Chitosan-coated paper packaging for specialty coffee beans: Coating characterization, bean and beverage analysis.

Cellulose-based packaging has received great attention due to its characteristics of biodegradability, sustainability, and recyclability. Natural polymer coatings are usually applied to the paper surface to enhance the barriers to water vapour and improve the mechanical properties. A chitosan-based coating for paper packaging was developed in this work to store specialty roasted coffee beans, evaluating two samples of chitosan (Sigma® and molasses chitosan), and following the physico-chemical and microbiological characteristics of coffee beans along a period of 60 days. Sensory tests (Ranking Descriptive Analysis and Preference Test) were applied to the beverage prepared with the roasted and ground coffee beans stored in each packaging. Thin chitosan films provided good coverage and adhesion on the paper. Improved mechanical properties and lower water permeability were observed in the chitosan-coated papers. The physicochemical and microbiological characteristics of the coffee beans were not influenced by the packaging along 60 days of storage. The molasses chitosan coating resulted in slightly darker roasted beans. In sensory evaluation, there is a clear difference between the chitosan samples, so that molasses chitosan-coated packaging had higher scores compared to Sigma® chitosan treatment for flavor and global impression in the preference analysis of the beverage. The molasses chitosan-coated packaging had three to four more consumers attributing the highest scores for the beverage prepared with the roasted beans stored in this type of packaging.

Quality of Arabica coffee grown in Brazilian Savannah and impact of potassium sources.

Located in Brazil's Central Plateau, the Cerrado Savannah is an emerging coffee-growing region with significant potential for the national coffee market. This study investigated the impact of potassium fertilization on Arabica coffee quality in the Cerrado, using three potassium sources (K2SO4, KCl, and KNO3) and five cultivars (Arara, Aranãs, IPR103, Catiguá and Topázio) across two consecutive harvests. We focused on productivity, granulometry, chemical composition, and sensory characteristics. No significant difference in productivity across the cultivars studied or potassium sources as isolated factors were observed. Regarding chemical parameters, potassium sources only affected NO3- and SO42- levels in the grains. Cultivar-specific differences were noted in caffeine (CAF), citric acid (CA), and sucrose (SUC), highlighting a strong genetic influence. K2SO4 improved productivity in Arara (15 %) and IPR103 (11 %), while KNO3 reduced flat grain percentage to 70 % in Catiguá. Sensory evaluation showed that all potassium sources and cultivars produced specialty coffees, with the Arara cultivar treated with K2SO4 achieving the highest SCA score (83.3) while IPR 103 treated with KCl scored the lowest at 78. Only three treatments were below but very close to the threshold (80). Multivariate analysis indicated a trend where specific treatments correlated with higher productivity and quality. Despite the subtle differences in productivity and quality among potassium sources, a cost-benefit analysis may favor KCl due to its affordability, suggesting its viability as a potassium fertilization option in coffee cultivation. Future research is needed to confirm these trends and optimize potassium source selection to enhance coffee quality in the Cerrado.

Chemical composition and sensory profiling of coffees treated with asparaginase to decrease acrylamide formation during roasting.

Acrylamide is an amide formed in the Maillard reaction, with asparagine as the primary amino acid precursor. The intake of large amounts of acrylamide has induced genotoxic and carcinogenic effects in hormone-sensitive tissues of animals. The enzime asparaginase is one of the most effective methods for lowering the formation of acrylamide in foods such as potatoes. However, the reported sensory outcomes for coffee have been unsatisfactory so far. This study aimed to produce coffees with reduced levels of acrylamide by treating them with asparaginase while retaining their original sensory and bioactive profiles. Three raw samples of Coffea arabica, including two specialty coffees, and one of Coffea canephora were treated with 1000, 2000, and 3000 ASNU of the enzyme. Asparagine and bioactive compounds (chlorogenic acids-CGA, caffeine, and trigonelline) were quantified in raw and roasted beans by HPLC and LC-MS, while the determination of acrylamide and volatile organic compounds was performed in roasted beans by CG-MS. Soluble solids, titratable acidity, and pH were also determined. Professional cupping by Q-graders and consumer sensory tests were also conducted. Results were analyzed by ANOVA-Fisher, MFA, PCA and Cluster analyses, with significance levels set at p ≤ 0.05. Steam treatment alone decreased acrylamide content by 18.4%, on average, and 6.1% in medium roasted arabica and canefora coffees. Average reductions of 32.5-56.0% in acrylamide formation were observed in medium roasted arabica beans when 1000-3000 ASNU were applied. In the canefora sample, 59.4-60.7% reductions were observed. However, steam treatment primarily caused 17.1-26.7% reduction of total CGA and lactones in medium roasted arabica samples and 13.9-22.0% in canefora sample, while changes in trigonelline, caffeine, and other evaluated chemical parameters, including the volatile profiles were minimal. Increasing enzyme loads slightly elevated acidity. The only sensory changes observed by Q-graders and or consumers in treated samples were a modest increase in acidity when 3000 ASNU was used in the sample with lower acidity, loss of mild off-notes in control samples, and increased perception of sensory descriptors. The former was selected given the similarity in chemical outcomes among beans treated with 2000 and 3000 ASNU loads.

Effects of geographical origin and post-harvesting processing on the bioactive compounds and sensory quality of Brazilian specialty coffee beans.

Specialty coffee beans are those produced, processed, and characterized following the highest quality standards, toward delivering a superior final product. Environmental, climatic, genetic, and processing factors greatly influence the green beans' chemical profile, which reflects on the quality and pricing. The present study focuses on the assessment of eight major health-beneficial bioactive compounds in green coffee beans aiming to underscore the influence of the geographical origin and post-harvesting processing on the quality of the final beverage. For that, we examined the non-volatile chemical profile of specialty Coffea arabica beans from Minas Gerais state, Brazil. It included samples from Cerrado (Savannah), and Matas de Minas and Sul de Minas (Atlantic Forest) regions, produced by two post-harvesting processing practices. Trigonelline, theobromine, theophylline, chlorogenic acid derivatives, caffeine, caffeic acid, ferulic acid, and p-coumaric acid were quantified in the green beans by high-performance liquid chromatography with diode array detection. Additionally, all samples were roasted and subjected to sensory analysis for coffee grading. Principal component analysis suggested that Cerrado samples tended to set apart from the other geographical locations. Those samples also exhibited higher levels of trigonelline as confirmed by two-way ANOVA analysis. Samples subjected to de-pulping processing showed improved chemical composition and sensory score. Those pulped coffees displayed 5.8% more chlorogenic acid derivatives, with an enhancement of 1.5% in the sensory score compared to unprocessed counterparts. Multivariate logistic regression analysis pointed out altitude, ferulic acid, p-coumaric acid, sweetness, and acidity as predictors distinguishing specialty coffee beans obtained by the two post-harvest processing. These findings demonstrate the influence of regional growth conditions and post-harvest treatments on the chemical and sensory quality of coffee. In summary, the present study underscores the value of integrating target metabolite analysis with statistical tools to augment the characterization of specialty coffee beans, offering novel insights for quality assessment with a focus on their bioactive compounds.

From cup to clock: exploring coffee's role in slowing down biological aging.

Background: Previous research has proposed that coffee consumption may have potential health benefits, yet the effect of coffee on one's biological age has not been determined to date. The purpose of this study is to investigate the influence of coffee drinking on biological aging. Methods: Participants were chosen from the National Health and Nutrition Examination Survey (NHANES) and had to meet the selection criteria. Coffee consumption was evaluated through two 24-hour dietary questionnaires. Biological age was measured using both the PhenoAge and KDM-BA algorithms. Multiple linear and logistic regression models were adopted to analyze the association of coffee consumption with biological aging. Results: A total of 13 384 participants with an average daily coffee consumption of 1.73 cups were included. Participants with higher coffee consumption tended to be older, male, non-Hispanic white; had a higher educational level beyond high school; were more likely to be married; had better financial status; and were less likely to smoke or engage in excessive drinking. These individuals with higher coffee consumption exhibited a younger biological age in relation to their chronological age, as indicated by lower mean advancements in PhenoAge and KDM-BA scores. Furthermore, coffee intake was found to be inversely related to PhenoAge and KDM-BA progressions, as well as to the chances of accelerated biological aging, both in unadjusted and adjusted models. These associations remained consistent across all age and gender groups. Additionally, some heterogeneity was also observed among body mass index and physical activity categories. Conclusions: Coffee drinking was inversely related to biological age advancements and the likelihood of accelerated biological aging. Moderate coffee consumption may offer substantial benefits in reducing biological aging.

Online consumer testing beyond central location tests: A case study for brewed coffee.

Due to the constraints of the COVID-19 pandemic, conducting sensory evaluations requiring direct interactions became challenging. In response, researchers have been motivated to devise non-face-to-face testing methods as alternatives. This study aimed to compare two non-face-to-face home-use tests (HUT) with the traditional face-to-face central location test (CLT). Both HUTs involved online recruitment and sample delivery to participants' homes. One HUT provided a written protocol with no direct interaction (contactless HUT; C-HUT), whereas the other included an online meeting with a researcher for live guidance (online HUT; O-HUT). Four coffee samples were evaluated on the basis of liking and sensory and emotional attributes. The comparison between CLT and O-HUT showed RV coefficients of 0.92, 0.93, and 0.98 (P < 0.05) for liking and sensory and emotional attributes, respectively. In addition, based on the RV coefficient, the CLT results showed a significantly greater similarity to those of O-HUT compared to those of C-HUT. The O-HUT also outperformed the C-HUT in its ability to significantly discriminate between samples. Hence, real-time interactions between researchers and participants, as facilitated by O-HUT, may be more suitable in certain scenarios compared to C-HUT, which relies solely on a written protocol. Overall, these findings suggest that C-HUT and O-HUT are suitable methods for collecting sensory data and overcoming geographic and face-to-face contact limitations, providing greater flexibility, and reducing the time and cost associated with traditional sensory evaluations.

Determination of o-quinones in foods by a derivative strategy combined with UHPLC-MS/MS.

As primary polyphenol oxidant products, the occurrence of o-quinone is greatly responsible for quality deterioration in wine, including browning and aroma loss. The high reactivity of o-quinone causes huge difficulty in its determination. Herein, a derivative strategy combined with UHPLC-MS/MS analysis was established with chlorogenic acid quinone (CQAQ) and 4-methylcatechol quinone (4MCQ) as model compounds. Method validation demonstrated its efficiency for two analytes (R2 > 0.99, accuracy 98.71-106.39 %, RSD of precision 0.46-6.11 %, recovery 85.83-99.37 %). This approach was successfully applied to detect CQAQ and 4MCQ, suggesting its applicability in food analysis. CQAQ in coffee was much more than 4MCQ and with the deepening of baking degree, CQAQ decreased and 4MCQ increased. The amounts of CQAQ in various vegetables were markedly different, seemingly consistent with their respective browning degrees in practical production. This study developed an accurate and robust analytical approach for o-quinones, providing technical support for their further investigation in foods.

Whey protein concentrate and skimmed milk powder as encapsulation agents for coffee silverskin extracts processed by spray drying.

We tested the hypothesis that milk proteins, through microencapsulation, guarantee protection against bioactive substances in coffee silverskin extracts. Therefore, the aim of this study was to carry out technological, nutritional and physicochemical characterisation of a coffee silverskin extract microencapsulated using instant skim milk powder and whey protein concentrate as wall materials. The aqueous extract of coffee silverskin was spray-dried using 10% (w/v) skim milk powder and whey protein concentrate. The samples were characterised by determining the water content, water activity, particle size distribution, colour analysis and total phenolic compound content as well as antioxidant activity using 2,2-diphenyl-radical 1-picrylhydrazyl scavenging methods, nitric oxide radical inhibition and morphological analysis. The product showed water activity within a range that ensured greater stability, and the reduced degradation of the dried coffee silverskin extract with whey protein concentrate resulted in better rehydration ability. The luminosity parameter was higher and the browning index was lower for the encapsulated samples than for the pure coffee silverskin extract. The phenolic compound content (29.23 ± 8.39 and 34.00 ± 8.38 mg gallic acid equivalents/g for the coffee silverskin extract using skimmed milk powder and whey protein concentrate, respectively) and the antioxidant activity of the new product confirmed its potential as a natural source of antioxidant phenolic compounds. We conclude that the dairy matrices associated with spray drying preserved the bioactive and antioxidant activities of coffee silverskin extracts.

Unlocking the potential of spent coffee grounds via a comprehensive biorefinery approach: production of microbial oil and carotenoids under fed-batch fermentation.

The valorization of renewable feedstock to produce a plethora of value-added products could promote the transition towards a circular bioeconomy. This study presents the development of cascade processes to bioconvert spent coffee grounds (SCGs) into microbial oil and carotenoids employing sustainable practices. The stepwise recovery of crude phenolic extract and coffee oil was carried out using green or recyclable solvents, i.e., aqueous ethanol and hexane. Palmitic acid (43.3%) and linoleic acid (38.9%) were the major fatty acids in the oil fraction of SCGs. The LC-MS analysis of crude phenolic extracts revealed that chlorogenic acid dominated (45.7%), while neochlorogenic acid was also detected in substantial amounts (24.0%). SCGs free of coffee oil and phenolic compounds were subjected to microwave-assisted pretreatment under different irradiations and solvents to enhance subsequent enzymatic saccharification. Microwave/water pretreatment at 400 W, followed by enzymatic hydrolysis with proteases, hemicellulases, and cellulases, at 50 g/L initial SCGs, led to satisfying overall yields of cellulose (75.4%), hemicellulose (50.3%), and holocellulose (55.3%). Mannan was the most extractable polysaccharide followed by galactan and arabinan. SCGs hydrolysate was used in fed-batch bioreactor fermentations with Rhodosporidium toruloides to produce 24.0 g/L microbial oil and carotenoids of 432.9 µg/g biomass.

Polyphenols vs. Caffeine in Coffee from Franchise Coffee Shops: Which Serving of Coffee Provides the Optimal Amount of This Compounds to the Body.

The scientific literature indicates that there is a limited number of data on the content of bioactive components in coffees consumed "on the go". Therefore, this study examined the polyphenol and caffeine content of different types of coffee from franchise coffee shops, and the caffeine/total polyphenol ratio. The five most popular types of coffee purchased in six franchise coffee shops in Warsaw were analysed. A total of 120 coffee samples were tested. A significant positive (r = 0.7407, p < 0.001) correlation was found between the total polyphenol and caffeine content in all coffee types tested. Per unit volume, espresso coffee had the highest significant (p < 0.005) average total polyphenol and caffeine contents (232.9 ± 63.9 mg/100 mL and 198.6 ± 68.3 mg/100 mL, respectively). After taking into account the coffee's serving size, a serving of Americano provided significantly (p < 0.05) the most total polyphenol (average 223.5 ± 81.5 mg), while the highest caffeine content was provided by a serving of ice latte/latte frappe (average 136 ± 57.0 mg). The most favourable ratio of caffeine to total polyphenols (0.56) was found in a serving of Americano coffee; therefore, it seems that this coffee can be considered optimal in terms of the content of both compounds. These findings demonstrate that the polyphenol and caffeine contents of coffees offered in franchise coffee shops are closely related to the serving size.

Do Young Consumers Care about Antioxidant Benefits and Resveratrol and Caffeic Acid Consumption?

Resveratrol and caffeic acid are some of the most consumed antioxidants during the day, so their importance as sources and their benefits need to be evaluated and updated. This survey aimed not only to analyze whether young Romanian consumers are informed about the benefits of antioxidants in general, and resveratrol and caffeic acid in particular, but also to observe the degree of nutritional education of these participants. Young consumers know the concept of antioxidants relatively well; they managed to give examples of antioxidants and indicate their effects. The majority of those chosen drink wine and coffee, but many are unaware of their health advantages and antioxidant properties. Students are less familiar with the antioxidant chemicals resveratrol and caffeic acid. It is advised to have a thorough understanding of these significant antioxidants and their nutritional content as they are present in our regular diets, and further studies on different kinds of antioxidants are required to increase the awareness of people concerning their importance in daily life.

Edge based metric dimension of various coffee compounds.

An important dietary source of physiologically active compounds, coffee also contains phenolic acids, diterpenes, and caffeine. According to a certain study, some coffee secondary metabolites may advantageously modify a number of anti-cancer defense systems. This research looked at a few coffee chemical structures in terms of edge locating numbers or edge metric size to better understand the mechanics of coffee molecules. Additionally, this research includes graph theoretical properties of coffee chemical structures. The chemicals found in coffee, such as caffeine, diterpene or cafestol, kahweol, chlorogenic, caffeic, gallotannins, and ellagitannins, are especially examined in these publications.

An Optimized Method for Evaluating the Preparation of High-Quality Fuel from Various Types of Biomass through Torrefaction.

The pretreatment for torrefaction impacts the performance of biomass fuels and operational costs. Given their diversity, it is crucial to determine the optimal torrefaction conditions for different types of biomass. In this study, three typical solid biofuels, corn stover (CS), agaric fungus bran (AFB), and spent coffee grounds (SCGs), were prepared using fluidized bed torrefaction. The thermal stability of different fuels was extensively discussed and a novel comprehensive fuel index, "displacement level", was analyzed. The functional groups, pore structures, and microstructural differences between the three raw materials and the optimally torrefied biochar were thoroughly characterized. Finally, the biomass fuel consumption for household heating and water supply was calculated. The results showed that the optimal torrefaction temperatures for CS, AFB, and SCGs were 240, 280, and 280 °C, respectively, with comprehensive quality rankings of the optimal torrefied biochar of AFB (260) > SCG (252) > CS (248). Additionally, the economic costs of the optimally torrefied biochar were reduced by 7.03-19.32%. The results indicated that the displacement level is an index universally applicable to the preparation of solid fuels through biomass torrefaction. AFB is the most suitable solid fuel to be upgraded through torrefaction and has the potential to replace coal.

Novel enhancement of interfacial interaction and properties in biodegradable polymer composites using green chemically treated spent coffee ground microfiller.

This study investigates the potential of utilizing green chemically treated spent coffee grounds (SCGs) as micro biofiller reinforcement in Poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) biopolymer composites. The aim is to assess the impact of varying SCG concentrations (1 %, 3 %, 5 %, and 7 %) on the functional, thermal, mechanical properties and biodegradability of the resulting composites with a PHBV matrix. The samples were produced through melt compounding using a twin-screw extruder and compression molding. The findings indicate successful dispersion and distribution of SCGs microfiller into PHBV. Chemical treatment of SCG microfiller enhanced the interfacial bonding between the SCG and PHBV, evidenced by higher water contact angles of the biopolymer composites. Field Emission Scanning Electron Microscopy (FE-SEM) confirmed the successful interaction of treated SCG microfiller, contributing to enhanced mechanical characteristics. A two-way ANOVA was conducted for statistical analysis. Mass losses observed after burying the materials in natural soil indicated that the composites degraded faster than the pure PHBV polymer suggesting that both composites are biodegradable, particularly at high levels of spent coffee grounds (SCG). Despite the possibility of agglomeration at higher concentrations, SCG incorporation resulted in improved functional properties, positioning the green biopolymer composite as a promising material for sustainable packaging and diverse applications.

Optimization and validation of high throughput methods for the determination of 132 organic contaminants in green and roasted coffee using GC-QqQ-MS/MS and LC-QqQ-MS/MS.

Recently some major safety concerns have been raised on organic contaminants in widely consumed plants such as coffee. Hence, this study aimed to develop specifically optimized methods for determining organic contaminants, such as pesticides and polychlorinated biphenyls (PCBs), in coffee using GC-MS/MS and LC-MS/MS. QuEChERS method was used as a base extraction method, and 27 experiments were studied using design of experiments with categorical variables (extraction buffers, cleanup sorbents, and coffee roasting degree) to find the optimum method for each matrix type. The optimum method for green coffee was acetate buffer and chitosan for clean-up, while no-buffer extraction and the PSA + C18 method were ideal for light and dark-roasted coffee. The optimized methods were validated in accordance with SANTE/11312/2021. Furthermore, ten real samples (4 green, and 6 roasted) from the markets were analysed; ortho-phenylphenol was found in all the roasted coffee samples, and carbendazim was found in one green coffee sample.

Effects of ultrafiltration membrane processing on the metabolic and sensory profiles of coffee extracts.

In the coffee industry, the use of natural coffee extracts with differentiated attributes is desirable to drive new product development. This study evaluates the impact of ultrafiltration membrane processing on the sensory, metabolic, and physicochemical attributes of four commercially available coffee extracts: cold brew, lightly roasted, freeze concentrated and evaporated standard. The sensory analysis revealed an increase in acidity in the permeate across all extracts, with the most significant profile changes observed in the lightly roasted evaporated and evaporated extracts, accompanied by an enhancement of fruity and floral attributes. Furthermore, the permeate showed reduced total dissolved solids, while the caffeine concentration increased. Metabolomic analysis highlighted key coffee-related metabolites like cinnamic and coumaric acids, explaining observed variations due to their passage through the membrane. Our findings emphasize the potential of permeate as a coffee-based ingredient for ready-to-drink products development, providing a unique coffee experience with organoleptic profiles distinct from traditional beverages.

Coffee brewing sonoreactor for reducing the time of cold brew from several hours to minutes while maintaining sensory attributes.

This research designed and developed an ultrasonic reactor for a fast and on demand production of cold brew coffee, remarkably reducing the brewing time from 24 h to less than 3 min. The technology was engineered by utilizing resonance to induce ultrasonic waves around the walls of the brewing basket of an espresso machine. The sound transmission system comprised a transducer, a horn and a brewing basket. This arrangement transformed the coffee basket into an effective sonoreactor that injected sound waves at multiple points through its walls, thereby generating multiple regions for acoustic cavitation within the reactor. Furthermore, acoustic streaming induced greater mixing and enhanced mass transfer during brewing. The design was accomplished by modeling the transmission of sound, and acoustic cavitation. Brew characterization and chemical composition analysis was performed, considering factors such as pH, acidity, color, and the composition of caffeine, fatty acids, and volatiles. The efficiency of the extraction increased by decreasing the basket loading percentage (BLP). For instance, sonicating at 100 W doubled the extraction yield and caffeine concentration, from 15.05 % to 33.44 % at BLP = 33 %, and from 0.91 mg/mL to 1.84 mg/mL at BLP = 67 %, respectively. The total fatty acids increased from 1.16 mg/mL to 9.20 mg/mL, representing an eightfold increase, at BLP = 33 %. Finally, a sensory analysis was conducted to evaluate appearance, aroma, texture, flavor, and aftertaste, which demonstrated that coffee brewed for 1 and 3 min in the sonoreactor exhibited almost undistinguishable properties compared to a standard 24 h brewing without ultrasound.

Characteristics of hydrogen energy yield in steam gasification of coffee residues.

Coffee residues (CRs) were gasified using a laboratory-scale fluidized bed gasifier with an air/steam mixture as the carrier gas. The gasification was conducted at an equivalence ratio (ER) of 0.3, and different operation temperatures (700, 800, and 900 °C) and steam-to-biomass (S/B) ratios (0, 0.75, and 1.5) were applied. Increasing temperature without steam boosted H2 and CO concentrations in producer gas, raising lower heating value (LHV) and cold gas efficiency (CGE) through endothermic reactions like Boudouard, tar cracking, and water-gas formation. At 900 °C, gas had LHV of 3.76 MJ/Nm3 and CGE of 22.47%. It was elevating temperature from 700 to 900 °C and S/B ratio to 1.5 raised H2 and CO concentrations from 2.04 to 8.60% and from 9.56 to 11.8%, respectively. This also increased LHV from 2.23 to 3.89 MJ/Nm3 and CGE from 11.28 to 25.08%. The steam gasification reaction was found to increase the H2 concentration and was thus considered effective in converting CRs to syngas and increasing energy production. Overall, the study successfully demonstrated the feasibility of steam gasification as a means of converting coffee residues to syngas and increasing energy production. The results also highlighted the importance of operating temperature and S/B ratio in improving the gasification process.

Carboxymethyl cellulose-based multifunctional film integrated with polyphenol-rich extract and carbon dots from coffee husk waste for active food packaging applications.

Sustainable carboxymethyl cellulose (CMC)-based active composite films were developed through the addition of polyphenol-rich extract from coffee husk (CHE) and carbon dots (CDs) prepared using the biowaste residue of CHE extraction. The influences of various CDs contents on the physicochemical and functional characteristics of composite films have been researched. The 6% (w/w) CHE and 3% (w/w) CDs were uniformly dispersed within the CMC matrix to produce a homogenous film with enhanced mechanical properties. The CMC/CHE/CDs3% film exhibited outstanding UV-light blocking, improved water and gas barriers, potent antioxidant activity with above 95% DPPH and ABTS scavenging rates, and effective antibacterial capabilities against L. monocytogenes and E. coli. The food packaging experiment demonstrated that this active composite film slowed the rotting of fresh-cut apples and extended their shelf-life to 7 days at 4 °C storage. Therefore, the obtained multifunctional film showed promise as an environmentally friendly food packaging material.

Effects of Caffeinated Coffee on Cross-Country Cycling Performance in Recreational Cyclists.

The ergogenic effects of acute caffeine intake on endurance cycling performance lasting ~1 h have been well documented in controlled laboratory studies. However, the potential benefits of caffeine supplementation in cycling disciplines such as cross-country/mountain biking have been rarely studied. In cross-country cycling, performance is dependent on endurance capacity, which may be enhanced by caffeine, but also on the technical ability of the cyclist to overcome the obstacles of the course. So, it is possible that the potential benefits of caffeine are not translated to cross-country cycling. The main objective of this study was to investigate the effects of acute caffeine intake, in the form of coffee, on endurance performance during a cross-country cycling time trial. Eleven recreational cross-country cyclists (mean ± SD: age: 22 ± 3 years; nine males and two females) participated in a single-blinded, randomised, counterbalanced and crossover experiment. After familiarisation with the cross-country course, participants completed two identical experimental trials after the ingestion of: (a) 3.00 mg/kg of caffeine in the form of soluble coffee or (b) 0.04 mg/kg of caffeine in the form of decaffeinated soluble coffee as a placebo. Drinks were ingested 60 min before performing a 13.90 km cross-country time trial over a course with eight sectors of varying technical difficulty. The time to complete the trial and the mean and the maximum speed were measured through Global Positioning System (GPS) technology. Heart rate was obtained through a heart rate monitor. At the end of the time trial, participants indicated their perceived level of fatigue using the traditional Borg scale. In comparison to the placebo, caffeine intake in the form of coffee significantly reduced the time to complete the trial by 4.93 ± 4.39% (43.20 ± 7.35 vs. 41.17 ± 6.18 min; p = 0.011; effect size [ES] = 0.300). Caffeine intake reduced the time to complete four out of eight sectors with different categories of technical difficulty (p ≤ 0.010; ES = 0.386 to 0.701). Mean heart rate was higher with caffeine (169 ± 6 vs. 162 ± 13 bpm; p = 0.046; ES = 0.788) but the rating of perceived exertion at the end of the trial was similar with caffeinated coffee than with the placebo (16 ± 1 vs. 16 ± 2 a.u.; p = 0.676; ES = 0.061). In conclusion, the intake of 3 mg/kg of caffeine delivered via soluble coffee reduced the time to complete a cross-country cycling trial in recreational cyclists. These results suggest that caffeine ingested as coffee may be an ergogenic substance for cross-country cycling.