Prediction of Individual Gas Yields of Supercritical Water Gasification of Lignocellulosic Biomass by Machine Learning Models.

Supercritical water gasification (SCWG) of lignocellulosic biomass is a promising pathway for the production of hydrogen. However, SCWG is a complex thermochemical process, the modeling of which is challenging via conventional methodologies. Therefore, eight machine learning models (linear regression (LR), Gaussian process regression (GPR), artificial neural network (ANN), support vector machine (SVM), decision tree (DT), random forest (RF), extreme gradient boosting (XGB), and categorical boosting regressor (CatBoost)) with particle swarm optimization (PSO) and a genetic algorithm (GA) optimizer were developed and evaluated for prediction of H2, CO, CO2, and CH4 gas yields from SCWG of lignocellulosic biomass. A total of 12 input features of SCWG process conditions (temperature, time, concentration, pressure) and biomass properties (C, H, N, S, VM, moisture, ash, real feed) were utilized for the prediction of gas yields using 166 data points. Among machine learning models, boosting ensemble tree models such as XGB and CatBoost demonstrated the highest power for the prediction of gas yields. PSO-optimized XGB was the best performing model for H2 yield with a test R2 of 0.84 and PSO-optimized CatBoost was best for prediction of yields of CH4, CO, and CO2, with test R2 values of 0.83, 0.94, and 0.92, respectively. The effectiveness of the PSO optimizer in improving the prediction ability of the unoptimized machine learning model was higher compared to the GA optimizer for all gas yields. Feature analysis using Shapley additive explanation (SHAP) based on best performing models showed that (21.93%) temperature, (24.85%) C, (16.93%) ash, and (29.73%) C were the most dominant features for the prediction of H2, CH4, CO, and CO2 gas yields, respectively. Even though temperature was the most dominant feature, the cumulative feature importance of biomass characteristics variables (C, H, N, S, VM, moisture, ash, real feed) as a group was higher than that of the SCWG process condition variables (temperature, time, concentration, pressure) for the prediction of all gas yields. SHAP two-way analysis confirmed the strong interactive behavior of input features on the prediction of gas yields.

Ultrathin Boundary-Less SnO2 Films with Surface-Activated Two-Dimensional Nanograins Enable Fast and Sensitive Hydrogen Gas Sensing.

Fast and reliable semiconductor hydrogen sensors are crucially important for the large-scale utilization of hydrogen energy. One major challenge that hinders their practical application is the elevated temperature required, arising from undesirable surface passivation and grain-boundary-dominated electron transportation in the conventional nanocrystalline sensing layers. To address this long-standing issue, in the present work, we report a class of highly reactive and boundary-less ultrathin SnO2 films, which are fabricated by the topochemical transformation of 2D SnO transferred from liquid Sn-Bi droplets. The ultrathin SnO2 films are purposely made to consist of well-crystallized quasi-2D nanograins with in-plane grain sizes going beyond 30 nm, whereby the hydroxyl adsorption and grain boundary side-effects are effectively suppressed, giving rise to an activated (101)-dominating dangling-bond surface and a surface-controlled electrical transportation with an exceptional electron mobility of 209 cm2 V-1 s-1. Our work provides a new cost-effective strategy to disruptively improve the gas reception and transduction of SnO2. The proposed chemiresistive sensors exhibit fast, sensitive, and selective hydrogen sensing performance at a much-reduced working temperature of 60 °C. The remarkable sensing performance as well as the simple and scalable fabrication process of the ultrathin SnO2 films render the thus-developed sensors attractive for long awaited practical applications in hydrogen-related industries.

The delayed senescence in harvested blueberry by hydrogen-based irrigation is functionally linked to metabolic reprogramming and antioxidant machinery.

Molecular hydrogen is beneficial for fruits quality improvement. However, the mechanism involved, especially cellular metabolic responses, has not been well established. Here, the integrated widely targeted metabolomics analysis (UPLC-MS/MS) and biochemical evidence revealed that hydrogen-based irrigation could orchestrate, either directly or indirectly, an array of physiological responses in blueberry (Vaccinium spp.) during harvesting stage, especially for the delayed senescence in harvested stage (4 °C for 12 d). The hubs to these changes are wide-ranging metabolic reprogramming and antioxidant machinery. A total of 1208 distinct annotated metabolites were identified, and the characterization of differential accumulated metabolites (DAMs) revealed that the reprogramming, particularly, involves phenolic acids and flavonoids accumulation. These changes were positively matched with the transcriptional profiles of representative genes for their synthesis during the growth stage. Together, our findings open a new window for development of hydrogen-based agriculture that increases the shelf-life of fruits in a smart and sustainable manner.

The role of hydrogen-rich water in delaying the pulp breakdown of litchi fruit during postharvest storage.

Previous studies have indicated that hydrogen-rich water (HW) treatment can delay fruit ripening and senescence. However, little is known about the HW-delaying pulp breakdown. In this study, eight physiological characteristics revealed that HW treatment delayed both pericarp browning and pulp breakdown of litchi fruit. To gain a comprehensive understanding of the changes in litchi pulp, a combination of multiple metabolomics and gene expression analyses was conducted, assessing 67 primary metabolites, 103 volatiles, 31 amino acids, and 13 crucial metabolite-related genes. Results showed that HW treatment promoted starch degradation, decelerated cell wall degradation and glycolysis, and maintained the flavor and quality of litchi fruit. Furthermore, HW treatment stimulated the production of volatile alcohols, aldehydes, ketones, olefins, and amino acids, which might play a vital role in HW-delaying pulp breakdown. This study sheds light on the mechanism by which HW delayed pulp breakdown by investigating small molecule metabolites and metabolic pathways.

Fructose malabsorption and fructan malabsorption are associated in patients with irritable bowel syndrome.

BACKGROUND: Food malabsorption and intolerance is implicated in gastrointestinal symptoms among patients with irritable bowel syndrome (IBS). Key triggers include fructose and fructan. Prior studies examined fructose and fructan malabsorption separately in IBS patients. None have concurrently assessed both within the same patient group. We aimed to investigate the association between fructose and fructan malabsorption in the same patients with IBS using hydrogen breath testing (HBT). METHODS: We retrospectively identified patients with IBS who underwent fructose and fructan HBTs and abstracted their results from the electronic medical record. Fructose and fructan HBTs were performed by administering a 25 g fructose solution or 10 g fructan solution, followed by breath hydrogen readings every 30 min for 3 h. Patients were positive for fructose or fructan malabsorption if breath hydrogen levels exceeded 20 ppm. RESULTS: Of 186 IBS patients, 71 (38.2%) were positive for fructose malabsorption and 91 (48.9%) were positive for fructan malabsorption. Of these patients, 42 (22.6%) were positive for fructose malabsorption and fructan malabsorption. Positive fructose HBT readings were significantly associated with positive fructan HBT readings (p = 0.0283). Patients positive for fructose malabsorption or fructan malabsorption had 1.951 times higher odds of testing positive for the other carbohydrate. CONCLUSIONS: Our results reveal a clinically significant association between fructose malabsorption and fructan malabsorption in patients with IBS. Fructan malabsorption should be assessed in patients with fructose malabsorption, and vice versa. Further studies are required to identify the mechanisms underlying our findings.

Incorporation of hydrogen-producing magnesium into minced beef meat protects the quality attributes and safety of the product during cold storage.

The impact of hydrogen (H2) producing magnesium (Mg) incorporation into minced beef meat (MBM) on the quality and safety of the product was investigated. The H2-producing Mg (H2-P-Mg)-incorporated MBMs were vacuumed (VP) and stored at 4 °C for 12 days. Other MBMs were vacuumed and gassed with H2 or N2. At the end of storage, the lowest browning index values were for H2 and H2-P-Mg samples. H2- PMg and VP methods generally decreased the counts of mesophilic and psychrotrophic bacteria and yeast molds and restricted the formation of thiobarbituric acid reactive substances and biogenic amines. Heat mapping, PCA, and multivariate analysis methods confirmed chemical analysis results. The volatile compounds were at their highest levels in the control samples at the end of storage, followed by H2, N2, H2-P-Mg, and VP samples. Using the H2-P-Mg method in MBM preparation could protect the quality characteristics and safety of the product during cold storage.

Glucose breath test for the detection of small intestine bacterial overgrowth: Impact of diet prior to the test.

BACKGROUND: Glucose breath test (GBT) is used for the diagnosis of small intestine bacterial overgrowth. A restrictive diet without fibers and/or fermentable food is recommended on the day before the test. The aim of our retrospective study was to evaluate the impact of two different restrictive diets on the results of GBT. METHODS: A change of the pretest restrictive diet was applied in our lab on September 1, 2020. The recommended diet was a fiber-free diet before this date, and a fiber-free diet plus restriction of all fermentable food afterward. We thus compared the results of GBT performed before (group A) and after (group B) this pretest diet modification. Demographics, reasons to perform GBT, digestive symptoms, and hydrogen and methane baseline values and variations after glucose ingestion were compared between the two groups. KEY RESULTS: 269 patients underwent GBT in group A, and 316 patients in group B. The two groups were comparable in terms of demographics. Methane and hydrogen baseline values were significantly higher in group A (respectively 14 [18] vs. 8 [14] ppm, p < 0.01 and 11 [14] vs. 6 [8] ppm, p < 0.01). The percentage of positive tests was higher in group A for methane (43% vs. 28%, p < 0.05), and for hydrogen (18% vs. 12%, p = 0.03). CONCLUSION & INFERENCES: This retrospective study suggests the importance of the restrictive diet prior to GBT. A strict limitation of fibers and fermentable food decreased hydrogen and methane baseline values, and the prevalence of positive GBT. Thus a strict restrictive diet should be recommended on the day before the test, in order to limit the impact of food on hydrogen and methane breath levels, and possibly improve the diagnosis quality of GBT.

Strategies to enhance biohydrogen production from microalgae: A comprehensive review.

Microalgae represent a promising renewable feedstock for the sustainable production of biohydrogen. Their high growth rates and ability to fix carbon utilizing just sunlight, water, and nutrients make them well-suited for this application. Recent advancements have focused on improving microalgal hydrogen yields and cultivation methods. This review aims to summarize recent developments in microalgal cultivation techniques and genetic engineering strategies for enhanced biohydrogen production. Specific areas of focus include novel microalgal species selection, immobilization methods, integrated hybrid systems, and metabolic engineering. Studies related to microalgal strain selection, cultivation methods, metabolic engineering, and genetic manipulations were compiled and analyzed. Promising microalgal species with high hydrogen production capabilities such as Synechocystis sp., Anabaena variabilis, and Chlamydomonas reinhardtii have been identified. Immobilization techniques like encapsulation in alginate and integration with dark fermentation have led to improved hydrogen yields. Metabolic engineering through modulation of hydrogenase activity and photosynthetic pathways shows potential for enhanced biohydrogen productivity. Considerable progress has been made in developing microalgal systems for biohydrogen. However, challenges around process optimization and scale-up remain. Future work involving metabolic modeling, photobioreactor design, and genetic engineering of electron transfer pathways could help realize the full potential of this renewable technology.

Waste-derived catalysts for tar cracking in hot syngas cleaning.

Catalytic tar cracking is a promising technique for hot syngas cleaning unit in gasification plants because it can preserve tars chemical energy, so increasing the syngas heating value. The cost associated with catalyst preparation is a key issue, together with its deactivation induced by coke deposition. Iron is a cheap and frequently used catalyst, which can also be found in some industrial wastes. The study aims to assess the catalytic efficiency for tar cracking of two waste-derived materials (red mud and sewage sludge) having high content of iron. The catalysts were supported on spheres of γ-Al2O3, and their efficiency was compared to that of a pure iron catalyst. The role of support was investigated by testing pure red mud, with and without the support. A series of long-term tests using naphthalene as tar model compound were carried out under different values of process temperatures (750 °C-800 °C) and steam concentrations (0 %-7.5 %). The waste derived catalysts showed lower hydrogen yields compared to pure iron catalyst, due to their lower content of iron. On the other hand, the conversion efficiencies of all the tested catalysts resulted rather similar, since the Alkali and Alkaline-Earth Metallic species present on the surface of waste-derived catalyst help in preventing coke deposition. The iron oxidation state appears to play an important role, with reduced iron more active than its oxidised form in the tar cracking reactions. This indicates the importance of tuning steam concentration to keep constant the reduced state of iron while limiting coke deposition.

Enhanced response of WO3 thin film through Ag loading towards room temperature hydrogen gas sensor.

This study investigates the enhancement of hydrogen gas-sensing performance by introducing silver (Ag) nanoparticles onto tungsten trioxide (WO3) thin films. Herein, the WO3 thin films are deposited onto SiO2/Si substrates using a sputtering technique and Ag nanoparticles are loaded onto the WO3 surface through a spin coating technique. To evaluate the sensing performance of a hydrogen gas, interdigitated titanium (Ti) electrodes are deposited onto the Ag:WO3 layer. Structural, chemical, and morphological analyses are conducted for both pristine WO3 and Ag:WO3 thin films, followed by the investigation of gas-sensing performance by varying hydrogen gas concentrations from 100 ppm to 300 ppm and operating temperatures between 30 °C and 300 °C. The obtained results demonstrate that Ag:WO3 thin films exhibit a notably enhanced response of 5.08% when exposed to a concentration of 100 ppm of hydrogen gas at room temperature, compared to the pristine WO3 of 3.40%. The fabricated Ag:WO3 sensor exhibits a response time of 3.0 s, a recovery time of 4.5 s, and also demonstrates excellent stability over 45 days period. Finally, with the superior sensitivity and fast response time, the fabricated Ti/Ag:WO3/Ti hydrogen gas sensor test-device can be a potential for improvement of safety from both industrial and environmental perspectives.

A bibliometric analysis of the role of nanotechnology in dark fermentative biohydrogen production.

Recently, nanoparticles have drawn a lot of interest as catalysts to enhance the effectiveness and output of biohydrogen generation processes. This review article provides a comprehensive bibliometric analysis of the significance of nanotechnology in dark fermentative biohydrogen production. The study examines the scientific literature from the database of The Web of Science© while the bibliometric investigation utilized VOSviewer© and Bibliometrix software tools to conduct the analysis. The findings revealed that a total of 232 articles focused on studying dark fermentation for hydrogen production throughout the entire duration. The extracted data was used to analyze publication trends, authorship patterns, and geographic distribution along with types and effects of nanoparticles on the microbial community responsible for dark fermentative biohydrogen production. The findings of this bibliometric analysis provide valuable insights into the advancements and achievements in the utilization of nanoparticles in the dark fermentation process used to produce biohydrogen.

Enhancing biohydrogen production from xylose through natural FeS2 ore: Mechanistic insights.

In this study, we investigated the advantages of utilizing natural FeS2 ore in the context of dark fermentative hydrogen production within a fermentation system employing heat-treated anaerobic granular sludge with xylose as the carbon source. The results demonstrated a significant improvement in both hydrogen production and the maximum rate, with increases of 2.58 and 4.2 times, respectively. Moreover, the presence of FeS2 ore led to a reduction in lag time by more than 2-3 h. The enhanced biohydrogen production performance was attributed to factors such as the intracellular NADH/NAD+ ratio, redox-active components of extracellular polymeric substances, secreted flavins, as well as the presence of hydrogenase and nitrogenase. Furthermore, the FeS2 ore served as a direct electron donor and acceptor during biohydrogen production. This study shed light on the underlying mechanisms contributing to the improved performance of biohydrogen production from xylose during dark fermentation through the supplementation of natural FeS2 ore.

Continuous planting of Chinese fir monocultures significantly influences dissolved organic matter content and microbial assembly processes.

Monoculture plantations in China, characterized by the continuous cultivation of a single species, pose challenges to timber accumulation and understory biodiversity, raising concerns about sustainability. This study investigated the impact of continuous monoculture plantings of Chinese fir (Cunninghamia lanceolata [Lamb.] Hook.) on soil properties, dissolved organic matter (DOM), and microorganisms over multiple generations. Soil samples from first to fourth-generation plantations were analyzed for basic chemical properties, DOM composition using Fourier transform ion cyclotron resonance mass spectrometry, and microorganisms via high-throughput sequencing. Results revealed a significant decline in nitrate nitrogen content with successive rotations, accompanied by an increase in easily degradable compounds like carbohydrates, aliphatic/proteins, tannins, Carbon, Hydrogen, Oxygen and Nitrogen- (CHON) and Carbon, Hydrogen, Oxygen and Sulfur- (CHOS) containing compounds. However, the recalcitrant compounds, such as lignin and carboxyl-rich alicyclic molecules (CRAMs), condensed aromatics and Carbon, Hydrogen and Oxygen- (CHO) containing compounds decreased. Microorganism diversity, abundance, and structure decreased with successive plantations, affecting the ecological niche breadth of fungal communities. Bacterial communities were strongly influenced by DOM composition, particularly lignin/CRAMs and tannins. Continuous monoculture led to reduced soil nitrate, lignin/CRAMs, and compromised soil quality, altering chemical properties and DOM composition, influencing microbial community assembly. This shift increased easily degraded DOM, accelerating soil carbon and nitrogen cycling, ultimately reducing soil carbon sequestration. From environmental point of view, the study emphasizes the importance of sustainable soil management practices in continuous monoculture systems. Particularly the findings offer valuable insights for addressing challenges associated with monoculture plantations and promoting long-term ecological sustainability.

Added Value of 13C Analysis in Breath Tests in H2-Negative Subjects to Diagnose Lactose Malabsorption: A Proof of Concept Study.

INTRODUCTION: Diagnosing lactose malabsorption is usually based on hydrogen excretion in breath after a lactose challenge. However, a proportion of subjects with lactose malabsorption will not present a rise in hydrogen. Measuring excretion of methane or stable isotope labeled 13CO2 after ingestion of 13C-lactose has been proposed to mitigate this problem. OBJECTIVE: The aim of the study was to assess the performance of measuring methane and 13CO2 in individuals with normal hydrogen excretion compared to a genetic lactase non-persistence test. METHODS: Individuals referred for lactose breath testing and healthy controls were included. Participants received 13C-enriched lactose, performed breath testing, and underwent genotyping for a marker of lactase non-persistence (13910C*T). Using genotype as gold standard, the performance of measuring methane and 13CO2 excretion was assessed. RESULTS: 151 subjects participated in the study, 50 of which presented a lactase non-persistent genotype. Of these, 72% were correctly diagnosed through hydrogen excretion of ≥ 20 ppm above baseline. In subjects with normal hydrogen excretion, cumulative 13C excretion had an area under the curve (AUC) of the receiver operating characteristics (ROC) curve of 0.852. Sensitivity was 93% and specificity was 51% for the current cutoff of 14.5%. The optimal cutoff was 12.65% (sensitivity 93%, specificity 70%). The ROC curve of peak methane had an AUC of 0.542 (sensitivity of 14%, specificity of 91% for cutoff ≥ 10 ppm). CONCLUSIONS: In individuals with genetically demonstrated lactase non-persistence and negative hydrogen breath test, the use of 13C-lactose with measurement of 13CO2 excretion and hydrogen is a well-performing test to detect the lactose malabsorption and performs better than methane in our cohort.

Estuarine hydrodynamic processes driving the molecular changes of terrestrial dissolved organic nitrogen: From mixing to biological modification.

Estuaries receive substantial amounts of terrestrial dissolved organic nitrogen (tDON), which will be transported from the freshwater to the oceanic terminus through vigorous exchange processes. However, the intricate migration and transformation dynamics of tDON during this transportation, particularly at a molecular level, remain constrained. To address this knowledge gap, Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used for the analysis of DON molecular composition in the Pearl River Estuary (PRE), a river-dominated estuarine system influenced by intensified anthropogenic activities in southern China. The results showed a pronounced spatial-temporal variation in DON concentration in the study area. At the molecular level, tDON exhibited reduced unsaturation and aromaticity, coupled with an elevated abundance of DON compounds containing one­nitrogen atom (1 N-DON, 53.17 %) and compounds containing carbon, hydrogen, oxygen, nitrogen, and sulfur (CHONS) (27.46 %). It was evident that lignin was depleted while more oxygenated tannin compounds were generated in the freshwater-seawater mixing zone. This transformation is attributed to heightened biological activities, likely influenced by the priming effect of terrestrial nutrient inputs. In summer, the prevailing plume combined with biological activities in the strong mixing area and outer estuary increased the abundance of 3 N-DON molecules and a concurrent rise in the abundance of DON compounds containing only carbon, hydrogen, oxygen, and nitrogen (CHON), DON compounds containing carbon, hydrogen, oxygen, nitrogen, sulfur, and phosphorus (CHONSP), and CHONS. This trend also underscores the expanding role of marine plankton and microbes in the utilization of DON compounds containing carbon, hydrogen, oxygen, nitrogen, and phosphorus (CHONP). These findings provide details of tDON transformation processes at the molecular level in a river-dominated estuary and underline the estuarine hydrodynamics involved in transporting and altering DON within the estuary.

Response of TCE biodegradation to elevated H2 and O2: Implication for electrokinetic-enhanced bioremediation.

The study investigated the influences of pure H2 and O2 introduction, simulating gases produced from the electrokinetic-enhanced bioremediation (EK-Bio), on TCE degradation, and the dynamic changes of the indigenous microbial communities. The dissolved hydrogen (DH) and oxygen (DO) concentrations ranged from 0.2 to 0.7 mg/L and 2.6 to 6.6 mg/L, respectively. The biological analysis was conducted by 16S rRNA sequencing and functional gene analyses. The results showed that the H2 introduction enhanced TCE degradation, causing a 90.4% TCE removal in the first 4 weeks, and 131.1 µM was reduced eventually. Accordingly, cis-dichloroethylene (cis-DCE) was produced as the only product. The following three ways should be responsible for this promoted TCE degradation. Firstly, the high DH rapidly reduced the oxidation-reduction potential (ORP) value to around -500 mV, beneficial to TCE microbial dechlorination. Secondly, the high DH significantly changed the community and promoted the enrichment of TCE anaerobic dechlorinators, such as Sulfuricurvum, Sulfurospirillum, Shewanella, Geobacter, and Desulfitobacterium, and increased the abundance of dechlorination gene pceA. Thirdly, the high DH promoted preferential TCE dechlorination and subsequent sulfate reduction. However, TCE bio-remediation did not occur in a high DO environment due to the reduced aerobic function or lack of functional bacteria or co-metabolic substrate. The competitive dissolved organic carbon (DOC) consumption and unfriendly microbe-microbe interactions also interpreted the non-degradation of TCE in the high DO environment. These results provided evidence for the mechanism of EK-Bio. Providing anaerobic obligate dechlorinators, and aerobic metabolic bacteria around the electrochemical cathodes and anodes, respectively, or co-metabolic substrates to the anode can be feasible methods to promote remediation of TCE-contaminated shallow aquifer under EK-Bio technology.

Beyond helium: hydrogen as a carrier gas in multiresidue pesticide analysis in fruits and vegetables by GC-MS/MS.

In this comprehensive study, we evaluated the feasibility of using hydrogen instead of helium as a carrier gas in a GC-MS/MS system for pesticide residue analysis, spanning three matrices: pepper, tomato, and zucchini. Initial assessments focused on the ion source's chemical inertness, employing nitrobenzene as a benchmark to monitor the hydrogenation process. A method with a duration of less than 12 minutes was developed, achieving good chromatographic peak resolution attributable to the enhanced chromatographic performance of hydrogen as a carrier gas. The study emphasized the optimization of system parameters, testing various ion source temperatures, detector voltages, and injection volumes. Sensitivity assessments, based on the DG-SANTE criteria, indicated that the majority of compounds were identifiable at a concentration of 5 µg kg-1 (81% in tomato, 84% in pepper and 73% in zucchini). Detailed validation for reproducibility, matrix effects, and linearity across 150 pesticides unveiled generally favorable outcomes, with a notable majority of compounds displaying low matrix effects, satisfactory linearity ranges and good reproducibility with most compounds returning a relative standard deviation (RSD) below 10%. When applied to 15 real samples, the hydrogen-based system's performance was juxtaposed against a helium-based counterpart, revealing that results are very comparable between both systems. This comparative approach highlights hydrogen's potential as a reliable and efficient carrier gas in pesticide residue analysis for routine food control laboratories, overcoming difficulties resulting from the lack of helium supplies.

Dark fermentation of pretreated hydrolysates of pineapple fruit waste for the production of biohydrogen using bacteria isolated from wastewater sources.

In the present study, both acidic and alkaline hydrolysate of pineapple waste was utilised for the production of biohydrogen using locally isolated bacterial strains. The bacteria were isolated from different wastewater sources and were identified as Proteus mirabilis, Pseudomonas aeruginosa, Bacillus altitudinus, Bacillus subtilis, Paenibacillus alvei, and Lysinibacillus sphaericus. Experimental results showed that the highest biohydrogen yield of 836.33 ± 48.02 mL H2 was produced from alkaline hydrolysate with Bacillus altitudinis during the 96thhr of fermentation. Among the different bacterial strains, B. altitudinis showed higher H2 production. Comparatively alkaline hydrolysates exhibited a higher yield of hydrogen than acidic hydrolysates. The final pH of the experiment was found to be in acidic range. The total VFA concentration ranged between 930 ± 207.85 mg/L to 3050 ± 476.97 mg/L. Both sugar degradation and COD reduction were more than 80% in the acidic and alkaline hydrolysates while the lowest sugar degradation and COD reduction were observed for the untreated biomass. The rationale behind this study was to convert the waste biomass into energy by utilising the potential of native bacterial communities.

Using landfill leachate to indicate the chemical and biochemical activities in elevated temperature landfills.

Landfill leachate properties contain important information and can be a unique indicator for the chemical and biochemical activities in landfills. In the recent decade, more landfills are experiencing elevated temperature, causing an imbalance in the decomposition of solid waste and affecting the properties of the landfill leachate. This study analyzes the properties of leachate from two landfills that were experiencing elevated temperature (ETLFs), samples were collected from both elevated temperature impacted and non-impacted areas in each landfill. The accumulation of volatile fatty acids (VFA) in leachates from elevated temperature impacted areas of both landfill sites revealed that methanogenesis was inhibited by the elevated temperature, which was further confirmed by the more acidic pH, higher H/C elemental ratio, and lower degree of aromaticity of the elevated temperature impacted leachates. Also, carbohydrates depletion indicated possible enhancement of hydrolysis and acidogenesis by elevated temperature, which was supported by compositional comparison of isolated acidic species by negative-ion electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICRMS) at 21 T derived from both elevated temperature impacted and non-impacted areas in the same landfill site. Furthermore, leachate organics fractionation showed that leachates not impacted by elevated temperature contain less hydrophilic fraction and more humic fraction than elevated temperature-impacted leachates for both ETLFs.

Sustainable hydrogen production via microalgae: Technological advancements, economic indicators, environmental aspects, challenges, and policy implications.

Hydrogen has emerged as an alternative energy source to meet the increasing global energy demand, depleting fossil fuels and environmental issues resulting from fossil fuel consumption. Microalgae-based biomass is gaining attention as a potential source of hydrogen production due to its green energy carrier properties, high energy content, and carbon-free combustion. This review examines the hydrogen production process from microalgae, including the microalgae cultivation technological process for biomass production, and the three main routes of biomass-to-hydrogen production: thermochemical conversion, photo biological conversion, and electrochemical conversion. The current progress of technological options in the three main routes is presented, with the various strains of microalgae and operating conditions of the processes. Furthermore, the economic and environmental perspectives of biomass-to-hydrogen from microalgae are evaluated, and critical operational parameters are used to assess the feasibility of scaling up biohydrogen production for commercial industrial-scale applications. The key finding is the thermochemical conversion process is the most feasible process for biohydrogen production, compared to the pyrolysis process. In the photobiological and electrochemical process, pure hydrogen can be achieved, but further process development is required to enhance the production yield. In addition, the high production cost is the main challenge in biohydrogen production. The cost of biohydrogen production for direct bio photolysis it cost around $7.24 kg-1; for indirect bio photolysis it costs around $7.54 kg-1 and for fermentation, it costs around $7.61 kg-1. Therefore, comprehensive studies and efforts are required to make biohydrogen production from microalgae applications more economical in the future.