Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 49.101
Filter
1.
Am J Bioeth ; 24(6): 16-26, 2024 Jun.
Article in English | MEDLINE | ID: mdl-38829597

ABSTRACT

Donation after circulatory determination of death (DCDD) is an accepted practice in the United States, but heart procurement under these circumstances has been debated. Although the practice is experiencing a resurgence due to the recently completed trials using ex vivo perfusion systems, interest in thoracoabdominal normothermic regional perfusion (TA-NRP), wherein the organs are reanimated in situ prior to procurement, has raised many ethical questions. We outline practical, ethical, and equity considerations to ensure transplant programs make well-informed decisions about TA-NRP. We present a multidisciplinary analysis of the relevant ethical issues arising from DCDD-NRP heart procurement, including application of the Dead Donor Rule and the Uniform Definition of Death Act, and provide recommendations to facilitate ethical analysis and input from all interested parties. We also recommend informed consent, as distinct from typical "authorization," for cadaveric organ donation using TA-NRP.


Subject(s)
Heart Transplantation , Perfusion , Tissue and Organ Procurement , Humans , Heart Transplantation/ethics , Tissue and Organ Procurement/ethics , Organ Preservation/ethics , United States , Tissue Donors/ethics , Informed Consent/ethics , Death , Cadaver
2.
World J Surg Oncol ; 22(1): 147, 2024 Jun 03.
Article in English | MEDLINE | ID: mdl-38831328

ABSTRACT

BACKGROUND: Radio(chemo)therapy is often required in pelvic malignancies (cancer of the anus, rectum, cervix). Direct irradiation adversely affects ovarian and endometrial function, compromising the fertility of women. While ovarian transposition is an established method to move the ovaries away from the radiation field, surgical procedures to displace the uterus are investigational. This study demonstrates the surgical options for uterine displacement in relation to the radiation dose received.  METHODS: The uterine displacement techniques were carried out sequentially in a human female cadaver to demonstrate each procedure step by step and assess the uterine positions with dosimetric CT scans in a hybrid operating room. Two treatment plans (anal and rectal cancer) were simulated on each of the four dosimetric scans (1. anatomical position, 2. uterine suspension of the round ligaments to the abdominal wall 3. ventrofixation of the uterine fundus at the umbilical level, 4. uterine transposition). Treatments were planned on Eclipse® System (Varian Medical Systems®,USA) using Volumetric Modulated Arc Therapy. Data about maximum (Dmax) and mean (Dmean) radiation dose received and the volume receiving 14 Gy (V14Gy) were collected. RESULTS: All procedures were completed without technical complications. In the rectal cancer simulation with delivery of 50 Gy to the tumor, Dmax, Dmean and V14Gy to the uterus were respectively 52,8 Gy, 34,3 Gy and 30,5cc (1), 31,8 Gy, 20,2 Gy and 22.0cc (2), 24,4 Gy, 6,8 Gy and 5,5cc (3), 1,8 Gy, 0,6 Gy and 0,0cc (4). For anal cancer, delivering 64 Gy to the tumor respectively 46,7 Gy, 34,8 Gy and 31,3cc (1), 34,3 Gy, 20,0 Gy and 21,5cc (2), 21,8 Gy, 5,9 Gy and 2,6cc (3), 1,4 Gy, 0,7 Gy and 0,0cc (4). CONCLUSIONS: The feasibility of several uterine displacement procedures was safely demonstrated. Increasing distance to the radiation field requires more complex surgical interventions to minimize radiation exposure. Surgical strategy needs to be tailored to the multidisciplinary treatment plan, and uterine transposition is the most technically complex with the least dose received.


Subject(s)
Cadaver , Fertility Preservation , Pelvic Neoplasms , Radiotherapy Dosage , Radiotherapy Planning, Computer-Assisted , Radiotherapy, Intensity-Modulated , Uterus , Humans , Female , Radiotherapy Planning, Computer-Assisted/methods , Fertility Preservation/methods , Uterus/radiation effects , Uterus/surgery , Uterus/pathology , Pelvic Neoplasms/radiotherapy , Pelvic Neoplasms/surgery , Pelvic Neoplasms/pathology , Radiotherapy, Intensity-Modulated/methods , Organ Sparing Treatments/methods , Organs at Risk/radiation effects , Prognosis , Radiometry/methods
3.
Arq Bras Cir Dig ; 37: e1800, 2024.
Article in English | MEDLINE | ID: mdl-38716920

ABSTRACT

BACKGROUND: One of the primary complications associated with large incisions in abdominal surgery is the increased risk of fascial closure rupture and incisional hernia development. The choice of the fascial closure method and closing with minimal tension and trauma is crucial for optimal results, emphasizing the importance of uniform pressure along the suture line to withstand intra-abdominal pressure. AIMS: To evaluate the resistance to pressure and tension of stapled and sutured hand-sewn fascial closure in the abdominal wall. METHODS: Nine abdominal wall flaps from human cadavers and 12 pigs were used for the experimentation. An abdominal defect was induced after the resection of the abdominal wall and the creation of a flap in the cadaveric model and after performing a midline incision in the porcine models. The models were randomized into three groups. Group 1 was treated with a one-layer hand-sewn small bite suture, Group 2 was treated with a two-layer hand-sewn small bite suture, and Group 3 was treated with a two-layer stapled closure. Tension measurements were assessed in cadaveric models, and intra-abdominal pressure was measured in porcine models. RESULTS: In the human cadaveric model, the median threshold for fascial rupture was 300N (300-350) in Group 1, 400N (350-500) in Group 2, and 350N (300-380) in Group 3. Statistical comparisons revealed non-significant differences between Group 1 and Group 2 (p=0.072, p>0.05), Group 1 and Group 3 (p=0.346, p>0.05), and Group 2 and Group 3 (p=0.184, p>0.05). For porcine subjects, Group 1 showed a median pressure of 80 mmHg (85-105), Group 2 had a median of 92.5 mmHg (65-95), and Group 3 had a median of 102.5 mmHg (80-135). Statistical comparisons indicated non-significant differences between Group 1 and Group 2 (p=0.243, p>0.05), Group 1 and Group 3 (p=0.468, p>0.05), and Group 2 and Group 3 (p=0.083, p>0.05). CONCLUSIONS: Stapled and conventional suturing resist similar pressure and tension thresholds.


Subject(s)
Abdominal Wall , Cadaver , Suture Techniques , Humans , Animals , Swine , Abdominal Wall/surgery , Abdominal Wound Closure Techniques , Surgical Stapling , Models, Animal , Fasciotomy/methods , Female , Male
4.
Physiol Res ; 73(2): 217-225, 2024 Apr 30.
Article in English | MEDLINE | ID: mdl-38710053

ABSTRACT

An analytical method for studying DNA degradation by electrophoresis after cell lysis and visualization of DNA fragments with fluorescent dye, comet assay, was used to evaluate the viability of the endothelial layer of human arterial grafts with the aim of identifying the procedure that will least damage the tissue before cryopreservation. Four groups of samples were studied: cryopreserved arterial grafts that were thawed in two different ways, slowly lasting 2 hours or rapidly for approx. 7 minutes. Arterial grafts that were collected as part of multiorgan procurement with minimal warm ischemia time. Cadaveric grafts were taken as part of the autopsy, so they have a more extended period of warm ischemia. The HeadDNA (%) parameter and others commonly used parameters like TailDNA (%). TailMoment, TailLength, OliveMoment, TailMoment to characterize the comet were used to assess viability in this study. The ratio of non-decayed to decayed nuclei was determined from the values found. This ratio for cadaveric grafts was 0.63, for slowly thawed cryopreserved grafts 2.9, for rapidly thawed cryopreserved grafts 1.9, and for multi-organ procurement grafts 0.68. The results of the study confirmed the assumption that the allografts obtained from cadaveric donors are the least suitable. On the other hand, grafts obtained from multiorgan donors are better in terms of viability monitored by comet assay. Keywords: Arterial grafts, Cryopreservation, Cadaveric, Multiorgan procurement, Viability, Comet assay.


Subject(s)
Comet Assay , Cryopreservation , Humans , Cadaver , Arteries/transplantation , Graft Survival/physiology
5.
Eur Radiol Exp ; 8(1): 56, 2024 May 08.
Article in English | MEDLINE | ID: mdl-38714623

ABSTRACT

OBJECTIVE: Guyon's canal syndrome is caused by compression of the ulnar nerve at the wrist, occasionally requiring decompression surgery. In recent times, minimally invasive approaches have gained popularity. The aim of this study was to assess the efficacy and safety of ultrasound-guided thread release for transecting the palmar ligament in Guyon's canal without harming surrounding structures, in a cadaveric specimen model. METHODS: After ethical approval, thirteen ultrasound-guided thread releases of Guyon's canal were performed on the wrists of softly embalmed anatomic specimens. Cadavers showing injuries or prior operations at the hand were excluded. Subsequently, the specimens were dissected, and the outcome of the interventions and potential damage to adjacent anatomical structures as well as ultrasound visibility were evaluated with a score from one to three. RESULTS: Out of 13 interventions, a complete transection was achieved in ten cases (76.9%), and a partial transection was documented in three cases (23.1%). Irrelevant lesions on the flexor tendons were observed in two cases (15.4%), and an arterial branch was damaged in one (7.7%). Ultrasound visibility varied among specimens, but essential structures were delineated in all cases. CONCLUSION: Ultrasound-guided thread release of Guyon's canal has shown promising first results in anatomic specimens. However, further studies are required to ensure the safety of the procedure. RELEVANCE STATEMENT: Our study showed that minimally invasive ultrasound-guided thread release of Guyon's canal is a feasible approach in the anatomical model. The results may provide a basis for further research and refinement of this technique. KEY POINTS: • In Guyon's canal syndrome, the ulnar nerve is compressed at the wrist, often requiring surgical release. • We adapted and tested a minimally invasive ultrasound-guided thread release technique in anatomic specimens. • The technique was effective; however, in one specimen, a small anatomic branch was damaged.


Subject(s)
Cadaver , Minimally Invasive Surgical Procedures , Ultrasonography, Interventional , Humans , Ultrasonography, Interventional/methods , Minimally Invasive Surgical Procedures/methods , Male , Female , Ulnar Nerve Compression Syndromes/surgery , Ulnar Nerve Compression Syndromes/diagnostic imaging , Aged , Decompression, Surgical/methods
6.
Invest Ophthalmol Vis Sci ; 65(5): 13, 2024 May 01.
Article in English | MEDLINE | ID: mdl-38713484

ABSTRACT

Purpose: The purpose of this study was to measure intraocular pressure (IOP) elevation while applying standard gonioscopy, selective laser trabeculoplasty (SLT), and laser iridotomy procedural lenses. Methods: Twelve cadaver eyes were mounted to a custom apparatus and cannulated with a pressure transducer which measured IOP. The apparatus was mounted to a load cell which measured the force on the eye. Six ophthalmologists performed simulated gonioscopy (Sussman 4 mirror lens), SLT (Latina lens), and laser iridotomy (Abraham lens) while a computer recorded IOP (mm Hg) and force (grams). The main outcome measures were IOP and force applied to the eye globe during ophthalmic diagnostics and procedures. Results: The average IOP's during gonioscopy, SLT, and laser iridotomy were 43.2 ± 16.9 mm Hg, 39.8 ± 9.9 mm Hg, and 42.7 ± 12.6 mm Hg, respectively. The mean force on the eye for the Sussman, Latina, and Abraham lens was 40.3 ± 26.4 grams, 66.7 ± 29.8 grams, and 65.5 ± 35.9 grams, respectively. The average force applied to the eye by the Sussman lens was significantly lower than both the Latina lens (P = 0.0008) and the Abraham lens (P = 0.001). During gonioscopy indentation, IOP elevated on average to 80.5 ± 22.6 mm Hg. During simulated laser iridotomy tamponade, IOP elevated on average to 82.3 ± 27.2 mm Hg. Conclusions: In cadaver eyes, the use of standard ophthalmic procedural lenses elevated IOP by approximately 20 mm Hg above baseline.


Subject(s)
Cadaver , Gonioscopy , Intraocular Pressure , Iris , Laser Therapy , Trabeculectomy , Humans , Intraocular Pressure/physiology , Laser Therapy/methods , Iris/surgery , Trabeculectomy/methods , Tonometry, Ocular , Aged , Iridectomy/methods , Female , Male , Aged, 80 and over
7.
J Phys Ther Educ ; 38(2): 107-115, 2024 Jun 01.
Article in English | MEDLINE | ID: mdl-38758175

ABSTRACT

INTRODUCTION: Despite a long history of using human donor dissection (HDD) for physical therapy (PT) anatomy education, there are no PT guidelines that require HDD. The purpose of this quantitative causal-comparative study was to determine if Doctor of Physical Therapy students who used HDD had different grades both within anatomy and within courses that require retention and application of anatomical knowledge (kinesiology and a foundational musculoskeletal course) compared with those who used virtual 3-dimensional anatomical software (VAS). REVIEW OF LITERATURE: Numerous factors affect the decision to use HDD within PT anatomy, and few PT studies have compared the effectiveness of VAS to HDD. SUBJECTS: All students who took anatomy in an entry-level PT program from 2018 to 2021 (232 total students, 115 who used HDD in 2018-2019 and 117 who used VAS in 2020-2021). METHODS: Mann-Whitney tests were used to compare anatomy grades (course, written examination, and practical examination) and future grades in kinesiology and a foundational musculoskeletal course for students who used HDD or VAS. RESULTS: Physical therapy students who used VAS had statistically significant higher anatomy course grades (VAS 93.81% ± 4.99% to HDD 92.20% ± 4.53%) and higher practical examination grades (VAS 97.43% ± 2.91% to HDD 93.55% ± 4.39%) compared with those who used HDD. However, there were no significant differences between groups on written anatomy examinations (VAS 89.42% ± 7.21% to HDD 90.40% ± 4.94%), kinesiology grades (VAS 91.86% ± 4.52% to HDD 92.80% ± 4.27%), or foundational musculoskeletal grades (VAS 89.50% ± 3.89% to HDD 89.77% ± 3.83%). DISCUSSION AND CONCLUSION: The causal-comparative study design prevents concluding that PT student grade differences were due exclusively to either anatomy laboratory method. It does provide preliminary evidence that the PT anatomy laboratory method did not practically affect anatomy performance or long-term application of anatomy knowledge in future coursework.


Subject(s)
Anatomy , Dissection , Humans , Anatomy/education , Educational Measurement , Cadaver , Male , Physical Therapy Specialty/education , Female
8.
Article in English | MEDLINE | ID: mdl-38758688

ABSTRACT

BACKGROUND: Arthroscopy has become increasingly common for diagnosis and treatment of ankle joint pathology. The four most common portals used for ankle arthroscopy are the anteromedial, anterolateral, posteromedial, and posterolateral. Anatomy of neurovascular structures along the ankle can significantly vary. METHODS: The distance of neurovascular structures was compared with anatomical landmarks of ankle arthroscopic portals to verify safe zones for scope insertion. Twenty-six fresh frozen cadavers were used, with dissection of standard anatomical landmarks and neurovascular structures. Portals were made and verified with a 2.7-mm arthroscope. RESULTS: Significant differences were found in mean distances between anatomical landmarks except for the peroneus tertius tendon to the intermediate dorsal cutaneous nerve (P = .181; all others, P < .0001). In quantifying a scope space, the anteromedial and anterolateral portals had the largest margin of error at 0.82 cm and 1.04 cm, respectively. The saphenous nerve and vein were an average of 1.39 cm and 1.23 cm, respectively, from the anteromedial portal. The peroneus tertius tendon was an average of 0.23 cm from the intermediate dorsal cutaneous nerve. The tibialis anterior tendon was an average of 1.10 cm lateral to the medial gutter; the peroneus tertius tendon, 1.31 cm medial to the lateral gutter; and the Achilles tendon, 0.94 and 0.73 cm from the medial and lateral gutters, respectively. CONCLUSIONS: Among common ankle arthroscopic approaches, the anterolateral portal features the highest anatomic variability. These data support the standard protocol of beginning with the anteromedial portal to facilitate visualization of lateral-sided anatomy before anterolateral portal placement.


Subject(s)
Ankle Joint , Arthroscopy , Cadaver , Humans , Arthroscopy/methods , Ankle Joint/anatomy & histology , Ankle Joint/surgery , Male , Female , Aged , Middle Aged , Aged, 80 and over
9.
J Orthop Surg (Hong Kong) ; 32(2): 10225536241257169, 2024.
Article in English | MEDLINE | ID: mdl-38769768

ABSTRACT

Background: The purpose of this study was to investigate the effect of 3D-printed technology to repair glenoid bone defect on shoulder joint stability. Methods: The shoulder joints of 25 male cadavers were tested. The 3D-printed glenoid pad was designed and fabricated. The specimens were divided into 5 groups. Group A: no bone defect and the structure of the glenoid labrum and joint capsule was intact; Group B: Anterior inferior bone defect of the shoulder glenoid; Group C: a pad with a width of 2 mm was installed; Group D: a pad with a width of 4 mm was installed; Group E: a pad with a width of 6 mm was installed. This study measured the distance the humeral head moved forward at the time of glenohumeral dislocation and the maximum load required to dislocate the shoulder. Results: The shoulder joint stability and humerus displacement was significantly lower in groups B and C compared with group A (p < .05). Compared with group A, the stability of the shoulder joint of group D was significantly improved (p < .05). However, there was no significant difference in humerus displacement between groups D and A (p > .05). In addition, compared with group A, shoulder joint stability was significantly increased and humerus displacement was significantly decreased in group E (p < .05). Conclusion: The 3D-printed technology can be used to make the shoulder glenoid pad to perfectly restore the geometric shape of the shoulder glenoid articular surface. Moreover, the 3D-printed pad is 2 mm larger than the normal glenoid width to restore the initial stability of the shoulder joint.


Subject(s)
Alloys , Cadaver , Printing, Three-Dimensional , Shoulder Joint , Titanium , Humans , Male , Shoulder Joint/surgery , Shoulder Joint/physiopathology , Biomechanical Phenomena , Joint Instability/surgery , Joint Instability/physiopathology , Glenoid Cavity/surgery , Prosthesis Design
10.
J Orthop Traumatol ; 25(1): 27, 2024 May 20.
Article in English | MEDLINE | ID: mdl-38769283

ABSTRACT

BACKGROUND: Tibial plateau fractures involving posteromedial (PM) and posterolateral (PL) columns are complex injuries that require an appropriate approach. The management of the PL column in these cases can be controversial, and limitations using deep posteromedial interval approaches have been referenced. In this paper, a modification of the Lobenhoffer approach, designed to optimize the access to the PL column, is described in detail. The aim of this study was to assess the feasibility of this approach in a cadaveric anatomical study. MATERIALS AND METHODS: In total, five fresh-frozen cadaveric specimens were used for detailed anatomical study surrounding the approach. Relationships with cutaneous and deep neurovascular structures were evaluated. The exposure area of the PL and PM columns using this approach was assessed. RESULTS: The cadaveric study showed safe and adequate exposure. Oblique skin and fascia incision just medial to the posterior midline was safe to protect the medial sural cutaneous nerve and the small saphenous vein. Elevation of the popliteus and tibialis posterior muscles offered safe protection of the anterior tibial artery and popliteal neurovascular bundle during retractor placement. Adequate full proximal exposure of the PM and PL columns, including the posterolateral lateral (PLL) and posterolateral central (PLC) segments, was obtained in all specimens. CONCLUSIONS: The Modified Oblique Lobenhoffer (MOL) approach can be a feasible option to access PL and PM columns in tibial plateau fractures. LEVEL OF EVIDENCE: IV.


Subject(s)
Cadaver , Fracture Fixation, Internal , Tibial Fractures , Humans , Tibial Fractures/surgery , Fracture Fixation, Internal/methods , Feasibility Studies , Tibial Plateau Fractures
11.
Sci Rep ; 14(1): 10760, 2024 05 10.
Article in English | MEDLINE | ID: mdl-38729983

ABSTRACT

Measurement of auricle parameters for planning and post-operative evaluation presents substantial challenges due to the complex 3D structure of the human auricle. Traditional measurement methods rely on manual techniques, resulting in limited precision. This study introduces a novel automated surface-based three-dimensional measurement method for quantifying human auricle parameters. The method was applied to virtual auricles reconstructed from Computed Tomography (CT) scans of a cadaver head and subsequent measurement of important clinically relevant aesthetical auricular parameters (length, width, protrusion, position, auriculocephalic angle, and inclination angle). Reference measurements were done manually (using a caliper and using a 3D landmarking method) and measurement precision was compared to the automated method. The CT scans were performed using both a contemporary high-end and a low-end CT scanner. Scans were conducted at a standard scanning dose, and at half the dose. The automatic method demonstrated significantly higher precision in measuring auricle parameters compared to manual methods. Compared to traditional manual measurements, precision improved for auricle length (9×), width (5×), protrusion (5×), Auriculocephalic Angle (5-54×) and posteroanterior position (23×). Concerning parameters without comparison with a manual method, the precision level of supero-inferior position was 0.489 mm; and the precisions of the inclination angle measurements were 1.365 mm and 0.237 mm for the two automated methods investigated. Improved precision of measuring auricle parameters was associated with using the high-end scanner. A higher dose was only associated with a higher precision for the left auricle length. The findings of this study emphasize the advantage of automated surface-based auricle measurements, showcasing improved precision compared to traditional methods. This novel algorithm has the potential to enhance auricle reconstruction and other applications in plastic surgery, offering a promising avenue for future research and clinical application.


Subject(s)
Algorithms , Ear Auricle , Imaging, Three-Dimensional , Tomography, X-Ray Computed , Humans , Ear Auricle/diagnostic imaging , Ear Auricle/anatomy & histology , Tomography, X-Ray Computed/methods , Imaging, Three-Dimensional/methods , Cadaver , Male
12.
Sci Rep ; 14(1): 10881, 2024 05 13.
Article in English | MEDLINE | ID: mdl-38740762

ABSTRACT

This cadaveric study aimed to evaluate the safety and usability of a novel robotic system for posterior cervical pedicle screw fixation. Three human cadaveric specimens and C2-T3 were included. Freshly frozen human cadaver specimens were prepared and subjected to robot-assisted posterior cervical pedicle screw fixation using the robotic system. The accuracy of screw placement, breach rate, and critical structure violations were evaluated. The results were statistically compared with those of previous studies that used different robotic systems for cervical pedicle screw fixation. The robotic system demonstrated a high accuracy rate in screw placement. A significant number of screws were placed within predetermined safe zones. The total entry offset was 1.08 ± 0.83 mm, the target offset was 1.86 ± 0.50 mm, and the angle offset was 2.14 ± 0.77°. Accuracy rates comparable with those of previous studies using different robotic systems were achieved. The system was also feasible, allowing precise navigation and real-time feedback during the procedure. This cadaveric study validated the safety and usability of the novel robotic system for posterior cervical pedicle screw fixation. The system exhibited high precision in screw placement, and the results support the extension of the indications for robot-assisted pedicle screw fixation from the lumbar spine to the cervical spine.


Subject(s)
Cadaver , Cervical Vertebrae , Feasibility Studies , Pedicle Screws , Robotic Surgical Procedures , Humans , Cervical Vertebrae/surgery , Robotic Surgical Procedures/methods , Robotic Surgical Procedures/instrumentation , Spinal Fusion/methods , Spinal Fusion/instrumentation , Male , Female
13.
Sci Rep ; 14(1): 10875, 2024 05 13.
Article in English | MEDLINE | ID: mdl-38740845

ABSTRACT

Three-dimensional information is essential for a proper understanding of the healing potential of the menisci and their overall role in the knee joint. However, to date, the study of meniscal vascularity has relied primarily on two-dimensional imaging techniques. Here we present a method to elucidate the intricate 3D meniscal vascular network, revealing its spatial arrangement, connectivity and density. A polymerizing contrast agent was injected into the femoral artery of human cadaver legs, and the meniscal microvasculature was examined using micro-computed tomography at different levels of detail and resolution. The 3D vascular network was quantitatively assessed in a zone-base analysis using parameters such as diameter, length, tortuosity, and branching patterns. The results of this study revealed distinct vascular patterns within the meniscus, with the highest vascular volume found in the outer perimeniscal zone. Variations in vascular parameters were found between the different circumferential and radial meniscal zones. Moreover, through state-of-the-art 3D visualization using micro-CT, this study highlighted the importance of spatial resolution in accurately characterizing the vascular network. These findings, both from this study and from future research using this technique, improve our understanding of microvascular distribution, which may lead to improved therapeutic strategies.


Subject(s)
Imaging, Three-Dimensional , Microvessels , X-Ray Microtomography , Humans , Imaging, Three-Dimensional/methods , Microvessels/diagnostic imaging , X-Ray Microtomography/methods , Menisci, Tibial/diagnostic imaging , Menisci, Tibial/blood supply , Meniscus/diagnostic imaging , Male , Cadaver , Female
14.
PeerJ ; 12: e17179, 2024.
Article in English | MEDLINE | ID: mdl-38803578

ABSTRACT

Surgical intervention is a common option for the treatment of wrist joint arthritis and traumatic wrist injury. Whether this surgery is arthrodesis or a motion preserving procedure such as arthroplasty, wrist joint biomechanics are inevitably altered. To evaluate effects of surgery on parameters such as range of motion, efficiency and carpal kinematics, repeatable and controlled motion of cadaveric specimens is required. This study describes the development of a device that enables cadaveric wrist motion to be simulated before and after motion preserving surgery in a highly controlled manner. The simulator achieves joint motion through the application of predetermined displacements to the five major tendons of the wrist, and records tendon forces. A pilot experiment using six wrists aimed to evaluate its accuracy and reproducibility. Biplanar X-ray videoradiography (BPVR) and X-Ray Reconstruction of Moving Morphology (XROMM) were used to measure overall wrist angles before and after total wrist arthroplasty. The simulator was able to produce flexion, extension, radioulnar deviation, dart thrower's motion and circumduction within previously reported functional ranges of motion. Pre- and post-surgical wrist angles did not significantly differ. Intra-specimen motion trials were repeatable; root mean square errors between individual trials and average wrist angle and tendon force profiles were below 1° and 2 N respectively. Inter-specimen variation was higher, likely due to anatomical variation and lack of wrist position feedback. In conclusion, combining repeatable intra-specimen cadaveric motion simulation with BPVR and XROMM can be used to determine potential effects of motion preserving surgeries on wrist range of motion and biomechanics.


Subject(s)
Cadaver , Range of Motion, Articular , Wrist Joint , Humans , Wrist Joint/surgery , Wrist Joint/diagnostic imaging , Wrist Joint/physiology , Wrist Joint/anatomy & histology , Biomechanical Phenomena , Radiography/methods , Male , Aged , Reproducibility of Results , Tendons/surgery , Tendons/diagnostic imaging , Tendons/physiology , Tendons/anatomy & histology , Female
15.
Pain Physician ; 27(4): E431-E439, 2024 May.
Article in English | MEDLINE | ID: mdl-38805538

ABSTRACT

BACKGROUND: A thoracic paravertebral block can be a useful opioid-sparing technique for controlling postoperative pain after thoracic and visceral abdominal surgery. OBJECTIVES: Our aim was to assess dye spread into the ventral branch, connecting branch, sympathetic trunk, thoracic paravertebral space, and epidural space after performing a modified ultrasound-assisted thoracic paravertebral block via the intervertebral foramen. STUDY DESIGN: This was a nonrandomized cadaveric study. SETTING: The cadavers were kept at the Department of Anatomopathology of the San Salvatore Academic Hospital of L'Aquila (L'Aquila, Italy). METHODS: We performed a bilateral thoracic paravertebral block via the intervertebral foramen at the second, fifth, ninth, and twelfth thoracic vertebrae. A linear array ultrasound transducer was used. Then, cadaveric dissection was performed. A Tuohy needle was gently inserted in-plane with the ultrasound beam in a lateromedial direction to contact the spinous process. Subsequently, the needle tip was advanced 2 mm along the transverse process of the vertebra, and 5 mL of methylene blue 1% dye was injected at each level. Then, 2 continuous catheter sets were inserted. RESULTS: Forty intervertebral foramen blocks were performed in 5 cadavers. For 38 injection sites, we found dye on both sides of the thoracic paravertebral space and epidural space at each level of puncture. The retropleural organs were also stained. In 2 cases, methylene blue accumulated intramuscularly at the level of the twelfth thoracic vertebra. RESULTS: The spread of dye into the ventral rami, communicating rami, and sympathetic trunk in the thoracic paravertebral space and the epidural space was assessed. We also evaluated the position and the distance (mm) between the catheter tip and the thoracic intervertebral foramen content. Finally, puncturing of intervertebral blood vessels, nerve rootlet and root damage, lung and pleural injuries, and the extent of intramuscular dye accumulation were evaluated and recorded as iatrogenic complications related to the anesthetic procedure. Forty thoracic paravertebral blocks in 5 cadavers were performed. For 38 injection sites, we found dye on both sides of the thoracic paravertebral space and the epidural space at each level of puncture. The ventral rami, the communicating rami, and the sympathetic trunk were also stained. In 2 cases, methylene blue accumulated intramuscularly at the level of the twelfth thoracic vertebra. LIMITATIONS: The first limitation of this study is its small sample size. In addition, the study design did not consider or measure the width of the transverse processes. Another limitation is that the ultrasound beam could not identify the thoracic intervertebral foramen content or the needle tip behind the acoustic shadow of the transverse and vertebral articular processes. CONCLUSION: Paravertebral block via the thoracic intervertebral foramen achieved consistent dye spread into the thoracic paravertebral space and epidural space, capturing retropleural organs.


Subject(s)
Cadaver , Nerve Block , Thoracic Vertebrae , Humans , Nerve Block/methods , Ultrasonography, Interventional/methods , Male
16.
Microsurgery ; 44(5): e31182, 2024 Jul.
Article in English | MEDLINE | ID: mdl-38798147

ABSTRACT

BACKGROUND: Brachial plexus injury is recognized as one of the most severe clinical challenges due to the complex anatomical configuration of the brachial plexus and its propensity for variation, which complicates safe clinical interventions. This study aimed to ascertain the prevalence and characterize the types of brachial plexus variations, and to elucidate their clinical implications. MATERIALS AND METHODS: We conducted meticulous dissections of 60 formalin-fixed cadavers' upper arm, axilla and lower neck to reveal and assess the roots, trunks, divisions, cords, and branches of the brachial plexus. The pattern of branching was noted by groups of dissecting medical students and confirmed by the senior anatomists. The variations discovered were record and photographed using a digital camera for further analysis. RESULTS: Variations in the brachial plexus were identified in 40 of the 60 cadavers, yielding a prevalence rate of 66.7%. These variations were classified into root anomalies (2.1%), trunk anomalies (8.5%), division anomalies (2.1%), and cord anomalies (4.3%). Notably, anomalies in communicating branches were observed in 39 cadavers (83.0%): 14 with bilateral anomalies, 14 with anomalies on the left side, and 11 on the right side. These communicating branches formed connections between the roots and other segments, including trunks, cords, and terminal nerves, and involved the median, musculocutaneous, and ulnar nerves. CONCLUSION: The frequency and diversity of brachial plexus variations, particularly in communicating branches, are significant in cadavers. It is imperative that these variations are carefully considered during the diagnostic process, treatment planning, and prior to procedures such as supraclavicular brachial plexus blocks and nerve transfers, to mitigate the risk of iatrogenic complications.


Subject(s)
Anatomic Variation , Brachial Plexus , Cadaver , Humans , Brachial Plexus/anatomy & histology , Brachial Plexus/abnormalities , Female , Male , Adult , Dissection , Middle Aged , Aged , Aged, 80 and over , Clinical Relevance
17.
J Craniofac Surg ; 35(4): e391-e394, 2024 Jun 01.
Article in English | MEDLINE | ID: mdl-38722329

ABSTRACT

The occipital emissary foramen (OEF) located on the occipital bone transmits the occipital emissary vein, which connects the occipital vein to the confluence of cranial venous sinuses. The OEF varies in incidence, number, size, and location. Knowledge of this foramen is essential for carrying out suboccipital and transcondylar surgeries without clinical implications. Hence, the study was planned. The aim of the present study is to elaborate on incidence, location, and morphometry consisting of the number and size of this foramen in light of clinical bearing in the context of the Indian population. The study was carried out in the Department of Anatomy using 80 skulls of unknown age and sex. The occipital bone of the skull was observed for the incidence, number, size, and location of the occipital emissary vein and associated clinical implications were elaborated. The incidence of occipital foramen was 36.25% and detected in 29 skulls. All these occipital foramina were patent. The mean diameter of this foramen was 0.6 mm. The most common location of these foramina was the left side of the foramen magnum, followed by the left side of the external occipital crest. The information about the incidence, number, size, and location of OEF is important to prevent catastrophic bleeding during surgery in the region of the occipital bone. The awareness of differential morphometry and morphology of occipital foramina is of great importance for neurosurgeons during suboccipital craniotomy and skull base surgeries, including far lateral and transcondylar approaches to access posterior cranial fossa for management of pathologies in the cranial cavity.


Subject(s)
Cadaver , Occipital Bone , Humans , Occipital Bone/anatomy & histology , Cerebral Veins/anatomy & histology , India , Prevalence , Male , Cranial Sinuses/anatomy & histology , Foramen Magnum/anatomy & histology , Female , Anatomic Variation
18.
Musculoskelet Surg ; 108(2): 153-162, 2024 Jun.
Article in English | MEDLINE | ID: mdl-38713360

ABSTRACT

PURPOSE: It is unclear which triceps tendon repair constructs and techniques produce the strongest biomechanical performance while minimizing the risk of gap formation and repair failure. We aimed to determine associations of construct and technique variables with the biomechanical strength of triceps tendon repairs. PubMed, Embase, Cochrane Library, Web of Science, Scopus, and ClinicalTrials.gov were systematically searched for peer-reviewed studies on biomechanical strength of triceps tendon repairs in human cadavers. 6 articles met the search criteria. Meta-regression was performed on the pooled dataset (123 specimens). Outcomes of interest included gap formation, failure mode, and ultimate failure load. Covariates were fixation type; number of implants; and number of sutures. Stratification by covariates was performed. We found no association between fixation type and ultimate failure load; however, suture anchor fixation was associated with less gap formation compared with transosseous direct repair (ß = - 1.1; 95% confidence interval [CI]:- 2.2, - 0.04). A greater number of implants was associated with smaller gap formation (ß = - 0.77; 95% CI: - 1.3, - 0.28) while a greater number of sutures was associated with higher ultimate failure load ( ß= 3; 95% CI: 21, 125). In human cadaveric models, the number of sutures used in triceps tendon repairs may be more important than the fixation type or number of implants for overall strength. If using a transosseous direct repair approach to repair triceps tendon tears, surgeons may choose to use more sutures in their repair in order to balance the risk of larger gap formation when compared to indirect repair techniques. LEVEL OF EVIDENCE: Level III.


Subject(s)
Cadaver , Suture Techniques , Tendon Injuries , Humans , Biomechanical Phenomena , Suture Anchors , Tendon Injuries/surgery , Tendons/surgery
19.
J Korean Med Sci ; 39(20): e159, 2024 May 27.
Article in English | MEDLINE | ID: mdl-38804009

ABSTRACT

Anatomy is a foundational subject in medicine and serves as its language. Hippocrates highlighted its importance, while Herophilus pioneered human dissection, earning him the title of the founder of anatomy. Vesalius later established modern anatomy, which has since evolved historically. In Korea, formal anatomy education for medical training began with the introduction of Western medicine during the late Joseon Dynasty. Before and after the Japanese occupation, anatomy education was conducted in the German style, and after liberation, it was maintained and developed by a small number of domestic anatomists. Medicine in Korea has grown alongside the country's rapid economic and social development. Today, 40 medical colleges produce world-class doctors to provide the best medical care service in the country. However, the societal demand for more doctors is growing in order to proactively address to challenges such as public healthcare issues, essential healthcare provision, regional medical service disparities, and an aging population. This study examines the history, current state, and challenges of anatomy education in Korea, emphasizing the availability of medical educators, support staff, and cadavers for gross anatomy instruction. While variations exist between Seoul and provincial medical colleges, each manages to deliver adequate education under challenging conditions. However, the rapid increase in medical student enrollment threatens to strain existing anatomy education resources, potentially compromising educational quality. To address these concerns, we propose strategies for training qualified gross anatomy educators, ensuring a sustainable cadaver supply, and enhancing infrastructure.


Subject(s)
Anatomy , Education, Medical , Humans , Anatomy/education , Cadaver , Education, Medical/history , Education, Medical/methods , Education, Medical/trends , History, 20th Century , Republic of Korea , Schools, Medical/history , Schools, Medical/trends
20.
BMC Vet Res ; 20(1): 194, 2024 May 11.
Article in English | MEDLINE | ID: mdl-38734622

ABSTRACT

In the left axilla of a formalin-embalmed adult female cross-breed dog, an unusual course of the axillary artery in relation to the brachial plexus was noted. A part of the axillary artery after the origin of the subscapular artery coursed through the loop formed by the contributions of the caudal pectoral and lateral thoracic nerves and then between the median and ulnar nerves. Thus, the common trunk for the latter two nerves was missing. Instead, in the proximal brachium, they communicated with each other in both directions. A communicating branch between the cranial and caudal pectoral nerves forming a nerve loop, ansa pectoralis lacked the axillary artery and was instead traversed by the subscapular artery. This is a variation in the relationship between the axillary artery and brachial plexus in the domestic dog and has not been reported in the literature yet. The axillary artery entrapped by the contributions of the caudal and lateral thoracic nerves may be considered as a risk factor for the neuroarterial compressions with non-specific signs and should be taken into account both in surgery and imaging.


Subject(s)
Axillary Artery , Brachial Plexus , Cadaver , Animals , Dogs , Axillary Artery/anatomy & histology , Brachial Plexus/anatomy & histology , Female , Terminology as Topic
SELECTION OF CITATIONS
SEARCH DETAIL
...