Synthesis of new quaternized chitosan Schiff bases and their N-alkyl derivatives as antimicrobial and anti-biofilm retardants in membrane technology.

New quaternized salicylidene chitosan Schiff bases (QSCSBs) and their N-octyl derivatives (OQCs) have been synthesized and characterized, aiming to develop innovative antimicrobial and anti-biofilm agents. This research holds immense potential, as these compounds could be utilized as anti-biofouling additives in membrane technology in the future. The synthesis involved the modification of low molecular-weight-chitosan (LMC) through simultaneous Schiff base formation and quaternization processes to create QSCSBs. Subsequently, QSCSBs were catalytically reduced to form quaternized N-benzyl chitosan (QBCs) intermediates, which then underwent nucleophilic substitution reactions affording N-octyl quaternized chitosans (OQCs). Characterization techniques such as elemental, spectral, and microscopic analyses were used to confirm the successful synthesis of these materials. As membrane technology relies on surface charge, QSCSBs and OQCs with large zeta potentials could be used as positively charged additives. Moreover, SEM image revealed the regular distribution of pores and voids across the additives' surfaces raises intriguing questions about their implications for membrane performance. Meanwhile, the superior antibacterial and antibiofilm potential of these materials, particularly QSCSB2 and OQC2, indicate that the utilization of these compounds as anti-biofouling additives in membrane technology could significantly improve the performance and longevity of membranes used in various applications such as water treatment and desalination.

Synthesis, characterization and antifungal properties of maleopimaric anhydride modified chitosan.

Fruit spoilage can cause huge economic losses, in which fungal infection is one of the main influencing factors, how to effectively control mould and spoilage of fruits and prolong their shelf-life has become a primary issue in the development of fruit and vegetable industry. In this study, rosin derivative maleopimaric anhydride (MPA) was combined with biodegradable and antifungal chitosan (CS) to enhance its antifungal and preservative properties. The modified compounds were characterized by FTIR, 1H NMR spectra and XRD, and the in vitro antifungal properties of the modified compounds were evaluated by the radial growth assay and the minimal inhibitory concentration assay. The preservation effect on small mandarin oranges and longan was studied. The analysis revealed that the modification product (CSMA) of MPA access to C6-OH of CS had a better antifungal effect. In addition, CSMA was more environmentally friendly and healthier than the commercially available chemical preservative (Imazalil), and had the same antifungal preservative effect in preserving small mandarin orange, and was able to extend the shelf life to >24 d. In the preservation of longan, CSMA was more effective against tissue water loss and was able to maintain the moisture in the longan pulp and extend the shelf life. Therefore, CSMA has good application potentials in longan keeping-fresh.

In vitro assessment of interaction between lidocaine hydrochloride and irrigating solutions on root canal dentin: a scanning electron microscope study / Evaluación in vitro de la interacción entre el clorhidrato de lidocaína y las soluciones de irrigación en la dentina del conducto radicular: un estudio con microscopio electrónico de barrid

Aim: To investigate the precipitate formed from the interaction between 2% lidocaine hydrochloride with adrenaline (LA) with 2.5% sodium hypochlorite (NaOCl) and 0.2% chitosan nanoparticles on root canal dentin, using scanning electron microscopy (SEM). Material and Methods: Sixty mandibular premolars were decoronated, and the root length standardised. The specimens were randomly distributed into the following groups: Group 1 (control): 2% LA mixed with sterile water without root canal instrumentation, Group 2: 2% LA with 2.5% NaOCl in water without root canal instrumentation, and Group 3: 2% LA with 0.2% chitosan nanoparticles in water without root canal instrumentation. Teeth specimens were split and subjected to SEM analysis at cervical, middle, and apical root thirds. On observing precipitate formation in Group 2, 10 premolars were decoronated and treated with 2% LA and 2.5% NaOCl and subjected to root canal instrumentation. Results: Group 1 and Group 3 showed patent dentinal tubules and no precipitate formation. Group 2 showed precipitate blocking dentinal tubules in all the three sections, and the precipitate could not be removed completely after cleaning and shaping. Conclusion: NaOCl forms an insoluble precipitate on interaction with local anaesthetic solution that cannot be removed after chemo-mechanical preparation. Chitosan nanoparticles do not form any such precipitate and show patent dentinal tubules. Hence, chitosan can be used as a flushing irrigant.

Objetivo: Investigar el precipitado formado a partir de la interacción entre el clorhidrato de lidocaína al 2% con adrenalina (LA), el hipoclorito de sodio al 2,5% (NaOCl) y nanopartículas de quitosano al 0,2% en la dentina del conducto radicular, mediante microscopía electrónica de barrido (SEM). Material y Métodos: Se decoraron 60 premolares mandibulares y se estandarizó la longitud de la raíz. Los especímenes se distribuyeron aleatoriamente en los siguientes grupos: Grupo 1 (control): 2% la que fue mezclado con agua estéril sin instrumentación del conducto radicular, Grupo 2: 2% LA con 2,5% de NaOCl sin instrumentación del conducto radicular y Grupo 3: 2 % LA con 0,2% de nanopartículas de quitosano sin instrumentación del conducto radicular. Las muestras de dientes se dividieron y se sometieron a análisis SEM en los tercios radiculares cervical, medio y apical. Al observar la formación de precipitado en el Grupo 2, 10 premolares fueron decorados y tratados con LA al 2% y NaOCl al 2,5% y sometidos a instrumentación de conductos radiculares. Resultado: El Grupo 1 y el Grupo 3 mostraron túbulos dentinarios permeables y sin formación de precipitados. El grupo 2 mostró precipitado que bloqueaba los túbulos dentinarios en las tres secciones, y el precipitado no se pudo eliminar por completo después de limpieza y conformación. Conclusión: el NaOCl forma un precipitado insoluble al interactuar con la solución anestésica local que no se puede eliminar después de la preparación quimiomecánica. Las nanopartículas de quitosano no forman ningún precipitado de este tipo y muestran túbulos dentinarios permeables. Por lo tanto, el quitosano se puede utilizar como irrigante para el lavado.

Self-assembled chitosan derived microparticles inhibit tumor angiogenesis and induce apoptosis in Ehrlich-ascites-tumor bearing mice.

Self-assembled microparticles from chitosan (SAMC) was prepared by depolymerization induced by potassium persulfate. Particle size distribution data showed averaged around 5 µm size and SEM indicated the sequential formation of "RBC" shaped particles. Soluble SAMC consists of 'deacetylated' residues as revealed by 13C NMR. SAMC showed antitumor efficacy in human breast cancer cell lines through mitigation in cell proliferation, colony formation and cell migration. Anti-tumor and anti-angiogenic properties of SAMC was found in vivo Ehrlich ascites tumor (EAT) bearing mice model resulting in tumor growth inhibition (EAT control, 17.4 ml; SAMC treated, 6.8 ml) and improved survival potency (15 days). Moreover, the decrease in ascites VEGF secretion (EAT control, 1354 ng; SAMC treated, 351 ng) accompanied with reduction in neovessel formation. Apoptosis induction by SAMC was confirmed by DNA fragmentation, caspase activities and fluorescence staining methods respectively. SAMC may be a safe candidate for anti-tumor dietary supplement production in food industry.

Injectable glycol chitosan thermogel formulation for efficient inner ear drug delivery.

We prepared a new injectable thermogel to enhance the efficiency of inner ear delivery of dexamethasone (DEX). Hexanoyl glycol chitosan (HGC) was synthesized and evaluated as an amphiphilic thermogel (Tgel ~ 32 °C) for use as a solubilizing agent as well as an injectable carrier for intratympanic delivery of the hydrophilic and hydrophobic forms of DEX. Various thermogel formulations with different drug types and concentrations were prepared, and their physicochemical and thermogelling properties were characterized by 1H NMR, ATR-FTIR, and rheometer. They exhibited versatile release kinetics from several hours to more than 2 weeks, depending on drug type and concentration. Our formulations further showed good residual stability for more than 21 days without any cytotoxicity or inflammation in the middle and inner ear and could deliver a considerably high drug concentration into the inner ear. Therefore, HGC thermogel has great potential as an effective and safe formulation for inner ear drug delivery.

Microstructure and properties of thermomechanically processed chitosan citrate-based materials.

The traditional solvent casting method for preparing chitosan-based materials has limited productivity relative to the productivity of thermomechanical processing. Consequently, the thermomechanical processing technique was evaluated as a way to increase chitosan production. The role of citric acid (CA) as a destructuring and crosslinking agent during such processing was examined. SEM images revealed robust fibers that were associated with a superior mechanical strength (145%), which were produced after thermomechanical processing of chitosan in the presence of CA. Based on articles reviewed, this is the first time that this structure has been closely observed in the microstructure of chitosan-based materials. FTIR and XRD characterization showed the occurrence of chemical crosslinking and the successful destructuring of chitosan powder by CA during processing. Compared to acetic acid, the use of CA led to the development of materials with a homogeneous morphology and good physicochemical and mechanical properties that are suitable for biomedical applications.

Photo-induced adhesive carboxymethyl chitosan-based hydrogels with antibacterial and antioxidant properties for accelerating wound healing.

Designing adhesive hydrogel wound dressings with inherent antibacterial and antioxidant properties is desirable to treat cutaneous full-thickness injuries in clinical care. Herein, a series of photo-induced Schiff base crosslinking-based adhesive hydrogels with promising traits are designed and prepared through Diels-Alder (DA) reactions between functional groups-grafted carboxymethyl chitosan (CMCS) and a photo-responsive polyethylene glycol (PEG) crosslinker. The quaternary ammonium and phenol groups in modified CMCS endows hydrogels excellent antibacterial and antioxidant properties. Upon UV (365 nm) irradiation, the generated o-nitrosobenzaldehyde from the photo-isomerization of o-nitrobenzyl in PEG derivative can subsequently crosslink with amino groups on tissue interfaces via Schiff base, endowing the hydrogel with well adhesiveness. Additionally, the hydrogel exhibits good BSA adsorption capacity, cytocompatibility and hemostatic property. The in vivo full-thickness skin defect study on mice indicates that the multi-functional hydrogel with considerable collagen deposition and vascularization capacities can be an effective and promising adhesive dressing for improving wound healing.

Biodegradability, physical, mechanical and antimicrobial attributes of starch nanocomposites containing chitosan nanoparticles.

This study aimed to develop a plasticized starch (PS) based film loaded with chitosan nanoparticles (CNPs, 1, 2, 3, and 4%) as a reinforcing and antibacterial agent. We examined the morphology, biodegradability, mechanical, thermo-mechanical, and barrier properties of the PS/CNPs films. The antimicrobial activity against both Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria was investigated by colony forming unit (CFU) and disc diffusion methods. A dense structure was obtained for all PS/CNPs films and, thus, their complete biodegradation occurred in more days than neat PS. The increase in the CNPs percentage led to improved mechanical behaviour and barrier properties. PS-CNPs composite films revealed inhibition zones against both E. coli and S. aureus, with the 100% reduction in CFU against S. aureus. The current study exhibited that PS-CNPs films were more effective in inhibiting bacteria growth than neat PS film, confirming the composite films potential application as antimicrobial food packaging.

Chitin and derivative chitosan-based structures - Preparation strategies aided by deep eutectic solvents: A review.

The high molecular weight of chitin, as a biopolymer, challenges its extraction due to its insolubility in the solvents. Also, chitosan, as the N-deacetylated form of chitin, can be employed as a primary material for different industries. The low mechanical stability and poor plasticity of chitosan films, as a result of incompatible interaction between chitosan and the used solvent, have limited its industrialization. Deep eutectic solvents (DESs), as novel solvents, can solve the extraction difficulties of chitin, and the low mechanical stability and weak plasticity of chitosan films. Also, DESs can be considered for the different chitosan and chitin productions, including chitin nanocrystal and nanofiber, N,N,N-trimethyl-chitosan, chitosan-based imprinted structures, and DES-chitosan-based beads and monoliths. This review aims to focus on the preparation and characterization (chemistry and morphology) of DES-chitin-based and DES-chitosan-based structures to understand the influence of the incorporation of DESs into the chitin and chitosan structure.

Synthesis, characterization and application of chitosan-N-(4-hydroxyphenyl)-methacrylamide derivative as a drug and gene carrier.

The aim of this study was to develop a green method to fabricate a novel CS modified N-(4-hydroxyphenyl)- methacrylamide conjugate (CSNHMA) and to evaluate its biomedical potential. CSNHMA has been prepared by a simple method via aza Michael addition reaction between CS and N- (4-hydroxyphenyl)-methacrylamide (NHMA) in ethanol. Its structural and morphological properties were characterized by various analysis techniques. The obtained results confirmed that a highly porous network structure of CSNHMA was successfully synthesized via aza Michael addition reaction. Consequently, it was analyzed as a drug and gene carrier. CSNHMA/pGL3 showed an enhanced buffering capacity due to the presence of NHMA moiety leading to higher transfection efficiency in all cancer cells (A549, HeLa and HepG2) as compared to native CS and Lipofectamine®. Therefore, these findings clearly support the possibility of using CSNHMA as a good transfection agent. For in vitro drug release study, we prepared CSNHMA nanoparticles (NPs) and curcumin loaded CSNHMA NPs of size <230 nm respectively via the non-toxic ionic gelation route and the encapsulation efficiency of drug was found to be 77.03%. In vitro drug release studies demonstrated a faster and sustained release of curcumin loaded CSNHMA NPs at pH 5.0 compared to physiological pH.

Polyethylenimine grafted-chitosan based Gambogic acid copolymers for targeting cancer cells overexpressing transferrin receptors.

Recent advancements in gene delivery systems that specifically target a variety of cancer types have increased demand for tissue-specific gene therapy. The current study describes the synthesis of a copolymer (GPgWSC) composed of a polyethylenimine (PEI)-grafted water-soluble chitosan (WSC) and gambogic acid (GA). It was validated as a ligand capable of enabling targeted attachment to transferrin receptors in HCT116 cancer cell lines. GPgWSC demonstrated superior antitumor activity in vitro in HCT116 compared to LoVo or MCF-7 cell lines, facilitated by the apoptotic activity of psiRNA-hBCL2. Pre-incubation of transferrin significantly inhibited GFP expression in the GPgWSC polyplex, demonstrating that GA is an extremely effective transferrin receptor targeting molecule. Additionally, in the HCT116-bearing mouse model, the tumor mass of PBS-treated mice increased to 2270 mm2 after 22 days, but the injection of GPgWSC polyplex significantly reduced the mass-increasing rate as a mass size of 248 mm2.

Relationship between phosphorylamine-modification and molecular weight on transfection efficiency of chitosan.

The aim of this study is both to design the chitosan (Chi) nanoparticles with different Mw containing the phosphoester bonds and increase their amino function for the transfection. The phosphorylamine-modification of Chi and depolymerized Chi (DChi) was realized using o-phosphorylethanolamine (o-PEA) and characterized, for the first time. The nanoparticles (nMChi and nMDChi) were prepared by ionic gelation and their particle size, polydispersity index (PDI), zeta potential, stability, gene binding capacity and cytotoxicity were examined. The effects of the Mw of Chi on the cytotoxicity, gene binding capacity, and in vitro transfection efficiency of the nanoparticles on Human Embryonic Kidney 293 (HEK293) cells were also examined. Green Fluorescent Protein Circular Plasmid DNA (pEGFN1) loaded nanoparticles (gnMChi and gnMDChi) were used in the transfection. This study showed that the Mw of phosphorylamine-modified Chi significantly affected the characteristics, cytotoxicity, gene binding capacity and transfection efficiency of the nanoparticles.

A 4arm-PEG macromolecule crosslinked chitosan hydrogels as antibacterial wound dressing.

In order to develop better wound dressings, a novel chitosan hydrogel (Cn-Nm gel) was designed and fabricated by using aldehyde-4-arm polyethylene glycol (4r-PEG-CHO) to crosslink the chitosan dissolved in alkaline solution, amino-4-arm polyethylene glycol (4r-PEG-NH2) was chosen as the additive simultaneously. The special dissolution technique and macromolecular crosslinking structure endows the Cn-Nm gels with better performance than that of gels prepared by acid dissolving method with micromolecule crosslinker. First, Cn-Nm gels own strong toughness with 500 kPa tensile strength and 1000% elongation, about 400% swelling ratio and fast water absorption rate. Second, about 300 kPa adhesive strength and strippability between the gels and skin is achieved. More importantly, Cn-Nm gels show nearly 100% antibacterial rate towards Escherichia coli and Staphylococcus aureus. Excellent biocompatibility is also proved by the mouse fibroblasts tests. All of the performance makes this developed chitosan-based gel be the potential candidate as a wound dressing.

Amphiphilic quaternized chitosan: Synthesis, characterization, and anti-cariogenic biofilm property.

Hydrophobized chitosan derivatives, hexyl chitosan (HCS), dodecyl chitosan (DCS), and phthaloyl chitosan (PhCS) of approximately 30 and 50% degree of substitution (%DS) reacted with glycidyltrimethylammonium chloride (GTMAC) to incorporate hydrophilic positively charged groups of N-[(2-hydroxyl-3-trimethylammonium)propyl] and yielded amphiphilic quaternized chitosan derivatives. They can assemble into spherical nanoparticles with a hydrodynamic diameter of ~100-300 nm and positive ζ-potential values (+15 to +56). Their anti-biofilm efficacy was evaluated against the dental caries pathogen, Streptococcus mutans. Among all derivatives, the one having 30%DS of hexyl group and prepared by reacting with 1 mol equivalent of GTMAC (H30CS-GTMAC) showed the best performance in terms of its aqueous solubility, the lowest minimum inhibitory concentration (138 µg/mL) and the minimum bactericidal concentration (275 µg/mL) which are superior to the unmodified chitosan. Its equivalent anti-biofilm efficacy to that of chlorhexidine suggests that it can be a greener antibacterial agent for oral care formulations.

Synthesis and characterization of chitosan-PVA hydrogel containing PEGylated recombinant epidermal growth factor on cell culture for wound healing substitute

Abstract The aim of the current study was to assess the physicochemical characteristics and wound healing activity of chitosan-polyvinyl alcohol (PVA) crosslinked hydrogel containing recombinant human epidermal growth factor (rh-EGF) or recombinant mouse epidermal growth factor (rm-EGF). The hydrogels were prepared and analyses were made of the morphological properties, viscosity, water absorption capacity, mechanical and bio-adhesive properties. The viscosity of the formulations varied between 14.400 - 48.500 cPs, with the greatest viscosity values determined in K2 formulation. F2 formulation showed the highest water absorption capacity. According to the studies of the mechanical properties, H2 formulation (0.153±0.018 N.mm) showed the greatest adhesiveness and E2 (0.245±0.001 mj/cm2) formulation, the highest bio-adhesion values. Hydrogels were cytocompatible considering in vitro cell viability values of over 76% on human keratinocyte cells (HaCaT, CVCL-0038) and of over 84% on human fibroblast cells (NIH 3T3, CRL-1658) used as a model cell line. According to the BrdU cell proliferation results, B1 (197.82±2.48%) formulation showed the greatest NIH 3T3 and C1 (167.43±5.89%) formulation exhibited the highest HaCaT cell proliferation ability. In addition, the scratch closure assay was performed to assess the wound healing efficiency of formulation and the results obtained in the study showed that F2 formulation including PEGylated rh-EGF had a highly effective role.

Injectable, Intrinsically Antibacterial Conductive Hydrogels with Self-Healing and pH Stimulus Responsiveness for Epidermal Sensors and Wound Healing.

Torealize intelligent and personalized medicine, it is a huge challenge to develop a hydrogel dressing that can be used as a sensor to monitor human health in real-time while promoting wound healing. Herein, an injectable, self-healing, and conductive chitosan-based (CPT) hydrogel with pH responsiveness and intrinsic antibacterial properties was fabricated via a Schiff base linkage and a hydrogen bond. Due to the introduction of Schiff base bonds, the injectable CPT hydrogel exhibits various excellent properties, such as pH responsiveness to sol-gel transition, self-healing properties, and broad-spectrum antibacterial properties even without additional antibacterial agents. In vitro experiments verify the excellent biocompatibility of the as-prepared hydrogel. An in vivo experiment in a mouse full-thickness skin-wound model was performed to confirm the outstanding effect on wound healing. Meanwhile, as epidermal sensors, the conductive hydrogel that perceives various human activities in real-time could provide the real-time analysis of the patient's healthcare information. Based on these excellent properties, the CPT hydrogel, as a biological dressing with a sensing function, lays a solid foundation for the further realization of personalized medicine.

A lingering mouthwash with sustained antibiotic release and biofilm eradication for periodontitis.

Dental plaque biofilms are believed to be one of the principal virulence factors in periodontitis resulting in tooth loss. Traditional mouthwashes are limited due to the continuous flow of saliva and poor drug penetration ability in the biofilm. Herein, we fabricated an antibiotic delivery platform based on natural polysaccharides (chitosan and cyclodextrin) as a novel mouthwash for the topical cavity delivery of minocycline. The penetration and residence mechanisms demonstrate that the platform can prolong the residence time up to 12 h on biofilms. Furthermore, sustained release can enhance the penetration of drugs into biofilms. In vitro antibiofilm experimental results indicated that the mouthwash effectively kills bacteria and eradicate biofilms. Effective treatment in vivo was confirmed by the significantly reduced dental plaque and alleviated inflammation observed in a rat periodontitis model. In summary, this novel platform can improve antibiofilm efficiency and prevent drugs from being washed away by saliva, which may provide benefits for many oral infectious diseases.

Hydroxyapatite grafted chitosan/laponite RD hydrogel: Evaluation of the encapsulation capacity, pH-responsivity, and controlled release behavior.

In this study, a pH-responsive drug carrier was developed for the controllable release of drugs in the gastric environment. Chitosan (CS), a pH-sensitive biopolymer, and laponite RD (LAP), a nano-clay with a high drug-loading capability, were used to design the new carrier. Hydroxyapatite (HA) was grafted into CS/LAP matrix through a simple co-precipitation technique to overcome the burst release of the CS/LAP. The structural analysis and swelling tests of products demonstrated that the co-precipitation method has led to the penetration of HA nanoparticles inside the CS/LAP matrix and occupying its hollow pores. Occupation of the empty pores can lead to the entrapment of drug molecules, thereby reducing the release rate. The nanocomposite showed a high loading capacity to ofloxacin as a drug model. The effects of HA content on release behavior of nanocomposite were investigated at simulated gastric (pH 1.2) and intestine (pH 7.4) environments. The results indicated a high pH sensitivity for CS/LAP/HA. HA grafting reduced the release rate remarkably regardless of pH. The release rate of CS/LAP/HA decreased by 44-63% in pH 1.2 and 41-51% in pH 7.4 compared to CS/LAP. Kinetic studies indicated that grafting the HA in CS/LAP has changed the drug release mechanism.

A Novel Carbon Dots/Thermo-Sensitive In Situ Gel for a Composite Ocular Drug Delivery System: Characterization, Ex-Vivo Imaging, and In Vivo Evaluation.

We developed a potential composite ocular drug delivery system for the topical administration of diclofenac sodium (DS). The novel carbon dot CDC-HP was synthesized by the pyrolysis of hyaluronic acid and carboxymethyl chitosan through a one-step hydrothermal method and then embedded in a thermosensitive in situ gel of poloxamer 407 and poloxamer 188 through swelling loading. The physicochemical characteristics of these carbon dots were investigated. The results of the in vitro release test showed that this composite ocular drug delivery system (DS-CDC-HP-Gel) exhibited sustained release for 12 h. The study of the ex vivo fluorescence distribution in ocular tissues showed that it could be used for bioimaging and tracing in ocular tissues and prolong precorneal retention. Elimination profiles in tears corresponded to the study of ex vivo fluorescence imaging. The area under the curve of DS in the aqueous humor in the DS-CDC-HP-Gel group was 3.45-fold that in the DS eye drops group, indicating a longer precorneal retention time. DS-CDC-HP with a positive charge and combined with a thermosensitive in situ gel might strengthen adherence to the corneal surface and prolong the ocular surface retention time to improve the bioavailability. This composite ocular delivery system possesses potential applications in ocular imaging and drug delivery.

Polymorphism of chitosan-based networks stabilized by phytate investigated by molecular dynamics simulations.

Chitosan can associate in the presence of polyphosphates into insoluble hydrogels capable of drug encapsulation and safe and efficient release. On the one hand, chitosan hydrogels were synthesized using the phytate anion as a crosslinking agent and were characterized by employing dynamic light scattering (DLS) and Fourier transform infrared spectroscopy (FTIR). On the other hand, an effective chitosan-phytate model with atomistic details was created to examine the underlying physical crosslinking pattern, and the structure and dynamics of the chitosan-phytate complex were systematically investigated by using molecular dynamics (MD) simulations. To harbor the crosslinker potential for obtaining chitosan-based hydrogels, the impact of the phytate concentration and the functional groups of the chitosan on the reticulation process was addressed. The phytate association was determined by the phosphates' capacity for H-bonding to the amine and hydroxyl groups belonging to two consecutive glucosidic units. The physical crosslinking pattern was determined by the number of chitosan chains bound by one phytate anion and the phytate orientation relative to the glucopyranose neighbors. Cross-linking of two up to six chitosan chains mediated by a phytate anion represented favorable states, and the number distribution of cross-linked chains depended on the phytate concentration. The circular distribution of the cross-linkable phosphates regulated the nearly isotropic orientation of the chitosan chains and phytate at the junction, and the variety of topological crosslinking demonstrated the phytate ion's potential for developing chitosan-based hydrogels with improved structural attributes.