[The use of fixed expanders with orthodontic miniscrews support in children with mesial occlusion]. / Ispol'zovanie nes"emnykh rasshiritelei s vnutrikostnoi oporoi u detei s mezial'noi okklyuziei.

OBJECTIVE: Prevention of the development of pronounced skeletal abnormalities in patients with mesial occlusion. MATERIALS AND METHODS: Biometric analysis of control and diagnostic models of dentition was performed in 60 patients with dental anomalies before and after treatment in 3 mutually perpendicular planes to identify violations in the formation of dental arches by sagittal and transversal dimensions, and alveolar processes - by vertical dimensions (methods of A. Pont, G. Korkhaus). Measurements of 23 parameters of TRG and sections of CBCT were carried out using the modified Nad-Ars technique with analysis of skeletal parameters before and after treatment. Treatment was carried out using dilators for the upper jaw in combination with a facial mask and further dynamic observation using active retention devices. RESULTS: The results of treatment showed an increase in the length of the anterior segment of the upper dental arch by 2.8±0.55 mm (p<0.05 mm); expansion in the area of temporary molars by 2.85±0.65 mm (p<0.05); in the area of permanent molars by 2.75±0.55 mm (p<0.05); in the area of the apical basis of HF by 3.82±0.45 mm (p<0.05). The length of the lower dental arch in the anterior segment has not changed. Analysis of TRG parameters showed a significant increase in the values of

Superimposition of virtual models using palatal rugae and maximum habitual intercuspation.

INTRODUCTION: The superimposition of 3 dimensions (3D) digital models has been increasingly used for evaluating dental changes resulting from orthodontic treatment, and different superimposition techniques have been described. Although the maxilla has areas with greater stability for superimposition, such as the palatal rugae, there is still no reliable method for superimposing models of the lower arch. OBJECTIVE: Therefore, this article aims to describe a technique for superimposing virtual models. METHODS: To evaluate pre- and post-orthodontic treatment changes, the Geomagic Qualify 2013 software (3D Systems®, Rock Hill, South Carolina, USA) was used, with reference points in the maxilla, including the rugae and a reference area in the palate and midpalatal raphe. The lower arch was superimposed using the maximum habitual intercuspation (MHI) model as reference. RESULTS AND CONCLUSION: 3D models superimposition using palatal rugae and MHI occlusion seems to offer satisfactory results in the interpretation of clinical changes at different follow-up moments in terms of development and/or orthodontic treatment.

Comparative cephalometric study of the airways between different ethnic groups with normal occlusion.

OBJECTIVE: This study aimed to compare the nasopharynx and oropharynx airway dimensions of Caucasians, Blacks, Japanese, Japanese Brazilians, and Black Caucasians. METHODS: A sample of 216 lateral radiographs of untreated young Brazilian subjects (mean age of 12.94 years; SD 0.88) were divided into five groups: Black Caucasian, Black, Caucasian, Japanese, and Japanese Brazilian. Lateral radiographs were used to measure the oropharynx (from the midpoint on the soft palate to the closest point on the anterior pharyngeal wall) and the nasopharynx (from the intersection of the posterior border of the tongue and the inferior border of the mandible to the closest point on the posterior pharyngeal wall). Analyses of variance (ANOVA) and Tukey's test were performed (p< 0.05). RESULTS: The linear dimension of the oropharynx was similar among the different ethnic groups. Caucasian individuals presented a significantly greater linear dimension of the nasopharynx than Black Caucasian and Black individuals. CONCLUSIONS: All the groups had similar buccopharyngeal values. However, Caucasian individuals had significantly higher values when compared to Black Caucasians and Black individuals.

Occlusal considerations in maintaining health of implants and their restorations.

Dental implants are a regular feature in daily clinical practice and there is a need to undertake routine assessment and maintenance of implants and their restorations on par with that provided for natural teeth. Occlusal checks form an important part of the maintenance regime for preserving the integrity of implants, their restorations, and health of the peri-implant tissues. Implant restorations are subjected to the full characteristics and magnitude of occlusal forces, including those associated with parafunction. Compared with the periodontal ligament around teeth, the biophysical response to occlusal forces of osseointegration is different through the more rigid link of implant to bone and reduced proprioception. Risks attributable to occlusal forces primarily affect implant restorations and they are elevated in the presence of bruxism. The occlusal guidelines recommended by the literature are aimed at reducing these risks and regular assessment and maintenance of the occlusion is essential. A four-step sequence is presented to ensure that the annual occlusal checks include the patient's input and evaluation of restoration integrity, occlusal scheme, additional protection, and spatial changes.

What is occlusion? Part 2.

Some dentists choose to ignore the subject of occlusion, while others propose a set of doctrinal rules. It is of little wonder therefore that it can become a source of confusion and even controversy. This series of two papers aims, firstly, to answer the very simple question of 'what is occlusion?'. It will put occlusion into the context of the articulatory system because that is the bio-mechanical environment where the majority of dentists do their work. The concept of jaw relation will also be discussed but within the context of this locomotive system. Ideal occlusion will be described but only after answering the question: for whom or what might an occlusion be considered ideal? Although, in the book of which this is the first chapter, he presents what has worked for him during many years as a general dental practitioner, university lecturer and specialist in restorative dentistry, he has tried not to be didactic because he feels that, in a profession, there are no right answers, only the right questions.

A study of correlations between cephalometric measurements in Koreans with normal occlusion by network analysis.

Analyzing the correlation between cephalometric measurements is important for improving our understanding of the anatomy in the oral and maxillofacial region. To minimize bias resulting from the design of the input data and to establish a reference for malocclusion research, the aims of this study were to construct the input set by integrating nine cephalometric analyses and to study the correlation structure of cephalometric variables in Korean adults with normal occlusion. To analyze the complex correlation structure among 65 cephalometric variables, which were based on nine classical cephalometric analyses, network analysis was applied to data obtained from 735 adults (368 males, 367 females) aged 18-25 years with normal occlusion. The structure was better revealed through weighted network analysis and minimum spanning tree. Network analysis revealed cephalometric variable clusters and the inter- and intra-correlation structure. Some metrics were divided based on their geometric interpretation rather than their clinical significance. It was confirmed that various classical cephalometric analyses primarily focus on investigating nine anatomical features. Investigating the correlation between cephalometric variables through network analysis can significantly enhance our understanding of the anatomical characteristics in the oral and maxillofacial region, which is a crucial step in studying malocclusion using artificial intelligence.

Occlusal contact changes in patients treated with clear aligners: A retrospective evaluation using digital dental models.

INTRODUCTION: This study used digital intraoral scans to evaluate how clear aligner treatment affects occlusal contacts and to determine the influence of sex and age on contact changes. Results were compared with contact changes that occur during fixed appliance therapy. METHODS: Patients included in this study were treated in a University setting and private practice. Inclusion criteria were a Class I malocclusion treated nonextraction with clear aligners and the presence of pretreatment and posttreatment digital intraoral scans. Scans were imported into specialized software, and occlusal contacts were analyzed. The effects of age and sex on contact changes during clear aligner treatment were determined. Changes in occlusal contacts were compared with changes that occur during nonextraction treatment of patients with a Class I relationship using fixed edgewise appliances. RESULTS: A total of 45 clear aligner patients fit the eligibility criteria. Clear aligner treatment reduced the percentage of tight, near, and approximating contacts, whereas the percentage of open and no contacts increased. These changes in occlusal contacts were greater for the older age group studied. Genderinfluenced occlusal contact changes in the anterior dentition only where the decrease in near contacts and increase in open contacts were greater for males. These results for patients treated with clear aligners were similar to those for patients treated with fixed appliances; both treatment modalities reduced close occlusal contacts at the time active treatment was completed. CONCLUSIONS: These results indicated that when clear aligners or fixed appliances are used to treat a Class I malocclusion, the resulting occlusion immediately after debonding is not as "tight" as it was at pretreatment.

Impact of clear aligner therapy on masticatory musculature and stomatognathic system: a systematic review conducted according to PRISMA guidelines and the Cochrane handbook for systematic reviews of interventions.

BACKGROUND: Clear aligner therapy has gained popularity as a minimally invasive orthodontic treatment option. However, its impact on the masticatory musculature and the stomatognathic system is an area of growing interest, as it involves the adjustment of occlusion and tooth movement. This systematic review aims to comprehensively assess and synthesise existing evidence regarding the influence of clear aligner therapy on the masticatory musculature and the stomatognathic system. METHODS: An exhaustive search was performed on electronic databases that adhered to PRISMA guidelines. Clinical studies that evaluated the impact of patients receiving aligner orthodontic treatment on the muscles of the mastication and stomatognathic systems were included. A standardised data extraction form was devised for relevant variables. Two reviewers extracted the data variables. ROB-2 was used for bias evaluation in the selected studies. RESULTS: A total of six studies met the inclusion criteria. The wearing of clear aligners significantly impacted the muscles of mastication. Muscle activity and discomfort showed a significant alteration in the initial days of appliance placement. but this observation was temporary, with no significant changes thereafter in subsequent follow-up. Bite force reduction was also noted. All the studies evaluated showed good methodological quality. CONCLUSION: The review found that aligned orthodontic treatment may have a variable impact on muscles of mastication, with a potential for initial exacerbation of symptoms followed by possible improvement. However, due to the limited number of studies and their heterogeneous nature, further robust research is recommended to fully understand the relationship between aligned orthodontic treatment and masticatory muscles.

Occlusion development after premature loss of deciduous anterior teeth: preliminary results of a 24-month prospective cohort study.

OBJECTIVE: This study aimed to evaluate occlusion development after premature loss or extraction of deciduous anterior teeth, by means of a prospective cohort study. METHODS: Fifteen infants and children aged 1 to 5 years old were longitudinally assessed (with loss or extraction of deciduous anterior teeth [n = 9], and without tooth losses [n = 6]). Photographs and dental casts at the baseline and after 24 months of follow-up were performed. Dental casts were scanned, and linear measurements were made on the digitalized models (missing tooth space, arch perimeter, arch length, arch width, intercanine length and intercanine width). The t-test was used for groups comparisons (α = 0.05). RESULTS: Individuals' mean age at baseline was 2.93 (± 1.18) years. No statistically significant differences were observed in the missing tooth space in the group with tooth loss during the 24 months of follow-up (p > 0.05). Arch perimeter, arch length, arch width, intercanine length and intercanine width did not show differences between the groups (p > 0.05). Qualitative photographic evaluation revealed other changes in the dental arches and occlusion, such as exfoliation and eruption of deciduous teeth, eruption of permanent teeth, self-correction or establishment of malocclusion, among others. CONCLUSION: The results suggest that the premature loss of deciduous anterior teeth does not affect the perimeter, length and width of the dental arches; however, other alterations that lead to malocclusion could be established.

Relationship between Body Posture Assessed by Dynamic Baropodometry and Dental Occlusion in Patients with and without Dental Pathology.

Body biomechanics and dental occlusion are related, but this interaction is not fully elucidated. The aim of this study was to investigate the association between body posture and occlusion in patients with and without dental pathology. A cross-sectional study was carried out with 29 patients divided into a control group and a group with pathology (malocclusions). Body posture was evaluated by dynamic baropodometry, analyzing parameters such as the line of gait and the anteroposterior and lateral position of the center of pressure (CoP). Occlusion was classified radiographically according to the sagittal skeletal relationship. Results showed significant differences in mean position phase line between groups (p = 0.01-0.02), with means of 115.85 ± 16.98 mm vs. 95.74 ± 24.47 mm (left side) and 109.03 ± 18.03 mm vs. 91.23 ± 20.80 mm (right side) for controls and pathologies, respectively. The effect size was large (Cohen's d 0.97 and 0.92). There were no differences in the anteroposterior (p = 0.38) or lateral (p = 0.78) position of the CoP. In gait analysis, significant differences were observed in left (548.89 ± 127.50 N vs. 360.15 ± 125.78 N, p < 0.001) and right (535.71 ± 131.57 N vs. 342.70 ± 108.40 N, p < 0.001) maximum heel strength between groups. The results suggest an association between body posture and occlusion, although further studies are needed to confirm this relationship. An integrated postural and occlusal approach could optimize the diagnosis and treatment of dental patients.

What is occlusion? Part 1.

Some dentists choose to ignore the subject of occlusion, while others propose a set of doctrinal rules. It is of little wonder therefore that it can become a source of confusion and even controversy. This series of two papers aims, firstly, to answer the very simple question of 'what is occlusion?'. It will put occlusion into the context of the articulatory system because that is the bio-mechanical environment where the majority of dentists do their work. The concept of jaw relation will also be discussed but within the context of this locomotive system. Ideal occlusion will be described but only after answering the question: for whom or what might an occlusion be considered ideal? Although, in the book of which this is the first chapter, he presents what has worked for him during many years as a general dental practitioner, university lecturer and specialist in restorative dentistry, he has tried not to be didactic because he feels that, in a profession, there are no right answers, only the right questions.

Does Maxillomandibular Fixation Technique Affect Occlusion Quality in Segmental LeFort I Osteotomy?

BACKGROUND: Segmental maxillary osteotomies require precise occlusal control due to variability in individual segment positioning. The role of maxillomandibular fixation (MMF) technique on occlusal control has not been validated. PURPOSE: The purpose is to measure and compare the accuracy of occlusal positioning among MMF techniques. STUDY DESIGN, SETTING, SAMPLE: This was a double-blinded in vitro study on experiment models to simulate a 3-piece LeFort I osteotomy. The models were constricted posteriorly and expanded using 3 different MMF techniques and compared to the unaltered baseline occlusion. Based on sample size calculation, 32 separate attempts were made for each MMF technique. PREDICTOR VARIABLE: The predictor variable was MMF technique (brackets, MMF screws, and embrasure wires). MAIN OUTCOME VARIABLES: The primary outcome variable was the visual occlusal analysis score, a 1.00 to 4.00 continuous scale measuring the similarity of the achieved occlusion to the planned (control) occlusion assessed by an oral and maxillofacial surgeon and an orthodontist. High visual occlusal analysis score indicated greater occlusal accuracy, with 3.50 defined as the threshold for accuracy. The secondary outcome variable was the linear error of the achieved occlusion at the canine and first molar teeth, with lower error indicating greater accuracy. An a priori accuracy threshold of 0.5 mm was set for this variable. COVARIATES: None. ANALYSES: Kruskal-Wallis test with post hoc testing was used to analyze the difference in the outcome variables of interest. P value < .05 was considered statistically significant. RESULTS: Thirty-two attempts for each technique showed that brackets had higher VAOS than MMF screws and embrasure wires (median differences 1.49 and 0.48, P < .001), and had lower linear occlusal error (median differences 0.35 to 0.99 mm, P < .001). CONCLUSION AND RELEVANCE: MMF technique influences the quality of occlusal control, with greater visual rating scores and lower linear errors seen with brackets than with embrasure wires or MMF screws.

Use of T-Scan III in analyzing occlusal changes in molar fixed denture placement.

BACKGROUND: This study aims to analyze the longitudinal variation of occlusal force distribution prior to and after fixed restoration for molar full-crowns with T-SCAN III which provide reference for occlusal adjustment and long-term maintenance. METHODS: We enrolled a total of 20 patients who received conventional restorative treatment for molars. The occlusion examination was conducted in 3 stages (before placement, immediately after placement, and 3 months after placement) using T-SCAN III (Tekscan South Boston, MA, USA, 10.0) to examine and measure the occlusal contact areas of the full dentition. RESULTS: The results indicated that the occlusal force distribution in the molar region of the patients changed before and after the fixed restoration, but the percentages of occlusal force in the dental arch of the molar did not differ significantly before and after the restoration (P > 0.05). Three months after the fixed restoration, the percentage of occlusal force in the restored dental arches of lateral teeth increased significantly (P < 0.05). CONCLUSION: The results of this study indicated that the occlusal forces of the patients changed with tooth movement and adaptation, which is mainly reflected in the increasing occlusal force. Quantitative occlusal force analysis using T-SCAN III occlusal analyzer can provide more objective and accurate data to effectively guide clinical occlusion adjustments.

Exploratory Study of Growth of Circumference of Mandibular Fossa Adjacent to Petrous Portion of Temporal Bone Using Dried Skulls.

The morphogenetic process of development of the circumference of the mandibular fossa during tooth eruption, which involves the replacement of deciduous teeth with permanent teeth, is strongly affected by occlusion. To the best of our knowledge, no studies have investigated the effect of occlusion on this process. This study investigated the morphogenetic process of development during tooth eruption using dried skulls harvested from Indian donors. The average distance between the ala-major-squamosa suture and the foramen ovale according to age group was as follows: 3.24 mm in the 8-month-old group and 8.92 mm in the adult group. The average distance between the ala-major-squamosa suture and the apex of the articular tubercle according to age groups was as follows: 10.38 mm in the 8-month-old group and 19.34 mm in the adult group. The average distance between the point of intersection of the petrosquamous fissure and petrotympanic fissure located on the perpendicular line drawn posteriorly from the shortest distance of the medio-lateral axis between the ala-major-squamosa suture and the apex of the articular tubercle according to age group was as follows: 9.68 mm in the 8-month-old group and 14.3 mm in the adult group. These results suggest that the mandibular fossa is strongly affected by load due to occlusion, unlike the growth of the neurocranium. This indicates that the effect of occlusion is a secondary element in the morphogenetic process of development of the circumference of the mandibular fossa.

Sleepiness in children with severe malocclusion compared with in children with neutral occlusion.

INTRODUCTION: The study aimed to compare daytime sleepiness in children with severe malocclusion with healthy children with neutral occlusion (controls) and to analyze associations between daytime sleepiness and craniofacial morphology in children with severe malocclusion. METHODS: In 120 children with severe malocclusion (73 girls, 47 boys; mean age, 11.96 years; mean body mass index [BMI] score, 18.97 kg/m2) and 35 controls (18 girls, 17 boys; mean age, 11.97 years; mean BMI score, 20.28 kg/m2), sleep and daytime sleepiness were recorded using Epworth Sleepiness Scale and Berlin Questionnaire. Occlusion was registered clinically, and craniofacial morphology was assessed on lateral cephalograms. Differences in daytime sleepiness and sleep between the groups and associations between daytime sleepiness and sleep and craniofacial morphology were analyzed by a general linear model adjusted for age, gender, and BMI score. RESULTS: Daytime sleepiness occurred significantly more often in children with malocclusion than in control subjects (P = 0.015). There was a tendency for children with malocclusion to feel extremely tired during the day more often than controls (P = 0.054). There was no significant difference between the groups in sleeping hours during night-time, but the amount of sleep was negatively associated with age (P <0.001) and BMI score (P = 0.004). Only maxillary inclination was significantly associated with daytime sleepiness (P = 0.043). CONCLUSIONS: Daytime sleepiness occurred significantly more often in children with severe malocclusion than in those with neutral occlusion, and the association between daytime sleepiness and craniofacial morphology may exist. The results might prove valuable in interdisciplinary collaboration between medical doctors and orthodontists in diagnostics, prevention, and treatment of children at risk for sleep-disordered breathing.

A Proof of Concept: Optimized Jawbone-Reduction Model for Mandibular Fracture Surgery.

Previous research on computer-assisted jawbone reduction for mandibular fracture surgery has only focused on the relationship between fractured sections disregarding proper dental occlusion with the maxilla. To overcome malocclusion caused by overlooking dental articulation, this study aims to provide a model for jawbone reduction based on dental occlusion. After dental landmarks and fracture sectional features are extracted, the maxilla and two mandible segments are aligned first using the extracted dental landmarks. A swarm-based optimization is subsequently performed by simultaneously observing the fracture section fitting and the dental occlusion condition. The proposed method was evaluated using jawbone data of 12 subjects with simulated and real mandibular fractures. Results showed that the optimized model achieved both accurate jawbone reduction and desired dental occlusion, which may not be possible by existing methods.

Identifying barriers and strategies for achieving competency in removable prosthodontics in undergraduate dental students: a mixed-method study.

BACKGROUND: Developing competency in removable prosthodontics (RP) is challenging for undergraduate dental students because it involves threshold concepts and tacit knowledge. Understanding this process can enhance learning and professional development in RP. The objective of this study was to identify the barriers hindering knowledge (threshold concept) and skill (tacit knowledge) development, and to propose strategies for achieving RP competency. METHODS: Adopting critical theory, quantitative and qualitative approaches were implemented. The participants were third- to sixth-year dental students and recent dental school graduates. An online questionnaire was used to investigate the knowledge and skills required for achieving RP competency and barriers to RP competency development. Four focus groups were conducted to gather in-depth information. The data was analyzed using descriptive statistics and thematic analysis. RESULTS: A total of 322 respondents completed the questionnaire (67% response rate), and 26 of them participated in focus group interviews. The four threshold concepts to achieve RP competency were the basic principles of RP, removable partial denture design, occlusion, and dental materials. The two main tacit knowledges were impression making and material handling skills. The curriculum should integrate strategies to assist dental students in overcoming intrinsic barriers such as self-experience, revision, and spatial-temporal relationship, along with extrinsic factors such as clinical correlations of content, discussions, and immediate feedback. CONCLUSIONS: Threshold concepts and tacit knowledge in RP for undergraduate dental students have been proposed The strategies to overcome barriers comprise intrinsic and extrinsic factors that include the adoption of experiential learning. This study suggests effective teaching methods and learning strategies to maximize student learning and RP competency development when designing the undergraduate RP curriculum in dental education.

Development of occlusal canting identifying tool: verification, reliability and validation assessment.

INTRODUCTION: Occlusal cant (OC) is a malocclusion trait that lacks accurate clinical assessment methods. The occlusal canting identifying tool (OCIT) was invented and patented as a clinical tool to accurately identify and quantify the degree of maxillary OC. This study aimed to 1) develop a prototype of the OCIT, 2) verify the functionality of the OCIT and 3) assess the validity and reliability of the OCIT. MATERIALS AND METHODS: A patented OCIT design was revised, and the dimensions were finalized, followed by a three-dimensional conceptual prototype design that was reviewed and approved by the inventors. Verification was performed using a digital angle gauge to determine the accuracy of the bubble level as well as the angle between the bite plate and the protractor. For laboratory validation, 40 orthodontists measured the simulated OC at (0°, 2°, 4°, 6° and 8°) on five phantom heads using the OCIT. A reliability assessment of the tool was performed in three occasions by one orthodontist using the same laboratory settings. RESULTS: The OCIT was prototyped from a medical-grade stainless steel alloy (316 L). Verification assessment revealed that the accuracy error of the bubble level (0.316° ± 0.028°) was statistically significant but clinically insignificant, while that of the angle between the bite plate and protractor (0.100° ± 0.050°) was statistically insignificant. Validation assessment showed high validity of the OCIT with no statistically significant difference between the OCIT and the reference values, having more errors in identifying smaller OC degrees compared to larger OC degrees. The intraclass correlation coefficient indicated the high reliability of the OCIT. CONCLUSION: The OCIT was verified and proven to be a valid and reliable clinical tool that accurately evaluates the degree of OC.

Assessing the impact of occlusal plane rotation on facial aesthetics in orthodontic treatment: a machine learning approach.

BACKGROUND: Adequate occlusal plane (OP) rotation through orthodontic therapy enables satisfying profile improvements for patients who are disturbed by their maxillomandibular imbalance but reluctant to surgery. The study aims to quantify profile improvements that OP rotation could produce in orthodontic treatment and whether the efficacy differs among skeletal types via machine learning. MATERIALS AND METHODS: Cephalometric radiographs of 903 patients were marked and analyzed by trained orthodontists with assistance of Uceph, a commercial software which use artificial intelligence to perform the cephalometrics analysis. Back-propagation artificial neural network (BP-ANN) models were then trained based on collected samples to fit the relationship among maxillomandibular structural indicators, SN-OP and P-A Face Height ratio (FHR), Facial Angle (FA). After corroborating the precision and reliability of the models by T-test and Bland-Altman analysis, simulation strategy and matrix computation were combined to predict the consequent changes of FHR, FA to OP rotation. Linear regression and statistical approaches were then applied for coefficient calculation and differences comparison. RESULTS: The regression scores calculating the similarity between predicted and true values reached 0.916 and 0.908 in FHR, FA models respectively, and almost all pairs were in 95% CI of Bland-Altman analysis, confirming the effectiveness of our models. Matrix simulation was used to ascertain the efficacy of OP control in aesthetic improvements. Intriguingly, though FHR change rate appeared to be constant across groups, in FA models, hypodivergent group displayed more sensitive changes to SN-OP than normodivergent, hypodivergent group, and Class III group significantly showed larger changes than Class I and II. CONCLUSIONS: Rotation of OP could yield differently to facial aesthetic improvements as more efficient in hypodivergent groups vertically and Class III groups sagittally.

[Comparison of three-dimensional position of maxillary dentition model treated with two digital transfer methods].

Objective: To compare and evaluate the difference in maxillary dentition position using an anatomical facebow and jaw movement analyzer. Methods: From March to May 2023, 15 medical interns from Yantai Stomatological Hospital were recruited, including 9 males and 6 females, aged 20-25 years. Digital models and plaster models of maxillary dentition were obtained from the 15 medical interns. The anatomical facebow group (AFB) and jaw movement analyzer group (JMA) were used to transfer the position of the maxillary dentition to the virtual articulator. The virtual occlusal articulator module of exocad denture design software was used to measure the inclination angle of the occlusal plane of the two groups, the distance between the mesio-incisal angle of the left maxillary central incisor and the lateral center point of the lateral condylar sphere of the virtual occlusal articulator, the distance between the mesial buccal cusp of the maxillary first molar and the lateral center point of the lateral condyle sphere of the virtual articulator. The same marks (mesial incisor point of left maxillary central incisor and mesial buccal cusp point of both maxillary first molars) were measured in two groups of maxillary dentition, and the root-mean-square error between 3 points was calculated. Results: The occlusal plane inclination angle in AFB group (9.11°±3.85°) was significantly larger than that in JMA group (4.94°±2.69°) (t=10.45, P<0.001). There were significant differences between AFB and JMA groups. The distances from the mesial cusp of the left first molar to the lateral center of the left condylar, from the mesial cusp of the left maxillary central incisor to the lateral center of the left condylar[(91.75±3.05), (129.09±4.60) mm]were significantly smaller than those in the JMA group[(95.68±5.45), (132.41±5.64) mm](t=-4.48, P=0.001; t=-4.21, P=0.001). In both groups of models, the distance of the mesial cusp of the left maxillary central incisor was (8.81±2.56) mm, and the distance between mesial buccal cusp of maxillary left first molar was (7.56±2.49) mm, the distance between mesial buccal cusp of maxillary right first molar was (7.13±2.77) mm; the root mean square error was (7.93± 2.94) mm. Compared with 0, the difference was statistically significant (t=10.45, P<0.001). Conclusions: There were differences between the two methods (anatomical facebow and the jaw movement analyzer) for transferring the maxillary dentition position to the three-dimensional space position of the virtual articulator.