Quantitative analysis of solid dosage forms of cefixime using Raman spectroscopy.

Quantification of antibiotics is of significant importance because of their use in the prevention and treatment of different diseases. Cefixime (CEF) is a cephalosporin antibiotic that is used against bacterial infections. In the present study, Raman spectroscopy has been applied for the identification and quantification of Raman spectral features of cefixime with different concentrations of Active Pharmaceutical Ingredient (API) and excipients in solid dosage forms. The changes in Raman spectral features of API and excipients in the solid dosage forms of cefixime were studied and Raman peaks were assigned based on the literature. Multivariate data analysis techniques including the Principal Component Analysis (PCA) and Partial Least Squares Regression analysis (PLSR) have been performed for the qualitative and quantitative analysis of solid dosage forms of cefixime. PCA was found helpful in differentiating all the Raman spectral data associated with the different solid dosage forms of cefixime. The coefficient of determination (R2), mean absolute error (MAE), and mean relative error (MRE) for the calibration data-set were 0.99, 0.72, and 0.01 respectively and for the validation data-set were 0.99, 3.15, and 0.02 respectively, that shows the performance of the model. The root mean square error of calibration (RMSEC) and root mean square error of prediction (RMSEP) were found to be 0.56 mg and 3.13 mg respectively.

A Comparative Solubility Enhancement Study of Cefixime Trihydrate Using Different Dispersion Techniques.

This study aimed to investigate the effect of different polymers (polyethylene glycol 4000 and 6000 and Soluplus®) on the enhancement of solubility, dissolution, and stability of cefixime trihydrate as a selected class II model drug. Different solid dispersions have been prepared using conventional methods and supercritical fluid technology. The effect of co-solvent incorporation in supercritical fluid technology was also studied. Physicochemical properties for solid dispersions were investigated using Fourier transform infrared analysis, differential scanning calorimetry, thermogravimetric analysis, powder X-ray diffraction, and scanning electron microscopy. The solubility of the prepared solid dispersions increased except for those prepared with Soluplus® using supercritical fluid technology without co-solvent. The best enhancement in the release profile was recorded by Soluplus®-based solid dispersions prepared using a conventional method. The conventional methods of preparation and the presence of co-solvent in supercritical fluid technology converted cefixime into its amorphous form.

Determination of cefixime using a novel electrochemical sensor produced with gold nanowires/graphene oxide/electropolymerized molecular imprinted polymer.

Quantitative analysis of antibiotics is very important because these drugs are widely used to prevent or treat various diseases. Cefixime (CEF, a semi-synthetic antibiotic and the third generation of cephalosporin) is a bactericidal medicine that prevents formation of cell walls in bacteria as well as their growth and proliferation. It, thus, causes the death of bacteria. Antibiotics such as CEF are generally determined by chromatography and spectroscopy techniques. Electrochemical sensors are one of the fast, convenient and low-cost tools for measuring this type of compounds. In this research, an electrochemical sensor was constructed by modifying a glassy carbon electrode (GCE) with expanded graphene oxide and gold nanowires, and then its surface was electropolymerized with a molecular imprinted polymeric layer of polyaniline. The morphological characterization of the obtained film was carried out by scanning and transmission electron microscopy (SEM and TEM). The proposed sensor was analytically characterized on the purpose of comparing it to other modified GCEs. The sensor could work linearly for the concentration range of 20.0-950.0 nM and with a limit of detection of 7.1 nM. It was successfully applied to determine CEF traces in biological samples (i.e. serum and urine) with excellent recovery percentages.

Surface plasmon resonance of gold nanoparticles as a colorimetric sensor for indirect detection of Cefixime.

This study reports a colorimetric sensor with excellent sensitivity to detect Cefixime base on gold nanoparticles. Cefixime is an antibiotic which has a wide range of applications in medicine. Cefixime did not change the surface plasmon resonance bond in gold nanoparticles solution; therefore, there was no change in the color solution of gold nanoparticles. The presence of Alizarin Red S in the system was necessary for the degradation of Cefixime, resulting in the aggregation of gold nanoparticles and a color change from red to blue. As a result of aggregation, the localized surface plasmon resonance band of gold nanoparticles decreased to around 525 nm and a new red-shifted band at 640 nm appeared which increases gradually as the function of Cefixime concentration. A unique detection limit (2.5 ng mL-1) was achieved for Cefixime in comparison with other colorimetric methods. Relative standard deviations (RSD) for 40.0 and 140.0 ng mL-1 of Cefixime were 2.6 and 1.8% for intra-day respectively. A possible mechanism was discussed for the surface plasmon resonance changes of AuNPs in the presence of Cefixime. The proposed method was applied to detect Cefixime in pharmaceutical samples with satisfactory results. This system is low-cost and is highly sensitive with no need for any preconcentration steps or using any expensive or sophisticated instrumentation.

Analytical method development and validation of spectrofluorimetric and spectrophotometric determination of some antimicrobial drugs in their pharmaceuticals.

In this study, three novel, sensitive, simple and validated spectrophotometric and spectrofluorimetric methods have been proposed for estimation of some important antimicrobial drugs. The first two methods have been proposed for estimation of two important third-generation cephalosporin antibiotics namely, cefixime and cefdinir. Both methods were based on condensation of the primary amino group of the studied drugs with acetyl acetone and formaldehyde in acidic medium. The resulting products were measured by spectrophotometric (Method I) and spectrofluorimetric (Method II) tools. Regarding method I, the absorbance was measured at 315nm and 403nm with linearity ranges of 5.0-140.0 and 10.0-100.0µg/mL for cefixime and cefdinir, respectively. Meanwhile in method II, the produced fluorophore was measured at λem 488nm or 491nm after excitation at λex 410nm with linearity ranges of 0.20-10.0 and 0.20-36.0µg/mL for cefixime and cefdinir, respectively. On the other hand, method III was devoted to estimate nifuroxazide spectrofluorimetrically depending on formation of highly fluorescent product upon reduction of the studied drug with Zinc powder in acidic medium. Measurement of the fluorescent product was carried out at λem 335nm following excitation at λex 255nm with linearity range of 0.05 to 1.6µg/mL. The developed methods were subjected to detailed validation procedure, moreover they were used for the estimation of the concerned drugs in their pharmaceuticals. It was found that there is a good agreement between the obtained results and those obtained by the reported methods.

Development and validation of a new and economical stability indicating RP-HPLC method for cefixime trihydrate

ABSTRACT The present work describes the development of a new high performance liquid chromatographic (HPLC) method for the determination of Cefixime trihydrate under different stress conditons as specified by ICH. For the analysis, a Phenomenex (250 x 4.6 mm, 5 µm particle size) ODS column and a SPD 20 A UV detector at 289 nm was used. The selected mobile phase was 10 mM disodium hydrogen phosphate (with 0.5% TEA, pH adjusted to 6.3 with OPA) and methanol in the ratio of 75:25 (v/v) in isocratic mode at a flow rate of 1 mL.min-1.The linear regression analysis data for the calibration plots showed good linear relationship with r2 = 0.9997 in the concentration range of 5-100 μg.mL-1. The stress degradation was performed using acid, alkali, water, hydrogen peroxide and uv light.

RESUMO O presente trabalho descreve o desenvolvimento de um novo alta performance cromatografia líquida (HPLC) método para a determinação de cefixima tri-estresse sob diferentes condições, conforme especificado pelo ICH. Para a análise, a Phenomenex (250 x 4,6 mm, 5 µm de granulometria) ODS coluna e a SPD 20 um detector de UV em 289 nm foi utilizado. A fase móvel selecionado foi de 10 mM hidrogenofosfato dissódico (com 0,5% TEA, o pH ajustado para 6,3 com OPA) e de metanol em razão de 75:25 (v/v) no modo isocrático com uma taxa de fluxo de 1 mL.min-1. A análise de regressão linear para dados da calibração parcelas apresentaram boa relação linear com r2 = 0,9997 no intervalo de concentração de cerca de 5 100 µg.mL-1. Degradação do estresse foi realizado utilizando um ácido, alcalino, a água, o peróxido de hidrogênio e luz uv.

A cross-sectional investigation of the quality of selected medicines in Cambodia in 2010.

BACKGROUND: Access to good-quality medicines in many countries is largely hindered by the rampant circulation of spurious/falsely labeled/falsified/counterfeit (SFFC) and substandard medicines. In 2006, the Ministry of Health of Cambodia, in collaboration with Kanazawa University, Japan, initiated a project to combat SFFC medicines. METHODS: To assess the quality of medicines and prevalence of SFFC medicines among selected products, a cross-sectional survey was carried out in Cambodia. Cefixime, omeprazole, co-trimoxazole, clarithromycin, and sildenafil were selected as candidate medicines. These medicines were purchased from private community drug outlets in the capital, Phnom Penh, and Svay Rieng and Kandal provinces through a stratified random sampling scheme in July 2010. RESULTS: In total, 325 medicine samples were collected from 111 drug outlets. Non-licensed outlets were more commonly encountered in rural than in urban areas (p < 0.01). Of all the samples, 93.5% were registered and 80% were foreign products. Samples without registration numbers were found more frequently among foreign-manufactured products than in domestic ones (p < 0.01). According to pharmacopeial analytical results, 14.5%, 4.6%, and 24.6% of the samples were unacceptable in quantity, content uniformity, and dissolution test, respectively. All the ultimately unacceptable samples in the content uniformity tests were of foreign origin. Following authenticity investigations conducted with the respective manufacturers and medicine regulatory authorities, an unregistered product of cefixime collected from a pharmacy was confirmed as an SFFC medicine. However, the sample was acceptable in quantity, content uniformity, and dissolution test. CONCLUSIONS: The results of this survey indicate that medicine counterfeiting is not limited to essential medicines in Cambodia: newer-generation medicines are also targeted. Concerted efforts by both domestic and foreign manufacturers, wholesalers, retailers, and regulatory authorities should help improve the quality of medicines.

Application of attenuated total reflectance Fourier transform infrared spectroscopy for determination of cefixime in oral pharmaceutical formulations.

A quick and reliable analytical method for the quantitative assessment of cefixime in orally administered pharmaceutical formulations is developed by using diamond cell attenuated total reflectance (ATR) Fourier transform infrared (FT-IR) spectroscopy as an easy procedure for quality control laboratories. The standards for calibration were prepared in aqueous medium ranging from 350 to 6000mg/kg. The calibration model was developed based on partial least square (PLS) using finger print region of FT-IR spectrum in the range from 1485 to 887cm(-1). Excellent coefficient of determination (R(2)) was achieved as high as 0.99976 with root mean square error of 44.8 for calibration. The application of diamond cell (smart accessory) ATR FT-IR proves a reliable determination of cefixime in pharmaceutical formulations to assess the quality of the final product.

Spectrofluorimetric method for determination and validation of cefixime in pharmaceutical preparations through derivatization with 2-cyanoacetamide.

A simple, sensitive and accurate method has been developed for spectrofluorimetric determination of cefixime in pure form and pharmaceutical preparations. The method is based on the reaction of cefixime with 2-cyanoacetamide in the presence of 21% ammonia at 100 °C. The fluorescent reaction product showed maximum fluorescence intensity at λ 378 nm after excitation at λ 330 nm. The factors affecting the derivatization reaction were carefully studied and optimized. The fluorescence intensity versus concentration plot was rectilinear over the range of 0.02 to 4 µg mL(-1) with correlation coefficient of 0.99036. The limit of detection (LOD) and limit of quantification (LOQ) was found to be 2.95 ng mL(-1) and 9.84 ng mL(-1), respectively. The proposed method was validated statistically and through recovery studies. The method was successfully applied for the determination of cefixime in pure and dosage form with percent recoveries from 98.117% to 100.38%. The results obtained from the proposed method have been compared with the official HPLC method and good agreement was found between them.

Voltammetric determination of cefixime in pharmaceuticals and biological fluids.

Electroreduction and adsorption of cefixime was studied in phosphate buffer by cyclic voltammetry (CV), differential pulse cathodic adsorptive stripping voltammetry (DPCAdSV), and square-wave cathodic adsorptive stripping voltammetry (SWCAdSV) at hanging mercury drop electrode (HMDE). These fully validated sensitive and reproducible cathodic adsorptive stripping voltammetric procedures were applied for the trace determination of the bulk drug in pharmaceutical formulations and in human urine. The optimal experimental parameters were as follows: accumulation potential=-0.1 V (vs. Ag/AgCl, 3M KCl), accumulation time=50s, frequency=140 Hz, pulse amplitude=0.07 V, and scan increment=10 mV in phosphate buffer (pH 2.6). The first peak current showed a linear dependence with the drug concentration over the range of 50 ng ml(-1) to 25.6 µg ml(-1). The achieved limit of detection and limit of quantitation were 3.99 and 13.3 ng ml(-1) by SWCAdSV and 7.98 and 26.6 ng ml(-1) by DPCAdSV, respectively. The procedure was applied to assay the drug in tablets. Applicability was also tested in urine samples. Peak current was linear with the drug concentration in the range of 1 to 60 µg ml(-1) of the urine, and minimum detectability was found to be 12.6 ng ml(-1) by SWCAdSV and 58.4 ng ml(-1) by DPCAdSV.

Maternal blood and amniotic fluid levels of moxifloxacin, levofloxacin and cefixime.

AIM: Moxifloxacin and levofloxacin are wide spectrum quinolones and cefixime is a third-generation cephalosporin with a wider spectrum of activity against gram-positive and gram-negative bacteria and anaerobics. Although they are widely used, little is known about the amniotic fluid levels of these antibiotics. The aim of the present investigation was to study and compare the maternal blood and amniotic fluid levels of these antibiotics in second trimester pregnancy. METHODS: To assess the amniotic fluid levels of these antibiotics, 10 pregnant women were given moxifloxacin, 10 were given levofloxacin and 6 were given cefixime orally 2 h before amniocentesis as a single dose for prophylaxis. During amniocentesis, an extra 2 mL amniotic fluid sample and 2 mL maternal venous blood were drawn. The levels of these agents in samples were analyzed using high performance liquid chromatography. RESULTS: The amniotic fluid levels of moxifloxacin and levofloxacin were 0.27 +/- 0.21 microg/mL and 0.60 +/- 0.41 microg/mL, respectively. The maternal blood levels were 3.53 +/- 0.65 microg/mL and 3.95 +/- 0.77 microg/mL in the moxifloxacin and levofloxacin groups, respectively. The maternal blood level of cefixime was 2.59 +/- 1.10 microg/mL and the amniotic fluid level was 0.85 +/- 0.42 microg/mL. The amniotic fluid passage rates were 7.83% for moxifloxacin, 15.67% for levofloxacin and 37.55% for cefixime. CONCLUSION: Of these three antibiotics, cefixime has the highest transplacental passage rate and, therefore, can be used as a therapeutic agent in infectious conditions in which membranes and the placenta are involved. Moxifloxacin and levofloxacin have low passage rates, which should be considered when using as a therapeutic agent.

Simultaneous determination of cefixime trihydrate and dicloxacillin sodium in pharmaceutical dosage form by reversed-phase high-performance liquid chromatography.

A simple, precise, accurate, and sensitive RP-HPLC method for simultaneous determination of cefixime trihydrate and dicloxacillin sodium in combined tablet dosage form was developed and validated. Chromatographic separation of the two drugs was performed on a Purospher BDS C18 column (25 cm x 4.6 mm id, 5 microm particle size). The mobile phase methanol-0.01 M phosphate buffer (75 + 25, v/v), adjusted to pH 3 with glacial acetic acid, was delivered at a flow rate of 1.0 mL/min. Detection was performed at 227 nm. Separation was completed within 10 min. Calibration curves were linear with R2 between 0.99 to 1.0 over a concentration range of 2-10 microg/mL for cefixime trihydrate and 5-25 micromL for dicloxacillin sodium. The RSD for intraday and interday precision was < 2.0%.

A novel sensor for cephalosporins based on electrocatalytic oxidation by poly(o-anisidine)/SDS/Ni modified carbon paste electrode.

In this work for first time, the electrocatalytic oxidations of some cephalosporins were carried out by poly(o-anisidine)/SDS/Ni modified carbon paste electrode using cyclic voltammetry, chronoamperometry and chronocoulometry methods. At first, poly(o-anisidine) was formed by cyclic voltammetry in monomer solution containing sodium dodesyl sulfate (SDS), on carbon paste electrode surface. Then, Ni(II) ions were incorporated to electrode by immersion of the polymeric modified electrode having amine group in 0.1molL(-1) Ni(II) ion solution. A good redox behavior was observed for the Ni(OH)(2)/NiOOH couple on the surface of this electrode. Cephalosporins were successfully oxidized on the surface of this nickel ions dispersed poly(o-anisidine) modified carbon paste electrode. The electrocatalytic oxidation peak currents of cephalosporins were linearly dependent on their concentration. Electrode was successfully applied to determine cephalosporins in pharmaceutical preparations.

Simultaneous multiresponse optimization of an HPLC method to separate seven cephalosporins in plasma and amniotic fluid: application to validation and quantification of cefepime, cefixime and cefoperazone.

An HPLC method for the separation of seven cephalosporins [Cefepime (CEP), ceftazidime (CTA), ceftizaxime (CTI), ceftriaxone (CTR), cefotaxime (COT), cefixime (CIX) and cefoperazone (COP)] in human plasma and amniotic fluid has been developed. Optimization of the chromatographic method was performed in three steps: a series of initial experiments followed by two sets of experiments based on different experimental designs. The initial experiments were performed to decide the basic analytical requirements of the method. Then screening experiment fractional factorial design was used in order to decrease the number of parameters by eliminating parameters which having insignificant effect on responses. The parameters having significant effect were further optimized through a full factorial design. Having studied two responses (retention times and resolutions), a desirability function that assess the responses together, was used to find experimental conditions where the system generated desirable results. The desirable results were obtained with XTerra C18 (250 mm x 4.6mm, 5 microm i.d.) column, 40 mM phosphate buffer, pH 3.2, 18% MeOH, 0.85 mL min(-1) flow rate and 32 degrees C column temperature. Gradient elution with MeOH was applied. A simple and efficient solid-phase extraction was applied for the preparation of plasma and amniotic fluid samples. The validation parameters of the method were evaluated in accordance with ICH guideline. The method validated was applied to the analysis of CEP and COP in maternal venous, fetal venous and fetal arterial plasma, and to the analysis of CIX in maternal venous plasma and amniotic fluid.

Mechanism and implication of cephalosporin penetration into oropharyngeal mucosa.

The aim of this study was to explore the mechanism(s) by which oral cephalosporins penetrate into human oropharyngeal mucosa, and thus, the availability of sufficient concentrations at the site of infection. Two oral cephalosporin prototypes, cephalexin (first generation) and cefixime (third generation), were administered to five healthy subjects at two different visits with a 1-week washout period. Plasma and saliva samples were collected and drug concentrations were measured using an appropriate HPLC method. The maximum plasma concentrations (Cmax) of cefixime and cephalexin were 2.97+/-0.24 microg ml(-1) and 77.65+/-18.91 microg ml(-1), respectively. These concentrations were associated with a maximum salivary concentration (CSmax) of 0.56 microg ml(-1) for cefixime and 3.34 microg ml(-1) for cephalexin. Such levels exceed the reported minimal inhibitory concentration (MIC) for Streptococcus pyogenes and Streptococcus pneumoniae. The average concentration of cefixime in saliva corresponded to its plasma free fraction (saliva/plasma [S/P] ratio; 0.34). However, this observation was not true for cephalexin, for which antibiotic concentrations in the saliva did not appear to correspond to its plasma free fraction (0.8-0.85), with an S/P ratio of only 0.092. Our findings indicate that an active transport mechanism exists for cefixime excretion into human oropharyngeal mucosa, whereas cephalexin is passively diffused, although to a limited extent, as measured by its salivary concentrations.

Simultaneous estimation of Cefixime and Erdosteine in capsule dosage form by spectrophotometric method.

Two accurate, precise, rapid and economical methods viz. Absorption correction method and Dual wavelength method were developed for the estimation of Cefixime (CEF) and Erdosteine (ERDO) in capsule dosage form. In both the methods linearity was observed in the concentration range of 2-25 microg/ml for Cefixime and 3-37.5 microg/ml for Erdosteine. The results of the analysis have been validated statistically and by recovery studies. The percentage assay was found to be 100.03 +/- 0.68 for Cefixime and 99.5 +/- 1.0 for Erdosteine (Mean +/- S.D) by method A and 99.54 +/- 0.84 for Cefixime and 100.54 +/- 1.3 for Erdosteine (Mean +/- S.D) by method B respectively.

Simultaneous determination of potassium clavulanate and cefixime in synthetic mixtures by high-performance liquid chromatography.

A simple, precise, and sensitive high-performance liquid chromatographic method was developed and validated for the simultaneous determination of potassium clavulanate and cefixime in synthetic mixture form. The analytes were separated on a C18 column by using 0.03 M disodium hydrogen phosphate buffer (pH 6.5)-methanol (84 + 16, v/v) as the mobile phase with detection at 220 nm. The method exhibited high sensitivity and good linearity in the concentration ranges of 12.5-62.5 and 20-100 microg/mL for potassium clavulanate and cefixime, respectively. The total run time for the 2 components was <8 min, and the average recovery was >101.5% with a relative standard deviation of <1.0%. The proposed method was validated according to guidelines of the International Conference on Harmonization by evaluation of linearity, recovery, selectivity, robustness, limits of detection and quantitation, and within- and between-day precision. The results obtained for the synthetic mixture show that the method is highly precise and accurate for the simultaneous determination of potassium clavulanate and cefixime.

Spectrophotometric, difference spectroscopic, and high-performance liquid chromatographic methods for the determination of cefixime in pharmaceutical formulations.

Three simple and sensitive spectrophotometric, difference spectroscopic, and liquid chromatographic (LC) methods are described for the determination of cefixime. The first method is based on the oxidative coupling reaction of cefixime with 3-methyl-2-benzothiazolinon hydrazone HCI in presence of ferric chloride. The absorbance of reaction product was measured at the maximum absorbance wavelength (wavelength(max)), 630 nm. The difference spectroscopic method is based on the measurement of absorbance of cefixime at the absorbance maximum, 268 nm, and minimum, 237 nm. The measured value was the amplitude of maxima and minima between 2 equimolar solutions of the analyte in different chemical forms, which exhibited different spectral characteristics. The conditions were optimized, and Beer's law was obeyed for cefixime at 1 to 16 microg/mL and 10 to 50 microg/mL, respectively. The third method, high-performance LC, was developed for the determination of cefixime using 50 mM potassium dihydrogen phosphate (pH 3.0)-methanol (78 + 22, v/v) as the mobile phase and measuring the response at wavelength(max) 286 nm. The analysis was performed on a Lichrospher RPC18 column. The calibration curve was obtained for cefixime at 5 to 250 microg/mL, and the mean recovery was 99.71 +/- 0.01%. The methods were validated according to the guidelines of the U.S. Pharmacopoeia and also assessed by applying the standard addition technique. The results obtained in the analysis of dosage forms agreed well with the contents stated on the labels.