adamantane drugs.

Brompheniramine, an antihistamine drug, was employed as a novel UV probe for capillary electrophoresis with indirect UV detection of adamantane drugs (memantine, amantadine, and rimantadine). The probe possesses high molar absorptivity of 24 × 103 L/mol cm at 6 mM, which enables the measurement of these nonchromophore analytes without derivatization. The simple background electrolyte (10 mM sodium dihydrogen phosphate (pH 5.0) containing 5 mM brompheniramine and 6 mM ß-cyclodextrin) provided the separation of the analytes in a short time (7.5 min). Under these conditions, brompheniramine had similar mobility to that of the analyte ions resulting in symmetric peaks with minimal electrodispersion. The analytes displace the probe at a one-to-one ratio with transfer values close to unity. ß-Cyclodextrin played a role in the resolution of the structurally similar adamantane derivatives. Method validation showed good linearity (r2  > 0.98), precision (%RSD ≤ 3.30), and accuracy (recoveries ranging from 98 to 109%). The proposed method was successfully applied to determine the adamantane content in pharmaceutical products.

Chiral separation of brompheniramine enantiomers by recycling high-speed countercurrent chromatography using carboxymethyl-ß-cyclodextrin as a chiral selector.

A recycling high-speed countercurrent chromatography protocol was proposed for the enantioseparation of brompheniramine by employing ß-cyclodextrin derivatives as a chiral selector. The two-phase solvent system of n-hexane/isobutyl acetate/0.10 mol/L phosphate buffer solution with a volume ratio of 2:4:6 was selected by a series of extraction experiments. Factors that affected the distribution of the enantiomers over the two-phase system (e.g., the type and concentration of ß-cyclodextrin derivatives = pH value of the aqueous solution, and the separation temperature) were also investigated. In addition, the theory of thermodynamics is applied to verify the feasibility of the enantioseparation process and the corresponding results demonstrate that this separation process is feasible. The optimized conditions include carboxymethyl-ß-cyclodextrin concentration of 0.010 mol/L, pH of 7.5, and temperature of 5°C. Under the optimal conditions, the purities of both monomer molecules were over 99%, and the recovery yields were 88% for (+)-brompheniramine and 85% for (-)-brompheniramine, respectively.

Capillary electrophoretic enantioseparation of basic drugs using a new single-isomer cyclodextrin derivative and theoretical study of the chiral recognition mechanism.

A novel single-isomer cyclodextrin derivative, heptakis {2,6-di-O-[3-(1,3-dicarboxyl propylamino)-2-hydroxypropyl]}-ß-cyclodextrin (glutamic acid-ß-cyclodextrin) was synthesized and used as a chiral selector in capillary electrophoresis for the enantioseparation of 12 basic drugs, including terbutaline, clorprenaline, tulobuterol, clenbuterol, procaterol, carvedilol, econazole, miconazole, homatropine methyl bromide, brompheniramine, chlorpheniramine and pheniramine. The primary factors affecting separation efficiency, which include the background electrolyte pH, the concentration of glutamic acid-ß-cyclodextrin and phosphate buffer concentration, were investigated. Satisfactory enantioseparations were obtained using an uncoated fused-silica capillary of 50 cm (effective length 40 cm) × 50 µm id with 120 mM phosphate buffer (pH 2.5-4.0) containing 0.5-4.5 mM glutamic acid-ß-cyclodextrin as background electrolyte. A voltage of 20 kV was applied and the capillary temperature was kept at 20°C. The results proved that glutamic acid-ß-cyclodextrin was an effective chiral selector for studied 12 basic drugs. Moreover, the possible chiral recognition mechanism of brompheniramine, chlorpheniramine and pheniramine on glutamic acid-ß-cyclodextrin was investigated using the semi-empirical Parametric Method 3.

Preparation of a ß-Cyclodextrin-Based Open-Tubular Capillary Electrochromatography Column and Application for Enantioseparations of Ten Basic Drugs.

An open-tubular capillary electrochromatography column was prepared by chemically immobilized ß-cyclodextrin modified gold nanoparticles onto new surface with the prederivatization of (3-mercaptopropyl)-trimethoxysilane. The synthesized nanoparticles and the prepared column were characterized by transmission electron microscopy, scanning electron microscopy, infrared spectroscopy and ultraviolet visible spectroscopy. When the column was employed as the chiral stationary phase, no enantioselectivity was observed for ten model basic drugs. So ß-cyclodextrin was added to the background electrolyte as chiral additive to expect a possible synergistic effect occurring and resulting in a better separation. Fortunately, significant improvement in enantioselectivity was obtained for ten pairs of drug enantiomers. Then, the effects of ß-cyclodextrin concentration and background electrolyte pH on the chiral separation were investigated. With the developed separation mode, all the enantiomers (except for venlafaxine) were baseline separated in resolutions of 4.49, 1.68, 1.88, 1.57, 2.52, 2.33, 3.24, 1.63 and 3.90 for zopiclone, chlorphenamine maleate, brompheniramine maleate, dioxopromethazine hydrochloride, carvedilol, homatropine hydrobromide, homatropine methylbromide, venlafaxine, sibutramine hydrochloride and terbutaline sulfate, respectively. Further, the possible separation mechanism involved was discussed.

Contact allergens in oral antihistamines.

BACKGROUND: Excipients in various formulations of active drugs occasionally include known contact allergens. Their ingestion may trigger dermatitis or cause it to become widespread or refractory to therapy. OBJECTIVE: The aim of this study was to investigate the prevalence of common contact allergens among the excipients of oral antihistamines available in this country. METHODS: We gathered the complete ingredient lists of 2119 different preparations of 12 oral antihistamines from the National Library of Medicine data bank and entered them into an electronic database for analysis. RESULTS: More than half the formulations (55.0%) contained at least 1 member of the 10 allergen families assessed. Most brompheniramine and doxepin preparations included potentially allergenic excipients, whereas fexofenadine was most often free of them. Sorbitan group members, azo dyes, and propylene glycol were the allergens found most frequently in the antihistamines, each present in over 25% of the products. Elixirs, liquids, solutions, suspensions, and syrups were more likely than nonchewable caplets, capsules, and tablets to contain the allergens tabulated (100% vs 39.3%, respectively). Chewable pills frequently contained azo dyes. CONCLUSIONS: Ingestion of antihistamines could precipitate a systemic contact dermatitis in a patient sensitized to an allergen present as an excipient in the medicine.

An expanded cellular automata model for enantiomer separations using a ß-cyclodextrin stationary phase.

Chromatographic scale enantiomer separation has not been modeled using cellular automata (CA). CA uses easy to adjust equations to different enantiomers under various chromatographic conditions. Previous work has demonstrated that CA modeling can accurately predict the strength of one-to-one binding interactions between enantiomers and ß-cyclodextrin (CD) [1]. In this work, the model is expanded to a chromatographic scale grid environment in order to transform model output into HPLC chromatograms. The model accurately predicted the lack of chromatographic selectivity of mandelic enantiomers (1.05 published, 1.01 modeled) and the separation of brompheniramine enantiomers (1.13 published, 1.12 modeled) previously modeled in one-to-one interactions. By examining cyclohexylphenylglycolic acid (CHPGA) enantiomers, the model accurately predicted both the selectivity and resolution of the enantiomer peaks at varying chromatographic temperatures. Modeled changes in mobile phase pH agree with laboratory outcomes when examining peak resolution and selectivity. Changes in injection volume resulted in an increase in retention time of the modeled enantiomers as was observed in the published laboratory results.

Cross-sectional microhardness of bovine enamel subjected to three paediatric liquid oral medicines: an in vitro study.

AIM: This study aimed to investigate the in vitro effects of three paediatric liquid oral medicines on bovine dental enamel subsurfaces under pH cycling conditions. METHODS: Bovine enamel blocks were evaluated for surface hardness at baseline for sample selection. 52 intact bovine enamel blocks (16mm(2)) were randomly divided into four groups (n=13) according to the immersion treatments: G1: antibiotic (Klaricid®), G2: antihistamine (Claritin®), G3: antihistamine (Dimetapp®) and G4: control (de-ionised water). The blocks were submitted to pH cycling treatments twice a day for 12 days. The medicines were evaluated for pH, viscosity, and concentration of calcium, phosphate and fluoride. After the treatment period, cross-sectional microhardness (CSMH) measurements of the enamel blocks were taken and the data, expressed in Knoop hardness number (kg/mm(2)) was used to calculate the ΔS. STATISTICS: ANOVA followed by the Tukey test were used for statistical analyses (p<0.05). RESULTS: The antibiotic Klaricid® showed the highest concentration of fluoride, calcium and phosphate. Considering pH and viscosity, the following pattern was observed according to the treatment group: G4>G1>G2>G3 and G1>G2>G3>G4 respectively. Regarding the demineralisation pattern, the following results were observed: G4>G3>G2>G1. Compared to the control, the antibiotic and both the antihistamines provoked less demineralisation of the enamel blocks (p<0.05). CONCLUSIONS: Antibiotic G1 (Klaricid®) presented an in vitro protective effect against acid attacks probably due to its mineral content and viscosity.

Complementary fluorescence and phosphorescence study of the interaction of brompheniramine with human serum albumin.

Binding of the antihistamine drug brompheniramine (BPA) to human serum albumin (HSA) is studied by measuring quenching of the fluorescence and room temperature phosphorescence (RTP) of tryptophan. The modified Stern-Volmer equation was used to derive association constants and accessible fractions from the steady-state fluorescence data. Decay associated spectra (DAS) revealed three tryptophan fluorescence lifetimes, indicating the presence of three HSA conformations. BPA causes mainly static quenching of the long-living, solvent-exposed conformer. RTP spectra and lifetimes, recorded under deoxygenated conditions in the presence of 0.2 M KI, provided additional kinetic information about the HSA-BPA interactions. Fluorescence DAS that were also recorded in the presence of 0.2 M KI revealed that the solvent-exposed conformer is the major contributor to the RTP signal. The phosphorescence quenching is mostly dynamic at pH 7 and mostly static at pH 9, presumably related to the protonation state of the alkylamino chain of BPA. This provides direct insight into the binding mode of the antihistamine drug, as well as kinetic information at both the nanosecond and the millisecond time scales.

pH-dependent complexation of histamine H1 receptor antagonists and human serum albumin studied by UV resonance Raman spectroscopy.

UV resonance Raman spectroscopy was used to characterize the binding of three first-generation histamine H(1) receptor antagonists-tripelennamine (TRP), mepyramine (MEP), and brompheniramine (BPA)-to human serum albumin (HSA) at pH 7.2 and pH 9.0. Binding constants differ at these pH values, which can be ascribed to the different extent of protonation of the ethylamino side chain of the ligands. We have recently shown [Tardioli et al. J. Raman Spectrosc. 2011, 42, 1016-1024] that for the solution conformation of TRP and MEP the side chain plays an important role by allowing an internal hydrogen bond with the aminopyridine nitrogen in TRP and MEP. Results presented in this paper suggest that the existence of such molecular structures has serious biological significance on the binding affinity of those ligands to HSA. At pH 7.2, only the stretched conformers of protonated TRP and MEP bind in HSA binding site I. Using UV absorption data, we derived binding constants for the neutral and protonated forms of TRP to HSA. The neutral species seems to be conjugated to a positive group of the protein, affecting both the tryptophan W214 and some of the tyrosine (Y) vibrations. BPA, for which the structure with an intramolecular hydrogen bonded side chain is not possible, is H bound to the indole ring nitrogen of W214, of which the side chain rotates over a certain angle to accommodate the drug in site I. We propose that the protonated BPA is also bound in site I, where the Y150 residue stabilizes the presence of this compound in the binding pocket. No spectroscopic evidence was found for conformational changes of the protein affecting the spectroscopic properties of W and Y in this pH range.

Chemometric evaluation of brompheniramine-tannate complexes.

The objective of the current study was to evaluate the performance of Raman and near-infrared (NIR) techniques combined with chemometrics in characterizing the critical quality attributes of brompheniramine (BP)-tannate complexes. Seven complexes were prepared and evaluated for chemical interactions, solubilities, dissolutions, and spatial distributions by NIR chemical imaging (CI). Principal component analysis (PCA) was applied before either partial least squares regression (PLSR) or principal component regression (PCR) models were developed. Complexation was confirmed by Fourier transform IR analysis to yield complexes of lower drug solubilities and sustained-release characteristics in alkaline media. PCA results showed better discrimination ability by NIR than by Raman spectroscopy. Compared with PCR, the PLSR predictions errors, calculated from the Raman and NIR data with second-derivative pretreatment, showed lesser values of 2.68, 0.37, 1.79, and 5.60 and 0.58, 0.25, 0.93, and 0.58 for complex solubilities in acidic and alkaline media and percentages dissolved after 1 and 20 h, respectively. In addition, good correlation (>0.95) was obtained for predicting the drug concentration using PLSR score images explaining the validity of the NIR-CI model for spatial quantitation of BP within its tannate complexes. In conclusion, the chemometric analysis of NIR and/or Raman spectra represented an innovative approach to determine the tannate complexation variability.

Tannate complexes of antihistaminic drug: sustained release and taste masking approaches.

The aim of this investigation was to evaluate the complexation potential of brompheniramine maleate (BPM) and tannic acid (TA) for sustained release and taste masking effects. The complexes (1:1-1:7 TA to BPM ratio) were prepared by the solvent evaporation method using methanol, phosphate buffer pH 6.8 or 0.1N HCl as common solvents. The complexes were characterized microscopically by scanning electron microscopy (SEM), chemically by Fourier transform infrared (FTIR) and solid-state NMR (SSNMR), thermally by differential scanning calorimetry (DSC), for crystallinity by powder X-ray powder diffraction (PXRD), for organoleptic evaluation by electronic tongue (e-tongue), and for solubility in 0.1N HCl and phosphate buffer pH 6.8. The dissolution studies were carried out using the USP II method at 50 rpm in 500 ml of dissolution media (0.1N HCl or phosphate buffer pH 6.8). SEM images revealed that the morphology of complexes were completely different from the individual components, and all complexes had the same morphological characteristics, irrespective of the solvent used for their preparation, pH or ratio of BPM and TA. The FTIR spectra showed the presence of chemical interactions between the TA and BPM. DSC, PXRD and SSNMR indicated that the drug lost its crystalline nature by formation of the complex. Complexation has significantly reduced the solubility of BPM and sustained the drug release up to 24h in phosphate buffer pH 6.8 media. The bitter taste of the BPM was completely masked which was indicated by Euclidean distance values which was far from the drug but near to its placebo in the complexes in all ratios studied. The taste masked complexes can be potentially developed as suitable dosage forms for pediatric use. In summary, complexation of BPM and TA effectively sustained the dissolution and masked the bitter taste of drug for the development of suitable dosage forms for pediatric use.

Synthesis of imprinted beads by aqueous suspension polymerisation for chiral recognition of antihistamines.

A novel non-stabilised aqueous suspension polymerisation methodology for the preparation of spherical molecularly imprinted polymers is described with chlorpheniramine (CP), d-chlorpheniramine (d-CP), brompheniramine (BP) and d-brompheniramine (d-BP) as the templates, respectively. Using this rapid and simple technique, controlled polymer beads in the low micron range with narrow size distributions were generated by photo-polymerisation. The use of agitation speed as a method of controlling bead size distribution was demonstrated. Enantioselective properties of the imprinted beads were examined and the polymers prepared using d-chlorpheniramine and d-brompheniramine were capable of discriminating between the enantiomers of the template. Cross-selectivity studies were performed by batch rebinding with the influence of template size and functional group orientation of analytes on the recognition properties of the imprinted polymers investigated. Physical characteristics of all polymers were studied by nitrogen sorption porosimetry, particle size analysis and scanning electron microscopy (SEM) in order to gain an insight into the role of such properties on retention behaviour.

In vitro alterations in dental enamel exposed to acidic medicines.

OBJECTIVE: To evaluate the effect of acidic medicines (Klaricid(®), Claritin(®), and Dimetapp(®)) on surface enamel in vitro. METHODS: Enamel blocks (n=104) were randomly distributed into two groups: G1 (pH-cycling simulating physiological oral conditions) and G2 (erosive conditions). Each group was divided into four subgroups, three to be immersed in the medicines and the control in deionized water. Specimen surfaces were evaluated for roughness and hardness at baseline and again after the in vitro experimental phase, which included 30 min immersions in the medicines twice daily for 12 days. Scanning electron microscopy (SEM) was also performed after the in vitro experimental phase. RESULTS: All medicines produced a significant reduction in hardness in G1 after 12 days (P<0.05). The three medicines promoted greater roughness after both pH-regimens - G1 and G2 (P<0.01), except for Claritin in G1. Scanning electron microscopy analysis showed erosive patterns in all subgroups. Dimetapp(®) showed the most erosion and Klaricid(®) the least, in both groups. CONCLUSION: Dimetapp(®) (lowest pH and viscosity) and deionized water (control) showed the most pronounced erosive patterns. Klaricid(®) (highest pH and viscosity) presented an in vitro protective effect against acid attacks perhaps due to its mineral content and viscosity.

Halogenation effects of pheniramines on the complexation with beta-cyclodextrin.

This study investigated the inclusion complexes of beta-cyclodextrin with pheniramine and its halogenated derivatives chlorpheniramine and brompheniramine both experimentally and theoretically to characterize the effects of a halogenated phenyl ring on the intermolecular interactions. Fourier transform infrared and nuclear magnetic resonance (NMR) experiments provided evidence of the formation of inclusion complexes and NMR were conducted to evaluate the apparent binding constants. The two-layered hybrid ONIOM method, ONIOM(B3LYP/6-31G(d):PM3), was adopted to optimize the geometry. The linear relationships between the calculated and experimental values for frequencies (with a scaling factor of 0.96) and for magnetic properties (with a scaling factor of 1.05) demonstrate that the quantum chemical calculations were consistent with the experimental spectra. Additionally, the calculated binding energies were consistent with the experimental results: the stability order of the complexes and the trend of the binding energy is: brompheniramine>chlorpheniramine>pheniramine; S-enantiomer>R-enantiomer. Natural Bond Orbital analysis further demonstrated three major electronic delocalizations--from the substituent on the phenyl moiety of pheniramine to beta-CD and from beta-CD to the phenyl and amine moieties in pheniramine--which were the dominant intermolecular forces that were responsible for the substantially different binding strengths. Geometrical data and the partial charge distribution obtained by NBO analysis are provided as supplementary data.

Surface degradation of composite resins by acidic medicines and pH-cycling.

This study evaluated the effects of acidic medicines (Dimetapp and Claritin), under pH-cycling conditions, on the surface degradation of four composite resins (microhybrid: TPH, Concept, Opallis and Nanofilled: Supreme). Thirty disc-shaped specimens ([symbol: see text] = 5.0 mm/thickness = 2.0 mm) of each composite were randomly assigned to 3 groups (n = 10): a control and two experimental groups, according to the acidic medicines evaluated. The specimens were finished and polished with aluminum oxide discs, and the surface roughness was measured by using a profilometer. After the specimens were submitted to a pH-cycling regimen and immersion in acidic medicines for 12 days, the surface roughness was measured again. Two specimens for each material and group were analyzed by scanning electron microscopy (SEM) before and after pH-cycling. Data were analyzed by the Student's-t test, ANOVA, Duncan's multiple range test and paired t-test (alpha=0.05). Significant increase in roughness was found only for TPH in the control group and TPH and Supreme immersed in Claritin (p<0.05). SEM analyses showed that the 4 composite resins underwent erosion and surface degradation after being subjected to the experimental conditions. In conclusion, although the roughness was slightly affected, the pH-cycling and acidic medicines caused surface degradation of the composite resins evaluated. Titratable acidity seemed to play a more crucial role on surface degradation of composite resins than pH.

Surface degradation of composite resins by acidic medicines and ph-cycling

This study evaluated the effects of acidic medicines (Dimetapp® and Claritin®), under pH-cycling conditions, on the surface degradation of four composite resins (microhybrid: TPH, Concept, Opallis and Nanofilled: Supreme). Thirty disc-shaped specimens (Ø = 5.0 mm / thickness = 2.0 mm) of each composite were randomly assigned to 3 groups (n = 10): a control and two experimental groups, according to the acidic medicines evaluated. The specimens were finished and polished with aluminum oxide discs, and the surface roughness was measured by using a profilometer. After the specimens were submitted to a pH-cycling regimen and immersion in acidic medicines for 12 days, the surface roughness was measured again. Two specimens for each material and group were analyzed by scanning electron microscopy (SEM) before and after pH-cycling. Data were analyzed by the Student's-t test, ANOVA, Duncan's multiple range test and paired t-test (α=0.05). Significant increase in roughness was found only for TPH in the control group and TPH and Supreme immersed in Claritin® (p<0.05). SEM analyses showed that the 4 composite resins underwent erosion and surface degradation after being subjected to the experimental conditions. In conclusion, although the roughness was slightly affected, the pH-cycling and acidic medicines caused surface degradation of the composite resins evaluated. Titratable acidity seemed to play a more crucial role on surface degradation of composite resins than pH.