An origami paper-based analytical device for DNA damage analysis.

Detection and characterization of DNA damage plays a critical role in genotoxicity testing, drug screening, and environmental health. We developed a fully integrated origami paper-based analytical device (oPAD) for measuring DNA damage. This simple device allows on-paper cell lysis, DNA extraction, terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) reaction and signal readout with simple operation steps, enabling rapid (within 30 min) and high throughput assessment of multiple DNA damages induced by exogenous chemical agents.

A versatile fluorometric in situ hybridization method for the quantitation of hairpin conformations in DNA self-assembled monolayers.

As the performance of hairpin DNA (hpDNA)-based biosensors is highly dependent on the yield of stem-loop (hairpin) conformations, we report herein a versatile fluorometric in situ hybridization protocol for examining hpDNA self-assembled monolayers (SAMs) on popularly used biochip substrates. Specifically, the ratio of fluorescence (FL) intensities of hpDNA SAMs (in an array format) before and after hybridization was adopted as the key parameter for performing such a determination. Upon confirming the existence of mixed and tunable DNA conformations in binary deposition solutions and efficient hybridization of the hairpin strands with the target DNA via gel electrophoresis assays, we tested the fluorometric protocol for determining the coverages of hpDNA in hpDNA/ssDNA SAMs prepared on gold; its accuracy was validated by Exonuclease I (Exo I)-assisted electrochemical quantitation. To further confirm its versatility, this FL protocol was adopted for quantifying hairpin conformations formed on glass and polycarbonate (PC) substrates. The molar ratios of surface-tethered hairpin conformations on the three different substrates were all found to be proportional to but less than those in the binary deposition solutions, and were dependent on the substrate morphology. The findings reported herein are beneficial for the construction of highly efficient DNA hairpin-based sensing surfaces, which essentially facilitates the creation of hpDNA-based biosensors with optimal detection performance.

Origins and clonal convergence of gastrointestinal IgE+ B cells in human peanut allergy.

B cells in human food allergy have been studied predominantly in the blood. Little is known about IgE+ B cells or plasma cells in tissues exposed to dietary antigens. We characterized IgE+ clones in blood, stomach, duodenum, and esophagus of 19 peanut-allergic patients, using high-throughput DNA sequencing. IgE+ cells in allergic patients are enriched in stomach and duodenum, and have a plasma cell phenotype. Clonally related IgE+ and non-IgE-expressing cell frequencies in tissues suggest local isotype switching, including transitions between IgA and IgE isotypes. Highly similar antibody sequences specific for peanut allergen Ara h 2 are shared between patients, indicating that common immunoglobulin genetic rearrangements may contribute to pathogenesis. These data define the gastrointestinal tract as a reservoir of IgE+ B lineage cells in food allergy.

Electrochemical DNA Sensor Based on Carbon Black-Poly(Neutral Red) Composite for Detection of Oxidative DNA Damage.

Voltammetric DNA sensor has been proposed on the platform of glassy carbon electrode covered with carbon black with adsorbed pillar[5]arene molecules. Electropolymerization of Neutral Red performed in the presence of native or oxidatively damaged DNA resulted in formation of hybrid material which activity depended on the DNA conditions. The assembling of the surface layer was confirmed by scanning electron microscopy and electrochemical impedance spectroscopy. The influence of DNA and pillar[5]arene on redox activity of polymeric dye was investigated and a significant increase of the peak currents was found for DNA damaged by reactive oxygen species generated by Cu2+/H2O2 mixture. Pillar[5]arene improves the electron exchange conditions and increases the response and its reproducibility. The applicability of the DNA sensor developed was shown on the example of ascorbic acid as antioxidant. It decreases the current in the concentration range from 1.0 µM to 1.0 mM. The possibility to detect antioxidant activity was qualitatively confirmed by testing tera infusion. The DNA sensor developed can find application in testing of carcinogenic species and searching for new antitumor drugs.

Identification of Individual Immobilized DNA Molecules by Their Hybridization Kinetics Using Single-Molecule Fluorescence Imaging.

Single-molecule fluorescence methods can count molecules without calibration, measure kinetics at equilibrium, and observe rare events that cannot be detected in an ensemble measurement. We employ total internal reflection fluorescence microscopy to monitor hybridization kinetics between individual spatially resolved target DNA molecules immobilized at a glass interface and fluorescently labeled complementary probe DNA in free solution. Using super-resolution imaging, immobilized target DNA molecules are located with 36 nm precision, and their individual duplex formation and dissociation kinetics with labeled DNA probe strands are measured at site densities much greater than the diffraction limit. The purpose of this study is to evaluate uncertainties in identifying these individual target molecules based on their duplex dissociation kinetics, which can be used to distinguish target molecule sequences randomly immobilized in mixed-target samples. Hybridization kinetics of individual target molecules are determined from maximum likelihood estimation of their dissociation times determined from a sample of hybridization events at each target molecule. The dissociation time distributions thus estimated are sufficiently narrow to allow kinetic discrimination of different target sequences. For example, a single-base thymine-to-guanine substitution on immobilized strands produces a 2.5-fold difference in dissociation rates of complementary probes, allowing for the identification of individual target DNA molecules by their dissociation rates with 95% accuracy. This methodology represents a step toward high-density single-molecule DNA microarray sensors and a powerful tool to investigate the kinetics of hybridization at surfaces at the molecular level, providing information that cannot be acquired in ensemble measurements.

Single Nanotube Spectral Imaging To Determine Molar Concentrations of Isolated Carbon Nanotube Species.

Electronic and biological applications of carbon nanotubes can be highly dependent on the species (chirality) of nanotube, purity, and concentration. Existing bulk methods, such as absorbance spectroscopy, can quantify sp2 carbon based on spectral bands, but nanotube length distribution, defects, and carbonaceous impurities can complicate quantification of individual particles. We present a general method to relate the optical density of a photoluminescent nanotube sample to the number of individual nanotubes. By acquiring 3-dimensional images of nanotubes embedded in a gel matrix with a reducing environment, we quantified all emissive nanotubes in a volume. Via spectral imaging, we assessed structural impurities and precisely determined molar concentrations of the (8,6) and (9,4) nanotube species. We developed an approach to obtain the molarity of any structurally enriched semiconducting single-walled carbon nanotube preparation on a per-nanotube basis.

A Broadly Applicable Assay for Rapidly and Accurately Quantifying DNA Surface Coverage on Diverse Particles.

DNA-modified particles are used extensively for applications in sensing, material science, and molecular biology. The performance of such DNA-modified particles is greatly dependent on the degree of surface coverage, but existing methods for quantitation can only be employed for certain particle compositions and/or conjugation chemistries. We have developed a simple and broadly applicable exonuclease III (Exo III) digestion assay based on the cleavage of phosphodiester bonds-a universal feature of DNA-modified particles-to accurately quantify DNA probe surface coverage on diverse, commonly used particles of different compositions, conjugation chemistries, and sizes. Our assay utilizes particle-conjugated, fluorophore-labeled probes that incorporate two abasic sites; these probes are hybridized to a complementary DNA (cDNA) strand, and quantitation is achieved via cleavage and digestion of surface-bound probe DNA via Exo III's apurinic endonucleolytic and exonucleolytic activities. The presence of the two abasic sites in the probe greatly speeds up the enzymatic reaction without altering the packing density of the probes on the particles. Probe digestion releases a signal-generating fluorophore and liberates the intact cDNA strand to start a new cycle of hybridization and digestion, until all fluorophore tags have been released. Since the molar ratio of fluorophore to immobilized DNA is 1:1, DNA surface coverage can be determined accurately based on the complete release of fluorophores. Our method delivers accurate, rapid, and reproducible quantitation of thiolated DNA on the surface of gold nanoparticles, and also performs equally well with other conjugation chemistries, substrates, and particle sizes, and thus offers a broadly useful assay for quantitation of DNA surface coverage.

Decoding of quantum dots encoded microbeads using a hyperspectral fluorescence imaging method.

We presented a decoding method of quantum dots encoded microbeads with its fluorescence spectra using line scan hyperspectral fluorescence imaging (HFI) method. A HFI method was developed to attain both the spectra of fluorescence signal and the spatial information of the encoded microbeads. A decoding scheme was adopted to decode the spectra of multicolor microbeads acquired by the HFI system. Comparison experiments between the HFI system and the flow cytometer were conducted. The results showed that the HFI system has higher spectrum resolution; thus, more channels in spectral dimension can be used. The HFI system detection and decoding experiment with the single-stranded DNA (ssDNA) immobilized multicolor beads was done, and the result showed the efficiency of the HFI system. Surface modification of the microbeads by use of the polydopamine was characterized by the scanning electron microscopy and ssDNA immobilization was characterized by the laser confocal microscope. These results indicate that the designed HFI system can be applied to practical biological and medical applications.

Nanoscale characterization of DNA conformation using dual-color fluorescence axial localization and label-free biosensing.

Quantitative determination of the density and conformation of DNA molecules tethered to the surface can help optimize and understand DNA nanosensors and nanodevices, which use conformational or motional changes of surface-immobilized DNA for detection or actuation. We present an interferometric sensing platform that combines (i) dual-color fluorescence spectroscopy for precise axial co-localization of two fluorophores attached at different nucleotides of surface-immobilized DNA molecules and (ii) independent label-free quantification of biomolecule surface density at the same site. Using this platform, we examined the conformation of DNA molecules immobilized on a three-dimensional polymeric surface and demonstrated simultaneous detection of DNA conformational change and binding in real-time. These results demonstrate that independent quantification of both surface density and molecular nanoscale conformation constitutes a versatile approach for nanoscale solid-biochemical interface investigations and molecular binding assays.

Advances in DNA-directed immobilization.

DNA-directed immobilization (DDI) of proteins is a chemically mild and highly efficient method for generating (micro)structured patterns of proteins on surfaces. Twenty years after its initial description, the DDI method has proven its robustness and versatility in numerous applications, ranging from biosensing and biomedical diagnostics, to fundamental studies in biology and medicine on the single-cell level. This review gives a brief summary on technical aspects of the DDI method and illustrates its scope for applications with an emphasis on studies in cell biology.

Single-molecule characterization of Fen1 and Fen1/PCNA complexes acting on flap substrates.

Flap endonuclease 1 (Fen1) is a highly conserved structure-specific nuclease that catalyses a specific incision to remove 5' flaps in double-stranded DNA substrates. Fen1 plays an essential role in key cellular processes, such as DNA replication and repair, and mutations that compromise Fen1 expression levels or activity have severe health implications in humans. The nuclease activity of Fen1 and other FEN family members can be stimulated by processivity clamps such as proliferating cell nuclear antigen (PCNA); however, the exact mechanism of PCNA activation is currently unknown. Here, we have used a combination of ensemble and single-molecule Förster resonance energy transfer together with protein-induced fluorescence enhancement to uncouple and investigate the substrate recognition and catalytic steps of Fen1 and Fen1/PCNA complexes. We propose a model in which upon Fen1 binding, a highly dynamic substrate is bent and locked into an open flap conformation where specific Fen1/DNA interactions can be established. PCNA enhances Fen1 recognition of the DNA substrate by further promoting the open flap conformation in a step that may involve facilitated threading of the 5' ssDNA flap. Merging our data with existing crystallographic and molecular dynamics simulations we provide a solution-based model for the Fen1/PCNA/DNA ternary complex.

Mapping of surface-immobilized DNA with force-based atomic force microscopy.

Single-stranded 50-mer, 100-mer, and 150-mer DNAs were immobilized on a surface, and force-based atomic force microscopy (AFM) was employed to examine their behavior. A complementary 20-mer probe DNA on an AFM tip was used for the measurements. High-resolution maps were generated, and relevant parameters, including the force, stretching distance, unbinding probability, cluster size, and degree of distortion, were analyzed. Due to thermal drift, the cluster shape became increasingly distorted as the scan speed was decreased and as the map area was reduced. The cluster radius increased with the number of base (N), and the radius was proportional to N(0.6) (r = 0.977) and N(0.53) (r = 0.991). Due to the effect of the pulling angle, the apparent values of the stretching distance and the unbinding force decreased as the AFM probe was moved away from the center position; these values can be described as a function of sin θ.

[Gel immobilization of human genome].

OBJECTIVE: To develop a solid phase PCR method by covalent single point immobilization for recycle utilization of human genome. METHODS: Polymethacrylamide gel was selected as a solid PCR carrier based on DNA-hydrogel copolymer chemistry presented by Mirzabekov. (CH2)6NH2 amino-modified PCR product and randomly fractured formic acid-modified plasmid pGEM-T-HLA-G were used as templates. The specificity of the attachment chemistry was characterized by acrylamide gel electrophoresis, and the thermal stability of method was demonstrated by PCR. This method was applied for the recycle utilization of human genome. Sequencing was used to exclude the possibility of introduced mutations during modification and immobilization procedures. RESULTS: The PCR detections of plasmid DNA and human genome DNA immobilized by polymethacrylamide gel was successful. The thermal stability of method was successfully demonstrated by performing PCR after 16 rounds of standard 36 PCR cycles. And the sequencing was found no mutation. CONCLUSION: The DNA immobilization method with polymethacrylamide gel as a solid phase carrier is stable and specific, which can be a possible approach for realizing recycle utilization of human genome for whole-genome sequencing and SNP detection.

Efficient self-assembly of DNA-functionalized fluorophores and gold nanoparticles with DNA functionalized silicon surfaces: the effect of oligomer spacers.

Although strategies for the immobilization of DNA oligonucleotides onto surfaces for bioanalytical and top-down bio-inspired nanobiofabrication approaches are well developed, the effect of introducing spacer molecules between the surface and the DNA oligonucleotide for the hybridization of nanoparticle-DNA conjugates has not been previously assessed in a quantitative manner. The hybridization efficiency of DNA oligonucleotides end-labelled with gold nanoparticles (1.4 or 10 nm diameter) with DNA sequences conjugated to silicon surfaces via hexaethylene glycol phosphate diester oligomer spacers (0, 1, 2, 6 oligomers) was found to be independent of spacer length. To quantify both the density of DNA strands attached to the surfaces and hybridization with the surface-attached DNA, new methodologies have been developed. Firstly, a simple approach based on fluorescence has been developed for determination of the immobilization density of DNA oligonucleotides. Secondly, an approach using mass spectrometry has been created to establish (i) the mean number of DNA oligonucleotides attached to the gold nanoparticles and (ii) the hybridization density of nanoparticle-oligonucleotide conjugates with the silicon surface-attached complementary sequence. These methods and results will be useful for application with nanosensors, the self-assembly of nanoelectronic devices and the attachment of nanoparticles to biomolecules for single-molecule biophysical studies.