Synthetic diamonds as ionisation chamber radiation detectors in biological environments.

Synthetic diamonds with nitrogen concentrations higher than previously reported in the literature are found to operate very effectively as alpha-particle detectors, as well as detectors for gamma radiation, when operated as ionisation chambers. Certain of the specimens exhibited extensive linear response characteristics when subjected to either alpha particles or gamma radiation of various dose rates. For alpha particles, the response of the detectors at constant particle flux was also found to increase linearly with increasing alpha-particle energy. Unlike previously reported investigations, however, the variation in the response of the synthetic stones to gamma radiation as a function of time was found to be not only more rapid but also to be virtually unaffected by illumination with intense white light.

Occurrence of airborne silicon carbide fibers during industrial production of silicon carbide.

Airborne dust from the production of silicon carbide has been analyzed for particle morphology and composition. Fibers of alpha silicon carbide were identified by scanning electron microscopy (SEM) combined with energy dispersive X-ray spectrometry (EDS) and transmission electron microscopy (TEM) with selected area electron diffraction techniques (SAED). Micrographs taken at high magnification revealed several stacking periods along the fiber axis, and one or more of the polytypes 2H, 4H, or 6H could be distinguished. Preliminary investigations applying SEM showed that 80% of the fibers had diameters of less than 0.5 micron and a length greater than 5 micron. Fiber concentrations were examined by the counting of stationary and personal samples in an optical phase contrast microscope. The fiber levels in the three plants investigated were low and less than 1 fiber/cc of air (10(6) fibers/m3). Dust samples from the handling of raw material, including recycled material, contained up to 5 fibers/cc (5 X 10(6) fibers/m3).

Pulmonary effects of exposures in silicon carbide manufacturing.

Chest x rays, smoking histories, and pulmonary function tests were obtained for 171 men employed in the manufacturing of silicon carbide. A lifetime exposure to respirable particulates (organic and inorganic fractions) and sulphur dioxide was estimated for each worker. Chest x ray abnormalities were related to respirable particulates (round opacities) and to age and smoking (linear opacities). Pulmonary function was affected by respirable particulates (FVC) and by sulphur dioxide and smoking (FEV1). Pleural thickening was related to age. No exposures exceeded the relevant standards; we therefore conclude that the current standards do not provide protection against injurious pulmonary effects, at least in this industry.