Environmental burdens in the management of end-of-life cathode ray tubes.

We compared the environmental burdens in the management of end-of life cathode ray tubes (CRTs) within two frameworks according to the different technologies of the production of televisions/monitors. In the first case, CRT recycling is addressed to the recovery of the panel and funnel glass for the manufacturing of new CRT screens. In the second case, where flat screen technology has replaced that of CRT, the recycling is addressed to the recovery of the glass cullet and lead for other applications. The impacts were evaluated according to the problem-oriented methodology of the Institute of Environmental Sciences, Leiden University, Leiden, The Netherlands. Our data confirm that in both cases, the recycling treatment allows benefits to be gained for the environment through the recovery of the secondary raw materials. These benefits are higher for the "CRT technology" framework (1 kg CO2 saved per CRT) than for the "flat screen technology" (0.9 kg CO2 saved, per CRT, as the highest possible), mainly due to the high energy consumption for lead separation from the funnel glass. Furthermore, the recovery of yttrium from the fluorescent powders that are a residue of the recycling treatment would further improve the CO2 credit for both the frameworks considered, which would provide a further saving of about 0.75 kg CO2 per CRT, net of the energy and raw materials needed for the recovery. Overall, this study confirms that, even with a change in the destination of the recovered materials, the recycling processes provide a benefit for the environment: indeed the higher loads for the environment are balanced by avoiding the primary production of the recovered materials.

Cathode ray tube (CRT) recycling: current capabilities in China and research progress.

It is estimated that approximately 6,000,000 scrap TVs and 10,000,000 personal computers are generated each year in China. Cathode ray tubes (CRTs) from these machines consist of 85% glass (65% panel, 30% funnel and 5% neck glass). The leaded glass (funnel-24%, neck-30%) may seriously pollute the environment if it is not properly disposed of. In this paper, the past, current and future status of CRT dismantling technologies as well as the CRT glass recycling situation in China are presented and discussed. Recycling technology for waste CRTs in China is still immature. While the conventional CRT dismantling technologies have disadvantages from both economic and environmental viewpoints, some of the new and emerging treatments such as automatic optical sorting facilities that have been applied in developed countries offer advantages, and therefore should be transferred to China in the next few years to solve the CRT pre-processing problem. Meanwhile, because the demand for CRT glass closed-loop recycling is extremely limited, the authorities should take effective measures to improve CRT glass recycling rates and to facilitate a match to local conditions. Moreover, we also provide a broad review of the research developments in recycling techniques for CRT cullet. The challenge for the future is to transfer these environmentally friendly and energy-saving technologies into practice.