Impact of the preservation media on ex vivo bone samples for full field mechanical testing.

The preservation method to store bone tissue for posterior analysis is a widespread practice. However, the method's potential influence on the material's mechanical properties is often overlooked during single-point experimentation. Saline and formaldehyde solutions are the most common among the employed preservation media. A full field analysis of the mice femoral bone deformation using non-destructive optical techniques is conducted to assess the influence of the storage media on the viscoelastic properties of the tissue. Three different groups are subjected to a standard three-point bending test. The first group is the control, with fresh post-mortem samples. The second and third groups used saline and formaldehyde solutions, respectively. During the mechanical test, the bone's surface and internal deformation are monitored simultaneously using digital holographic interferometry and Fourier-domain optical coherence tomography. A mechanical comparison among the three groups is presented. The results show that after 48 h of immersion in saline solution, the mice bones keep their viscoelastic behavior similar to fresh bones. Meanwhile, 48 h in formaldehyde modifies the response and affects the marrow structure. The high sensitivity of the optical phase also makes it possible to observe changes in the anisotropy of the samples. As a comparison, Raman spectroscopy analyzes the three bone groups to prove that the preservation media does not affect a single-point inspection.

Biolayer-Interferometry-Guided Functionalization of Screen-Printed Graphene for Label-Free Electrochemical Virus Detection.

Additive manufacturing holds promise for rapid prototyping and low-cost production of biosensors for diverse pathogens. Among additive manufacturing methods, screen printing is particularly desirable for high-throughput production of sensing platforms. However, this technique needs to be combined with carefully formulated inks, rapid postprocessing, and selective functionalization to meet all requirements for high-performance biosensing applications. Here, we present screen-printed graphene electrodes that are processed with thermal annealing to achieve high surface area and electrical conductivity for sensitive biodetection via electrochemical impedance spectroscopy. As a proof-of-concept, this biosensing platform is utilized for electrochemical detection of SARS-CoV-2. To ensure reliable specificity in the presence of multiple variants, biolayer interferometry (BLI) is used as a label-free and dynamic screening method to identify optimal antibodies for concurrent affinity to the Spike S1 proteins of Delta, Omicron, and Wild Type SARS-CoV-2 variants while maintaining low affinity to competing pathogens such as Influenza H1N1. The BLI-identified antibodies are robustly bound to the graphene electrode surface via oxygen moieties that are introduced during the thermal annealing process. The resulting electrochemical immunosensors achieve superior metrics including rapid detection (55 s readout following 15 min of incubation), low limits of detection (approaching 500 ag/mL for the Omicron variant), and high selectivity toward multiple variants. Importantly, the sensors perform well on clinical saliva samples detecting as few as 103 copies/mL of SARS-CoV-2 Omicron, following CDC protocols. The combination of the screen-printed graphene sensing platform and effective antibody selection using BLI can be generalized to a wide range of point-of-care immunosensors.

A Multi-Faceted Binding Assessment of Aptamers Targeting the SARS-CoV-2 Spike Protein.

The COVID-19 pandemic has underscored the critical need for the advancement of diagnostic and therapeutic platforms. These platforms rely on the rapid development of molecular binders that should facilitate surveillance and swift intervention against viral infections. In this study, we have evaluated by three independent research groups the binding characteristics of various published RNA and DNA aptamers targeting the spike protein of the SARS-CoV-2 virus. For this comparative analysis, we have employed different techniques such as biolayer interferometry (BLI), enzyme-linked oligonucleotide assay (ELONA), and flow cytometry. Our data show discrepancies in the reported specificity and affinity among several of the published aptamers and underline the importance of standardized methods, the impact of biophysical techniques, and the controls used for aptamer characterization. We expect our results to contribute to the selection and application of suitable aptamers for the detection of SARS-CoV-2.

Red-on-Yellow Queen: Bio-Layer Interferometry Reveals Functional Diversity Within Micrurus Venoms and Toxin Resistance in Prey Species.

Snakes in the family Elapidae largely produce venoms rich in three-finger toxins (3FTx) that bind to the α 1 subunit of nicotinic acetylcholine receptors (nAChRs), impeding ion channel activity. These neurotoxins immobilize the prey by disrupting muscle contraction. Coral snakes of the genus Micrurus are specialist predators who produce many 3FTx, making them an interesting system for examining the coevolution of these toxins and their targets in prey animals. We used a bio-layer interferometry technique to measure the binding interaction between 15 Micrurus venoms and 12 taxon-specific mimotopes designed to resemble the orthosteric binding region of the muscular nAChR subunit. We found that Micrurus venoms vary greatly in their potency on this assay and that this variation follows phylogenetic patterns rather than previously reported patterns of venom composition. The long-tailed Micrurus tend to have greater binding to nAChR orthosteric sites than their short-tailed relatives and we conclude this is the likely ancestral state. The repeated loss of this activity may be due to the evolution of 3FTx that bind to other regions of the nAChR. We also observed variations in the potency of the venoms depending on the taxon of the target mimotope. Rather than a pattern of prey-specificity, we found that mimotopes modeled after snake nAChRs are less susceptible to Micrurus venoms and that this resistance is partly due to a characteristic tryptophan → serine mutation within the orthosteric site in all snake mimotopes. This resistance may be part of a Red Queen arms race between coral snakes and their prey.

In-situ and label-free measurement of cytochrome C concentration with a Ti2C-MXene sensitized fiber-optic MZI sensor.

BACKGROUND: The concentration of cytochrome C is demonstrated to be an effective indicator of the microbial corrosion strength of metals. Traditional cytochrome C sensor can detect cytochrome C with a low detection limit, but their use is limited by their high cost, cumbersome operation, and susceptibility to malignant environments. In addition, studies on the monitoring of cytochrome C in the field of microbial corrosion has still not been carried out. Therefore, there is a need for a highly sensitive, selective, low-cost, anti-interference, and stable cytochrome C sensor with online monitoring and remote sensing capabilities for in-situ measurement of microbial corrosion strength. RESULTS: This paper proposed a highly sensitive label-free fiber-optic sensor based on Mach-Zehnder interferometer (MZI) for in-situ measurement of the microbial corrosion marker cytochrome C. Two-dimensional Ti2C-MXene material is uniformly immobilized onto the surface of the sensing area to improve the sensitivity, hydrophilicity, and specific surface area of the sensing area, as well as to facilitate the immobilization of specific sensitive materials. The cytochrome C antibody is modified on the surface of Ti2C-MXene to specifically recognize cytochrome C, whose concentration variation can be measured by monitoring the spectral shift of MZI sensor. Results demonstrate a measurement sensitivity of 1.428 nm/µM for cytochrome C concentrations ranging from 0 to 7.04 µM. The detection limit of the sensor is calculated to be 0.392 µM with remarkable performance, including selectivity, stability, and reliability. Besides, the measurement result of the proposed sensor in real microbial corrosive environment is consistent with that of the ideal environment. SIGNIFICANCE AND NOVELTY: This is the first instance of achieving in-situ and label-free measurement of cytochrome C by using a fiber-optic MZI sensor, which undoubtedly provides a feasible solution for the effective monitoring of microbial metal corrosion in the environment.

Cytokine/Antibody Fusion Protein Design and Evaluation.

Cytokines constitute a class of secreted proteins that activate transmembrane receptors to coordinate a vast array of physiological processes, particularly those related to immune activity. Due to their vital role in immune regulation, cytokines have garnered great interest as potential therapeutic agents. Unfortunately, the clinical success of cytokine drugs has been limited by their multifunctional activities, which hinder therapeutic performance and lead to harmful toxicities. In addition, the strikingly short circulation half-life of cytokines further hampers their efficacy as drugs. To overcome the translational challenges associated with natural cytokines, significant efforts have focused on engineering cytokines to target their activities and improve their pharmacological properties. One such strategy is the design of fusion proteins that tether a cytokine to an anti-cytokine antibody that selectively biases its functions and extends its serum half-life. These cytokine/antibody fusion proteins (termed immunocytokines) assemble intramolecularly to bias cytokine signaling behavior through multi-layered structural and molecular effects. Here, we present a detailed workflow for the design, production, and functional validation of intramolecularly assembled immunocytokines. In-depth procedures are presented for gene manipulation, mammalian cell-based expression and purification, binding analysis via bio-layer interferometry, and interrogation of cytokine signaling activity on human primary cells. In contrast with immunocytokines in which the tethered cytokine and antibody do not bind one another, intramolecularly assembled immunocytokines require special considerations with respect to their production to avoid oligomerization and/or aggregation. The protocol herein was developed based on experience with immunocytokines that incorporate interleukin-2 (IL-2); however, this modular approach can be extended to any cytokine of interest for a broad range of biomedical applications. © 2024 Wiley Periodicals LLC. Basic Protocol 1: Design and generation of immunocytokine genes Basic Protocol 2: Immunocytokine expression and purification Basic Protocol 3: Validation of immunocytokine assembly and binding by bio-layer interferometry Basic Protocol 4: Analysis of immunocytokine signaling on human primary cells.

Interferometric Biosensor for High Sensitive Label-Free Recording of HiPS Cardiomyocytes Contraction in Vitro.

Heart disease remains a leading cause of global mortality, underscoring the need for advanced technologies to study cardiovascular diseases and develop effective treatments. We introduce an innovative interferometric biosensor for high-sensitivity and label-free recording of human induced pluripotent stem cell (hiPSC) cardiomyocyte contraction in vitro. Using an optical cavity, our device captures interference patterns caused by the contraction-induced displacement of a thin flexible membrane. First, we demonstrate the capability to quantify spontaneous contractions and discriminate between contraction and relaxation phases. We calculate a contraction-induced vertical membrane displacement close to 40 nm, which implies a traction stress of 34 ± 4 mN/mm2. Finally, we investigate the effects of a drug compound on contractility amplitude, revealing a significant reduction in contractile forces. The label-free and high-throughput nature of our biosensor may enhance drug screening processes and drug development for cardiac treatments. Our interferometric biosensor offers a novel approach for noninvasive and real-time assessment of cardiomyocyte contraction.

Rapid identity testing of antibody-based hot targeted radionuclide therapies by bio-layer interferometry.

Targeted Radionuclide Therapies (TRT) involve the tailored combination of a therapeutic radionuclide and a targeting molecule, as for instance antibodies or fragments thereof. Despite their short shelf-life, these drug products must meet stringent regulatory standards before use. We introduce a novel, efficient method utilizing Bio-Layer Interferometry (BLI) for rapid identity testing of TRT drug products in less than five minutes. This approach not only reduces radioactive waste but also minimizes operator exposure to radiation. This label-free method has been successfully developed and validated for three different TRT products, ensuring compliance with Good Manufacturing Practices (GMP). Furthermore, we outline our strategic approach to the production and testing of custom biosensors for each product, firmly grounded in Quality-by-Design (QbD) principles.

A four-grating interferometer for x-ray multi-contrast imaging.

BACKGROUND: X-ray multi-contrast imaging with gratings provides a practical method to detect differential phase and dark-field contrast images in addition to the x-ray absorption image traditionally obtained in laboratory or hospital environments. Systems have been developed for preclinical applications in areas including breast imaging, lung imaging, rheumatoid arthritis hand imaging and kidney stone imaging. PURPOSE: Prevailing x-ray interferometers for multi-contrast imaging include Talbot-Lau interferometers and universal moiré effect-based phase-grating interferometers. Talbot-Lau interferometers suffer from conflict between high interferometer sensitivity and large field of view (FOV) of the object being imaged. A small period analyzer grating is necessary to simultaneously achieve high sensitivity and large FOV within a compact imaging system but is technically challenging to produce for high x-ray energies. Phase-grating interferometers suffer from an intrinsic fringe period ranging from a few micrometers to several hundred micrometers that can hardly be resolved by large area flat panel x-ray detectors. The purpose of this work is to introduce a four-grating x-ray interferometer that simultaneously allows high sensitivity and large FOV, without the need for a small period analyzer grating. METHODS: The four-grating interferometer consists of a source grating placed downstream of and close to the x-ray source, a pair of phase gratings separated by a fixed distance placed downstream of the source grating, and an analyzer grating placed upstream of and close to the x-ray detector. The object to be imaged is placed upstream of and close to the phase-grating pair. The distance between the source grating and the phase-grating pair is designed to be far larger than that between the phase-grating pair and the analyzer grating to promote simultaneously high sensitivity and large FOV. The method was evaluated by constructing a four-grating interferometer with an 8 µm period source grating, a pair of phase gratings of 2.4 µm period, and an 8 µm period analyzer grating. RESULTS: The fringe visibility of the four-grating interferometer was measured to be ≈24% at 40 kV and ≈18% at 50 kV x-ray tube operating voltage. A quartz bead of 6 mm diameter was imaged to compare the theoretical and experimental phase contrast signal with good agreement. Kidney stone specimens were imaged to demonstrate the potential of such a system for classification of kidney stones. CONCLUSIONS: The proposed four-grating interferometer geometry enables a compact x-ray multi-contrast imaging system with simultaneously high sensitivity and large FOV. Relaxation of the requirement for a small period analyzer grating makes it particularly suitable for high x-ray energy applications such as abdomen and chest imaging.

Influence of Aberration-Free, Narrowband Light on the Choroidal Thickness and Eye Length.

Purpose: To determine whether light chromaticity without defocus induced by longitudinal chromatic aberration (LCA) is sufficient to regulate eye growth. Methods: An interferometric setup based on a spatial light modulator was used to illuminate the dominant eyes of 23 participants for 30 minutes with three aberration-free stimulation conditions: (1) short wavelength (450 nm), (2) long wavelength (638 nm), and (3) broadband light (450-700 nm), covering a retinal area of 12°. The non-dominant eye was occluded and remained as the control eye. Axial length and choroidal thickness were measured before and after the illumination period. Results: Axial length increased significantly from baseline for short-wavelength (P < 0.01, 7.4 ± 2.2 µm) and long-wavelength (P = 0.01, 4.8 ± 1.7 µm) light. The broadband condition also showed an increase in axial length with no significance (P = 0.08, 5.1 ± 3.5 µm). The choroidal thickness significantly decreased in the case of long-wavelength light (P < 0.01, -5.7 ± 2.2 µm), but there was no significant change after short-wavelength and broadband illumination. The axial length and choroidal thickness did not differ significantly between the test and control eyes or between the illumination conditions (all P > 0.05). Also, the illuminated versus non-illuminated choroidal zone did not show a significant difference (all P > 0.05). Conclusions: All stimulation conditions with short- and long-wavelength light and broadband light led to axial elongation and choroidal thinning. Therefore, light chromaticity without defocus induced by LCA is suggested to be insufficient to regulate eye growth. Translational Relevance: This study helps in understanding if light chromaticity alone is a sufficient regulator of eye growth.

A rapid and sensitive aptamer-based biosensor for beta-lactoglobulin in milk.

Beta-lactoglobulin (ß-Lg), a prominent milk protein, is a major contributor to milk allergies. The quantitative assessment of ß-Lg is a valuable method for assessing the allergenic potential of dairy products. In this study, a specific aptamer, ß-Lg-01, with an affinity constant (KD) of 28.6 nM for ß-Lg was screened through seven rounds of magnetic bead SELEX (MB-SELEX). A novel bio-layer interferometry (BLI)-based aptasensor was developed, which had a limit of detection (LOD) of 0.3 ng mL-1, a linear range of 1.5 ng mL-1-15 µg mL-1, and a recovery rate of 102-116% among the milk samples. This aptasensor provides a potential tool for the detection and risk assessment of ß-Lg within 10 min.

Detection of early pulmonary emphysema by multi-contrast x-ray Talbot-Lau interferometer.

BACKGROUND: Pulmonary emphysema is a part of chronic obstructive pulmonary disease, which is an irreversible chronic respiratory disease. In order to avoid further damage to lung tissue, early diagnosis and treatment of pulmonary emphysema is essential. PURPOSE: Early pulmonary emphysema diagnosis is difficult with conventional radiographic imaging. Recently, x-ray phase contrast imaging has proved to be an effective and promising imaging strategy for soft tissue, due to its high sensitivity and multi-contrast. The aim of this study is to diagnose pulmonary emphysema early utilizing an x-ray Talbot-Lau interferometer (TLI). METHODS: We successfully established the mouse model of emphysema by porcine pancreatic elastase treatment, and then used the established x-ray TLI to perform imaging experiments on the mice with different treatment time. The traditional absorption CT and phase contrast CT were obtained simultaneously through TLI. The CT results and histopathology of mice lung in different treatment time were quantitatively analyzed. RESULTS: By imaging mice lungs, it can be found that phase contrast has higher sensitivity than absorption contrast in early pulmonary emphysema. The results show that the phase contrast signal could distinguish the pulmonary emphysema earlier than the conventional attenuation signal, which can be consistent with histological images. Through the quantitative analysis of pathological section and phase contrast CT, it can be found that there is a strong linear correlation. CONCLUSIONS: In this study, we quantitatively analyze mean linear intercept of histological sections and CT values of mice. The results show that the phase contrast signal has higher imaging sensitivity than the attenuation signal. X-ray TLI multi-contrast imaging is proved as a potential diagnostic method for early pulmonary emphysema in mice.

High-resolution cell imaging using white light phase shifting interferometry and iterative phase deconvolution.

An optimization algorithm is presented for the deconvolution of a complex field to improve the resolution and accuracy of quantitative phase imaging (QPI). A high-resolution phase map can be recovered by solving a constrained optimization problem of deconvolution using a complex gradient operator. The method is demonstrated on phase measurements of samples using a white light based phase shifting interferometry (WLPSI) method. The application of the algorithm on real and simulated objects shows a significant resolution and contrast improvement. Experiments performed on Escherichia coli bacterium have revealed its sub-cellular structures that were not visible in the raw WLPSI images obtained using a five phase shifting method. These features can give valuable insights into the structures and functioning of biological cells. The algorithm is simple in implementation and can be incorporated into other QPI modalities .

Effect of sound-induced vibrations of the pinna on head-related transfer functions: Experimental and numerical investigations.

Numerical simulations of head-related transfer functions (HRTFs) conventionally assume a rigid boundary condition for the pinna. The human pinna, however, is an elastic deformable body that can vibrate due to incident acoustic waves. This work investigates how sound-induced vibrations of the pinna can affect simulated HRTF magnitudes. The work will motivate the research question by measuring the sound-induced vibrational patterns of an artificial pinna with a high-speed holographic interferometric system. Then, finite element simulations are used to determine HRTFs for a tabletop model of the B&K 5128 head and torso simulator for a number of directions. Two scenarios are explored: one where the pinna is modeled as perfectly rigid, and another where the pinna is modeled as linear elastic with material properties close to that of auricular cartilage. The findings suggest that pinna vibrations have negligible effects on HRTF magnitudes up to 5 kHz. The same conclusion, albeit with less certainty, is drawn for higher frequencies. Finally, the importance of the elastic domain's material properties is emphasized and possible implications for validation studies on dummy heads 1as well as the limitations of the present work are discussed in detail.

Effects of short-term exposure to red or near-infrared light on axial length in young human subjects.

PURPOSE: To determine whether visible light is needed to elicit axial eye shortening by exposure to long wavelength light. METHODS: Incoherent narrow-band red (620 ± 10 nm) or near-infrared (NIR, 875 ± 30 nm) light was generated by an array of light-emitting diodes (LEDs) and projected monocularly in 17 myopic and 13 non-myopic subjects for 10 min. The fellow eye was occluded. Light sources were positioned 50 cm from the eye in a dark room. Axial length (AL) was measured before and after the exposure using low-coherence interferometry. RESULTS: Non-myopic subjects responded to red light with significant eye shortening, while NIR light induced minor axial elongation (-13.3 ± 17.3 µm vs. +6.5 ± 11.6 µm, respectively, p = 0.005). Only 41% of the myopic subjects responded to red light exposure with a decrease in AL and changes were therefore, on average, not significantly different from those observed with NIR light (+0.2 ± 12.1 µm vs. +1.1 ± 11.2 µm, respectively, p = 0.83). Interestingly, there was a significant correlation between refractive error and induced changes in AL after exposure to NIR light in myopic eyes (r(15) = -0.52, p = 0.03) and induced changes in AL after exposure to red light in non-myopic eyes (r(11) = 0.62, p = 0.02), with more induced axial elongation with increasing refractive error. CONCLUSIONS: Incoherent narrow-band red light at 620 nm induced axial shortening in 77% of non-myopic and 41% of myopic eyes. NIR light did not induce any significant changes in AL in either refractive group, suggesting that the beneficial effect of red laser light therapy on myopia progression requires visible stimulation and not simply thermal energy.

Discovery of drug targets based on traditional Chinese medicine microspheres (TCM-MPs) fishing strategy combined with bio-layer interferometry (BLI) technology.

Target discovery of natural products is a key step in the development of new drugs, and it is also a difficult speed-limiting step. In this study, a traditional Chinese medicine microspheres (TCM-MPs) target fishing strategy was developed to discover the key drug targets from complex system. The microspheres are composed of Fe3O4 magnetic nanolayer, oleic acid modified layer, the photoaffinity group (4- [3-(Trifluoromethyl)-3H-diazirin-3-yl] benzoic acid, TAD) layer and active small molecule layer from inside to outside. TAD produces highly reactive carbene under ultraviolet light, which can realize the self-assembly and fixation of drug active small molecules with non-selective properties. Here, taking Shenqi Jiangtang Granules (SJG) as an example, the constructed TCM-MPs was used to fish the related proteins of human glomerular mesangial cells (HMCs) lysate. 28 differential proteins were screened. According to the target analysis based on bioinformatics, GNAS was selected as the key target, which participated in insulin secretion and cAMP signaling pathway. To further verify the interaction effect of GNAS and small molecules, a reverse fishing technique was established based on bio-layer interferometry (BLI) coupled with UHPLC-Q/TOF-MS/MS. The results displayed that 26 small molecules may potentially interact with GNAS, and 7 of them were found to have strong binding activity. In vitro experiments for HMCs have shown that 7 active compounds can significantly activate the cAMP pathway by binding to GNAS. The developed TCM-MPs target fishing strategy combined with BLI reverse fishing technology to screen out key proteins that directly interact with active ingredients from complex target protein systems is significant for the discovery of drug targets for complex systems of TCM.

Analysis and prediction of ground deformation in Yinxi Industrial Park based on time-series InSAR technology.

Monitoring ground deformation in industrial parks is of great importance for the economic development of urban areas. However, limited research has been conducted on the deformation mechanism in industrial parks, and there is a lack of integrated monitoring and prediction models. Therefore, this study proposes a comprehensive monitoring and prediction model for industrial parks, utilizing time-series Interferometry Synthetic Aperture Radar (InSAR) technology and the Whale Optimization Algorithm-Back Propagation (WOA-BP) neural network algorithm. Taking Yinxi Industrial Park in Baiyin District as a case study, we used 68 scenes of Sentinel-1A ascending and descending orbit data from June 2018 to April 2021. The Stanford Method for Persistent Scatterers-Permanent Scatterers (StaMPS-PS) and the Small Baseline Subsets-Interferometry Synthetic Aperture Radar (SBAS-InSAR) technologies were employed to obtain the surface deformation information of the park. The deformation information obtained by the two technologies was cross-validated in terms of temporal and spatial distribution, and the vertical and east-west deformation of the park was obtained by combining the ascending and descending orbit data. The results show that the deformation feature points in the line of sight (LOS) direction obtained by the two technologies have a high consistency in spatial distribution, using the ascending orbit data as an example. Additionally, the SBAS-InSAR technology was used to obtain the east-west and vertical deformation results of the park after merging the ascending and descending orbit data for the same period. It was found that the park is mainly affected by vertical deformation, with a maximum subsidence rate of 14.67 mm/yr. The subsidence areas correspond to the deformation positions observed in field survey photos. Based on the ascending orbit deformation data, the two technologies were validated with 585 points of the same latitude and longitude, and the coefficient of determination R2 was found to be 0.82, with a root mean square error (RMSE) of 2.20 mm/a. The deformation rates were also highly consistent. Due to the 47% increase in the number of sampling points provided by the StaMPS-PS technique compared to the SBAS-InSAR technique, the former was found to be more applicable in the industrial park. Based on the ground deformation mechanism in the park, we combined the StaMPS-PS technique with the WOA-BP neural network to construct a deformation zone prediction model. We conducted predictive studies on the deformation zones of buildings and roads within the park, and the results showed that the WOA-optimized BP neural network achieved higher accuracy and lower overall error compared to the unoptimized network. Finally, we analyzed and discussed the geological conditions and inducing factors of ground deformation in the park, providing a reference for a better understanding of the deformation mechanism and early warning of disasters in the industrial park.

Protein-Protein Binding Kinetics by Biolayer Interferometry.

The specific kinetics and thermodynamics of protein-protein interactions underlie the molecular mechanisms of cellular functions; hence the characterization of these interaction parameters is central to the quantitative understanding of physiological and pathological processes. Many methods have been developed to study protein-protein interactions, which differ in various features including the interaction detection principle, the sensitivity, whether the method operates in vivo, in vitro, or in silico, the temperature control, the use of labels, immobilization, the amount of sample required, the number of measurements that can be accomplished simultaneously, or the cost. Bio-Layer Interferometry (BLI) is a label-free biophysical method to measure the kinetics of protein-protein interactions. Label-free interaction assays are a broad family of methods that do not require protein modifications (other than immobilization) or labels such as fusions with fluorescent proteins or transactivating domains or chemical modifications like biotinylation or reaction with radionuclides. Besides BLI, other label-free techniques that are widely used for determining protein-protein interactions include surface plasmon resonance (SPR), thermophoresis, and isothermal titration calorimetry (ITC), among others.

Advancing the study of protein-G4 interactions in DNA repair: Insights from biolayer interferometry.

Biolayer interferometry (BLI) is a powerful tool that enables direct observations of protein-G4 interactions in real-time. In this article, we discuss the crucial aspects in conducting a BLI experiment by using the TAR DNA-binding protein (TDP43) and a G4 DNA formed by (GGGGCC)4 as a sample application. We also describe the necessary precautions in designing the DNA substrate and evaluating the signal contributions arising from nonspecific binding interactions. A comprehensive guide is included that details the necessary materials and reagents, experimental procedures, and data analysis methods for researchers who are interested in using BLI for similar studies. The insights provided in this article will allow researchers to harness the potential of BLI and unravel the complexities of protein-G4 interactions with precision and confidence.

Real-time tracking of the adsorption of bovine serum albumin on lipid layer and its effect on lipolysis by optical interferometry.

The model proteins bovine serum albumin (BSA) and lipid layer were used to study the effect of proteins on lipolysis. A lipid layer with an interference effect was constructed by loading the triolein into the silica colloidal crystal (SCC) film. The ordered porous layer interferometry (OPLI) system was used to track the changes in lipid layer mass caused by lipase hydrolysis to achieve real-time lipolysis detection. The real-time tracking of the adsorption of BSA on the lipid layer by converting the migration of interference fringes caused by the change of the lipid layer into the optical thickness change (ΔOT). The effect of BSA on the early and late stages of lipolysis was studied, and lipases containing 5 mg/mL BSA degraded the lipid layer 3.4 times faster than lipases containing 0.1 mg/mL BSA in the later stages. This study deepens the understanding of protein-lipid interactions in complex digestive environments.