Physiologically based pharmacokinetic modeling for development and applications of a virtual celiac disease population using felodipine as a model drug.

In celiac disease (CeD), gastrointestinal CYP3A4 abundance and morphology is affected by the severity of disease. Therefore, exposure to CYP3A4 substrates and extent of drug interactions is altered. A physiologically-based pharmacokinetic (PBPK) population for different severities of CeD was developed. Gastrointestinal physiology parameters, such as luminal pH, transit times, morphology, P-gp, and CYP3A4 expression were included in development of the CeD population. Data on physiological difference between healthy and CeD subjects were incorporated into the model as the ratio of celiac to healthy. A PBPK model was developed and verified for felodipine extended-release tablet in healthy volunteers (HVs) and then utilized to verify the CeD populations. Plasma concentration-time profile and PK parameters were predicted and compared against those observed in both groups. Sensitivity analysis was carried out on key system parameters in CeD to understand their impact on drug exposure. For felodipine, the predicted mean concentration-time profiles and 5th and 95th percentile intervals captured the observed profile and variability in the HV and CeD populations. Predicted and observed clearance was 56.9 versus 56.1 (L/h) in HVs. Predicted versus observed mean ± SD area under the curve for extended release felodipine in different severities of CeD were values of 14.5 ± 9.6 versus 14.4 ± 2.1, 14.6 ± 9.0 versus 17.2 ± 2.8, and 28.1 ± 13.5 versus 25.7 ± 5.0 (ng.h/mL), respectively. Accounting for physiology differences in a CeD population accurately predicted the PK of felodipine. The developed CeD population can be applied for determining the drug concentration of CYP3A substrates in the gut as well as for systemic levels, and for application in drug-drug interaction studies.

Impact of Simulated Intestinal Fluids on Dissolution, Solution Chemistry, and Membrane Transport of Amorphous Multidrug Formulations.

The solution behavior and membrane transport of multidrug formulations were herein investigated in a biorelevant medium simulating fasted conditions. Amorphous multidrug formulations were prepared by the solvent evaporation method. Combinations of atazanavir (ATV) and ritonavir (RTV) and felodipine (FDN) and indapamide (IPM) were prepared and stabilized by a polymer for studying their dissolution (under non-sink conditions) and membrane transport in fasted state simulated intestinal fluid (FaSSIF). The micellar solubilization by FaSSIF enhanced the amorphous solubility of the drugs to different extents. Similar to buffer, the maximum achievable concentration of drugs in combination was reduced in FaSSIF, but the extent of reduction was affected by the degree of FaSSIF solubilization. Dissolution studies of ATV and IPM revealed that the amorphous solubility of these two drugs was not affected by FaSSIF solubilization. In contrast, RTV was significantly affected by FaSSIF solubilization with a 30% reduction in the maximum achievable concentration upon combination to ATV, compared to 50% reduction in buffer. This positive deviation by FaSSIF solubilization was not reflected in the mass transport-time profiles. Interestingly, FDN concentrations remain constant until the amount of IPM added was over 1000 µg/mL. No decrease in the membrane transport of FDN was observed for a 1:1 M ratio of FDN-IPM combination. This study demonstrates the importance of studying amorphous multidrug formulations under physiologically relevant conditions to obtain insights into the performance of these formulations after oral administration.

Insights into the ameliorating ability of mesoporous silica in modulating drug release in ternary amorphous solid dispersion prepared by hot melt extrusion.

In this work, the application of various mesoporous silica grades in the preparation of stabilized ternary amorphous solid dispersions of Felodipine using hot melt extrusion was explored. We have demonstrated the effectiveness of mesoporous silica in these dispersions without the need for any organic solvents i.e., no pre-loading or immersion steps required. The physical and chemical properties, release profiles of the prepared formulations and the surface concentrations of the various molecular species were investigated in detail. Formulations containing 25 wt% and 50 wt% of Felodipine demonstrated enhanced stability and solubility of the drug substance compared to its crystalline counterpart. Based on the Higuchi model, ternary formulations exhibited a 2-step or 3-step release pattern which can be ascribed to the release of drug molecules from the organic polymer matrix and the external silica surface, followed by a release from the silica pore structure. According to the Korsmeyer-Peppas model, the release rate and release mechanism are governed by a complex quasi-Fickian release mechanism, in which multiple release mechanisms are occurring concurrently and consequently. Stability studies indicated that after 6 months storage of all formulation at 30% RH and 20 °C, Felodipine in all formulations remained stable in its amorphous state except for the formulation comprised of 40 wt% Syloid AL-1FP with a 50 wt% drug load.

Insights into Dissolution and Solution Chemistry of Multidrug Formulations of Antihypertensive Drugs.

Using fixed dose combinations of drugs instead of administering drugs separately can be beneficial for both patients and the health care system, but the current understanding of how multidrug formulations work at the molecular level is still in its infancy. Here, we explore dissolution, solubility, and supersaturation of various drug combinations in amorphous formulations. The effect of chemical structural similarity on combination behavior was investigated by using structurally related compounds of both drugs. The effect of polymer type on solution behavior was also evaluated using chemically diverse polymers. Indapamide (IPM) concentration decreased when combined with felodipine (FDN) or its analogues, which occurred even when the IPM solution was undersaturated. The extent of solubility decrease of FDN was less than that of IPM from the dissolution of an equimolar formulation of the drugs. No significant solubility decrease was observed for FDN at low contents of IPM which was also observed for other dihydropyridines, whereas FDN decreases at high contents of IPM. This was explained by the complex nature of the colloidal precipitates of the combinations which impacts the chemical potential of the drugs in solution at different levels. The maximum achievable concentration of FDN and IPM during dissolution of the polyvinylpyrrolidone-based amorphous solid dispersion was higher than the value measured with the hydroxypropyl methylcellulose acetate succinate-based formulation. This emphasizes the significance of molecular properties and chemical diversity of drugs and polymers on solution chemistry and solubility profiles. These findings may apply to drugs administered as a single dosage form or in separate dosage forms and hence need to be well controlled to assure effective treatments and patient safety.

Unconventional Passive Enhancement of Transdermal Drug Delivery: toward a Mechanistic Understanding of Penetration Enhancers Releasing from Acrylic Pressure-Sensitive Adhesive of Patches.

PURPOSE: Penetration enhancers (PEs) enhancing efficacy depends on two processes: PEs release from patches and action on skin. Compared with their action on skin, PEs release process was poorly understood. Therefore, the purpose of this study was to make a mechanistic understanding of PEs release from acrylic pressure-sensitive adhesive of patches and propose an unconventional enhancement of PEs efficacy. METHODS: PEs efficacy was evaluated both in drug permeation study and drug pharmacokinetic study. Confocal Raman spectroscopy was employed to observe PEs release behavior by mapping PEs dynamic distribution in skin. The mechanism of PEs release behavior was provided from molecular interaction and rheology using FT-IR, molecular docking, molecular dynamic simulation and rheometer, separately. RESULTS: The release behavior of PEs themselves greatly restricted their efficacy. By using PEG 400, an improvement of oleic acid (OA) release behavior was achieved, and the efficacy of OA was significantly enhanced with enhancing ratio (ER) from 2.69 to 4.10 and AUClast from 1574 ± 87 to 2664 ± 249 ng·h/mL, separately. The improvement of OA release behavior was primarily resulted from reduction of the interaction between OA and adhesive, which was caused by other small molecules with a strong ability in forming hydrogen bonds with adhesive. Also, the rigidity of adhesive was a factor in affecting PEs release behavior. CONCLUSIONS: An unconventional passive enhancement of transdermal drug delivery was achieved via improving PEs themselves releasing from acrylic pressure-sensitive adhesive. Graphical abstract Influence of PEs release behavior on drug permeation through skin and molecular mechanism.

The preparation of felodipine/zein amorphous solid dispersions and in vitro evaluation using a dynamic gastrointestinal system.

ABSTRCT Felodipine has been widely used as a poorly water-soluble model drug for various studies to improve its oral bioavailability and in vivo efficacy. In this study, we developed amorphous solid dispersions (ASDs) via spray drying to enhance the bioavailability of felodipine through using natural zein protein as a novel polymeric excipient. The solid state characterization results demonstrated a single glass transition temperature (Tg ) around 128.6 °C and good physical stability post 3 months accelerated study under the condition of 40 °C and 75% relative humidity (RH), which is possibly accounted for the molecular immobilization and hydrogen bonding interactions between felodipine and zein. By combining the in vitro dissolution study with TIM-1 gastrointestinal simulation investigation, it is indicated that felodipine was rapidly released from the ASD in 30 mins, and the supersaturation of felodipine was well maintained over 6 h, which resulted in a significant enhancement of felodipine bioavailability during simulated digestive processes in the upper GI tract. This study suggests that spray drying combined with natural excipient zein is an efficient formulation strategy for the development of ASDs with enhanced aqueous solubility and bioavailability.

Enhanced Oral Bioavailability of Felodipine from Solid Lipid Nanoparticles Prepared Through Effervescent Dispersion Technique.

Felodipine (FLD), a dihydropyridine calcium channel blocker with excellent antihypertensive effect, is poorly soluble and undergoes extensive hepatic metabolism, which lead to poor oral bioavailability (about 15%) and limit its clinic application. The goal of this study was to develop solid lipid nanoparticles (SLNs) loading FLD to improve the oral bioavailability. The FLD loaded solid lipid nanoparticles (FLD-SLNs) were prepared by the effervescent dispersion technique developed by our laboratory, which might have some advantages over traditional methods. The FLD-SLNs showed desired particle characteristics with particle size (198.15 ± 1.82 nm), poly dispersity index (0.26 ± 0.02), zeta-potential (- 25.53 ± 0.60 mV), entrapment efficiency (95.65 ± 0.70%), drug loading (2.33 ± 0.10%), and a spherical appearance. Pharmacokinetic results showed that the FLD-SLNs presented 3.17-fold increase in area under the curve (AUC(0-t)) compared with free FLD after oral administration in beagle dogs, which indicated that SLNs prepared using the effervescent dispersion technique can improve the bioavailability of lipophilic drugs like felodipine by enhancement of absorption and reduction first-pass metabolism.

Severity of coeliac disease and clinical management study when using a CYP3A4 metabolised medication: a phase I pharmacokinetic study.

OBJECTIVE: Severity of coeliac disease depends in part on the extent of small intestinal mucosa injury. Patients with the most abnormal pathology have loss of duodenal villi CYP3A4, a drug-metabolising enzyme that inactivates many drugs. These patients are hypothesised to have greater systemic concentrations of felodipine, a drug which normally has low oral bioavailability secondary to intestinal CYP3A4-mediated metabolism. It serves as a representative for a class containing many medications. DESIGN: A phase I, open-label, single-dose, pharmacokinetic study. SETTING: London, Ontario, Canada. PARTICIPANTS: Patients with coeliac disease (n=47) with positive serology and healthy individuals (n=68). MAIN OUTCOME MEASURES: Patients with coeliac disease-upper gastrointestinal endoscopy and oral felodipine pharmacokinetics study within a 3-week period. Healthy individuals-oral felodipine pharmacokinetics study with water and grapefruit juice. RESULTS: Coeliac stratification categories: Group A (n=15, normal), B+C (n=16, intraepithelial lymphocytosis with/without mild villous blunting) and D (n=16, moderate/severe villous blunting). Groups A, B+C and D had linear trends of increasing felodipine AUC0-8; mean±SEM, 14.4±2.1, 17.6±2.8, 25.7±5.0; p<0.05) and Cmax (3.5±0.5, 4.0±0.6, 6.4±1.1; p<0.02), respectively. Healthy subjects receiving water had lower felodipine AUC0-8 (11.9±0.9 vs 26.9±0.9, p=0.0001) and Cmax (2.9±0.2 vs 7.7±0.2, p=0.0001) relative to those receiving grapefruit juice. CONCLUSIONS: Increased felodipine concentrations in patients with coeliac disease were most probably secondary to decreased small intestinal CYP3A4 expression. Patients with severe coeliac disease and healthy individuals with grapefruit juice had equivalently enhanced effect. Thus, patients with severe coeliac disease would probably experience similarly altered drug response, including overdose toxicity, from many important medications known to be metabolised by CYP3A4. Patients with coeliac disease with severe disease should be considered for other clinical drug management, particularly when there is the potential for serious drug toxicity.

Bile acid transporter mediated STC/Soluplus self-assembled hybrid nanoparticles for enhancing the oral drug bioavailability.

The nano-particulate system for oral delivery faces a big challenge across the gastrointestinal bio-barriers. The aim was to explore the potential applications of bile acid transporter mediated the self-assembled hybrid nanoparticles (SHNPs) of sodium taurocholate (STC) and polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol (Soluplus) for augmenting the oral delivery of poorly water-soluble drugs. Felodipine (FLDP) was chosen as a model drug. The self-assembly of STC with Soluplus to load FLDP and the microstructure of the SHNPs were confirmed using molecular simulation, STC determination by high performance liquid chromatography (HPLC) and transmission electron microscope. Results showed that STC was integrated with Soluplus on the surface of nanoparticles by hydrophobic interactions. The permeability of FLDP loaded STC/Soluplus SHNPs was STC dependent in the ileum, which was inhibited by the higher concentrations of STC and the inhibitor of apical sodium-dependent bile acid transporter (ASBT). STC/Soluplus (1:9) SHNPs significantly improved the drug loading of FLDP, achieved the highest permeability of FLDP and realized 1.6-fold of the area under the curve (AUC) of Soluplus self-assembled nanoparticles (SNPs). A water-quenching fluorescent probe P4 was loaded into the STC/Soluplus SHNPs, which verified that the SHNPs were transferred intactly across the ileum. In conclusion, STC/Soluplus SHNPs via ASBT are a potential strategy for enhancing the oral bioavailability of poorly water-soluble drugs.

[Felodipine distribution in organisms of warm-blooded animals]. / Raspredelenie felodipina v organizme teplokrovnykh zhivotnykh.

The objective of the work was to study felodipine distribution in warm-blooded animals (rats). The methods of TLC, GC-MS, and UV spectrophotometry were used in the experiments. A lethal dose of felodipine (1.05 g/kg) preliminary suspended in water was introduced intragastric into test animals (male rats of the Wistar line). The analyzed compound was isolated from solid tissues and blood of the animals with acetone, purified by the solvent replacement, and by macrocolumn chromatography with the Silasorb S-18 sorbent of 30 µm and polar eluent, acetonitrile-water (7:3). The analyte was identified by chromatographic behavior in a thin sorbent layer, retention time, and a set of positive ions in its mass spectrum, as well as by the UV spectrum. The analyte was quantitatively detected in biological matrices using UV spectrophotometry. The method was validated by the criteria of linearity, selectivity, accuracy, precision, limits of detection, and quantitative determination. The predominant content of felodipine was detected in tissues of the stomach (312.303±25.980 µg/g), small intestine with its contents (93.235±12.310 µg/g), stomach contents (80.072±8.510 µg/g), and in the spleen (26.083±1.758 µg/g).

An in vitro dissolution-digestion-permeation assay for the study of advanced drug delivery systems.

Advanced drug delivery systems (ADDS) are widely explored to overcome poor aqueous solubility of orally administered drugs. However, the prediction of their in vivo performance is challenging, as in vitro models typically do not capture the interplay between processes occurring in the gut. In additions, different models are used to evaluate the different systems. We therefore present a method that allows monitoring of luminal processing (dissolution, digestion) and its interplay with permeation to better inform on the absorption of felodipine formulated as ADDS. Experiments were performed in a µFLUX-apparatus, consisting of two chambers, representing the intestinal and serosal compartment, separated by Caco-2 monolayers. During dissolution-digestion-permeation experiments, ADDS were added to the donor compartment containing simulated intestinal fluid and immobilized lipase. Dissolution and permeation in both compartments were monitored using in situ UV-probes or, when turbidity interfered the measurements, with HPLC analysis. The method showed that all ADDS increased donor and receiver concentrations compared to the condition using crystalline felodipine. A poor correlation between the compartments indicated the need for an serosal compartment to evaluate drug absorption from ADDS. The method enables medium-throughput assessment of: (i) dynamic processes occurring in the small intestine, and (ii) drug concentrations in real-time.

A Novel Micron-Size Particulate Formulation of Felodipine with Improved Release and Enhanced Oral Bioavailability Fabricated by Coaxial Electrospray.

The antihypertensive drug felodipine (FD) is a typical biopharmaceutics classification system (BCS) II drug; thus, improving the dissolution rate of FD is very important to enhance its bioavailability. Besides, according to the in situ "close loop" perfusion assay, we found that the jejunum is the main absorptive site, then the duodenum and ileum. Consequently, a novel micron-size particulate of FD in a core-shell structure was fabricated by a coaxial electrospray technique; within the drug delivery system, Hypromellose K4M (HPMC K4M) was selected as a sheath material to prolong the retention time in the upper GI tract, while povidone K30 (PVP K30) was mixed with FD in the inner layer. The dissolution study in three different media (0.02% Tween-80 solution; phosphate buffer containing 0.02% Tween-80, pH 6.8; and HCl solution containing 0.02% Tween-80, pH 1.2) demonstrated that FD-loaded coaxial electrospray particles (F-COES) could greatly improve the dissolution of FD. Furthermore, in vivo pharmacokinetics revealed that F-COES emerged no changes in the half-life but significantly prolonged the tmax and increased the oral bioavailability. Collectively, this work supplies a promising drug release system that will improve the dissolution and enhance the bioavailability simultaneously for those poorly water-soluble drugs mainly absorbed in the upper GI tract.

Validated RP-HPLC method for quantification of felodipine in rabbit plasma: Application in a bioequivalence study.

OBJECTIVE: The aim of present study was to develop a simple, rapid, selective, sensitive and robust reverse phase high performance liquid chromatographic method for quantification of felodipine in rabbit plasma at the wavelength of 360nm. METHOD: Protein was precipitated from rabbit plasma sample by addition of acetonitrile as a vehicle. An isocratic elution of samples was performed on capcell pak C8 DD S5 column (4.6mm×250mm particle size 5µm) column with mobile phase consisting 5mM Phosphate Buffer (pH 4.8 adjusted with dilute ortho-phosphoric acid solution): acetonitrile (25:75:v/v) delivered at flow rate 1.0mLmin-1. RESULT: A good linear response was achieved over the range of 0.25-20.00µgmL-1. LODs and LOQs for felodipine were found to be 0.055 and 0.201µgmL-1, respectively. The method was quantitatively evaluated in terms of linearity, precision, accuracy (recovery), selectivity robustness and stability study as per standard guidelines. The validated RP-HPLC method was successfully applied for the bioavailability studies of felodipine. The pharmacokinetic parameters were calculated for all the investigated drugs in rabbit after single-dose administrations of pure drug and formulation of felodipine. Finally, the obtained results for the application of the proposed RP-HPLC method proved its efficiency to be applied to the therapeutic drug monitoring (TDM) and bioequivalence (BE) studies. CONCLUSION: Thus, developed method is simple, convenient and suitable for the analysis of felodipine in bulk and pharmaceutical formulations.

Bottom-Up and Top-Down Approaches to Explore Sodium Dodecyl Sulfate and Soluplus on the Crystallization Inhibition and Dissolution of Felodipine Extrudates.

The objectives of this study were to explore sodium dodecyl sulfate (SDS) and Soluplus on the crystallization inhibition and dissolution of felodipine (FLDP) extrudates by bottom-up and top-down approaches. FLDP extrudates with Soluplus and SDS were prepared by hot melt extrusion, and characterized by polarized light microscopy, differential scanning calorimetry, and fourier transform infrared spectroscopy. Results indicated that Soluplus inhibited FLDP crystallization, and the whole amorphous solid dispersions (ASDs) were binary FLDP-Soluplus (1:3) and ternary FLDP-Soluplus-SDS (1:2:0.15∼0.3 and 1:3:0.2∼0.4) extrudates. Internal SDS (5%-10%) decreased glass transition temperatures of FLDP-Soluplus-SDS ternary ASDs without presenting molecular interactions with FLDP or Soluplus. The enhanced dissolution rate of binary or ternary Soluplus-rich ASDs in the nonsink condition of 0.05% SDS was achieved. Bottom-up approach indicated that Soluplus was a much stronger crystal inhibitor to the supersaturated FLDP in solutions than SDS. Top-down approach demonstrated that SDS enhanced the dissolution of Soluplus-rich ASDs via wettability and complexation with Soluplus to accelerate the medium uptake and erosion kinetics of extrudates, but induced FLDP recrystallization and resulted in incomplete dissolution of FLDP-rich extrudates. In conclusion, top-down approach is a promising strategy to explore the mechanisms of ASDs' dissolution, and small amount of SDS enhances the dissolution rate of polymer-rich ASDs in the nonsink condition.

Polymer blends used to develop felodipine-loaded hollow microspheres for improved oral bioavailability.

Felodipine (FD) has been widely used in anti-hypertensive treatment. However, it has extremely low aqueous solubility and poor bioavailability. To address these problems, FD hollow microspheres as multiple-unit dosage forms were synthesized by a solvent diffusion evaporation method. Particle size of the hollow microspheres, types of ethylcellulose (EC), amounts of EC, polyvinyl pyrrolidone (PVP) and FD were investigated based on an orthogonal experiment of three factors and three levels. In addition, the release kinetics in vitro and pharmacokinetics in beagle dogs of the optimized FD hollow microspheres was investigated and compared with Plendil (commercial FD sustained-release tablets) as a single-unit dosage form. Results showed that the optimal formulation was composed of EC10 cp:PVP:FD (0.9:0.16:0.36, w/w). The FD hollow microspheres were globular with a hollow structure and have high drug loading (17.69±0.44%) and floating rate (93.82±4.05%) in simulated human gastric fluid after 24h. Pharmacokinetic data showed that FD hollow microspheres exhibited sustained-release behavior and significantly improved relative bioavailability of FD compared with the control. Pharmacodynamic study showed that the FD hollow microspheres could effectively lower blood pressure. Therefore, these findings demonstrated that the hollow microspheres were an effective sustained-release delivery system for FD.

Assessment of improved buccal permeation and bioavailability of felodipine microemulsion-based cross-linked polycarbophil gel.

The oral bioavailability of felodipine (FEL) is very low, i.e., about 15%. This could be due to low water solubility and hepatic first-pass effect. The objective of the present study was to develop FEL microemulsion-based gel, to bypass the first pass effect, for buccal delivery. The optimized FEL microemulsion (OPT-MEF) was used to prepare buccoadhesive gels, with varying concentrations of hydroxypropyl methylcellulose (HPMC) E4M and polycarbophil (PCP), and evaluated. The cross-linking of the PCP gelling agent was done by adjusting the pH with a neutralizing agent, triethanolamine (TEA). The formulations, namely drug suspension, OPT-MEF, microemulsion-based buccal gel containing 1% w/v (MEF-E4M1), 2% w/v (MEF-E4M2), and 3% w/v (MEF-E4M3) of HPMC K4M and 1% w/v (MEF-PCP1), 2% w/v (MEF-PCP2), and 3% w/v (MEF-PCP3) of PCP were prepared and optimized on the basis of ex vivo permeation study, mucoadhesion force, and viscosity. The optimized buccal gel (MEF-PCP1) showed significantly higher (p < 0.01) permeation flux (J = 0.44 ± 0.16 mg/cm2/h), when compared with the drug suspension (J = 0.17 ± 0.14 mg/cm2/h). The permeation enhancement ratio of MEF-PCP1 was found to be 2.59 times higher than that of the aqueous suspension of the drug. The texture profile analysis of MEF-PCP1 was performed which showed spreadability (3.2 mJ), extrudability (151.8 mJ), hardness (13.8 g), and adhesiveness (41.0 g), and results indicated good spreadability and adhesiveness. The rheological study revealed the pseudoplastic flow behavior of MEF-PCP1 buccal gel. The Cmax value 9.21 ± 2.88 µg/ml of MEF-PCP1 gel was found to be significantly higher (P < 0.01) compared to the same dose administered by oral route (Cmax value 3.51 ± 1.74 µg/ml). The relative bioavailability (Fr) of the optimized MEF-PCP1 buccal gel was about 397.39% higher than that of oral route. In conclusion, consistent and effective buccal gel containing optimized FEL-loaded microemulsion, with improved buccal permeation and pharmacokinetic parameters was developed successfully to improve the bioavailability of FEL.

Melt extrusion process for adjusting drug release of poorly water soluble drug felodipine using different polymer matrices.

The purpose of the present study was to use commercial available polymers like PVP/PEG, soluplus® and kollidon® SR to prepare immediate and sustained release formulations of felodipine by hot melt mixing method. Solid dispersions containing 5, 10, 20 and 30wt% drug have been prepared in a Haake-Buchler Reomixer at melt temperature 130°C and mixing time 10min. As was found from DSC and XDR studies completely amorphous and miscible solid dispersions can be prepared. In all cases a single glass transition was recorded, which is depended from the used drug amount. Hydrogen bonds and the molecular interaction between felodipine and polymer matrices are responsible for the miscibility of prepared formulations. This has as result the substantial enhancement of felodipine release rate in PVP/PEG mixture and due to the high solubility of used polymers immediate release formulations have been prepared. On the contrary, sustained release formulations can be prepared in the case of kollidon SR solid dispersions. The release mechanism of all preparations was studied using different kinetic models. Finally, binding affinity values calculated by molecular docking simulations were used as estimators for predicting long-term drug's physical stability in solid dispersions.

Augmented bioavailability of felodipine through an α-linolenic acid-based microemulsion.

The oral bioavailability of felodipine, a dihydropyridine calcium channel antagonist, is about 15%. This may be due to poor water solubility, and a lower intestinal permeability than a BCS class I drug, and hepatic first-pass metabolism of the drug. Many drugs are unpopular due to solubility issues. The goal of this study was to develop and optimize a felodipine-containing microemulsion to improve the intestinal permeability and bioavailability of the drug. The felodipine microemulsions were developed with the selected components, i.e., α-linolenic acid as the oil phase, Tween 80 as a surfactant, and isopropyl alcohol as co-surfactant using Box-Behnken design and characterized for in vitro release and particle size. The optimized felodipine-loaded microemulsion was investigated for physicochemical interaction, surface morphology, intestinal permeability, rheology, cytotoxicity, cellular uptake, pharmacodynamic (electrocardiogram and heart rate variability), and pharmacokinetic studies to explore its suitability as a promising oral drug delivery system for the treatment of hypertension. The optimized felodipine-loaded microemulsion showed significantly higher (P < 0.05) apparent permeability coefficients (Papp) at 7.918 × 10-5 cm/s after 1 h, when compared with conventional formulations that are marketed tablet, drug oily solution, and drug emulsion, which showed a maximum Papp of 3.013, 4.428, and 5.335 × 10-5 cm/s, respectively. The optimized felodipine-loaded microemulsion showed biocompatibility and no cytotoxicity. Cellular uptake studies confirmed payload delivery to a cellular site on the J774.A1 cell line. The rheology study of the optimized felodipine-loaded microemulsion revealed Newtonian-type flow behavior and discontinuous microemulsion formation. In pharmacodynamic studies, significant differences in parameters were observed between the optimized felodipine-loaded microemulsion and marketed formulation. The optimized felodipine-loaded microemulsion showed significantly higher (p < 0.01) C max (7.12 ± 1.04 µg/ml) than marketed tablets (2.44 ± 1.03 µg/ml). It was found that AUClast obtained from the optimized felodipine-loaded microemulsion (84.53 ± 10.73 µg h/ml) was significantly higher (p < 0.01) than the marketed tablet (27.41 ± 5.54 µg h/ml). The relative bioavailability (Fr) of the optimized felodipine-loaded microemulsion was about 308.3% higher than that of the marketed formulation. The results demonstrate that the prepared microemulsion is an advanced and efficient oral delivery system of felodipine for the management of hypertension.

Coffee inhibition of CYP3A4 in vitro was not translated to a grapefruit-like pharmacokinetic interaction clinically.

Grapefruit can augment oral medication bioavailability through irreversible (mechanism-based) inhibition of intestinal CYP3A4. Supplementary data from our recent coffee-drug interaction clinical study showed some subjects had higher area under the plasma drug concentration - time curve (AUC) and plasma peak drug concentration (Cmax) of the CYP3A4 probe felodipine compared to aqueous control. It was hypothesized that coffee might interact like grapefruit in responsive individuals. Beans from six geographical locations were consistently brewed into coffee that was separated chromatographically to a methanolic fraction for in vitro inhibition testing of CYP3A4 metabolism of felodipine at 1% coffee strength. The effect of simultaneous incubation and 10-min preincubation with coffee fractions determined whether coffee had direct and mechanism-based inhibitory activity. A subsequent five-way randomized balanced controlled crossover clinical study evaluated the clinical pharmacokinetic interaction with single-dose felodipine. Grapefruit juice, water, or three of the in vitro tested coffees were ingested at 300 mL alone 1 h before and then with felodipine. In vitro, all six coffees decreased felodipine metabolism for both simultaneous and preincubation exposure compared to corresponding control. Five coffees demonstrated mechanism-based inhibition. Grapefruit increased felodipine AUC0-8 (25 vs. 13 ng.h/mL, P < 0.001) and Cmax (5.8 vs. 2.7 ng/mL, P < 0.001) and decreased dehydrofelodipine/felodipine AUC0-8 ratio (0.84 vs. 1.29, P < 0.001), while the three coffees caused no change in these parameters compared to water. Despite high in vitro potency of CYP3A4 inhibition, the coffees did not cause a clinical pharmacokinetic interaction possibly from insufficient amount of inhibitor(s) in coffee reaching intestinal CYP3A4 during the absorption phase of felodipine. The results of this study highlight the need for follow-up clinical testing when in vitro results indicate the possibility of an interaction.

Investigation of the Intra- and Interlaboratory Reproducibility of a Small Scale Standardized Supersaturation and Precipitation Method.

The high number of poorly water-soluble compounds in drug development has increased the need for enabling formulations to improve oral bioavailability. One frequently applied approach is to induce supersaturation at the absorptive site, e.g., the small intestine, increasing the amount of dissolved compound available for absorption. However, due to the stochastic nature of nucleation, supersaturating drug delivery systems may lead to inter- and intrapersonal variability. The ability to define a feasible range with respect to the supersaturation level is a crucial factor for a successful formulation. Therefore, an in vitro method is needed, from where the ability of a compound to supersaturate can be defined in a reproducible way. Hence, this study investigates the reproducibility of an in vitro small scale standardized supersaturation and precipitation method (SSPM). First an intralaboratory reproducibility study of felodipine was conducted, after which seven partners contributed with data for three model compounds; aprepitant, felodipine, and fenofibrate, to determine the interlaboratory reproducibility of the SSPM. The first part of the SSPM determines the apparent degrees of supersaturation (aDS) to investigate for each compound. Each partner independently determined the maximum possible aDS and induced 100, 87.5, 75, and 50% of their determined maximum possible aDS in the SSPM. The concentration-time profile of the supersaturation and following precipitation was obtained in order to determine the induction time (tind) for detectable precipitation. The data showed that the absolute values of tind and aDS were not directly comparable between partners, however, upon linearization of the data a reproducible rank ordering of the three model compounds was obtained based on the ß-value, which was defined as the slope of the ln(tind) versus ln(aDS)-2 plot. Linear regression of this plot showed that aprepitant had the highest ß-value, 15.1, while felodipine and fenofibrate had comparable ß-values, 4.0 and 4.3, respectively. Of the five partners contributing with full data sets, 80% could obtain the same rank order for the three model compounds using the SSPM (aprepitant > felodipine ≈ fenofibrate). The α-value is dependent on the experimental setup and can be used as a parameter to evaluate the uniformity of the data set. This study indicated that the SSPM was able to obtain the same rank order of the ß-value between partners and, thus, that the SSPM may be used to classify compounds depending on their supersaturation propensity.