Electrochemical Detection of Nucleic Acids Using Three-Dimensional Graphene Screen-Printed Electrodes.

Electrochemical approaches, along with miniaturization of electrodes, are increasingly being employed to detect and quantify nucleic acid biomarkers. Miniaturization of the electrodes is achieved through the use of screen-printed electrodes (SPEs), which consist of one to a few dozen sets of electrodes, or by utilizing printed circuit boards. Electrode materials used in SPEs include glassy carbon (Chiang H-C, Wang Y, Zhang Q, Levon K, Biosensors (Basel) 9:2-11, 2019), platinum, carbon, and graphene (Cheng FF, He TT, Miao HT, Shi JJ, Jiang LP, Zhu JJ, ACS Appl Mater Interfaces 7:2979-2985, 2015). There are numerous modifications to the electrode surfaces as well (Cheng FF, He TT, Miao HT, Shi JJ, Jiang LP, Zhu JJ, ACS Appl Mater Interfaces 7:2979-2985, 2015). These approaches offer distinct advantages, primarily due to their demonstrated superior limit of detection without amplification. Using the SPEs and potentiostats, we can detect cells, proteins, DNA, and RNA concentrations in the nanomolar (nM) to attomolar (aM) range. The focus of this chapter is to describe the basic approach adopted for the use of SPEs for nucleic acid measurement.

Phylogenetic relationships of the Mangrove Hummingbird, "Amazilia" boucardi (Apodiformes: Trochilidae) of Costa Rica / Relaciones filogenéticas del Colibrí manglero "Amazilia" boucardi (Apodiformes: Trochilidae) de Costa Rica

Abstract Introduction: A recent revision of the generic classification of the Trochilidae based on DNA sequences revealed many inconsistencies with the current generic classification, largely based on plumage characters subject to homoplasy, especially in the Trochilini, the largest tribe. A thorough generic reorganization brought the classification into accord with the phylogeny, but due to lack of genetic data, two species remained unclassified. One of these was the Mangrove Hummingbird, "Amazilia" boucardi, endemic to Costa Rica and included in the IUCN red list of threatened species. Objective: To obtain molecular evidence to clarify the generic relationships of "A." boucardi. Methods: We isolated DNA from tissues of this species and amplified 4 nuclear and 4 mitochondrial fragments and compared these with homologous fragments from 56 species in the Trochilini, constructing phylogenetic trees with maximum likelihood and Bayesian methods. Results: Our phylogenetic analyses confirmed the placement of boucardi in the Trochilini and definitely excluded it from Amazilia but placed it with high confidence in the genus Chrysuronia Bonaparte, 1850, within which its closest relative is C. coeruleogularis, which also inhabits mangroves. Conclusions: Our genetic data based on nuclear and mitochondrial regions clearly indicate the relationship of A. boucardi and L. coeruleogularis. Moreover, it is also supported by their habitat distribution in the mangroves of the Pacific coast of Costa Rica and Western Panama. Therefore, we suggested to exclude A. boucardi as "incertae sedis".

Resumen Introducción: Una revisión reciente de la clasificación de la familia Trochilidae con base en secuencias de ADN demostró muchas incongruencias con la clasificación genérica previa, que había sido hecho con base en caracteres del plumaje muy sujetos a homoplasia, especialmente en la tribu más grande, Trochillini. Una reorganización de los géneros logró llevar su clasificación genérica a la concordancia con la filogenia, pero debido a la ausencia de datos genéticos, dos especies permanecieron sin clasificar. Una de estas fue el colibrí de manglar Amazilia boucardi, una especie endémica de Costa Rica, considerada como amenazada en la lista roja de la UICN. Objetivo: Obtener evidencia molecular para esclarecer las relaciones genéricas de A. boucardi. Métodos: Se aisló ADN de tejidos de esta especie y se amplificaron 4 fragmentos de ADN del núcleo y 5 de la mitocondria, y se compararon con fragmentos homólogos de 56 especies en la tribu Trochillini, generando árboles filogenéticos con métodos de máxima verosimilitud y bayesiano. Resultados: Los análisis filogénticos obtenidos confirmaron la ubicación de boucardi en Trochilini y definitivamente la excluyó del género Amazilia, pero la ubicó con un alto grado de confianza en el género Chrysuronia Bonaparte, 1850, dentro los cuales su pariente más cercano es C. coeruleogularis, que también habita manglares. Conclusiones: Nuestros datos genéticos basados en regiones nucleares y mitocondriales indican claramente la relación entre A. boucardi and L. coeruleogularis. Es más, lo anterior se sustenta por su distribución en los manglares de la costa Pacífica de Costa Rica y oeste de Panamá. Por lo tanto, sugerimos excluir a A. boucardi como "incertae sedis".

Visualization of Biomolecular Radiation Damage at the Single-Particle Level Using Lanthanide-Sensitized DNA Origami.

Precise monitoring of biomolecular radiation damage is crucial for understanding X-ray-induced cell injury and improving the accuracy of clinical radiotherapy. We present the design and performance of lanthanide-DNA-origami nanodosimeters for directly visualizing radiation damage at the single-particle level. Lanthanide ions (Tb3+ or Eu3+) coordinated with DNA origami nanosensors enhance the sensitivity of X-ray irradiation. Atomic force microscopy (AFM) revealed morphological changes in Eu3+-sensitized DNA origami upon X-ray irradiation, indicating damage caused by ionization-generated electrons and free radicals. We further demonstrated the practical applicability of Eu3+-DNA-origami integrated chips in precisely monitoring radiation-mediated cancer radiotherapy. Quantitative results showed consistent trends with flow cytometry and histological examination under comparable X-ray irradiation doses, providing an affordable and user-friendly visualization tool for preclinical applications. These findings provide new insights into the impact of heavy metals on radiation-induced biomolecular damage and pave the way for future research in developing nanoscale radiation sensors for precise clinical radiography.

Development of Lasing Silica Microsphere for High-Speed DNA Molecular Detection.

Laser and molecular detection techniques that have been used to overcome the limitations of fluorescent DNA labeling have presented new challenges. To address some of these challenges, we developed a DNA laser that uses a solid-state silica microsphere as a ring resonator and a site for DNA-binding reactions, as well as a platform to detect and sequence target DNA molecules. We detected target DNA using laser emission from a DNA-labeling dye and a developed solid-state silica microsphere ring resonator. The microsphere was sensitive; a single base mismatch in the DNA resulted in the absence of an optical signal. As each individual microsphere can be utilized as a parallel DNA analysis chamber, this optical digital detection scheme allows for high-throughput and rapid analysis. More importantly, the solid-state DNA laser is free from deformation, which guarantees stable lasing characteristics, and can be manipulated freely outside the solution. Thus, this promising advanced DNA laser scheme can be implemented on platforms other than optofluidic chips.

Digital One-Step Competitive Detection of a Small Molecule in Synthetic and Environmental Waters.

Optical methods for single-molecule analysis hold the promise of accurate, sensitive, and rapid detection of target molecules. Here, we demonstrate the efficiency of such an approach for the competitive detection of small molecules in water. Our biosensing method is based on a combination of a single-DNA biochip for the parallelization of tethered particle motion real-time measurements with antibodies and modified targets as molecular competitors. The antibodies are coupled to the particles tethered to the surface by a long DNA bearing in its middle the molecular competitor bound to the antibodies. Competitive target binding leads to a detectable conformational change of the DNA tethers from looped to unlooped in proportions related to the target concentration. We thus managed to detect fluorescein, chosen as a model of a target molecule, in freshwater of various qualities, from solutions prepared with ultrapure water to more complex matrices such as river water and wastewater treatment plant effluent samples. Similar dose-response curves were obtained under these various conditions in a wide range of concentrations from nanomolar to micromolar with a limit of detection around 2 nM.

The distribution of the extrachromosomal DNA molecules in early lung cancer.

Lung cancer (LC) is a highly lethal cancer worldwide. Research on the distribution and nature of extrachromosomal DNA molecules (EcDNAm) in early LC is scarce. In this study, after removing linear DNA and mitochondrial circular DNA, EcDNAm were extracted from two paired LC tissue samples and amplified using rolling circle amplification. High throughput extrachromosomal DNA (EcDNA) or RNA sequencing and bioinformatics analysis were subsequently utilized to explore the distribution and nature of the EcDNAm. Additionally, to elucidate the role of oncogenes with large EcDNAm sizes, gene ontology and Kyoto Encyclopedia of Genes and Genomes pathway analyses were performed. The RNA sequencing results revealed significant differences in certain genes between tumors and corresponding normal samples. At the same time, slight distinctions were observed between relapsed and non-relapsed tumor samples. The nature of the EcDNAm was compared between LC samples and matched normal samples. There was a tendency for the number of EcDNAm with longer size (EcDNA) and its containing driver oncogenes to be higher in cancer samples. Enrichment analysis of the cancer samples revealed enrichment in biological processes, such as positive regulation of protein localization, axon development, and in-utero embryonic development. This study highlights the universal distribution and characteristics of EcDNAm in early LC. Moreover, our work fills the investigation of the EcDNAm gap and future studies should focus on the application of EcDNA as a potential biomarker in patients with early LC.

'Low' LRs obtained from DNA mixtures: On calibration and discrimination performance of probabilistic genotyping software.

The validity of a probabilistic genotyping (PG) system is typically demonstrated by following international guidelines for the developmental and internal validation of PG software. These guidelines mainly focus on discriminatory power. Very few studies have reported with metrics that depend on calibration of likelihood ratio (LR) systems. In this study, discriminatory power as well as various calibration metrics, such as Empirical Cross-Entropy (ECE) plots, pool adjacent violator (PAV) plots, log likelihood ratio cost (Cllr and Cllrcal), fiducial calibration discrepancy plots, and Turing' expectation were examined using the publicly-available PROVEDIt dataset. The aim was to gain deeper insight into the performance of a variety of PG software in the 'lower' LR ranges (∼LR 1-10,000), with focus on DNAStatistX and EuroForMix which use maximum likelihood estimation (MLE). This may be a driving force for the end users to reconsider current LR thresholds for reporting. In previous studies, overstated 'low' LRs were observed for these PG software. However, applying (arbitrarily) high LR thresholds for reporting wastes relevant evidential value. This study demonstrates, based on calibration performance, that previously reported LR thresholds can be lowered or even discarded. Considering LRs >1, there was no evidence for miscalibration performance above LR ∼1000 when using Fst 0.01. Below this LR value, miscalibration was observed. Calibration performance generally improved with the use of Fst 0.03, but the extent of this was dependent on the dataset: results ranged from miscalibration up to LR ∼100 to no evidence of miscalibration alike PG software using different methods to model peak height, HMC and STRmix. This study demonstrates that practitioners using MLE-based models should be careful when low LR ranges are reported, though applying arbitrarily high LR thresholds is discouraged. This study also highlights various calibration metrics that are useful in understanding the performance of a PG system.

Where did it go? A study of DNA transfer in a social setting.

The sensitivity of DNA analysis has progressed to the point that trace levels of DNA, originating from only a few cells, can generate informative profiles. This means that virtually any item or surface can be sampled with a reasonable chance of obtaining a DNA profile. As the presence of DNA does not suggest how it was deposited, questions are often raised as to how the DNA came to be at a particular location and the activity that led to its deposition. Therefore, understanding different modes of DNA deposition, reflective of realistic forensic casework situations, is critical for proper evaluation of DNA results in court. This study aimed to follow the movements of DNA to and from individuals and common household surfaces in a residential premises, while socially interacting. This took place over an hour and involved four participants, with known shedder status, designated as visitors (a male and a female) and hosts (a male and a female), who engaged in the activity of playing a board game while being served food. During the study, the participants were instructed to use the toilet on a single occasion to assess the transfer of DNA to new and unused underwear that was provided. All contacts made by the participants in the dining room and kitchen were video recorded to follow the movements of DNA. Samples were collected based on the history of contact, which included hands, fingernails and penile swabs. Direct contacts resulted in detectable transfer (LR > 1) in 87 % (87/100) of the non-intimate samples and clothing. For surfaces touched by multiple participants, DNA from the person who made the last contact was not always detectable. The duration and number of contacts did not significantly affect the detection of the person contacting the item. On the other hand, presence of background DNA and participant's shedder status appear to play an important role. Further, unknown contributors were detected in the majority of samples. Finally, indirect transfer was observed on a number of occasions including co-habiting partners of guests who were not present at the study location. The results of this study may assist with decision making for exhibit selection or targeting areas for sampling within the home environment. Our findings can also be used in conjunction with previous literature to develop activity-level evaluations in such situations where the source of the DNA is conceded, but the mode of deposition is disputed.

Transfer and recovery of DNA and metal particles: A proof-of-concept application of a parallel strategy by DNA and environmental scanning electron microscopy analysis.

According to the principle of Locard "Every contact leaves a trace", when touching a surface, a bi-directional transfer of self and non-self-DNA residing on the hands and touched objects can occur. Metals are commonly encountered in forensic evidence and, during hand contact with these surfaces, a transfer of metal particles could occur together with the transfer of human DNA. This study proposes a proof-concept approach for the original detection of metal particles and touch DNA to track the activity performed by a donor and particularly to assess the metallic substrate touched before the contact with a subsequent surface. To this scope, a scenario of contact events was simulated by three volunteers, who participated in fingerprint deposition firstly on copper and then on plastic and glass surfaces. Twenty-four stubs were collected on the hands of volunteers and the secondary surfaces and then analyzed by environmental scanning electron microscopy (ESEM). DNA was quantified only from copper and plastic surfaces. Ten additional volunteers followed the same protocol of deposition on copper and then on plastic surfaces to evaluate DNA transfer only. On 20 touch DNA samples, the copper surface yielded significantly lower DNA amounts, ranging from 0.001 to 0.129 ng/µl, compared to the secondary touched plastic surface, ranging from 0.007 to 0.362 ng/µl. ESEM-EDS analysis showed that copper particles could be abundantly detected on the hands of the volunteers after contact with the copper surface. Particles containing silicates with copper were shown on plastic, while they were only found in 1/3 of samples on glass. Our proof-of-concept study has shown that ESEM-EDS analysis has the potential to detect copper particles transferred to the hands of volunteers during contact with a copper metallic surface and deposited on secondarily touched items. The results suggest that this original ESEM-DNA parallel approach could potentially allow the tracking of DNA transfer and metal particles at a crime scene, although this represents only a first step and further research on a wider casuistry could help to address the interpretation of results given activity level propositions.

A comparison of likelihood ratios calculated from surface DNA mixtures using MPS and CE Technologies.

This study evaluates the performance of analysing surface DNA samples using massively parallel sequencing (MPS) compared to traditional capillary electrophoresis (CE). A total of 30 samples were collected from various surfaces in an office environment and were analysed with CE and MPS. These were compared against 60 reference samples (office inhabitants). To identify contributors, likelihood ratios (LRs) were calculated for MPS and CE data using the probabilistic genotyping software MPSproto and EuroForMix respectively. Although a higher number of sequences/peaks were observed per DNA profile in MPS compared to CE, LR values were found to be lower for MPS data formats. This might be the result of the increased complexity of MPS data, along with a possible elevation of unknown alleles and/or artefacts. The study highlights avenues for improving MPS data quality and analysis to facilitate more robust interpretation of challenging casework-like samples.

DNA concentrations in amniotic fluid according to gestational age and fetal sex: data from 2573 samples.

PURPOSE: In some cases of prenatal genetic testing, an ample amount of fetal DNA is needed, to allow for parallel testing (conducting several genetic tests simultaneously). This study investigated the association between amniotic fluid DNA concentration and various factors. We aimed to define the required amount of amniotic fluid to be extracted in amniocentesis, to allow parallel testing throughout gestational weeks. METHODS: DNA concentration was analyzed from amniocentesis samples taken during the years 2016-2022. Sex association was also analyzed in postnatal whole blood samples from a separate cohort. Theoretical minimum volume of amniotic fluid needed to ensure enough DNA for chromosomal microarray analysis and exome sequencing was calculated. RESULTS: We focused our analysis on 2573 samples, which were taken during weeks 17-23 and 30-35. DNA concentrations increased from weeks 17 to 21, with relatively stable concentrations thereafter. Significantly higher DNA concentrations were seen in pregnancies of female fetuses. DNA concentrations in postnatal whole blood samples did not show this association. Across most weeks, the volume needed to extract 2 µg of DNA from 95% of the samples was about 34 ml. CONCLUSION: DNA concentrations in amniotic fluid vary according to gestational age and are higher in pregnancies of female fetuses. This should be considered when determining the volume of fluid extracted and the timing of amniocentesis, with greater volumes needed in earlier stages of pregnancy.

A method to measure molecular hybridization.

Fluorescence-based oligonucleotide probes have a great importance in research of molecular interactions. Molecular beacons (MBs) are special case of fluorescent probes that form a stem-loop shape, bringing together a fluorophore and quencher, thus emitting fluorescence only when hybridized to a complementary target. Here we describe a new method for the quantitation of MB hybridization based on the measurement of changes in free energy instead of the fluorescence intensity. The MB energy state can be measured by micro-fluorescence detection. The approach allowed to determine hybridization energy of the MB with target nucleotide directly from fluorescence spectra and distinguish the MB in unfolded and hybridized states. Moreover, the method enabled us to discriminate between DNA duplexes with perfect complementarity or a single-nucleotide mismatch, based on the first direct experimental prove of enthalpy-entropy compensation.

Highly enhanced Hg2+ detection using optimized DNA and a double coffee ring effect-based SERS map.

Hg2+ is a highly toxic heavy metal ion that poses serious risks to human health and the environment. Due to its tendency to accumulate, it can easily enter the human body through the food chain, making it crucial to develop detection sensors that mimic real environmental conditions. To achieve this, our study employed a surface-enhanced Raman scattering (SERS) sensor using two strategies. First, we designed a highly selective probe by optimizing the probe and reporter DNA strands to bind Hg2+ within a thymine-thymine mismatch. Second, we used the double coffee ring effect to concentrate the optimized probe DNA. These two strategies greatly enhanced the SERS signal, resulting in a sensor with exceptional sensitivity, a low detection limit of 208.71 fM, and superior selectivity for Hg2+. The practical application of the sensor was demonstrated by successfully detecting Hg2+ in drinking water, tap water, canned tuna, and tuna sashimi. Additionally, the experimental results were presented in a pizza-shaped SERS mapping image, allowing users to estimate Hg2+ concentrations through color, providing a user-friendly and intuitive method for data comprehension and analysis. Our study presents a promising approach for sensitive and reliable Hg2+ detection, with potential implications for environmental monitoring and food safety.

Target-Triggered Multiple-Polarity-Switchable Multiplexed Photoelectrochemical Platform.

Convenient and accurate quantification of disease-relevant multitargets is essential for community disease screening. However, in the field of photoelectrochemical (PEC) sensors for multisubstance detection, research on the continuous detection of multiple targets using a polarity-switching mode is scarce. In this study, a multiplexed PEC bioassay was developed based on a target-triggered "anodic-cathodic-anodic" multiple-polarity-switchable mode. Employing miRNA-21 and miRNA-141 as model analytes, the photosensitive material combinations of Cu2O/gold nanoparticles (AuNPs)/TiO2 and CdS/AuNPs/TiO2 were successively formed through the specific binding of different whisker branches of Whisker-DNA to Cu2O-H1 and the CdS-tripod DNA ring, respectively. This process reverses the photocurrent polarity from anodic to cathodic and then back to anodic upon detecting different targets, resulting in the high-sensitivity quantification of various biological targets with reduced interference. To enhance the device's utility and affordability in community disease screening, integrating a capacitor and a multimeter-smartphone connection simplifies the assembly and reduces costs. In developing the PEC sensor, the device demonstrated linear detection ranges for miRNA-21 and miRNA-141 from 0.01 fM to 10 nM. Detection limits for miRNA-21 and miRNA-141 were established at 3.2 and 4.3 aM, respectively. The innovative target-triggered multiple-polarity-switchable mode offers adaptability for other multitarget detections by simply modifying the structure of the whisker branches and the combination of photosensitive materials.

High-performance electrolyte-gated amorphous InGaZnO field-effect transistor for label-free DNA sensing.

Accurate, convenient, label-free, and cost-effective biomolecules detection platforms are currently in high demand. In this study, we showcased the utilization of electrolyte-gated InGaZnO field-effect transistors (IGZO FETs) featuring a large on-off current ratio of over 106 and a low subthreshold slope of 78.5 mV/dec. In the DNA biosensor, the modification of target DNA changed the effective gate voltage of IGZO FETs, enabling an impressive low detection limit of 0.1 pM and a wide linear detection range from 0.1 pM to 1 µM. This label-free detection method also exhibits high selectivity, allowing for the discrimination of single-base mismatch. Furthermore, the reuse of gate electrodes and channel films offers cost-saving benefits and simplifies device fabrication processes. The electrolyte-gated IGZO FET biosensor presented in this study shows great promise for achieving low-cost and highly sensitive detection of various biomolecules.

Assessment of DNA quality for whole genome library preparation.

In recent years, more sophisticated DNA technologies for genotyping have enabled considerable progress in various fields such as clinical genetics, archaeogenetics and forensic genetics. DNA samples previously rejected as too challenging to analyze due to low amounts of degraded DNA can now provide useful information. To increase the chances of success with the new methodologies, it is crucial to know the fragment size of the template DNA molecules, and whether the DNA in a sample is mostly single or double stranded. With this knowledge, an appropriate library preparation method can be chosen, and the DNA shearing parameters of the protocol can be adjusted to the DNA fragment size in the sample. In this study, we first developed and evaluated a user-friendly fluorometry-based protocol for estimation of DNA strandedness. We also evaluated different capillary electrophoresis methods for estimation of DNA fragmentation levels. Next, we applied the developed methodologies to a broad variety of DNA samples processed with different DNA extraction protocols. Our findings show that both the applied DNA extraction method and the sample type affect the DNA strandedness and fragmentation. The established protocols and the gained knowledge will be applicable for future sequencing-based high-density SNP genotyping in various fields.

Enzyme-free fluorescent DNA detection based on nucleic acid-templated click reaction via controllable synthesis of Cu2O as heterogeneous nanocatalyst.

In the field of nucleic acid amplification assays, developing enzyme-free, easy-to-use, and highly sensitive amplification approaches remains a challenge. In this work, we synthesized a heterogeneous Cu2O nanocatalyst (hnCu2O) with different particle sizes and shapes, which was used for developing enzyme- and label-free nucleic acid amplification methods based on the nucleic acid-templated azide-alkyne cycloaddition (AAC) reaction catalyzed by hnCu2O. The hnCu2O exhibited size- and shape-dependent catalytic activity, with smaller sizes and spherical-like shapes exhibiting superior activity. Spherical-like hnCu2O (61 ± 8 nm) not only achieved a ligation yield of up to 84.2 ± 3.9 % in 3 min but also exhibited faster kinetics in the nucleic acid-templated hnCu2O-catalyzed AAC reaction, with a high reaction rate of 0.65 min-1 and a half-life of 1.07 ± 0.09 min. Based on this result, we developed nucleic acid-templated click ligation linear amplification reaction (NA-CLLAR) and nucleic acid-templated click ligation exponential amplification reaction (NA-CLEAR) approach. By combining the recognition (complementary to the target sequence) and signal output (split G-quadruplex sequence) elements into a DNA probe, the NA-CLLAR and NA-CLEAR fluorescence assays achieved highly specific detection of target nucleic acids, with a detection limit of 2.8 aM based on G-quadruplex-enhanced fluorescence. This work is a valuable reference and will inspire researchers to design enzyme-free nucleic acid signal amplification strategies by developing different types of Cu(I) catalysts with improved catalytic activity.

Stochastic bipedal dual-DNA walkers for fast and sensitive detection of apurinic/apyrimidinic endonuclease1 and inhibitor screening.

DNA walkers have emerged as a powerful tool in various biosensors, enabling the detection of low-abundance analytes with their precise programmability and efficient signal amplification capacity. However, many existing approaches are hampered by limited reaction kinetics. Herein, we designed a stochastic bipedal dual-DNA walkers (SBDW) that can traverse at high speed on AuNP-based three-dimensional (3D) tracks powered by Exo III. The SBDW exhibited superior reaction kinetics and are up to least 2.25 times faster than traditional DNA walkers, reaching a plateau within 40 min. This advancement allows for rapid and highly sensitive fluorescence detection of a significant base excision repair enzyme of APE1 with a detection limit of 0.001 U/mL. In comparison to traditional DNA walkers, this platform enables highly sensitive and specific APE1 assays in cell lysate and facilitates rapid and accurate screening of APE1 inhibitors. Given its rapid, sensitive, specific, and reliable analysis features, the strategy shows great promise in drug discovery and clinical diagnosis.

Toothpick DNA extraction combined with handheld LAMP microfluidic platform for simple and rapid meat authentication.

Adulteration of meat is a global issue, necessitating rapid, inexpensive, and simple on-site testing methods. Therefore, the present study aimed to develop a one-minute toothpick-based DNA extraction method, a handheld microfluidic chip, and a smartphone-controlled portable analyzer for detecting multiple meat adulterations. A toothpick was inserted into the meat to promote DNA release and adsorption. Furthermore, a handheld microfluidic chip was designed for DNA elution on toothpicks and fluid distribution. Finally, a smartphone-actuated portable analyzer was developed to function as a heater, signal detector, and result reader. The portable device comprises a microcontroller, a fluorescence detection module, a step scanning unit, and a heating module. The proposed device is portable, and the app is user-friendly. This simple design, easy operation, and fast-response system could rapidly detect as little as 1% of simulated adulterated samples (following UK standards) within 40 min at a cost of less than USD 1 per test.