Phytochemical Analysis, Antioxidant Potential and Antibacterial Activities of Different Anatomical Parts of Hypericum cordifolium Choisy.

The genus Hypericum comprises a large number of species. The flower, leaf, stem, and root of the Hypericum species are widely used in traditional medicine in different cultures. Many Hypericum species have been well investigated phytochemically and pharmacologically. However, only a few reports are available on the H. cordifolium native to Nepal. The present study aims to evaluate the phytochemical composition of different extracts, qualitative analysis of methanol extract of the flower and leaf using thin-layer chromatography (TLC), and the antioxidant properties of components by the TLC-DPPH. assay. The phenolic and flavonoid contents were estimated in different extracts of the leaf and stem, and their antioxidant and antibacterial activities were evaluated. In the phytochemical screening, phenolics and flavonoids were present in ethyl acetate, methanol, and 50% aq methanol extracts of both the leaf and stem. In TLC analysis, the methanol extract of flowers showed the presence of 11 compounds and the leaf extract showed the presence of 8 compounds. Both extracts contained chlorogenic acid and mangiferin. Hyperoside and quercetin were present only in the flower extract. In the TLC-DPPH. assay, almost all of the flower extracts and 5 compounds of the leaf extract showed radical scavenging potential. Estimation of phenolics and flavonoids showed that all the leaf extracts showed higher amounts of phenolics and flavonoids than stem extracts. Among leaf extracts, greater amounts of phenolics were detected in 50% aqueous methanol extract (261.25 ± 1.66 GAE/g extract) and greater amounts of flavonoids were detected in methanol extract (232.60 ± 10.52 CE/g extract). Among stem extracts, greater amounts of flavonoids were detected in the methanol extract (155.12 ± 4.30 CE/g extract). In the DPPH radical scavenging assay, the methanol extract of the leaf showed IC50 60.85 ± 2.67 µg/ml and 50% aq. methanol extract of the leaf showed IC50 63.09 ± 2.98 µg/ml. The methanol extract of the stem showed IC50 89.39 ± 3.23 µg/ml, whereas ethyl acetate and 50% aq. methanol extract showed IC50 > 100 µg/ml. In the antibacterial assay, the methanol extract of the leaf showed the inhibition zone of 12-13 mm and the stem extract showed the inhibition zone of 7-11 mm against S. aureus, E. coli, and S. sonnei, whereas both extracts were inactive against S. typhi. The findings of this study support the traditional use of this plant in Nepal for the treatment of diseases associated with bacterial infections. The present study revealed that the underutilized anatomical parts of H. cordifolium could be the source of various bioactive phytochemicals like other Hypericum species.

Development and validation of a high-performance thin-layer chromatography method for detection of sibutramine in dietary supplements.

INTRODUCTION: In the period between 1997 and 2010, sibutramine-containing drugs were widely prescribed for obesity and over-weight management. Due to safety concerns, in 2010 all medicines containing sibutramine were urgently withdrawn from the USA and European pharmaceutical market. Although sibutramine is no longer available in pharmaceutical products, there have been numerous reports of mislabeled weight-loss dietary supplements containing sibutramine.

Optimization of ultrasonic pretreatment and analysis of chlorogenic acid in potato leaves.

Chlorogenic acid (CA) is an effective ingredient that can strengthen immunity during following the COVID-19 era. The current cost of CA is high owing to its complex purification process and low yield (approximately 2%). In this study, a one-step path orthogonal experiment was designed based on the results from Gauss calculation, which consisted of acidity, coordination, and hydrolysis in molecules. The optimized extraction conditions were 60 â„ƒ, 60 min, 1:20 liquid ratio, and 40% ethanol in a nitrogen atmosphere controlled using a device of our own design, which led to CA yields of up to 6.35% from potato leaves. The purified CA was analyzed using high-performance liquid chromatography, thin-layer chromatography, ultraviolet-visible spectroscopy, and molecular fluorescence. This accurate and reproducible method can not only be used to obtain high yields of CA but can also be used for the quality control of active plant products and their isomers.

Magnetic field assisted centrifugal acceleration thin-layer chromatography: An approach to investigate the magnetic field effects on separation parameters including retention factor difference, selectivity factor, and resolution.

The effect of internal and external magnetic fields on the separation of antifungal drugs by centrifugal acceleration thin-layer chromatography was reported for the first time. External and internal magnetic fields were applied using neodymium magnets and CoFe2O4@SiO2 ferromagnetic nanoparticles. Separation of ketoconazole and clotrimazole was performed using a mobile phase consisting of n-hexane, ethyl acetate, ethanol, and ammonia (2.0:2.0:0.5:0.2, v/v). The influence of the magnetic field on the entire chromatographic system led to changes in the properties of the stationary and mobile phases and the analytes affecting the retention factor, shape, and width of the separated rings. The extent of this impact depended on the structure of the analyte and the type and intensity of the magnetic field. In the presence of the external magnetic field, there were more significant changes in the chromatographic parameters of the drugs, especially the width of the separated rings, and ketoconazole was more affected than clotrimazole. The changes are conceivably due to the effect of the magnetic field on the analyte distribution between the stationary and mobile phases, which is also caused by the possibility of the magnetic field affecting the viscosity, surface tension, and surface free energy between the stationary and mobile phases.

Quantitative detection of microcystin-LR in Bellamya aeruginosa by thin-layer chromatography coupled with surface-enhanced Raman spectroscopy based on in-situ ZIF-67/Ag NPs/Au NWs composite substrate.

As a hypertoxic natural toxin, the risk of Microcystin-leucine-arginine (MC-LR) residues in Bellamya aeruginosa deserves more attention. Herein, employing the conventional thin-layer chromatography (TLC) technology and a novel surface-enhanced Raman scattering (SERS) substrate, a TLC-SERS chip was fabricated for the purification and quantitative detection of MC-LR in complex samples. The substrate exhibited excellent SERS performance with an enhancement factor of 6.6 × 107, a low detection limit of 2.27 × 10-9 mM for MC-LR, excellent uniformity and reproducibility, as well as a wide linear range. With the application of TLC, the MC-LR was efficiently purified and the concentration was increased to >3 times. Ultimately, recovery rates fluctuated between 93.28% and 101.66% were obtained from the TLC-SERS chip. On balance, the TLC-SERS chip has a robust capacity for achieving rapid and stable quantitative detection of MC-LR, which promises to improve the efficiency of food safety monitoring.

An eco-friendly and cost-effective HPTLC method for quantification of COVID-19 antiviral drug and co-administered medications in spiked human plasma.

The coronavirus-2 has led to a global pandemic of COVID-19 with an outbreak of severe acute respiratory syndrome leading to worldwide quarantine measures and a rise in death rates. The objective of this study is to propose a green, sensitive, and selective densitometric method to simultaneously quantify remdesivir (REM) in the presence of the co-administered drug linezolid (LNZ) and rivaroxaban (RIV) in spiked human plasma. TLC silica gel aluminum plates 60 F254 were used as the stationary phase, and the mobile phase was composed of dichloromethane (DCM): acetone (8.5:1.5, v/v) with densitometric detection at 254 nm. Well-resolved peaks have been observed with retardation factors (Rf) of 0.23, 0.53, and 0.72 for REM, LNZ, and RIV, respectively. A validation study was conducted according to ICH Q2 (R1) Guidelines. The method was rectilinear over the concentration ranges of 0.2-5.5 µg/band, 0.2-4.5 µg/band and 0.1-3.0 µg/band for REM, LNZ and RIV, respectively. The sensitivities of REM, LIN, and RIV were outstanding, with quantitation limits of 128.8, 50.5, and 55.8 ng/band, respectively. The approach has shown outstanding recoveries ranging from 98.3 to 101.2% when applied to pharmaceutical formulations and spiked human plasma. The method's greenness was assessed using Analytical Eco-scale, GAPI, and AGREE metrics.

Evaluation of the Lipophilicity of Angularly Condensed Diquino- and Quinonaphthothiazines as Potential Candidates for New Drugs.

Lipophilicity is one of the most important properties of compounds required to estimate the absorption, distribution, and transport in biological systems, in addition to solubility, stability, and acid-base nature. It is crucial in predicting the ADME profile of bioactive compounds. The study assessed the usefulness of computational and chromatographic methods (thin-layer chromatography in a reversed-phase system, RP-TLC) for estimating the lipophilicity of 21 newly synthesized compounds belonging to diquinothiazines and quinonaphthiazines. In order to obtain reliable values of the relative lipophilicities of diquinothiazines and quinonaphthiazines, the partition coefficients obtained using different algorithms such as AlogPs, AClogP, AlogP, MLOGP, XLOGP2, XLOGP3, logP, and ClogP were compared with the chromatographic RM0 values of all the tested compounds measured by the experimental RP-TLC method (logPTLC). Additionally, logPTLC values were also correlated with other descriptors, as well as the predicted ADME and drug safety profiling parameters. The linear correlations of logPTLC values of the tested compounds with other calculated molecular descriptors such as molar refractivity, as well as ADME parameters (Caco-2 substrates, P-gp inhibitors, CYP2C19, and CYP3A4) generally show poor predictive power. Therefore, in silico ADME profiling can only be helpful at the initial step of designing these new candidates for drugs. The compliance of all discussed diquinothiazines and naphthoquinothiazines with the rules of Lipinski, Veber, and Egan suggests that the tested pentacyclic phenothiazine analogs have a chance to become therapeutic drugs, especially orally active drugs.

[Establishment and Optimization of Quality Standards for the Traditional Tibetan Medicine Preparation of Liuwei Nengxiao Pills]. / è—è¯å ­å‘³èƒ½æ¶ˆä¸¸è´¨é‡æ ‡å‡†çš„å»ºç«‹ä¸Žä¼˜åŒ–.

Objective: To establish quality standards for Liuwei Nengxiao pills, to optimize the quality control method, and to provide references for the quality control of Liuwei Nengxiao pills. Methods: Chebula, dried ginger, and Tibetan liqueur root in Liuwei Nengxiao pills of different batch numbers were analyzed by thin layer chromatography (TLC). Then, the content of chrysophanol in the preparation was determined by high performance liquid chromatography (HPLC). Furthermore, a series of methodological validation, including the investigation of the linear relationship, precision, stability, and reproducibility and sample recovery test, were performed to verify the reliability of the results. Results: The TLC identification method was easy to perform and demonstrated high specificity, clear spots, and good separation effect. In addition, the negative controls showed no interference. The HPLC method showed high accuracy. The results of methodological validation showed that the peak area of chrysophanol had a good linear relationship (r2=1.0) in the range of 0.06-0.80 µg, presenting good precision (with the relative standard deviation being lower than 2.0%), good stability and reproducibility (with the relative standard deviation being lower than 1.0%), and an average recovery rate of 100.8%. Conclusion: TLC and HPLC are easy to perform, showing high accuracy and reproducibility. The quality standards established are scientific, reasonable, stable, and feasible, providing references for the quality control of Liuwei Nengxiao pills.

Identification and quantification of pigments in plant leaves using thin layer chromatography-Raman spectroscopy (TLC-Raman).

Carotenoids are yellow, orange, and red pigments commonly found in plants. In leaves, these molecules are essential for photosynthesis, but they also play a major role in plant growth and development. Efficiently monitoring concentrations of specific carotenoids in plant tissues could help to explain plant responses to environmental stressors, infection and disease, fertilization, and other conditions. Previously, Raman methods have been used to demonstrate a correlation between plant fitness and the carotenoid content of leaves. Due to solvatochromatic effects and structural similarities within the carotenoid family, current Raman spectroscopy techniques struggle to assign signals to specific carotenoids with certainty, complicating the determination of amounts of individual carotenoids present in a sample. In this work, we use thin layer chromatography-Raman spectroscopy, or TLC-Raman, to identify and quantify carotenoids extracted from tomato leaves. These quick and accurate methods could be applied to study the relationship between pigment content and a number of factors affecting plant health.

Evaluation of Lipids for the Study of Photosynthetic Membranes.

The biological role of lipids goes far beyond the formation of a structural membrane bilayer platform for membrane proteins and controlling fluxes across the membranes. For example, in photosynthetic thylakoid membranes, lipids occupy well-defined binding niches within protein complexes and determine the structural organization of membrane proteins and their function by controlling generic physicochemical membrane properties. In this chapter, two-dimensional thin-layer chromatography (2D TLC) and gas chromatography (GC) techniques are presented for quantitative analysis of lipid classes and fatty acids in thylakoid membranes. In addition, lipid extraction methods from isolated thylakoid membranes and leaves are described together with a procedure for the derivatization of fatty acids to fatty acid methyl esters (FAME) that is required for GC analysis.

Chiral Thianthrenes.

The absolute configuration and stability of two thianthrene chiral sulfoxides has been determined by means of X-ray single-crystal structure determinations. The analyses and configurations allow verification that the diastereomeric sulfoxides are stable in solution and are not interconverting, which has been suggested in some studies of sulfoxides. The two thianthrene sulfoxides have slightly different Rf values, which allowed their separation using flash chromatography on silica. The spots run back-to-back, which posed a challenge for their separation. The pure, separated compounds in solution remain as separate, single spots on a Thin Layer Chromatography (TLC) plate.

High-Performance Thin-Layer Chromatography Coupled with Single Quadrupole: Application the Identification and Differentiation of Rehmanniae Radix and Its Different Processing Products from Raw Materials to Commercial Products.

The authentication of ingredients in formulas is crucial yet challenging, particularly for constituents with comparable compositions but vastly divergent efficacy. Rehmanniae Radix and its derivatives are extensively utilized in food supplements, which contain analogous compositions but very distinct effects. Rehmanniae Radix, also a difficult-to-detect herbal ingredient, was chosen as a case to explore a novel HPTLC-QDa MS technique for the identification of herbal ingredients in commercial products. Through systematic condition optimization, including thin layer and mass spectrometry, a stable and reproducible HPTLC-QDa MS method was established, which can simultaneously detect oligosaccharides and iridoids. Rehmannia Radix and its processed products were then analyzed to screen five markers that could distinguish between raw and prepared Rehmannia Radix. An HPTLC-QDa-SIM method was further established for formula detection by using the five markers and validated using homemade prescriptions and negative controls. Finally, this method was applied to detect raw and prepared Rehmannia Radix in 12 commercial functional products and supplements.

Microscopy, HPTLC, and LC-DAD-Q-ToF validation of nut-based weight-loss dietary supplements, Aleurites moluccanus (candlenut) and Bertholletia excelsa (Brazil nut).

Aleurites moluccanus (candlenut) and Bertholletia excelsa (Brazil nut) are marketed as dietary supplements for weight loss. These dietary supplements have been found to sometimes be adulterated with toxic nuts/seeds from Cascabela thevetia, commonly known as yellow oleander or lucky nut. This study emphasizes the key identification parameters to differentiate the genuine and adulterated nuts. Samples were obtained from authenticated sources of the nuts and from commercial sources of dietary supplements. This study examined 38 samples, including voucher and commercial samples. All eight commercial candlenut dietary supplement samples were adulterated. Additionally, two samples sold as Brazil nuts were also found to be adulterated. Other nuts were screened for the presence of Cardiac Glycosides, but none were found to be positive. The presence of yellow oleander was confirmed in all commercial dietary supplement samples marketed as candlenut as well as in commercial samples of Brazil nut. This study provides simple key identification characters using micro-morphology and histochemical localization of cardiac glycosides in the commercial nuts, HPTLC fingerprints, and LC-DAD-Q-ToF analytical parameters to detect and identify adulteration in commercial products.

Screening of α-amylase/trypsin inhibitor activity in wheat, spelt and einkorn by high-performance thin-layer chromatography.

α-Amylase/trypsin inhibitor proteins (ATI) are discussed as possible triggers for non-celiac gluten sensitivity. The potential of high-performance thin-layer chromatography (HPTLC) was studied for the first time to analyse the inhibitory properties of ATIs from flour of wheat, spelt, and einkorn. Inhibition by each flour of the digestive enzymes trypsin or α-amylase was determined by the reduction of released metabolisation products in comparison to non-digested flour, and positive (acarbose) and negative (water) controls. Firstly, amylolysis was carried out in miniaturized form on the HPTLC surface (HPTLC-nanoGIT) after in-vial pre-incubation of the amylase with the inhibitors from flour. α-Amylase inhibition was evident via the reduction of released saccharides, as analysed by normal phase HPTLC. A strong influence of the flour matrix on the assay results (individual saccharides) was evident, caused by an increased amylolysis of further polysaccharides present, making HPTLC analysis more reliable than currently used spectrophotometric sum value assays. The detection and visualization of such matrix influence helps to understand the problems associated with spectrophotometric assays. Only maltotriose was identified as a reliable marker of the amylolysis. The highest α-amylase inhibition and thus the lowest saccharide response was detected for maltotriose in refined spelt, whereas the lowest α-amylase inhibition and thus the highest saccharide response was detected for maltotriose in refined wheat. A comparison of refined and whole grain flours showed no clear trend in the responses. Secondly, trypsin inhibition and proteolysis were performed in-vial, and any inhibition was evident via the reduction of released peptides, analysed by reversed-phase HPTLC. Based on the product pattern of the proteolysis, einkorn and whole wheat showed the highest trypsin inhibition, whereas refined wheat and refined spelt showed the lowest inhibition. Advantageously, HPTLC analysis provided important information on changes in individual saccharides or peptides, which was more reliable and sustainable than spectrophotometric in-vial assays (only sum value) or liquid column chromatography analysis (targeting only the ATI proteins).

Characterization of Secondary Metabolites of Leaf Buds from Some Species and Hybrids of Populus by Gas Chromatography Coupled with Mass Detection and Two-Dimensional High-Performance Thin-Layer Chromatography Methods with Assessment of Their Antioxidant Activity.

Poplars provide medicinal raw plant materials used in pharmacy. Leaf buds are one of the herbal medicinal products collected from poplars, having anti-inflammatory and antiseptic properties, but there are no quality standards for their production and there is a need to determine their botanical sources. Therefore, the chemical compositions of the leaf buds from four species and varieties of poplars, Populus balsamifera, P. × berolinensis, P. × canadensis 'Marilandica', and P. wilsonii were investigated and compared using gas chromatography coupled with mass detection (GC-MS) and two-dimensional high-performance thin-layer chromatography (2D-HPTLC) in order to search for taxa characterized by a high content of biologically active compounds and with a diverse chemical composition that determines their therapeutic effects. The presence of 163 compounds belonging to the groups of flavonoids, phenolic acids derivatives, glycerides, and sesquiterpenes was revealed. Moreover, the conditions for the separation and identification of biologically active compounds occurring in analyzed leaf buds using 2D-HPTLC were optimized and used for metabolomic profiling of the studied poplars, enabling their fast and simple botanical identification. The total phenolic (TPC) and flavonoid (TFC) contents of examined extracts were determined and their antioxidant capacities were estimated by spectrophotometric DPPH, ABTS, and FRAP assays. Based on the analysis of phytochemicals and antioxidant activity, P. × berolinensis buds were selected as the raw plant material for medicinal purposes with the highest content of active compounds and the strongest antioxidant activity.

Increasing Analytical Quality by Designing a Thin-Layer Chromatography Scanner Method for the Determination of the Radiochemical Purity of Radiopharmaceutical Sodium Iodide 131I Oral Solution.

The goal of this study was to apply the principles of analytical quality by design (AQbD) to the analytical method for determining the radiochemical purity (PQR) of the radiopharmaceutical sodium iodide 131I oral solution, utilizing thin-layer chromatography (TLC) with a radio-TLC scanner, which also enables the evaluation of product quality. For AQbD, the analytical target profile (ATP), critical quality attributes (CQA), risk management, and the method operable design region (MODR) were defined through response surface methodology to optimize the method using MINITAB® 19 software. This study encompassed the establishment of a control strategy and the validation of the method, including the assessment of selectivity, linearity, precision, robustness, detection limit, quantification limit, range, and the stability of the sample solution. Under the experimental conditions, the method parameters of the TLC scanner were experimentally demonstrated and optimized with an injection volume of 3 µL, a radioactive concentration of 10 mCi/mL, and a carrier volume of 40 µL. Statistical analysis confirmed the method's selectivity for the 131I iodide band Rf of 0.8, a radiochemical impurity IO3- Rf of 0.6, a linearity from 6.0 to 22.0 mCi/mL, and an intermediate precision with a global relative standard deviation (RSD) of 0.624%. The method also exhibited robustness, with a global RSD of 0.101%, a detection limit of 0.09 mCi/mL, and a quantification limit of 0.53 Ci/mL, meeting the prescribed range and displaying stability over time (at 0, 2, and 20 h) with a global RSD of 0.362%, resulting in consistent outcomes. The development of a method based on AQbD facilitated the creation of a design space and an operational space, with comprehensive knowledge of the method's characteristics and limitations. Additionally, throughout all operations, compliance with the acceptance criteria was verified. The method's validity was confirmed under the established conditions, making it suitable for use in the manufacturing process of sodium iodide 131I and application in nuclear medicine services.

Screening method for the analysis of Rhodamine B in chili powder.

Rhodamine B is a synthetic dye known to enhance the visual appearance of chili powder. Due to its toxicity and carcinogenicity, chromatographic methods have been developed to monitor its presence in adulterated chili powder, but their assays are laborious, time consuming and expensive for screening purposes. The present studies propose an alternative for screening Rhodamine B in chili powder samples. The method combines thin layer chromatography (TLC) to solid surface room-temperature fluorescence spectroscopy. The scrape-dissolution procedure common to the instrumental analysis of TLC procedures was replaced with a fiber optic probe coupled to a commercial spectrofluorometer. The determination of Rhodamine B on the chromatographic plate is based on its retardation factor and maximum excitation and emission wavelengths. The limit of detection (1.9 ng.mL-1) and the limit of quantitation (5.2 ng.mL-1) are well below the usual contamination of Rhodamine B in adulterated foods.

Colorimetric analysis platform based on thin layer chromatography for monitoring gluten cross-contamination in food industry.

Monitoring of the accidental presence of gluten (Glu), resulting from cross-contamination, is imperative in different industries, in particular food industry. The objective of this study was the development of an analytical platform utilizing thin-layer chromatography (TLC) with colorimetric read-out for making binary (yes/no) decisions on surfaces and/or point of these industries. The composition of the extractive phase was optimized with commercial products used in cleaning processing lines. Subsequently, an exploration of TLC separation and detection was undertaken. CN-modified nanosilica plates and 30:70 acetonitrile:water were used to achieve a selective signal for Glu residues. The study of the detection performance showed that both spectroscopic measurement and image analysis were resulted in satisfactory results for quantitate analysis (RSD = 5 %, LOD = 0.12 mg). The practical application of the proposed methodology on surfaces of the food processing lines. This work demonstrated the operational feasibility in detecting gluten cross-contaminations within the food processing industry.

Salty treatment increased bioactive compounds accumulation during agarwood development in Aquilaria sinensis trees.

To compare the bioactive compounds in agarwood induced by different methods in Aquilaria sinensis(Lour.) Gilg trees, a two dimensional thin layer chromatograph(2D-TLC) combined with effect directive analysis(EDA) was developed. Three antioxidants were found by 2D-TLC-DPPH and further identified as 2-(2-phenylethyl) chromones(PECs) with LC-MS/MS. The 3 antioxidants decreased along agarwood formation and their compositions in drilling induced agarwood differed with those in microbe culture induced agarwood. Further study showed NaCl treatment promoted antioxidants accumulation in agarwood induced by drilling or hot drilling. Hot drilling combined with salty stimulation was most efficient in some chemicals accumulation, which were identified as PECs with antioxidant, tyrosinase or ß-glucosidase inhibiting activities by 2D-TLC-EDA-LC-MS/MS. This study provided a 2D-TLC-EDA-LC-MS/MS method for bioactive compounds screen and qualification of agarwood. Based on this method, non-conventional methods were found to accelerate the accumulation of some bioactive PECs in A. sinensis trees.

Determination of Physicochemical Characteristics, Phytochemical Profile and Antioxidant Activity of Various Clover Honeys.

This paper reports on some physicochemical and phytochemical characteristics (i. e. pH, electrical conductivity, colour, moisture content, total phenolic content, sugar profile) and in vitro antioxidant activity of honeys harvested from five legume species, red clover (Trifolium pratense), balansa clover (T. michelianum), Persian clover (T. resupinatum), purple clover (T. purpureum) and sanfoin, also known as holy clover (Onobrychis viciifolia), that were grown in enclosed shade houses to ensure that the honeys' characteristics are reflective of a truly monofloral honey. Glucose and fructose, determined via High-Performance Thin-Layer Chromatography (HPTLC) analysis, were found as the main sugars in all investigated honeys with the ratio of fructose to glucose ranging from 1 : 1.2 to 1 : 1.6. The honeys' pH values ranged from 3.9 to 4.6 which met Codes Alimentarius (CA) requirements. The moisture content was found to be between 17.6 and 22.2 % which in some cases was slightly higher than CA requirements (≤20 %). The honeys' colour values, prior and after filtration, were between 825.5-1149.5 mAU and 532.4-824.8 mAU respectively, illustrating golden yellow to deep yellow hues. The total phenolic content (TPC) of the honeys was determined using a modified Folin-Ciocalteu assay. Their antioxidant activity was captured by the Ferric Reducing-Antioxidant Power (FRAP) assay as well as HPTLC analysis coupled with 2,2-diphenyl-1-picrylhydrazyl (DPPH) derivatisation. The highest total phenolic content was found in red clover honey (45.4 mg GAE/100 g) whereas purple clover honey showed the highest level of activity in the FRAP assay (7.3 mmol Fe2+/kg). HPTLC-DPPH analysis of the honeys' organic extracts demonstrated the presence of various bioactive compounds that contribute to their overall antioxidant activity. This study developed a methodology for producing monofloral clover honeys in a space limited, enclosed production system, which allowed to collate important baseline data for these honeys that can serve as the foundation for their potential future development into commercial honeys, including honeys that can be used for medicinal purposes.