Fluorescent-based micellar incorporated hydrogel materials for selective determination of long-chain aldehydes.

A highly sensitive micelle-induced sensory has been developed for detection of long-chain aldehydes as potential biomarkers of respiratory cancers. The micelle-like sensor was fabricated through the partial self-assembly of CTAB and S2 surfactants, containing a fluorescent hydrazine-functionalized dye (Naph-NH2). In principle, long-chain aldehydes with amphiphilic character act as the induced-fit surfactants to form well-entrapped micellar particles, as well as react with Naph-NH2 to form hydrazone derivatives resulting in fluorescent enhancement. The limit of detection (LOD) of micellar Naph-NH2/CTAB/S2 platform was calculated to be ∼  64.09-80.98 µM for detection of long-chain aldehydes, which showed fluorescent imaging in lung cancer cells (A549). This micellar sensory probe demonstrated practical applicability for long-chain aldehyde sensing in human blood samples with an accepted percent recovery of ~ 94.02-102.4%. Beyond Naph-NH2/CTAB/S2 sensor, the milcellar hybrid sensor was successfully developed by incorporating a micelle-like platform with supramolecular gel regarding to carboxylate-based gelators (Gel1), which showed a tenfold improvement in sensitivity. Expectedly, the determination of long-chain aldehydes through these sensing platforms holds significant promise for point-of-care cancer diagnosis and therapy.

Synergistic activity of gold nanoparticles with amphotericin B on persister cells of Candida tropicalis biofilms.

AIM: The antifungal activity was studied on sessile and persister cells (PCs) of Candida tropicalis biofilms of gold nanoparticles (AuNPs) stabilized with cetyltrimethylammonium bromide (CTAB-AuNPs) and those conjugated with cysteine, in combination with Amphotericin B (AmB). MATERIALS/METHODS: The PC model was used and synergistic activity was tested by the checkerboard assay. Biofilms were studied by crystal violet and scanning electron microscopy. RESULTS/CONCLUSIONS: After the combination of both AuNPs and AmB the biofilm biomass was reduced, with significant differences in architecture being observed with a reduced biofilm matrix. In addition, the CTAB-AuNPs-AmB combination significantly reduced PCs. Understanding how these AuNPs aid in the fight against biofilms and the development of new approaches to eradicate PCs has relevance for chronic infection treatment.

Design a Friendly Nanoscale Chemical Sensor Based on Gold Nanoclusters for Detecting Thiocyanate Ions in Food Industry Applications.

The surfactant cetyltrimethylammonium bromide (CTAB) induces the aggregation of gold nanoclusters (GNCs), leading to the development of a proposed fluorometric technique for detecting thiocyanate (SCN-) ions based on an anti-aggregation mechanism. This approach is straightforward to execute, highly sensitive, and selective. A significant quenching effect occurs in fluorescence upon using the aggregation agent CTAB in GNCs synthesis, resulting in a transition from intense red fluorescence to dim red. The decrease in fluorescence intensity of GNCs in the presence of CTAB is caused by the mechanism of fluorescence quenching mediated by aggregation. As the levels of SCN- rise, the fluorescence of CTAB-GNCs increases; this may be detected using spectrofluorometry or by visually inspecting under UV irradiation. The recovery of red fluorescence of CTAB-GNCs in the presence of SCN- enables the precise and discerning identification of SCN- within the concentration range of 2.86-140 nM. The minimum detectable concentration of the SCN- ions was 1 nM. The selectivity of CTAB-GNCs towards SCN- ions was investigated compared to other ions, and it was demonstrated that CTAB-GNCs exhibit exceptional selectivity. Furthermore, we believe that CTAB-GNCs have novel possibilities as favorable sensor candidates for various industrial applications. Our detection technique was validated by analyzing SCN- ions in milk samples, which yielded promising results.

Nanomaterials for sustainable remediation: efficient removal of Rhodamine B and lead using greenly synthesized novel mesoporous ZnO@CTAB nanocomposite.

This study explores the dual applications of a greenly synthesized ZnO@CTAB nanocomposite for the efficient remediation of Rhodamine B (RhB) and lead (Pb). The synthesis method involves a sustainable approach, emphasizing environmentally friendly practices. FT-IR, XRD, FESEM, zeta potential, and particle size analyzer (PSA), BET, and UV-VIS were used to physically characterize the zinc oxide and CTAB nanocomposite (ZnO@CTAB). The size and crystalline index of ZnO@CTAB are 77.941 nm and 63.56% respectively. The Zeta potential of ZnO@CTAB is about - 22.4 mV. The pore diameter of the ZnO@CTAB was 3.216 nm, and its total surface area was 97.42 m2/g. The mechanism of adsorption was investigated through pHZPC measurements. The nanocomposite's adsorption performance was systematically investigated through batch adsorption experiments. At pH 2, adsorbent dose of 0.025 g, and temperature 50 °C, ZnO@CTAB removed the most RhB, while at pH 6, adsorbent dose of 0.11 g, and temperature 60 °C, ZnO@CTAB removed the most Pb. With an adsorption efficiency of 214.59 mg/g and 128.86 mg/g for RhB and Pb, the Langmuir isotherm model outperforms the Freundlich isotherm model in terms of adsorption. The pseudo-2nd-order model with an R2 of 0.99 for both RhB and Pb offers a more convincing explanation of adsorption than the pseudo-1st-order model. The results demonstrated rapid adsorption kinetics and high adsorption capacities for RhB and Pb. Furthermore, there was minimal deterioration and a high reusability of ZnO@CTAB till 4 cycles were observed.

Efficient Poly-Adenine-Tailed DNA Functionalization of Gold Nanorods for Tailored Nanostructure Assembly.

Gold nanorods (AuNRs) with unique optical properties play a pivotal role in applications in plasmonic imaging, small molecule detection, and photothermal therapy. However, challenges in DNA functionalization of AuNRs hinder their full potential due to the presence of a dense cetyltrimethylammonium bromide (CTAB) bilayer, impeding close DNA contact. In this study, we introduced a convenient approach for the rapid assembly of polyadenine (polyA) tailed DNA on AuNRs with control of DNA density, rigidity, and valence. We explored the impact of DNA with designed properties on the construction of core-satellite structures by employing AuNRs as cores and spherical gold nanoparticles (AuNSs) as satellites. Density, rigidity, and valence are identified as crucial factors for efficient construction. Specifically, polyA-tailed DNA modulated DNA density and reduced spatial hindrance and electrostatic repulsion, thereby facilitating the construction. Enhancing the rigidity of DNA and incorporating multiple binding sites can further improve the efficiency.

Improved SARS-CoV-2 RNA recovery in wastewater matrices using a CTAB-based extraction method.

Wastewater-based epidemiology has allowed tracking the magnitude and distribution of SARS-CoV-2 in communities, allowing public health officials to prepare for impending outbreaks. While many factors influence recovery of SARS-CoV-2 from wastewater, proper extraction, concentration, and purification of RNA are key steps to ensure accurate detection of viral particles. The aim of this study was to compare the efficiency of four commonly used RNA extraction methods for detection of the SARS-CoV-2 RNA genome in sewage samples artificially inoculated with the virus, in order to identify a protocol that improves viral recovery. These methods included CTAB-based, TRIzol-based, and guanidinium thiocyanate (GTC)-based extraction procedures coupled with silica spin column-based purification, and an automated extraction/purification protocol using paramagnetic particles. Following RNA extraction, virus recovery rates were compared using RT-qPCR-based detection. The CTAB-based approach yielded the highest recovery rates and was the only method to consistently demonstrate stable virus recovery percentages regardless of the specific physicochemical characteristics of the samples tested. The TRIzol method proved to be the second most effective, yielding significantly higher recovery rates compared to both the GTC-based and the automated extraction methods. These results suggest that the CTAB-based approach could be a useful tool for the recovery of viral RNA from complex wastewater matrices.

The structure of biodegradable surfactants shaped the microbial community, antimicrobial resistance, and potential for horizontal gene transfer.

While most household surfactants are biodegradable in aerobic conditions, their biodegradability may obscure their environmental risks. The presence of surfactants in a biological treatment process can lead to the proliferation of antimicrobial-resistance genes (ARG) in the biomass. Surfactants can be cationic, anionic, or zwitterionic, and these different classes may have different effects on the proliferation ARG. Cationic hexadecyltrimethyl-ammonium (CTAB), anionic sodium dodecyl sulfate (SDS), and zwitterionic 3-(decyldimethylammonio)-propanesulfonate inner salt (DAPS) were used to represent the three classes of surfactants in domestic household clean-up products. This study focused on the removal of these surfactants by the O2-based Membrane Biofilm Reactor (O2-MBfR) for hotspot scenarios (∼1 mM) and how the three classes of surfactants affected the microbial community's structure and ARG. Given sufficient O2 delivery, the MBfR provided at least 98% surfactant removal. The presence and biodegradation for each surfactant uniquely shaped the biofilms' microbial communities and the presence of ARG. CTAB had by far the strongest impact and the higher ARG abundance. In particular, Pseudomonas and Stenotrophomonas, the two main genera in the biofilm treating CTAB, were highly correlated to the abundance of ARG for efflux pumps and antibiotic inactivation. CTAB also led to more functional genes relevant to the Type-IV secretion system and protection against oxidative stress, which also could encourage horizontal gene transfer. Our findings highlight that the biodegradation of quaternary ammonium surfactants, while beneficial, can pose public health concerns from its ability to promote the proliferation of ARG.

Studying the Mechanics of Membrane Permeabilization through Mechanoelectricity.

In this research, real-time monitoring of lipid membrane disruption is made possible by exploiting the dynamic properties of model lipid bilayers formed at oil-water interfaces. This involves tracking an electrical signal generated through rhythmic membrane perturbation translated into the adsorption and penetration of charged species within the membrane. Importantly, this allows for the detection of membrane surface interactions that occur prior to pore formation that may be otherwise undetected. The requisite dynamic membranes for this approach are made possible through the droplet interface bilayer (DIB) technique. Membranes are formed at the interface of lipid monolayer-coated aqueous droplets submerged in oil. We present how cyclically alternating the membrane area leads to the generation of mechanoelectric current. This current is negligible without a transmembrane voltage until a composition mismatch between the membrane monolayers is produced, such as a one-sided accumulation of disruptive agents. The generated mechanoelectric current is then eliminated when an applied electric field compensates for this asymmetry, enabling measurement of the transmembrane potential offset. Tracking the compensating voltage with respect to time then reveals the gradual accumulation of disruptive agents prior to membrane permeabilization. The innovation of this work is emphasized in its ability to continuously track membrane surface activity, highlighting the initial interaction steps of membrane disruption. In this paper, we begin by validating our proposed approach against measurements taken for fixed composition membranes using standard electrophysiological techniques. Next, we investigate surfactant adsorption, including hexadecyltrimethylammonium bromide (CTAB, cationic) and sodium decyl sulfate (SDS, anionic), demonstrating the ability to track adsorption prior to disruption. Finally, we investigate the penetration of lipid membranes by melittin, confirming that the peptide insertion and disruption mechanics are, in part, modulated by membrane composition.

Organic and Inorganic Template-Assisted Synthesis of Silica Nanotubes and Evaluation of Their Properties.

Mesoporous silica network nanotubes were fabricated using both organic and inorganic templates such as citric acid (CA), cetyltrimethylammonium bromide (CTAB), and sodium bicarbonate (SBC). The phase analysis of synthesized silica network was confirmed by X-ray diffractometer (XRD) analysis, and the present functional groups were revealed by Fourier Transform Infrared Spectroscopy (FTIR) and the formation of tubular morphology was analyzed by transmission electron microscopy (TEM). The mesoporous nature of each template sample was studied using Brunauer-Emmett-Teller (BET) instrument. The surface area and porous size were calculated successfully for fabricated silica network nanotubes.

Precise control over the silica shell thickness and finding the optimal thickness for the peak heat diffusion property of AuNR@SiO2.

Silica-coated gold nanorods (AuNRs) exhibit significantly enhanced photothermal effects and photoacoustic (PA) signal intensities, which is beneficial for various nanophotonic applications in materials science. However, the silica shell thickness for optimum enhancement is not fully understood and is even controversial depending on the physical state of the silica shell. This is because of the lack of systematic investigations of the nanoscale silica shell thickness and the photothermal effect. This study provides a robust synthetic method to control the silica shell thickness at the nanoscale and the physical state-dependent heat diffusion property. The selected base and solvent system enabled the production of silica-coated AuNRs (AuNR@SiO2) with silica shell thicknesses of 5, 10, 15, 20, 25, 30, 35, and 40 nm. AuNRs with a 20 nm silica shell showed the highest photothermal effect with a 1.45-times higher photothermal efficiency than that of AuNRs without a silica shell. The low density of the silica shell on the AuNRs showed a low photothermal effect and photostability. It was found that the disruption of cetyltrimethyl ammonium bromide (CTAB) layers on the AuNRs was responsible for the low photostability of the AuNRs. The simulation study for the heat diffusion property showed facilitated heat diffusion in the presence of a 20 nm silica shell. In a cell-based study, AuNRs with a 20 nm silica shell showed the most sensitive photothermal effect for cell death. The results of this robust study can provide conclusive conditions for the optimal silica shell thickness to obtain the highest photothermal effect, which will be useful for the future design of nanomaterials in various fields of application.

Functionalization of mesoporous silica as an effective composite carrier for essential oils with improved sustained release behavior and long-term antibacterial performance.

In this work, a novel composite carrier system for loading essential oils was developed by using tetraethyl orthosilicate (TEOS) and (3-aminopropyl) triethoxysilane (APTES) as silica precursors and cetyl trimethyl ammonium bromide (CTAB) as a template, and the resultant aminated mesoporous silica was further chemically modified by polyacrylic acid (PAA). The obtained composite carriers exhibited a high loading capability toward tea tree oil (TTO), and they also significantly improved the release behavior of TTO due to the steric hindrance of silica mesopore and the polymer restriction. Besides, it was found that the release behavior followed the First-Order kinetic model, revealing that the release of TTO was driven by the concentration gradient. In addition, these composite carriers with essential oil-loaded demonstrated remarkable antibacterial performance againstE. coliandS. aureus, and they could retain antibacterial performance even after 50 d. Moreover, the antibacterial mechanism was also elucidated with the assistance of nucleic acid and conductivity measurements. Therefore, this work provides a facile and environmentally friendly approach to preparing effective composite carriers for improving the sustained release of essential oils, and the long-term antibacterial performance of these essential oil-loaded composite carriers makes them tremendously potential for practical applications.

The study of laccase immobilization optimization and stability improvement on CTAB-KOH modified biochar.

BACKGROUND: Although laccase has a good catalytic oxidation ability, free laccase shows a poor stability. Enzyme immobilization is a common method to improve enzyme stability and endow the enzyme with reusability. Adsorption is the simplest and common method. Modified biochar has attracted great attention due to its excellent performance. RESULTS: In this paper, cetyltrimethylammonium bromide (CTAB)-KOH modified biochar (CKMB) was used to immobilize laccase by adsorption method (laccase@CKMB). Based on the results of the single-factor experiments, the optimal loading conditions of laccase@CKMB were studied with the assistance of Design-Expert 12 and response surface methods. The predicted optimal experimental conditions were laccase dosage 1.78 mg/mL, pH 3.1 and 312 K. Under these conditions, the activity recovery of laccase@CKMB was the highest, reaching 61.78%. Then, the CKMB and laccase@CKMB were characterized by TGA, FT-IR, XRD, BET and SEM, and the results showed that laccase could be well immobilized on CKMB, the maximum enzyme loading could reach 57.5 mg/g. Compared to free laccase, the storage and pH stability of laccase@CKMB was improved greatly. The laccase@CKMB retained about 40% of relative activity (4 °C, 30 days) and more than 50% of relative activity at pH 2.0-6.0. In addition, the laccase@CKMB indicated the reusability up to 6 reaction cycles while retaining 45.1% of relative activity. Moreover, the thermal deactivation kinetic studies of laccase@CKMB showed a lower k value (0.00275 min- 1) and higher t1/2 values (252.0 min) than the k value (0.00573 min- 1) and t1/2 values (121.0 min) of free laccase. CONCLUSIONS: We explored scientific and reasonable immobilization conditions of laccase@CKMB, and the laccase@CKMB possessed relatively better stabilities, which gave the immobilization of laccase on this cheap and easily available carrier material the possibility of industrial applications.

pH-Responsive Rheological Properties and Microstructure Transition in Mixture of Anionic Gemini/Cationic Monomeric Surfactants.

Surfactant aggregates have long been considered as a tool to improve drug delivery and have been widely used in medical products. The pH-responsive aggregation behavior in anionic gemini surfactant 1,3-bis(N-dodecyl-N-propanesulfonate sodium)-propane (C12C3C12(SO3)2) and its mixture with a cationic monomeric surfactant cetyltrimethylammonium bromide (CTAB) have been investigated. The spherical-to-wormlike micelle transition was successfully realized in C12C3C12(SO3)2 through decreasing the pH, while the rheological properties were perfectly enhanced for the formation of wormlike micelles. Especially at 140 mM and pH 6.7, the mixture showed high viscoelasticity, and the maximum of the zero-shear viscosity reached 1530 Pa·s. Acting as a sulfobetaine zwitterionic gemini surfactant, the electrostatic attraction, the hydrogen bond and the short spacer of C12C3C12(SO3)2 molecules were all responsible for the significant micellar growth. Upon adding CTAB, the similar transition could also be realized at a low pH, and the further transformation to branched micelles occurred by adjusting the total concentration. Although the mixtures did not approach the viscosity maximum appearing in the C12C3C12(SO3)2 solution, CTAB addition is more favorable for viscosity enhancement in the wormlike-micelle region. The weakened charges of the headgroups in a catanionic mixed system minimizes the micellar spontaneous curvature and enhances the intermolecular hydrogen-bonding interaction between C12C3C12(SO3)2, facilitating the formation of a viscous solution, which would greatly induce entanglement and even the fusion of wormlike micelles, thus resulting in branched microstructures and a decline of viscosity.

MWNTs or PEG as Stability Enhancers for DNA-Cationic Surfactant Gel Particles.

Cationic surfactants interact with DNA (Deoxyribonucleic acid), forming surfactant-DNA complexes that offer particularly efficient control for encapsulation and release of DNA from DNA gel particles. In the present work, DNA-based particles were prepared using CTAB (Cetyltrimethylammonium bromide) as the cationic surfactant and modified using two different additives: (Multi-Walled Carbon Nanotubes) MWNT or PEG (Poly Ethylene Glycol). The use of both additives to form composites increased the stability of the gel particles. The stability was monitored by the release of DNA and CTAB in different pH solutions. However, not much is known about the influence of pH on DNA-surfactant interaction and the release of DNA and surfactant from gel particles. It was observed that the solubilization of DNA occurs only in very acid media, while that of CTAB does not depend on pH and gets to a plateau after about 8 h. Within 2 h in contact with a pH = 2 solution, about 1% DNA and CTAB was released. Complete destruction for the gel particles was observed in pH = 2 solution after 17 days for PEG and 20 days for MWNT. The composite particles show a considerably enlarged sustained release span compared to the unmodified ones. The dehydration-rehydration studies show that the structure of the composite gel particles, as determined from SAXS (Small-Angle-X-Ray-Scattering) experiments, is similar to that of the unmodified ones. These studies will allow a better knowledge of these particles' formation and evolution in view of possible applications in drug delivery and release.

Synthesis of Vertically Aligned Porous Silica Thin Films Functionalized by Silver Ions.

In this work, we have developed a chemical procedure enabling the preparation of highly ordered and vertically aligned mesoporous silica films containing selected contents of silver ions bonded inside the mesopore channels via anchoring propyl-carboxyl units. The procedure involves the electrochemically assisted self-assembly co-condensation of tetraethoxysilane and (3-cyanopropyl)triethoxysilane in the presence of cetyltrimethylammonium bromide as a surfactant, the subsequent hydrolysis of cyano groups into carboxylate ones, followed by their complexation with silver ions. The output materials have been electrochemically characterized with regard to the synthesis effectiveness in order to confirm and quantify the presence of the silver ions in the material. The mesostructure has been observed by transmission electron microscopy. We have pointed out that it is possible to finely tune the functionalization level by controlling the co-condensation procedure, notably the concentration of (3-cyanopropyl)triethoxysilane in the synthesis medium.

DNA Isolation from Mycobacteria.

A vast array of molecular biology tools have been developed to investigate the Mycobacterium tuberculosis genome since the advent of its successful sequencing in 1998. These tools, such as quantitative and end point polymerase chain reaction, chromatin immunoprecipitation, and whole genome sequencing, require genomic DNA extracted from lysed mycobacteria. There are numerous methods described in the literature using mechanical, enzymatic, or chemical means to lyse cells and extract genomic DNA to varying degrees of purity. Here, we describe appropriate methods for genomic DNA isolation from solid or liquid cultures from both M. tuberculosis and nontuberculous mycobacteria.

Development of functional lignin-based spherical particles for the removal of vanadium(V) from an aqueous system.

A new type of functional lignin-based spherical particles (L-CTAB) prepared with the use of hexadecyltrimethylammonium bromide (CTAB) was applied as an effective biosorbent for removing vanadium(V) ions. The porous structure, characteristic functional groups, electrokinetic stability, morphology and size of the L-CTAB particles were examined. The conditions of removal were also investigated, including pH (2-12), sorbent mass (0.1-0.5 g), concentration (10-100 mg/dm3), phase contact time (1-240 min) and temperature (293-333 K). At pH 5.0 the maximum sorption percentage (%S) of V(V) was 45%, while at pH 2.0 it was 32%. The maximum sorption capacity of V(V) for L-CTAB was found to be 10.79 mg/g. The kinetic data indicate that the sorption followed the pseudo-second-order and film diffusion models. Sorption equilibrium for V(V) ions removal by L-CTAB was reached after 60 min at the initial concentrations 10 and 50 mg/dm3. It has been shown that the adsorption of V(V) ions on the surface of L-CTAB is a heterogeneous, endothermic and spontaneous reaction, as evidenced by the calculated values of thermodynamic parameters - free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) - for the tested systems at different temperatures. HCl solutions, used as an L-CTAB regeneration agent, quantitatively eluted V(V) ions.

Efficient method for isolation of high-quality RNA from Psidium guajava L. tissues.

Acquiring high-quality RNA in sufficient amounts is crucial in plant molecular biology and genetic studies. Several methods for RNA extraction from plants are available in the literature, mainly due to the great biochemical diversity present in each species and tissue, which can complicate or prevent the extraction. Psidium guajava (Myrtaceae family) is a perennial fruit tree of medicinal and economic value; nevertheless, only a few molecular studies are available for the species. One reason is the difficulty in obtaining RNA due to the content of the samples, which are rich in polyphenols, polysaccharides, and secondary metabolites. Furthermore, there are few studies available for the isolation of RNA from guava or Psidium samples, which hampers advances in the study of the genus. Here, quality and yields of RNA isolates were compared using six extraction protocols: two protocols based on the application of cetyltrimethylammonium bromide (CTAB) lysis buffer, one protocol which uses the TRIzol reagent, one which applies guanidine thiocyanate lysis buffer followed by organic phase extraction, and two commercial kits (PureLink RNA Mini Kit and RNeasy Plant Mini Kit). The CTAB-based method provided the highest RNA yields and quality for five different tissues (flower bud, immature leaf, young leaf, mature leaf, and root), genotypes, and stress conditions. For the most efficient protocol, the average yield of RNA from guava leaves was 203.06 µg/g of tissue, and the A260/A280 and A260/A230 ratios were 2.1 and 2.2, respectively. RT-qPCR analysis demonstrated that the purity of the samples was sufficient for molecular biology experiments. CTAB-based methods for RNA isolation were found to be the most efficient, providing the highest RNA yields and quality for tissues from P. guajava. Additionally, they were compatible for downstream RNA-based applications, besides being simple and cost-effective.

Air-ozonolysis activation of polyolefins versus use of laden finishing to form contact-active nonwoven materials.

Two synthetic approaches were explored for modification of the polyolefins polyethylene/polypropylene (PE/PP) to form contact-active nonwoven materials. In the first approach, polymer surfaces were activated by O2-free air-ozonolysis, and then the active agent (trimethoxysilyl) propyl-octadecyl-dimethyl-ammonium chloride (C18-TSA) was covalently bound. In the second approach, the active agent was directly conjugated to the commercial 'finishing' that was then applied to the polymer. The chemical, physical and microscopic properties of the modified polymers were comprehensively studied, and their active site density was quantified by fluorescein sodium salt-cetyltrimethylammonium chloride reaction. The antimicrobial activity of the prepared nonwovens against Bacillus subtilis (Gram-positive) and Salmonella enterica (Gram-negative), and their stability at various pHs and temperatures were examined. The two approaches conferred antimicrobial properties to the modified polymers and demonstrated stable linkage of C18-TSA. However, the performance of the nonwovens formed by the first approach was superior. The study suggests two feasible and safe pathways for the modification of polyolefins to form contact-active nonwoven materials that can be further applied in various fields, such as hygiene products, medical fabrics, sanitizing wipes, and more.

Synthesis, Antifungal Activity, and Cytotoxicity of AgBr-NP@CTMAB Hybrid and Its Application in PMMA.

OBJECTIVE: To synthesize and determine the antifungal activity of AgBr-nanoparticles (NP) @CTMAB (cetyltrimethyl-ammonium bromide) against Candida albicans (C. albicans) for use in the field of denture cleaning. METHODS: The morphology and structure of AgBr-NP@CTMAB were characterized by IR, UV-Vis, XRD and SEM. The antifungal potential of AgBr-NP@CTMAB against C. albicans was determined by colony formation assay and growth curve analysis. PMMA containing AgBr-NP@CTMAB was prepared, and the long-term antifungal efficacy was analyzed. The effect against C. albicans biofilm was analyzed by SEM and OD600 , and the color changes of the specimens were observed by stereomicroscopy after 1 week of incubation. Cytotoxicity to human oral gingival fibroblasts and oral mucosal epithelial cells was detected by Cell Counting Kit-8 (CCK-8) in vitro. RESULTS: The compound showed a good crystalline phase, the presence of AgBr nanoparticles and the hybridization of CTMAB+ with AgBr-NPs. AgBr-NP@CTMAB showed significant antifungal activity against C. albicans at concentrations of 10 µg/mL and 20 µg/mL. PMMA specimens containing AgBr-NP@CTMAB showed no long-term antifungal effect against C. albicans biofilm. The clearance rate of C. albicans attached to PMMA was 44.73% after soaking in 10 µg/mL AgBr-NP@CTMAB solution for 30 min and 91.35% for 8 h. There was no significant residual cytotoxicity or visual color change after soaking. SIGNIFICANCE: AgBr-NP@CTMAB showed promising potential treatment for denture cleaners.