Computer-Aided Semi-Rational Design to Enhance the Activity of l-Sorbosone Dehydrogenase from Gluconobacter oxidans WSH-004.

The titer of the microbial fermentation products can be increased by enzyme engineering. l-Sorbosone dehydrogenase (SNDH) is a key enzyme in the production of 2-keto-l-gulonic acid (2-KLG), which is the precursor of vitamin C. Enhancing the activity of SNDH may have a positive impact on 2-KLG production. In this study, a computer-aided semirational design of SNDH was conducted. Based on the analysis of SNDH's substrate pocket and multiple sequence alignment, three modification strategies were established: (1) expanding the entrance of SNDH's substrate pocket, (2) engineering the residues within the substrate pocket, and (3) enhancing the electron transfer of SNDH. Finally, mutants S453A, L460V, and E471D were obtained, whose specific activity was increased by 20, 100, and 10%, respectively. In addition, the ability of Gluconobacter oxidans WSH-004 to synthesize 2-KLG was improved by eliminating H2O2. This study provides mutant enzymes and metabolic engineering strategies for the microbial-fermentation-based production of 2-KLG.

Ketogluconate production by Gluconobacter strains: enzymes and biotechnological applications.

Gluconobacter strains perform incomplete oxidation of various sugars and alcohols, employing regio- and stereoselective membrane-bound dehydrogenases oriented toward the periplasmic space. This oxidative fermentation process is utilized industrially. The ketogluconate production pathway, characteristic of these strains, begins with the conversion of d-glucose to d-gluconate, which then diverges and splits into 2 pathways producing 5-keto-d-gluconate and 2-keto-d-gluconate and subsequently 2,5-diketo-d-gluconate. These transformations are facilitated by membrane-bound d-glucose dehydrogenase, glycerol dehydrogenase, d-gluconate dehydrogenase, and 2-keto-d-gluconate dehydrogenase. The variance in end products across Gluconobacter strains stems from the diversity of enzymes and their activities. This review synthesizes biochemical and genetic knowledge with biotechnological applications, highlighting recent advances in metabolic engineering and the development of an efficient production process focusing on enzymes relevant to the ketogluconate production pathway in Gluconobacter strains.

New perspectives into Gluconobacter-catalysed biotransformations.

Different from other aerobic microorganisms that oxidise carbon sources to water and carbon dioxide, Gluconobacter catalyses the incomplete oxidation of various substrates with regio- and stereoselectivity. This ability, as well as its capacity to release the resulting products into the reaction media, place Gluconobacter as a privileged member of a non-model microorganism class that may boost industrial biotechnology. Knowledge of new technologies applied to Gluconobacter has been piling up in recent years. Advancements in its genetic modification, application of immobilisation tools and careful designs of the transformations, have improved productivities and stabilities of Gluconobacter strains or enabled new bioconversions for the production of valuable marketable chemicals. In this work, the latest advancements applied to Gluconobacter-catalysed biotransformations are summarised with a special focus on recent available tools to improve them. From genetic and metabolic engineering to bioreactor design, the most recent works on the topic are analysed in depth to provide a comprehensive resource not only for scientists and technologists working on/with Gluconobacter, but for the general biotechnologist.

Engineering Gluconobacter cerinus CGMCC 1.110 for direct 2-keto-L-gulonic acid production.

Gluconobacter is a potential strain for single-step production of 2-keto-L-gulonic acid (2-KLG), which is the direct precursor of vitamin C. Three dehydrogenases, namely, sorbitol dehydrogenase (SLDH), sorbose dehydrogenase (SDH), and sorbosone dehydrogenase (SNDH), are involved in the production of 2-KLG from D-sorbitol. In the present study, the potential SNDH/SDH gene cluster in the strain Gluconobacter cerinus CGMCC 1.110 was mined by genome analysis, and its function in transforming L-sorbose to 2-KLG was verified. Proteomic analysis showed that the expression level of SNDH/SDH had a great influence on the titer of 2-KLG, and fermentation results showed that SDH was the rate-limiting enzyme. A systematic metabolic engineering process, which was theoretically suitable for increasing the titer of many products involving membrane-bound dehydrogenase from Gluconobacter, was then performed to improve the 2-KLG titer in G. cerinus CGMCC 1.110 from undetectable to 51.9 g/L in a 5-L bioreactor after fermentation optimization. The strategies used in this study may provide a reference for mining other potential applications of Gluconobacter. KEY POINTS: • The potential SNDH/SDH gene cluster in G. cerinus CGMCC 1.110 was mined. • A systematic engineering process was performed to improve the titer of 2-KLG. • The 2-KLG titer was successfully increased from undetectable to 51.9 g/L.

The first in-depth exploration of the genome of the engineered bacterium, Gluconobacter thailandicus.

Glycerol is an abundant byproduct of biodiesel production that has significant industrial value and can be converted into dihydroxyacetone (DHA). DHA is widely used for the production of various chemicals, pharmaceuticals, and food additives. Gluconobacter can convert glycerol to DHA through two different pathways, including membrane-bound dehydrogenases with pyrroloquinoline quinone (PQQ) and NAD(P)+ -dependent enzymes. Previous work has indicated that membrane-bound dehydrogenases are present in Gluconobacter oxydans and Gluconobacter frateurii, but the metabolic mechanism of Gluconobacter thailandicus's glycerol conversion is still not clear. Through in-depth analysis of the G. thailandicus genome and annotation of its metabolic pathways, we revealed the existence of both PQQ and NAD(P)+ -dependent enzymes in G. thailandicus. In addition, this study provides important information related to the tricarboxylic acid cycle, glycerol dehydrogenase level, and phylogenetic relationships of this important species.

Ecofriendly green biosynthesis and characterization of novel bacteriocin-loaded bacterial cellulose nanofiber from Gluconobacter cerinus HDX-1.

A new strain of bacterial cellulose (BC)-producing Gluconobacter cerinus HDX-1 was isolated and identified, and a simple, low-cost complexation method was used to biosynthesis Lactobacillus paracasei 1∙7 bacteriocin BC (BC-B) nanofiber. The structure and antibacterial properties of the nanofibers were evaluated. Solid-state nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR) and x-ray diffraction (XRD) analysis showed that BC and BC-B nanofibers had typical crystalline form of the cellulose I. X-ray photoelectron spectrometer (XPS), scanning electron microscope (SEM) and atomic force microscopy (AFM) revealed that the bacteriocin and BC were successfully compounded, and the structure of BC-B nanofiber was tighter than BC nanofiber, with lower porosity, swelling ratio and water vapor transmission rate (WVTR). The tensile strength and Young's modulus of BC-B nanofibers were 13.28 ± 1.26 MPa and 132.10 ± 4.92 MPa, respectively, higher than that of BC nanofiber (6.12 ± 0.87 MPa and 101.59 ± 5.87 MPa), indicating that bacteriocin enhance the mechanical properties of BC nanofiber. Furthermore, the BC-B nanofibers exhibited significant thermal stability, antioxidant capacity and antibacterial activity than BC nanofiber. Therefore, bacteriocin-loaded BC nanofiber may be used as antimicrobial agents in active food packaging and medical material.

Effect of fermentation time on the content of bioactive compounds with cosmetic and dermatological properties in Kombucha Yerba Mate extracts.

Kombucha is a beverage made by fermenting sugared tea using a symbiotic culture of bacteria belonging to the genus Acetobacter, Gluconobacter, and the yeasts of the genus Saccharomyces along with glucuronic acid, which has health-promoting properties. The paper presents the evaluation of ferments as a potential cosmetic raw material obtained from Yerba Mate after different fermentation times with the addition of Kombucha. Fermented and unfermented extracts were compared in terms of chemical composition and biological activity. The antioxidant potential of obtained ferments was analyzed by evaluating the scavenging of external and intracellular free radicals. Cytotoxicity was determined on keratinocyte and fibroblast cell lines, resulting in significant increase in cell viability for the ferments. The ferments, especially after 14 and 21 days of fermentation showed strong ability to inhibit (about 40% for F21) the activity of lipoxygenase, collagenase and elastase enzymes and long-lasting hydration after their application on the skin. Moreover, active chemical compounds, including phenolic acids, xanthines and flavonoids were identified by HPLC/ESI-MS. The results showed that both the analyzed Yerba Mate extract and the ferments obtained with Kombucha may be valuable ingredients in cosmetic products.

The 5-Ketofructose Reductase of Gluconobacter sp. Strain CHM43 Is a Novel Class in the Shikimate Dehydrogenase Family.

Gluconobacter sp. strain CHM43 oxidizes mannitol to fructose and then oxidizes fructose to 5-keto-d-fructose (5KF) in the periplasmic space. Since NADPH-dependent 5KF reductase was found in the soluble fraction of Gluconobacter spp., 5KF might be transported into the cytoplasm and metabolized. Here, we identified the GLF_2050 gene as the kfr gene encoding 5KF reductase (KFR). A mutant strain devoid of the kfr gene showed lower KFR activity and no 5KF consumption. The crystal structure revealed that KFR is similar to NADP+-dependent shikimate dehydrogenase (SDH), which catalyzes the reversible NADP+-dependent oxidation of shikimate to 3-dehydroshikimate. We found that several amino acid residues in the putative substrate-binding site of KFR were different from those of SDH. Phylogenetic analyses revealed that only a subclass in the SDH family containing KFR conserved such a unique substrate-binding site. We constructed KFR derivatives with amino acid substitutions, including replacement of Asn21 in the substrate-binding site with Ser that is found in SDH. The KFR-N21S derivative showed a strong increase in the Km value for 5KF but a higher shikimate oxidation activity than wild-type KFR, suggesting that Asn21 is important for 5KF binding. In addition, the conserved catalytic dyad Lys72 and Asp108 were individually substituted for Asn. The K72N and D108N derivatives showed only negligible activities without a dramatic change in the Km value for 5KF, suggesting a catalytic mechanism similar to that of SDH. With these data taken together, we suggest that KFR is a new member of the SDH family. IMPORTANCE A limited number of species of acetic acid bacteria, such as Gluconobacter sp. strain CHM43, produce 5-ketofructose, a potential low-calorie sweetener, at a high yield. Here, we show that an NADPH-dependent 5-ketofructose reductase (KFR) is involved in 5-ketofructose degradation, and we characterize this enzyme with respect to its structure, phylogeny, and function. The crystal structure of KFR was similar to that of shikimate dehydrogenase, which is functionally crucial in the shikimate pathway in bacteria and plants. Phylogenetic analysis suggested that KFR is positioned in a small subgroup of the shikimate dehydrogenase family. Catalytically important amino acid residues were also conserved, and their relevance was experimentally validated. Thus, we propose KFR as a new member of shikimate dehydrogenase family.

Characterization of a cryptic, pyrroloquinoline quinone-dependent dehydrogenase of Gluconobacter sp. strain CHM43.

We characterized the pyrroloquinoline quinone (PQQ)-dependent dehydrogenase 9 (PQQ-DH9) of Gluconobacter sp. strain CHM43, which is a homolog of PQQ-dependent glycerol dehydrogenase (GLDH). We used a plasmid construct to express PQQ-DH9. The expression host was a derivative strain of CHM43, which lacked the genes for GLDH and the membrane-bound alcohol dehydrogenase and consequently had minimal ability to oxidize primary and secondary alcohols. The membranes of the transformant exhibited considerable d-arabitol dehydrogenase activity, whereas the reference strain did not, even if it had PQQ-DH9-encoding genes in the chromosome and harbored the empty vector. This suggests that PQQ-DH9 is not expressed in the genome. The activities of the membranes containing PQQ-DH9 and GLDH suggested that similar to GLDH, PQQ-DH9 oxidized a wide variety of secondary alcohols but had higher Michaelis constants than GLDH with regard to linear substrates such as glycerol. Cyclic substrates such as cis-1,2-cyclohexanediol were readily oxidized by PQQ-DH9.

Application of Glyceric Acid to Bio-related Functional Materials and Improvement of Microbial Production.

Glyceric acid (GA) is an oxidative product of glycerol, and its d-isomer is obtained as a phytochemical from tobacco leaves and fruits of some plants. However, the production and applications of GA have not yet been fully investigated. In this review, recent developments in the microbial production of GA and its application to bio-related materials are summarized. The sodium salt of diacylated GA showed superior surface tension-lowering activity and antitrypsin activity. GA and its glucosyl derivative had positive effects on the viability and collagen production of skin cells in vitro, respectively. Glucosyl derivatives of GA showed protective effects against heat-induced protein aggregation. In addition, the microbial production of GA using raw glycerol as the starting material was investigated. The effect of methanol, a major impurity in raw glycerol, on GA production was investigated, and mutant strains to tolerate methanol in the culture were constructed. Enantioselective production of GA using newly isolated microbial strains has also been developed.

L-Xylo-3-hexulose, a new rare sugar produced by the action of acetic acid bacteria on galactitol, an exception to Bertrand Hudson's rule.

BACKGROUND: In acetic acid bacteria such as Gluconobacter oxydans or Gluconobacter cerinus, pyrroloquinoline quinone (PQQ) in the periplasm serves as the redox cofactor for several membrane-bound dehydrogenases that oxidize polyhydric alcohols to rare sugars, which can be used as a healthy alternative for traditional sugars and sweeteners. These oxidation reactions obey the generally accepted Bertrand Hudson's rule, in which only the polyhydric alcohols that possess cis d-erythro hydroxyl groups can be oxidized to 2-ketoses using PQQ as a cofactor, while the polyhydric alcohols excluding cis d-erythro hydroxyl groups ruled out oxidation by PQQ-dependent membrane-bound dehydrogenases. METHODS: Membrane fractions of G. oxydans were prepared and used as a cell-free catalyst to oxidize galactitol, with or without PQQ as a cofactor. RESULTS: In this study, we reported an interesting oxidation reaction that the polyhydric alcohols galactitol (dulcitol), which do not possess cis d-erythro hydroxyl groups, can be oxidized by PQQ-dependent membrane-bound dehydrogenase(s) of acetic acid bacteria at the C-3 and C-5 hydroxyl groups to produce rare sugars l-xylo-3-hexulose and d-tagatose. CONCLUSIONS: This reaction may represent an exception to Bertrand Hudson's rule. GENERAL SIGNIFICANCE: Bertrand Hudson's rule is a well-known theory in polyhydric alcohols oxidation by PQQ-dependent membrane-bound dehydrogenase in acetic acid bacteria. In this study, galactitol oxidation by a PQQ-dependent membrane-bound dehydrogenase represents an exception to the Bertrand Hudson's rule. Further identification of the associated enzymes and deciphering the explicit enzymatic mechanism will prove this theory.

Metaproteomics of microbiota involved in submerged culture production of alcohol wine vinegar: A first approach.

Acetic acid bacteria form a complex microbiota that plays a fundamental role in the industrial production of vinegar through the incomplete oxidation reaction from ethanol to acetic acid. The organoleptic properties and the quality of vinegar are influenced by many factors, especially by the raw material used as acetification substrate, the microbial diversity and the technical methods employed in its production. The metaproteomics has been considered, among the new methods employed for the investigation of microbial communities, since it may provide information about the microbial biodiversity and behaviour by means of a protein content analysis. In this work, alcohol wine vinegar was produced through a submerged culture of acetic acid bacteria using a pilot acetator, operated in a semi-continuous mode, where the main system variables were monitored and the cycle profile throughout the acetification was obtained. Through a first approach, at qualitative level, of a metaproteomic analysis performed at relevant moments of the acetification cycle (end of fast and discontinuous loading phases and just prior to unloading phase), it is aimed to investigate the microbiota existent in alcohol wine vinegar as well as its changes during the cycle; to our knowledge, this is the first metaproteomics report carried out in this way on this system. A total of 1723 proteins from 30 different genera were identified; 1615 out of 1723 proteins (93.73%) belonged to the four most frequent (%) genera: Acetobacter, Gluconacetobacter, Gluconobacter and Komagataeibacter. Around 80% of identified proteins belonged to the species Komagataeibacter europaeus. In addition, GO Term enrichment analysis highlighted the important role of catalytic activity, organic cyclic compound binding, metabolic and biosynthesis processes throughout acetic acid fermentation. These findings provide the first step to obtain an AAB profile at omics level related to the environmental changes produced during the typical semi-continuous cycles used in this process and it would contribute to the optimization of operating conditions and improving the industrial production of vinegar.

High yield production of levan-type fructans by Gluconobacter japonicus LMG 1417.

Levan, a ß-2,6-glycosidic linked fructan, is a promising alternative for the inulin dominated fructan market. Although levan is already used in some cosmetic products, the commercial availability of the fructan is still limited. Here we show that Gluconobacter japonicus LMG 1417 is a potent levan-forming organism and a promising platform for the industrial production of levan. The levansucrase LevS1417, which is produced by G. japonicus LMG 1417 and secreted by a signal-peptide-independent pathway, exhibited extraordinary high activity (4726 ±â€¯821 U mg-1 at 50 °C). A cell-free levan production based on the supernatant of the investigated strain led to a final levan yield of 157.9 ±â€¯7.6 g L-1. The amount of secreted levansucrase was more than doubled by plasmid-mediated homologous overproduction of LevS1417 in G. japonicus LMG 1417. Accordingly, the space-time yield of cell-free levan production was doubled using the plasmid-bearing mutant.

Bacterial cellulose production from biodiesel-derived crude glycerol, magnetic functionalization, and its application as carrier for lipase immobilization.

The present study aims towards the kinetic analysis of bacterial cellulose (BC) production by Gluconobacter xylinus from biodiesel-derived crude glycerol and its application as support for immobilization of lipase. Enhancement in strength of BC membrane and its magnetic functionalization were accomplished by the impregnation of iron oxide nanoparticles into the BC matrix. Fitting of experimental results to various substrate inhibition models revealed a reduction of substrate affinity (KS) and reaction rate (Vmax), and increase in substrate inhibition concentration of G. xylinus cells in presence of crude glycerol, in comparison to the pure form of glycerol. Improvement in mechanical properties of pristine BC and magnetic strength of functionalized BC membrane were confirmed by stress-strain curve and vibrating sample magnetometry analysis, respectively. This magnetic BC membrane provided suitable support for the immobilization of Candida rugosa lipase. The immobilized enzymes exhibited better activity at various temperatures, broader pH-flexibility, thermostability (retention of 48% of its activity after 180 min at 50 °C), and reusability (59% of its activity sustained after five consecutive runs). In comparison to free lipase, the immobilized lipase exhibited improved stability and activity, which could be applicable for industrial scale.

Insights into the pH-dependent, extracellular sucrose utilization and concomitant levan formation by Gluconobacter albidus TMW 2.1191.

Many bacteria and archaea produce the polydisperse fructose polymer levan from sucrose upon biofilm formation via extracellular levansucrases (EC 2.4.1.10). We have investigated levansucrase-release and -activities as well as molecular size of the levan formed by the acetic acid bacterium Gluconobacter albidus TMW 2.1191 at varying environmental pH conditions to obtain insight in the ecological role of its constitutively expressed levansucrase and the produced levan. A buffer system was established enabling the recovery of levansucrase-containing supernatants from preincubated cell suspensions at pH 4.3-pH 5.7. The enzyme solutions were used to produce levans at different pH values and sucrose concentrations. Finally, the amounts and size distributions of the produced levans as well as the corresponding levansucrase activities were determined and correlated with each other. The data revealed that the levansucrase was released into the environment independently of its substrate sucrose, and that more levansucrase was released at pH ≥ 5.0. The glucose release and formation of high molecular weight levans (> 3.5 kDa) from 0.1 M initial sucrose was comparable between pH ~ 4.3-5.7 using equal amounts of released levansucrase. Hence, this type of levansucrase appears to be structurally adapted to changes in the extracellular pH and to exhibit a similar total activity over a wide acidic pH range, while it produced higher amounts of larger levan molecules at higher production pH and sucrose concentrations. These findings indicate the physiological adaptation of G. albidus TMW 2.1191 to efficient colonisation of sucrose-rich habitats via released levansucrases despite changing extracellular pH conditions in course of acid formation.

Efficient glycerol transformation by resting Gluconobacter cells.

In the present work, glycerol biotransformation using Gluconobacter strains was studied with a process intensification perspective that facilitated the development of a cleaner and more efficient technology from those previously reported. Starting from the industrial by-product, crude glycerol, resting cells of Gluconobacter frateurii and Gluconobacter oxydans were able to convert glycerol under batch reactor conditions in water with no other additive but for the substrate. The study of strains, biomass:solution ratio, pH, growth stage, and simplification of media composition in crude glycerol bioconversions facilitated productivities of glyceric acid of 0.03 g/L.h and 2.07 g/L.h (71.5 g/g % pure by NMR) of dihydroxyacetone (DHA). Productivities surmounted recent reported fermentative bioconversions of crude glycerol and were unprecedented for the use of cell suspended solely in water. This work proposes a novel approach that allows higher productivities, cleaner production, and reduction in water and energy consumption, and demonstrates the applicability of the proposed approach.

Linking cocoa varietals and microbial diversity of Nicaraguan fine cocoa bean fermentations and their impact on final cocoa quality appreciation.

Nicaraguan cocoa bean fermentations of several single local cocoa varieties originating from the same region (North Highlands of Nicaragua, San Jose de Bocay/El Cuá) were compared to fermentations of blended cocoa varietals from other producing regions of the country (Waslala and Nueva Guinea) making use of High Throughput Sequencing techniques, metabolite target analysis and sensory evaluation of cocoa liquor samples. A succession of the important cocoa-related yeasts Hanseniaspora uvarum/opuntiae, Saccharomyces cerevisiae and/or Pichia kudriavzevii was seen for single varietals and Nueva Guinea fermentations, while Kazachstania humilis dominated the mid and end phase of the Waslala cocoa fermentations. Tatumella species (mainly Tatumella terrea and Tatumella punctata) predominated the bacterial community at the onset of all fermentations followed by unusually late (generally 2 days into the fermentations) appearance of Lactobacillus fermentum relative to fermentations in other parts of the World. Acetobacter spp. were the main acetic acid bacteria during all fermentations, but also Gluconobacter spp. were involved in some single-variety fermentations. All fermentations proved complete as determined by metabolite analysis with bean sucrose being fully depleted and pulp sugars exhausted after 48-72 h of fermentation. From an organoleptic point of view, all Nicaraguan cocoas of this study reflected fine fruity (citrus or berry-like) flavours with distinct herbal or caramel notes. Floral notes were associated with the cases where P. kudriavzevii was involved in the later stages of fermentation. Intense citrus/fruity character was related to high pulp and bean citrate concentrations. Off-notes were found in some over-fermented batches where Bacillus spp. was detected. No relation between cut-test results and organoleptic appreciation was seen.

Introducing a thermotolerant Gluconobacter japonicus strain, potentially useful for coenzyme Q10 production.

In this report, Gluconobacter strains were screened for coenzyme Q10 (CoQ10) production. A thermotolerant strain, Gluconobacter japonicus FM10, was eventually employed for CoQ10 production optimization. To do so, a two-step optimization strategy was used. The first step focused on biomass increase and the second step focused on increase in CoQ10 production. Factors including temperature, pH, carbon, and nitrogen sources were optimized at the first step, and temperature, pH, and aeration were optimized at the second step. The batch culture fermentation was used with the optimized factors of the first phase (30 °C, pH 6.5, D-sorbitol, and yeast extract-peptone as the carbon and nitrogen sources). After 18 h, the temperature, pH, and aeration were shifted to the optimized values of the second step (36 °C, pH 7, and no aeration). By this strategy, the dry cell mass (17.1 g/L) and CoQ10 (23.2 mg/L) were obtained after 20 h, which the latter was 2.3 times higher than that of the first step of optimization. Among the conditions tested, carbon source was the most important factor on the cell growth at the first step while no aeration was the key factor for CoQ10 production in the second step of optimization.

Unravelling the contribution of lactic acid bacteria and acetic acid bacteria to cocoa fermentation using inoculated organisms.

Cocoa beans (Theobroma cacao L.) are the raw material for chocolate production. Fermentation of the bean pulp by microorganisms is essential for developing the precursors of chocolate flavour. Currently, the cocoa fermentation is still conducted by an uncontrolled traditional process via a consortium of indigenous species of yeasts, lactic acid bacteria and acetic acid bacteria. Although the essential contribution of yeasts to the production of good quality beans and, typical chocolate character is generally agreed, the roles of lactic acid bacteria and acetic acid bacteria are less certain. The objective of this study was to investigate the contribution of LAB and AAB in cocoa bean fermentation by conducting small scale laboratory fermentations under aseptic conditions, inoculated with different groups of microorganisms previously isolated from spontaneous cocoa fermentations. The inoculation protocols were: (1) four yeasts Hanseniaspora guilliermondii, Pichia kudriavzevii, Kluyveromyces marxianus and Saccharomyces cerevisiae; (2) four yeasts plus the lactic acid bacteria Lactobacillus plantarum and Lactobacillus fermentum; (3) four yeasts plus the acetic acid bacteria Acetobacter pasteurianus and Gluconobacter frateuri and (4) four yeasts plus two lactic acid bacteria and two acetic acid bacteria. Only the inoculated species were detected in the microbiota of their respective fermentations. Beans from the inoculated fermentations showed no significant differences in colour, shell weights and concentrations of residual sugars, alcohols and esters (p>0.05), but they were slightly different in contents of lactic acid and acetic acid (p<0.05). All beans were fully brown and free of mould. Residual sugar levels were less than 2.6 mg/g while the shell contents and ethanol were in the range of 11-13.4% and 4.8-7 mg/g, respectively. Beans fermented in the presence of LAB contained higher levels of lactic acid (0.6-1.2 mg/g) whereas higher concentrations of acetic acid (1.8-2.2 mg/g) were detected in beans inoculated with AAB. Triangle and hedonic sensory evaluations of chocolates prepared from beans taken from the three fermentations showed no significant differences (p > 0.05). It was concluded that the growth of lactic acid bacteria and acetic acid bacteria may not be essential for the fermentation of cocoa beans.

The influence of pH and divalent/monovalent cations on the internal electron transfer (IET), enzymatic activity, and structure of fructose dehydrogenase.

We report on the influence of pH and monovalent/divalent cations on the catalytic current response, internal electron transfer (IET), and structure of fructose dehydrogenase (FDH) by using amperometry, spectrophotometry, and circular dichroism (CD). Amperometric measurements were performed on graphite electrodes, onto which FDH was adsorbed and the effect on the response current to fructose was investigated when varying the pH and the concentrations of divalent/monovalent cations in the contacting buffer. In the presence of 10 mM CaCl2, a current increase of up to ≈ 240% was observed, probably due to an intra-complexation reaction between Ca2+ and the aspartate/glutamate residues found at the interface between the dehydrogenase domain and the cytochrome domain of FDH. Contrary to CaCl2, addition of MgCl2 did not show any particular influence, whereas addition of monovalent cations (Na+ or K+) led to a slight linear increase in the maximum response current. To complement the amperometric investigations, spectrophotometric assays were carried out under homogeneous conditions in the presence of a 1-electron non-proton-acceptor, cytochrome c, or a 2-electron-proton acceptor, 2,6-dichloroindophenol (DCIP), respectively. In the case of cytochrome c, it was possible to observe a remarkable increase in the absorbance up to 200% when 10 mM CaCl2 was added. However, by further increasing the concentration of CaCl2 up to 50 mM and 100 mM, a decrease in the absorbance with a slight inhibition effect was observed for the highest CaCl2 concentration. Addition of MgCl2 or of the monovalent cations shows, surprisingly, no effect on the electron transfer to the electron acceptor. Contrary to the case of cytochrome c, with DCIP none of the cations tested seem to affect the rate of catalysis. In order to correlate the results obtained by amperometric and spectrophotometric measurements, CD experiments have been performed showing a great structural change of FDH when increasing the concentration CaCl2 up to 50 mM, at which the enzyme molecules start to agglomerate, hindering the substrate access to the active site probably due to a chelation reaction occurring at the enzyme surface with the glutamate/aspartate residues. Graphical Abstract Fructose dehydrogenase (FDH) consists of three subunits, but only two are involved in the electron transfer process: (I) 2e-/2H+ fructose oxidation, (II) internal electron transfer (IET), (III) direct electron transfer (DET) through 2 heme c; FDH activity either in solution or when immobilized onto an electrode surface is enhanced about 2.5-fold by adding 10 mM CaCl2 to the buffer solution, whereas MgCl2 had an "inhibition" effect. Moreover, the additions of KCl or NaCl led to a slight current increase.