Acinetobacter baumannii detected on modified charcoal-cefoperazone-deoxycholate agar in a waste stabilization pond.

Campylobacter is a recommended reference pathogen for the verification and validation of water recycling schemes in Australia and globally. In a larger study investigating the efficacy of pathogen removal in waste stabilization ponds (WSP), we cultivated bacteria from wastewater samples on modified charcoal-cefoperazone-deoxycholate agar (mCCDA) targeting the growth of Campylobacter. A high number of colonies characteristic of Campylobacter grew on this selective medium, but this did not correlate with qPCR data. Using primers targeting the 16S rRNA gene, and additional confirmatory tests to detect VS1, ompA, blaOXA-51-like, blaOXA-23-like genes, we tested 80 random colonies from 10 WSP samples. All 80 were identified as Acinetobacter baumannii. Wastewater grab samples taken three times over 6 months throughout the WSP system showed removal of A. baumannii in the WSP at rates similar to that of Escherichia coli. Our study suggests that mCCDA agar is not a suitable medium for isolating Campylobacter from environmental samples and that A. baumannii can be used as an indicator for removal of pathogens in WSPs.

Dual-channel Microchip Electrophoresis with Amperometric Detection System for Rapid Analysis of Cefoperazone and Sulbactam.

A dual-channel microchip electrophoresis (ME) with in-channel amperometric detection was developed for cefoperazone and sulbactam determination simultaneously. In this study, a microelectrode detector was made of gold nanoparticles (GNPs) modified indium tin oxide (ITO)-coated poly-ethylene terephthalate (PET) film. The parameters including detection potential applied on working electrode, buffer concentration and pH value were optimized to improve the detection sensitivity and separation efficiency of cefoperazone and sulbactam. Under the optimal conditions, sensitive detection of cefoperazone and sulbactam was obtained with limits of detection (LODs) (S/N = 3) of 0.52 and 0.75 µg/mL, respectively. The plasma sample, which was from a patient with a brain injury taking Sulperazone, was successfully detected with a simple sample pretreatment process by dual-channel ME amperometric detection. This rapid and sensitive method possesses practical potential in clinical applications, and could provide a guidance for clinical rational drug use.

Determination of cefotaxime, cefoperazone, ceftazidime and cefadroxil using surface plasmon resonance band of silver nanoparticles

The aim of this work is to evaluate simple, sensitive, effective and validated procedures for the determination of cefotaxime, cefoperazone, ceftazidime and cefadroxil. In this study, the methods based on the ability of the cited drugs to reduce Ag+ ions to silver nanoparticles (Ag-NPs) in the presence of Polyvinyl Pyrrolidone (PVP) as a stabilizing agent producing very intense surface plasmon resonance peak of Ag-NPs (λmax. = 410-430 nm). The plasmon absorbance of the Ag-NPs allows the quantitative spectrophotometric determination of the cited drugs. The calibration curves are linear with concentration ranges of 0.4-3.2, 1-8, 0.5-4.0 and 1.5-9.0 µg/mL for cefotaxime, cefoperazone, ceftazidime and cefadroxil, respectively. Apparent molar absorptivity, detection and quantitative limits are calculated. Applications of the proposed methods to representative pharmaceutical formulations are successfully presented. The extracellular synthesis of nanoparticles is fast, and the method doesn't require various elaborate treatments and tedious extraction procedures.

Development and Validation of HPLC and HPTLC Methods for Determination of Cefoperazone and Its Related Impurities.

Validated sensitive and highly selective methods were developed for the quantitative determination of cefoperazone sodium (CEF) in the presence of its reported impurities; 7-aminocephalosporanic acid (7-ACA) and 5-mercapto-1-methyl-tetrazole (5-MER). Method A is high-performance liquid chromatography (HPLC), where the mixture of CEF and the reported impurities; 7-ACA and 5-MER were separated on a C8 column (5 µm ps, 250 mm × 4.6 i.d.) using methanol:0.05 M KH2PO4 buffer (22.5:77.5 v/v, pH 7.5) as a mobile phase. The three components were detected at 254 nm with a concentration range of 10-90 µg mL(-1) and the mean percentage recovery 99.67% (SD 1.465). Method B is high-performance thin layer chromatography (HPTLC), where the mixture of CEF and the reported impurities were separated on silica gel HPTLC F254 plates using (acetone:methanol:ethyl acetate:2% sodium lauryl sulfate:glacial acetic acid) (3:2:3:0.8:0.2, by volume) as a developing system and scanning at 254 nm over a concentration range of 1-10 µg per band with the mean percentage recovery 99.95% (SD 1.335). The proposed methods were statistically compared with a reported HPLC method with no significant difference regarding accuracy and precision; indicating the ability of the proposed methods to be reliable and suitable for routine analysis of drug product. The proposed HPTLC method proved to be more sensitive, while the HPLC gave more reproducible results besides saving time.

Preparation of ZnS:Ni/ZnS quantum dots with core/shell structure and application for detecting cefoperazone-sulbactam.

ZnS:Ni quantum dots (QDs) have been synthesized via a water-soluble route, which were coated by ZnS shell through surface modification to give ZnS:Ni/ZnS QDs. The QDs were characterized by atomic force microscope, X-ray diffraction, infrared spectrometry and fluorescent spectrometry. Then, a novel method for the determination of cefoperazone-sulbactam (CPZ-SBT) in aqueous solutions has been developed based on the enhancement of fluorescence of ZnS:Ni/ZnS QDs in the presence of CPZ-SBT. Under the optimal conditions, the enhanced fluorescence intensity (ΔF) was proportional to CPZ-SBT concentration in the range of 8.0×10(-6)-1.0×10(-4) g/L with a detection limit of 1.0×10(-7) g/L. The method was employed for the determination of CPZ-SBT in sample to give satisfactory result. Compared with others, this method was more sensitive, fast and simple with low limit detection.

[Experimental study on concentrations and pharmacokinetics of antibiotics in bile and evaluation of their microbicidal potential].

OBJECTIVE: To study the concentrations and pharmacokinetics of 6 different kinds of antibiotics in rabbit bile, and evaluate their microbicidal potential. METHODS: Thirty-six health rabbits were randomly divided into 6 groups, and each group was 6 rabbits. After anaesthesia, the common bile duct of rabbit was isolated and cumulated with a silicone tube. The rabbits were administered intravenously with the equal-effect dose of antibiotics. Bile (1.5 ml) was collected at different time points after administration, and the concentration of antibiotics of bile was assayed by high performance liquid chromatography. The bile drug concentration-time data were processed by software to figure out the pharmacokinetic parameters such as maximum concentration (C(max)), peak time (T(max)), half-life time (T(1/2)), clearance (CL) and apparent volume of distribution (VD). The bile antibiotics concentration contrasted to the minimum inhibitory concentration (MIC), and attained the bactericidal index (C(max)/MIC) and the time when the drug concentration exceeded the MIC (T(>MIC)). RESULTS: The C(max) and T1/2 of each antibiotic were as the followings: piperacillin (7 950 ± 3 023) mg/L and (1.97 ± 1.23) h, ceftriaxone (1 104 ± 248) mg/L and (3.14 ± 0.57) h, cefoperazone (5 215 ± 2 225) mg/L and (0.89 ± 0.13) h, meropenem (31.97 ± 12.44) mg/L and (0.36 ± 0.11) h, levofloxacin (66.3 ± 36.9) mg/L and (3.32 ± 2.57) h, metronidazole (28.2 ± 10.2) mg/L and (0.81 ± 0.33) h, respectively. Piperacillin/tazobactam and cefoperazone/sulbactam had the largest bactericidal index and the longest T(>MIC), and their bactericidal indexes were (62.1 ± 23.6) - (993.8 ± 377.9) and (164.8 ± 69.0) - (659.3 ± 275.9), their T(>MIC) were (6.00 ± 2.53) - (8.00 ± 0.00) h and (6.33 ± 1.97) - (8.00 ± 0.00) h. The bactericidal index and T(>MIC) of levofloxacin were the smallest, which were (2.1 ± 1.2) - (8.3 ± 4.6) and (0.54 ± 0.25) - (2.67 ± 1.03) h . Ceftriaxone and meropenem were as the medium, and their bactericidal indexes and T(>MIC) were (4.3 ± 1.0) - (69.2 ± 15.5) , (1.42 ± 0.65) - (8.00 ± 0.00) h and (2.0 ± 0.8) - (1 031.3 ± 401.4) , (0.29 ± 0.10) - (1.83 ± 0.26) h. The bactericidal index of metronidazole to anaerobic ranged from 7.4 to 294.9, and the T(>MIC) ranged from 1.88 to 5.00 h. CONCLUSIONS: The bile concentrations of six antibiotics all exceed their effective bactericidal concentrations. The concentration-time curves of piperacillin, cefoperazone, meropenem and metronidazole conformed to one-compartment model, and ceftriaxone and levofloxacin are conformed to two-compartment model. Piperacillin/tazobactam and cefoperazone/sulbactam have the largest bactericidal index and the longest T(>MIC), so they can be chosen as the first choice for the therapy of hepatobiliary infection.For the anaerobic, the microbicidal potential of metronidazole is high.

UV spectrophotometric simultaneous determination of cefoperazone and sulbactam in pharmaceutical formulations by derivative, Fourier and wavelet transforms.

Signal processing methods based on the use of derivative, Fourier and wavelet transforms were proposed for the spectrophotometric simultaneous determination of cefoperazone and sulbactam in powders for injection. These transforms were successfully applied to UV spectra and ratio spectra to find suitable working wavelengths. Wavelet signal processing was proved to have distinct advantages (i.e. higher peak intensity obtained, additional smooth function and scaling factor process eliminated) over derivative and Fourier transforms. Especially, a better resolution of spectral overlapping bands was obtained by the use of double signal transform in the sequences such as (i) spectra pre-processed by Fractional Wavelet Transform and subsequently subjected to Continuous Wavelet Transform or Discrete Wavelet Transform, and (ii) derivative - wavelet transforms combined. Calibration graphs for cefoperazone and sulbactam were recorded for the range 10-35 mg/L. Good accuracy and precision were reported for all proposed methods by analyzing synthetic mixtures of cefoperazone and sulbactam. Furthermore, these methods were statistically comparable to RP-HPLC.

[Determination of target compounds in cefoperazone sodium and tazobactam sodium for injection by capillary electrophoresis].

A capillary zone electrophoresis (CZE) method was developed for the simultaneous determination of cefoperazone sodium and tazobactam sodium in the injectable powder of cefoperazone sodium and tazobactam sodium with hydrochlorothiazide as the internal standard. The operation was carried out on a quartz capillary (75 cm x 75 microm i. d. , 63 cm effective length). The electrophoretic conditions were as follows: 40 mmol/L borax solution as the back ground electrolyte (BGE), 12. 0 kV applied voltage, 220 nm as the detection wavelength; the sample solution was injected by hydraulic pressure for 10 s at the height of 10 cm. The cefoperazone and tazobactam showed good linear relationship in the ranges of 0.25-3.96 g/L and 0.062-0.99 g/L with the correlation coefficients of 0.999 5 and 0.999 6, respectively. The relative standard deviations of relative peak areas were less than 3%. The preparation was stable in 208 min. The recovery results met the methodology requirements. The method is simple, rapid, reproducible, and suitable to control the quality of cefoperazone sodium and tazobactam sodium injectable powder.

Cefoperazone sodium preparation behavior after intramammary administration in healthy and infected cows.

Selection of the antimicrobial agent and maintenance of adequate drug concentrations at the site of infection are the most relevant problems in mastitis antibiotic therapy. Intramammary drug efficacy can be maximized by keeping drug concentrations at the site of infection above the minimum inhibitory concentration (MIC) as long as possible; the most important pharmacokinetic and pharmacodynamic (PK/PD) measure for efficacy evaluation is time during which drug concentrations exceed the MIC (t>MIC). To evaluate this measure, the PK profile of cefoperazone (CFP) after single intramammary administration in healthy and subclinical infected Staphylococcus aureus cows and the MIC of Staph. aureus field strains were assessed. In addition, the degree of drug passage from udder to bloodstream was investigated by measuring systemic drug absorption in healthy and infected animals. Cefoperazone concentrations were quantified by HPLC in quarter milk samples and blood serum samples. Systemic drug absorption was negligible in healthy animals (0.020+/-0.006 microg/mL serum at 4 h), whereas it was higher in infected animals (0.102+/-0.079 microg/mL at 4h and 0.025 microg/mL at 24 h), probably due to the damage of epithelial cell junctions caused by subclinical infections. The MIC90 value for CFP in Staph. aureus field strains (n=24) was 0.64 microg/mL. The PK/PD evaluation, determined by t>MIC, showed a longer persistence of CFP in infected quarters than in healthy ones (mean residence time was 8.37+/-1.51 vs. 11.42+/-5.74 h in September and 2.07+/-0.43 vs. 3.31+/-0.91 h in October), with a t>MIC of 45+/-6 h for infected quarters versus 38+/-5 h for healthy quarters different only in October. This could mean a prolonged time in which microorganisms are exposed to drug activity and thus, a greater efficacy of the drug.

Simultaneous multiresponse optimization of an HPLC method to separate seven cephalosporins in plasma and amniotic fluid: application to validation and quantification of cefepime, cefixime and cefoperazone.

An HPLC method for the separation of seven cephalosporins [Cefepime (CEP), ceftazidime (CTA), ceftizaxime (CTI), ceftriaxone (CTR), cefotaxime (COT), cefixime (CIX) and cefoperazone (COP)] in human plasma and amniotic fluid has been developed. Optimization of the chromatographic method was performed in three steps: a series of initial experiments followed by two sets of experiments based on different experimental designs. The initial experiments were performed to decide the basic analytical requirements of the method. Then screening experiment fractional factorial design was used in order to decrease the number of parameters by eliminating parameters which having insignificant effect on responses. The parameters having significant effect were further optimized through a full factorial design. Having studied two responses (retention times and resolutions), a desirability function that assess the responses together, was used to find experimental conditions where the system generated desirable results. The desirable results were obtained with XTerra C18 (250 mm x 4.6mm, 5 microm i.d.) column, 40 mM phosphate buffer, pH 3.2, 18% MeOH, 0.85 mL min(-1) flow rate and 32 degrees C column temperature. Gradient elution with MeOH was applied. A simple and efficient solid-phase extraction was applied for the preparation of plasma and amniotic fluid samples. The validation parameters of the method were evaluated in accordance with ICH guideline. The method validated was applied to the analysis of CEP and COP in maternal venous, fetal venous and fetal arterial plasma, and to the analysis of CIX in maternal venous plasma and amniotic fluid.

Kinetic spectrophotometric determination of certain cephalosporins using oxidized quercetin reagent.

A simple, precise and accurate kinetic spectrophotometric method for determination of cefoperazone sodium, cefazolin sodium and ceftriaxone sodium in bulk and in pharmaceutical formulations has been developed. The method is based upon a kinetic investigation of the reaction of the drug with oxidized quercetin reagent at room temperature for a fixed time of 30 min. The decrease in absorbance after the addition of the drug was measured at 510 nm. The absorbance concentration plot was rectilinear over the range 80-400 microg mL(-1) for all studied drugs. The concentration of the studied drugs was calculated using the corresponding calibration equation for the fixed time method. The determination of the studied drugs by initial rate, variable time and rate-constant methods was feasible with the calibration equations obtained but the fixed time method has been found to be more applicable. The analytical performance of the method, in terms of accuracy and precision, was statistically validated; the results were satisfactory. The method has been successfully applied to the determination of the studied drugs in commercial pharmaceutical formulations. Statistical comparison of the results with a well established reported method showed excellent agreement and proved that there is no significant difference in the accuracy and precision.

Simultaneous determination of ampicillin, cefoperazone, and sulbactam in pharmaceutical formulations by HPLC with beta-cyclodextrin stationary phase.

An accurate and reproducible method for the simultaneous determination of ampicillin (AMP), sulbactam (SUL), and cefoperazone (CFP) in pharmaceutical formulations by using HPLC with beta-CD stationary phase was developed. It involved the use of the added tetraethylammonium acetate (TEAA) reagent, pH, and methanol as the significant parameters to find the optimum separation condition. A high resolution and selectivity of analytes was obtained by running the mobile phase in methanol-5 mM TEAA buffer = 35:65 (v/v, pH 4.5) at 280 nm. The mean recoveries ranged from 96.6 to 103.3% for AMP in the synthetic mixture, 97.6 to 103.0% for SUL, and 97.0 to 104.0% for CFP. The low LOD (<1.8 microg/mL) and low CV (<0.9%) assured that this method was sensitive and reproducible. The assay of analytes in commercial products exhibited that it was convenient and reproducible for routine analyses of these components in sterilized H(2)O, saline, or 5% dextrose injection solutions.

Quantitative determination of unbound cefoperazone in rat bile using microdialysis and liquid chromatography.

Cefoperazone is a third generation cephalosporin antibiotic with a broad spectrum against gram-positive and gram-negative bacteria. It is clinically effective in the treatment of the biliary tract infections. In the present study, we utilized microdialysis sampling technique with shunt linear probe for continuous monitoring levels of cefoperazone from rat biliary ducts. The effects of berberine (a potential P-glycoprotein enhancer) pretreatment were also evaluated. Analysis of cefoperazone in the dialysates was achieved using a reversed phase RP-18 column (250 mm x 4.6 mm i.d.; particle size 5 microm) maintained at ambient temperature. The mobile phase comprised 100 mM monosodium phosphate (pH 5.5)-methanol (70:30, v/v), and the flow rate of the mobile phase was 1 ml/min. The UV detector wavelength was set at 254 nm. The area under the concentration-time curve and elimination half-life of cefoperazone were about 242.3+/-13.4 min mg/ml and 64.1+/-28.2 min, respectively. No significant effect was showed on the pharmacokinetics of cefoperazone with berberine pretreatment. This study represents a successful application of biliary microdialysis sampling technique, which is feasible for pharmacokinetic and biliary drug excretion studies.

A comparative study of capillary zone electrophoresis and pH-potentiometry for determination of dissociation constants.

Acidity constants of six cephalosporin antibiotics, cefalexin, cefaclor, cefadroxil, cefotaxim, cefoperazon and cefoxitin are determined using capillary zone electrophoresis (CZE) and pH-potentiometric titrations. Since CZE is a separation method, it is not necessary for the samples to be of high purity and known concentration because only mobilities are measured. The effect on determination of dissociation constants of different matrices (serum, 0.9% NaCl, fermentation matrix) was examined. The advantages of CZE can be utilized in those fields where potentiometry has limitations (sample quantity, solubility, purity, simultaneous determinations), although pK(a) values that are close to each other can be determined by potentiometry with more accuracy.

Chemiluminescence flow-injection analysis of beta-lactam antibiotics using the luminol-permanganate reaction.

A new flow injection chemiluminescence (CL) method has been developed for the determination of six beta-lactam antibiotics, including amoxicillin, cefadroxil, cefoperazone sodium, cefazolin sodium, cefradine and ceftriaxone sodium. When the antibiotic was injected into a stream of KMnO4 with alkaline luminol, a strong CL signal was produced. The method allows the measurements of 0.1-50.0 mg/L amoxicillin, 0.1-80.0 mg/L cefadroxil, 1.0-30.0 mg/L cefoperazone sodium, 1.0-30.0 mg/L cefazolin sodium, 3.0-50.0 mg/L cefradine and 3.0-50.0 mg/L ceftriaxone sodium. The detection limits are 0.05 mg/L for amoxycillin, 0.05 mg/L for cefadroxil, 0.4 mg/L for cefoperazonum sodium, 0.4 mg/L for cefazolin sodium, 0.8 mg/L for cefradine and 0.8 mg/L for ceftriaxone sodium. The relative standard deviations in 11 repeated measurements are 0.6%, 0.8%, 1.5%, 1.2%, 0.4% and 0.3% for 3.0 mg/L amoxicillin, 1.0 mg/L cefadroxil, 10.0 mg/L cefoperazone sodium, 10.0 mg/L cefazolin sodium, 10.0 mg/L cefradine and 10.0 mg/L ceftriaxone sodium, respectively. The method was successfully applied to the determination of amoxicillin in pharmaceutical preparations. A possible CL reaction mechanism is also discussed.

Voltammetric studies on the antibiotic drug cefoperazone quantification and pharmacokinetic studies.

A fully validated simple, sensitive and selective square-wave stripping voltammetry procedure was described for the trace quantification of cefoperazone in bulk form, formulations and human serum/plasma. The procedure was based on reduction of the adsorbed drug onto a hanging mercury drop electrode. The procedural conditions were optimized as: frequency=60Hz, scan increment=8mV, pulse amplitude=25mV, preconcentration potential=-0.3V (versus Ag/Ag/KCl(s)), preconcentration duration=60-150s and an acetate buffer of pH 4.2 as a supporting electrolyte. A limit of detection of 4.5x10(-10)M and a limit of quantitation of 1.5x10(-9)M bulk cefoperazone were achieved following preconcentration of the drug onto the hanging mercury drop electrode for 150s. The proposed square-wave adsorptive cathodic stripping voltammetric procedure was successfully applied for trace quantification of cefoperazone in human serum and plasma. The achieved limits of detection and quantitation of the drug in human serum were 6x10(-10)M (0.375ngml(-1)) and 2x10(-9)M (1.250ngml(-1)), respectively. The pharmacokinetic parameters of cefoperazone in plasma of hospitalized volunteers were successfully estimated.

[Construction of universal quantitative models for determination of cefoperazone sodium for injection from different manufacturers using near infrared reflectance spectroscopy].

Universal quantitative models using NIR reflectance spectroscopy in two different kinds of sampling mode were developed for the analysis of cefoperazone sodium for injection from different manufacturers in China. The quantitative models were established using partial least squares(PLS). Nineteen batches of cefoperazone sodium for injection samples from 9 different manufacturers were predicted by the quantitative models. The root mean square errors of cross validation (RMSECV) and the root mean square errors of prediction (RMSEP) of the model in integrating sphere sampling mode were 0. 99 and 0. 98, respectively. The values of RMSECV and RMSEP of the model in fibre sampling mode were 1. 12 and 1. 17, respectively. Based on the ICH guidelines and characteristics of NIR spectra, the quantitative models were then evaluated in terms of specificity, linearity, accuracy, and precision. The authors' study has shown that it is feasible to build a universal quantitative model in fibre sampling mode for quick analysis of pharmaceutical products from different manufacturers. As a result of its good specificity and applicability, the model could be used for quick, non-destructive prescreening of counterfeit and substandard drugs in the mobile vehicle.

Square-wave voltammetric determination of cefoperazone in a bacterial culture, pharmaceutical drug, milk, and urine.

Use of square-wave voltammetry (SWV) for determination of cefoperazone (CFPZ) in some buffers, bacterial culture, urine, and milk is described. CFPZ provides a specific voltammetric signal which is affected by pH and solution components. Determination of CFPZ in Britton-Robinson buffer, pH 4.4, is sensitive with a low detection limit (about 0.5 nmol L(-1)). In a more complex medium (bacterial 2YT medium, pH 7.2) the detection limit was approximately 1.5 micromol L(-1). We provide evidence that SWV is a suitable and quick method for CFPZ determination in a culture of living bacteria without separation of biomass. We have found big differences between methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-sensitive Staphylococcus aureus (MSSA) in cultivation in the presence of CFPZ, depending on time. When CFPZ is cleaved by penicillinase, a new SWV peak b appears at more positive potentials. This peak rises both with increasing concentration of enzyme and with cleavage time while the original CFPZ peak is simultaneously decreasing. We determined the concentration of CFPZ in the drug Pathozone by the standard addition method and achieved good agreement with the declared value of CFPZ in the drug. With a simple pretreatment procedure it is possible to determine CFPZ in milk; for urine no pretreatment was required. Using SWV we could detect CFPZ concentrations as low as 500 nmol L(-1) in bovine milk and human urine.

Calorimetric analysis of cephalosporins using an immobilized TEM-1 beta-lactamase on Ni2+ chelating sepharose fast flow.

Two beta-lactamases, penicillinase type I from Bacillus cereus and TEM-1 beta-lactamase from Haemophilus ducreyi, were immobilized on a Chelating Sepharose Fast Flow column loaded with Ni2+ in an active form. Flow-injection analysis of beta-lactams was performed by using an enzyme column reactor fitted into the enzyme thermistor. With both enzymes it was possible to monitor both penicillins and cephalosporins. Moreover, Michaelis constants of the TEM-1 beta-lactamase were markedly increased upon immobilization for all substrates, especially carbenicillin, cephaloridine, and cefoperazone.

[Simultaneous determination of sulbactam sodium and cefoperazone sodium in sulperazon by high performance liquid chromatography].

A reversed-phase, isocratic high performance liquid chromatographic method with acid mobile phase can separate sulbactam and cafoperazone within 12 minutes. Column packed with Hypersil ODS2(250 mm x 4.6 mm i.d., 5 microns) was manufactured by Dalian Elite Company. Mobile phase is composed of water (adjusted to pH 4.0 with 1% phosphoric acid) and acetonitrile (80:20, V/V). The detection was performed at 210 nm and the injection volume was 2 microL. Cefoperazone and sulbactam have good linearity in the ranges of 100 mg/L to 800 mg/L and 100 mg/L to 1,000 mg/L with the correlation coefficients of 0.9991 and 0.9997 respectively. This method is easily to be operated and can be applied for manufacturing and medicinal study.