An alternative parameter to characterize biogas materials: Available carbon-nitrogen ratio.

Available carbon-nitrogen ratio (AC/N) was proposed as an alternative parameter for evaluating the potential of biogas materials in this paper. In the calculation of AC/N ratio, only the carbon that could be effectively utilized in anaerobic digestion (AD) process is included. Compared with total C/N, AC/N is particularly more suitable for the characterization of biogas materials rich in recalcitrant components. Nine common biogas materials were selected and a series of semi-continuous tests for up to 110days were carried out to investigate the source of available carbon and the relationship between AC/N and the stability of AD process. The results showed that only the carbon existing in proteins, sugars, fat and hemicelluose should be considered as available carbon for anaerobic microbes. Besides, the optimal AC/N for semi-continuous AD process was preliminarily determined to be 11-15. Taken together, our results demonstrate that AC/N is more effective than total C/N in the evaluation of the potential performance of AD process.

Occupational Exposure to Respirable Dust, Respirable Crystalline Silica and Diesel Engine Exhaust Emissions in the London Tunnelling Environment.

Personal 8-h shift exposure to respirable dust, diesel engine exhaust emissions (DEEE) (as respirable elemental carbon), and respirable crystalline silica of workers involved in constructing an underground metro railway tunnel was assessed. Black carbon (BC) concentrations were also assessed using a MicroAeth AE51. During sprayed concrete lining (SCL) activities in the tunnel, the geometric mean (GM) respirable dust exposure level was 0.91mg m(-3), with the highest exposure measured on a back-up sprayer (3.20mg m(-3)). The GM respirable crystalline silica concentration for SCL workers was 0.03mg m(-3), with the highest measurement also for the back-up sprayer (0.24mg m(-3)). During tunnel boring machine (TBM) activities, the GM respirable dust concentration was 0.54mg m(-3). The GM respirable elemental carbon concentration for all the TBM operators was 18 µg m(-3); with the highest concentration measured on a segment lifter. The BC concentrations were higher in the SCL environment in comparison to the TBM environment (daily GM 18-54 µg m(-3) versus 3-6 µg m(-3)). This small-scale monitoring campaign provides additional personal data on exposures experienced by underground tunnel construction workers.

Fully automated synthesis of ¹¹C-acetate as tumor PET tracer by simple modified solid-phase extraction purification.

INTRODUCTION: Automated synthesis of (11)C-acetate ((11)C-AC) as the most commonly used radioactive fatty acid tracer is performed by a simple, rapid, and modified solid-phase extraction (SPE) purification. METHODS: Automated synthesis of (11)C-AC was implemented by carboxylation reaction of MeMgBr on a polyethylene Teflon loop ring with (11)C-CO2, followed by acidic hydrolysis with acid and SCX cartridge, and purification on SCX, AG11A8 and C18 SPE cartridges using a commercially available (11)C-tracer synthesizer. Quality control test and animals positron emission tomography (PET) imaging were also carried out. RESULTS: A high and reproducible decay-uncorrected radiochemical yield of (41.0 ± 4.6)% (n=10) was obtained from (11)C-CO2 within the whole synthesis time about 8 min. The radiochemical purity of (11)C-AC was over 95% by high-performance liquid chromatography (HPLC) analysis. Quality control test and PET imaging showed that (11)C-AC injection produced by the simple SPE procedure was safe and efficient, and was in agreement with the current Chinese radiopharmaceutical quality control guidelines. CONCLUSION: The novel, simple, and rapid method is readily adapted to the fully automated synthesis of (11)C-AC on several existing commercial synthesis module. The method can be used routinely to produce (11)C-AC for preclinical and clinical studies with PET imaging.

On the use of Kinetex(™) -C(18) core-shell 2.6 µm stationary phase to the multiclass determination of antibiotics.

Fast and accurate analysis is a prerequisite in all analytical fields especially in food, biological, pharmaceutical, and environmental samples. The new trend of ultra performance liquid chromatography (LC) has the main drawback of expensive instrumentation, which can't be easily found in low-budget analytical laboratories. The evolution of core shell technology has contributed to this direction, since ultra high efficiency can be achieved on common LC instrument platforms. Herein the novel core shell analytical column, KINETEX (™) 2.6 µm, (150 mm × 4.6 mm) was comparatively studied against two conventional reversed-phase silica-based and one monolithic column. Eight antimicrobial agents representing two different classes: penicillins and amphenicols, were separated using a typical 400 bar high performance liquid chromatography (HPLC) equipment. Comparison of column performance was carried out by calculation of the number of theoretical plates N, the tailing factor T(f) , the relative retention time RRT, the retention factor k, the resolution factor R(s) , and the precision of the retention time and peak area. Optimal chromatographic conditions were used to validate the method. Its applicability was proven by the analysis of veterinary drug formulations. The examined antibiotics were well resolved within 17 min. Limit of quantitation values were 25.9 ng for amoxicillin, 14.1 ng for ampicillin, 41.6 ng for thiamphenicol, 9.6 ng for oxacillin, 23.5 ng for florfenicol, 26.7 for cloxacillin, 23.5 ng for chloramphenicol and 42.3 ng for dicloxacillin for 20 µL injection volume. The developed method can be easily and readily transferred to any laboratory.

An ecotoxicological approach for hazard identification of energy ash.

Within the EU, ash should be classified by its inherent hazardous effects under criterion H-14 (ecotoxic) in the Directive on waste (2008/98/EC). Today, however, there are no harmonized quantitative criterions for such a classification, but it is stated that biological test systems can be used. In this study seven ash materials were leached and characterized, both biologically and chemically. The objectives were to evaluate if (a) clear concentration-response relationships could be achieved for the selected toxicity tests (bacteria, algae, crustacean and fish), (b) some test(s) are generally more sensitive and (c) the toxic responses were consistent with the chemical analyzes. Interestingly, our results indicate that high concentrations of non-hazardous components (Ca, K) influenced the toxicity of almost all ash eluates, whereas hazardous components (e.g. Zn, Pb) only influenced the toxicity of the eluates ranked as most hazardous. If considering both hazardous and non-hazardous substances, the observed toxic responses were relatively consistent with the chemical analyzes. Our results further showed that the (sub)chronic tests were much more sensitive than the acute tests. However, the use of extrapolation factors to compensate for using the less sensitive acute tests will likely lead to either over- or underestimations of toxicity. Our recommendation is therefore that classification of waste according to H-14 should be based on (sub)chronic test data. Finally, given that treatment of the eluates prior to toxicity testing has a major significance on the concentration and speciation of released substances, further studies are needed in order to propose a relevant testing scheme.

Bending characteristics of polymethylmethacrylate columns, connecting bars of carbon fiber, titanium, and stainless steel used in external skeletal fixation and an acrylic interface.

OBJECTIVE: To (1) mechanically evaluate polymethylmethacrylate (PMMA) columns of various sizes and compare them to connecting bar materials (carbon fiber composite, titanium, stainless steel) and (2) compare the properties of an intact PMMA column to those of an acrylic interface. STUDY DESIGN: Experimental mechanical study. SAMPLE POPULATION: Experiment 1: 6 groups of 6 specimens each; experiment 2: 2 groups of 12 specimens each. METHODS: All specimens were tested in 3-point bending. Stiffness, yield strength, and ultimate strength values were calculated for each specimen. RESULTS: PMMA 1 columns (23.25 mm) compared favorably to titanium or stainless-steel bars. PMMA 3 columns (30.15 mm) and carbon fiber bars had similar yield strength but PMMA 3 columns were less stiff than carbon fiber bars. PMMA 3 columns had lower bending modulus and a higher variability in their mechanical properties than PMMA 1 or PMMA 2 (25.64 mm) columns. Acrylic interface specimens were less strong but as stiff as intact specimens. CONCLUSION: An acrylic interface was easily created and had acceptable biomechanical characteristics. CLINICAL RELEVANCE: PMMA 2 and PMMA 3 columns are not recommended for clinical use at this time. Further tests are needed to analyze an acrylic patch in a more clinically relevant loading model.

Performance appraisal of industrial waste incineration bottom ash as controlled low-strength material.

Controlled low-strength material (CLSM) is slurry made by mixing sand, cement, ash, and water. It is primarily used as a replacement for soil and structural fillings. This paper presents the findings of a preliminary investigation carried out on the performance of industrial waste incineration bottom ash as CLSM. CLSM mixes were designed using industrial waste incineration bottom ash, and cement. Tests for density, setting time, bleed, and compressive strength on cubes under various curing conditions, corrosivity, and leaching of heavy metals and salts were carried out on the CLSM mixtures, and the results discussed. Compressive strength for the designed CLSM mixtures ranged from 0.1 to 1.7 MPa. It is shown that the variations in curing conditions have less influence on the compressive strength of CLSM at high values of water to cement ratio (w/c), but low values of w/c influences the strength of CLSM. The CLSM produced does not exhibit corrosive characters as evidenced by pH. Leaching of heavy metals and salts is higher in bleed than in leachate collected from hardened CLSM. Cement reduces the leaching of Boron in bleed. It is concluded that there is good potential for the use of industrial waste incineration bottom ash in CLSM.

The potential of Festuca rubra and Calamagrostis epigejos for the revegetation of fly ash deposits.

Two grass species, Festuca rubra (sown) and Calamagrostis epigejos (naturally recolonised), were studied at two fly ash deposit lagoons, weathered 5 (L1) and 13 years (L2). Both species were assessed in terms of their invasive ability, photosynthetic efficiency, trace elements accumulation, and damage symptoms, while the characteristics of the habitat were assessed in terms of trace element content, and the pH and EC of the ash. In the ash weathered for 5 and 13 years, B and Mn concentrations fell within the normal range for soils, while there was an As, Mo and Cu excess, and Se and Zn deficit. There was no difference in the photosynthetic efficiency (ns) of the C. epigejos populations at the different-aged ash lagoons, but differences were found between the populations of F. rubra (P<0.001). F. rubra displayed damage symptoms, in the form of leaf tip chlorosis and necrosis, and wilting seedlings--a result of B accumulation in toxic concentrations and a Cu and Mn deficit. After 13 years the sown F. rubra remained over 9.5% of the ash lagoon's area (L2), while over the same period the naturally recolonised C. epigejos had overgrown 87.5% of the area. The greater colonisation and survival potential of C. epigejos is a result of multiple tolerance to the conditions at ash deposits and of the competitive ability of this species to dominate the colonised habitat. Therefore, characteristics of naturally colonised species can be used for modelling future actions of biological restoration of fly ash deposits aimed at binding the ash with minimal investment (the short-term aim), and for providing conditions for revegetation, and shortening the successive phases in the revegetation of ash deposits after the closure of thermal plants (the long-term aim).

[Influence of sterilization treatments on continuous carbon-fiber reinforced polyolefin composite].

OBJECTIVE: To evaluate the influence of sterilization treatment on continuous carbon-fiber reinforced polyolefin composite (CFRP) so as to provide experimental reference for selection of sterilization method for CFRP. METHODS: Seventy bars of CFRP were divided into 7 equal groups to undergo sterilization by autoclave, 2% glutaraldehyde soaking, 75% alcohol soaking, ethylene oxide sterilization, and Co-60 gamma ray irradiation of the dosages 11 kGy, 25 kGy, and 18 kGy respectively, and another 10 bars were used as blank controls. Then the bars underwent three-point bending test and longitudinal compression test so as to measure the biomechanical changes after sterilization treatment, including the maximum load, ultimate strength, and elastic modulus. RESULTS: Three-point bending test showed that the levels of maximum load of the all experimental groups were lower than that of the control group, however, only those of the 3 Co-60 irradiation groups were significantly lower than that of the control group and that Co-60 radiation lowered the level of maximum load dose-dependently; and that the levels of ultimate strength of all the all experimental groups were lower than that of the control group, however, only those of the 3 Co-60 groups were significantly lower than that of the control group and that the higher the dosage of Co-60 radiation the lower the level of ultimate strength, however, not dose-dependently. The elastic modulus of the Co-60 25 KGy group was significantly higher than that of the control group, and there was no significant difference in the level of ultimate strength among the other groups. Longitudinal compression test showed that the levels of maximum load and ultimate strength of the 3 Co-60 irradiation groups, autoclave group, and circular ethylene groups were significantly lower than that of the control group, and there was no significant difference in elastic modulus among different groups. CONCLUSION: During sterilized package of CFRP products produced in quantity autoclave sterilization and Co-60 gamma ray irradiation sterilization should be avoided. Ethylene oxide is proposed as the best sterilization method. If gamma ray irradiation is to be used further technology improvement is necessary.

Evaluating farm performance using agri-environmental indicators: recent experiences for nitrogen management in The Netherlands.

Intensive agriculture, characterized by high inputs, has serious implications on the environment. Monitoring and evaluation of projects aiming at designing, testing and applying more sustainable practices require instruments to asses agronomic as well as environmental performance. Guidelines for Good Agricultural Practice (GAP) or Good Farming Practice (GFP) define sustainable practices but give limited insight into their environmental performance. Agri-environmental indicators (AEIs) provide information on environmental as well as agronomic performance, which allows them to serve as analytical instruments in research and provide thresholds for legislation purposes. Effective AEIs are quantifiable and scientifically sound, relevant, acceptable to target groups, easy to interpret and cost-effective. This paper discusses application of four AEIs for nitrogen (N) management in three Dutch research projects: 'De Marke', 'Cows and Opportunities' and 'Farming with a future'. 'De Marke' applied Nitrogen Surplus and Groundwater Nitrate Concentration in the design and testing of environmentally sound dairy systems. 'Cows and Opportunities', testing and disseminating dairy systems designed at 'De Marke', mainly applied Nitrogen Surplus, while 'Farming with a future' used Nitrogen Surplus, Groundwater Nitrate Concentration and Residual Mineral Soil Nitrogen to support arable farmers in complying with Dutch legislation (MINAS). Nitrogen Surplus is quantifiable, appealing and easy to interpret, but lacks scientific soundness or a good relationship with groundwater quality. Nitrogen Use Efficiency is sensitive to changes in management, while Residual Mineral Soil Nitrogen is appealing and cheap, but has difficulties in scaling. Groundwater Nitrate Concentration lacks clear rules for sampling, is labor consuming, expensive and mainly used in combination with other indicators. AEIs enhanced improvements in N management by facilitating (i) definition of project goals, (ii) design of desired systems, (iii) evaluation of applied systems and (iv) improving effective communication. AEI applications in other countries show a similar pattern as found in The Netherlands. Limitations to AEI application relate to inconsistencies between different indicators, heterogeneity of soil characteristics and linkages of N, carbon and water management. AEIs should be applied in an integrated evaluation, at a scale that reflects the farm's spatial variability. Simple AEIs like Nitrogen Surplus should be supported by other indicators and/or model calculations. The paper concludes that AEIs proved their value in design, implementation and testing of farming systems, but they should be used with care, always keeping in mind that indicators are simplifications of complex and variable processes.

Predicting water quality impaired stream segments using landscape-scale data and a regional geostatistical model: a case study in Maryland.

In the United States, probability-based water quality surveys are typically used to meet the requirements of Section 305(b) of the Clean Water Act. The survey design allows an inference to be generated concerning regional stream condition, but it cannot be used to identify water quality impaired stream segments. Therefore, a rapid and cost-efficient method is needed to locate potentially impaired stream segments throughout large areas. We fit a set of geostatistical models to 312 samples of dissolved organic carbon (DOC) collected in 1996 for the Maryland Biological Stream Survey using coarse-scale watershed characteristics. The models were developed using two distance measures, straight-line distance (SLD) and weighted asymmetric hydrologic distance (WAHD). We used the Corrected Spatial Akaike Information Criterion and the mean square prediction error to compare models. The SLD models predicted more variability in DOC than models based on WAHD for every autocovariance model except the spherical model. The SLD model based on the Mariah autocovariance model showed the best fit (r(2) = 0.72). DOC demonstrated a positive relationship with the watershed attributes percent water, percent wetlands, and mean minimum temperature, but was negatively correlated to percent felsic rock type. We used universal kriging to generate predictions and prediction variances for 3083 stream segments throughout Maryland. The model predicted that 90.2% of stream kilometers had DOC values less than 5 mg/l, 6.7% were between 5 and 8 mg/l, and 3.1% of streams produced values greater than 8 mg/l. The geostatistical model generated more accurate DOC predictions than previous models, but did not fit the data equally well throughout the state. Consequently, it may be necessary to develop more than one geostatistical model to predict stream DOC throughout Maryland. Our methodology is an improvement over previous methods because additional field sampling is not necessary, inferences about regional stream condition can be made, and it can be used to locate potentially impaired stream segments. Further, the model results can be displayed visually, which allows results to be presented to a wide variety of audiences easily.

MRI compatible electrodes for the induction of amygdala kindling in rats.

The rat electrical kindling model has been widely utilized in epilepsy research. This study aimed to identify the optimum "MRI compatible" bipolar stimulating and recording electrodes to enable serial MRI acquisition in this model. Two types of custom-made electrodes (gold and carbon) were compared with commercial platinum-iridium alloy electrodes for suitability based on size, effect on image quality and kindling induction. The custom-made gold electrodes, based on these parameters, were found to be most suitable. These electrodes enable the study of epileptogenesis utilizing MRI in this model of temporal lobe epilepsy (TLE).

Effect of surface modification of an engineered activated carbon on the sorption of 2,4-dichlorophenoxy acetic acid and benazolin from water.

The performance of a conventional (F400) and a surface modified activated carbon (F400AN) has been investigated for the sorption of benazolin and 2,4-dichlorophenoxy acetic acid (2,4-D) from water. It was observed that the modified carbon, F400AN, which was obtained by annealing the conventional sample had a higher BET surface area (960 m2 g(-1) compared to 790 m2 g(-1)) and it had a higher proportion of micropores. This was attributed to the loss of oxygen containing functional groups during the thermal treatment. Zeta potential and pH titration measurements also showed that acidic functionality had been lost on the F400AN sample. The adsorption data were analysed and were fitted well using the Langmuir isotherm. The modified carbon marginally out-performed the conventional activated carbon for sorption of these two herbicides. Thermodynamic parameters (DeltaG0, DeltaH0, and DeltaS0) were determined and their values indicated that the sorption process was spontaneous and endothermic for both herbicides. A pseudo-second-order kinetic model was employed for analysing the kinetic data. It was concluded that the herbicide sorption process was controlled by a film diffusion mechanism.

Ultrastructure at carbon fiber microelectrode implantation sites after acute voltammetric measurements in the striatum of anesthetized rats.

This work seeks to establish the feasibility of characterizing the ultrastructure of brain tissue disruption associated with the implantation of carbon fiber voltammetric microelectrodes. In vivo recording was performed by fast scan cyclic voltammetry in conjunction with carbon fiber microelectrodes (3.5 microm radius) in the striatum of rats anesthetized with chloral hydrate. After 4 h of in vivo recording, the microelectrodes were removed from the brain and the animals underwent intracardial perfusion. Brain tissue was collected and sectioned in the horizontal plane perpendicular to the axis of the microelectrodes. With microelectrodes of a conventional single barreled design, the tissue tracks were often too small to be followed by light microscopy to the point of deepest penetration, which would correspond to the implantation site of the carbon fiber itself. The enlarged tissue tracks formed by the implantation of double barreled electrodes, however, could be followed to their termination by light microscopy. Anatomical mapping was used to identify the fields laying 100 microm deeper than the deepest trace of such tracks. Electron microscopy of these fields revealed a spot of tissue damage presumed to be associated with the implantation site of the carbon fiber microelectrode. The spot of maximal tissue damage had a radius of 2.5 microm and was surrounded by an annular region with a width of 4 microm that contained a mix of healthy and damaged elements. Beyond this annular region, i.e. beyond 6.5 microm from the center of the spot of maximal damage, signs of microelectrode-associated damage were rare and consisted primarily of neurons with darkened cytoplasm.

A method for direct thalamic stimulation in fMRI studies using a glass-coated carbon fiber electrode.

Recent fMRI studies are of interest in exploring long-range interactions between different brain structures and the functional activation of specific brain regions by known neuroanatomical pathways. One of the experimental approaches requires the invasive implantation of an intracranial electrode to excite specific brain structures. In the present report, we describe a procedure for the production of a glass-coated carbon fiber electrode and the use of this electrode for direct activation of the brain in fMRI studies. The glass-coated carbon fiber microelectrode was implanted in the medial thalamus of anaesthetized rats and T2*-weighted gradient echo images in the sagittal plane obtained on a 4.7 T system (Biospec BMT 47/40) during electrical stimulation of the medial thalamus. The image quality obtained using this electrode was acceptable without reduction of the signal-to-noise ratio and image distortion. Cross-correlation analysis showed that the signal intensities of activated areas in the ipsilateral anterior cingulate cortex were significantly increased by about 4-5% during medial thalamus stimulation. The present study shows that glass-coated carbon fiber electrodes are suitable for fMRI studies and can be used to investigate functional thalamocingulate activation.

Statistical comparison of diesel particulate matter measurement methods.

Four methods are used to quantify diesel particulate matter (DPM) in the mine environment: respirable combustible dust sampling (RCD), size selective sampling with gravimetric analysis (SSG), respirable dust sampling with elemental carbon (EC) analysis, and respirable dust sampling with total carbon (TC) analysis. The authors assembled data from three underground mine studies to statistically compare these methods. The sampling protocol used in each study was similar. For all the four methods, samples were collected in triplicate at three locations-upwind and downwind of the diesel scoop and on the scoop. The methods were compared with respect to their precision, selectivity, sensitivity, and LOD, as well as their limitations in measuring DPM concentrations. This constitutes a meta-analysis of the available data and provides information over a broader range of mining conditions and DPM concentrations than any of the individual studies. The weighing imprecision for the SSG method is almost twice that for the RCD technique. The imprecision of the EC and TC methods are a function of the mass loading, and EC has a lower imprecision than TC. The EC method was used as the reference "gold standard" against which the other methods were evaluated. The RCD, SSG, and TC methods exhibited substantial levels of interference, leading to much higher minimum concentrations that can be measured by these methods. Of the three, the SSG method has the highest level of interference, primarily from nondiesel material that is collected in the <0.8 microm size range.

Amperometry and cyclic voltammetry with carbon fiber microelectrodes at single cells.

Amperometry and cyclic voltammetry are two electrochemical techniques that enable the detection of electroactive neurotransmitters that are released from single cells. These techniques have provided the first chemical view of the events that occur during exocytosis. This unit describes the isolation of several cell types known for their exocytotic properties, the fabrication and calibration of carbon fiber microelectrodes, as well as some of the equipment and software requirements for obtaining electrochemically generated data.

Development and certification of a coal fly ash certified reference material for selected polycyclic aromatic hydrocarbons.

The development and certification of a coal fly ash certified reference material (CRM) for polycyclic aromatic hydrocarbons (PAH) is described; this is the first natural matrix CRM for organic environmental analysis in China. The homogeneity and stability of this material have been tested by HPLC. The concentrations of several PAH were determined by use of two independent, different methods--solvent extraction-HPLC analysis with UV detection coupled with fluorescence detection (FLD) and solvent extraction, isolation with a silica column, and GC analysis with flame ionization detection (FID). Five certified values were determined: phenanthrene 7.1 +/- 2.6 microg g(-1), anthracene 2.0 +/- 0.8 microg g(-1), fluoranthene 7.4 +/- 1.9 microg g(-1), pyrene 7 +/- 2 microg g(-1), and benzo[a]pyrene 1.3 +/- 0.3 microg g(-1). Reference values for several other PAH are also suggested.

Can voltammetry measure nitrogen monoxide (NO) and/or nitrites?

Recently, voltammetry with carbon fibre electrodes (CFE) has been implemented for real time measurement of nitrogen monoxide (NO) indicating that it is oxidised at the potential value of nitrites, approximately +700 mV. In contrast, here we show that modified CFE can monitor NO at oxidation potentials different than that of nitrites, i.e. +550 mV. Indeed, at +550 mV a significant increase of amperometric current levels was obtained when NO but not nitrites, were added to a phosphate buffer saline solution (PBS). Differential pulse voltammetry (DPV) supports these findings as two oxidation peaks were obtained when examining air preserved NO; peak 1 at +550 mV and peak 2 at +700 mV, respectively. In contrast, only peak 2 was monitored when nitrites or a solution of NO oxidised in air was added to PBS. Biological support to these in vitro data comes from the observation that the relaxation of an adrenaline-contracted aortic ring produced via addition of NO is concomitant with peak 1 at +550 mV. The relaxation is almost completed before the appearance of peak 2 at +700 mV. Furthermore, in vivo experiments performed in the striatum of rats show that the amperometric signal monitored at +550 mV is responsive to glutamatergic stimulation or inhibition of NO synthase.