Characterization of Cellulomonas sp. HM71 as potential probiotic strain for human health.

Cellulomonas sp. HM71, a human gut microbe possesses metabolic machinery to catabolize antigenic gluten, hence, holds promises as microbial therapy to treat gluten-derived celiac disease. However, its efficacy, safety, and survivability in the gastrointestinal ecosystem await functional elucidation. The current study is designed to characterize Cellulomonas sp. HM71 for its physiological, genomic, and probiotic properties. The morphological and physiological assessment indicates it as a coccus-shaped gram-positive bacterium growing optimally at 30°C in a neutral environment (pH 7.0). Cellulomonas sp. HM71 showed continuous growth even in stressful environments (salinity up to 3% NaCl and 6% KCl), variable temperature (25°C to 35°C) and pH (5-9), antibiotics, and gastric and intestinal conditions. The Cellulomonas sp. HM71 genome harbors diversified genetic machinery to modulate humongous metabolic potential for the host. This was substantiated by the hemolytic and CaCo-2 cell line assay which confirms its cellular adherence and biosafety. Notably, genome analysis did not identify any pathogenic islands. Probiotic characterization indicates its potential to overcome waterborne infections and digestion-related disorders. Cumulatively, Cellulomonas sp. HM71 can be considered a probiotic strain for improving human health because of the highlighted functions.

Domain architecture divergence leads to functional divergence in binding and catalytic domains of bacterial and fungal cellobiohydrolases.

Cellobiohydrolases directly convert crystalline cellulose into cellobiose and are of biotechnological interest to achieve efficient biomass utilization. As a result, much research in the field has focused on identifying cellobiohydrolases that are very fast. Cellobiohydrolase A from the bacterium Cellulomonas fimi (CfCel6B) and cellobiohydrolase II from the fungus Trichoderma reesei (TrCel6A) have similar catalytic domains (CDs) and show similar hydrolytic activity. However, TrCel6A and CfCel6B have different cellulose-binding domains (CBDs) and linkers: TrCel6A has a glycosylated peptide linker, whereas CfCel6B's linker consists of three fibronectin type 3 domains. We previously found that TrCel6A's linker plays an important role in increasing the binding rate constant to crystalline cellulose. However, it was not clear whether CfCel6B's linker has similar function. Here we analyze kinetic parameters of CfCel6B using single-molecule fluorescence imaging to compare CfCel6B and TrCel6A. We find that CBD is important for initial binding of CfCel6B, but the contribution of the linker to the binding rate constant or to the dissociation rate constant is minor. The crystal structure of the CfCel6B CD showed longer loops at the entrance and exit of the substrate-binding tunnel compared with TrCel6A CD, which results in higher processivity. Furthermore, CfCel6B CD showed not only fast surface diffusion but also slow processive movement, which is not observed in TrCel6A CD. Combined with the results of a phylogenetic tree analysis, we propose that bacterial cellobiohydrolases are designed to degrade crystalline cellulose using high-affinity CBD and high-processivity CD.

Convergent evolution of processivity in bacterial and fungal cellulases.

Cellulose is the most abundant biomass on Earth, and many microorganisms depend on it as a source of energy. It consists mainly of crystalline and amorphous regions, and natural degradation of the crystalline part is highly dependent on the degree of processivity of the degrading enzymes (i.e., the extent of continuous hydrolysis without detachment from the substrate cellulose). Here, we report high-speed atomic force microscopic (HS-AFM) observations of the movement of four types of cellulases derived from the cellulolytic bacteria Cellulomonas fimi on various insoluble cellulose substrates. The HS-AFM images clearly demonstrated that two of them (CfCel6B and CfCel48A) slide on crystalline cellulose. The direction of processive movement of CfCel6B is from the nonreducing to the reducing end of the substrate, which is opposite that of processive cellulase Cel7A of the fungus Trichoderma reesei (TrCel7A), whose movement was first observed by this technique, while CfCel48A moves in the same direction as TrCel7A. When CfCel6B and TrCel7A were mixed on the same substrate, "traffic accidents" were observed, in which the two cellulases blocked each other's progress. The processivity of CfCel6B was similar to those of fungal family 7 cellulases but considerably higher than those of fungal family 6 cellulases. The results indicate that bacteria utilize family 6 cellulases as high-processivity enzymes for efficient degradation of crystalline cellulose, whereas family 7 enzymes have the same function in fungi. This is consistent with the idea of convergent evolution of processive cellulases in fungi and bacteria to achieve similar functionality using different protein foldings.

Quantifying cellulose accessibility during enzyme-mediated deconstruction using 2 fluorescence-tagged carbohydrate-binding modules.

Two fluorescence-tagged carbohydrate-binding modules (CBMs), which specifically bind to crystalline (CBM2a-RRedX) and paracrystalline (CBM17-FITC) cellulose, were used to differentiate the supramolecular cellulose structures in bleached softwood Kraft fibers during enzyme-mediated hydrolysis. Differences in CBM adsorption were elucidated using confocal laser scanning microscopy (CLSM), and the structural changes occurring during enzyme-mediated deconstruction were quantified via the relative fluorescence intensities of the respective probes. It was apparent that a high degree of order (i.e., crystalline cellulose) occurred at the cellulose fiber surface, which was interspersed by zones of lower structural organization and increased cellulose accessibility. Quantitative image analysis, supported by 13C NMR, scanning electron microscopy (SEM) imaging, and fiber length distribution analysis, showed that enzymatic degradation predominates at these zones during the initial phase of the reaction, resulting in rapid fiber fragmentation and an increase in cellulose surface crystallinity. By applying this method to elucidate the differences in the enzyme-mediated deconstruction mechanisms, this work further demonstrated that drying decreased the accessibility of enzymes to these disorganized zones, resulting in a delayed onset of degradation and fragmentation. The use of fluorescence-tagged CBMs with specific recognition sites provided a quantitative way to elucidate supramolecular substructures of cellulose and their impact on enzyme accessibility. By designing a quantitative method to analyze the cellulose ultrastructure and accessibility, this study gives insights into the degradation mechanism of cellulosic substrates.

Release of Fragrances from Cotton Functionalized with Carbohydrate-Binding Module Proteins.

Perspiration as a response to daily activity and physical exercise results in unpleasant odors that cause social unrest and embarrassment. To tackle it, functional textiles incorporating fragrances could be an effective clothing deodorizing product. This work presents two strategies for the release of ß-citronellol from functionalized cotton with carbohydrate-binding module (CBM)-based complexes (OBP::GQ20::CBM/ß-citronellol-approach 1 and CBM::GQ20::SP-DS3-liposome/ß-citronellol-approach 2). CBM from Cellulomonas fimi was fused with the odorant-binding protein (OBP::GQ20::CBM) and with an anchor peptide with affinity to the liposome membrane (CBM::GQ20::SP-DS3). In approach 1, OBP fusion protein served as a fragrance container, whereas in approach 2, the fragrance was loaded into liposomes with a higher cargo capacity. The two strategies showed a differentiated ß-citronellol release profile triggered by an acidic sweat solution. OBP::GQ20::CBM complex revealed a fast release (31.9% and 25.8% of the initial amount, after 1.5 and 24 h of exposure with acidic sweat solution, respectively), while the CBM::GQ20::SP-DS3-liposome complex demonstrated a slower and controlled release (5.9% and 10.5% of the initial amount, after 1.5 and 24 h of exposure with acidic sweat solution, respectively). Both strategies revealed high potential for textile functionalization aimed at controlled release of fragrances. The OBP::GQ20::CBM/ß-citronellol complex is ideal for applications requiring fast release of a high amount of fragrance, whereas the CBM::GQ20::SP-DS3-liposome/ß-citronellol complex is more suitable for prolonged and controlled release of a lower amount of ß-citronellol.

Secretome profile of Cellulomonas sp. B6 growing on lignocellulosic substrates.

AIMS: Lignocellulosic biomass deconstruction is a bottleneck for obtaining biofuels and value-added products. Our main goal was to characterize the secretome of a novel isolate, Cellulomonas sp. B6, when grown on residual biomass for the formulation of cost-efficient enzymatic cocktails. METHODS AND RESULTS: We identified 205 potential CAZymes in the genome of Cellulomonas sp. B6, 91 of which were glycoside hydrolases (GH). By secretome analysis of supernatants from cultures in either extruded wheat straw (EWS), grinded sugar cane straw (SCR) or carboxymethylcellulose (CMC), we identified which proteins played a role in lignocellulose deconstruction. Growth on CMC resulted in the secretion of two exoglucanases (GH6 and GH48) and two GH10 xylanases, while growth on SCR or EWS resulted in the identification of a diversity of CAZymes. From the 32 GHs predicted to be secreted, 22 were identified in supernatants from EWS and/or SCR cultures, including endo- and exoglucanases, xylanases, a xyloglucanase, an arabinofuranosidase/ß-xylosidase, a ß-glucosidase and an AA10. Surprisingly, among the xylanases, seven were GH10. CONCLUSIONS: Growth of Cellulomonas sp. B6 on lignocellulosic biomass induced the secretion of a diverse repertoire of CAZymes. SIGNIFICANCE AND IMPACT OF THE STUDY: Cellulomonas sp. B6 could serve as a source of lignocellulose-degrading enzymes applicable to bioprocessing and biotechnological industries.

Cellulomonas macrotermitis sp. nov., a chitinolytic and cellulolytic bacterium isolated from the hindgut of a fungus-growing termite.

To investigate the symbiotic roles of the gut microbiota in the fungus-growing termite Macrotermes barneyi, a novel strain with chitinolytic and cellulolytic activity, designated strain an-chi-1T, was isolated from the hindgut of M. barneyi. Strain an-chi-1T grows optimally at 28-30 °C, pH 8.0 in PYG medium. On the basis of 16S rRNA gene sequence analysis, this isolate belongs to the genus Cellulomonas with high sequence similarity to Cellulomonas iranensis (99.4%), followed by Cellulomonas flavigena (98.4%), Cellulomonas phragmiteti (97.4%), Cellulomonas oligotrophica (97.2%) and Cellulomonas terrae (97.0%). The DNA-DNA relatedness between an-chi-1T and the type strains of C. iranensis and C. flavigena DSM20109T are 35.4% and 23.7%, respectively. The major cellular fatty acids are anteiso-C15:0 and C14:0. The polar lipid profile consists of diphosphatidylglycerol, phosphatidylinositol mannosides, phosphatidylinositol dimannosides and one unidentified phospholipid. The cell-wall sugar is ribose. The peptidoglycan contains glutamic acid, aspartic acid and alanine. The DNA G+C content is 67.3 mol%. Based on its distinctive phenotypic, phylogenetic, and chemotaxonomic characteristics, an-chi-1T represents a novel species of the genus Cellulomonas, for which the name Cellulomonas macrotermitis sp. nov. is proposed. The type strain is an-chi-1T (= JCM 31923T = CICC 24195T).

Identification of an α-(1,4)-Glucan-Synthesizing Amylosucrase from Cellulomonas carboniz T26.

Amylosucrase, catalyzing the synthesis of α-(1,4)-glucan from sucrose, has been widely studied and used in carbohydrate biotransformation because of its versatile activities. In this study, a novel amylosucrase was characterized from Cellulomonas carboniz T26. The recombinant enzyme was overexpressed in Escherchia coli and purified by nickel affinity chromatography. It was determined to be a monomeric protein with a molecular mass of 72 kDa. The optimum pH and temperature for transglucosylation were measured to be pH 7.0 and 40 °C. The transglucosylation activity was significantly higher than the hydrolytic activity. The main product generated from sucrose was structurally determined to be α-(1,4)-glucan. A small amount of glucose was produced by hydrolysis, and sucrose isomers including turanose and trehalulose were generated as minor products. The ratio of hydrolytic, polymerization, and isomerization reactions was calculated to be 5.8:84.0:10.2. The enzyme favored production of long-chain insoluble α-glucan at lower temperature.

Cello-oligomer-binding dynamics and directionality in family 4 carbohydrate-binding modules.

Carbohydrate-binding modules (CBMs) play significant roles in modulating the function of cellulases, and understanding the protein-carbohydrate recognition mechanisms by which CBMs selectively bind substrate is critical to development of enhanced biomass conversion technology. CBMs exhibit a limited range of specificity and appear to bind polysaccharides in a directional fashion dictated by the position of the ring oxygen relative to the protein fold. The two family 4 CBMs of Cellulomonas fimi Cel9B (CfCBM4) are reported to preferentially bind cellulosic substrates. However, experimental evidence suggests that these CBMs may not exhibit a thermodynamic preference for a particular orientation. We use molecular dynamics (MD) and free energy calculations to investigate protein-carbohydrate recognition mechanisms in CfCBM4-1 and CfCBM4-2 and to elucidate preferential ligand-binding orientation. We evaluate four cellopentaose orientations including that of the crystal structure and three others suggested by nuclear magnetic resonance (NMR). These four orientations differ based on position of the ligand reducing end (RE) and pyranose ring orientations relative to the protein core. MD simulations indicate that the plausible orientations reduce to two conformations. Calculated ligand-binding free energy discerns each of the orientations is equally favorable. The calculated free energies are in excellent agreement with isothermal titration calorimetry measurements from the literature. MD simulations further reveal the approximate structural symmetry of the oligosaccharides relative to the amino acids along the binding cleft plays a role in the promiscuity of ligand binding. A survey of ligand-bound structures suggests this phenomenon may be characteristic of the broader class of proteins belonging to the ß-sandwich fold.

Production of L-allose and D-talose from L-psicose and D-tagatose by L-ribose isomerase.

L-ribose isomerase (L-RI) from Cellulomonas parahominis MB426 can convert L-psicose and D-tagatose to L-allose and D-talose, respectively. Partially purified recombinant L-RI from Escherichia coli JM109 was immobilized on DIAION HPA25L resin and then utilized to produce L-allose and D-talose. Conversion reaction was performed with the reaction mixture containing 10% L-psicose or D-tagatose and immobilized L-RI at 40 °C. At equilibrium state, the yield of L-allose and D-talose was 35.0% and 13.0%, respectively. Immobilized enzyme could convert L-psicose to L-allose without remarkable decrease in the enzyme activity over 7 times use and D-tagatose to D-talose over 37 times use. After separation and concentration, the mixture solution of L-allose and D-talose was concentrated up to 70% and crystallized by keeping at 4 °C. L-Allose and d-talose crystals were collected from the syrup by filtration. The final yield was 23.0% L-allose and 7.30% D-talose that were obtained from L-psicose and D-tagatose, respectively.

Novel α-L-arabinofuranosidase from Cellulomonas fimi ATCC 484 and its substrate-specificity analysis with the aid of computer.

In the process of gene mining for novel α-L-arabinofuranosidases (AFs), the gene Celf_3321 from Cellulomonas fimi ATCC 484 encodes an AF, termed as AbfCelf, with potent activity, 19.4 U/mg under the optimum condition, pH 6.0 and 40 °C. AbfCelf can hydrolyze α-1,5-linked oligosaccharides, sugar beet arabinan, linear 1,5-α-arabinan, and wheat flour arabinoxylan, which is partly different from some previously well-characterized GH 51 AFs. The traditional substrate-specificity analysis for AFs is labor-consuming and money costing, because the substrates include over 30 kinds of various 4-nitrophenol (PNP)-glycosides, oligosaccharides, and polysaccharides. Hence, a preliminary structure and mechanism based method was applied for substrate-specificity analysis. The binding energy (ΔG, kcal/mol) obtained by docking suggested the reaction possibility and coincided with the experimental results. AbfA crystal 1QW9 was used to test the rationality of docking method in simulating the interaction between enzyme and substrate, as well the credibility of the substrate-specificity analysis method in silico.

Purification and simultaneous immobilization of Arabidopsis thaliana hydroxynitrile lyase using a family 2 carbohydrate-binding module.

Tedious, time- and labor-intensive protein purification and immobilization procedures still represent a major bottleneck limiting the widespread application of enzymes in synthetic chemistry and industry. We here exemplify a simple strategy for the direct site-specific immobilization of proteins from crude cell extracts by fusion of a family 2 carbohydrate-binding module (CBM) derived from the exoglucanase/xylanase Cex from Cellulomonas fimi to a target enzyme. By employing a tripartite fusion protein consisting of the CBM, a flavin-based fluorescent protein (FbFP), and the Arabidopsis thaliana hydroxynitrile lyase (AtHNL), binding to cellulosic carrier materials can easily be monitored via FbFP fluorescence. Adsorption properties (kinetics and quantities) were studied for commercially available Avicel PH-101 and regenerated amorphous cellulose (RAC) derived from Avicel. The resulting immobilizates showed similar activities as the wild-type enzyme but displayed increased stability in the weakly acidic pH range. Finally, Avicel, RAC and cellulose acetate (CA) preparations were used for the synthesis of (R)-mandelonitrile in micro-aqueous methyl tert-butyl ether (MTBE) demonstrating the applicability and stability of the immobilizates for biotransformations in both aqueous and organic reaction systems.

[Special effects of a complex probiotic containing cellulolytic bacteria Cellulomonas on actively growing rabbits].

It was shown that the association of probiotic bacteria of the genuses Bacillus and Cellulomonas form biolayers on the surface of beet marc particles. The positive effect of a fodder additive that contained the biolayer on the basis of a phytomatrix on the growth and development of young rabbits was shown. Feeding of animals with a mixed fodder that contained 0.1% preparation resulted in stimulation of digestion of all components of the food. Among other components of the mixed fodder, cellulose was digested most effectively. An increase in the biomass of symbiotic bacteria and enzymatic activity in the blindgut chymus was also observed. The positive nitrogen balance demonstrated an increase in the nitrogen content in animals and a decrease of its losses with excretion. The mechanism of response of the rabbit's organism to introduction of the complex probiotic preparation into the digestive tract is discussed.

Characterization and flocculation properties of biopolymeric flocculant (glycosaminoglycan) produced by Cellulomonas sp. Okoh.

AIMS: Bioflocculant production potential of an actinobacteria isolated from a freshwater environment was evaluated and the bioflocculant characterized. METHODS AND RESULTS: 16S rDNA nucleotide sequence and BLAST analysis was used to identify the actinobacteria and fermentation conditions, and nutritional requirements were evaluated for optimal bioflocculant production. Chemical analyses, FTIR, 1H NMR spectrometry and SEM imaging of the purified bioflocculant were carried out. The 16S rDNA nucleotide sequences showed 93% similarities to three Cellulomonas species (strain 794, Cellulomonas flavigena DSM 20109 and Cellulomonas flavigena NCIMB 8073), and the sequences was deposited in GenBank as Cellulomonas sp. Okoh (accession number HQ537132). Bioflocculant was optimally produced at an initial pH 7, incubation temperature 30°C, agitation speed of 160 rpm and an inoculum size of 2% (vol/vol) of cell density 1·5 × 10(8) cfu ml(-1). Glucose (88·09% flocculating activity; yield: 4·04 ± 0·33 g l(-1)), (NH(4))2 NO(3) (82·74% flocculating activity; yield: 4·47 ± 0·55 g l(-1)) and MgCl(2) (90·40% flocculating activity; yield: 4·41 g l(-1)) were the preferred nutritional source. Bioflocculant chemical analyses showed carbohydrate, protein and uronic acids in the proportion of 28·9, 19·3 and 18·7% in CPB and 31·4, 18·7 and 32·1% in PPB, respectively. FTIR and 1H NMR indicated the presence of carboxyl, hydroxyl and amino groups amongst others typical of glycosaminoglycan. SEM imaging revealed horizontal pleats of membranous sheets closely packed. CONCLUSION: Cellulomonas sp. produces bioflocculant predominantly composed of glycosaminoglycan polysaccharides with high flocculation activity. SIGNIFICANCE AND IMPACT OF THE STUDY: High flocculation activity suggests suitability for industrial applications; hence, it may serve to replace the hazardous flocculant used in water treatment.

Examining the role of phosphate in glycosyl transfer reactions of Cellulomonas uda cellobiose phosphorylase using D-glucal as donor substrate.

Cellobiose phosphorylase from Cellulomonas uda (CuCPase) is shown to utilize D-glucal as slow alternative donor substrate for stereospecific glycosyl transfer to inorganic phosphate, giving 2-deoxy-α-D-glucose 1-phosphate as the product. When performed in D(2)O, enzymatic phosphorolysis of D-glucal proceeds with incorporation of deuterium in equatorial position at C-2, implying a stereochemical course of reaction where substrate becomes protonated from below its six-membered ring through stereoselective re side attack at C-2. The proposed catalytic mechanism, which is supported by results of docking studies, involves direct protonation of D-glucal by the enzyme-bound phosphate, which then performs nucleophilic attack on the reactive C-1 of donor substrate. When offered D-glucose next to D-glucal and phosphate, CuCPase produces 2-deoxy-ß-D-glucosyl-(1→4)-D-glucose and 2-deoxy-α-D-glucose 1-phosphate in a ratio governed by mass action of the two acceptor substrates present. Enzymatic synthesis of 2-deoxy-ß-D-glucosyl-(1→4)-D-glucose is effectively promoted by catalytic concentrations of phosphate, suggesting that catalytic reaction proceeds through a quaternary complex of CuCPase, D-glucal, phosphate, and D-glucose. Conversion of D-glucal and phosphate presents a convenient single-step synthesis of 2-deoxy-α-D-glucose 1-phosphate that is difficult to prepare chemically.

Purification and characterization of an endo-D: -arabinase produced by cellulomonas.

An extracellular endo-D: -arabinase enzyme produced by the bacterial strain of Cellulomonas was purified 77.1-fold with 0.20% recovery for protein by DEAE Sepharose anion exchange, Sephacryl S-300 gel filtration and blue Sepharose affinity chromatography, and designated as CEDAase. The apparent molecular mass of CEDAase was 45 kDa determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. CEDAase is an endoenzyme for arabinogalactan with the main and specific product of hexa-arabinofuranoside. It reacts optimally with its substrate, arabinogalactan, at approximately pH 8.0 and at 40 °C. CEDAase shows stability in the pH range of 6.0-9.0 and at the temperature below 50 °C. The K(m) measured for the CEDAase was 55.6 µM, with an apparent V(max) of 0.083 µmol/min. To our knowledge, for the first time, the current work obtains an extracellular Cellulomonas endo-D: -arabinase enzyme that might be potentially served as a tool enzyme for hydrolyzing specific cell wall such as Mycobacterium cell. It is purified as an important potential initial material basis for mass spectrometric sequencing and chemical gene synthesis. It may make it possible to clone and express this valuable endo-D: -arabinase and make it available to the mycobacteria scientific community.

Molecular characterization of endo-1,3-ß-glucanase from Cellulosimicrobium cellulans: effects of carbohydrate-binding module on enzymatic function and stability.

An endo-1,3-ß-glucanase was purified from Tunicase®, a crude enzyme preparation from Cellulosimicrobium cellulans DK-1, and determined to be a 383-residue protein (Ala1-Leu383), comprising a catalytic domain of the glycoside hydrolase family 16 and a C-terminal carbohydrate-binding module family 13. The Escherichia coli expression system of the catalytic domain (Ala1-Thr256) was constructed, and the protein with N-terminal polyhistidine tag was purified using a Ni-nitrilotriacetic acid column. We analyzed enzymatic properties of the recombinant catalytic domain, its variants, and the Tunicase®-derived full-length endo-1,3-ß-glucanase. Substitution of Glu119 with Ala and deletion of Met123, both of the residues are located in the catalytic motif, resulted in the loss of hydrolytic activity. In comparison between the full-length enzyme and isolated catalytic domain, their hydrolytic activities for soluble substrates such as laminarin and laminarioligosaccharides were similar. In contrast, the hydrolytic activity of the full-length enzyme for insoluble substrates such as curdlan and yeast-glucan was significantly higher than that of the catalytic domain. It should be noted that the acid stabilities for the hydrolysis of laminarin were clearly different. Secondary structure analysis using circular dichroism showed that the full-length enzyme was more acid stable than was the catalytic domain, possibly because of domain interactions between the catalytic domain and the carbohydrate-binding module.

Cellulomonas aerilata sp. nov., isolated from an air sample.

A Gram-positive, aerobic, motile, coccoid or short rod-shaped bacterium, 5420S-23(T), was isolated from an air sample collected in the Republic of Korea. According to phylogenetic analysis based on 16S rRNA gene sequences, strain 5420S-23(T) revealed 97.5, 97.3, 97.3 and 97.2 % similarity, respectively, to Cellulomonas biazotea DSM 20112(T), Cellulomonas cellasea DSM 20118(T), Cellulomonas fimi DSM 20113(T) and Cellulomonas chitinilytica X.bu-b(T). The peptidoglycan type of strain 5420S-23(T) was A4beta, containing l-ornithine-d-glutamic acid. The cell-wall sugars were galactose, glucose and xylose. The major fatty acids were anteiso-C(15 : 0) (49.7 %) and C(16 : 0) (20.0 %). The major menaquinone was MK-9(H(4)) and major polar lipids were diphosphatidylglycerol and phosphatidylglycerol. The DNA G+C content was 74 mol%. The results of DNA-DNA hybridization with strains of closely related Cellulomonas species, in combination with chemotaxonomic and physiological data, demonstrated that isolate 5420S-23(T) represents a novel Cellulomonas species, for which the name Cellulomonas aerilata sp. nov. is proposed, with strain 5420S-23(T) (=KACC 20692(T) =DSM 18649(T)) as the type strain.

A bifunctional endoglucanase/endoxylanase from Cellulomonas flavigena with potential use in industrial processes at different pH.

Cellulomonas flavigena CDBB-531 was found to secrete a bifunctional cellulase/xylanase with a molecular mass of 49 kDa and pI 4.3. This enzyme was active on Remazol brilliant blue-carboxymethylcellulose (RBB-CMC) and Remazol brilliant blue-xylan (RBB-X). Based on thin-layer chromatographic analysis of the degradation products, the cellulase activity produced glucose, cellobiose, cellotriose, and cellotetraose from CMC as the substrate. When xylan from birchwood was used, end products were xylose, arabinose, and xylobiose. The bifunctional enzyme showed a pH optimum of 6 for cellulase activity and 9 for xylanase activity, which pointed out that this enzyme had separate sites for each activity. In both cases, the apparent optimum temperature was 50 degrees C. The predicted amino acid sequence of purified protein showed similarity with the catalytic domain of several glycosyl hydrolases of family 10.

Cellulomonas composti sp. nov., a cellulolytic bacterium isolated from cattle farm compost.

A bacterial strain, TR7-06(T), which has cellulase and beta-glucosidase activities, was isolated from compost at a cattle farm near Daejeon, Republic of Korea. It was a Gram-positive, aerobic or facultatively anaerobic, non-motile, rod-shaped bacterium. Phylogenetic analysis based on 16S rRNA gene sequences showed that this strain belongs to the genus Cellulomonas, with highest sequence similarity to Cellulomonas uda DSM 20107(T) (98.5 %). Cell wall analysis revealed the presence of type A4beta, L-orn-D-Glu peptidoglycan. The cell-wall sugars detected were mannose and glucose. The predominant menaquinone was MK-9(H(4)); MK-8(H(4)) was detected in smaller quantities. The major fatty acids were anteiso-C(15 : 0), C(16 : 0), C(14 : 0) and C(18 : 0). The polar lipids detected were diphosphatidylglycerol, phosphatidylethanolamine and phosphatidylinositol. The results of DNA-DNA hybridization and physiological and biochemical tests clearly demonstrated that TR7-06(T) represents a novel species. The combined genotypic and phenotypic data show that strain TR7-06(T) (=KCTC 19030(T)=NBRC 100758(T)) merits description as the type strain of a novel Cellulomonas species, Cellulomonas composti sp. nov.