Transcriptomic profiling of an evolved Yarrowia lipolytica strain: tackling hexanoic acid fermentation to increase lipid production from short-chain fatty acids.

BACKGROUND: Short-chain fatty acids (SCFAs) are cost-effective carbon sources for an affordable production of lipids. Hexanoic acid, the acid with the longest carbon chain in the SCFAs pool, is produced in anaerobic fermentation of organic residues and its use is very challenging, even inhibiting oleaginous yeasts growth. RESULTS: In this investigation, an adaptive laboratory evolution (ALE) was performed to improve Yarrowia lipolytica ACA DC 50109 tolerance to high hexanoic acid concentrations. Following ALE, the transcriptomic analysis revealed several genetic adaptations that improved the assimilation of this carbon source in the evolved strain compared to the wild type (WT). Indeed, the evolved strain presented a high expression of the up-regulated gene YALI0 E16016g, which codes for FAT1 and is related to lipid droplets formation and responsible for mobilizing long-chain acids within the cell. Strikingly, acetic acid and other carbohydrate transporters were over-expressed in the WT strain. CONCLUSIONS: A more tolerant yeast strain able to attain higher lipid content under the presence of high concentrations of hexanoic acid has been obtained. Results provided novel information regarding the assimilation of hexanoic acid in yeasts.

Elevated caproic acid production from one-stage anaerobic fermentation of organic waste and its selective recovery by electro-membrane process.

A constructed microbial consortia-based strategy to enhance caproic acid production from one-stage mixed-fermentation of glucose was developed, which incubated with acidogens (Clostridium sensu stricto 1, 11 dominated) and chain elongators (including Clostridium sensu stricto 12, Sporanaerobacter, and Caproiciproducens) acclimated from anaerobic sludge. Significant product upgrading toward caproic acid (8.31 g‧L-1) and improved substrate degradation was achieved, which can be greatly attributed to the lactic acid platform. Whereas, a small amount of caproic acid was observed in the control incubating with acidogens, with an average concentration of 2.09 g‧L-1. The strategy accelerated the shape and cooperation of the specific microbial community dominated by Clostridium sensu stricto and Caproiciproducens, which thereby contributed to caproic acid production via the fatty acid biosynthesis pathway. Moreover, the tailored electrodialysis with bipolar membrane enabled progressive up-concentration and acidification, allowing selective separation of caproic acid as an immiscible product with a purity of 82.58 % from the mixture.

Synthetic Microbial Community Members Interact to Metabolize Caproic Acid to Inhibit Potato Dry Rot Disease.

The potato dry rot disease caused by Fusarium spp. seriously reduces potato yield and threatens human health. However, potential biocontrol agents cannot guarantee the stability and activity of biocontrol. Here, 18 synthetic microbial communities of different scales were constructed, and the synthetic microbial communities with the best biocontrol effect on potato dry rot disease were screened through in vitro and in vivo experiments. The results show that the synthetic community composed of Paenibacillus amylolyticus, Pseudomonas putida, Acinetobacter calcoaceticus, Serratia proteamaculans, Actinomycetia bacterium and Bacillus subtilis has the best biocontrol activity. Metabolomics results show that Serratia protoamaculans interacts with other member strains to produce caproic acid and reduce the disease index to 38.01%. Furthermore, the mycelial growth inhibition after treatment with caproic acid was 77.54%, and flow cytometry analysis showed that the living conidia rate after treatment with caproic acid was 11.2%. This study provides potential value for the application of synthetic microbial communities in potatoes, as well as the interaction mechanisms between member strains of synthetic microbial communities.

Analysis of ester-producing performance in high-yield ethyl hexanoate yeast and the effect on metabolites in bio- enhanced Daqu, the starter for Baijiu and other traditional fermented foods.

AIMS: Ethyl hexanoate, one of the key flavor compounds in strong-flavor Baijiu. To improve the content of ethyl hexanoate in strong-flavor Baijiu, a functional strain with high yield of ethyl hexanoate was screened and its ester-producing performance was studied. METHODS AND RESULTS: Upon identification, the strain was classified as Candida sp. and designated as ZY002. Under optimal fermentation conditions, the content of ethyl hexanoate synthesized by ZY002 can be as high as 170.56 mg L-1. A fermentation test was carried out using the ZY002 strain bioaugmented Daqu to verify the role of the strain applied to Baijiu brewing. It was found that strain ZY002 could not only improve the moisture and alcohol contents of fermented grains but also diminish the presence of reducing sugar and crude starch. Furthermore, it notably amplified the abundance of flavor compounds. CONCLUSION: In this study, Candida sp. ZY002 with a high yield of ethyl hexanoate provided high-quality strain resources for the actual industrial production of Baijiu.

Caproicibacter sp. BJN0012, a potential new species isolated from cellar mud for caproic acid production from glucose.

Acids play a crucial role in enhancing the flavor of strong-aroma Baijiu, and among them, caproic acid holds significant importance in determining the flavor of the final product. However, the metabolic synthesis of caproic acid during the production process of Baijiu has received limited attention, resulting in fluctuations in caproic acid content among fermentation batches and generating production instability. Acid-producing bacteria found in the cellar mud are the primary microorganisms responsible for caproic acid synthesis, but there is a lack of research on the related microbial resources and their metabolic properties. Therefore, it is essential to identify and investigate these acid-producing microorganisms from cellar mud to ensure stable caproic acid synthesis. In this study, a unique strain was isolated from the cellar mud, exhibiting a 98.12 % similarity in its 16 S rRNA sequence and an average nucleotide identity of 79.57 % with the reference specie, together with the DNA-DNA hybridization of 23.20 % similarity, confirming the distinct species boundaries. The strain was able to produce 1.22 ± 0.55 g/L caproic acid from glucose. Through genome sequencing, annotation, and bioinformatics analysis, the complete pathway of caproic acid synthesis from glucose was elucidated, and the catalytic mechanism of the key thiolase for caproic acid synthesis was investigated. These findings provide useful fundamental data for revealing the metabolic properties of caproic acid-producing bacteria found in cellar mud.

Engineering of the Long-Main-Chain Monomer-Incorporating Polyhydroxyalkanoate Synthase PhaCAR for the Biosynthesis of Poly[(R)-3-hydroxybutyrate-co-6-hydroxyhexanoate].

Polyhydroxyalkanoate (PHA) synthases (PhaCs) are useful and versatile tools for the production of aliphatic polyesters. Here, the chimeric PHA synthase PhaCAR was engineered to increase its capacity to incorporate unusual 6-hydroxyhexanoate (6HHx) units. Mutations at positions 149 and 314 in PhaCAR were previously found to increase the incorporation of an analogous natural monomer, 3-hydroxyhexanoate (3HHx). We attempted to repurpose the mutations to produce 6HHx-containing polymers. Site-directed saturation mutants at these positions were applied for P(3HB-co-6HHx) synthesis in Escherichia coli. As a result, the N149D and F314Y mutants effectively increased the 6HHx fraction. Moreover, the pairwise NDFY mutation further increased the 6HHx fraction, which reached 22 mol %. This increase was presumably caused by altered enzyme activity rather than altered expression levels, as assessed based on immunoblot analysis. The glass transition temperature and crystallinity of P(3HB-co-6HHx) decreased as the 6HHx fraction increased.

Computer-aided design to enhance the stability of aldo-keto reductase KdAKR.

The aldo-keto reductase (AKR) KdAKR from Kluyvermyces dobzhanskii can reduce t-butyl 6-chloro-(5S)-hydroxy-3-oxohexanoate ((5S)-CHOH) to t-butyl 6-chloro-(3R,5S)-dihydroxyhexanoate ((3R,5S)-CDHH), which is the key chiral intermediate of rosuvastatin. Herein, a computer-aided design that combined the use of PROSS platform and consensus design was employed to improve the stability of a previously constructed mutant KdAKRM6 . Experimental verification revealed that S196C, T232A, V264I and V45L produced improved thermostability and activity. The "best" mutant KdAKRM10 (KdAKRM6 -S196C/T232A/V264I/V45L) was constructed by combining the four beneficial mutations, which displayed enhanced thermostability. Its T50 15 and Tm values were increased by 10.2 and 10.0°C, respectively, and half-life (t1/2 ) at 40°C was increased by 17.6 h. Additionally, KdAKRM10 demonstrated improved resistance to organic solvents compared to that of KdAKRM6 . Structural analysis revealed that the increased number of hydrogen bonds and stabilized hydrophobic core contributed to the rigidity of KdAKRM10 , thus improving its stability. The results validated the feasibility of the computer-aided design strategy in improving the stability of AKRs.

Poly-ϵ-caprolactone scaffold as staple-line reinforcement of rectal anastomosis: an experimental piglet study.

PURPOSE: Rectal anastomoses have a persisting high incidence of anastomotic leakage. This study aimed to assess whether the use of a poly-ϵ-caprolactone (PCL) scaffold as reinforcement of a circular stapled rectal anastomosis could increase tensile strength and improve healing compared to a control in a piglet model. METHOD: Twenty weaned female piglets received a stapled rectal anastomosis and were randomised to either reinforcement with PCL scaffold (intervention) or no reinforcement (control). On postoperative day five the anastomosis was subjected to a tensile strength test followed by a histological examination to evaluate the wound healing according to the Verhofstad scoring. RESULTS: The tensile strength test showed no significant difference between the two groups, but histological evaluation revealed significant impaired wound healing in the intervention group. CONCLUSION: The incorporation of a PCL scaffold into a circular stapled rectal anastomosis did not increase anastomotic tensile strength in piglets and indicated an impaired histologically assessed wound healing.

Identification of Short-Chain Fatty Acids for Predicting Preterm Birth in Cervicovaginal Fluid Using Mass Spectrometry.

Preterm birth (PTB) refers to delivery before 37 weeks of gestation. Premature neonates exhibit higher neonatal morbidity and mortality rates than term neonates; therefore, predicting and preventing PTB are important. In this study, we investigated the potential of using short-chain fatty acid (SCFA) levels, specific vaginal microbiota-derived metabolites, as a biomarker in predicting PTB using gas chromatography/mass spectrometry. Cervicovaginal fluid (CVF) was collected from 89 pregnant women (29 cases of PTB vs. 60 controls) without evidence of other clinical infections, and SCFA levels were measured. Furthermore, the PTB group was divided into two subgroups based on birth timing after CVF sampling: delivery ≤ 2 days after sampling (n = 10) and ≥2 days after sampling (n = 19). The concentrations of propionic acid, isobutyric acid, butyric acid, valeric acid, hexanoic acid, and heptanoic acid were significantly higher in the PTB group than in the term birth (TB) group (p < 0.05). In particular, the concentrations of propionic acid, isobutyric acid, hexanoic acid, and heptanoic acid were continuously higher in the PTB group than in the TB group (p < 0.05). In the delivery ≤ 2 days after sampling group, the propionic acid, isobutyric acid, hexanoic acid, and heptanoic acid levels were significantly higher than those in the other groups (p < 0.05). This study demonstrated a significant association between specific SCFAs and PTB. We propose these SCFAs as potential biomarkers for the prediction of PTB.

Effects of yeast inoculation methods on caproic acid production and microbial community during anaerobic fermentation of Chinese cabbage waste.

To provide a sufficient supply of electron donors for the synthesis of caproic acid, yeast fermentation was employed to increase ethanol production in the anaerobic fermentation of Chinese cabbage waste (CCW). The results showed that the caproic acid yield of CCW with ethanol pre-fermentation was 7750.3 mg COD/L, accounting for 50.2% of the total volatile fatty acids (TVFAs), which was 32.5% higher than that of the CCW without yeast inoculation. The synchronous fermentation of yeast and seed sludge significantly promoted the growth of butyric acid consuming bacterium Bacteroides, resulting in low yields of butyric acid and caproic acid. With yeast inoculation, substrate competition for the efficient ethanol conversion in the early stage of acidogenic fermentation inhibited the hydrolysis and acidfication. Without yeast inoculation, the rapid accumulation of TVFAs severely inhibited the growth of Bacteroidetes. In the reactor with ethanol pre-fermentation, the key microorganism for caproic acid production, Clostridium_sensu_stricto_12, was selectively enriched.

Zinc caproate: Ecofriendly synthesis, structural characterization, and antibacterial action.

Disease-causing microorganisms such as Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) are among the primary contributors to morbidity and mortality of diarrhea in humans. Considering the challenges associated with antibiotic use, including antimicrobial resistance, this study aimed to develop a novel zinc-based agent for bacterial inactivation. To this end, zinc caproate (ZnCA) was synthesized using caproic acid (CA) and zinc oxide (ZnO) in anhydrous ethanol via the solvothermal method. Structural characterization techniques, including Fourier-transform infrared spectroscopy, single crystal X-ray diffraction analysis, and nuclear magnetic resonance spectroscopy, revealed the bidentate bridging coordination of zinc atoms with CA. The resulting two-dimensional ZnCA network was found to be composed of a distinct lamellar pattern, without any evident inter-layer interactions. Powder X-ray diffraction analysis, elemental analysis, and melting point analysis confirmed that ZnCA had an average particle size of 1.320 µm, a melting point of 147.2 °C, and a purity exceeding 98 %. Remarkably, ZnCA demonstrated potent antibacterial activity against E. coli and S. aureus, which exceeded the antibacterial efficacy of ZnO. ZnCA exerted its antibacterial effects by inhibiting biofilm formation, disrupting cell membrane integrity, increasing cell membrane permeability, and altering intracellular Ca2+-Mg2+-ATPase activity. These findings highlight the potential of ZnCA as a promising antibiotic substitute for the treatment of diarrhea in humans.

Efficient caproic acid production from lignocellulosic biomass by bio-augmented mixed microorganisms.

Producing caproic acid via carboxylate platform is an environmentally-friendly approach for treating lignocellulosic agricultural waste. However, its implementation is still challenged by low product yields and selectivity. A microbiome named cellulolytic acid-producing microbiome (DCB), proficient in producing cellulolytic acid, was successfully acquired and shows promise for producing high-level caproic acid. In this study, a bioaugmentation method utilizing Clostridium kluyveri is proposed to enhance caproic acid yield of DCB using rice straw. With exogenous ethanol, bioaugmentation with Clostridium kluyveri significantly improved the caproic acid concentration and selectivity by 7 times and 4.5 times, achieving 12.9 g/L and 55.1 %, respectively. The addition of Clostridium kluyveri introduced reverse ß-oxidation pathway, a more efficient caproic acid production pathway. Meanwhile, bioaugmentation enriched the bacteria proficient in degrading straw and producing short-chain fatty acids, providing more substrates for caproic acid production. This study provides potential bioaugmentation strategies for optimizing caproic acid yield from lignocellulosic biomass.

Synthesis and Herbicidal Activity of 2-(2-Oxo-3-pyridyl-benzothiazol-6-yloxy)hexanoic Acids.

The discovery of a lead compound is fundamental to herbicide innovation, but the limited availability of valuable lead compounds has hindered their development in recent years. By utilizing the structural diversity-oriented inactive group strategy, 3-(2-pyridyl)-benzothiazol-2-one was identified as a promising lead scaffold for herbicides, starting from benzothiazole which is an inactive moiety commonly found in herbicides such as mefenacet, benazolin, benzthiazuron, and fenthiaprop-ethyl. To investigate the structure-activity relationship (SAR) of these chemicals, a series of 2-(2-oxo-3-pyridyl-benzothiazol-6-yloxy)hexanoic acid derivatives (VI01 ∼ VI28) were synthesized through classical nucleophilic SNAr reaction using halogenated pyridines and 6-methoxybenzothiazole-2-one. The chemical structures of all the title compounds were confirmed by NMR and MS analysis. Petri dish assays indicated that many compounds exhibited potent herbicidal activity against both broad-leaf weeds and grass weeds at 1.0 mg/L. The SAR analysis revealed that the presence of a trifluoromethyl group at the 5-position of pyridine is essential for herbicidal activity. Furthermore, carboxylic esters exhibit higher herbicidal activity compared to carboxylic amides and free acids, and the activity decreased with the extension of the carbon chain. The postemergence herbicidal activity of VI03 against 16 species of weeds was tested by pot experiments in a greenhouse. VI03 demonstrated comparable efficacy in controlling broadleaf weeds and superior efficacy in controlling grass weeds compared to carfentrazone ethyl. The present study has unveiled a novel molecular scaffold exhibiting remarkably potent herbicidal activity. These findings are anticipated to provide valuable insights for the advancement of new herbicides and offer an alternative approach for managing resistant weeds.

Intermediate product control in cascade reaction for one-pot production of ε-caprolactone by Escherichia coli.

ε-Caprolactone is an important non-toxic compound for polymer synthesis like polycaprolactone which has been widely used in drug delivery and degradable plastics. To meet the demand for a green economy, a bi-enzymatic cascade, consisting of an alcohol dehydrogenase (ADH) and a cyclohexanone monooxygenase (CHMO), was designed and introduced into Escherichia coli to synthesize ε-caprolactone from cyclohexanol with a self-sufficient NADPH-cofactor regeneration system. To further improve the catalytic efficiency, a carbonyl group-dependent colorimetric method using inexpensive 2,4-dinitrophenylhydrazine (DNPH) was developed for assay of cyclohexanone, an intermediate production of cascade reaction. It can be used to screen mutant strains with high catalytic efficiency from high-throughput library by detecting the absorbance value in microtiter plates (MTP) instead of gas chromatography (GC) analysis. Moreover, an RBS combinatorial library was constructed for balancing the expression of ADH and CHMO from two independent transcriptional units. After the high-throughput screening based on intermediate product control, an optimal variant with higher substrate tolerance and long-term stability was obtained from RBS combinatorial library. Through a fed-batch process, ε-caprolactone production reached 148.2 mM after 70 h of reaction under the optimized conditions, which was the highest yield achieved to date.

Evaluation of Porous (Poly(lactide-co-glycolide)-co-(ε-caprolactone)) Polyurethane for Use in Orthopedic Scaffolds.

To develop an orthopedic scaffold that could overcome the limitations of implants used in clinics, we designed poly(ester-urethane) foams and compared their properties with those of a commercial gold standard. A degradable poly(ester-urethane) was synthetized by polyaddition between a diisocyanate poly(ε-caprolactone) prepolymer (PCL di-NCO, Mn = 2400 g·mol-1) and poly(lactic-co-glycolic acid) diol (PLGA, Mn = 2200 g·mol-1) acting as a chain extender. The resulting high-molecular-weight poly(ester-urethane) (PEU, Mn = 87,000 g·mol-1) was obtained and thoroughly characterized by NMR, FTIR and SEC-MALS. The porous scaffolds were then processed using the solvent casting (SC)/particle leaching (PL) method with different NaCl crystal concentrations. The morphology, pore size and porosity of the foams were evaluated using SEM, showing interconnected pores with a uniform size of around 150 µm. The mechanical properties of the scaffolds are close to those of the human meniscus (Ey = 0.5~1 MPa). Their degradation under accelerated conditions confirms that incorporating PLGA into the scaffolds greatly accelerates their degradation rate compared to the gold-standard implant. Finally, a cytotoxicity study confirmed the absence of the cytotoxicity of the PEU, with a 90% viability of the L929 cells. These results suggest that degradable porous PLGA/PCL poly(ester-urethane) has potential in the development of meniscal implants.

The effects of two short-chain perfluoroalkyl carboxylic acids (PFCAs) on northern leopard frog (Rana pipiens) tadpole development.

Short-chain perfluoroalkyl carboxylic acids (PFCAs) have been detected in the environment globally. The presence and persistence of these compounds in the environment may lead to chronic wildlife exposure. We used northern leopard frog (Rana pipiens) tadpoles to investigate the chronic toxicity and the bioconcentration of two short-chain PFCAs, perfluorobutanoic acid (PFBA) and perfluorohexanoic acid (PFHxA). We exposed Gosner stage 25 tadpoles to PFBA and PFHxA (as individual chemicals) at nominal concentrations of 0.1, 1, 10, 100, and 1000 µg/L for 43-46 days. Tadpoles exposed to 0.1 to 100 µg/L of PFBA and PFHxA had significantly higher mean snout-to-vent lengths, mean masses, and scaled mass indexes than control tadpoles. These results indicate that exposure to short-chain PFCAs influences tadpole growth. Further investigation into the mechanism(s) causing the observed changes in tadpole growth is warranted. We observed a significantly higher proportion of males in the PFBA 1 µg/L treatment group, however further histological analyses are required to confirm visual sex identification before making concrete conclusions on the effects of PFCAs on amphibian sex ratios. PFBA concentrations in tissues were higher than PFHxA concentrations; a pattern that contrasts with previously published studies using fish, suggesting potential differences between taxa in PFBA and PFHxA bioconcentration. Bioconcentration factors were <10 L/kg wet weight, indicating low bioconcentration potential in tadpoles. Our results suggest that PFBA and PFHxA may have effects at environmentally-relevant concentrations (0.1-10 µg/L) and further investigation is required before these compounds can be deemed a "safe" alternative to their long-chain counterparts.

Developing high performance biodegradable film based on crosslinking of cellulose acetate and tannin using caprolactone.

The use of metal catalysts during the production process of cellulose acetate (CA) film can have an impact on the environment, due to their toxicity. Diphenyl phosphate (DPP) was used instead of toxic metal catalyst to react with cellulose acetate, tannin (T) and caprolactone (CL) for preparation of cellulose acetate-caprolactone-tannin (CA-CL-T) film. The results show that DPP can produce a cross-linked network structure composed of tannin, caprolactone and cellulose acetate. The maximum molecular weight reached 113,260 Da. The introduction of tannin and caprolactone into cellulose acetate caused the resulting CA-CL-T film acquire excellent strengthening/toughening effect, in which a tensile strength of 23 MPa and elongation at break of 18 % were attained. More importantly, the resistance of the film to UV radiation was significantly improved with the tannin addition, which was corroborated by the CA-CL-T film still exhibiting a tensile strength of 13 MPa and elongation at break around 13 % after continuous exposure to UV radiation for 9 days. On the other hand, the insertion of caprolactone provoked enhancement of the overall moisture resistance. Five days treatment of the films with Penicillium sp. induced gradual drop in quality, indicating the CA-CL-T film show response to biodegradation. In all, the effective crosslinking between the components of the developed material is responsible for the acquired set of these distinct characteristics.

Medium chain Fatty acids production from Food Waste via homolactic fermentation and lactate/ethanol elongation: Electron balance and thermodynamic assessment.

This study explored the potential of Food Waste (FW) extract as a suitable substrate for Medium Chain Fatty Acids (MCFAs) production, in a single-phase reactor, where both fermentation and Chain Elongation (CE) processes occurred simultaneously. A continuous experiment was conducted with an Organic Loading Rate (OLR) = 20 gCOD L-1 d-1 and was fed in batch mode twice a week with pH = 6. In addition, four batch tests were performed, to assess the effects on the MCFAs production of caproate inhibition, hydrogen partial pressure (PH2) and different lactate/acetate ratios. Thermodynamics and electron flux were calculated to gain insights into the process pathways. Due to the presence of aminoacids, fermentation was mostly homolactic and both lactate and ethanol were produced as Electron Donors (EDs); the average MCFAs production efficiency was âˆ¼ 12 %, although after 4 weeks the elongation process was halted, resulting in EDs accumulation. This occurred regardless of inoculum selection and the presence of caproate as a possible inhibitor, suggesting that EDs accumulation was due to the elongation process kinetics being slower than those of the fermentation step, thus calling for a longer Hydraulic Retention Time (HRT). It's worth noting that lactate was prevalently self-elongated to butyrate, whereas ethanol elongation only took place after lactate depletion, but was more efficient since it required other Electron Acceptors (EAs) such as butyrate, propionate or valerate. Moreover, the selected pH limited the acrylate pathway to a reasonable extent, whereas the high PH2 prevented both ethanol and lactate oxydation to acetate.

Antioxidant potency and inhibitory mechanism of curcumin and its derivatives in oleogel and emulgel produced by linseed oil.

The antioxidant activity of curcumin and curcumin esters was investigated in oleogel and emulgel produced by linseed oil. In the initiation phase, curcumin acetate at 1.086 mM concentration showed the highest antioxidant activity in linseed oil, while curcumin at 2.172 mM concentration showed the highest antioxidant activity in oleogel. In the propagation phase, curcumin and curcumin esters exhibited higher efficiency in linseed oil samples than those of oleogel samples. In the initiation phase, curcumin hexanoate showed higher antioxidant activity than curcumin acetate and curcumin butyrate, while curcumin hexanoate showed lower efficiency than curcumin acetate and curcumin butyrate in the propagation phase. Investigating the mechanism of action of curcumin and curcumin esters in oleogel and emulgel showed that in addition to inhibiting peroxyl radicals, curcumin and curcumin esters were likely to pro-oxidatively attack hydroperoxides. Also, curcumin and curcumin esters radicals were likely to attack lipid substrates in these systems.

A comparative review of the toxicity mechanisms of perfluorohexanoic acid (PFHxA) and perfluorohexanesulphonic acid (PFHxS) in fish.

Industrial and consumer goods contain diverse perfluoroalkyl substances (PFAS). These substances, like perfluorohexanoic acid (PFHxA) and perfluorohexanesulphonic acid (PFHxS), are under increased scrutiny due to their potential toxicity to aquatic organisms. However, our understanding of their biological impacts and mechanisms of action remains limited. The objectives of this review were to compare data for levels of PFHxA and PFHxS in aquatic environments and fish tissues, as well as toxicity mechanisms related to morphological, endocrine, metabolic, and behavioral endpoints. A computational assessment was also performed to identify putative mechanisms of toxicity and to characterize exposure biomarkers. Studies have shown that both PFHxA and PFHxS residues are present in diverse marine and freshwater fish tissues, suggesting the importance of monitoring these PFAS in aquatic organisms. In fish tissues, these chemicals have been reported to be as high as 37.5 ng/g for PFHxA and 1290 ng/g for PFHxS, but their persistence in aquatic environments and degradation in tissues requires further study. In terms of mechanisms of toxicity, both oxidative stress and endocrine disruption have been reported. Based on evidence for endocrine disruption, we modeled interactions of estrogen and androgen receptors of several fish species with PFHxA and PFHxS. Molecular docking revealed that PFHxS has a stronger affinity for interacting with the estrogen and androgen receptors of fish compared to PFHxA and that estrogen and androgen receptors of fathead minnow, zebrafish, Atlantic salmon, and largemouth bass show comparable binding affinities for each chemical except for salmon Esr2b, which was predicted to have lower affinity for PFHxA relative to Esr2a. While mechanistic data are lacking in fish in general for these chemicals, a computational approach revealed that PFHxA can perturb the endocrine system, nervous system, and is linked to changes in kidney and liver weight. Proteins associated with PFHxA and PFHxS exposures in fish include those related to lipid and glucose regulation, reproductive proteins like KISS metastasis suppressor, and proteins associated with the immune system (specifically RAG1, RAG2), all of which are potential biomarkers of exposure. Taken together, we synthesize current knowledge regarding the environmental fate and ecotoxicology of PFHxA/PFHxS in fish species.