Role of Na-Montmorillonite on Microbially Induced Calcium Carbonate Precipitation.

The use of additives has generated significant attention due to their extensive application in the microbially induced calcium carbonate precipitation (MICP) process. This study aims to discuss the effects of Na-montmorillonite (Na-MMT) on CaCO3 crystallization and sandy soil consolidation through the MICP process. Compared with the traditional MICP method, a larger amount of CaCO3 precipitate was obtained. Moreover, the reaction of Ca2+ ions was accelerated, and bacteria were absorbed by a small amount of Na-MMT. Meanwhile, an increase in the total cementing solution (TCS) was not conducive to the previous reaction. This problem was solved by conducting the reaction with Na-MMT. The polymorphs and morphologies of the CaCO3 precipitates were tested by using X-ray diffraction and scanning electron microscopy. Further, when Na-MMT was used, the morphology of CaCO3 changed from an individual precipitate to agglomerations of the precipitate. Compared to the experiments without Na-MMT in the MICP process, the addition of Na-MMT significantly reduced the hydraulic conductivity (HC) of sandy soil consolidated.

Production of nanocalcite crystal by a urease producing halophilic strain of Staphylococcus saprophyticus and analysis of its properties by XRD and SEM.

Cementation of salt-containing soils can be achieved by salt-tolerant or halophilic calcite precipitation bacteria. Therefore, the isolation of calcite-producing bacteria in the presence of salt is the first step in the microbial cementation of saline soils. Urease producing bacteria can cause calcite nano-crystals to precipitate by producing urease in the presence of urea and calcium. The purpose of this study was to isolate urease producing halophilic bacteria in order to make calcite precipitate in saline soil. The calcite and the properties of the strains were further analyzed by X-ray diffraction (XRD) and scanning electron microscope equipped with an energy dispersive X-ray detector. In this study, a total of 110 halophilic strains were isolated, from which 58 isolates proved to have the ability of urease production. Four strains were identified to produce nano-calcite using urease activity in the precipitation medium. The XRD studies showed that the size of these particles was in the range of 40-60 nm. Strain H3 revealed that calcite is mostly produced in the precipitation medium containing 5% salt in comparison with other strains. This strain also produced calcite precipitates in the precipitation medium containing 15% salt. Phylogenetic analysis indicated that these isolates are about 99-100% similar to Staphylococcus saprophyticus.

New Sources of Calcium (Chicken Eggshells, Chelates) - Preparation of Raw Material and Tablets.

BACKGROUND: There are many calcium supplements available in the market, especially those containing calcium in the form of carbonate, which unfortunately is not absorbed by the body to a sufficient degree. METHOD: Therefore, an attempt was made to prepare new sources of calcium, consuming the chicken eggshells as natural raw materials, which were used in preparation of tablets containing calcium carbonate and calcium citrate as well as tablets with calcium carbonate and calcium bisglycinate. The influence of raw material properties on the pharmaceutical availability of calcium from the obtained tablets was investigated. RESULTS: Based on the obtained calcium release profiles from the prepared tablets, it was found that the optimal source of calcium is a preparation containing calcium from chicken eggshells. It was found that both chicken eggshells and calcium bisglycinate (chelate) may be new, prospective sources of calcium. Calcium citrate prepared using eggshells as starting materials and bisglycinate is completely released within no more than 150 minutes. CONCLUSION: In turn, calcium carbonate added to calcium bisglycinate statistically significantly prolonges the release of calcium ions to 4 hours.

Biosequestration of copper by bacteria isolated from an abandoned mine by using microbially induced calcite precipitation.

Abandoned mine sites are frequently polluted with high concentrations of heavy metals. In this study, 25 calcite-forming bacteria were newly isolated from the soil of an abandoned metal mine in Korea. Based on their urease activity, calcite production, and resistance to copper toxicity, four isolates were selected and further identified by 16S rRNA gene sequencing. Among the isolates, Sporosarcina soli B-22 was selected for subsequent copper biosequestration studies, using the sand impermeability test by production of calcite and extracellular polymeric substance. High removal rates (61.8%) of copper were obtained when the sand samples were analyzed using an inductively coupled plasma-optical emission spectrometer following 72 h of incubation. Scanning electron microscopy showed that the copper carbonate precipitates had a diameter of approximately 5-10 µm. X-ray diffraction further confirmed the presence of copper carbonate and calcium carbonate crystals.

Bioprecipitation of Calcium Carbonate Crystals by Bacteria Isolated from Saline Environments Grown in Culture Media Amended with Seawater and Real Brine.

The precipitation of calcium carbonate and calcium sulphate by isolated bacteria from seawater and real brine obtained in a desalination plant growth in culture media containing seawater and brine as mineral sources has been studied. However, only bioprecipitation was detected when the bacteria were grown in media with added organic matter. Biomineralization process started rapidly, crystal formation taking place in the beginning a few days after inoculation of media; roughly 90% of total cultivated bacteria showed. Six major colonies with carbonate precipitation capacity dominated bacterial community structure cultivated in heterotrophic platable bacteria medium. Taxonomic identification of these six strains through partial 16S rRNA gene sequences showed their affiliation with Gram-positive Bacillus and Virgibacillus genera. These strains were able to form calcium carbonate minerals, which precipitated as calcite and aragonite crystals and showed bacterial fingerprints or bacteria calcification. Also, carbonic anhydrase activity was observed in three of these isolated bacteria. The results of this research suggest that microbiota isolated from sea water and brine is capable of precipitation of carbonate biominerals, which can occur in situ with mediation of organic matter concentrations. Moreover, calcium carbonate precipitation ability of this microbiota could be of importance in bioremediation of CO2 and calcium in certain environments.

Implementation of in situ SAXS/WAXS characterization into silicon/glass microreactors.

A successful implementation of in situ X-ray scattering analysis of synthetized particle materials in silicon/glass microreactors is reported. Calcium carbonate (CaCO3) as a model material was precipitated inside the microchannels through the counter-injection of two aqueous solutions, containing carbonate ions and calcium ions, respectively. The synthesized calcite particles were analyzed in situ in aqueous media by combining Small Angle X-ray Scattering (SAXS) and Wide Angle X-ray Scattering (WAXS) techniques at the ESRF ID02 beam line. At high wavevector transfer, WAXS patterns clearly exhibit different scattering features: broad scattering signals originating from the solvent and the glass lid of the chip, and narrow diffraction peaks coming from CaCO3 particles precipitated rapidly inside the microchannel. At low wavevector transfer, SAXS reveals the rhombohedral morphology of the calcite particles together with their micrometer size without any strong background, neither from the chip nor from the water. This study demonstrates that silicon/glass chips are potentially powerful tools for in situ SAXS/WAXS analysis and are promising for studying the structure and morphology of materials in non-conventional conditions like geological materials under high pressure and high temperature.

Electrochemical struvite precipitation from digestate with a fluidized bed cathode microbial electrolysis cell.

Microbial electrolysis cells (MECs) can be used to simultaneously convert wastewater organics to hydrogen and precipitate struvite, but scale formation at the cathode surface can block catalytic active sites and limit extended operation. To promote bulk phase struvite precipitation and minimize cathode scaling, a two-chamber MEC was designed with a fluidized bed to produce suspended particles and inhibit scale formation on the cathode surface. MEC operation elevated the cathode pH to between 8.3 and 8.7 under continuous flow conditions. Soluble phosphorus removal using digester effluent ranged from 70 to 85% with current generation, compared to 10-20% for the control (open circuit conditions). At low current densities (≤2 mA/m(2)), scouring of the cathode by fluidized particles prevented scale accumulation over a period of 8 days. There was nearly identical removal of soluble phosphorus and magnesium from solution, and an equimolar composition in the collected solids, supporting phosphorus removal by struvite formation. At an applied voltage of 1.0 V, energy consumption from the power supply and pumping (0.2 Wh/L, 7.5 Wh/g-P) was significantly less than that needed by other struvite formation methods based on pH adjustment such as aeration and NaOH addition. In the anode chamber, current generation led to COD oxidation (1.1-2.1 g-COD/L-d) and ammonium removal (7-12 mM) from digestate amended with 1 g/L of sodium acetate. These results indicate that a fluidized bed cathode MEC is a promising method of sustainable electrochemical nutrient and energy recovery method for nutrient rich wastewaters.

Design of a continuous process setup for precipitated calcium carbonate production from steel converter slag.

A mineral carbonation process "slag2PCC" for carbon capture, utilization, and storage is discussed. Ca is extracted from steel slag by an ammonium salt solvent and carbonated with gaseous CO2 after the separation of the residual slag. The solvent is reused after regeneration. The effects of slag properties such as the content of free lime, fractions of Ca, Si, Fe, and V, particle size, and slag storage on the Ca extraction efficiency are studied. Small particles with a high free-lime content and minor fractions of Si and V are the most suitable. To limit the amount of impurities in the process, the slag-to-liquid ratio should remain below a certain value, which depends on the slag composition. Also, the design of a continuous test setup (total volume ∼75 L) is described, which enables quick process variations needed to adapt the system to the varying slag quality. Different precipitated calcium carbonate crystals (calcite and vaterite) are generated in different parts of the setup.

Evaluation of calcium supplementation with algae (Lithothamnion muelleri) on metabolic and inflammatory parameters in mice fed a high refined carbohydrate-containing diet.

The aim of the present study was to evaluate the potential of calcium supplementation from Lithothamnium muelleri algae on metabolic and inflammatory parameters in mice with increased adiposity. Male mice were fed and divided during 8 weeks in: control (C), a high refined carbohydrate-containing diet (HC), HC diet supplemented with 1% of Lithothamnion muelleri algae (HC + A) and HC diet supplemented with 0.9% calcium carbonate (HC + C). Animals fed HC diet had increased body weight gain and adiposity, serum glucose and cholesterol, glucose intolerance and decreased insulin sensitivity, compared to control diet. However, the HC + A and HC + C groups did not prevent these aspects and were not able to change the CD14 + cells population in adipose tissue of animals fed HC diet. Calcium supplementation with Lithothamnium muelleri algae and calcium carbonate had no protective effect against the development of adiposity, metabolic and inflammatory alterations induced by HC diet.

Bacterially induced calcium carbonate precipitation and strontium coprecipitation in a porous media flow system.

Strontium-90 is a principal radionuclide contaminant in the subsurface at several Department of Energy sites in the Western U.S., causing a threat to groundwater quality in areas such as Hanford, WA. In this work, we used laboratory-scale porous media flow cells to examine a potential remediation strategy employing coprecipitation of strontium in carbonate minerals. CaCO(3) precipitation and strontium coprecipitation were induced via ureolysis by Sporosarcina pasteurii in two-dimensional porous media reactors. An injection strategy using pulsed injection of calcium mineralization medium was tested against a continuous injection strategy. The pulsed injection strategy involved periods of lowered calcite saturation index combined with short high fluid velocity flow periods of calcium mineralization medium followed by stagnation (no-flow) periods to promote homogeneous CaCO(3) precipitation. By alternating the addition of mineralization and growth media the pulsed strategy promoted CaCO(3) precipitation while sustaining the ureolytic culture over time. Both injection strategies achieved ureolysis with subsequent CaCO(3) precipitation and strontium coprecipitation. The pulsed injection strategy precipitated 71-85% of calcium and 59% of strontium, while the continuous injection was less efficient and precipitated 61% of calcium and 56% of strontium. Over the 60 day operation of the pulsed reactors, ureolysis was continually observed, suggesting that the balance between growth and precipitation phases allowed for continued cell viability. Our results support the pulsed injection strategy as a viable option for ureolysis-induced strontium coprecipitation because it may reduce the likelihood of injection well accumulation caused by localized mineral plugging while Sr coprecipitation efficiency is maintained in field-scale applications.

Enzyme catalyzed electricity-driven water softening system.

Hardness in water, which is caused by divalent cations such as calcium and magnesium ions, presents a major water quality problem. Because hard water must be softened before use in residential applications, there is great interest in the saltless water softening process because, unlike ion exchange softeners, it does not introduce additional ions into water. In this study, a saltless hardness removal driven by bioelectrochemical energy produced through enzymatic oxidation of glucose was proposed and investigated. Glucose dehydrogenase was coated on a carbon electrode to catalyze glucose oxidation in the presence of NAD⁺ as a cofactor/mediator and methylene green as an electrocatalyst. The results showed that electricity generation stimulated hardness removal compared with non-electricity conditions. The enzymatic water softener worked upon a 6h batch operation per day for eight days, and achieved an average hardness removal of 46% at a high initial concentration of 800 mg/L as CaCO3. More hardness was removed at a lower initial concentration. For instance, at 200mg/L as CaCO3 the enzymatic water softener removed 76.4±4.6% of total hardness. The presence of magnesium ions decreased hardness removal because of its larger hydrated radius than calcium ions. The enzymatic water softener removed 70-80% of total hardness from three actual hard water samples. These results demonstrated a proof-of-concept that enzyme catalyzed electricity generation can be used to soften hard water.

Recovery of calcium carbonate from steelmaking slag and utilization for acid mine drainage pre-treatment.

The conversion of steelmaking slag (a waste product of the steelmaking process) to calcium carbonate (CaCO(3)) was tested using hydrochloric acid, ammonium hydroxide and carbon dioxide via a pH-swing process. Batch reactors were used to assess the technical feasibility of calcium carbonate recovery and its use for pre-treatment of acid mine drainage (AMD) from coal mines. The effects of key process parameters, such as the amount of acid (HCl/calcium molar ratio), the pH and the CO(2) flow rate were considered. It was observed that calcium extraction from steelmaking slag significantly increased with an increase in the amount of hydrochloric acid. The CO(2) flow rate also had a positive effect on the carbonation reaction rate but did not affect the morphology of the calcium carbonate produced for values less than 2 L/min. The CaCO(3) recovered from the bench scale batch reactor demonstrated effective neutralization ability during AMD pre-treatment compared with the commercial laboratory grade CaCO(3).

Transformation and crystallization energetics of synthetic and biogenic amorphous calcium carbonate.

Amorphous calcium carbonate (ACC) is a metastable phase often observed during low temperature inorganic synthesis and biomineralization. ACC transforms with aging or heating into a less hydrated form, and with time crystallizes to calcite or aragonite. The energetics of transformation and crystallization of synthetic and biogenic (extracted from California purple sea urchin larval spicules, Strongylocentrotus purpuratus) ACC were studied using isothermal acid solution calorimetry and differential scanning calorimetry. Transformation and crystallization of ACC can follow an energetically downhill sequence: more metastable hydrated ACC → less metastable hydrated ACC ⇒ anhydrous ACC ∼ biogenic anhydrous ACC ⇒ vaterite → aragonite → calcite. In a given reaction sequence, not all these phases need to occur. The transformations involve a series of ordering, dehydration, and crystallization processes, each lowering the enthalpy (and free energy) of the system, with crystallization of the dehydrated amorphous material lowering the enthalpy the most. ACC is much more metastable with respect to calcite than the crystalline polymorphs vaterite or aragonite. The anhydrous ACC is less metastable than the hydrated, implying that the structural reorganization during dehydration is exothermic and irreversible. Dehydrated synthetic and anhydrous biogenic ACC are similar in enthalpy. The transformation sequence observed in biomineralization could be mainly energetically driven; the first phase deposited is hydrated ACC, which then converts to anhydrous ACC, and finally crystallizes to calcite. The initial formation of ACC may be a first step in the precipitation of calcite under a wide variety of conditions, including geological CO(2) sequestration.

Hydroxyapatite formation from cuttlefish bones: kinetics.

Highly porous hydroxyapatite (Ca(10)(PO(4))(6)·(OH)(2), HA) was prepared through hydrothermal transformation of aragonitic cuttlefish bones (Sepia officinalis L. Adriatic Sea) in the temperature range from 140 to 220°C for 20 min to 48 h. The phase composition of converted hydroxyapatite was examined by quantitative X-ray diffraction (XRD) using Rietveld structure refinement and Fourier transform infrared spectroscopy (FTIR). Johnson-Mehl-Avrami (JMA) approach was used to follow the kinetics and mechanism of transformation. Diffusion controlled one dimensional growth of HA, predominantly along the a-axis, could be defined. FTIR spectroscopy determined B-type substitutions of CO(3) (2-) groups. The morphology and microstructure of converted HA was examined by scanning electron microscopy. The general architecture of cuttlefish bones was preserved after hydrothermal treatment and the cuttlefish bones retained its form with the same channel size (~80 × 300 µm). The formation of dandelion-like HA spheres with diameter from 3 to 8 µm were observed on the surface of lamellae, which further transformed into various radially oriented nanoplates and nanorods with an average diameter of about 200-300 nm and an average length of about 8-10 µm.

The effect of antiscalant addition on calcium carbonate precipitation for a simplified synthetic brackish water reverse osmosis concentrate.

The primary limitations to inland brackish water reverse osmosis (RO) desalination are the cost and technical feasibility of concentrate disposal. To decrease concentrate volume, a side-stream process can be used to precipitate problematic scaling salts and remove the precipitate with a solid/liquid separation step. The treated concentrate can then be purified through a secondary reverse osmosis stage to increase overall recovery and decrease the volume of waste requiring disposal. Antiscalants are used in an RO system to prevent salt precipitation but might affect side-stream concentrate treatment. Precipitation experiments were performed on a synthetic RO concentrate with and without antiscalant; of particular interest was the precipitation of calcium carbonate. Particle size distributions, calcium precipitation, microfiltration flux, and scanning electron microscopy were used to evaluate the effects of antiscalant type, antiscalant concentration, and precipitation pH on calcium carbonate precipitation and filtration. Results show that antiscalants can decrease precipitate particle size and change the shape of the particles; smaller particles can cause an increase in microfiltration flux decline during the solid/liquid separation step. The presence of antiscalant during precipitation can also decrease the mass of precipitated calcium carbonate.

HCO (3)(-) secretion and CaCO3 precipitation play major roles in intestinal water absorption in marine teleost fish in vivo.

The intestine of marine teleosts must effectively absorb fluid from ingested seawater to avoid dehydration. This fluid transport has been almost exclusively characterized as driven by NaCl absorption. However, an additional feature of the osmoregulatory role of the intestine is substantial net HCO(3)(-) secretion. This is suggested to drive additional fluid absorption directly (via Cl(-)/HCO(3)(-) exchange) and indirectly by precipitating ingested Ca(2+) as CaCO(3), thus creating the osmotic gradient for additional fluid absorption. The present study tested this hypothesis by perfusing the intestine of the European flounder in vivo with varying [Ca(2+)]: 10 (control), 40, and 90 mM. Fractional fluid absorption increased from 47% (control) to 73% (90 mM Ca(2+)), where almost all secreted HCO(3)(-) was excreted as CaCO(3). This additional fluid absorption could not be explained by NaCl cotransport. Instead, a significant positive relationship between Na(+)-independent fluid absorption and total HCO(3)(-) secretion was consistent with the predicted roles for anion exchange and CaCO(3) precipitation. Further analysis suggested that Na(+)-independent fluid absorption could be accounted for by net Cl(-) and H(+) absorption (from Cl(-)/HCO(3)(-) exchange and CO(2) hydration, respectively). There was no evidence to suggest that CaCO(3) alone was responsible for driving fluid absorption. However, by preventing the accumulation of luminal Ca(2+) it played a vital role by dynamically maintaining a favorable osmotic gradient all along the intestine, which permits substantially higher rates of solute-linked fluid absorption. To overcome the resulting hyperosmotic and highly acidic absorbate, it is proposed that plasma HCO(3)(-) buffers the absorbed H(+) (from HCO(3)(-) production), and consequently reduces the osmolarity of the absorbed fluid entering the body.

Utilization of calcium carbonate particles from eggshell waste as coating pigments for ink-jet printing paper.

The effective treatment and utilization of biowaste have been emphasized in our society for environmental and economic concerns. Recently, the eggshell waste in the poultry industry has been highlighted because of its reclamation potential. This study presents an economical treatment process to recover useful bioproducts from eggshell waste and their utilization in commercial products. We developed the dissolved air floatation (DAF) separation unit, which successfully recovered 96% of eggshell membrane and 99% of eggshell calcium carbonate (ECC) particles from eggshell waste within 2 h of operation. The recovered ECC particles were utilized as coating pigments for ink-jet printing paper and their impact on the ink density and paper gloss were investigated. The addition of the ECC particles as coating pigments enhances the optical density of cyan, magenta and yellow inks while decreasing the black ink density and the gloss of the coated paper.

Preparation of highly porous hydroxyapatite from cuttlefish bone.

Hydroxyapatite structures for tissue engineering applications have been produced by hydrothermal (HT) treatment of aragonite in the form of cuttlefish bone at 200 degrees C. Aragonite (CaCO(3)) monoliths were completely transformed into hydroxyapatite after 48 h of HT treatment. The substitution of CO(3) (2-) groups predominantly into the PO(4) (3-) sites of the Ca(10)(PO(4))(6)(OH)(2) structure was suggested by FT-IR spectroscopy and Rietveld structure refinement. The intensity of the nu(3)PO(4) (3-) bands increase, while the intensity of the nu(2)CO(3) (2-) bands decrease with the duration of HT treatment resulting in the formation of carbonate incorporating hydroxyapatite. The SEM micrographs have shown that the interconnected hollow structure with pillars connecting parallel lamellae in cuttlefish bone is maintained after conversion. Specific surface area (S (BET)) and total pore volume increased and mean pore size decreased by HT treatment.

Evaluation of removal of orthophosphate and ammonia from rainfall runoff using aboveground permeable reactive barrier composed of limestone and zeolite.

This paper evaluates the design and performance of an Aboveground Permeable Reactive Barrier (APRB) system made of polyethylene mesh bags (FlowBags) containing crushed limestone and zeolite for adsorption of orthophosphate-P (PO4-P) and ammonia-N (NH4-N) from rainfall runoff. Laboratory batch experiments, simulated runoff experiments and actual APRB implementations were performed to evaluate the performance of the APRB. Batch experiments were performed to determine adsorption efficiency of crushed zeolite and limestone as reactive materials in APRB for removal of dissolved ammonium nitrogen and orthophosphate phosphorus from aqueous solutions under controlled laboratory conditions. Adsorption efficiencies of zeolite and limestone were tested individually and in combination. Results show adsorption efficiency increases when the materials are used in combination. Effects of particle size, contact time, pH, and temperature were studied. Major emphasis was given to short contact times because the contact of rainfall runoff water under field conditions with APRBs would be approximately 5 minutes. Maximum removal of approximately 70% PO4-P and NH4-N was seen at 45 degrees C in 5 minutes within a pH range of 8-11. Optimum adsorbent concentration was 0.3 ppm with 20 g limestone and 10 g of zeolites. Simulated field experiments and actual APRB field installations showed variable results. Results from field evaluations of APRB showed mixed results from very high to negligible removal of orthophosphate-P and ammonia-N at different monitoring sites and storm events. Such variability may be due to the design of the bags, other biotic and abiotic factors and various physical factors, which are absent in the laboratory conditions. Some APRB design problems were also observed under field conditions and solutions are suggested. Overall results indicate that APRBs composed of combinations of crushed zeolite and limestone will offer an effective low maintenance and green alternative to remove dissolved nutrients from runoff and protect surface water resources from eutrophication.