A dye encapsulated zinc-based metal-organic framework as a dual-emission sensor for highly sensitive detection of antibiotics.

Self-assembly of two Zn-MOFs, [Zn2L(DMF)3]·H2O·5DMF (1) and [Zn2L(H2O)2]·4H2O·3DMF (2), was achieved with an amide-functionalized tetracarboxylate ligand under similar conditions. Incorporated amide groups make the tetratopic linkers exhibit different configurations, tetrahedron and square, and subsequently combine tetrahedral [Zn2(CO2)4] clusters or square paddle-well [Zn2(CO2)4] clusters to afford a lon net for 1 and a nbo net for 2. Remarkably, 2 demonstrated high porosity and amide group decorated cages, and thereby proved to be a good capturing agent for a fluorescent dye molecule (DMASM). Consequently, a dual-emitting DMASM@2 sensor was successfully fabricated based on effective energy transfer from the host framework to DMASM with the variable luminescent color being visible to the naked eye. DMASM@2 could be used for the detection of metronidazole (MDZ) and dimetridazole (DTZ) with high sensitivity and remarkable recyclability.

Direct and indirect electrochemical reduction prior to a biological treatment for dimetridazole removal.

Two different electrochemical reduction processes for the removal of dimetridazole, a nitroimidazole-based antibiotic, were examined in this work. A direct electrochemical reduction was first carried out in a home-made flow cell in acidic medium at potentials chosen to minimize the formation of amino derivatives and then the formation of azo dimer. Analysis of the electrolyzed solution showed a total degradation of dimetridazole and the BOD5/COD ratio increased from 0.13 to 0.24. An indirect electrochemical reduction in the presence of titanocene dichloride ((C5H5)2TiCl2), which is used to reduce selectively nitro compounds, was then investigated to favour the formation of amino compounds over hydroxylamines and then to prevent the formation of azo and azoxy dimers. UPLC-MS/MS analyses showed a higher selectivity towards the formation of the amino compound for indirect electrolyses performed at pH 2. To confirm the effectiveness of the electrochemical reduction, a biological treatment involving activated sludge was then carried out after direct and indirect electrolyses at different pH. The enhancement of the biodegradability was clearly shown since mineralization yields of all electrolyzed solutions increased significantly.

Overall adsorption rate of metronidazole, dimetridazole and diatrizoate on activated carbons prepared from coffee residues and almond shells.

This study analyzed the overall adsorption rate of metronidazole, dimetridazole, and diatrizoate on activated carbons prepared from coffee residues and almond shells. It was also elucidated whether the overall adsorption rate was controlled by reaction on the adsorbent surface or by intraparticle diffusion. Experimental data of the pollutant concentration decay curves as a function of contact time were interpreted by kinetics (first- and second-order) and diffusion models, considering external mass transfer, surface and/or pore volume diffusion, and adsorption on an active site. The experimental data were better interpreted by a first-order than second-order kinetic model, and the first-order adsorption rate constant varied linearly with respect to the surface area and total pore volume of the adsorbents. According to the diffusion model, the overall adsorption rate is governed by intraparticle diffusion, and surface diffusion is the main mechanism controlling the intraparticle diffusion, representing >90% of total intraparticle diffusion.

[Kinetics and Reactive Species Analysis of Dimetridazole Degradation by TiO2].

Dimetridazole is considered as an emerging pollutant in waterbodies, which can potentially impact ecosystem and human health. Heterogeneous photocatalytic decomposition of dimetridazole by TiO2 was investigated under 365 nm UV light and effects of initial pH, TiO2 content and dimetridazole concentration on photocatalytic process were discussed. The results indicated that the optimized experiment condition is that the TiO2 content of 1 g x L(-1), dimetridazole concentration of 40 mg x L (-1), pH of 11, dimetridazole can be removed 90%. The photocatalytic degradation kinetics of dimetridazole could be fitted to the quasi-first-order equation. Photocatalytic degradation of dimetridazole can take place via two pathways: oxidation by *OH and reduction by e -.

A novel core-shell magnetic nano-sorbent with surface molecularly imprinted polymer coating for the selective solid phase extraction of dimetridazole.

A novel core-shell magnetic nano-sorbent with surface molecularly-imprinted polymer coating was prepared via a sol-gel process. Methyltrimethoxysilane and 3-aminopropyltriethoxysilane were used as functional monomers, tetraethyl orthosilicate as cross-linker, and Al(3+) as dopant to generate Lewis acid sites in the silica matrix for the metal coordinate interactions with the template dimetridazole (DMZ). The ratios of the monomers, the dopant, and the cross-linker, were optimised by a OA9 (3(4)) orthogonal array design. The resultant sorbent was characterised by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, powder X-ray diffraction, and magnetometry. The binding performances of the sorbent were evaluated by static, kinetic and selective adsorption experiments. The nano-sorbent was successfully applied to solid phase extraction followed by spectrophotometric determination of DMZ in real samples. Spiked recoveries ranged from 90.33% to 106.20% for egg, milk powder, and pig feed samples, with relative standard deviations of less than 4.54%.

Development of a rapid method for the determination and confirmation of nitroimidazoles in six matrices by fast liquid chromatography-tandem mass spectrometry.

A rapid liquid chromatography-tandem mass spectrometric (LC-MS/MS) method was developed to identify and to quantify nitroimidazoles, metronidazole (MNZ), ronidazole (RNZ) and dimetridazole (DMZ) and their corresponding hydroxy metabolites, MNZ-OH and 2-hydroxymethyl-1-methyl-5-nitroimidazole (HMNNI) in plasma, milk, muscle, egg, honey and feed samples. The same sample clean-up procedure including a novel solid-phase extraction (SPE) on polymeric Strata-SDB cartridges was used for each matrix. The analytes were separated on Kinetex XB C-18 core-shell type HPLC column using isocratic elution mode with a mobile phase containing 0.1% formic acid in water/methanol (88/12, v/v, pH 2.6) at a flow rate of 0.7 ml/min. The main advantage of the developed method is that the analysis time of only 3 min, which is about three to ten times shorter than in other reported HPLC methods. The developed method was validated using a matrix-comprehensive in-house validation strategy. The matrix effect of LC-MS/MS analysis was also investigated. Results are presented from the successful application of the developed method to an incurred pork meat certified reference material and to incur porcine plasmas in a proficiency test in year 2011.

Determination of dimetridazole, ronidazole and their common metabolite in poultry muscle and eggs by high performance liquid chromatography with UV detection and confirmatory analysis by atmospheric pressure chemical ionisation mass spectrometry.

A method was developed for the determination of the nitroimidazole compounds dimetridazole (DMZ) and ronidazole (RNZ) and their common metabolite, 2-hydroxymethyl-1-methyl-5-nitroimidazole (2-OH-M). Extracts obtained from a clean-up process using strong cation exchange (SCX) solid phase extraction (SPE) can be analysed either by high performance liquid chromatography with UV detection (HPLC-UV) or by high performance liquid chromatography with atmospheric pressure chemical ionisation mass spectrometry (HPLC-APCI-MS) as a confirmatory method. Up to 20 samples can be extracted in approximately 4 h. The HPLC-UV analysis had a limit of detection of 0.5 microgram kg-1. Validation in chicken muscle fortified at a concentration of 5 micrograms kg-1 gave recoveries of 75% DMZ, 77% RNZ and 81% 2-OH-M with RSDs of 16.4, 11.3 and 14.0%, respectively (n = 17). Validation in egg fortified at the same concentration gave recoveries of 77% DMZ, 80% RNZ and 80% 2-OH-M, with RSDs of 14.9, 22.0 and 18.2%, respectively (n = 18). The limit of detection of the HPLC-APCI-MS method was 0.1 microgram kg-1 for DMZ and RNZ and 0.5 microgram kg-1 for 2-OH-M. This method gave mean recoveries in fortified egg samples of 65% DMZ, 87% RNZ and 75% 2-OH-M with RSDs of 22, 11 and 14%, respectively (n = 10). The ratios of the peak areas of the molecular ion and a fragment ion were monitored as added confirmation of the presence of the analyte. Both the HPLC-UV screening procedure and the HPLC-APCI-MS confirmatory method have subsequently been used for the analysis of several hundred samples as part of UK surveillance programmes.