A case report of cryptococcosis in a captive Cape hyrax (Procavia capensis).

Cryptococcosis, a globally distributed mycotic disease caused by Cryptococcus neoformans or C. gattii, has been extensively studied in various domestic animals and humans. However, non-domestic species have often been overlooked in the literature, with limited attention given to their susceptibility and contribution to the epidemiology of the disease. In this study, a captive two-year-old Cape hyrax in a Japanese zoo exhibited neurological symptoms and torticollis, ultimately succumbing to the infection. Necropsy and pathological analyses, including histopathological techniques and PCR, revealed the presence of C. neoformans in the lungs, cerebrum, and internal auditory canal. While cryptococcosis has been reported in various wild animals globally, this case represents the first documented cryptococcosis in Cape hyrax.

Comparison of 3D-printed and laboratory-fabricated Hyrax on stress distribution and displacement of the maxillary complex: a 3D finite element study.

OBJECTIVE: To analyze and compare the effects of a traditional laboratory-fabricated Hyrax expander (T-Hyrax) and two different 3D-printed Hyrax expander models relative to tension points, force distribution, and areas of concentration in the craniofacial complex during maxillary expansion using finite element analysis. MATERIALS AND METHODS: Three maxillary expanders with similar designs, but various alloys were modeled: a T-Hyrax, a fully printed Hyrax (F-Hyrax), and a hybrid printed Hyrax (H-Hyrax). The stress distributions and magnitude of displacements were assessed with a 5 mm expansion in a symmetrical finite element model. The areas of interest included the teeth, alveolar processes, midpalatal suture, nasal complex, circummaxillary sutures (CS), and the expanders themselves. RESULTS: The highest stress value (29.2 MPa) was found at the midpalatal suture of the F-Hyrax, while the lowest stress (0.90 MPa) was found at the temporozygomatic suture in the T-Hyrax. On average, the F-Hyrax increased stress at the CS by 24.76% compared with the T-Hyrax and H-Hyrax. The largest displacements were found at the upper incisor (U1) and anterior nasal spine (ANS). The findings indicated an average increase of 12.80% displacement at the CS using the F-Hyrax compared to the T-Hyrax. CONCLUSION: The F-Hyrax exerts more stress and displacement on the maxilla than both the T-Hyrax and H-Hyrax, where the weak link appears to be the solder joint.

Effects of Calcitonin Administration on the Amount of Bone Formation After Sutural Expansion Using Micro-CT.

OBJECTIVE: Calcitonin injections were used in this investigation to see whether they influenced the quantity of bone formation after a rabbit model was subjected to micro-computed tomography expansion. MATERIALS AND METHODS: Research was conducted on a total of 16 white male rabbits. Randomly, 4 groups of 4 rabbits each had their bone-borne expanders triggered by the Hyrax appliances as follows: In the first group (the control), the expansion was (0.5) mm per day for 12 days. In the second group, the same expansion protocol was used with 3 subcutaneous injections of calcitonin). In the third group, the expansion was (2.5) mm per day for 7 days followed by (0.5) mm per day for 7 days. In the fourth group, the same expansion protocol was used with 3 subcutaneous injections of calcitonin. As a result, all groups had their Hyrax devices expanded by 6 mm in total. Sutural separation and new bone growth were examined by micro-computed tomography after 6 weeks of retention. To end the experiment, the rabbits were given a high dosage of phenobarbitone (90 mg/kg). RESULTS: In the calcitonin-receiving group, there was a significant increase in anterior and posterior sutural separation, when compared with non-calcitonin-receiving groups. In the (2.5) mm instant expansion protocol, there was a significant increase in anterior and posterior sutural separation, when compared with the (0.5) mm instant expansion protocol. CONCLUSION: Calcitonin and the instant expansion protocol enhance new bone formation in rabbits.

The interaction between cortisol and testosterone predicts leadership within rock hyrax social groups.

Group movement leadership is associated with higher risks for those in the front. Leaders are the first to explore new areas and may be exposed to predation. Individual differences in risk-taking behavior may be related to hormonal differences. In challenging circumstances, such as risk-taking leadership that may pose a cost to the leader, cortisol is secreted both to increase the likelihood of survival by restoring homeostasis, and to mediate cooperative behavior. Testosterone too has a well-established role in risk-taking behavior, and the dual-hormone hypothesis posits that the interaction of testosterone and cortisol can predict social behavior. Based on the dual-hormone hypothesis, we investigated here whether the interaction between testosterone and cortisol can predict risk-taking leadership behavior in wild rock hyraxes (Procavia capensis). We used proximity loggers, observations, and playback trials to characterize hyrax leaders in three different leadership contexts that varied in their risk levels. In support of the dual-hormone hypothesis, we found that cortisol and testosterone interactions predict leadership that involves risk. Across different circumstances that involved low or high levels of risk, testosterone was positively related to leadership, but only in individuals (both males and females) with low levels of cortisol. We also found an interaction between these hormone levels and age at the low-risk scenarios. We suggest that the close social interactions and affiliative behavior among hyrax females within small egalitarian groups may make female leadership less risky, and therefore less stressful, and allow female leaders to influence group activities.

Short-term assessment of pain and discomfort during rapid maxillary expansion with tooth-bone-borne and tooth-borne appliances: randomized clinical trial.

OBJECTIVE: The aim of this randomized clinical trial was to evaluate and compare, during the first week of rapid maxillary expansion (RME), the impact caused by two types of appliances: Hyrax and Hybrid Hyrax. METHODS: Forty-two patients who met the eligibility criteria (aged 11-14 years, with transverse maxillary deficiency, posterior crossbite, and presence of maxillary first premolars and first permanent molars) were selected and randomly divided into two groups: TBB GROUP (tooth-bone-borne expander), treated with Hybrid Hyrax (12 females and 9 males, mean age 13.3 ± 1.3 years), and TB GROUP (tooth-borne expander), treated with Hyrax (5 females and 16 males, mean age 13.3 ± 1.4 years). Pain and discomfort were assessed in two times: after the first day of activation (T1) and four days after, by means of the numerical rate scale and the instrument MFIQ (Mandibular Functional Impairment Questionnaire). Descriptive statistics and the Mann-Whitney test were used for comparison between groups and between sexes. A 5% significance level was adopted. RESULTS: Both appliances had a negative impact, generating pain and discomfort, and reducing functional capacity. However, the scores obtained were of low intensity and no significant differences were observed between the groups. Considering sexes, there were statistically significant differences, with the female sex presenting higher scores for pain and functional limitation. CONCLUSIONS: Despite causing impact in pain and increase in the functional limitation, these changes were of low intensity, with no statistical difference between the groups. Females were more sensitive to the impact caused by the RME.

Effects of novel microimplant-assisted rapid palatal expanders manufactured by 3-dimensional printing technology: A finite element study.

INTRODUCTION: The expansion effects of several new microimplant-assisted rapid palatal expanders (MARPEs) manufactured by 3-dimensional printing technology were evaluated by finite element analysis (FEA). The aim was to identify a novel MARPE suitable for treating maxillary transverse deficiency. METHODS: The finite element model was established using MIMICS software (version 19.0; Materialise, Leuven, Belgium). First, the appropriate microimplant insertion characteristics were identified via FEA, and several MARPEs with the above insertion patterns were manufactured by 3-dimensional printing technology. Then, the stress distribution and displacement prediction of the 4 MARPEs and hyrax expander (model E) were evaluated via FEA: bone-borne (model A), bone-tooth-borne (model B), bone-mucous-borne (model C), bone-tooth-mucous-borne (model D). RESULTS: Monocortical microimplants perpendicular to the cortical bone on the coronal plane resulted in better expansion effects. Compared with a conventional hyrax expander, the orthopedic expansion of each of the 4 MARPEs was far larger, the parallelism was greater, and the posterior teeth tipping rate was lower. Among them, the expansion effects of models C and D were the best; the von Mises peak values on the surfaces of the microimplants were smaller than those of models A and B. CONCLUSIONS: This study may demonstrate that the 4 MARPEs obtained more advantageous orthopedic expansion effects than a hyrax expander. Models C and D obtained better biomechanical effects and had better primary stability. Overall, model D is the recommended expander for treating maxillary transverse deficiency because its structure acts like an implant guide and is beneficial for the accurate insertion of the microimplant.

Dento-skeletal effects of different rapid maxillary expanders for growing patients-which is better?

DESIGN: Single-blind, two-arm parallel-group randomised controlled trial. CASE SELECTION: Patients aged 11-14 years old attending for comprehensive orthodontic treatment between January and July 2018. All subjects needed to have the following: present upper first premolars and first permanent molars; transverse maxillary deficiency; unilateral or bilateral posterior crossbite. The exclusion criteria was: cleft lip or palate, previous orthodontic treatment; congenital deformity; absent permanent teeth. INTERVENTION: Rapid maxillary expansion via two techniques were used and placed by the same orthodontist. Group A were treated via the tooth-bone-borne Hybrid Hyrax expander, Group B had the tooth-borne (hyrax) expander. CBCT scans of the maxilla were taken before treatment and 3 months after the activation phase when the appliances had been removed. DATA ANALYSIS: Analysis of the dental and skeletal changes was completed via measuring pre and post treatment CBCT scans using Dolphin software for Group A and Group B. Measurements included: specific naso-maxillary widths in the first premolar region (i.e. nasal cavity, nasal floor, maxilla, palate), naso-maxillary widths in the first molar region, premolar/molar inclination, buccal cusp distance, and apices distance, as well as suture maturation. Baseline characteristic data was compared using one-way ANOVA. Intergroup comparison of changes was analysed using ANCOVA. P < 0.05 (5%) was considered statistically significant. Inter-rater reliability was assessed using correlation coefficient. RESULTS: Skeletal effects: The Hybrid Hyrax patients (HHG) showed a significantly higher increase in dimensions in the nasal cavity, nasal floor and maxilla in the premolar region only, of 1.5 mm, 1.4 mm and 1.1 mm, respectively, compared to the Hyrax expander patients (HG), to a 5% significance level. The HHG showed a significantly higher increase in dimensions in the nasal cavity of 0.9 mm, in the molar region, compared to the HG. Dental effects: Premolar inclination was significantly higher in the HG, with the difference being -3.2 degrees on the right 1st premolar and -2.5 degrees on the left 1st premolar. The higher the amount of activation, the higher the nasal skeletal changes in the Hybrid Hyrax group. CONCLUSIONS: The Hybrid Hyrax (tooth-bone-borne expander) resulted in increased skeletal dimension changes (i.e. in the nasomaxillary structures in the first premolar region, and nasal cavity in the first molar and first premolar region) and only minimal premolar inclination/tipping compared to the Hyrax (tooth-borne expander). There were however no differences between the expanders for position of premolar or molar apices, or molar crowns.

Male rock hyraxes that maintain an isochronous song rhythm achieve higher reproductive success.

Rhythmic stability (nonrandom temporal structure) is required for many neural and physiological functions, whereas rhythmic irregularities can indicate genetic or developmental deficiencies. Therefore, rhythmic courtship or contest signals are widespread in nature as honest advertisement displays. Examination of bird songs revealed the pervasiveness of categorical rhythmic patterns that can be described as small integer ratios between sequential inter-call intervals. As similar rhythmic profiles are prevalent in human music, it was suggested that a shared functionality could drive both animal songs and human musical rhythms, facilitating synchrony between signallers and enabling easy identification of performance errors. Here we examined whether the rhythmic structure and the rhythmic stability of vocal displays are related to reproductive success in male rock hyraxes (Procavia capensis), which presents an unusual case of a terrestrial singing mammal. We combined long-term parentage analysis of 13 male hyraxes (22 male/years) with an analysis of an audio library of 105 hyrax songs. Male annual reproductive success was determined by the number of offspring that survived to the age of 1 year. The frequency of singing events was used to determine the seasonal singing effort for each male. Songs were analysed for rhythmic structure, focusing on the presence of categorical rhythms and the contribution of rhythmic stability to annual reproductive success. We found that male hyraxes that sing more frequently tend to have more surviving offspring and that the rhythmic profile of hyrax songs is predominantly isochronous with sequential vocal element pairs nearly equally spaced. The ratio of isochronous vocal element transitions (on-integer) to element transitions that deviate from an isochronous pattern (off-integer) in hyrax songs is positively correlated with male reproductive success. Our findings support the notion that isochronous rhythmic stability can serve as an indication of quality in sexually selected signals and is not necessarily driven by the need for multiple caller synchronization. The relative scarcity of nonisochronous rhythmic categories in individually performed hyrax songs raises the question of whether such rhythmic categories could be a product of collective, coordinated signalling, while being selected against in individual performance.

A reproducible and repeatable digital method for quantifying nasal and sinus airway changes following suture palatine expansion.

PURPOSE: The airway complex is modified by palatine expansion. Computer tomography has been used in the past to determine the change in volume, but there was a lack of a specific, reproducible method for this purpose. The present study sought to determine the accuracy, reproducibility, and repeatability of an innovative digital measurement technique for analyzing the volume of maxillary and nasal sinus airways following suture palatine expansion performed with the Hyrax disyuntor appliance. METHODS: Patients underwent preoperative and postoperative cone-beam computed tomography (CBCT) scans. The datasets were subsequently uploaded into a digital treatment planning software to record the volume of the right and left maxillary sinus, as well as the nasal and maxillary sinus airway complex. The Gage Repeatability & Reproducibility statistical analysis methodology was used to evaluate the repeatability and reproducibility of this measurement technique when measuring the volume of maxillary and nasal sinus airways following suture palatine expansion with the Hyrax disyuntor appliance. Additionally, comparative analysis between preoperative and postoperative measures was performed using Student's t-test for statistical analysis. RESULTS: In 5 patients, paired t-tests found statistically significant differences before and after treatment in the volumes of the left maxillary sinus (p = 0.002), right maxillary sinus (p = 0.001), and nasal and maxillary sinus airway complex (p = 0.005) after suture palatine expansion with the Hyrax disyuntor appliance. CONCLUSION: The proposed digital technique is an accurate, repeatable, and reproducible measurement technique for analyzing the volume of maxillary and nasal sinus airways following suture palatine expansion using the Hyrax disyuntor.

High-resolution tracking of hyrax social interactions highlights nighttime drivers of animal sociality.

Network structure is a key driver of animal fitness, pathogen transmission, information spread, and population demographics in the wild. Although a considerable body of research applied network analysis to animal societies, only little effort has been devoted to separate daytime and nighttime sociality and explicitly test working hypotheses on social structures emerging at night. Here, we investigated the nighttime sociality of a wild population of rock hyraxes (Procavia capensis) and its relation to daytime social structure. We recorded nearly 15,000 encounters over 27 consecutive days and nights using proximity loggers. Overall, we show that hyraxes are more selective of their social affiliates at night compared to daytime. We also show that hyraxes maintain their overall network topology while reallocating the weights of social relationships at the daily and monthly scales, which could help hyraxes maintain their social structure over long periods while adapting to local constraints and generate complex social dynamics. These results suggest that complex network dynamics can be a by-product of simple daily social tactics and do not require high cognitive abilities. Our work sheds light on the function of nighttime social interactions in diurnal social species.

Effectiveness of insecticide thermal fogging in hyrax dens in the control of leishmaniasis vectors in rural Palestine: A prospective study.

BACKGROUND: Zoonotic cutaneous leishmaniasis (ZCL) is endemic in Palestine and transmitted by Phlebotomus sand flies. They inhabit dens of hyraxes, the reservoir animal. Control measures were implemented since 1996 but cases still occur. We estimated the effect of insecticide thermal fogging inside hyrax dens on sand fly density and leishmania infection. METHODOLOGY/PRINCIPAL FINDINGS: During July-September 2019, we conducted a 12-week controlled interrupted time series study in two control and one intervention sites containing three hyrax dens each. We implemented Permethrin thermal fogging in the intervention site at week 6. We measured weekly and 36hrs post-intervention sand fly abundance inside dens using CDC light traps. We performed Next-Generation Sequencing to identify sand fly Leishmania spp. infection. We calculated the abundance reduction (AR) using Mulla's formula and negative binomial regression. Among 11427 collected sand flies, 7339 (64%) were females and 1786 (16%) were Phlebotomus spp. comprising ten species; P. sergenti was the dominant (n = 773, 43%). We report P. arabicus (n = 6) for the first time in Palestine. After fogging, Phlebotomus spp. AR was 93% at 36hrs, 18% and 38% at two and five weeks respectively and 41% during the complete post-intervention period. In the regression models, Phlebotomus spp. density in the intervention site decreased by 74% (IRR: 0.26, 95%CI: 0.11-0.57) at two weeks, 34% (IRR: 0.66, 95%CI: 0.48-0.90) at five weeks and 74% (IRR: 0.26, 95%CI: 0.12-0.59) during the complete period. The density of Leishmania infected sand flies decreased by 65% (IRR: 0.35, 95%CI: 0.26-0.48) at five weeks and 82% (IRR: 0.18, 95%CI: 0.07-0.42) for the complete period (zero infections until week two). Leishmania infection prevalence in the intervention site was 14% pre-intervention and 3.9% post-intervention. CONCLUSIONS/SIGNIFICANCE: Fogging hyrax dens reduced sand fly abundance and leishmania infection during the 5-week post-intervention period and especially the first two weeks suggesting it could be an effective source-reduction measure for ZCL vectors. Future randomized controlled trials are needed to confirm the effectiveness of fogging hyrax dens on decreasing ZCL incidence.

DEVELOPMENTAL STAGES OF GRASSENEMA PROCAVIAE PETTER, 1959 (COSMOCERCOIDEA: ATRACTIDAE) FOUND IN THE STOMACH OF CAPE HYRAX (PROCAVIA CAPENSIS).

Morphological examination was made of the larval forms of Grassenema procaviae (Cosmocercoidea: Atractidae), an autoinfective and viviparous nematode parasite in the stomach of Cape hyrax (Procavia capensis). Three different larval stages (second-, third- and fourth-stages), and the adult stage were found among the worms collected at necropsy of 3 hosts, which were reared in a zoo in Japan. Molting phases between the larval stages and the final molt to the adult stage were also observed. It was considered that the gravid female delivers the second-stage larva, which develops to the adult stage through 3 molts. The cephalic structure was identical throughout the second to adult stages; all with transparent filaments extending from the mouth. Because starch grains were frequently found attached to the filaments and the worm intestinal lumen also contained starch grains ingested, the filaments were surmised to act as nutrient catchers.

Parcellation in the dorsal column nuclei of Florida manatees (Trichechus manatus latirostris) and rock hyraxes (Procavia capensis) indicates the presence of body barrelettes.

Florida manatees (Trichechus manatus latirostris) and rock hyraxes (Procavia capensis) exhibit expanded tactile arrays of vibrissae that are distributed not only on the face but also on the entire postfacial body. In contrast, the vibrissae of most mammals are principally restricted to the face. These facial vibrissae may be associated with central nervous system representations known as barrels in the cerebral cortex, barreloids in the thalamus, and barrelettes in the trigeminal nuclei of the brainstem. To date, vibrissae representations found within the brainstem have been principally limited to facial vibrissae representations in the trigeminal nuclei. We hypothesized that the tactile specializations of the manatee and rock hyrax would produce a unique modification of typical mammalian central nervous system organization, with postfacial vibrissae representations appearing in the cuneate and gracile nuclei as "body barrelettes." Using histological and histochemical methods, including cresyl violet, myelin, and cytochrome oxidase processing, we first delineated the rostral, middle, and caudal zones of the cuneate and gracile nuclei. Within the middle zone, divisions were present, including extensive parcellation in the cluster region, particularly in manatees. These clusters were particularly densely distributed and distinguishable in the presumptive postfacial body representations in the cuneate and gracile nuclei but otherwise shared many attributes with the barrelettes found in the trigeminal nuclei of other species. This study represents the first characterization of postfacial body vibrissae representations, or "body barrelettes," in the brainstem of any species. Previous studies have predominantly focused on facial vibrissae representations, which have served for decades as a model for sensory organization and plasticity. Our results extend what is known about vibrissae representations in the central nervous system to include expansions related to peripheral specializations of the postfacial body. Unusual somatosensory adaptations in the manatee and rock hyrax are highly informative regarding how mammalian brain organization responds to evolutionary pressures on sensory systems.

Habitat preferences, estimated abundance and behavior of tree hyrax (Dendrohyrax sp.) in fragmented montane forests of Taita Hills, Kenya.

We studied a previously almost unknown nocturnal mammal, an apparently undescribed species of tree hyrax (Dendrohyrax sp.) in the moist montane forests of Taita Hills, Kenya. We used thermal imaging to locate tree hyraxes, observe their behavior, and to identify woody plants most frequently visited by the selective browsers. We also documented acoustic behavior in forest fragments of different sizes. Data on calling type and frequency were analyzed together with lidar data to estimate population densities and to identify forest stand characteristics associated with large populations. Viable populations were found only in the largest forest fragments (> 90 ha), where tree hyraxes preferred most pristine forest stands with high, multilayered canopies. The estimated population sizes in smaller forest fragments were very limited, and hyraxes were heard to call only during late night and early morning hours, presumably in order to avoid detection. While we frequently recorded tree hyrax songs in the largest forest fragments, we almost never heard songs in the small ones. All remaining subpopulations of the Taita tree hyrax are under threat of human disturbance and further habitat deterioration. Conservation efforts should include protection of all remaining habitat patches, but also reforestation of former habitat is urgently needed.

Pulmonary silicosis in 2 rock hyraxes, and literature review.

Two rock hyraxes (Procavia capensis), from the Chattanooga Zoo, were submitted separately for autopsy at the University of Tennessee Veterinary Medical Center. The first was a 4-y-old intact female that died without premonitory signs and the second was a 10-y-old intact male that was euthanized because of severe renal disease. Microscopically, the lungs of both hyraxes had multifocal-to-coalescing, <1-mm diameter aggregates of epithelioid macrophages separated by streams of fibrous tissue. Macrophages contained intracytoplasmic, clear, acicular, birefringent crystals. Transmission electron microscopy and energy-dispersive x-ray spectroscopy findings on the lung samples were consistent with silica crystal deposition. The hyraxes had been housed together on commercially sourced play sand composed of 99-99.5% quartz, a crystalline silica polymorph. The microscopic findings, transmission electron microscopy, and energy-dispersive x-ray spectroscopy of the intrahistiocytic crystals, in addition to the history of exposure to crystalline silica, were consistent with pulmonary silicosis. Pulmonary silicosis has not been reported previously in rock hyraxes, to our knowledge.

Dentoskeletal changes due to rapid maxillary expansion in growing patients with tooth-borne and tooth-bone-borne expanders: A randomized clinical trial.

OBJECTIVES: To compare, using cone-beam computed tomography, the dentoskeletal changes in rapid maxillary expansion with tooth-bone-borne (Hybrid Hyrax) and tooth-borne (Hyrax) appliances. SETTING AND SAMPLE POPULATION: Forty-two patients who met the eligibility criteria (aged 11-14 years; transverse maxillary deficiency, posterior crossbite, and presence of upper first premolars and molars) were screened and allocated into two groups: HHG (treatment with Hybrid Hyrax) and HG (treatment with Hyrax). MAIN OUTCOME MEASURES: The primary outcomes included nasomaxillary dimensional changes. CBCT was performed before and 3 months after the activation phase. Measurements were performed using Dolphin® . Baseline data were compared using one-way ANOVA. For intergroup comparison, ANCOVA was used to analyze the initial age, appliance activations (mm), and mid-palatal suture maturation data as covariates. Statistical significance was set at 5%. RESULTS: The premolar region in HHG showed increased skeletal changes than in HG, with the difference being 1.5 mm (0.5; 2.6) in the nasal cavity (P = .004), 1.4 mm (0.3; 2.5) in the nasal floor (P = .019), and 1.1 mm (0.2; 2.1) in the maxilla (P = .022). The molar region in HHG showed increased skeletal changes with the difference being 0.9 mm (0.2; 1.5) in the nasal cavity (P = .005), and 0.9 mm (0; 1.8) in the maxilla (P = .042) than in HG. Premolar inclination was higher in HG. CONCLUSION: Hybrid Hyrax showed more skeletal changes and fewer dental side effects, especially in the first premolar region. The amount of activation influenced the higher nasal skeletal changes in the Hybrid hyrax group.

HYDROMETRA IN ROCK HYRAX (PROCAVIA CAPENSIS) UNDER MANAGED CARE.

In zoos, rock hyrax (Procavia capensis) are commonly maintained in groups and population control is necessary. Here we report on hydrometra prevalence in a group of rock hyraxes. Prevalence of hydrometra in this small group (4/8) far exceeds reproductive pathology prevalence previously reported for this species under managed care. Affected females were nulliparous, but had not been contracepted; instead they were maintained as a single-sex group. The first case presented as sudden death and three additional cases were diagnosed antemortem via ultrasound. Two of these underwent ovariohysterectomy to treat the severe hydrometra. The last case was a mild hydrometra and during follow-up exam was found to have spontaneously resolved. Detailed information regarding clinical presentation, diagnostics and surgical techniques are provided.

Evaluation of self-perceived pain and jaw function impairment in children undergoing slow and rapid maxillary expansion.

OBJECTIVES: To evaluate and compare perceived pain and jaw function impairment during the first 4 weeks with slow maxillary expansion (SME) using quadhelix and rapid maxillary expansion (RME) using conventional banded hyrax. MATERIALS AND METHODS: Sixty patients aged 10.2 to 15 years were enrolled and consecutively recruited to either the quadhelix group (QG) or hyrax group (HG). A questionnaire was used to evaluate pain, jaw function impairment, and analgesic consumption in the first 7 days, at 2 weeks, and at 4 weeks. RESULTS: Fifty-five patients (43 girls and 12 boys) completed the questionnaire at all time points (27 in the QG and 28 in the HG). Except at 4 hours, there were no significant differences between the groups regarding pain from teeth, tongue, and palate. Patients started to adapt after day 3. Patients in the HG group reported significantly higher scores for difficulty in swallowing (moderate to severe) during the first 6 days. In both groups, minimal effects were found on speech and the majority of patients did not experience difficulty in yawning or laughing. There was no significant difference in analgesic consumption between the groups. No correlations were found between age, gender, or malocclusion type and any of the investigated outcomes. CONCLUSIONS: Quadhelix for SME and conventional banded hyrax for RME were well tolerated by patients after 1 week. The decision to use either appliance could be based on factors not related to patient experiences.

Morphological observation and first molecular characterization of Grassenema procaviae Petter, 1959 (Cosmocercoidea: Atractidae) in the stomach of Cape hyrax (Procavia capensis) raised in a zoo in Japan.

The superfamily Cosmocercoidea comprises three families: Cosmocericidae, Kathlaniidae and Atractidae. Information on the nucleotide sequences of the Cosmocercoidea is quite limited, and the molecular classification of the whole superfamily has been slow to progress. The genus Grassenema of the family Atractidae is a parasitic nematode group that occurs in the digestive tract of hyraxes and includes three species: Grassenema procaviae, G. dendrohyraci, and G. hyracis. The type species of the genus, G. procaviae, was isolated from the digestive tract of Cape hyraxes (Procavia capensis) and has the potential to cause gastric ulcers. Although G. procaviae is a common parasite of Cape hyraxes, no genetic information for the parasite is currently available. In this study, we obtained the first genomic sequences of G. procaviae and performed detailed morphological observations. Furthermore, molecular phylogenetic analysis was performed, and the taxonomic position of the parasite was evaluated using 18S and 28S rDNA sequences. Those data will be useful for molecular identification of G. procaviae and future phylogenetic analysis within the Atractidae.