Effectiveness of different intrusion modes of maxillary anterior teeth with mini-implants in clear aligner treatment: a three-dimensional finite element analysis.

BACKGROUND: The intrusion of maxillary anterior teeth is often required and there are various intrusion modes with mini-implants in clear aligner treatment. The objective of this study was to evaluate the effectiveness of maxillary anterior teeth intrusion with different intrusion modes, aiming to provide references for precise and safe intrusion movements in clinical practice. METHODS: Cone-beam computed tomography and intraoral optical scanning data of a patient were collected. Finite element models of the maxilla, maxillary dentition, periodontal ligaments (PDLs), clear aligner (CA), attachments, and mini-implants were established. Different intrusion modes of the maxillary anterior teeth were simulated by changing the mini-implant site (between central incisors, between central and lateral incisor, between lateral incisor and canine), loading site (between central incisors, on central incisor, between central and lateral incisor, between lateral incisor and canine), and loading mode (labial loading and labiolingual loading). Ten conditions were generated and intrusive forces of 100 g were applied totally. Then displacement tendency of the maxillary anterior teeth and CA, and stress of the PDLs were analyzed. RESULTS: For the central incisor under condition L14 and for the canine under conditions L11, L13, L23, and L33, the intrusion amount was negative. Under other conditions, the intrusion amount was positive. The labiolingual angulation of maxillary anterior teeth exhibited positive changes under all conditions, with greater changes under linguoincisal loading. The mesiodistal angulation of canine exhibited positive changes under labial loading, while negative changes under linguoincisal loading except for condition L14. CONCLUSIONS: The intrusion amount, labiolingual and mesiodistal angulations of the maxillary anterior teeth were affected by the mini-implant site, loading site, and loading mode. Labial and linguoincisal loading may have opposite effects on the intrusion amount of maxillary anterior teeth and the mesiodistal angulation of canine. The labiolingual angulation of the maxillary incisors would increase under all intrusion modes, with greater increases under linguoincisal loading.

Evaluation of the Golden Proportion, Golden Percentage, and Recurring Esthetic Dental Proportion in Kenyans of African Descent.

OBJECTIVES: To evaluate the validity of the Golden Proportion, Golden Percentage, and Recurring Esthetic Dental (RED) Proportion among Kenyans of African descent with naturally well-aligned teeth. MATERIALS AND METHODS: Standardized frontal photographic images of the smiles of 175 participants aged 18-35 years were obtained, and Adobe Photoshop was used to analyze and measure the frontal widths of the maxillary central and lateral incisors and canines in triplicate. The average teeth widths were calculated to determine the existence of the Golden Proportion, Golden Percentage, and RED Proportion, and their validity using independent sample t-tests to compare the differences in the mean teeth widths at α < 0.05. RESULTS: The number of male and female participants was 107 (61.1%) and 68 (38.9%), respectively. The Golden Proportion between the maxillary central and lateral incisors was found in 4.0% on the right and 2.8% on the left of all the participants, but between the maxillary lateral incisors and canines was found in only 0.6% on the right of male participants (p < 0.0001). The RED Proportion between the maxillary lateral and central incisors was in the range of 67%-70%, and between the canines and lateral incisors was 82%-84% (p < 0.0001). The proportion of RED was not constant, and gradually increased distally. The Golden Percentage of 15% was observed in the lateral incisors bilaterally; however, in the central incisors and the canines, the Golden Percentage was 22% and 12%, respectively. CONCLUSION: The Golden and RED Proportions were invalid determinants of anterior teeth proportions. The Golden Percentage existed only in the lateral incisors. The Golden Proportion, RED Proportion, and Golden Percentage theories may not be applicable to all populations when designing smiles. Racial and ethnic backgrounds are important considerations to establish objective quantifiable values of anterior tooth proportions that are beneficial for esthetic restorations.

Evaluation of Mesiodistal Angulation of Maxillary Anterior Teeth in Incisal View Using Manual and Digital Methods: An In Vivo Study.

AIM: The aim of the present research was to assess the mesiodistal angulation of the maxillary anterior teeth utilizing Image J computer software, a Profile projector, and a Custom-made jig. MATERIALS AND METHODS: A total of 34 subjects (17 males and 17 females) were chosen from a group of 18-30 years old with bilateral Angle Class I molars and canine relationships. One manual approach (Custom-made jig) and two digital methods (J computer software, a Profile projector) were used to record the mesiodistal angulation in incisal view. The individuals had alginate impressions made, and a facebow was used to capture the maxilla's spatial relationship with the cranium. The articulated cast with the help of mounting ring moved to the specially customized jig, then the angulations was measured in the incisal view after the casts were placed in a semi-adjustable articulator. Data were recorded and statistically analyzed. RESULTS: The mesiodistal angulation in the incisal view via three methods between the 17 males and 17 females has statistically significant different. Although the mesiodistal angulation for maxillary lateral incisor and canine did not show any statistically significant difference, the maximum and minimum values obtained were always greater in males in comparison with the females. This indicates that the positions of six maxillary anterior teeth in the males resulted in the creation of upward sweep of incisal edges of central and lateral incisors which was also referred to as "smiling line" producing masculine surface anatomy more squared and vigorous while feminine surface anatomy being more rounded, soft, and pleasant. There was no statistically significant difference between the right and left sides, indicating bilateral arch symmetry and the symmetrical place of the right teeth compared with the left side's corresponding teeth. CONCLUSION: On conclusion, according to the current study's findings, all three approaches can measure the mesiodistal angulations of maxillary anterior teeth in incisal view with clinically acceptable accuracy. The digital methods, which included using the Image J computer software and the profile projector, achieved more accurate results than the manual method. CLINICAL SIGNIFICANCE: The outcomes of this study's mesiodistal angulations can be used as a reference for placing teeth in both fully and partially edentulous conditions. This study contributes to a better understanding of the importance of achieving the ideal occlusion in the Indian population by placing the maxillary anterior teeth at the proper mesiodistal angulation. How to cite this article: Shadaksharappa SH, Lahiri B, Kamath AG, et al. Evaluation of Mesiodistal Angulation of Maxillary Anterior Teeth in Incisal View Using Manual and Digital Methods: An In Vivo Study. J Contemp Dent Pract 2024;25(4):320-325.

Changes in the arch width and buccal corridor after fixed orthodontic treatment with Damon self-ligating system: premolar extraction vs. non-extraction.

INTRODUCTION: Extraction vs. non-extraction is a crucial decision in orthodontic therapy. OBJECTIVE: The aim of the present study was to investigate the changes in the dental arch width and buccal corridor after orthodontic treatment using extraction and non-extraction therapy with Damon self-ligating system. MATERIAL AND METHODS: This retrospective study consisted of 35 patients (20 female and 15 male patients with median age of 12.5 years), treated by extracting 4 or 2 premolars, and 37 patients (16 female and 21 male patients with the median age of 12.8 years), treated without premolar extraction. Both groups were treated with Damon self-ligating system. Plaster models before (T0) and after (T1) treatment were measured, and the arch width values were determined at the level of the first molars, second premolars, canines and palatal rugae. Buccal corridor width was measured using the extraoral images at T0 and T1. Paired t-test was used for the analysis of the normally distributed data, and Wilcoxon Mann-Whitney U test was used for the data with non-normal distribution. Values of p<0.05 were set as statistically significant. RESULTS: The upper intercanine width increased significantly in both groups (p<0.01). In the non-extraction group, the arch width increased significantly in the maxillary second premolar and first molar region (p<0.01) as well as in the region of the canines (p=0.04), second premolars (p=0.01) and first molars (p<0.01) of the mandible. The buccal corridor decreased significantly in the non-extraction group (p<0.01). CONCLUSION: Premolar extraction in combination with Damon self-ligating system did not lead to reduction of the dental arch width in the maxilla, nor did it increase the size of the buccal corridors.

Radiographic evaluation of enamel thickness of permanent teeth: relevance and applicability.

OBJECTIVE: This descriptive observational study aimed to determine clinically relevant and applicable data of enamel thickness (ETH), considering the mesio-distal differences of anterior and posterior permanent teeth and their relationships. MATERIAL AND METHODS: The sample consisted of right-sided standardized radiographs of 34 individuals (21 females and 13 males), aged between 13 and 24 (average 16) years, with all permanent teeth intact and without crowding. Four periapical and four interproximal radiographs were obtained and digitized. ETH measurements (mesial to distal contact points at the dentin-enamel junction) were performed after correction for radiographic image magnification. The Students' t-test was applied to the differences between paired means, with the Pearson correlation to evaluate the correlation between them. RESULTS: The mesial and distal ETH increased from the anterior to the posterior teeth. Incisor ETH ranged between 0.60 and 0.84 mm. Canines, premolars, and molars were more than 1.0 mm thick, and molar enamel reached values between 1.26 and 1.44 mm. CONCLUSION: Distal ETH was significantly greater than the mesial ETH, and progressively thicker from the anterior to posterior teeth. Interproximal reduction (IPR) of the lower central and upper lateral incisors should be avoided, reduced, or performed on their distal surfaces. There is a positive and significant correlation between ETH and the mesial and distal surfaces of the teeth. Periapical radiographs and evaluation of the remaining ETH are necessary in cases of retreatment. The location and number of tooth size discrepancies should be considered in treatment planning and appropriately compensated with IPR.

Efficacy of WaveOne Gold and ProDesign RT systems in removing filling material: a micro-CT analysis.

The remaining filling material after retreatment can harbor bacteria and organic tissues that can influence the outcome of the therapy. AIM: The aim of this study was to evalúate, by micro-CT, the amount of filling material remaining in the root canal after its removal using WaveOne Gold or ProDesign RT. MATERIAL AND METHOD: Forty human mandibular canines were instrumented with the ProTaper Next system up to the X2 instrument (25.06) and filled with gutta-percha cones and AHPlus. Teeth were divided into 2 groups (n=20): WaveOne Gold 25.07 (WOG) and ProDesign RT 25.08 (PRT) for filling removal, after which they were scanned in a micro-CT device to quantify the volume of remaining filling material. The data were subjected to log 10 transformation, Student 's t-test was performed to account for multiple observationsper sample, significance was set at 5%. RESULTS: Student 's t-test showed that there was no difference between the two systems regarding the volume of remaining filling material in the thirds: apical (p = 0.392), middle (p = 0.065), or cervical (p = 0.918). CONCLUSIÓN: Remaining filling material was present in all groups and both systems were similar in removing root filling material in mandibular canines.

A permanencia de material obturador após o retratamento pode abrigar bactérias e tecidos orgánicos que podem influenciar o resultado da terapia. OBJETIVO: O objetivo deste estudo foi avaliar, por micro-CT, a quantidade de material obturador remanescente no canal radicular após a desobturagdo com WaveOne Gold e ProDesign RT. MATERIAL E MÉTODO: Quarenta caninos inferiores humanos foram instrumentados com o sistema ProTaper Next até o instrumento X2 (25.06) e obturados com cones de guta-percha e AHPlus. Os dentes foram divididos em dois grupos (n=20): WaveOne Gold 25.07 (WOG) e ProDesign RT 25.08 (PRT) e escaneados em micro-CT para quantificagdo do volume de material obturador remanescente. Os dados foram submetidos á transformando log 10, o teste t de Student foi realizado para contabilizar múltiplas observagoes por amostra, a significáncia foi fixada em 5%. RESULTADOS: O teste t de Student mostrou que ndo houve diferenga no volume de material obturador remanescente entre os dois sistemas nos tergos: apical (p = 0,392), médio (p = 0,065) ou cervical (p = 0,918). CONCLUSÃO: O material obturador remanescente estavapresente em todos os grupos e ambos os sistemas foram semelhantes na remogdo do material obturador radicular nos caninos inferiores.

Aesthetic assessment of maxillary lateral and canine implant-supported crowns by laypersons and orthodontists.

INTRODUCTION: The objectives of this study were to evaluate how laypersons and orthodontists evaluate and rank aesthetic parameters of an implant-supported crown (ISC) on the canine position (ISC-C) and lateral position (ISC-L). METHODS: A digital survey of 11 cases, 5 ISC-C, 5 ISC-L and 1 control case without ISC, was distributed to 207 laypersons and 296 orthodontists. All cases included one extraoral photograph and three intraoral photographs. The respondents were asked to identify the ISC and to evaluate the aesthetic parameters regarding colour of the implant (CI), shape of the implant (SI) and gingival colour around ISC (GCI). Differences within and between the groups were tested using Chi-2-test and Independent-Samples t-test. RESULTS: All invited laypersons and 184 orthodontists (62% response rate) answered the survey. Orthodontists (89%) more correctly identified the ISC, regardless of its position, than laypersons (50%) (p < 0.001). Both laypersons (54%) and orthodontists (23%) rated higher proportions of acceptance of CI, SI and GCI in favour for the ISC-L than ISC-C (laypersons: 40%, orthodontists: 10%) (p < 0.001). Assessing each parameter separately, orthodontists rated higher for ISC-L, compared to the ISC-C (p < 0.001). In general, laypersons and orthodontist ranked tooth colour (mean, standard deviation [SD]:8.0,1.5 and 9.0, 1.0) and tooth shape (mean, SD: 8.0, 1.7 and 8.8, 1.2) as aesthetically higher than the gingival colour (mean, SD: 7.2, 2.2 and 8.0, 1.7) (p > 0.001).  Conclusion: Laypersons and orthodontists consider the ISC-L as aesthetically more preferable, compared to the ISC-C.

Efficacy for Lidocaine and Articaine in Inferior Alveolar Nerve Block - A Comparative Study.

AIMS: Compare the efficacy of 2% lidocaine with adrenaline (1:200,000) and 4% articaine with adrenaline (1:100,000) in inferior alveolar nerve block prior to extraction of bilateral teeth posterior to canine in interval of one week. METHODS AND MATERIAL: Thirty-five patients were selected for the study. Patients were divided into two different groups: Group 1 - (2% lignocaine with adrenaline (1:200,000)) and Group 2 - (4% articaine with adrenaline (1:100,000)) solution. The study variables for each anaesthetic agent were: onset of action and depth of anaesthesia. A pulp tester was used to demonstrate quantitative values and a visual analogue scale (VAS) was used for qualitative evaluation of the two anaesthetic drugs in 2 min cycle for 10 min with respect to test canine. Anaesthesia was considered successful when pulp tester value 64 was achieved in 10 min for both the anaesthetic agent. STATISTICAL ANALYSIS USED: The difference in the efficacy of lignocaine and articaine was analysed using Student's t test. Within group comparison of the response to the pulp vitality test and VAS over various time periods was analysed using repeated measures Analysis of Variance (ANOVA) with post-hoc Bonferroni test. RESULTS: Data analysis showed statistical differences in onset and depth of anaesthesia between the two groups (P < 0.05). CONCLUSIONS: 4% Articaine with adrenaline (1:100,000) onset of action is faster and depth of anaesthesia is better compared to 2% lignocaine with adrenaline (1:200,000). Many previous studies reported onset of anaesthesia, but this study evaluates onset and depth of both the anaesthetic agent quantitatively and qualitatively.

Are deciduous upper molars and lower canines useful for sex estimation?

OBJECTIVE: This paper investigates whether deciduous upper molars and lower canines have sexual dimorphic features, exploring these teeth' dimensions and the presence of Zuckerkandl's tubercle and Carabelli's cusp on the first and second upper molars. DESIGN: We analyzed 64 pairs of dental plaster casts from 34 females and 30 males aged between 3 and 12 years. We measured the first and second deciduous upper molars and the lower deciduous canines (maximum mesiodistal and buccolingual length), and we registered the presence of the Zuckerkandl's tubercle and the Carabelli's cusp on the first and second upper molars, respectively. RESULTS: Regarding the differentiation between sexes using Carabelli's cusp and Zuckerkandl's tubercle, the classification was not independent of Carabelli's cusp presence only for tooth 65 (p = 0.035). In all other teeth, whether for Carabelli's cusp or Zuckerkandl's tubercle, their presence was similar for both sexes. There were statistically significant differences between sexes (p < 0.05) for the buccolingual measurements of both upper second molars, the first right upper molar, and the right canine. The developed model allowed for a 64.1% accuracy in sex estimation. CONCLUSIONS: The study suggests that while Carabelli's cusp and Zuckerkandl's tubercle in upper deciduous molars don't consistently differ between sexes, tooth size, particularly the buccolingual measurements of certain teeth, including upper deciduous molars and lower canines, may provide a more reliable criterion for sex estimation. The developed model depicted moderate accuracy, underscoring the need for a multifactorial approach when estimating sex from skeletal remains. It suggests that while dental features can contribute to sex estimation, they should be used in conjunction with other skeletal or molecular markers to improve accuracy.

Root Regeneration with Photobiomodulation of an Upper Lateral Incisor Associated with Root Resorption Due to an Impacted Maxillary Canine: A Case Report.

Objective: To present a case report of maxillary lateral incisor root regeneration after severe root resorption, treated with photobiomodulation (PBM). Background: Impacted maxillary canines often come with the risk of maxillary lateral incisor root resorption, which is widely recognized as the predominant adverse effect in these situations. This progressive process of root resorption is currently irreversible, with no known way to reverse it. Materials and methods: A male patient was 14 years old. Radiographically it was observed that canine 23 is impacting against the root of 22 producing signs of root resorption and having a less than 1:1 crown-to-root ratio with mobility grade 1. From the beginning of the treatment, PBM-assisted orthodontics was proposed. To address the patient's dental concerns, the treatment plan outlined the extraction of the deciduous upper left canine tooth leaving the lateral as long as possible in the mouth. During each appointment, PBM was applied with a diode laser. The wavelength was 810 nm, Ap = 0.2 W, 4.4 J, 22 sec every 21 days, 13 applications in total (57.2J), with a 400 µm inactive surgical tip, in a scanning movement, 1 mm from the mucosa while moving following the vestibular surface of the upper left lateral and canine roots. Results: After 12 months, the 22 had root neoformation and complete closure of the apex with vitality. Conclusions: PBM with an 810 nm diode laser in this clinical case promoted root regeneration of an upper lateral incisor, with severe root resorption, owing to an impacted maxillary canine while still vital.

Autotransplantation of an inverse impacted dilacerated incisor: a case report with 11-year follow-up.

BACKGROUND: Dilaceration can lead to impaction of maxillary incisors, resulting in both aesthetic and functional problems. This case report presents the multidisciplinary approach to managing an inverse impacted dilacerated left lateral incisor in a 9-year-old male patient. CASE REPORT: The orthodontic alignment of the remaining three incisors was achieved within six months. After using the diode laser to remove the gingiva covering the right lateral incisor during alignment process, a lingual button was bonded. The primary left canine and the impacted permanent left lateral incisor were extracted by raising the full-thickness mucoperiosteal flap, followed by the transplantation of the dilacerated lateral incisor into its correct position, splinted to the adjacent central incisors using composite resin. Root canal treatment was performed after the apical plug was created with mineral trioxide aggregate. The composite splint was removed after three weeks, and a new bracket was bonded to the left lateral incisor. It was left passively for 18 months until the permanent canines started to erupt. Light orthodontic forces were then applied for six months, and a passive eruption was expected over three months to properly position the canines within the dental arch. After an 11-year follow-up, the incisor displayed no clinical symptoms, although radiographic examination revealed external resorption in the long-term. CONCLUSION: This case demonstrates the successful and fast autotransplantation of an immature inverse impacted dilacerated incisor, highlighting the long-term clinical success and favorable aesthetic outcomes.

Canine sexual dimorphism in crown and root dimensions: a cone-beam computed tomographic study.

The primary step in forensic odontological analysis is sex determination. The present study is one of the few studies that evaluated the accuracy of the combination of canine tooth root length and crown measurements for sex determination. The study sample comprised 196 cone-be am computed tomographic scans of individuals aged 20-80 years distributed in five age categories: 20-29, 30-39, 40-49, 50-59, and 60+ years old. Different parameters, such as width, length, and ratio measurements for the crown and root of each maxillary and mandibular canine tooth, were examined and recorded. The findings indicated that maxillary canines had greater sex dimorphism ability (87.3%) than mandibular canines (80.6%). Total tooth length and root length of maxillary canine were the most pronounced variables in the differentiation of sex groups. When the combination of the mandibular and maxillary measurements was considered, the accuracy for sex dimorphism was 85.7%. By using ratio variables, the accuracy was reduced to 68.9%. According to the findings of this study, total tooth length and root length are the most discriminant variables of canine teeth. These variables are more reliable sex indicators than crown measurements.

[A two-dimensional photographic and three-dimensional digital dental model comparative analysis in maxillary anterior teeth].

Objective: To assess the accuracy of two-dimensional (2D) photographs in measuring esthetic parameters of the maxillary anterior teeth by comparing them with measurements obtained from three-dimensional (3D) dental models. Methods: A total of one hundred volunteers (49 males, 51 females, aged 18-23 years) were recruited from School and Hospital of Stomatology, Wuhan University from January to February 2024. 3D digital models of their dentitions were obtained using an intraoral scanner, and standardized frontal 2D intraoral photographs were captured with a digital camera. The lengths, widths and width/length ratio of the bilateral incisors, lateral incisors and canines were measured on both the 3D digital models and the 2D intraoral photographs. The width ratios of adjacent maxillary anterior were also calculated on the 2D intraoral photographs and the frontal view of 3D digital models. Results: The widths of lateral incisors [(5.85±0.60) mm] and canines [(4.73±0.71) mm] and the lengths of canines [(8.72±0.96) mm] in the 2D intraoral photographs were significantly lower than those in 3D digital models [(6.65±0.59), (7.76±0.60), (8.90±0.86) mm] (t=-18.24, P<0.001; t=-54.43, P<0.001; t=-4.40, P<0.001), while there were no significant differences in the lengths and widths of the other teeth (P>0.05). The width/length ratios measured from the 2D intraoral photographs for the lateral incisors and canines (0.74±0.08, 0.55±0.08) were significantly lower than those measured in the 3D digital models (0.84±0.09, 0.88±0.09) (t=-19.68, P<0.001; t=-50.21, P<0.001), and the width/length ratio of the central incisors showed no significant difference between the two groups (P>0.05). The width ratios of canines/lateral incisors and lateral incisors/central incisors measured on the 2D intraoral photographs (0.72±0.06, 0.85±0.11) were significantly smaller than those measured in the frontal view of 3D digital models (0.75±0.06, 0.89±0.11) (t=-9.31, P<0.001; t=-6.58, P<0.001). Conclusions: There is a difference between 2D and 3D measurement results of teeth in the esthetic area and the magnitude of the difference varies with their position in the dental arch. When analyzing the measurement of the anterior teeth, it is necessary to choose the appropriate method according to the target tooth position.

Maxillary Canine Impaction: Assessing the Influence of Maxillary Anatomy Using Cone Beam Computed Tomography.

BACKGROUND The purpose of this study was to evaluate the anatomical characteristics of patients with unilateral impacted canine teeth compared to a control group. Cone beam computed tomography (CBCT) records were retrospectively analyzed. MATERIAL AND METHODS CBCT records of 64 patients with unilateral impacted canine teeth (57.8% female and 42.2% male) and 64 controls (59.4% female and 40.6% male) were retrospectively analyzed. On the CBCT images, intermolar width, arch length, arch perimeter, palatal width in the molar region at cementoenamel junction, palatal width in the molar region at the crest, palatal width in the molar region measured from mid-root level, nasal cavity width, and palatal depth were evaluated. RESULTS In the palatal width measurement from the mid-root variable, the measurement of labially positioned canines was significantly lower than the control group (P<0.05). In terms of intermolar width, the labial positioned impacted canines' values were lower than in the control group. There was a significant difference in terms of the perimeter variable and both palatinally and labially positioned impacted canines were significantly lower than in the control group (P<0.05). All parameters were compared according to sex, and measurements of male patients were significantly higher than in female patients (P<0.05). CONCLUSIONS A labially impacted canine was strongly linked to a decrease in mid-root palatal and intermolar widths. Additionally, impacted canines positioned both palatally and labially were found to result in a reduced arch perimeter. Moreover, male patients with impacted canines exhibited notably greater anatomical measurements compared to female patients.

Mandibular overdenture with a single implant in the canine region (c-SIMO): a feasibility study.

OBJECTIVES: The aim of this multi-center pilot study was to assess the viability and feasibility of a novel treatment concept - the canine-positioned single implant mandibular overdenture (c-SIMO), with the single implant placed on the patient's preferred chewing side instead of the midline. MATERIALS AND METHODS: Participants received a single implant in the canine region of their preferred chewing side, based on an Asymmetry Index observed during mastication. The pre-existing mandibular denture was transformed into a c-SIMO on a spherical attachment. The primary outcome was oral health-related quality of life (OHRQoL), measured with GOHAI and OHIP-EDENT. Secondary outcomes included denture satisfaction index (DSI), chewing efficiency (CE), maximum bite force (MBF), implant survival and success, and prosthetic maintenance. Data analysis included descriptive statistics and bivariate comparison tests. RESULTS: Fifteen participants received the c-SIMO treatment (mean age: 69.9 ± 7.0). Implant success and survival rates were 100% at 1 year. Patient-reported outcome measures improved significantly compared to pre-treatment values (OHIP-EDENT: p = 0.001; DSI: p = 0.001; GOHAI: p = 0.002). Masticatory outcomes also improved significantly (CE: p = 0.001; overall MBF: p = 0.005). Post-implant, MBF was significantly higher in the ipsilateral side compared to the contralateral side at 2 weeks (p = 0.019) and 3 months (p = 0.015), but no longer at T3 (p = 0.730). Common prosthodontic events included denture base adjustments (n = 17) and matrix activation (n = 9). CONCLUSIONS: This pilot study concludes that c-SIMO is a promising treatment option, and a potential alternative to the single midline implant overdenture. CLINICAL RELEVANCE: The novel treatment concept of a canine-positioned single implant mandibular overdenture could be a viable treatment alternative to the midline positioning.

A novel acrylic orthodontic device for treatment of linguoverted mandibular canine teeth in small dogs.

Linguoverted mandibular canine teeth (LMC) is a common malocclusion in dogs. Several inclined bite-plane techniques using acrylic resin have been introduced to correct LMC in dogs. Although these techniques have suggested modifications to overcome shortcomings, there are still limitations; e.g., high technical sensitivity, as the viscous acrylic resin must still be fabricated in the oral cavity. The authors developed a novel method for small-breed dogs that uses a doughy acrylic resin form to achieve an easy intraoral design and extraoral fabrication. Eight small-breed dogs were presented to evaluate and treat malocclusion causing palatal trauma. First, a Class-1 malocclusion with linguoversion of the mandibular canine teeth (6 dogs with unilateral LMC and 2 dogs with bilateral) was diagnosed based on oral examination. Dogs were treated with the new method using a doughy acrylic resin form for 6 to 7 wk and had posttreatment follow-up 1 y after the procedure. All treated canine teeth were in correct positions 1 y after the appliances were removed. Key clinical message: The authors believe that the new method using a doughy acrylic resin form could be a good alternative for veterinarians to use when treating LMC.

Un nouveau dispositif orthodontique en acrylique pour le traitement des canines mandibulaires linguoverties chez les petits chiens. Les canines mandibulaires linguoverties (LMC) sont une malocclusion courante chez le chien. Plusieurs techniques de plan de morsure incliné utilisant de la résine acrylique ont été introduites pour corriger la LMC chez le chien. Bien que ces techniques aient suggéré des modifications pour surmonter les lacunes, elles présentent encore des limites; par exemple, une sensibilité technique élevée, car la résine acrylique visqueuse doit encore être fabriquée dans la cavité buccale. Les auteurs ont développé une nouvelle méthode pour les chiens de petite race qui utilise une forme pâteuse de résine acrylique pour obtenir une conception intra-orale et une fabrication extra-orale faciles. Huit chiens de petite race ont été présentés pour évaluer et traiter une malocclusion provoquant un traumatisme palatin. Tout d'abord, une malocclusion de classe 1 avec linguoversion des canines mandibulaires (6 chiens avec LMC unilatérale et 2 chiens avec bilatérale) a été diagnostiquée sur la base d'un examen oral. Les chiens ont été traités avec la nouvelle méthode en utilisant une forme pâteuse de résine acrylique pendant 6 à 7 semaines et ont fait l'objet d'un suivi post-traitement 1 an après la procédure. Toutes les canines traitées étaient dans la bonne position un an après le retrait des appareils.Message clinique clé:Les auteurs estiment que la nouvelle méthode utilisant une forme pâteuse de résine acrylique pourrait être une bonne alternative que les vétérinaires pourraient utiliser lors du traitement du LMC.(Traduit par Dr Serge Messier).

Cone beam computed tomography assessment of maxillary anterior teeth cervix dimensions in healthy adults for optimal anatomic healing abutments.

OBJECTIVES: The abutments produced with circular symmetry failed to accurately replicate the natural teeth's cervical shapes. The purpose of this study was to measure cervical cross-sections of maxillary anterior teeth using cone beam computed tomography (CBCT) images to design anatomic healing abutments. MATERIALS AND METHODS: CBCT data of 61 patients were analyzed using Ez3D Plus software. Measurements were taken at the cemento-enamel junction (CEJ) and 1 mm coronal to CEJ for maxillary central incisors, lateral incisors, and canines. Various parameters, including area, perimeter, and eight line segments in the distal (a), disto-palatal (b), palatal (c), mesio-palatal (d), mesial (e), mesio-labial (f), labial (g), and disto-labial (h) directions, were used to describe dental neck contours. The ratios (f/b and h/d) were analyzed, and differences based on sex and dental arch morphology were explored. RESULTS: Significant differences were found in area and perimeter between males and females, but not in f/b and h/d ratios. Differences in the f/b ratio were observed among dental arch morphologies for maxillary central incisors, lateral incisors, and canines. CONCLUSIONS: CBCT measurements of cervical cross-sections provide more accurate data for designing anatomic healing abutments. The fabrication of anatomical healing abutments needs to consider the influence of gender on cervical size and to explore the potential effect of arch shape on cervical morphology. CLINICAL SIGNIFICANCE: The novel method provides detailed measurements for the description of dental cervical contours for patients with bilateral homonymous teeth missing. The measurements of this study could be utilized to design more accurate anatomic healing abutments to create desired morphology of peri-implant soft tissue.