Functionalized poly(3-hydroxybutyric acid) bodies as new in vitro biocatalysts.

Cytochromes P450 play a key role in the drug and steroid metabolism in the human body. This leads to a high interest in this class of proteins. Mammalian cytochromes P450 are rather delicate. Due to their localization in the mitochondrial or microsomal membrane, they tend to aggregate during expression and purification and to convert to an inactive form so that they have to be purified and stored in complex buffers. The complex buffers and low storage temperatures, however, limit the feasibility of fast, automated screening of the corresponding cytochrome P450-effector interactions, which are necessary to study substrate-protein and inhibitor-protein interactions. Here, we present the production and isolation of functionalized poly(3-hydroxybutyrate) granules (PHB bodies) from Bacillus megaterium MS941 strain. In contrast to the expression in Escherichia coli, where mammalian cytochromes P450 are associated to the cell membrane, when CYP11A1 is heterologously expressed in Bacillus megaterium, it is located on the PHB bodies. The surface of these particles provides a matrix for immobilization and stabilization of the CYP11A1 during the storage of the protein and substrate conversion. It was demonstrated that the PHB polymer basis is inert concerning the performed conversion. Immobilization of the CYP11A1 onto the PHB bodies allows freeze-drying of the complex without significant decrease of the CYP11A1 activity. This is the first lyophilization of a mammalian cytochrome P450, which allows storage over more than 18days at 4°C instead of storage at -80°C. In addition, we were able to immobilize the cytochrome P450 on the PHB bodies in vitro. In this case the expression of the protein is separated from the production of the immobilization matrix, which widens the application of this method. This article is part of a Special Issue entitled: Cytochrome P450 biodiversity and biotechnology, edited by Erika Plettner, Gianfranco Gilardi, Luet Wong, Vlada Urlacher, Jared Goldstone.

Modern Approaches to Studies of New Osteogenic Biomaterials on the Model of Regeneration of Critical-Size Cranial Defects in Rats.

Osteoinductive characteristics of new osteoplastic materials based on demineralized bone matrix of xenogenic origin with high and controlled degree of purification were studied on the model of regeneration of critical-size cranial defects in rats using modern approaches, including histological analysis, evaluation of morphological parameters of the bone tissue obtained by micro-computed tomography, and estimation of bone tissue growth rate using in vivo fluorochrome label. Demineralized bone matrix and, to a much greater extent, its activated form containing modified recombinant growth factor rhBMP-2 with high content of the dimeric form exhibited osteoinductive activity.

Expansion of NK cells from PBMCs using immobilized 4-1BBL and interleukin-21.

Adoptive transfer of NK cells has been widely applied clinically for cancer immunotherapy. However, the difficulties to obtain a large number of activated NK cells impede the successful application of such therapy. In the present study, we implemented a novel method involving the use of immobilized human 4-1BBL and interleukin-21 to amplify NK cells from the peripheral blood mononuclear cells (PBMCs) of healthy donors. Following stimulation for 21 days, we achieved considerable expansion of NK cells with high purity and strong cytotoxicity. This is the first time solid phase cytokines were used to augment NK cells, and this method has the advantage of no need to introduce feeder cells, without prior purification of NK cells and it effectively stimulated and expanded NK cells. The strategy of cell proliferation and activation could lead to a safer and more effective application of NK cells clinically.

Specific and reversible immobilization of proteins tagged to the affinity polypeptide C-LytA on functionalized graphite electrodes.

We have developed a general method for the specific and reversible immobilization of proteins fused to the choline-binding module C-LytA on functionalized graphite electrodes. Graphite electrode surfaces were modified by diazonium chemistry to introduce carboxylic groups that were subsequently used to anchor mixed self-assembled monolayers consisting of N,N-diethylethylenediamine groups, acting as choline analogs, and ethanolamine groups as spacers. The ability of the prepared electrodes to specifically bind C-LytA-tagged recombinant proteins was tested with a C-LytA-ß-galactosidase fusion protein. The binding, activity and stability of the immobilized protein was evaluated by electrochemically monitoring the formation of an electroactive product in the enzymatic hydrolysis of the synthetic substrate 4-aminophenyl ß-D-galactopyranoside. The hybrid protein was immobilized in an specific and reversible way, while retaining the catalytic activity. Moreover, these functionalized electrodes were shown to be highly stable and reusable. The method developed here can be envisaged as a general, immobilization procedure on the protein biosensor field.

Preparation of protein arrays using cell-free protein expression.

Protein microarrays are a miniaturized format for assaying functional protein interactions and proteomics using a high-throughput, multiplexed approach. The primary limitations of this technology include the time and cost involved in the production of highly purified individual proteins for arraying and also the limited stability of functional proteins once arrayed. In light of these difficulties, cell-free protein expression systems are being increasingly used to generate protein arrays in situ from coding DNA sequences. This chapter describes the method DNA array to protein array (DAPA) allowing the repeated "printing" of protein arrays directly from a DNA array template using cell-free protein expression. Once the DNA templates have been spotted, the generation of the protein array involves only simple handling procedures and is relatively time and cost-efficient, and protein arrays can easily be produced "on demand" as and when required. The resultant protein array may be used for any downstream applications as for conventionally spotted protein arrays.

Novel strategy for production of aggregation-prone proteins and lytic enzymes in Escherichia coli based on an anchored periplasmic expression system.

For over 2 decades, Escherichia coli has been successfully used for the production of various recombinant proteins. However, several technical limitations have influenced the extent of recombinant protein expression in the E. coli host because of (i) heterologous protein accumulation often observed in inactive inclusion bodies either in the cytoplasm or periplasm, or (ii) lytic activity of recombinant proteins, which causes cell lysis, that hinder high production yield. We developed a novel strategy for the efficient production of aggregation-prone proteins and lytic enzymes in the E. coli host. For this purpose, we used an anchored periplasmic expression (APEx) system, in which target proteins are produced in the periplasm and tethered on the inner membrane. Protein aggregation and lytic activity can be prevented through anchoring of individual proteins to the inner membrane. Two model proteins (aggregation-prone human leptin and lytic Pseudomonas fluorescens SIK W1 lipase) were examined, and both proteins were successfully produced and anchored to the inner membrane under optimized culture conditions. Upon expression, the inner membrane-anchored proteins were subjected to simple purification procedures; the proteins were confirmed to be of high purity and bioactivity.

Molecular assembly of zinc chlorophyll derivatives by using recombinant light-harvesting polypeptides with His-tag and immobilization on a gold electrode.

LH1-α and -ß polypeptides, which make up the light-harvesting 1 (LH1) complex of purple photosynthetic bacteria, along with bacteriochlorophylls, have unique binding properties even for various porphyrin analogs. Herein, we used the porphyrin analogs, Zn-Chlorin and the Zn-Chlorin dimer, and examined their binding behaviors to the LH1-α variant, which has a His-tag at the C-terminus (MBP-rubα-YH). Zn-Chlorin and the Zn-Chlorin dimer could bind to MBP-rubα-YH and form a subunit-type assembly, similar to that from the native LH1 complex. These complexes could be immobilized onto Ni-nitrilotriacetic acid-modified Au electrodes, and the cathodic photocurrent was successfully observed by photoirradiation. Since Zn-Chlorins in this complex are too far for direct electron transfer from the electrode, a contribution of polypeptide backbone for efficient electron transfer was implied. These findings not only show interesting properties of LH1-α polypeptides but also suggest a clue to construct artificial photosynthesis systems using these peptide materials.

A linker peptide with high affinity towards silica-containing materials.

A peptide sequence with affinity to silica-containing materials was fused to a truncated form of Streptococcus strain G148 Protein G. The resulting recombinant Linker-Protein G (LPG) was produced in Escherichia coli and purified to apparent homogeneity. It displayed high affinity towards two natural clinoptilolite zeolites. The LPG also displayed high binding affinity towards commercial-grade synthetic zeolite, silica and silica-containing materials. A commercial sample of the truncated Protein G and a basic protein, both without the linker, did not bind to natural or synthetic zeolites or silica. We conclude that the zeolite-binding affinity is mediated by the linker peptide sequence. As a consequence, these data may imply that the binding affinity is directed to the SiO2 component rather than to the atomic orientation on the zeolite crystal surface as previously assumed.

Protein-carbon nanotube sensors: single platform integrated micro clinical lab for monitoring blood analytes.

Design of a unique, single-platform, integrated, multichannel sensor based on carbon nanotube (CNT)-protein adducts specific to each one of the major analytes of blood, glucose, cholesterol, triglyceride, and Hb1AC is presented. The concept underlying the sensor, amperometric detection, is applicable to various disease-monitoring strategies. There is an urgent need to enhance the sensitivity of glucometers to <5% level instead of greater than the present 15% standard in these detectors. CNTs enhance the signals derived from the interaction of the enzymes with the different analytes in blood. Fabricated sensors using the new methodology is a point-of-care device that is targeted for home, clinical, and emergency use and can be redesigned for continuous monitoring for critical care patients.

Noncompetitive immunodetection of benzaldehyde by open sandwich ELISA.

Benzaldehyde (Bz) is a typical fragrant compound for peach-flavored beverages. In the food and beverage industries there is great demand for a sensitive and easy detection system of Bz in order to ensure product quality control and to avoid contamination. For the noncompetitive detection of Bz, we applied an open-sandwich enzyme-linked immunosorbent assay (OS-ELISA) utilizing an antigen-dependent reassociation of antibody variable region fragments, VH and VL. We cloned the VH and VL genes of an anti-Bz monoclonal antibody, and the fragments were individually expressed and purified as a bacterial alkaline phosphatase (BAP)-conjugated form for VH and as a thioredoxine (Trx)-fused form for VL, respectively. Using these VH and VL fragments, we successfully constructed the OS-ELISA system for Bz detection. The Bz-induced formation of a trimolecular complex composed of VH-BAP/Bz/Trx-VL was readily detected by a dose-dependent increase in the BAP activity of the VH-fusion protein.