Stabilization of zein nanoparticles with tween-80 and fucoidan for encapsulation of eugenol via a nozzle simulation chip.

Eugenol (EU), a natural bioactive compound found in various plants, offers numerous health benefits, but its application in the food and pharmaceutical industry is limited by its high volatility, instability, and low water solubility. Therefore, this study aimed to utilize the surface coating technique to develop zein-tween-80-fucoidan (Z-T-FD) composite nanoparticles for encapsulating eugenol using a nozzle simulation chip. The physicochemical characteristics of the composite nanoparticles were examined by varying the weight ratios of Z, T, and FD. Results showed that the Z-T-FD weight ratio of 5:1:15 exhibited excellent colloidal stability under a range of conditions, including pH (2-8), salt concentrations (10-500 mmol/L), heating (80 °C), and storage (30 days). Encapsulation of EU into Z-T-FD nanoparticles (0.5:5:1:15) resulted in an encapsulation efficiency of 49.29 ± 1.00%, loading capacity of 0.46 ± 0.05%, particle size of 205.01 ± 3.25 nm, PDI of 0.179 ± 0.006, and zeta-potential of 37.12 ± 1.87 mV. Spherical structures were formed through hydrophobic interaction and hydrogen bonding, as confirmed by Fourier transform infrared spectroscopy and molecular docking. Furthermore, the EU-Z-T-FD (0.5:5:1:15) nanoparticles displayed higher in vitro antioxidant properties (with DPPH and ABTS radical scavenging properties at 75.28 ± 0.16% and 39.13 ± 1.22%, respectively), in vitro bioaccessibility (64.78 ± 1.37%), and retention rates under thermal and storage conditions for EU compared to other formulations. These findings demonstrate that the Z-T-FD nanoparticle system can effectively encapsulate, protect, and deliver eugenol, making it a promising option for applications in the food and pharmaceutical industries.

Encapsulation of antioxidants with colloidal lipid particles for enhancing the photooxidation stability of phytosterol in Pickering emulsions.

In order to prevent the photooxidation of phytosterols, a new type of Pickering emulsion was developed by regulating the oriented distribution of antioxidants in colloidal lipid particles (CLPs) at the oil-water interface. High-melting-point and low-melting-point lipids were tested to modulate their protective effect against phytosterols photooxidation. Results showed that CLPs could stabilize Pickering emulsion and encapsulate antioxidants, providing a dual functional delivery system for phytosterols protection. The Pickering emulsion formed had a particle size of around 350-820 nm, and the crystallization and melting temperatures of tripalmitin particles were approximately 32 °C and 63.8 °C, respectively. The addition of tributyrin or tricaprylin reduced the crystallization and melting temperatures of Pal CLPs and improved the photooxidation emulsion stability. The prepared Pickering emulsion remained stable for a maximum of 12 days under accelerated light-induced oxidation. Among all formulations, the emulsion primarily composed of tripalmitin CLPs, with added tributyrin and resveratrol, exhibited the highest photooxidation stability.

Multistimuli responsive microcapsules produced by the prilling/vibration technique for targeted colonic delivery of probiotics.

This study aimed to microencapsulate the probiotic strain Lactiplantibacillus plantarum 4S6R (basonym Lactobacillus plantarum) in both microcapsules and microspheres by prilling/vibration technique. A specific polymeric mixture, selected for its responsiveness to parallel colonic stimuli, was individuated as a carrier of microparticles. Although the microspheres were consistent with some critical quality parameters, they showed a low encapsulation efficiency and were discarded. The microcapsules produced demonstrated high yields (97.52%) and encapsulation efficiencies (90.06%), with dimensional analysis and SEM studies confirming the desired size morphology and structure. The results of thermal stress tests indicate the ability of the microcapsules to protect the probiotic. Stability studies showed a significant advantage of the microcapsules over non-encapsulated probiotics, with greater stability over time. The release study under simulated gastrointestinal conditions demonstrated the ability of the microcapsules to protect the probiotics from gastric acid and bile salts, ensuring their viability. Examination in a simulated faecal medium revealed the ability of the microcapsules to release the bacteria into the colon, enhancing their beneficial impact on gut health. This research suggests that the selected mixture of reactive polymers holds promise for improving the survival and efficacy of probiotics in the gastrointestinal tract, paving the way for the development of advanced probiotic products.

Implementing a closed system drug transfer device to enable nurses to prepare monoclonal antibody treatment.

BACKGROUND: Efforts to increase capacity for oncology treatment in the author's Chemotherapy Day Unit, while allowing staff to treat more patients and offer more flexibility to patients, increased strain on the Aseptic Pharmacy at the author's Trust. Therefore, the possibility of nurse-led drug preparation was explored. AIMS: Nurse-led monoclonal antibody (MAb) preparation was piloted to investigate whether a reduction in reliance on Aseptic Pharmacy could co-exist with maintaining optimal treatment capacity. The effectiveness of a closed system transfer device (CSTD) to protect nurses against drug exposure was also explored. METHODS: A risk assessment for MAbs considered for nurse-led preparation was created, alongside a procedure for the safe handling of systemic anti-cancer therapy (SACT) with the use of a CSTD. FINDINGS: The pilot resulted in an 89% reduction in the time patients had to wait for MAbs to be prepared. Seven oncology drugs were included in the new procedure without increasing the risk of exposure for nurses. CONCLUSION: The pilot successfully reduced demand on Aseptic Pharmacy while enabling efficient capacity use on the Chemotherapy Day Unit. The use of the CSTD minimised the risk of nurse exposure to SACT.

Optimizing Process Parameters for Controlled Drug Delivery: A Quality by Design (QbD) Approach in Naltrexone Microspheres.

The formulation of microspheres involves a complex manufacturing process with multiple steps. Identifying the appropriate process parameters to achieve the desired quality attributes poses a significant challenge. This study aims to optimize the critical process parameters (CPPs) involved in the preparation of naltrexone microspheres using a Quality by Design (QbD) methodology. Additionally, the research aims to assess the drug release profiles of these microspheres under both in vivo and in vitro conditions. Critical process parameters (CPPs) and critical quality attributes (CQAs) were identified, and a Box-Behnken design was utilized to delineate the design space, ensuring alignment with the desired Quality Target Product Profile (QTPP). The investigated CPPs comprised polymer concentration, aqueous phase ratio to organic phase ratio, and quench volume. The microspheres were fabricated using the oil-in-water emulsion solvent extraction technique. Analysis revealed that increased polymer concentration was correlated with decreased particle size, reduced quench volume resulted in decreased burst release, and a heightened aqueous phase ratio to organic phase ratio improved drug entrapment. Upon analyzing the results, an optimal formulation was determined. In conclusion, the study conducted in vivo drug release testing on both the commercially available innovator product and the optimized test product utilizing an animal model. The integration of in vitro dissolution data with in vivo assessments presents a holistic understanding of drug release dynamics. The QbD approach-based optimization of CPPs furnishes informed guidance for the development of generic pharmaceutical formulations.

Microencapsulation of apricot kernel oil: Utilization of mushroom by-product as an emulsifier in oil-in-water emulsion.

The present study investigated mushroom by-products as a substitute for emulsifiers in the microencapsulation of apricot kernel oil. Mushroom by-product emulsions were more viscous and had higher centrifugal (85.88±1.19 %) and kinetic (90.52±0.98 %) stability than control emulsions (Tween 20 was used as emulsifier). Additionally, spray-drying mushroom by-product emulsions yielded a high product yield (62.56±1.11 %). Furthermore, the oxidative stability of powder products containing mushroom by-products was observed to be higher than that of the control samples. For an accelerated oxidation test, the samples were kept at various temperatures (20, 37, and 60 °C). TOTOX values were assessed as indicators of oxidation, with values exceeding 30 indicating oxidation of the samples. Of the samples stored at 60 °C, the non-microencapsulated apricot kernel oil oxidized by the fifth day (41.12±0.13 TOTOX value), whereas the powder samples containing the mushroom by-products remained unoxidized until the end of the tenth day (37.05±0.08 TOTOX value). This study revealed that mushroom by-products could be a viable alternative for synthetic emulsifiers in the microencapsulation of apricot kernel oil. It has been observed that using mushroom by-products instead of synthetic emulsifiers in oil microencapsulation can also delay oxidative degradation in microencapsulated powders.

Microencapsulation of Essential Oils Using Faba Bean Protein and Chia Seed Polysaccharides via Complex Coacervation Method.

The aim of this study was to develop microcapsules containing juniper or black pepper essential oils, using a combination of faba bean protein and chia seed polysaccharides (in ratios of 1:1, 1:2, 2:1). By synergizing these two polymers, our goal was to enhance the efficiency of essential oil microencapsulation, opening up various applications in the food industry. Additionally, we aimed to investigate the influence of different polymer mixing ratios on the properties of the resulting microcapsules and the course of the complex coacervation process. To dissolve the essential oils and limit their evaporation, soybean and rapeseed oils were used. The powders resulting from the freeze-drying of coacervates underwent testing to assess microencapsulation efficiency (65.64-87.85%), density, flowability, water content, solubility, and hygroscopicity. Additionally, FT-IR and DSC analyses were conducted. FT-IR analysis confirmed the interactions between the components of the microcapsules, and these interactions were reflected in their high thermal resistance, especially at a protein-to-polysaccharide ratio of 2:1 (177.2 °C). The water content in the obtained powders was low (3.72-7.65%), but it contributed to their hygroscopicity (40.40-76.98%).

Adenosine Encapsulation and Characterization through Layer-by-Layer Assembly of Hydroxypropyl-ß-Cyclodextrin and Whey Protein Isolate as Wall Materials.

Adenosine, as a water-soluble active substance, has various pharmacological effects. This study proposes a layer-by-layer assembly method of composite wall materials, using hydroxypropyl-ß-cyclodextrin as the inner wall and whey protein isolate as the outer wall, to encapsulate adenosine within the core material, aiming to enhance adenosine microcapsules' stability through intermolecular interactions. By combining isothermal titration calorimetry with molecular modeling analysis, it was determined that the core material and the inner wall and the inner wall and the outer wall interact through intermolecular forces. Adenosine and hydroxypropyl-ß-cyclodextrin form an optimal 1:1 complex through hydrophobic interactions, while hydroxypropyl-ß-cyclodextrin and whey protein isolate interact through hydrogen bonds. The embedding rate of AD/Hp-ß-CD/WPI microcapsules was 36.80%, and the 24 h retention rate under the release behavior test was 76.09%. The method of preparing adenosine microcapsules using composite wall materials is environmentally friendly and shows broad application prospects in storage and delivery systems with sustained release properties.

Compounding and Characterization of a Selfmicroemulsifying System of Ticagrelor Tablets for Enhanced Solubility.

Ticagrelor is used to inhibit acute coronary syndrome, but its poor solubility and low bioavailability limit its in-vivo efficacy. The purpose of this study was to manufacture an optimized ticagrelor-loaded self-microemulsifying drug-delivery system in the form of tablets to enhance the solubility and dissolution of that drug. A preliminary study was conducted to determine the extent of turbidity of oils for this study, and a pseudoternaryphase diagram was used to identify the region of formation of microemulsion with 3 ratios (1:1,1:2, and 1:3). The solubility of ticagrelor was determined with the selected oil and a surfactant-and-cosurfactant mixture. A simplex lattice mixture design was used to compound the microemulsion. The microemulsion was converted to granules by the use of an adsorbent (aerosol) after a precipitation study. After characterization, the resultant granules were compressed into tablets for an in-vitro release study. The optimized formulation was subjected to various characterization procedures to determine the zeta potential, particle size, and surface morphology. The solubility of the drug was found to have increased manyfold in all formulations, and the optimized formulation was found to be 221.37 mg/mL. With respect to the ticagrelor tablets, aerosol up to 30% was needed as an adsorbent in the self-microemulsifying drug-delivery system. The compression of the ticagrelor granules was satisfactory for tablet formation. In all formulations, the release of the active drug was more than 80% within 30 minutes of dissolution time. The optimized icagrelorloaded self-microemulsifying drug-delivery system formulation consisted of medium-chain triglyceride oil (47.88.0%), surfactant (28.25%), and cosurfactant (23.85%), which significantly improved the dissolution of ticagrelor. The results of analysis via scanning electron microscopy revealed that the surface and size of the drug and the zeta potential were also satisfactory and suggested that the optimized ticagrelor-loaded self-microemulsifying drug-delivery system described in this report could be successfully used as an efficient method for achieving enhanced dissolution of ticagrelor.

A Cross-sectional Online Questionnaire-based Survey About the Use of Compounded Medications in Veterinary Ophthalmology.

The aims of this survey were to determine how veterinary ophthalmologists worldwide use compounded ophthalmic drugs to treat ocular diseases, define their attitudes regarding compounding pharmacies, and identify commonly dispensed veterinary ophthalmic formulations as well as the diseases for which those preparations are most often prescribed. Respondents voluntar i ly and anonymously completed a questionnaire that was sent to a total of 1014 veterinary ophthalmologists at universities, specialty colleges, and ophthalmology associations in 24 countries. One hundred thirty (12.83%) veterinary ophthalmologists replied. Of those, 87 (66.92%) had worked in  veterinary ophthalmology for more than 10 years. Ten to 30% of their total prescriptions were compounded ophthalmic drugs, the most common of which were tacrolimus and cyclosporine for the treatment of keratoconjunctivitis sicca. Reported advantages of treatment with a compound included the accessibility of preparations that were not commercially available and the ability to customize formulations; reported disadvantages included brief shelf life, delivery time, and cost.

Accelerated Stability Assessment of Extemporaneously Compounded Amiloride Nasal Spray.

Amiloride is a U.S. Food and Drug Administration-approved diuretic agent used to treat hypertension and congestive heart failure. Recent human and animal studies have suggested that amiloride may also have a role in treating anxiety through its acid-sensing ion channel antagonism. Intranasal administration of amiloride nasal spray via an extemporaneously compounded preparation has the potential for rapid delivery to the site of action to achieve therapeutic outcomes in individual patients with anxiety disorders. However, these patient-specific preparations do not have the pre-formulation characterization, including chemical stability, that conventional manufactured dosage forms have. The objective of this study was to assess the estimated chemical stability of compounded amiloride nasal spray over 6 months and 12 months utilizing accelerated degradation with high heat and the Arrhenius equation. A stability-indicating highperformance liquid chromatography analytical method was employed at appropriate intervals over a 12-month period to reveal that amiloride remained chemically stable over the period tested and by extrapolation. Physical stability and compatibility with the preservative benzyl alcohol were also confirmed via visual inspection, pH monitoring, and measurement of turbidity.

Bracketed Stability Evaluation of Methimazole USP in PLO Gel Mediflo™30 Pre-Mixed.

Extemporaneously compounded Methimazole 1% and 10% in PLO Gel Mediflo™30 Pre-Mixed were studied to assess physical, chemical and microbial stability over time. The formulations were stored at room temperature in tightly closed, light resistant plastic containers. Chemical stability was evaluated using a validated, stability indicating HPLC analysis and physical stability was evaluated through observation of organoleptic appearance and pH measurement at predetermined time points. Lastly, antimicrobial effectiveness testing was conducted per USP <51> guidelines. The results indicate that compounded Methimazole remained within the stability criteria for the duration of the study and can be assigned an extended beyond-use-date of 120 days under the studied conditions.

Innovative Fusion of Probiotics and Mouth Fresheners: Investigating Unaltered Growth, Microscopic Analysis, and Mucoadhesive Strength.

Since ancient times, mouth fresheners in many different forms have been used throughout the world. Traditional knowledge describes the health benefits of mouth fresheners, and contemporary science is now investigating their benefits. Claims have been made that mouth fresheners not only improve digestion but also promote oral health. Similar, but in a more profound sense, probiotics offer astounding advantages in treating many disorders. In certain cases, probiotics also offer prophylactic effects. Numerous benefits for dental health are being studied for B. coagulans (MB-BCM9) and B. subtilis (MB-BSM12). In this current study, a probiotic and a mouth freshener were combined to ameliorate the impacts of both. The oral residence of probiotics was enhanced by employing mucoadhesive polymers. Numerous compositions were developed and evaluated for the unaltered growth of probiotics, along with other evaluations like microscopy, in vitro mucoadhesive strength, and stability studies. Xanthan gum and hydroxypropyl methylcellulose were used in the development of mucoadhesive probiotic powder by employing the lyophilization technique. More than five hours of residence time were observed in the in vitro study with goat oral mucosa. The enumeration study validated the label claims of MB-BCM9 and MB-BSM12. It also concluded that none of the components of the formulation had a detrimental effect on probiotics. In essence, the present work discloses the novel and stable formulation of a probiotic-based mouth freshener.

Basics of Sterile Compounding: Sterilization Methods in Sterile Product Manufacturing.

Sterilization methods to produce sterile preparations include heat, gas, radiation, and filtration. This article focuses on heat, gas, and radiation sterilization, plus a brief introduction to bright-light sterilization. Microbiology basics and microbial death kinetics, key to understanding why these sterilization methods work, will also be briefly discussed. Filtration sterilization will be covered in a separate article.

Impact on Quality during In-Use Preparation of an Antibody Drug Conjugate with Eight Different Closed System Transfer Device Brands.

The aim of this study was to investigate the in-use compatibility of eight commercially available closed system transfer device brands (CSTDs) with a formulated model antibody drug conjugate (ADC). Overall, in-use simulated dosing preparation applying the CSTD systems investigated raised concerns for several product quality attributes. The incompatibilities observed were mainly associated with increased visible and subvisible particles formation as well as significant changes in holdup volumes. Visible and subvisible particles contained heterogeneous mixtures of particle classes, with the majority of subvisible particles associated with silicone oil leaching from CSTD systems during simulated dose preparation upon contact with the ADC formulation. These observations demonstrate that CSTD use may adversely impact product quality and delivered dose which could potentially lead to safety and efficacy concerns during administration. Other product quality attributes measured including turbidity, color, ADC recovery, and purity by size exclusion HPLC, did not show relevant changes. It is therefore strongly recommended to test and screen the compatibility of CSTDs with the respective ADC, in a representative in-use simulated administration setting, during early CMC development, i.e., well before the start of clinical studies, to include information about compatibility and to ensure that the CSTD listed in the manuals of preparation for clinical handling has been thoroughly assessed before human use.

Preparation and comparison of binary and ternary inclusion complexes of aripiprazole using L-arginine/lysine and MßCD/HPßCD by using different molar ratios.

Aripiprazole (ARI), an antipsychotic having low solubility and stability. To overcome this, formation of binary and ternary using inclusion complexes of Methyl-ß-cyclodextrin (MßCD) /Hydroxy propyl beta cyclodextrin (HPßCD) and L-Arginine (ARG)/ Lysine (LYS) are analyzed by dissolution testing and phase stability study along with their complexation efficacy and solubility constants made by physical mixing. Inclusion complexes with ARG were better than LYS and prepared by solvent evaporation and lyophilization method as well. They are characterized by Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (AT-FTIR), X-ray powder diffractometry (XRD), Differential Scanning Calorimetry (DSC), Scanning electron microscopy (SEM) and Thermal gravimetric analysis (TGA). The bond shifting in AT-FTIR confirmed the molecular interactions between host and guest molecules. The SEM images also confirmed a complete change of drug morphology in case of ternary inclusion complexes prepared by lyophilization method for both the polymers. ARI: MßCD: ARG when used in the specific molar ratio of 1:1:0.27 by prepared by lyophilization method has 18 times best solubility while ARI:HPßCD:ARG was 7 times best solubility than pure drug making MßCD a better choice than HPßCD. Change in the molar ratio will cause loss of stability or solubility. Solvent evaporation gave significant level of solubility but less stability.

Development of immediate-release formulation with reliable absorption of rivaroxaban in various meal regimes.

The bioavailability of rivaroxaban at the higher doses (15 and 20 mg) is considerably reduced when the drug is administered on an empty stomach. This can lead to inadequate anticoagulant effect, and therefore, it is recommended to use the higher doses at fed state. However, proper posology may represent a barrier for some patients. Therefore, the aim of this study was to evaluate innovative rivaroxaban-containing formulations designed to eliminate the food effect to ensure reliable absorption and thus to improve patient adherence with the treatment. Three prototypes (Cocrystal, HPMCP and Kollidon) with rivaroxaban were developed and their bioavailability and food effect in comparison to the reference product was tested in open label, randomized, single oral dose, crossover studies, where test products were administered under fasting and fed conditions and the reference product was administered under fed conditions. Comparable bioavailability for all tested prototypes both under fed and fasting conditions was demonstrated as the 90% confidence intervals of the geometric mean ratios for area under the concentration-time curve remained within the standard acceptance range of 80.00%-125.00%. An innovative immediate release form of rivaroxaban with no food effect on drug bioavailability has been developed, which may represent an important step toward increasing adherence, improving treatment outcome and reducing health care costs.

Improving physicochemical characteristics and cytotoxicity of baicalin esters by liposome encapsulation.

The instability of ester bonds, low water solubility, and increased cytotoxicity of flavonoid glycoside esters significantly limit their application in the food industry. Therefore, the present study attempted to resolve these issues through liposome encapsulation. The results showed that baicalin butyl ester (BEC4) and octyl ester (BEC8) have higher encapsulation and loading efficiencies and lower leakage rate from liposomes than baicalin. FTIR results revealed the location of BEC4 and BEC8 in the hydrophobic layer of liposomes, which was different from baicalin. Additionally, liposome encapsulation improved the water solubility and stability of BEC4 and BEC8 in the digestive system and PBS but significantly reduced their cytotoxicity. Furthermore, the release rate of BEC4 and BEC8 from liposomes was lower than that of baicalin during gastrointestinal digestion. These results indicate that liposome encapsulation alleviated the negative effects of fatty chain introduction into flavonoid glycosides.

Quality by Design Perspective for Designing Foam-based Formulation: Current State of Art.

Foam-based delivery systems contain one or more active ingredients and dispersed solid or liquid components that transform into gaseous form when the valve is actuated. Foams are an attractive and effective delivery approach for medical, cosmetic, and pharmaceutical uses. The foams-based delivery systems are gaining attention due to ease of application as they allow direct application onto the affected area of skin without using any applicator or finger, hence increasing the compliance and satisfaction of the patients. In order to develop foam-based delivery systems with desired qualities, it is vital to understand which type of material and process parameters impact the quality features of foams and which methodologies may be utilized to investigate foams. For this purpose, Quality-by-Design (QbD) approach is used. It aids in achieving quality-based development during the development process by employing the QbD concept. The critical material attributes (CMAs) and critical process parameters (CPPs) were discovered through the first risk assessment to ensure the requisite critical quality attributes (CQAs). During the initial risk assessment, the high-risk CQAs were identified, which affect the foam characteristics. In this review, the authors discussed the various CMAs, CPPs, CQAs, and risk factors associated in order to develop an ideal foam-based formulation with desired characteristics.