A simple "signal off-on" fluorescence nanoplatform for the label-free quantification of exosome-derived microRNA-21 in lung cancer plasma.

A simple nanoplatform based on molybdenum disulfide (MoS2) nanosheets, a fluorescence quencher (signal off), and a hybridization chain reaction (HCR) signal amplification (signal on) used for the enzyme-free, label-free, and low-background signal quantification of microRNA-21 in plasma exosome is reported. According to the sequence of microRNA-21, carboxy-fluorescein (FAM)-labeled hybridization probe 1 (FAM-H1) and hybridization probes 2 (FAM-H2) were designed with excitation maxima at 488 nm and emission maxima at 518 nm. MoS2 nanosheets could adsorb FAM-H1 and FAM-H2 and quenched their fluorescence signals to reduce the background signal. However, HCR was triggered when microRNA-21 was present. Consequently, HCR products containing a large number of FAM fluorophores can emit a strong fluorescence at 518 nm and could realize the detection of microRNA-21 as low as 6 pmol/L and had a wide linear relation of 0.01-25 nmol/L. This assay has the ability of single-base mismatch recognition and could identify microRNA-21 with high specificity. Most importantly, this approach was successfully applied to the detection of plasma exosomal microRNA-21 in patients with lung cancer, and it is proposed that other targets can also be detected by changing the FAM-H1 and FAM-H2 corresponding to the target sequence. Thus, a novel, hands-on strategy for liquid biopsy was proposed and has a potential application value in the early diagnosis of lung cancer.

Carbon nanodot-based electrogenerated chemiluminescence biosensor for miRNA-21 detection.

A simple carbon nanodot-based electrogenerated chemiluminescence biosensor is described for sensitive and selective detection of microRNA-21 (miRNA-21), a biomarker of several pathologies including cardiovascular diseases (CVDs). The photoluminescent carbon nanodots (CNDs) were obtained using a new synthesis method, simply by treating tiger nut milk in a microwave reactor. The synthesis is environmentally friendly, simple, and efficient. The optical properties and morphological characteristics of the CNDs were exhaustively investigated, confirming that they have oxygen and nitrogen functional groups on their surfaces and exhibit excitation-dependent fluorescence emission, as well as photostability. They act as co-reactant agents in the anodic electrochemiluminescence (ECL) of [Ru(bpy)3]2+, producing different signals for the probe (single-stranded DNA) and the hybridized target (double-stranded DNA). These results paved the way for the development of a sensitive ECL biosensor for the detection of miRNA-21. This was developed by immobilization of a thiolated oligonucleotide, fully complementary to the miRNA-21 sequence, on the disposable gold electrode. The target miRNA-21 was hybridized with the probe on the electrode surface, and the hybridization was detected by the enhancement of the [Ru(bpy)3]2+/DNA ECL signal using CNDs. The biosensor shows a linear response to miRNA-21 concentration up to 100.0 pM with a detection limit of 0.721 fM. The method does not require complex labeling steps, and has a rapid response. It was successfully used to detect miRNA-21 directly in serum samples from heart failure patients without previous RNA extraction neither amplification process.

Amplified plasmonic and microfluidic setup for DNA monitoring.

Plasmonic nanosensors for label-free detection of DNA require excellent sensing resolution, which is crucial when monitoring short DNA sequences, as these induce tiny peak shifts, compared to large biomolecules. We report a versatile and simple strategy for plasmonic sensor signal enhancement by assembling multiple (four) plasmonic sensors in series. This approach provided a fourfold signal enhancement, increased signal-to-noise ratio, and improved sensitivity for DNA detection. The response of multiple sensors based on AuNSpheres was also compared with  AuNRods, the latter showing better sensing resolution. The amplification system based on AuNR was integrated into  a microfluidic sequential injection platform and applied to the monitoring of DNA, specifically from environmental invasive species-zebra mussels. DNA from zebra mussels was log concentration-dependent from 1 to 1 × 106 pM, reaching a detection limit of 2.0 pM. In situ tests were also successfully applied to real samples, within less than 45 min, using DNA extracted from zebra mussel meat. The plasmonic nanosensors' signal can be used as a binary output (yes/no) to assess the presence of those invasive species. Even though these genosensors were applied to the monitoring of DNA in environmental samples, they potentially offer advantage in a wide range of fields, such as disease diagnostics.

Ratiometric Fluorescence Imaging of Intracellular MicroRNA with NIR-Assisted Signal Amplification by a Ru-SiO2@Polydopamine Nanoplatform.

Accurate and sensitive fluorescence imaging of intracellular miRNA is essential for understanding the mechanism underlying some physiological and pathological events, as well as the prevention and diagnosis of diseases. Herein, a highly sensitive ratiometric fluorescent nanoprobe for intracellular miRNA imaging was fabricated by integrating a Ru-SiO2@polydopamine (Ru-SiO2@PDA) nanoplatform with a near-infrared light (NIR)-assisted DNA strand displacement signal amplification strategy. The Ru-SiO2@PDA spheres have excellent biosafety, high photothermal effect, and unique photophysical properties that can both emit a stable red fluorescence and well quench the fluorophores getting closer to them. So, when the fuel DNA and carboxyfluorescein (FAM)-labeled signal DNA are co-assembled on their outer surfaces, the FAM's green fluorescence is quenched, and a low ratiometric signal is obtained. However, in the presence of miRNA, the target displaces the signal DNA from the capture DNA, releasing the signal DNA far away from the Ru-SiO2@PDA. Then, the green fluorescence recovers and leads to an enhanced Igreen/Ired value. Under NIR light irradiation, the Ru-SiO2@PDA increases the local temperature around the probe and triggers the release of fuel DNA, which thus recycles the target miRNA and effectively amplifies the ratiometric signal. Using A549 cells as a model, the nanoprobe realizes the highly sensitive ratiometric fluorescence imaging of miRNA let-7a, as well as its in vivo up- and down-regulation expressions. It provides a facile tool for highly sensitive and accurate intracellular miRNA detection through one-step incubation and may pave a new avenue for single-cell analysis.

Graphene-based fluorometric determination of agrD gene transcription in methicillin-resistant Staphylococcus aureus using exonuclease III-aided target recycling and DNA walker cascade amplification.

A graphene-based bioassay is described for the fluorometric determination of agrD gene transcription (mRNA) in methicillin-resistant Staphylococcus aureus (MRSA). This method includes exonuclease III (Exo III)-assisted target recycling and DNA walker cascade amplification. Hairpin1 (HP1) consists of a capture probe (CP) and DNA walker sequence. In the absence of the target, 5'-amino modified hairpin2 (HP2) labeled with carboxyfluorescein (FAM) at its 3' terminus is covalently linked to graphene via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide and N-hydroxysuccinimide (EDC/NHS) catalysis, resulting in the quenching of the FAM signal. The stem-loop structure of HP1 opens when the target is added to form partially complementary DNA/RNA hybrids. Exo III then initiates the target recycling process by cleaving the CP and DNA walker cascade reaction by automatic walking. This iterative reaction causes the FAM to dissociate from the graphene, and the fluorescence can be measured at excitation/emission wavelengths of 480/514 nm. Therefore, the target can be assayed by fluorescence. This method has a linear relationship with the concentration of target within the range 1 fM to 100 pM with a detection limit of 1 fM. The developed bioassay was used to monitor biofilm formation and investigate the mechanism of drug action with satisfactory results. Schematic representation of the graphene-based fluorescent bioassay for agrD gene transcription in methicillin-resistant Staphylococcus aureus by using exonuclease III-aided target recycling and DNA walker cascade amplification.

Hexagonal boron nitride nanosheet as an effective nanoquencher for the fluorescence detection of microRNA.

Two-dimensional (2D) hexagonal boron nitride nanosheet (h-BNNS) is proposed as an effective nanoquencher for fluorescence detection of biocompatible microRNA. Compared with bulk hexagonal boron nitride (h-BN), the exfoliated ultrathin nanosheet has a narrow band gap and increased conductivity, thus enabling fast electron transfer with this electron acceptor for more effective fluorescence detection of microRNA. Remarkably, using the nanoprobe consisting of h-BNNS and FAM dye-labeled ssDNA, a low detection limit of 2.39 nM is achieved and a rapid fluorescence response is observed compared with previously reported fluorescence sensing materials. More importantly, this sensing system could also distinguish base-mismatched microRNA, suggesting that the proposed sensing platform held excellent selectivity and great promise for application in the detection of nucleotide polymorphism. This work will benefit microRNA-related fundamental research and disease diagnosis.

Acceleration of DNA Hybridization Chain Reactions on 3D Nanointerfaces of Magnetic Particles and Their Direct Application in the Enzyme-Free Amplified Detection of microRNA.

Accelerated DNA hybridization chain reactions (HCRs) using DNA origami as a scaffold have received considerable attention in dynamic DNA nanotechnology. However, tailor-made designs are essential for DNA origami scaffolds, hampering the practical application of accelerated HCRs. Here, we constructed the semilocalized HCR and localized HCR systems using magnetic beads (MBs) as a simple scaffold to explore them for the enzyme-free miR-21 detection. The semilocalized HCR system relied on free diffusing one hairpin DNA and MBs immobilized with another hairpin DNA, and the localized HCR system relied on MBs coimmobilized with two hairpin DNAs. We demonstrated that the DNA density on MBs plays a critical role in HCR kinetics and limit of detection (LOD). Among semilocalized HCR systems, MBs with a medium DNA density showed a faster HCR and lower LOD (10 pM) than the diffusive (conventional) HCR system (LOD: 86 pM). In contrast, the HCR further accelerated for the localized HCR systems as the DNA density increased. The localized HCR system with the highest DNA density showed the fastest HCR and the lowest LOD (533 fM). These findings are of great importance for the rational design of accelerated HCRs using simple scaffolds for practical applications.

A One-Two-Three Multifunctional System for Enhanced Imaging and Detection of Intracellular MicroRNA and Chemogene Therapy.

Simultaneous imaging, diagnosis, and therapy can offer an effective strategy for cancer treatment. However, the complex probe design, poor drug release efficiency, and multidrug resistance remain tremendous challenges to cancer treatment. Here, a novel one-two-three system is built for enhanced imaging and detection of miRNA-21 (miR-21) overexpressed in cancer cell and chemogene therapy. The system consists of dual-mode DNA robot nanoprobes assembled by two types of hairpin DNAs and three-way branch DNAs modified on gold nanoparticles, with intercalating anticancer drugs (doxorubicin), into DNA duplex GC base pairs. In the system, via intracellular ATP-accelerated cyclic reaction triggered by miR-21, fluorescence and SERS signals were alternated with DNA structure switch, and the precise SERS detection of miRNA and fluorescence imaging oriented "on-demand" release of two types of anticancer drugs (anti-miR-21 and Dox) are achieved. Thus, "one-two-three" means one kind of miR-21-triggered endogenous substance accelerated cyclic reaction, two modes of signal switch, and three functions including enhanced imaging, detection, and comprehensive treatment. The one-two-three system has some notable merits. First, ATP as an endogenous substance promotes DNA structure switching and accelerates the cyclic reaction. Second, the treatment with a dual-mode signal switch is more reliable and accurate and can provide more abundant information than a single-mode treatment platform. Thus, the imaging and detection of intracellular miRNA and effective comprehensive therapy are realized. In vivo results indicate that the system can provide new insights and strategies for diagnosis and therapy.

Electrochemiluminescence from a biocatalysis accelerated N-(aminobutyl)-N-(ethylisoluminol)/dissolved O2 system for microRNA detection.

A kind of biocatalyst, laccase, has been employed as a biocompatible coreactant accelerator to efficiently catalyze coreactant (dissolved O2) for generating high local concentration of superoxide radical (O2•-), acquiring high-intense electrochemiluminescence (ECL) emission of ABEI (N-(aminobutyl)-N-(ethylisoluminol))/dissolved O2 system. Furthermore, a modified strand displacement reaction with excellent amplification efficiency was constructed by replacing traditional single strand DNA to the hairpin DNA as template for triggering the immobilization of more signal probes. As a result, the biosensor for microRNA-21 determination has preeminent selectivity and favorable sensitivity with detection limit down to 80.8 aM. Significantly, the devised strategy has blazed a new path for seeking more coreaction accelerators with splendid biocompatibility thus promoting the application of ternary ECL systems in biological analysis and clinical diagnosis.

Dual-potential electrochemiluminescence of single luminophore for detection of biomarker based on black phosphorus quantum dots as co-reactant.

Simultaneous cathodic and anodic electrochemiluminescence (ECL) emissions of needle-like nanostructures of Ru(bpy)32+ (RuNDs) as the only luminophore are reported based on different co-reactants. Cathodic ECL was attained from RuNDs/K2S2O8 system, while anodic ECL was achieved from RuNDs/black phosphorus quantum dots (BPQDs) system. Ferrocene attached to the hairpin DNA could quench the cathodic and anodic ECL simultaneously. Subsequently, the ECL signals recovered in the presence of tumor marker mucin 1 (MUC1), which made it possible to quantitatively detect MUC1. The variation of ECL signal was related linearly to the concentrations of MUC1 in the range 20 pg mL-1 to 10 ng mL-1, and the detection limits were calculated to 2.5 pg mL-1 (anodic system, 3σ) and 6.2 pg mL-1 (cathodic system, 3σ), respectively. The recoveries were 97.0%, 105%, and 95.2% obtained from three human serum samples, and the relative standard deviation (RSD) is 5.3%. As a proof of concept, this work realized simultaneous ECL emission of  a single luminophore, which initiates a new thought in biomarker ECL detection beyond the traditional ones. Simultaneous cathodic and anodic ECL emissions of RuNDs were reported based on different co-reactants. Ferrocene could quench the ECL emission in the cathode and the anode simultaneously. Thus, an aptasensor was constructed based on the variation of ECL intensity. As a proof of concept, this work realized simultaneous ECL emission of a single luminophore, which initiates a new thought in biomarker ECL detection beyond the traditional ones by avoiding the false positive signals.

Gold nanorods-based lateral flow biosensors for sensitive detection of nucleic acids.

A gold nanorod (AuNR)-based lateral flow nucleic acid biosensor (LFNAB) is reported for visual detection of DNA with a short test time and high sensitivity. AuNRs with an approximate length of 60 nm were utilized as a colored tag to label the detection DNA probe (Det-DNA). The capture DNA probe (Cap-DNA) was immobilized on the test region of LFNAB. Sandwich-type complex was formed among the AuNR-Det-DNA, target DNA (Tar-DNA), and Cap-DNA on the LFNAB by Watson-Crick base pairing. In the presence of Tar-DNA, AuNRs were thus seized on the test region of LFNAB, and the accumulation of AuNRs subsequently produced a characteristic colored band. The optimized LFNAB was able to detect 10 pM Tar-DNA without instrumentation. Quantitative analysis could be established by measuring the intensity of test band using a portable strip reader, and the detection limit of 2 pM target DNA was achieved on the LFNAB without signal amplification. The detection limit of the AuNR-based LFNAB is 250-fold lower than that of gold nanoparticle (AuNP)-based LFNABs. This work unveiled a sensitive, rapid, and economical strategy for the detection of nucleic acids, and simultaneously opening new promising routes for disease diagnosis and clinical applications. Gold nanorods are used as colored tags for lateral flow nucleic acid biosensor.

Combination of ferrocene decorated gold nanoparticles and engineered primers for the direct reagentless determination of isothermally amplified DNA.

A reagent-less DNA sensor has been developed exploiting a combination of gold nanoparticles, modified primers, and isothermal amplification. It is applied to the determination ofKarlodinium armiger, a toxic microalgae, as a model analyte to demonstrate this generic platform. Colloidal gold nanoparticles with an average diameter of 14 ± 0.87 nm were modified with a mixed self-assembled monolayer of thiolated 33-mer DNA probes and (6-mercaptohexyl) ferrocene. Modified primers, exploiting a C3 spacer between the primer-binding site and an engineered single-stranded tail, were used in an isothermal recombinase polymerase amplification reaction to produce an amplicon by two single-stranded tails. These tails were designed to be complementary to a gold electrode tethered capture oligo probe, and an oligo probe immobilized on the gold nanoparticles, respectively. The time required for hybridization of the target tailed DNA with the surface immobilized probe and reporter probe immobilized on AuNPs was optimized and reduced to 10 min, in both cases. Amplification time was further optimized to be 40 min to ensure the maximum signal. Under optimal conditions, the limit of detection was found to be 1.6 fM of target dsDNA. Finally, the developed biosensor was successfully applied to the detection of genomic DNA extracted from a seawater sample that had been spiked with K. armiger cells. The demonstrated generic electrochemical genosensor can be exploited for the detection of any DNA sequence and ongoing work is moving towards an integrated system for use at the point-of-need.

A sensitive electrochemiluminescence DNA biosensor based on the signal amplification of ExoIII enzyme-assisted hybridization chain reaction combined with nanoparticle-loaded multiple probes.

An electrochemiluminescence (ECL) DNA biosensor based on ExoIII exonuclease assistance and hybridization chain reaction (HCR) amplification technology has been constructed. ExoIII exonuclease and triple-helix DNA molecular switch are used in detecting a target in circulation. By combining HCR with AuNPs@DNA, a novel signal probe is built, which enables multiple signal amplification and the high-sensitive detection of transgenic rice BT63 DNA. The Fe3O4@Au solution is added to a magneto-controlled glassy carbon electrode, and sulfhydryl-modified capture DNA (CP) is immobilized on Fe3O4@Au through the Au-S bond. Mercaptoethanol is added to close sites and prevent the nonspecific adsorption of CP on the magnetron glassy carbon electrode. A target DNA is added to a constructed triple-helix DNA molecular centrifuge tube for reaction. Owing to base complementation and the reversible switching of the triple-helix DNA molecular state, the target DNA turns on the triple-helix DNA molecular switch and hybridizes with a long-strand recognition probe (RP) to form a double-stranded DNA (dsDNA). Exonuclease ExoIII is added to specifically recognize and cut the dsDNA and to release the target DNA. The target DNA strand then circulates back completely to open the multiple triple-helix DNA molecular switch, releasing a large number of signal transduction probes (STP). To hybridize with CP, a large amount of STP is added to the electrode. Finally, a AuNPs@DNA signal probe is added to hybridize with STP. H1 and H2 probes are added for the hybridization chain reaction and the indefinite extension of the primer strand on the probe. Then, tris-(bipyridyl)ruthenium(II) is added for ECL signal detection with PBS-tri-n-propylamine as the base solution. In the concentration range 1.0 × 10-16 to 1.0 × 10-8 mol/L of the target DNA, good linear relationship was achieved with the corresponding ECL signal. The detection limit is 3.6 × 10-17 mol/L. The spiked recovery of the rice samples range from 97.2 to 101.5%. The sensor is highly sensitive and has good selectivity, stability, and reproducibility. A novel electrochemiluminescence biosensor with extremely higher sensitivity was prepared for the determination of ultra-trace amount transgenic rice BT63 DNA. The sensitivity was significantly improved by multiple signal enhancements. Firstly, a large number of signal transduction probes are released when the triple-helix DNA molecular switch unlock after recycles assisted by ExoIII exonuclease under target BT63 DNA; and then the signal transduction probes hybridize with the signal probes of AuNPs@(DNA-HCR) produced through hybridization chain reaction. Finally, the signal probes which were embedded with a large amount of electrochemiluminescence reagent produce high luminescence intensity. The detection limit was 3.6 × 10-17 mol/L, which is almost the most sensitive methods reported.

Electrochemiluminescence biosensor for microRNA determination based on AgNCs@MoS2 composite with (AuNPs-Semicarbazide)@Cu-MOF as coreaction accelerator.

A novel electrochemiluminescence (ECL) biosensor was fabricated for miRNA-162a detection by using silver nanoclusters/molybdenum disulfide (AgNCs@MoS2) as an ECL material, peroxodisulfate (S2O82-) as a co-reactant, and semicarbazide (Sem) as a co-reaction accelerator. Firstly, hairpin probe Ha modified on AgNCs@MoS2/GCE was unfolded based on its hybridization with target microRNA. Then, the unfolded Ha can further be hybridized with another hairpin DNA of Hb on (AuNPs-semicarbazide)@Cu-MOF, resulting in the release of target microRNA, which further causes a cyclic hybridization. This creates more (AuNPs-semicarbazide)@Cu-MOF on the electrode surface, achieving cyclic hybridization signal amplification. Strikingly, due to the presence of Sem, accelerating the reduction of S2O82- and resulting in the generation of more oxidant intermediates of SO42-, the amount of excited states of Agincreases to further amplify the ECL signal. The biosensor exhibited high sensitivity with a low LOD of 1.067 fM, indicating that the introduction of co-reaction accelerators can provide an effective method for signal amplification. The applicability of this method was assessed by investigating the effect of Pb(II) ion on miRNA-162a expression level in maize seedling leaves. A novel electrochemiluminescence biosensor was fabricated for miRNA-162a detection by using silver nanoclusters/molybdenum disulfide as an ECL material, peroxodisulfate as a co-reactant, and semicarbazide as a co-reaction accelerator.

Three-dimensional bipedal DNA walker enabled logic gates responding to telomerase and miRNA.

In this work, we have developed a simple and reliable platform for simultaneous analysis of telomerase and miRNA. A three-dimensional bipedal DNA walking strategy is designed utilizing gold nanoparticles and MnO2 nanosheets. Given the merits of fast, sensitive and selective analysis, the developed method has great potential application in early clinical diagnosis.

A rapid diagnosis of SARS-CoV-2 using DNA hydrogel formation on microfluidic pores.

The coronavirus disease 2019 (COVID-19) pandemic has been a major public health challenge in 2020. Early diagnosis of COVID-19 is the most effective method to control disease spread and prevent further mortality. As such, a high-precision and rapid yet economic assay method is urgently required. Herein, we propose an innovative method to detect severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) using isothermal amplification of nucleic acids on a mesh containing multiple microfluidic pores. Hybridization of pathogen DNA and immobilized probes forms a DNA hydrogel by rolling circle amplification and, consequently, blocks the pores to prevent fluid movement, as observed. Following optimization of several factors, including pore size, mesh location, and precision microfluidics, the limit of detection (LOD) for SARS-CoV-2 was determined to be 0.7 aM at 15-min incubation. These results indicate rapid, easy, and effective detection with a moderate-sized LOD of the target pathogen by remote point-of-care testing and without the requirement of any sophisticated device.

Simultaneous electrochemical determination of nuc and mecA genes for identification of methicillin-resistant Staphylococcus aureus using N-doped porous carbon and DNA-modified MOF.

The detection of Staphylococcus aureus specific gene in combination with the mecA gene is vitally important for accurate identification of methicillin-resistant Staphylococcus aureus (MRSA). A homogeneous electrochemical DNA sensor was fabricated for simultaneous detection of mecA and nuc gene in MRSA. Metal-organic framework (type UiO-66-NH2) was applied as nanocarrier. Two electroactive dyes, methylene blue (MB) and epirubicin (EP), were encapsulated in UiO-66-NH2, respectively, and were locked by the hybrid double-stranded DNA. Based on the target-response electroactive dye release strategy, once target DNA exists, it completely hybridizes with displacement DNA (DEP and DMB). So DEP and DMB is displaced from the MOF surface, causing the release of electroactive dyes. Co-Zn bimetallic zeolitic imidazolate framework-derived N-doped porous carbon serves for electrode modification to improve electrocatalytic performance and sensitivity. The differential pulse voltammetry peak currents of MB and EP were accurately detected at - 0.14 V and - 0.53 V versus the Ag/AgCl reference electrode, respectively. Under the optimal conditions, the detection limits of mecA gene and nuc gene were 3.7 fM and 1.6 fM, respectively. Combining the effective application of MOFs and the homogeneous detection strategy, the sensor exhibited satisfactory performance for MRSA identification in real samples. The recovery was 92.6-103%, and the relative standard deviation was less than 5%. Besides, MRSA and SA can also be distinguished. This sensor has great potential in practical applications.

Recent Applications of Carbon Nanomaterials for microRNA Electrochemical Sensing.

MicroRNA (miRNA) is an important tumor marker in the human body, and its early detection has a great influence on the survival rate of patients. Although there are many detection methods for miRNA at present such as northern blotting, real-time quantitative polymerase chain reaction, microarrays, and others, electrochemical biosensors have the advantages of low detection cost, small instrument size, simple operation, non-invasive detection and low consumption of reagents and solvents, and thus they play an important role in the early detection of cancer. In addition, with the development of nanotechnology, nano-biosensors show great potential. The application of various nanomaterials in the development of electrochemical biosensor has greatly improved the detection sensitivity of electrochemical biosensor. Among them, carbon nanomaterials which have unique electrical, optical, physical and chemical properties have attracted increasing attention. In particular, they have a large surface area, good biocompatibility and conductivity. Therefore, carbon nanomaterials combined with electrochemical methods can be used to detect miRNA quickly, easily and sensitively. In this review, we systematically review recent applications of different carbon nanomaterials (carbon nanotubes, graphene and its derivatives, graphitic carbon nitride, carbon dots, graphene quantum dots and other carbon nanomaterials) for miRNA electrochemical detection. In addition, we demonstrate the future prospects of electrochemical biosensors modified by carbon nanomaterials for the detection of miRNAs, and some suggestions for their development in the near future.

Gold nanoparticle/DNA-based nanobioconjugate for electrochemical detection of Zika virus.

The development of a stable nanobioconjugate based on gold nanoparticles (AuNPs) linked to single-strand DNA (ssDNA) is reported for amplification of the electrochemical signal of a Zika virus (ZIKV) genetic material-based bioassay, with high sensitivity. The genosensor was assembled either at a screen-printed gold electrode (SPAuE) or a screen-printed carbon electrode decorated with hierarchical gold nanostructures (SPCE/Au), with Ru3+ as an electrochemical reporter. The genosensor response, interrogated by differential pulse voltammetry (DPV) at the transient current density, was linear from 10 to 600 fM and from 500 fM to 10 pM of the target, with a sensitivity of 2.7 and 2.9 µA cm-2 M-1 and a limit of detection of 0.2 and 33 fM at the SPAuE and SPCE/Au, respectively. The resultant genosensor detected ZIKV genetic material in raw serum samples from infected patients, with no sample pretreatment in a polymerase chain reaction amplification-free assay. The proposed ultrasensitive nanobioconjugate-based system offers a step forward to the diagnosis of the ZIKV, closer to the patient, and holds the potential for signal amplification in biosensing of a myriad of applications.Graphical abstract.

Paper-based electrochemiluminescence determination of streptavidin using reticular DNA-functionalized PtCu nanoframes and analyte-triggered DNA walker.

A paper-based electrochemiluminescence (ECL) biosensor characterized by the signal amplification of reticular DNA-functionalized PtCu nanoframes (DNA-PtCuTNFs) and analyte-triggered DNA walker was developed for sensitive streptavidin assay. Silver microflower functionalized paper-based sensing platform was prepared to fix the hairpin strand (S1). With addition of the streptavidin, plenty of DNA walkers consisting of the walking strands (S2) labeled with biotin and streptavidin were established, which protected S2 from digestion via the terminal protection mechanism. The sequential introduction of the DNA walker and capture probe initiated the hairpin structure opening of S1 and strand displacement reaction (SDR) happening, causing the S2 release. Subsequently, S1 hybridized with S3. The free S2 further hybridized with adjacent S1 to trigger the next cycle. After multiple cycles, the DNA-PtCuTNFs, the fire-new signal enhancer, with remarkable peroxidase activity, were successfully attached onto the paper electrode via metal-catalyst-free click chemistry. Based on the SDR of the DNA walker and the catalysis of DNA-PtCuTNFs, a significantly boosted ECL signal of luminol was obtained. Under the optimal conditions, the developed sensor for streptavidin assay exhibited a low detection limit of 33.4 fM with a linear range from 0.1 pM to 0.1 µM. Graphical abstract.