Finite element analysis of modified Slongo's external fixation in the treatment of supracondylar humeral fractures in older children.

Older children over 8 years old are at higher risk of elbow joint stiffness after treatment of supracondylar humeral fractures. The objective of this study was to improve the Slongo's external fixation system for treating supracondylar humeral fractures in older children. This would be achieved by increasing fixation strength and providing a theoretical basis through finite element analysis and mechanical testing. A 13-year-old female patient with a history of previous fracture was selected for CT data processing to create a three-dimensional model of the distal humerus fracture. Two internal fixation models were established, using the Slongo's external fixation method with Kirschner wire (Group A) and modifying the Slongo's external fixation (Kirschner wire tail fixation) (Group B). The fracture models were then subjected to mechanical loading analysis using Finite Element Analysis Abaqus 6.14 software to simulate separation, internal rotation, and torsion loads. A PVC humeral bone model was used to create a supracondylar fracture model, and the A and B internal fixation methods were applied separately. The anterior-posterior and torsional stresses were measured using the Bose Electroforce3510 testing system, followed by a comparative analysis. The finite element simulation results showed that under the same tensile, torsion, and inversion forces, the osteotomy model fixed with Kirschner wire at the distal end in Group B exhibited smaller tensile stress and deformation compared to the unfixed osteotomy model in Group A. This indicated that the fixation strength of Group B was superior to that of Group A. According to the test results of the Bose Electroforce3510 testing system, a simple linear regression analysis was conducted using SPSS software. The K values of rotation angle-torque tests and front and rear displacement-stress tests were calculated for Groups A and B, with Group B showing higher values than Group A. The results of this study supported the significantly enhanced biomechanical reliability and stability of fracture fixation in Group B, which utilized the modified Slongo's external fixation (Kirschner wire tail fixation). This optimized method provides a new choice for the clinical treatment of supracondylar humeral fractures in older children, backed by both clinical evidence and theoretical basis.

Current Concepts in Ankle Fracture Management.

Ankle fractures are one of the more common musculoskeletal injuries that are treated by foot and ankle specialists. A thorough understanding of managing these injuries requires the ability to differentiate between stable and unstable fractures. The current literature supports the nonoperative management of stable Weber B ankle fractures, whereas unstable fractures have much better outcomes with surgical intervention. Specifically, we review the fixation strategies for the lateral, medial, and posterior malleolar fractures respectively. Finally, we discuss the current trends in postoperative management of some of the more common fracture patterns, and the safety in early weight-bearing protocols.

Cost-effectiveness analysis of soft bandage and immediate discharge versus rigid immobilization in children with distal radius torus fractures.

Aims: The aim of this trial was to assess the cost-effectiveness of a soft bandage and immediate discharge, compared with rigid immobilization, in children aged four to 15 years with a torus fracture of the distal radius. Methods: A within-trial economic evaluation was conducted from the UK NHS and personal social services (PSS) perspective, as well as a broader societal point of view. Health resources and quality of life (the youth version of the EuroQol five-dimension questionnaire (EQ-5D-Y)) data were collected, as part of the Forearm Recovery in Children Evaluation (FORCE) multicentre randomized controlled trial over a six-week period, using trial case report forms and patient-completed questionnaires. Costs and health gains (quality-adjusted life years (QALYs)) were estimated for the two trial treatment groups. Regression was used to estimate the probability of the new treatment being cost-effective at a range of 'willingness-to-pay' thresholds, which reflect a range of costs per QALY at which governments are typically prepared to reimburse for treatment. Results: The offer of a soft bandage significantly reduced cost per patient (saving £12.55 (95% confidence interval (CI) -£5.30 to £19.80)) while QALYs were similar (QALY difference between groups: 0.0013 (95% CI -0.0004 to 0.003)). The high probability (95%) that offering a bandage is a cost-effective option was consistent when examining the data in a range of sensitivity analyses. Conclusion: In addition to the known clinical equivalence, this study found that the offer of a bandage reduced cost compared with rigid immobilization among children with a torus fracture of the distal radius. While the cost saving was small for each patient, the high frequency of these injuries indicates a significant saving across the healthcare system.

In vivo axial load-share ratio measurement using a novel hexapod system for safe external fixator removal.

BACKGROUND: External fixation is widely used in the treatment of traumatic fractures; however, orthopedic surgeons encounter challenges in deciding the optimal time for fixator removal. The axial load-share ratio (LS) of the fixator is a quantitative index to evaluate the stiffness of callus healing. This paper introduces an innovative method for measuring the LS and assesses the method's feasibility and efficacy. Based on a novel hexapod LS-measurement system, the proposed method is to improve the convenience and precision of measuring LS in vivo, hence facilitating the safe removal of external fixators. METHODS: A novel hexapod system is introduced, including its composition, theoretical model, and method for LS measurement. We conducted a retrospective study on 82 patients with tibial fractures treated by the Taylor Spatial Frame in our hospital from September 2018 to June 2020, of which 35 took LS measurements with our novel method (Group I), and 47 were with the traditional method (Group II). The external fixator was removed when the measurement outcome (LS < 10%) was consistent with the surgeon's diagnosis based on the clinical and radiological assessment (bone union achieved). RESULTS: No significant difference was found in the fracture healing time (mean 25.3 weeks vs. 24.9 weeks, P > 0.05), frame-wearing duration (mean 25.5 weeks vs. 25.8 weeks, P > 0.05), or LS measurement frequency (mean 1.1 times vs. 1.2 times, P > 0.05). The measurement system installation time in Group I was significantly shorter compared to Group II (mean 14.8 min vs. 81.3 min, P < 0.001). The LS value of the first measurement in Group I was lower than that of Group II (mean 5.1% vs. 6.9%, P = 0.011). In Group I, the refracture rate was 0, but in Group II it was 4.3% (2/47, P > 0.05). CONCLUSION: The novel hexapod LS-measurement system and involved method demonstrated enhanced convenience and precision in measuring the LS of the external fixator in vivo. The LS measurement indicates the callus stiffness of fracture healing, and is applicable to evaluate the safety of removing the fixator. Consequently, it is highly recommended for widespread adoption in clinical practice.

A new ring fixator system for automated bone fixation.

BACKGROUND: In the field of orthopaedics, external fixators are commonly employed for treating extremity fractures and deformities. Computer-assisted systems offer a promising and less error-prone treatment alternative to manual fixation by utilising a software to plan treatments based on radiological and clinical data. Nevertheless, existing computer-assisted systems have limitations and constraints. METHODS: This work represents the culmination of a project aimed at developing a new automatised fixation system and a corresponding software to minimise human intervention and associated errors, and the developed system incorporates enhanced functionalities and has fewer constraints compared to existing systems. RESULTS: The automatised fixation system and its graphical user interface (GUI) demonstrate promising results in terms of accuracy, efficiency, and reliability. CONCLUSION: The developed fixation system and its accompanying GUI represent an improvement in computer-assisted fixation systems. Future research may focus on further refining the system and conducting clinical trials.

Functional and union outcome of combined column tibial plateau fracture treated with hybrid external fixator.

Objective: To determine the combined column tibial plateau fracture treated with a hybrid external fixator in terms of knee functionality, union outcome and complications. METHODS: The quasi-experimental study was conducted at the Department of Orthopaedic Surgery, Mayo Hospital, Lahore, Pakistan, from July 5, 2019, to December 31, 2021, and comprised patients of either gender aged 20-50 years who presented with 2-column or 3-column fractures of proximal tibia classified according to the 3-column classification system after being diagnosed using radiographs and three-dimensional computed tomography scan. Knee function, union and complications, like neural, vascular, infection, delayed union, nonunion, malunion and implant failure, were evaluated. The Knee Society Score was used to assess knee function, and modified Rasmussen score for the union, while complications were assessed clinically on the 2nd, 6th, 12th, 16th, 24th, 36th weeks and one year post-operatively. Data was analysed using SPSS 26. RESULTS: Of the 113 patients, 91(80.53%) were males and 22(19.47%) were females. The overall mean age was 35.56±9.00 years. From the 12th week to the 24th week 45(39.83%) patients had good and 59(52.21%) patients had excellent functional outcomes. Union outcome in the 16th and 24th week was good in 57(50.44%) patients and excellent in 47(41.59%) patients. No neurovascular injury was observed. Superficial pin tract infection was observed in 21(18.6%) cases that healed with wound debridement and antibiotics. No delayed union, malunion and implant failure was observed. CONCLUSIONS: Good to excellent functional and union outcomes with minimum complications were observed with the hybrid external fixator.

In-vitro external fixation pin-site model proof of concept: A novel approach to studying wound healing in transcutaneous implants.

External fixation is an essential surgical technique for treating trauma, limb lengthening and deformity correction, however infection is common, with infection rates ranging from 4.5 to 100% of cases. Throughout the literature researchers and clinicians have highlighted a relationship between excessive movement of the pin and skin and an increase in the patient's risk of infection, however, currently no studies have addressed this role of pin-movement on pin-site wounds. This preliminary study describes a novel in vitro pin-site model, developed using a full-thickness human skin equivalent (HSE) model in conjunction with a bespoke mechanical system which simulates pin-movement. The effect of pin-movement on the wound healing response of the skin equivalents was assessed by measuring the expression of pro-inflammatory cytokines. Six human skin equivalent models were divided into three test groups: no pin as the control, static pin-site wound and dynamic pin-site wound (n = 3). On day 3 concentrations of IL-1α and IL-8 showed a significant increase compared to the control when a static fixation pin was implanted into the skin equivalent (p < 0.05) and (p < 0.005) respectively. Levels of IL-1α and IL-8 increased further in the dynamic sample compared to the static sample (p < 0.05) and (p < 0.0005). This study demonstrates for the first time the application of HSE model to study external-fixation pin-movement in vitro. The results of this study demonstrated pin-movement has a negative effect on soft-tissue wound-healing, supporting the anecdotal evidence reported in the literature, however further analysis of wound heading would be required to verify this hypothesis.

Biomechanical comparative study on external fixators of new configurations in the treatment of Tile C pelvic injury.

To compare the biomechanical properties of several anterior pelvic ring external fixators with two new configurations in the treatment of Tile C pelvic fractures, in order to evaluate the effectiveness of the new configurations and provide a reference for their clinical application. A finite element model of a Tile C pelvic ring injury (unilateral longitudinal sacral fracture and ipsilateral pubic fracture) was constructed. The pelvis was fixed with iliac crest external fixator (IC), anterior inferior iliac spine external fixator (AIIS), combination of IC and AIIS, combination of anterior superior iliac spine external fixator (ASIS) and AIIS, and S1 sacroiliac screw in 5 types of models. The stability indices of the anterior and posterior pelvic rings under vertical longitudinal load, left-right compression load and anterior-posterior shear load were quantified and compared. In the simulated bipedal standing position, the results of the vertical displacement of the midpoint on the upper surface of the sacrum are consistent with the displacement of the posterior rotation angle, and the order from largest to smallest is IC, AIIS, ASIS + AIIS, IC + AIIS and S1 screw. The longitudinal displacement of IC is greater than that of the other models. The displacements of ASIS + AIIS and IC + AIIS are similar and the latter is smaller. In the simulated semi-recumbent position, the vertical displacement and posterior rotation angle displacement of the midpoint on the upper surface of the sacrum are also consistent, ranking from large to small: IC, AIIS, ASIS + AIIS, IC + AIIS and S1 screw. Under the simulated left-right compression load state, the lateral displacements of the highest point of the lateral sacral fracture end are consistent with the highest point of the lateral pubic fracture end, and the order from large to small is S1 screw, IC, AIIS, ASIS + AIIS and IC + AIIS, among which the displacements of S1 screw and IC are larger, and the displacements of ASIS + AIIS and IC + AIIS are similar and smaller than those of other models. The displacements of IC + AIIS are smaller than those of ASIS + AIIS. Under the simulated anterior-posterior shear load condition, the posterior displacements of the highest point of the lateral sacral fracture end and the highest point of the lateral pubic fracture end are also consistent, ranking from large to small: IC, AIIS, ASIS + AIIS, IC + AIIS and S1 screw. Among them, the displacements of IC and AIIS are larger. The displacements of ASIS + AIIS and IC + AIIS are similar and the latter are smaller. For the unstable pelvic injury represented by Tile C pelvic fracture, the biomechanical various stabilities of the combination of IC and AIIS are superior to those of the external fixators of conventional configurations. The biomechanical stabilities of the combination of ASIS and AIIS are also better than those of the external fixators of conventional configurations, and slightly worse than those of the combination of IC and AIIS. Compared with sacroiliac screw and conventional external fixators, the lateral stabilities of IC + AIIS and ASIS + AIIS are particularly prominent.

[Basic principles of surgical treatment of distal radius fractures]. / Grundprinzipien der operativen Versorgung der distalen Radiusfraktur.

Distal radius fractures are one of the most frequent fractures of the upper extremities. The decision for conservative or surgical treatment is made after appropriate diagnostics using conventional radiographic and usually computed tomography imaging examinations. If the indications for surgical treatment are present, various options for reduction and fixation are available. The spectrum ranges from closed to open procedures up to accompanying arthroscopic support. Appropriate preoperative patient education about the procedure and the planned postinterventional treatment is essential. The goal of treatment is to restore wrist function while maintaining mobility and strength with a low risk of complications. All surgical procedures share the principle of reduction to restore anatomical relationship followed by fixation. Closed procedures include fixation with Kirschner wires and the construction of an external fixator. Volar locking plate osteosynthesis has become established in recent years as the method of choice for the majority of the fractures to be treated. For special fracture patterns and the treatment of accompanying injuries, arthroscopic support can be indicated. There is no uniform consensus on the best choice of procedure. This article discusses the possible procedures including the approaches, fixation techniques and specific follow-up treatment.

Toddler fractures immobilisation and complications: A retrospective review.

BACKGROUND: A Toddler's Fracture (TF) is classically an isolated, nondisplaced, distal-third diaphyseal tibial spiral fracture in younger children. A TF is stable and has a low risk of complication. There is lack of uniformity as to the optimal treatment for TF. Immobilisation with full above knee casting, below knee casting, splinting, controlled ankle motion boots and no immobilisation are all strategies currently in use. There is limited data from European centres regarding those treated without immobilisation. METHODS: A retrospective review of electronic medical and radiology records was performed to identify all children presenting to a multisite department of paediatric emergency medicine in Ireland from January to December 2022. Those with radiologically confirmed TF or a presumptive diagnosis of TF were included. Data retrieved for each child included initial treatment and the number of and reason for ED reattendances relating to the injury in the 6-month period following the injury. RESULTS: 166 children were identified, 96 with radiologically confirmed TF and 70 with presumptive diagnosis TF. Girls accounted for 47 % of presentations. Fall from a standing height (33 %) was the most common mechanism. 13 % (22/166) children were managed without immobilisation. Those with radiologically confirmed fracture (91/96) were significantly more likely to be immobilised than those with a presumptive diagnosis (53/70) (p = 0.001). In total 28 patients (17 % of total) represented to the ED within 6 months. The representation rate in those immobilised was 17 %, while in those not immobilised was 13 % (p = 0.66). CONCLUSION: In this cohort, those with no radiological evidence of fracture are more likely to be managed without immobilisation. There was no significant difference in PED representations between those immobilised and not immobilised.

[Treatment reality of distal radius fractures in a center]. / Versorgungsrealität distaler Radiusfrakturen in einem Zentrum.

Distal radius fractures are the third most common type of fracture in Germany after fractures of the femoral neck and peritrochanteric femoral fractures. In 2019 a total of 72,087 cases were registered with an incidence of 106 cases per 100,000 inhabitants (81,570 fractures of the femoral neck, 73,785 peritrochanteric fractures). Many of these fractures are surgically treated also in this hospital but with controversial views on the optimal treatment. Against the background of the coronavirus disease 2019 (COVID-19) pandemic, disappearing personnel resources and the political pressure to form centers and a switch to outpatient treatment, the authors ask the question what the treatment reality in this hospital looks like and whether the general changes in the framework conditions also have an affect in this context. This is not a strictly scientific study but a stocktaking without any claims of completeness and the retrospective evaluation of a larger data pool with all its weaknesses. On the contrary, the data provide interesting aspects that are explained in detail in the individual sections.

The Clinical Application of Double Taylor Spatial Frame in Segmental Tibial Fracture.

OBJECTIVES: Multi-planar external fixation has been used for the management of segmental tibial fractures with severe soft tissue injuries. However, fewer specialized studies have been reported. The primary aim of this study was to describe our experience of treating fractures of this type using the Taylor Spatial Frame and Ilizarov external fixation methods. METHODS: We retrospectively analyzed 33 patients with segmental tibial fracture treated at our institution between January 2016 and December 2020. The patients were divided into double Taylor Spatial Frame (D-TSF) and Ilizarov groups based on the external fixation structure. Baseline demographic data included sex, age, injury side and cause, open or closed fracture, time from injury to surgery, complications, and external frame removal and fracture healing time. The hip-knee-ankle angle (HKA) was measured from preoperative, immediate postoperative, and final follow-up full-length X-rays of bilateral lower limbs. We determined the degree of deviation in the HKA by calculating the difference between the measured angle and the ideal value of 180°; the absolute value was used to assess recovery of the lower limb force line. At the final follow-up, Johner-Wruhs tibial fracture outcome criteria (J-W TFOC) were used to classify the postoperative function of the affected limb as excellent, good, moderate, or poor. Count data were analyzed with the chi-square test or Fisher's exact test; the Mann-Whitney U test was used for rank data. RESULTS: No statistically significant differences were observed between the two groups in terms of sex, age, side of injury, cause of injury, closed or open fracture, or time between injury and surgery, which indicates that the groups were comparable (p > 0.05). A statistically significant difference was observed in external frame removal and fracture healing time between the D-TSF and Ilizarov groups (36.24 ± 8.34 vs 45.42 ± 10.21 weeks, p = 0.009; 33.33 ± 8.21 vs 42.00 ± 9.78 weeks, p = 0.011). The Johner-Wruhs criteria were used to assess the function of the affected limb, the D-TSF group performed better in correcting the lower limb force line than the Ilizarov group. A statistically significant difference in terms of excellent ratings was observed between the two groups (18/2/1/0 vs 5/5/1/1, p = 0.010). Postoperative follow-up X-rays demonstrated a significant improvement in the HKA in both groups immediately after surgery and at the final follow-up compared to the angle before surgery. At the final follow-up, a statistically significant difference was observed in the degree of deviation in the HKA between the two groups (1.58° ± 0.84° vs 2.37° ± 1.00°, p = 0.023). CONCLUSION: The D-TSF treatment is associated with minimal secondary damage to soft tissue, a straightforward and minimally invasive procedure, multiplanar stable fracture fixation, and optimization of fracture alignment and lower limb force lines, therefore, it is highly effective therapeutic option for segmental tibial fracture.

Risk Factors for Revision of External Fixation of Unstable Ankle Injuries.

INTRODUCTION: External fixation of unstable ankle injuries is commonly done by orthopaedic surgeons. An improper technique can negate the benefits of the procedure and necessitate revision. This study sought to determine the risk factors for revision of external fixation of unstable ankle injuries. METHODS: Retrospective cohort at a level I academic trauma center of 120 consecutive patients underwent external fixation of an unstable ankle injury. Exclusion criteria included external fixation for reason other than fracture, inadequate intraoperative imaging, skeletal immaturity, and follow-up less than 30 days. Primary outcome measurement was revision of external fixation within 30 days. RESULTS: Ninety-seven patients met inclusion criteria. Eighteen (18.6%) underwent revision within 30 days of whom 5 (28%, P < 0.001) had a poor reduction intraoperatively. No patients with a good reduction required revision. Revised patients had a significantly higher talar tilt (P < 0.001) and were more likely to lack a first metatarsal pin (P = 0.018). Multivariate analysis revealed talar tilt >0.5° (odds ratio, 22.62; 95% confidence interval, 6.52 to 50.63) as an independent risk factor for revision. DISCUSSION: For external fixation of unstable ankle injuries, poor reduction quality is a risk factor for need for revision surgery. Orthopaedic surgeons should be critical of their final intraoperative assessment to prevent revision.

Mangled Thumb Injury Reconstruction with the Use of Definitive External Fixation and the Masquelet Technique: A Case Report.

CASE: A 23-year-old right-hand dominant man presented with a high-velocity gunshot wound injury to the right thumb with severe soft-tissue damage, vascular injury, and large osseous defect of the right thumb metacarpal. The patient was successfully treated with metacarpophalangeal joint arthrodesis and metacarpal reconstruction using definitive external fixation, an intramedullary Kirschner wire, and use of the Masquelet bone grafting technique. CONCLUSION: The authors' treatment approach for a mangled thumb injury with definitive external fixation and utilization of the Masquelet technique resulted in restoration of a large osseous defect, avoidance of infection, and limited loss of mobility.

Evaluating the stability of external fixators following pelvic injury: A systematic review of biomechanical testing methods.

INTRODUCTION: This systematic review aims to identify previously used techniques in biomechanics to assess pelvic instability following pelvic injury, focusing on external fixation constructs. METHODS: A systematic literature search was conducted to include biomechanical studies and to exclude clinical trials. RESULTS: Of an initial 4666 studies found, 38 met the inclusion criteria. 84% of the included studies were retrieved from PubMed, Scopus, and Web of Science. The studies analysed 106 postmortem specimens, 154 synthetic bones, and 103 computational models. Most specimens were male (97% synthetic, 70% postmortem specimens). Both the type of injury and the classification system employed varied across studies. About 82% of the injuries assessed were of type C. Two different fixators were tested for FFPII and type A injury, five for type B injury, and fifteen for type C injury. Large variability was observed for external fixation constructs concerning device type and configuration, pin size, and geometry. Biomechanical studies deployed various methods to assess injury displacement, deformation, stiffness, and motion. Thereby, loading protocols differed and inconsistent definitions of failure were determined. Measurement techniques applied in biomechanical test setups included strain gauges, force transducers, and motion tracking techniques. DISCUSSION AND CONCLUSION: An ideal fixation method should be safe, stable, non-obstructive, and have low complication rates. Although biomechanical testing should ensure that the load applied during testing is representative of a physiological load, a high degree of variability was found in the current literature in both the loading and measurement equipment. The lack of a standardised test design for fixation constructs in pelvic injuries across the studies challenges comparisons between them. When interpreting the results of biomechanical studies, it seems crucial to consider the limitations in cross-study comparability, with implications on their applicability to the clinical setting.

Five-Year Follow-Up of Surgery vs Functional Bracing for Closed Displaced Humeral Shaft Fractures.

This study compares outcomes of surgery and functional bracing for closed humeral shaft fractures after 5 years of follow-up.

Sexual Dysfunction in Women After Tibial Fracture: A Retrospective Comparative Study.

BACKGROUND Tibial fractures, common in adults, are often treated with external or internal fixation methods. While effective, external fixation (EF) can lead to sexual dysfunction (SD), especially in young patients. This study aimed to assess SD in women undergoing EF versus internal fixation for tibial fractures. MATERIAL AND METHODS Sexual function and frequency of monthly sexual intercourse (SI) were evaluated using the Female Sexual Function Index (FSFI) before surgery, with the fixator, after at least 6 months following fixator removal in EF group, and after achieving bone union for at least 3 months in the IF group. RESULTS The EF group consisted of 107 (mean age 28.5 years; 19-40 years) and IF group consisted of 106 patients (mean age 32.1 years; 18-40 years). The duration of EF was an average of 4.7 months (range, 2.5-13 months). FSFI scores were significantly lower in the EF group compared to the IF group (9.33 versus 27.3, P<0.001). Also, there was no significant difference between the FSFI scores before EF and after EF was removed (34.22 versus 33.8, P=0.413). FSFI sub-group scores such as desire, arousal, lubrication, and orgasm were significantly lower in the EF group (P<0.001). The monthly average frequency of SI before surgery and after the removal of EF was 10.2 and 9.1, respectively, while this frequency was 2.56 when EF was present (P<0.001). CONCLUSIONS The quality and frequency of SI in women significantly deteriorate and decrease during the period of extremity fixation following tibial diaphyseal fractures treated with EF, but return to normal after removal.