Curious Case of Pediatric One-Lung Ventilation with Two Endotracheal Tubes: A Case Report.

ABSTRACT: One-lung ventilation is indicated during thoracic surgery for visualization and exposure of surgical site. It is achieved with bronchial blockers, double-lumen endobronchial tube, single-lumen endotracheal tubes and Univent tube for infants and children. Fibreoptic bronchoscope is required for placing and confirming the correct position of these tubes. We report a perioperative management of safe conduct of one lung ventilation for a 6-year child undergoing left lower lobe lobectomy through C-MAC video laryngoscope guided two single lumen tubes in limited resource settings where paediatric-sized fibreoptic bronchoscope is unavailable.

Comparison of i-gel® and LMA® Supreme™ for Facilitating Fiberoptic Endotracheal Intubation: A Prospective Randomized Trial.

Supraglottic airway (SGA) is an alternative to endotracheal intubation, however endotracheal intubation is often essential. One method to convert from an SGA to an endotracheal tube (ETT) is utilizing the SGA as a conduit for fiberoptic-guided advancement of an Aintree catheter (airway exchange catheter), and exchange of the SGA for an ETT. In this prospective randomized study, we compared two SGA devices in facilitating this exchange. Subjects were randomized to receive either the i-gel® or LMA® Supreme™ SGA. The SGA was placed and an Aintree intubation catheter was inserted through the SGA over a fiberoptic bronchoscope. Next, the SGA was removed, leaving the Aintree within the trachea, and an ETT was placed over the Aintree catheter and advanced into the trachea. The i-gel group exhibited shorter time to successful intubation (median, 191 vs. 434 seconds; P = .002). The i-gel group also had fewer study subjects requiring more than one attempt for successful Aintree placement (33% vs. 75%, P = .02). The i-gel group showed superior laryngeal view score (LVS) (6 vs. 4; P = .003). The i-gel SGA achieved a faster time to successful intubation, higher rate of first attempt Aintree placement, and superior LVS.

A randomised controlled trial to compare blind intubation success through LMA Blockbuster® and I-Gel® LMA.

INTRODUCTION: Laryngeal mask airway-blockbuster (LMA-BT) is a relatively new supraglottic airway device (SGAD). In this study, we compared LMA-BT with I-Gel LMA for efficacy of blind tracheal intubation. MATERIAL AND METHODS: We conducted a single-blind prospective study after ethical approval. One hundred American Society of Anesthesiology (ASA) Grade I-III (age 18-60 years) patients scheduled for elective surgery under general anaesthesia with endotracheal intubation were included and randomly divided into 2 groups. Blind tracheal intubation was performed through LMA-BT ( n = 50) and I-Gel ( n = 50) in groups 1 and 2, respectively. The primary aim was to evaluate the first pass success rate of blind tracheal intubation through the LMAs. The secondary objectives noted were attempts and ease of LMA insertion, total time taken for LMA insertion, airway seal pressure of LMA, ease of NGT insertion through LMA, fibre-optic grading of laryngeal view through LMA, overall success rate and time of intubation through LMA, time for LMA removal, and complications, if any. RESULTS: In the LMA-BT group, the first pass success rate ( P < 0.019) and the overall success rate of intubation ( P < 0.005) were significantly higher than in the I-Gel group. Using LMA-BT also resulted in statistically significant shorter intubation time ( P < 0.0001) with higher airway seal pressure as compared to I-Gel ( P < 0.001). The difference in the first attempt insertion, number of insertion attempts, ease and time of LMA insertion and removal after intubation, and postoperative complications were comparable among the groups. CONCLUSIONS: LMA-BT is a superior device as compared to I-Gel LMA as a conduit for blind tracheal intubation.

Efficacy of bougie first approach for endotracheal intubation with video laryngoscopy during continuous chest compression: a randomized crossover manikin trial.

BACKGROUND: Endotracheal intubation is challenging during cardiopulmonary resuscitation, and video laryngoscopy has showed benefits for this procedure. The aim of this study was to compare the effectiveness of various intubation approaches, including the bougie first, preloaded bougie, endotracheal tube (ETT) with stylet, and ETT without stylet, on first-attempt success using video laryngoscopy during chest compression. METHODS: This was a randomized crossover trial conducted in a general tertiary teaching hospital. We included anesthesia residents in postgraduate year one to three who passed the screening test. Each resident performed intubation with video laryngoscopy using the four approaches in a randomized sequence on an adult manikin during continuous chest compression. The primary outcome was the first-attempt success defined as starting ventilation within a one minute. RESULTS: A total of 260 endotracheal intubations conducted by 65 residents were randomized and analyzed with 65 procedures in each group. First-attempt success occurred in 64 (98.5%), 57 (87.7%), 56 (86.2%), and 46 (70.8%) intubations in the bougie-first, preloaded bougie, ETT with stylet, and ETT without stylet approaches, respectively. The bougie-first approach had a significantly higher possibility of first-attempt success than the preloaded bougie approach [risk ratio (RR) 8.00, 95% confidence interval (CI) 1.03 to 62.16, P = 0.047], the ETT with stylet approach (RR 9.00, 95% CI 1.17 to 69.02, P = 0.035), and the ETT without stylet approach (RR 19.00, 95% CI 2.62 to 137.79, P = 0.004) in the generalized estimating equation logistic model accounting for clustering of intubations operated by the same resident. In addition, the bougie first approach did not result in prolonged intubation or increased self-reported difficulty among the study participants. CONCLUSIONS: The bougie first approach with video laryngoscopy had the highest possibility of first-attempt success during chest compression. These results helped inform the intubation approach during CPR. However, further studies in an actual clinical environment are warranted to validate these findings. TRIAL REGISTRATION: Clinicaltrials.gov; identifier: NCT05689125; date: January 18, 2023.

A Simpler Method for Choosing Adult i-gel Size: An Evaluation of Real-World Prehospital Data.

OBJECTIVE: The i-gel supraglottic airway device (Intersurgical, Berkshire, UK) is commonly used in the United States and worldwide for prehospital airway management. Previous research has suggested that a sex-based method of size selection (4.0 for female patients and 5.0 for male patients) is superior to a weight-based method in patients undergoing elective anesthesia. Our objective was to compare a sex-based i-gel size selection strategy with a weight-based strategy using real-world prehospital data. METHODS: The ESO Data Collaborative 2018 to 2022 dataset was used. All initial i-gel insertion attempts in patients > 18 years of age were evaluated for inclusion. Insertion attempts were excluded if age, sex, weight, success, or device size was not documented. Logistic regression was used to compare the rate of insertion failure on the first attempt for the group placed in alignment with the weight-based but not sex-based method with the group placed in alignment with the sex-based but not weight-based method. RESULTS: After the application of the exclusion criteria, 39,867 initial i-gel insertion attempts were included. The overall rate of failure was 6.5% (2,585/39,867). The rate of unsuccessful i-gel placement was similar when i-gel devices were placed in alignment with a sex-based size selection method in comparison to i-gel placement in alignment with a weight-based selection strategy (6.0% vs. 6.4%). Logistic regression analysis did not reveal a significant difference between groups (odds ratio: 1.08; 95% confidence interval: 0.95-1.23). CONCLUSION: The use of a sex-based method of i-gel size selection may be equivalent with respect to the rate of unsuccessful i-gel placement on the first attempt in comparison to a weight-based method.

Effect of a 3D-printed reconstruction automated matching system for selecting the size of a left double-lumen tube: a study protocol for a prospective randomised controlled trial.

INTRODUCTION: Lung isolation is primarily accomplished using a double-lumen tube (DLT) or bronchial blocker. A precise and accurate size of the DLT is a prerequisite for ensuring its accurate placement. Three-dimensional (3D) reconstruction technology can be used to accurately reproduce tracheobronchial structures to improve the accuracy of DLT size selection. Therefore, we have developed automatic comparison software for 3D reconstruction based on CT data (3DRACS). In this study, we aimed to evaluate the efficiency of using 3DRACS to select the DLT size for endobronchial intubation in comparison with using the 'blind' DLT intubation method to determine the DLT size, which is based on height and sex. METHODS AND ANALYSIS: This is a prospective, single-centre, double-blind randomised controlled trial. In total, 200 patients scheduled for lung resection using a left DLT will be randomly allocated to the 3D group or the control group at a 1:1 ratio. A 3DRACS will be used for the 3D group to determine the size of the DLT, while in the case of the control group, the size of the DLT will be determined according to patient height and sex. The primary outcome is the success rate of placement of the left DLT without fibreoptic bronchoscopy (FOB). The secondary outcomes include the following: successful intubation time, degree of pulmonary atrophy, grade of airway injury, oxygenation during one-lung ventilation, postoperative sore throat and hoarseness, and number of times FOB is used. ETHICS AND DISSEMINATION: Ethical approval has been obtained from our local ethics committee (approval number: SCCHEC-02-2022-155). Written informed consent will be obtained from all participants before randomisation, providing them with clear instructions about the purpose of the study. The results will be disseminated through peer-reviewed publications and conferences. TRIAL REGISTRATION NUMBER: NCT06258954.

Individualized rotation of left double lumen endobronchial tube to improve placement success rate: a randomized controlled trial.

BACKGROUND: In conventional practice, the left double lumen tube (DLT) is rotated 90° counterclockwise when the endobronchial cuff passes glottis. Success rate upon the first attempt is < 80%, likely owing to varying morphology of the bronchial bifurcation. METHODS: We conducted a randomized controlled trial to compare 90° counterclockwise rotation versus individualized degree of rotation in adult patients undergoing elective thoracic surgery using left DLT. The degree of rotation in the individualized group was based on the angle of the left main bronchi as measured on computed tomography (CT). The primary outcome was the first attempt left DLT placement success rate. RESULTS: A total of 556 patients were enrolled: 276 in the control group and 280 in the individualized group. The average angle of the left main bronchi was 100.6±9.5° (range 72° to 119°). The first attempt left DLT placement success rate was 82.6% (228/276) in the control group versus 91.4% (256/280) in the individualized group (P=0.02, χ2 test). The rate of carina mucosal injury, as measured at 30 min after the start of surgery under fibreoptic bronchoscopy, was significantly lower in individualized group than control group (14.0% versus 19.6%, P=0.041). The individualized group also had lower rate of postoperative sore throat (29.4% versus 44.0%, P<0.001) and hoarseness (16.8% versus 24.7%, P＜0.05). CONCLUSIONS: Individualized rotation of left DLT based on the angle of the left main bronchi on preoperative CT increased first attempt success rate in adult patients undergoing elective thoracic surgery. TRIAL REGISTRATION: The trial is registered at Chinese Clinical Trial Registry (ChiCTR2100053349; principal investigator Xiang Quan, date of registration November 19, 2021).

Evaluation of a novel, low-cost, 3D printed video laryngoscope with borescope in anesthetized Beagle dogs.

OBJECTIVE: To develop and evaluate a low-cost three-dimensional (3D)-printed video laryngoscope (VLVET) for use with a commercial borescope. STUDY DESIGN: Instrument development and pilot study. ANIMALS: A total of six adult male Beagle dogs. METHODS: The VLVET consisted of a laryngoscope handle and a Miller-type blade, and a detachable camera holder that attached to various locations along the blade. The laryngoscope and camera holder were 3D-printed using black polylactic acid filament. Dogs were premedicated with intravenous (IV) medetomidine (15 µg kg-1) and anesthesia induced with IV alfaxalone (1.5 mg kg-1). The VLVET, combined with a borescope, was used for laryngeal visualization and intubation. Performance was evaluated by comparing direct and video-assisted views in sternal recumbency. The borescope camera was sequentially positioned at 2, 4, 6, 8 and 10 cm from the blade tip (distanceLARYNX-CAM), which was placed on the epiglottis during intubation or laryngoscopy. At the 10 cm distanceLARYNX-CAM, laryngeal visualization was sequentially scored at inter-incisor gaps of 10, 8, 6, 4 and 2 cm. Laryngeal visualization scores (0-3 range, with 0 = obstructed and 3 = unobstructed views) were statistically analyzed using the Friedman's test. RESULTS: Under direct visualization, the 2 cm distanceLARYNX-CAM had a significantly lower score compared with all other distanceLARYNX-CAM (all p = 0.014) because the view was obstructed by the camera holder and borescope camera. With both direct and camera-assisted views, visualization scores were higher at inter-incisor gaps ≥ 4 cm compared with 2 cm (all p < 0.05). CONCLUSIONS AND CLINICAL RELEVANCE: During laryngoscopy and intubation, the VLVET and borescope facilitated both direct and video laryngoscopy at distanceLARYNX-CAM in Beagle dogs when inter-incisor gaps were ≥ 4 cm.

Dynamic versus standard bougies for tracheal intubation with direct or indirect laryngoscopy in simulated or real scenarios: a systematic review and meta-analysis.

INTRODUCTION: This systematic review and meta-analysis aimed to compare the efficacy of dynamic versus standard bougies to achieve tracheal intubation. METHODS: We searched MEDLINE, Embase, CENTRAL, Web of Science, Scopus and Google Scholar on 10 October 2023. We included clinical trials comparing both devices. The primary outcome was the first-attempt intubation success rate. The secondary outcome was the time required for tracheal intubation. RESULTS: Eighteen studies were included. Dynamic bougies do not increase first-attempt success rate (RR 1.11; p = 0.06) or shorten tracheal intubation time (MD -0.30 sec; p = 0.84) in clinical trials in humans. In difficult airways, first-attempt success intubation rate was greater for dynamic bougies (RR 1.17; p = 0.002); Additionally, they reduced the time required for intubation (MD -4.80 sec; p = 0.001). First-attempt intubation success rate was higher (RR 1.15; p = 0.01) and time to achieve intubation was shorter when using Macintosh blades combined with dynamic bougies (MD -5.38 sec; p < 0.00001). Heterogeneity was high. CONCLUSION: Dynamic bougies do not increase the overall first-pass success rate or shorten tracheal intubation time. However, dynamic bougies seem to improve first-attempt tracheal intubation rate in patients with difficult airways and in those intubated with a Macintosh blade. Further research is needed for definitive conclusions. REGISTRATION OF PROSPERO: CRD42023472122.

A prospective, pragmatic non-inferiority study of emergency intubation success with the single-use i-view versus standard reusable video laryngoscope.

INTRODUCTION: Video laryngoscope (VL) technology improves first-pass success. The novel i-view VL device is inexpensive and disposable. We sought to determine the first-pass intubation success with the i-view VL device versus the standard reusable VL systems in routine use at each site. METHODS: We performed a prospective, pragmatic study at two major emergency departments (EDs) when VL was used. We rotated i-view versus reusable VL as the preferred device of the month based on an a priori schedule. An investigator-initiated interim analysis was performed. Our primary outcome was a first-pass success with a non-inferiority margin of 10% based on the per-protocol analysis. RESULTS: There were 93 intubations using the reusable VL devices and 81 intubations using the i-view. Our study was stopped early due to futility in reaching our predetermined non-inferiority margin. Operator and patient characteristics were similar between the two groups. The first-pass success rate for the i-view group was 69.1% compared to 84.3% for the reusable VL group. A non-inferiority analysis indicated that the difference (-15.1%) and corresponding 90% confidence limits (-25.3% to -5.0%) did not fall within the predetermined 10% non-inferiority margin. CONCLUSIONS: The i-view device failed to meet our predetermined non-inferiority margin when compared to the reusable VL systems with the study stopping early due to futility. Significant crossover occurred at the discretion of the intubating operator during the i-view month.

A case series of the Royal Perth Hospital cannula-first approach in the 'can't intubate, can't oxygenate' scenario.

At the Royal Perth Hospital, we have been developing and teaching a can't intubate, can't oxygenate (CICO) rescue algorithm for over 19 years, based on live animal simulation. The algorithm involves a 'cannula-first' approach, with jet oxygenation and progression to scalpel techniques if required in a stepwise fashion. There is little reported experience of this approach to the CICO scenario in humans. We present eight cases in which a cannula-first Royal Perth Hospital approach was successfully implemented during an airway crisis. We recommend that institutions teach and practice this approach; we believe it is effective, safe and minimally invasive when undertaken by clinicians who have been trained in it and have immediate access to the requisite equipment. The equipment is low cost, comprising a 14G Insyte cannula, saline, 5 ml syringe and a Rapid-O2. Training can be provided using low-fidelity manikins or part-task trainers.

The Effect of Laser-Resistant Endotracheal Tube Design on Airflow Dynamics: A Benchtop and Clinical Study.

OBJECTIVE: Compare ventilation pressures of 2 endotracheal tube designs used in laser airway surgery in clinical practice and with a benchtop model to elucidate differences and understand the design elements that impact airflow dynamics. METHODS: Ventilatory and aerodynamic characteristics of the laser resistant stainless-steel endotracheal tube (LRSS-ET) design and the laser resistant aluminum-wrapped silicone endotracheal tube (LRAS-ET) design were compared. Ventilatory parameters were collected for 32 patients undergoing laser-assisted airway surgery through retrospective chart review. An in vitro benchtop simulation measured average resistance and centerline turbulence intensity of both designs at various diameters and physiological frequencies. RESULTS: Baseline patient characteristics did not differ between the 2 groups. Clinically, the median LRAS-ET peak inspiratory pressure (PIP; 21.00 cm H2O) was significantly decreased compared to LRSS-ET PIP (34.67 cm H2O). In benchtop simulation, the average PIP of the LRAS-ET was significantly lower at all sizes and frequencies. The LRSS-ET consistently demonstrated an increased resistance, although no patterns were observed in turbulence intensity data between both designs. CONCLUSION: The benchtop model demonstrated increased resistance in the LRSS-ET compared to the LRAS-ET at all comparable sizes. This finding is supported by retrospective ventilatory pressures during laser airway surgery, which show significantly increased PIPs when comparing identically sized inner diameters. Given the equivocal turbulence intensity data, these differences in resistance and pressures are likely caused by wall roughness and intraluminal presence of tubing, not inlet or outlet geometries. The decreased PIPs of the LRAS-ET should assist in following lung protective ventilator management strategies and reduce risk of pulmonary injury and hemodynamic instability to the patient.

Soft tissue injury events associated with neural integrity monitoring endotracheal tubes: A MAUDE database analysis.

OBJECTIVE: Neural integrity monitoring (NIM) endotracheal tubes are widely used to provide intraoperative monitoring of the recurrent laryngeal nerve during certain neck surgeries, especially thyroidectomy, in order to reduce the risk of nerve injury and subsequent vocal fold paralysis. The unique design of NIM tubes and the increased technical skill required for correct placement compared to standard endotracheal tubes may increase the risk of upper aerodigestive tract soft tissue injury. This study aims to describe adverse events related to NIM endotracheal tubes. STUDY DESIGN: Retrospective cross-sectional study. SETTING: The US Food and Drug Administration's MAUDE database (2010-2022); (Manufacturer and User Facility Device Experience). METHODS: The MAUDE database was queried for reports of adverse events that resulted in patient soft tissue injury involving the use of endotracheal tubes approved by the Food and Drug Administration. RESULTS: There were 28 reported soft tissue injuries, with all events being related to the NIM EMG family of endotracheal tubes manufactured by Medtronic Xomed, Inc. Overall, 24 were categorized as device-related adverse events, and 4 were unspecified in the event description. The most common soft tissue injuries were edema (n = 7) and perforation (n = 7), each accounting for 25 % of adverse events. The second most common injury type was laceration (n = 4), representing 14 % of all adverse events. Overall, 9 patients (32 %) in our cohort required a surgical intervention to treat their injuries, which consisted of 6 tracheotomies and 3 instances of suture repair. CONCLUSIONS: The most commonly reported types of soft tissue injury included edema and perforation, followed by laceration. Increased awareness of device-related patient injuries associated with NIM endotracheal tubes can be used to better inform surgeons and anesthesiologists during the process of intubation and surgical decision-making.

Development of an Improved LASER-Resistant Endotracheal Tube.

OBJECTIVES: Surgical fires, particularly within Otolaryngology, remain a surprisingly frequent and devastating complication of laser-related surgery in the oropharynx and airway; Current estimates suggest anywhere from 200 to 600 surgical fires per year in the United States, with 20%-30% of these occurring as a complication of laser surgery and 90%-95% of these occurring in the head and neck region. Unfortunately, the complications of laser surgery in the airway may include respiratory failure, airway burns with stenosis, and may result in mortality. The most commonly utilized endotracheal tube for protection against inadvertent laser strikes, the Laser-Shield II tube (Medtronic), was removed from the commercial marketplace in 2016 after cases of airway fires were reported as a result of feature deficiencies in the product (FDA MAUDE Database review). Since the demise of the Laser-Shield II tube, alternatives such as the Mallinckrodt laser tube and handmade reinforced tubes have been utilized, although shortcomings in design and features have made these options less appealing to practicing Otolaryngologists. Creating a laser-safe endotracheal tube is critical for safe upper airway surgery. This paper evaluates new technologies, materials, and technical innovations in endotracheal tubes that may advance patient safety in laser-assisted Otolaryngology procedures. STUDY TYPE: This paper evaluates new technologies, materials, and technical innovations in endotracheal tubes that may advance patient safety in laser-assisted Otolaryngology procedures. METHODS: First, this article reviews the background of laser surgery in Otolaryngology and the consequent risk of surgical fire with resultant development of laser-resistant endotracheal tubes and commercial availability. Next, a review of claims and national database review of product failures related to previous laser-resistant endotracheal tubes is performed through the FDA MAUDE database. This includes an evaluation of cases: review of techniques in laser airway surgery including spontaneous ventilation, decreased O2 concentration, currently available endotracheal tubes including "handmade" fixes for perceived safety risks, and determination of failure points for previous laser-resistant endotracheal tubes. Third, the paper reviews the requested features of an "ideal" laser-resistant endotracheal tube. Finally, the paper reviews failure testing from an initial, unsuccessful attempt at material development and the consequent development of alternative technologies that address failure points from previous endotracheal tubes and addresses requested features with a detailed analysis of FDA-approval required testing. Extensive lab testing of the new tube predicts a significant reduction of risk in vivo with inability to perforate the shaft or cuff of the tubes under standard working conditions. RESULTS: While no iteration of a laser-resistant endotracheal tube is entirely laser safe, advances in technology can improve the safety profile of these devices. The new tube contains a double cuff, a soft and flexible shaft to minimize laryngeal insertion trauma, a smooth external surface, a tight-to-shaft balloon, and methylene blue dye in the cuff to alert the user to inadvertent penetration. These characteristics were the most requested by laryngologists in the development of a new laser-resistant tube. The newest endotracheal tube brings the features most requested by Otolaryngologists in a laser-resistant tube, and improves the safety profile over previous tubes. CONCLUSION: Development of a new endotracheal tube represents an advancement in safety for the Otolaryngologist in laser airway surgery. Understanding the previous history and the science behind surgical fire formation is essential in advancing safety for patients in the future. LEVEL OF EVIDENCE: N/A Laryngoscope, 134:S1-S12, 2024.