Using the fundamentals of adsorption to understand peak distortion due to strong solvent effect in hydrophilic interaction chromatography.

The peak distortion observed in hydrophilic interaction chromatography (HILIC) may be caused by the sample diluent to mobile phase mismatch. The United States Pharmacopeia (USP) method for organic impurities in cetirizine HCl tablets calls for such a mismatch, having a higher concentration of strong solvent in the sample diluent than in the mobile phase. A significant peak deformation is reported for cetirizine (a second-generation antihistamine) when it is purified on a Ethylene Bridged Hybrid (BEH) HILIC column (4.6mm×100mm, 2.5µm particles) using an acetonitrile-water eluent mixture and a sample diluent containing 7% and 9% water (in volume), respectively. The mechanism and physical origin of such peak distortion are related to (1) the diluent-to-eluent excess of water that propagates along the column at a velocity similar to that of the analyte, (2) the significant drop of the Henry's constant of the analyte upon increasing water concentration in the eluent, (3) the sample volume injected, and (4) to the pre-column sample dilution factor that depends on the characteristics of the LC instrument used. This proposed mechanism is validated from the calculation of the concentration profiles of cetirizine and water by using the equilibrium-dispersive (ED) model of chromatography. The observed distortion of cetirizine peaks is successfully predicted from the measurement of (1) the excess adsorption isotherm of water from acetonitrile onto the BEH HILIC adsorbent, (2) the retention factor of cetirizine as a function of the volume fraction (7, 8, and 9%) of water in the mobile phase, and (3) of the pre-column sample dispersion related to the instrument used (HPLC or UHPLC). The results of the calculations enables the user to anticipate the impacts of the diluent-to-eluent mismatch in water content, the injection volume, the analyte retention under infinite dilution, and of the pre-column sample dispersion on the amplitude of peak distortion in HILIC. Appropriate and permitted alterations of the USP method are then suggested based on a sound physico-chemical approach.

Development of a validated capillary electrophoresis method for enantiomeric purity control and quality control of levocetirizine in a pharmaceutical formulation.

A chiral capillary electrophoresis method has been developed for the quantification of 0.1% of the enantiomeric impurity (dextrocetirizine) in levocetirizine and determination of both in pharmaceuticals using sulfated-ß-cyclodextrins (CDs) as chiral selector. Several parameters affecting the separation were studied such as the type and concentration of chiral selectors, buffer composition and pH, organic modifier, mixtures of two CDs in a dual system, voltage, and temperature. The optimal separation conditions were obtained using a 50 mM tetraborate buffer (pH 8.2) containing 1% (w/v) sulfated-ß-CDs on a fused-silica capillary. Under these conditions, the resolution of two enantiomers was higher than 3. To validate the method, the stability of the solutions, robustness (two level half fraction factorial design for 5 factors using 19 experiments [2(n-1)+3]), precision, linearity (dextrocetirizine 0.25-2.5 µg/ml, R(2) = 0.9994, y = 0.0375x + 0.0008; levocetirizine 15-100 µg/ml, R(2) = 0.9996, y = 0.0213x + 0.0339), limit of detection (0.075 µg/ml, 0.03% m/m), limit of quantification (0.25 µg/ml, 0.1% m/m), accuracy (dextrocetirizine 84-109%, levocetirizine 97.3-103.1%), filter effect, and different CD batches were examined. The validated method was further applied to bulk drug and tablets of levocetirizine.

[Study on the enantiomer separation of cetirizine dihydrochloride using proteinate- and amylose-based chiral stationary phase].

AIM: To study the chromatographic behavior of cetirizine dihydrochloride on the proteinate- and amylose- based chiral stationary phases so as to optimizate the chromatographic condition of its enantiomers separation. METHODS: When using amylose-based, alpha1-acid glycoprotein and ovomucoid protein chiral stationary phase, the mobile phase was hexane-isopropyl alcohol-alcohol-trifluoroacetic acid (430:45:25:1), acetonitrile-10 mmol x L(-1) phosphate buffer solution (adjusted to pH 7.0 with sodium hydroxide) (4:96) and acetonitrile-20 mmol x L(-1) KH, PO4 solution (adjusted to pH 7.0 with triethylamine) (12.7:87.3), respectively. The temperature of proteinate column was 25 degrees C. The detective wavelength was 230 nm. RESULTS: The two enantiomers could be separated on the two kinds of chiral stationary phases without derivatization and the resolution was above 2.0. The methods developed on the two kinds of chiral stationary phases are accurate, sensitive and specific. CONCLUSION: Both the proteinate- and amylose-based chiral stationary phases can be used to separate the enantiomers of cetirizine.