The Preparation and Physiochemical Characterization of Tenebrio molitor Chitin Using Alcalase.

Chitin is mostly produced from crustaceans, but it is difficult to supply raw materials due to marine pollution, and the commonly used chemical chitin extraction method is not environmentally friendly. Therefore, this study aims to establish a chitin extraction process using enzymes and to develop edible insect-derived chitin as an eco-friendly new material. The response surface methodology (RSM) was used to determine the optimal conditions for enzymatic hydrolysis. The optimal conditions for enzymatic hydrolysis by RSM were determined to be the substrate concentration (7.5%), enzyme concentration (80 µL/g), and reaction time (24 h). The solubility and DDA of the mealworm chitosan were 45% and 37%, respectively, and those of the commercial chitosan were 61% and 57%, respectively. In regard to the thermodynamic properties, the exothermic peak of mealworm chitin was similar to that of commercial chitin. In the FT-IR spectrum, a band was observed in mealworm chitin corresponding to the C=O of the NHCOCH3 group at 1645 cm-1, but this band showed low-intensity C=O in the mealworm chitosan due to deacetylation. Collectively, mealworm chitosan shows almost similar physical and chemical properties to commercial chitosan. Therefore, it is shown that an eco-friendly process can be introduced into chitosan production by using enzyme-extracted mealworms for chitin/chitosan production.

Morphological study of electrospun chitosan/poly(vinyl alcohol)/glycerol nanofibres for skin care applications.

This study aimed to evaluate the influence of formulation and procedure parameters in obtaining thick and continuous chitosan/PVA/glycerol nanofibres to be applied in skin care. For that, the polymers were characterized by nuclear magnetic resonance, Fourier-transform infrared spectroscopy, and size-exclusion chromatography. After this, 96 chitosan/PVA/glycerol nanofibre scaffolds were prepared by electrospinning method, using factorial designs. The independent variables were crude and pure chitosan, 2 brands of PVA, 2 needle gauges, high and low polymer concentration, high and low glycerol concentration, and final solution with and without ultrafiltration. Morphological analysis was performed by scanning electron microscopy, atomic force microscopy, and confocal microscopy. The best sample (NF67) presented an average thickness of 268.3 nm, uniform distribution, and high yield. It was obtained at a 1:3.5 (crude chitosan: PVA with lower molecular weight, but more hydrolysed) ratio and lower glycerol concentration, suggesting that the degree of hydrolysis of the PVA is more important than its molecular weight for obtaining better quality nanofibres and that the glycerol also makes the electrospinning process difficult. Thus, it was possible to choose parameters that provide scaffolds that could be applied as a matrix extracellular-like material in wound healing.

Preparation and Antimicrobial Activity of Chitosan and Its Derivatives: A Concise Review.

Despite the advantages presented by synthetic polymers such as strength and durability, the lack of biodegradability associated with the persistence in the environment for a long time turned the attention of researchers to natural polymers. Being biodegradable, biopolymers proved to be extremely beneficial to the environment. At present, they represent an important class of materials with applications in all economic sectors, but also in medicine. They find applications as absorbers, cosmetics, controlled drug delivery, tissue engineering, etc. Chitosan is one of the natural polymers which raised a strong interest for researchers due to some exceptional properties such as biodegradability, biocompatibility, nontoxicity, non-antigenicity, low-cost and numerous pharmacological properties as antimicrobial, antitumor, antioxidant, antidiabetic, immunoenhancing. In addition to this, the free amino and hydroxyl groups make it susceptible to a series of structural modulations, obtaining some derivatives with different biomedical applications. This review approaches the physico-chemical and pharmacological properties of chitosan and its derivatives, focusing on the antimicrobial potential including mechanism of action, factors that influence the antimicrobial activity and the activity against resistant strains, topics of great interest in the context of the concern raised by the available therapeutic options for infections, especially with resistant strains.

Chitosan/Hyaluronic acid/Alginate and an assorted polymers loaded with honey, plant, and marine compounds for progressive wound healing-Know-how.

Biomaterials are being extensively used in regenerative medicine including tissue engineering applications, as these enhance tissue development, repair, and help in the process of angiogenesis. Wound healing is a crucial biological process of regeneration of ruptured tissue after getting injury to the skin and other soft tissue in humans and animals. Besides, the accumulation of microbial biofilms around the wound surface can increase the risk and physically obstruct the wound healing activity, and may even lead to amputation. Hence, in both acute and chronic wounds, prominent biomaterials are required for wound healing along with antimicrobial agents. This review comprehensively addresses the antimicrobial and wound healing effects of chitosan, chitin, cellulose acetate, hyaluronic acid, pullulan, bacterial cellulose, fibrin, alginate, etc. based wound dressing biomaterials fabricated with natural resources such as honey, plant bioactive compounds, and marine-based polymers. Due to their excellent biocompatibility and biodegradability, bioactive compounds derived from honey, plants, and marine resources are commonly used in biomedical and tissue engineering applications. Different types of polymer-based biomaterials including hydrogel, film, scaffold, nanofiber, and sponge dressings fabricated with bioactive agents including honey, curcumin, tannin, quercetin, andrographolide, gelatin, carrageenan, etc., can exhibit significant wound healing process in, diabetic wounds, diabetic ulcers, and burns, and help in cartilage repair along with good biocompatibility and antimicrobial effects. Among the reviewed biomaterials, carbohydrate polymers such as chitosan-based biomaterials are prominent and widely used for wound healing applications followed by hyaluronic acid and alginate-based biomaterials loaded with honey, plant, and marine compounds. This review first provides an overview of the vast natural resources used to formulate different biomaterials for the treatment of antimicrobial, acute, and chronic wound healing processes.

CNTs-CaP/chitosan-coated AZ91D magnesium alloy extract promoted rat dorsal root ganglia neuron growth via activating ERK signalling pathway.

Increasing attention has been paid on the application of biodegradable materials such as magnesium and its alloys in neuron repair. AZ91D magnesium alloy coated with carbon nanotubes (CNTs) and/or calcium phosphate (CaP)/chitosan (CS) was fabricated in this study. To evaluate the bioactivity of these AZ91D-based composites, the extracts were prepared by immersing samples in modified simulated body fluid (m-SBF) for 0, 2, 8, 16, 24, 34, 44, 60, or 90 days. Immunofluorescence staining for neuronal class III ß-tubulin (TUJ1) revealed that both CNTs-CaP/CS-AZ91D and CaP/CS-AZ91D extracts promoted axon outgrowth of dorsal root ganglia (DRG) neurons, accompanied with increased expression of phosphorylated focal adhesion kinase (p-FAK) and growth associated protein-43 (GAP-43). Besides, the extracts increased the expression and the release of neurotrophic factors including nerve growth factor (NGF) and brain-derived neurotrophic factor (BDNF). ERK signalling was activated in DRG neurons after treating with either CNTs-CaP/CS-AZ91D or CaP/CS-AZ91D extracts, and its inhibition with U0126 counteracted the beneficial effects of these extracts on DRG neuron. Overall, the extracts from these AZ91D-based composites might promote DRG neuron growth via activating ERK signalling pathway. Notably, CNTs-CaP/CS-AZ91D extracts showed a better promoting effect on neuron growth than CaP/CS-AZ91D. Assessment of ion elements showed that the addition of CNTs coating enhanced magnesium corrosion resistance and reduced the deposition of calcium and phosphorus on the surface of CaP/CS-AZ91D alloy. These findings demonstrate that CNTs-CaP/CS-AZ91D likely provide a more suitable environment for neuron growth, which suggests a potential implantable biomaterial for the treatment of nerve injury. SIGNIFICANCE: AZ91D magnesium alloy coated with carbon nanotubes (CNTs) and/or calcium phosphate (CaP)/chitosan (CS) was fabricated and their immersion extracts were prepared using modified simulated body fluid in this study. Both extracts from CNTs-CaP/CS and CaP/CS-coated AZ91D magnesium alloy promotes rat dorsal root ganglia (DRG) neuron growth via activating ERK signalling pathway. Notably, the addition of CNTs improves the performance of CaP/CS-AZ91D. For the first time, our research demonstrates that CNTs-CaP/CS-AZ91D likely provide a suitable environment for neuron growth, suggesting these AZ91D-based composites as potential implantable biomaterials for the treatment of nerve injury.

The interactions between chiral analytes and chitosan-based chiral stationary phases during enantioseparation.

The goal of the present study was to disclose the interactions between chitosan-type chiral selectors (CSs) and chiral analytes during enantioseparation. Hence, six chitosan 3,6-bis(phenylcarbamate)-2-(cyclohexylmethylurea)s were synthesized and characterized. These chitosan derivatives were employed as CSs with which the corresponding coated-type chiral stationary phases (CSPs) were prepared. According to the nature and position of the substituents on the phenyl group, the CSs and CSPs were divided into three sets. The counterparts of the three sets were 3,5-diMe versus 3,5-diCl, 4-Me versus 4-Cl and 3-Me versus 3-Cl. The enantioseparation capability of the CSPs was evaluated with high-performance liquid chromatography. The CSPs demonstrated a good enantioseparation capability to the tested chiral analytes. In enantioselectivity, the CSs with 3,5-diCl and with 4-Me roughly were better than the counterparts with 3,5-diMe and with 4-Cl respectively. The CS with 3-Me enantiomerically recognized more analytes than the one with 3-Cl, but showed lower separation factors in more enantioseparations. The acidity of the amide hydrogen in the phenylcarbamates was investigated with density functional theory calculations and 1H NMR measurements. The trend of the acidity variation with different substituents on the phenyl group was confirmed by the retention factors of acetone on the CSPs. Compared the retention factors of analytes on every set of the counterparts, the formation of hydrogen bond (HB) in enantioseparation could be outlined as follows: when the CSs interacted with chiral analytes without reactive hydrogen but with lone paired electrons, the carbamate N‒Hs in the CSs were HB donors and the analytes were HB acceptors; if the CSs interacted with analytes with a reactive hydrogen, the role of the CSs in HB formation was related to the acidity of the reactive hydrogen; the patterns of HB formation between the CSs and analytes were also impacted by compositions of mobile phases, in addition to the nature, number and position of substituents on the phenyl group. Based on the discussion, chiral recognition mechanism could be understood in more detail. Besides, the strategy to improve enantioseparation capability of a CSP by introducing a substituent onto phenyl group was clarified and further comprehended.

Fabrication and characterization of Rhizochitosan and its incorporation with platelet concentrates to promote wound healing.

Composite dressing composed of Rhizochitosan and Regenplex™ to promote wound healing were assessed. Rhizochitosan was fabricated by deacetylation of Rhizochitin, which obtained by simply depigmenting sporangium-free mycelial mattress produced from Rhizopus stolonifer F6. Physicochemical characterizations of Rhizochitosan demonstrated that it contained 13.5% chitosan with a water-absorption ability of 35-fold dry weight and exhibiting hydrogel nature after hydration. In a wound-healing study on SD rats with full-thickness injury, the composite dressing had a better healing effect than those for each individual components and control group and wound even healed as functional tissue instead of scar tissue. The underlying mechanism of the composite beneficial to wound remodeling is likely attributable to a more reduction level of matrix metalloproteinase (MMP)-9 expression in early stage and a higher MMP-2 expression level in a later stage of healing process. Conclusively, the composite dressing demonstrated to be highly beneficial to the healing of full-thickness injury wound.

Preparation of chitosan from waste shrimp shells fermented with Paenibacillus jamilae BAT1.

In this study, chitin extraction from shrimp shell powder (SSP) using locally isolated Paenibacillus jamilae BAT1 (GenBank: MN176658), the preparation of chitosan from the extracted chitin, and the characterization and biological activity (antimicrobial and antioxidant) of the prepared chitosan (PC) were investigated. It was determined that P. jamilae BAT1 did not have chitinase activity but showed high protease activity and protein removal potential. Optimum pH, shell concentration and incubation time for deproteinization were determined as 7.0, 60 g/L and 4 days, respectively. Addition of KH2PO4 or MgSO4 did not affect chitin extraction and deproteinization yield. The maximum yields of deproteinization, demineralization and chitin extraction yields were 87.67, 41.95 and 24.5%, respectively. The viscosity-average molecular weight of PC was determined as 1.41 × 105 g/mol. The deacetylation degree of PC (86%) was found to be higher that of commercial chitosan (CC) (78%). DPPH scavenging activity of PC (IC50 0.59 mg/mL) was higher than that of CC (IC50 3.72 mg/mL). PC was found to have higher antimicrobial activity against the bacteria E. coli and S. aureus and the yeast C. albicans when compared to CC. This is the first study on the use of the bacterium P. jamilae in biological chitin extraction.

Chemical Proprieties of Biopolymers (Chitin/Chitosan) and Their Synergic Effects with Endophytic Bacillus Species: Unlimited Applications in Agriculture.

Over the past decade, reckless usage of synthetic pesticides and fertilizers in agriculture has made the environment and human health progressively vulnerable. This setting leads to the pursuit of other environmentally friendly interventions. Amongst the suggested solutions, the use of chitin and chitosan came about, whether alone or in combination with endophytic bacterial strains. In the framework of this research, we reported an assortment of studies on the physico-chemical properties and potential applications in the agricultural field of two biopolymers extracted from shrimp shells (chitin and chitosan), in addition to their uses as biofertilizers and biostimulators in combination with bacterial strains of the genus Bacillus sp. (having biochemical and enzymatic properties).

Multifunctional bioactive chitosan/cellulose nanocrystal scaffolds eradicate bacterial growth and sustain drug delivery.

Chitosan-based hydrogels have received significant interest in tissue engineering and regenerative medicine applications owing to their superior biocompatibility. However, their applications are restricted owing to their weak mechanical strength. Cellulose nanocrystals (CNCs) are often explored as reinforcing agents to improve the native properties of polymers owing to their superior physicochemical properties. We fabricated a multi-functional hydrogel scaffold of chitosan/CNCs by incorporating different amounts of CNCs into a chitosan (CH) hydrogel. Significant enhancement in the mechanical strength was noted in the CH/CNCs as compared to that in pure CH hydrogel scaffolds. The cytocompatibility of the fabricated scaffolds was monitored in the presence of bone-marrow-derived mesenchymal stem cells (BMSCs). Improved cell viability and mineralization were observed with CH/CNC hydrogel scaffolds than those with pure CH hydrogel scaffolds. Enhanced osteogenic-related gene expression was observed in the CH/CNC hydrogel scaffold environment than that in the control, indicating their osteogenic potential, in addition to enhanced antibacterial activity. Developed composite scaffolds exhibited improved sustained drug release compared to that by pure polymer scaffolds, and this was more sustained in the scaffolds with higher CNC content. Therefore, the fabricated scaffolds may have been used in tissue engineering for osteogenesis, as antibacterial agents, and in sustained drug delivery.

Chitosan: A review of sources and preparation methods.

Chitosan, derived from chitin, has many desirable biomedical attributes. This review aims to explore different sources of chitin and methods of chitosan production with industrial consideration. This article first discussed different sources of chitin for industrial scale production, with considerations given to both their environmental impacts and commercialization potential. Secondly, this article reviews the two categories of chitosan preparation - chemical methods and biological methods - based on existing publications which used lobster by-products as a feedstock source. The mechanisms of the chemical methods are firstly summarized, and then the different chemical agents and reaction parameters used are discussed. Next, both enzymatic and fermentation-based approaches are reviewed under biological methods and compared with chemical methodologies, with lactic fermentation methods as the major focus. This article concludes that lobster cephalothorax could be an ideal source for chitosan preparation on an industrial scale; and chemical methods involve simpler processing overall, while producing chitosan with stronger bioactivities because of the lower molecular weight (MW) and higher degree of deacetylation (DD) achieved by the products. Moreover, due to biological methods inevitably necessitating further chemical processing, an approach involving some unconventional chemical methods has been regarded as a more suitable strategy for industrial scale chitosan production.

Obtaining chitin, chitosan and their melanin complexes from insects.

Interest in insects as a source of valuable biologically active substances has significantly increased over the past few years. Insects serve as an alternative source of chitin, which forms up to 40% of their exoskeleton. Chitosan, a deacetylated derivative of chitin, attracts the attention of scientists due to its unique properties (sorption, antimicrobial, film-forming, wound healing). Furthermore, some insect species are unique and can be used to obtain chitin- and chitosan-melanin complexes in the later stages of ontogenesis. Due to the synergistic effect, chitosan and melanin can enhance each other's biological activity, providing a wide range of potential applications.

Insight into Physicochemical, Rheological, and Antibacterial Properties of Chitosan Extracted from Antarctic krill: A Comparative Study.

In this work, physicochemical, rheological, and antibacterial properties of chitosan (CS) extracted from white shrimp (WS), giant river prawn (GP), and Antarctic krill (AK) were investigated. The results demonstrated that molecular weight (MW) of commercial chitosan (CCS), WSCS, GPCS, and AKCS were 1175.8, 2130.4, 1293.3, and 1109.3 kDa with the degree of deacetylation (DDA) of 73.5, 74.1, 82.1, and 75.9%, respectively. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and scanning electron microscope (SEM) were employed to study the structural differences of CS. Moreover, storage modulus (G') and loss modulus (G″) of AKCS were lower than that of WSCS and GPCS, respectively, but higher than that of CCS. Minimum inhibitory concentration (MIC) and minimum bacterial concentration (MBC) of CS against Escherichia coli and Staphylococcus aureus were investigated at concentration between 0.0125 and 1 mg/mL. These results highlighted that AKCS with low viscoelastic properties had a potential application in food and pharmaceutical application.

Recent development in chitosan-based electrochemical sensors and its sensing application.

During the last few decades, there has been evident growth in the development and fabrication of nano structured materials due to their wide application for different fields of material science and engineering. Among all these materials, natural polymer-based hydrogels such as polysaccharides, proteins, lipids etc. are gaining significant attention in the field of nanotechnology. Among them Chitosan hydrogels are widely used. These are cross-linked hydrophilic polymers which facilitate the uptake of significant quantity of water without being dissolved in water. They are hydrophilic in nature antimicrobial mainly need for fabrication of novel biomaterial These are chemically and physically firm, soft, stretchy polymeric network, reusable and multi-functional in nature. Chitosan has extensive properties including electrical, photo thermal characteristics, catalysis, anti-microbial characteristics, drug degradation, pollutants removal; bio-sensing etc. make it ultimate for "smart" nanostructure material. Recently, advance in the applications of Chitosan has made it an appreciable research material among the researchers. In this review we will focus on properties and applications of Chitosan as smart material in sensor configurations in various fields like clinical and environmental analysis.

Marine collagen peptide grafted carboxymethyl chitosan: Optimization preparation and coagulation evaluation.

Uncontrolled bleeding has always been a sudden accident, which is the main cause of casualties in war trauma, emergency events and surgical operations. Rapid hemostatic materials can effectively reduce casualties and save lives. In this paper, marine collagen peptide grafted carboxymethyl chitosan (CMCS-MCP) was synthesized by 1-ethyl-(dimethylaminopropyl) carbodiimide (EDC)-mediated coupling reaction. To obtain CMCS-MCP conjugates with different degrees of substitution (DS), the reaction conditions were investigated by single-factor tests and optimized by response surface methodology. And the sponges of CMCS-MCP were prepared by freeze-thaw cycling and freeze-drying and characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscope (SEM), and X-ray diffraction (XRD). To evaluate the hemostatic properties of CMCS-MCP sponges, in vitro and in vivo hemostasis tests were carried out. The results showed that the optimum preparation conditions were the mass ratio of MCP to CMCS (MMCP/MCMCS) 6:1, reaction temperature 41 °C, and reaction time 16 h. And under which the DS of 58.86% was obtained. Structure analysis showed that MCP had been successfully grafted onto the CMCS molecular chain, and the CMCS-MCP sponges were of high porosity. In vitro and in vivo hemostasis tests showed that the CMCS-MCP sponges had significant procoagulant activities, especially the one with high DS of 58.86%. The hemostasis mechanism may be that the synergistic effects of MCP and CMCS accelerated coagulation through multiple approaches. The CMCS-MCP sponges give a new insight into biomedical hemostasis materials.

Chitosan: Structural modification, biological activity and application.

Many by-products that are harmful to the environment and human health are generated during food processing. However, these wastes are often potential resources with high-added value. For example, crustacean waste contains large amounts of chitin. Chitin is one of the most abundant polysaccharides in natural macromolecules, and is a typical component of crustaceans, mollusks, insect exoskeleton and fungal cell walls. Chitosan is prepared by deacetylation of chitin and a copolymer of D-glucosamine and N-acetyl-D-glucosamine through ß-(1 â†’ 4)-glycosidic bonds. Chitosan has better solubility, biocompatibility and degradability compared with chitin. This review introduces the preparation, physicochemical properties, chemical and physical modification methods of chitosan, which could help us understand its biological activities and applications. According to the latest reports, the antibacterial activity, antioxidant, immune and antitumor activities of chitosan and its derivatives are summarized. Simultaneously, the various applications of chitosan and its derivatives are reviewed, including food, chemical, textile, medical and health, and functional materials. Finally, some insights into its future potential are provided, including novel modification methods, directional modification according to structure-activity relationship, activity and application development direction, etc.

Chitosan from shrimp residues with a saturated solution of calcium chloride in methanol and water.

Calcium chloride, methanol, and water in stoichiometric amounts were used for the extraction of chitosan from shrimp residues (Farfantepenaeus aztecus). Chitosan was characterized by FT-IR, TGA, XRD, SEM, elemental analysis, and 13C-NMR. The yield of chitosan with medium molecular mass was 65.90% (mass of extracted chitosan/mass of shrimp residues when the extraction was assisted with stirring at 60 °C for 20 min and ultrasound at 60 °C for 30 min. The extracted chitosan had a % DD of 64.06 and 65.87% (13C-NMR and FT-IR, respectively), thermal decomposition stage at 375 °C, porous on its surface, and calcite as the main mineral found. The experimental results revealed that the saturated solution of calcium chloride in methanol and water could be an alternative for the extraction of mineralized chitosan from shrimp residues with thermal stability and porosity.

Properties of chitin and chitosan extracted from silkworm pupae and egg shells.

Chitin and chitosan from silkworm pupae and egg shells show distinct properties with excellent antimicrobial properties and cytocompatiblity. Spent silkworm pupae and hatched egg shells are discarded as waste but contain valuable carbohydrates, proteins and lipids. Chitosan has excellent antimicrobial properties and is widely used for food, medical and biotechnological applications. In this paper, we report the properties of chitin and chitosan from silkworm pupae and egg shells in comparison to commercially available chitosan. Defatted and deproteinated pupae and shells were demineralized and later deacetylated to form chitosan. Thermal behavior, physical structure, antimicrobial activity and ability to support the attachment and growth of NIH3T3 cells were studied. Chitin and chitosan from both pupae and shells had similar structure and composition. Crystallinity of the pupae chitosan was 48% compared to 38% for egg shell chitosan. Silkworm chitosan showed considerably higher antibacterial and antifungal activity compared to standard. Cells were viable in the presence of pupae and egg shell chitosan in all the concentrations tested. Based on these observations, it can be inferred that silkworm pupae and shells provide a renewable and sustainable source for chitosan with properties suitable for food and medical applications.

Investigation on Mecynorhina torquata Drury, 1782 (Coleoptera, Cetoniidae, Goliathini) cuticle: Surface properties, chitin and chitosan extraction.

Naturally derived polymers, such as cellulose or chitin, are materials with increasing interest for a sustainable future. Considering the pollution associated with plastics recycling, natural and fully biocompatible materials like cellulose and chitin are becoming increasingly more relevant for sustainable engineering applications. Chitin and highly deacetylated chitin (chitosan) are already implemented in a wide range of materials applications, especially in biomedical fields. One interesting aspect of chitin is that the majority of industrially produced chitin is extracted from shrimp exoskeleton. However, other arthropods can also be investigated as a source of chitin. In this work, we focus on the extraction of chitin and preparation of chitosan from a beetle specie: Mecynorhina torquata. This includes characterization of the native Mecynorhina torquata surfaces and all intermediate surfaces throughout the chitosan extraction procedure. The final product, prepared chitosan, is also characterized using IR, SEM, ash content, and deacetylation degree. In addition, spectacular iridescent surfaces of Mecynorhina torquata are highlighted at the intermediate steps during chitin extraction. Finally, as proof of concept, the isolated chitosan is used to form hydrogel.

The Potential of Insects as Alternative Sources of Chitin: An Overview on the Chemical Method of Extraction from Various Sources.

Chitin, being the second most abundant biopolymer after cellulose, has been gaining popularity since its initial discovery by Braconot in 1811. However, fundamental knowledge and literature on chitin and its derivatives from insects are difficult to obtain. The most common and sought-after sources of chitin are shellfish (especially crustaceans) and other aquatic invertebrates. The amount of shellfish available is obviously restricted by the amount of food waste that is allowed; hence, it is a limited resource. Therefore, insects are the best choices since, out of 1.3 million species in the world, 900,000 are insects, making them the most abundant species in the world. In this review, a total of 82 samples from shellfish-crustaceans and mollusks (n = 46), insects (n = 23), and others (n = 13)-have been collected and studied for their chemical extraction of chitin and its derivatives. The aim of this paper is to review the extraction method of chitin and chitosan for a comparison of the optimal demineralization and deproteinization processes, with a consideration of insects as alternative sources of chitin. The methods employed in this review are based on comprehensive bibliographic research. Based on previous data, the chitin and chitosan contents of insects in past studies favorably compare and compete with those of commercial chitin and chitosan-for example, 45% in Bombyx eri, 36.6% in Periostracum cicadae (cicada sloughs), and 26.2% in Chyrysomya megacephala. Therefore, according to the data reported by previous researchers, demonstrating comparable yield values to those of crustacean chitin and the great interest in insects as alternative sources, efforts towards comprehensive knowledge in this field are relevant.