Young bamboo flour as a substitute for emulsifying salts in requeijão cremoso processed cheese and the effect on the quality parameters.

The effect of the substitution of emulsifying salt by the young bamboo flour (BF) (0, 25, 50, 75, 100 % w/w) on requeijão cremoso processed cheese [REQ, REQ 25, REQ 75 REQ 100]) processing was investigated. Gross composition, calcium and sodium values, functional properties (melting rate), color parameters (L, a*, b*, C*, and Whiteness Index, WI), texture profile, fatty acid profile, volatile organic compounds (VOCs), and sensory profiling were evaluated. No effect was observed on the gross composition; however, sodium and melting rate values were decreased, and calcium values presented the opposite behavior. BF could modify the optical parameters, observing an increase in WI values. Higher BF addition increased hardness and lowered elasticity, and regarding the fatty acid profile, there is no significant difference. Different volatile compounds were noted in a proportional form with the BF addition, which was reflected in similar sensory acceptance for REQ 25 and control samples. Although some aspects require further in-depth studies, using BF as a substitute for emulsifying salt in requeijão cremoso processed cheese appears to be a viable option, especially when considering partial replacements.

[Highly sensitive detection of fluorescent whitening agents in flour using sheathless capillary electrophoresis-electrospray ionization-tandem mass spectrometry].

Fluorescent whitening agents (FWAs) are dyes that emit visible blue or blue-purple fluorescence upon ultraviolet-light absorption. Taking advantage of light complementarity, FWAs can compensate for the yellow color of many substances to achieve a whitening effect; thus, they are used extensively in various applications. FWAs are generally stable, but their presence in the environment can lead to pollution and accumulation in the body through the food chain. Recent studies have revealed that some types of FWAs, such as coumarin-based FWAs, may exhibit photo-induced mutagenic effects that can trigger allergic reactions in humans and even pose carcinogenic risks. Hence, the development of an accurate and highly sensitive method for detecting FWAs in food-related samples is a crucial endeavor. Owing to the high polarity and structural similarity of FWAs, the accurate determination of these substances in complex food samples requires an analytical method that offers both efficient separation and sensitive detection. Capillary electrophoresis (CE) exhibits essential features such as high separation efficiency, short analysis times, very small sample injection requirements, minimal use of organic solvents, and simple operation. Thus, it is often used as an effective alternative to liquid chromatographic techniques. Over the past few decades, electrospray ionization mass spectrometry (ESI-MS) has been utilized as a highly sensitive and accurate detection method in numerous chemical analytical fields because it enables the analysis of molecular structures. By combining the high separation efficiency of CE with the high sensitivity of ESI-MS, a powerful tool for identifying and quantifying trace amounts of FWAs in food samples may be obtained. In this study, we present a method based on sheathless CE coupled with electrospray ionization tandem mass spectrometry (ESI-MS/MS) for the simultaneous detection of six trace FWAs in flour. In the proposed method, the CE separation device is directly coupled to the mass spectrometer through a sheathless interface without the need for a sheath liquid for electric contact, thereby avoiding the dilution of the analytes and improving detection sensitivity. Various conditions that could affect extraction recovery, separation efficiency, and detection sensitivity were evaluated and optimized. The FWAs were effectively extracted from the sample matrix with reduced matrix effects by ultrasonic-assisted extraction at a temperature of 30 ℃ for 20 min using CHCl3-MeOH (3∶2, v/v) as the extraction solvent. The extract was centrifuged, dried under N2, and reconstituted in CHCl3-MeOH (1∶4, v/v) for subsequent analysis. During the detection process, the CE device was coupled to the ESI-MS/MS instrument via a highly sensitive porous spray needle, which served as the sheathless electrospray interface. The target FWAs were scanned in positive-ion mode (ESI+) to ensure the stability and intensity of the obtained signals. Additionally, multiple-reaction monitoring (MRM) mode and MS/MS analysis were used to simultaneously quantify the six targets with high selectivity. The developed sheathless CE-ESI-MS/MS method detected the FWAs with high sensitivity over wide linear ranges with low method limits of detection (0.04-0.67 ng/g). The recoveries of the six target FWAs at three spiked levels were between 77.5% and 97.2%, with good interday (RSD≤11.5%) and intraday (RSD≤10.2%) precision. Analyses of the six target FWAs in eight commercial flour samples were performed using this method, and four positive samples were identified. These results demonstrate that the proposed CE-ESI-MS/MS method is a promising strategy for the determination of trace FWAs in complex food sample matrices with efficient separation and high sensitivity.

Influence of fermentation conditions, and the blends of sorghum and carrot pulp supplementation on the nutritional and sensory quality of tef injera.

Tef [Eragrostis tef (Zucc.) Trotter], an ancient cereal primarily grown in Ethiopia, is becoming increasingly popular worldwide due to its high iron content and gluten-free nature. However, it has been reported that injera produced only with tef flour lack certain vital nutrients. Therefore, this specific study was conducted to supplement tef injera with other food materials of better nutritional value and compensate its expensive market price with sorghum cereal flour. The effect of fermentation conditions, and the sorghum and carrot pulp blending ratio on the nutritional value and sensory quality of tef injera was investigated. The factorial approach of the experimental design was conducted considering the nutritional value and sensory quality of the injera made of three main blending ratios of tef, sorghum, and carrot (60% tef: 30% sorghum: 10% carrot pulp, 45% tef: 45% sorghum: 10% carrot pulp and 30% tef: 60% sorghum: 10% carrot pulp) as experiential variables. The raw materials and injera were characterised for their proximate composition, physicochemical property, mineral composition, microbial analysis, and sensory attributes, using standard methods. The results of the study show that fermentation conditions and blending ratios have a significant effect on the nutritional, anti-nutritional, mineral content, microbial quality, and sensory properties of blended injera products, where higher values of ash, crude protein, crude fat, Total titratable acidity (TTA), Fe, Zn, and Ca (2.30%, 11.34%, 2.62%, 3.53, 32.97 mg/100 g, 2.98 mg/100 g and 176.85 mg/100 g, respectively) were analyzed for the co-fermented injera sample. In addition, a lower microbial count was observed in co-fermented injera samples, whereas microbial counts in injera samples prepared from carrot pulp-supplemented dough after the co-fermentation of tef and sorghum flours were observed to be higher. The injera product made using blending ratio of 60% tef: 30%sorghum: 10% carrot co-fermented was found to be the optimum result due to its very good nutritional improvement (i.e., reduction of some anti-nutritional factors, microbial contents, pH and increased contents of some minerals, crude protein, crude fat, TTA and improved most of the sensory quality of the supplemented injera product). According to this study, sorghum and carrot supplementation on tef could improve the nutritional value of injera while also providing an instant remedy for the growing price of tef.

Effect of defatted Lagenaria siceraria (Molina) Standley seed flour as a fat replacer on physicochemical, technological, and sensory properties of beef patty.

Defatted Lagenaria siceraria seed flour (DLSSF) was obtained from defatted seed cake, dried, and ground through a sieve of 500 µm and characterized. A 2 × 4 factorial design (two flour hydration rates and four fat substitution rates) was used to produce a low-fat beef patty by replacing fat with DLSSF. Beef kidney fat was used to formulate the control sample. Chemical, physical, technological, sensory, and nutritional characteristics of low-fat beef patties manufactured were evaluated. DLSSF contains mainly protein. As fat replacers, DLSSF induces a significant increase in the pH of the raw and cooked patty, the moisture and protein contents, the cooking yield, the cohesion, chewiness, springiness, and lightness of the cooked beef patty with fat substitution rate. There is a decrease in fat content, total calories, water retention capacity, hardness, and redness of the cooked patty with a fat substitution rate. From the sensory analysis, the substitution of fat improves the acceptability of samples. Based on the overall parameters analyzed, DLSSF containing 60% water can be used to produce low-fat beef patty by replacing fat at 100%. From these results, hydrated DLSSF could be an effective method to solve the problems of noncommunicable diseases related to animal fat consumption.

Non-invasive prediction of maca powder adulteration using a pocket-sized spectrophotometer and machine learning techniques.

Discriminating different cultivars of maca powder (MP) and detecting their authenticity after adulteration with potent adulterants such as maize and soy flour is a challenge that has not been studied with non-invasive techniques such as near infrared spectroscopy (NIRS). This study developed models to rapidly classify and predict 0, 10, 20, 30, 40, and 50% w/w of soybean and maize flour in red, black and yellow maca cultivars using a handheld spectrophotometer and chemometrics. Soy and maize adulteration of yellow MP was classified with better accuracy than in red MP, suggesting that red MP may be a more susceptible target for adulteration. Soy flour was discovered to be a more potent adulterant compared to maize flour. Using 18 different pretreatments, MP could be authenticated with R2CV in the range 0.91-0.95, RMSECV 6.81-9.16 g/,100 g and RPD 3.45-4.60. The results show the potential of NIRS for monitoring Maca quality.

Explaining the improving effect of dough crumb-sheet composite rolling on fresh noodle quality: From microstructure and moisture distribution perspective.

A new technique known as dough crumb-sheet composite rolling (DC-SCR) was used to improve the quality of fresh noodles. However, there is a dearth of theoretical investigations into the optimal selection of specific parameters for this technology, and the underlying mechanisms are not fully understood. Therefore, the effects of dough crumb addition times in DC-SCR on the texture, cooking, and eating quality of fresh noodles were first studied. Then, the underlying regulation mechanism of DC-SCR technology on fresh noodles was analyzed in terms of moisture distribution and microstructure. The study demonstrated that the most significant enhancement in the quality of fresh noodles was achieved by adding dough crumbs six times. Compared with fresh noodles made without the addition of dough crumbs, the initial hardness and chewiness of fresh noodles made by adding six times of dough crumbs increased by 25.32% and 46.82%, respectively. In contrast, the cooking time and cooking loss were reduced by 28.45% and 29.69%, respectively. This quality improvement in fresh noodles made by DC-SCR came from the microstructural differences of the gluten network between the inner and outer layers of the dough sheet. A dense structure on the outside and a loose structure on the inside could endow the fresh noodles made by DC-SCR with higher hardness, a shortened cooking time, and less cooking loss. This study would provide a theoretical and experimental basis for creating high-quality fresh noodles.

Enhancing the nutritional and bioactive benefits of faba bean flour by combining preprocessing and thermoplastic extrusion: A comprehensive study on digestion-resistant peptides.

This research assessed how three preprocessing techniques [soaking (S), soaking and reconstitution (SR), and soaking and dehulling (SD)] impact the protein digestibility and bioactivity of faba bean flours when combined with thermoplastic extrusion. Samples were compared against a control (C) of extruded faba bean flour without preprocessing. Applying preprocessing techniques followed by extrusion diminished antinutrient levels while enhancing protein hydrolysis and in vitro bioactivity in higher extent compared to C. Specifically, SD combined with extrusion was the most effective, achieving an 80% rate of protein hydrolysis and uniquely promoting the release of gastric digestion-resistant proteins (50-70 kDa). It also resulted in the highest release of small peptides (<3kDa, 22.51%) and free amino acids (15.50%) during intestinal digestion. Moreover, while all preprocessing techniques increased antioxidant (ABTS radical-scavenging), antidiabetic, and anti-hypertensive activities, SD extruded flour displayed the highest levels of dipeptidyl peptidase inhibition (DPP-IVi, IC50=13.20 µg/mL), pancreatic α-amylase inhibition (IC50=8.59 mg/mL), and angiotensin I-converting enzyme inhibition (ACEi, IC50=1.71 mg protein/mL). As a result, it was selected for further peptide and in silico bioactive analysis. A total of 24 bioactive peptides were identified in intestinal digests from SD extruded flour, all with potential DPP-IVi and ACEi activities, and six were also predicted as antioxidant peptides. VIPAGYPVAIK and GLTETWNPNHPEL were highlighted as resistant bioactive peptides with the highest antidiabetic and antioxidant potential. Our findings demonstrated that combining preprocessing (particularly SD) and thermoplastic extrusion enhances protein digestibility in faba beans and promotes the release of beneficial bioactive peptides in the intestine.

Exploring the relationship between starch structure and physicochemical properties: The impact of extrusion on highland barley flour.

Highland barley (HB) is an intriguing plateau cereal crop with high nutrition and health benefits. However, abundant dietary fiber and deficient gluten pose challenges to the processing and taste of whole HB products. Extrusion technology has been proved to be effective in overcoming these hurdles, but the association between the structure and physicochemical properties during extrusion remains inadequately unexplored. Therefore, this study aims to comprehensively understand the impact of extrusion conditions on the physicochemical properties of HB flour (HBF) and the multi-scale structure of starch. Results indicated that the nutritional value of HBF were significantly increased (soluble dietary fiber and ß-glucan increased by 24.05%, 19.85% respectively) after extrusion. Typical underlying mechanisms based on starch structure were established. High temperature facilitated starch gelatinization, resulting in double helices unwinding, amylose leaching, and starch-lipid complexes forming. These alterations enhanced the water absorption capacity, cold thickening ability, and peak viscosity of HBF. More V-type complexes impeded amylose rearrangement, thus enhancing resistance to retrogradation and thermal stability. Extrusion at high temperature and moisture exhibited similarities to hydrothermal treatment, partly promoting amylose rearrangement and enhancing HBF peak viscosity. Conversely, under low temperature and high moisture, well-swelled starch granules were easily broken into shorter branch-chains by higher shear force, which enhanced the instant solubility and retrogradation resistance of HBF as well as reduced its pasting viscosity and the capacity to form gel networks. Importantly, starch degradation products during this condition were experimentally confirmed from various aspects. This study provided some reference for profiting from extrusion for further development of HB functional food and "clean label" food additives.

Comprehensive identification and risk assessment of regulated and emerging mycotoxins in infant foods and related raw materials and risk management advice: A case study of an infant food company in China.

This study evaluated muti-mycotoxins in 199 samples including processed infant foods and raw materials collected randomly from an infant food company and assessed their role in dietary exposure in infants and young children via probabilistic risk assessment. Approximately 79.6 % (74/93) of the processed infant foods and 65.1 % (69/106) of the raw materials were contaminated by mycotoxins, with a mean occurrence level of 3.66-321.8 µg/kg. Deoxynivalenol (DON) and tenuazonic acid (TeA) were the more prevalent mycotoxins detected, based on their higher frequencies and levels across samples. Co-occurrence of more than two mycotoxins was detected in 61.3 % (57/93) of the processed infant foods and 53.8 % (57/106) of the raw materials. Wheat flour and derived products (e.g., infant noodles and infant biscuits) were contaminated with higher contamination levels and a greater variety of mycotoxins than other samples (e.g., infant cereal and rice grains). The estimated daily exposure to OTA, DON, ZEN, and TEN was lower than the corresponding reference health-based guidance values, indicating acceptable health risks. However, the estimated dietary exposure to alternariol monomethyl ether (AME), alternariol (AOH), and tenuazonic acid (TeA) exceeded the corresponding thresholds of toxicological concern values, indicating potential dietary intake risks. Among the various samples, cereals and cereal-based infant foods emerged as the primary contributors to mycotoxin exposure. Further research is advised to address the uncertainties surrounding the toxicity associated with emerging Alternaria mycotoxins and to conduct cumulative risk assessments concerning multiple mycotoxin exposure in infants and young children.

Heat-moisture treatment can modulate all-purpose wheat flour for short dough biscuit making: Evidences and mechanism.

In view of the merits of all-purpose wheat flour (APWF) to soft wheat flour (SWF) in cost and protein supply, the feasibility of heat-moisture treatment (HMT, 19% moisture for 1 h at 60, 80 and 100 °C, respectively) to modify APWF as a substitute SWF in making short dough biscuits was explored. For underlying mechanisms, on the one hand, HMT reduced the hydration capacity of damaged starch particles by coating them with denatured proteins. On the other hand, HMT at 80 °C and 100 °C significantly denatured gluten proteins to form protein aggregates, highly weakening the gluten network in dough. These two aspects jointly conferred APWF dough with higher deformability and therefore significantly improved the qualities of biscuits. Moreover, the qualities of biscuits from APWF upon HMT-100 °C were largely comparable to that from SWF, even higher values were concluded in spread ratio, volume, specific volume and consumer acceptance.

In Vitro Digestion of Polyphenolic Compounds and the Antioxidant Activity of Acorn Flour and Pasta Enriched with Acorn Flour.

Acorn flour is a rich source of nutrients and is beneficial to human health due to, among other things, its low glycemic index and polyphenol content. In order to obtain more accurate data on the levels and activities of the substances tested after ingestion and digestion, it may be beneficial to use a simulated in vitro digestion method. Therefore, the objective of the present study was to elucidate the content of polyphenols, individual phenolic acids, flavonoids and antiradical properties of acorn flour and pasta enriched with acorn flour before and after simulated in vitro gastrointestinal digestion. The results indicate that the total polyphenol content (TPC), flavonoid content and radical scavenging activity exhibited an increasing trend following the initial digestion stage and a decreasing trend following the second stage. Nevertheless, the levels of phenolic acids demonstrated an increase in both digestion phases. The digestion processes of polyphenols in acorn flour differ significantly from those in pasta. In the case of pasta, total polyphenols, phenolic acids and flavonoids, as well as free radical scavenging properties, demonstrated a decreasing trend following each digestion stage.

Biogenic amines as an indicator of rye leaven quality during production and storage.

Rye leaven, the basic constituent of sour rye soup ('zurek' or white borsch), was obtained through three methods of initiating lacto-fermentation of rye flour. Optimal concentrations of NaCl (1.5%) and garlic (0.5%) were selected by utilizing the response surface methodology. During the production and storage of leaven at 10 °C and 20 °C, the secalin proteins of rye flour degraded significantly and the concentration of free amino acids increased, making the rye leaven an environment potentially conducive to the formation of biogenic amines. Putrescine (max. conc: 116.7 mg kg-1) and tyramine (max. conc: 63.4 mg kg-1) were the amines that occurred in the largest amounts in the leavens. The final concentration of histamine (after 150 days of storage) did not exceed 22 mg kg-1. Regardless of the method of initiation of fermentation, the products that contained fewer biogenic amines better retained their sensory characteristics (r ≤ -0.89, p < 0.05) and had a higher number of lactic acid bacteria (r ≤ -0.66, p < 0.05).

Fluorescent and Colorimetric Dual-Readout Immunochromatographic Assay for the Detection of Phenamacril Residues in Agricultural Products.

The fungicide phenamacril has been employed to manage Fusarium and mycotoxins in crops, leading to persistent residues in the environment and plants. Detecting phenamacril is pivotal for ensuring environmental and food safety. In this study, haptens and artificial antigens were synthesized to produce antiphenamacril monoclonal antibodies (mAbs). Additionally, gold nanoparticles coated with a polydopamine shell were synthesized and conjugated with mAbs, inducing fluorescence quenching in quantum dots. Moreover, a dual-readout immunochromatographic assay that combines the positive signal from fluorescence with the negative signal from colorimetry was developed to enable sensitive and precise detection of phenamacril within 10 min, achieving detection limits of 5 ng/mL. The method's reliability was affirmed by using spiked wheat flour samples, achieving a limit of quantitation of 0.05 mg/kg. This analytical platform demonstrates high sensitivity, outstanding accuracy, and robust tolerance to matrix effects, making it suitable for the rapid, onsite, quantitative screening of phenamacril residues.

Expanding Fortification with Folic Acid: Thinking Outside the Cereal-Grain Box.

(1) Background: Fortifying maize and wheat flours with folic acid has effectively reduced neural tube defect-affected births. However, maize and wheat flours may not be widely consumed in all countries; further reduction in neural tube defect-affected births could benefit from the identification of alternative food vehicles. We aimed to use dietary intake or apparent consumption data to determine alternative food vehicles for large-scale fortification with folic acid in low-income and lower-middle-income countries (LILMICs) and identify current research related to examining the technological feasibility of fortifying alternative foods with folic acid. (2) Methods: We identified 81 LILMICs, defined by the World Bank's (WB) 2018 income classifications. To identify dietary intake or apparent consumption, we reviewed WB's Microdata Library and Global Health Data Exchange for national surveys from 1997-2018. We reviewed survey reports for dietary intake or apparent consumption data and analyzed survey datasets for population coverage of foods. We defined alternative food vehicles as those that may cover/be consumed by ≥30% of the population or households; cereal grains (maize and wheat flours and rice) were included as an alternative food vehicle if a country did not have existing mandatory fortification legislation. To identify current research on fortification with folic acid in foods other than cereal grains, we conducted a systematic review of published literature and unpublished theses, and screened for foods or food products. (3) Results: We extracted or analyzed data from 18 national surveys and countries. The alternative foods most represented in the surveys were oil (n = 16), sugar (n = 16), and salt (n = 14). The coverage of oil ranged from 33.2 to 95.7%, sugar from 32.2 to 98.4%, and salt from 49.8 to 99.9%. We found 34 eligible studies describing research on alternative foods. The most studied alternative foods for fortification with folic acid were dairy products (n = 10), salt (n = 6), and various fruit juices (n = 5). (4) Conclusions: Because of their high coverage, oil, sugar, and salt emerge as potential alternative foods for large-scale fortification with folic acid. However, except for salt, there are limited or no studies examining the technological feasibility of fortifying these foods with folic acid.

Nutritional composition, lipid profile and stability, antioxidant activities and sensory evaluation of pasta enriched by linseed flour and linseed oil.

Pasta assortments fortified with high quality foods are a modern nutritional trends. This study, explored the effects of fortification with linseed flour (LF) and linseed oil (LO) on durum wheat pasta characteristics. Wheat flour semolina was replaced with 5%, 10% and 15% of LF or 1%, 2.5% and 5% of LO. Control pasta CP (without LF or LO addition), LF-enriched pasta LFP 5%, LFP 10% and LFP 15% and LO-enriched pasta LOP 1%, LOP 2.5% and LOP 5% was compared for the proteins, fat and phenolic contents and fatty acids (FA) profile. Impact on lipid oxidation and sensory evaluation were also determined. Fortification of pasta with LF improved significantly (p < 0.05) the contents of protein, fat and phenolic compared to CP whereas the enrichment of pasta with LO resulted in a significant increase (p < 0.05) in the content of fat and a significant decrease in protein and phenolic contents. All the formulations decreased the saturated FA percent and increased the polyunsaturated FA percent with enhancement of omega-3 FA content. Antioxidant activity measured by FRAP and DPPH assays was improved after the fortification. For lipid oxidation, the replacement of semolina by LF or LO promoted an increase (p < 0.05) on TBARS values in level-dependent manner. Regarding sensory evaluation, the two types of fortification did not affect the taste; flavor and aroma of cooked pasta, but LOP 5% showed the highest score of the overall acceptability. The results recommended the possibility of producing pasta supplemented with LF or LO (even at a level of 15% and 5% respectively) as a functional food.

Glucomannan isolation from porang (Amorphophallus muelleri Blume) flour using natural deep eutectic solvents and ethanol: A comparative study.

Ethanol is a common solvent to isolate glucomannan from porang (Amorphophallus muelleri Blume) flour (NPF). This study investigated the use of natural deep eutectic solvents (NADESs) in glucomannan isolation from NPF. NADESs formed by the hydrogen bond acceptors (choline chloride and betaine) and the hydrogen bond donors (glycerol, 1,2-propanediol, formic acid, and acetic acid) in varying molar ratios of 1:2, 1:3, and 1:4 were characterized to optimize glucomannan isolation. The results showed that higher molar ratios of NADES tended to yield porang glucomannan flour (PGF) with higher glucomannan content and viscosity. The gel of PGF exhibited pseudoplastic behavior. The FTIR spectra indicated that betaine-based NADES removed the acetyl groups from glucomannan chains. The PGF obtained from NADESs with a molar ratio of 1:4 was comparable to those obtained from ethanol with a glucomannan content of 87.34 %-93.28 % and a weight-average molecular weight of 9.12 × 105-1.20 × 106 g/mol.

Effect of magnetic fields on the structure, properties, baking performance of frozen wheat dough at different frozen stage.

As an emerging physical technology, magnetic fields have been used to improve the quality of frozen and refrigerated foods. This study compared the effect of applying a static magnetic field (2 mT) at different stages of freezing and storage on the quality of frozen dough. Results suggested that the magnetic field significantly impacted frozen dough quality. It not only prevented the formation of ice crystals during the pre-freezing stage but also inhibited ice crystal growth during the following frozen storage. This effect helped to maintain the integrity of gluten proteins and their adhesion to starch granules by preventing the breakage of disulfide bonds and the depolymerization of gluten macromolecules. It was also observed that yeast inactivation and glutathione release were reduced, resulting in improved air retention and air production capacity of the dough. This, in turn, led to a more appealing volume and texture quality of the finished bread.

Interactions between partially gelatinized starch and nonstarch components in potato flour and their performance in emulsification.

To develop natural complex materials as starch-dominated emulsifiers, pregelatinization was conducted on potato flour. The effects of gelatinization degrees (GDs, 0 %-50 %) on the structural characteristics, physicochemical properties, and emulsifying potentials of potato flour were investigated. Increasing GD of potato flour promoted protein aggregation on starch granules surfaces and transformed starch semicrystalline structures into melted networks. The emulsion stabilized with 50 % GD potato flour exhibited excellent storage stability (7 d) and gel-like behavior. With increasing GD from 0 to 50 %, the respective apparent viscosities and elastic moduli of emulsion increased from 21.4 Pa to 1126.7 Pa, and from 0.133 Pa·s to 1176.6 Pa·s, promoting the formation of a stable network structure in the emulsion. Fourier transform infrared spectra from emulsions with a continuous phase of >20 % GD displayed a new peak around 1740 cm-1, suggesting improved covalent interactions between droplets, thereby facilitating emulsion stability. Confocal laser scanning microscopy images indicated that droplets could be anchored in the melted networks and broken starch granules, inhibiting droplets coalescence. These results suggest that pregelatinization is a viable strategy for customizing natural starch-dominated emulsions.

Green banana (Musa ssp.) mixed pulp and peel flour: A new ingredient with interesting bioactive, nutritional, and technological properties for food applications.

This study aimed to characterize and evaluate the in vitro bioactive properties of green banana pulp (GBPF), peel (GBPeF), and mixed pulp/peel flours M1 (90/10) and M2 (80/20). Lipid concentration was higher in GBPeF (7.53%), as were the levels of free and bound phenolics (577 and 653.1 mg GAE/100 g, respectively), whereas the resistant starch content was higher in GBPF (44.11%). Incorporating up to 20% GBPeF into the mixed flour had a minor effect on the starch pasting properties of GBPF. GBPeF featured rutin and trans-ferulic acid as the predominant free and bound phenolic compounds, respectively. GBPF presented different major free phenolics, though it had similar bound phenolics to GBPeF. Both M1 and M2 demonstrated a reduction in intracellular reactive oxygen species (ROS) generation. Consequently, this study validates the potential of green banana mixed flour, containing up to 20% GBPeF, for developing healthy foods and reducing post-harvest losses.

Physicochemical changes in Amaranthus spp grains, flour, isolated starch, and nanocrystals during germination and malting.

Amaranth is a pseudocereal that contains between 50 and 60% starch, gluten-free protein, and essential amino acids. This study investigates the physicochemical changes in Amaranthus spp. grains, flour, isolated starch and nanocrystals during germination and malting. The moisture content increased from 8.9% to 41% over 2 h of soaking. The percentage of germination increased rapidly, reaching 96% after 60 h, a remarkable advantage over other cereals. The nutrient composition varied, including protein synthesis and lipid degradation. Lipid concentration decreased during malting, except for soaking, which increased by 62%. Scanning electron microscopy shows that germination does not cause morphological changes on the outer surface of the grains, while transmission electron microscopy indicates the presence of isolated nanocrystals with orthorhombic crystal structure confirmed by X-ray diffraction. The viscosity profile shows a decrease in peak viscosity. Therefore, amaranth is a potential pseudocereal that can be used as an additive in the production of fermented beverages.