Freeze-induced acceleration of iodide oxidation and consequent iodination of dissolved organic matter to form organoiodine compounds.

Freeze-induced acceleration of I- oxidation and the consequent iodination of dissolved organic matter (DOM) contribute to the formation of organoiodine compounds (OICs) in cold regions. The formed OICs may be a potentially important source of risk and are very closely with the environment and human health. Herein, we investigated the acceleration effects of the freeze process on I- oxidation and the formation of OICs. In comparison to reactive iodine species (RIS) formed in aqueous solutions, I- oxidation and RIS formation were greatly enhanced in frozen solution and were affected by pH, and the content of I- and O2. Freeze-thaw process further promoted I- oxidation and the concentration of RIS reached 45.7 µmol/L after 6 freeze-thaw cycles. The consequent products of DOM iodination were greatly promoted in terms of both concentration and number. The total content of OICs ranged from 0.02 to 2.83 µmol/L under various conditions. About 183-1197 OICs were detected by Fourier transform ion cyclotron resonance mass spectrometry, and more than 96.2% contained one or two iodine atoms. Most OICs had aromatic structures and were formed via substitution and addition reactions. Our findings reveal an important formation pathway for OICs and shed light on the biogeochemical cycling of iodine in the natural aquatic environment.

Elevated levels of iodide promote peroxidase-mediated protein iodination and inhibit protein chlorination.

At inflammatory sites, immune cells generate oxidants including H2O2. Myeloperoxidase (MPO), released by activated leukocytes employs H2O2 and halide/pseudohalides to form hypohalous acids that mediate pathogen killing. Hypochlorous acid (HOCl) is a major species formed. Excessive or misplaced HOCl formation damages host tissues with this linked to multiple inflammatory diseases. Previously (Redox Biology, 2020, 28, 101331) we reported that iodide (I⁻) modulates MPO-mediated protein damage by decreasing HOCl generation with concomitant hypoiodous acid (HOI) formation. HOI may however impact on protein structure, so in this study we examined whether and how HOI, from peroxidase/H2O2/I⁻ systems ± Cl⁻, modifies proteins. Experiments employed MPO and lactoperoxidase (LPO) and multiple proteins (serum albumins, anastellin), with both chemical (intact protein and peptide mass mapping, LC-MS) and structural (SDS-PAGE) changes assessed. LC-MS analyses revealed dose-dependent iodination of anastellin and albumins by LPO/H2O2 with increasing I⁻. Incubation of BSA with MPO/H2O2/Cl⁻ revealed modest chlorination (Tyr286, Tyr475, ∼4 %) and Met modification. Lower levels of these species, and extensive iodination at specific Tyr and His residues (>20 % modification with ≥10 µM I⁻) were detected with increasing I⁻. Anastellin dimerization was inhibited by increasing I⁻, but less marked changes were observed with albumins. These data confirm that I⁻ competes with Cl⁻ for MPO and is an efficient HOCl scavenger. These processes decrease protein chlorination and oxidation, but result in extensive iodination. This is consistent with published data on the presence of iodinated Tyr on neutrophil proteins. The biological implications of protein iodination relative to chlorination require further clarification.

Unexpected Formation of 11(9→7)-abeo-Steroid Skeleton in Synthetic Studies toward Batrachotoxin.

Batrachotoxin (1) is a potent cardio- and neurotoxic steroid isolated from certain species of frogs, birds, and beetles. We previously disclosed two synthetic routes to 1. During our synthetic studies toward 1, we explored an alternative strategy for efficiently assembling its 6/6/6/5-membered steroidal skeleton (ABCD-ring). Here we report the application of intermolecular Weix and intramolecular pinacol coupling reactions. While Pd/Ni-promoted Weix coupling linked the AB-ring and D-ring fragments, SmI2-mediated pinacol coupling did not cyclize the C-ring. Instead, we discovered that SmI2 promoted a 1,4-addition of the α-alkoxy radical intermediate to produce the unusual 11(9→7)-abeo-steroid skeleton. Thus, this study demonstrates the convergent assembly of the skeleton of the natural product matsutakone in 11 steps from 2-allyl-3-hydroxycyclopent-2-en-1-one.

Gold leaf electrochemical flow cell for determination of iodide in nuclear emergency tablets.

This work introduces an innovative gold-leaf flow cell for electrochemical detection in flow injection (FI) analysis. The flow cell incorporates a hammered custom gold leaf electrochemical sensor. Hammered gold leaves consist of pure gold and are readily available in Thailand at affordable prices (approximately $0.085 for a sheet measuring 40 mm × 40 mm). Four sensing devices can be made from a single sheet of this gold leaf, resulting in a production cost of approximately $0.19 per sensor. Each electrochemical sensor has the gold leaf as the working electrode, together with a printed carbon strip, and a printed silver/silver chloride strip as the counter and reference electrodes, respectively. Initial investigations using cyclic voltammetry of a standard 1000 µmol L⁻1 iodide solution in 60 mmol L⁻1 phosphate buffer (PB) solution at pH 5, demonstrated performance comparable to that of a commercial screen-printed gold electrode. The hammered gold leaf electrode was then installed in a commercial flow cell as part of an FI system. A sample or standard iodide solution (100 µL) is injected into the first carrier stream of phosphate buffer (PB) solution, which then merges to mix with the second stream of the same buffer solution before flowing into the flow cell for amperometric detection of iodide. The optimized operating conditions include a fixed potential of +0.39 V (vs Ag/AgCl), and a total flow rate of 3 mL min⁻1. A linear calibration is obtained in the concentration range of 1 to 1000 µmol L⁻1 I- with a typical equation of µA = (0.00299 ± 0.00004) × (µmol L-1 I-) + (0.021 ± 0.020), and R2 = 0.9994. Analysis of iodide using this gold leaf-FI system is rapid with sample throughput of 86 samples h⁻1 and %RSD of a sample of 100 µmol L⁻1 I⁻ of 1.2 (n = 29). The limit of detection, (calculated as 2.78 × SD of regression line/slope), is 27 µmol L⁻1 I-. This method was successfully applied to determine iodide in nuclear emergency tablets.

Behavior change intervention to sustain iodide salt utilization in households in Ethiopia and study of the effect of iodine status on the growth of young children: community trial.

Background: Monitoring systems in a broad range of countries are a notable effort to eliminate iodine deficiency disorders (IDDs). This study aimed to gather data on the amount of iodide present in table salt and how household consumption patterns affect children's iodine status and its effect on their growth. Methods: A single treatment arm community trial study design was designed. Lower community units (LCUs) were chosen at random from districts assigned either intervention or control. From a list of LCUs, 834 mothers and their paired children were chosen randomly. Urine and table salt samples were collected and examined in the national food and nutrition laboratory. The deference between arms was determined using a t test, and the generalized estimating equation (GEE) was used to forecast parameters. Results: The mean iodide content in the table salt samples of 164 (98.1%) was 45.3 ppm and a standard deviation (SD) of 14.87, which were above or equal to the recommended parts per million (ppm). Between the baseline survey and the end-line survey, the mean urine iodine concentration (UIC) was 107.7 µg/L (+/- 8.64 SD) and 260.9 µg/L (+/- 149 SD). Children's urine iodine excretion (UIE) had inadequate iodine in 127 (15.2%) children at the beginning of the study, but only 11 (2.6%) of the intervention group still had inadequate iodine at the end. The childrens' mean height (Ht) was 83.1 cm (+/-10 SD) at baseline and 136.4 cm (+/-14 SD) at the end of the survey. Mothers knew a lot (72%) about adding iodized salt to food at the end of cooking, and 183 (21.9%) of them did so regularly and purposefully. A total of 40.5% of children in the intervention group had stunted growth at baseline, which decreased to 15.1% at the end of the study but increased in the control group to 51.1%. The mean difference (MD) of urine iodine concentration (UIC) between intervention and control groups was 97.56 µg/L, with a standard error (SE) of 9.83 (p = 0.001). The end-line Ht of children in the intervention group was increased by 7.93 cm (ß = 7.93, p = 0.005) compared to the control group. Conclusions: Our research has shown that mothers who embraced healthy eating habits had perceived improvements in both the iodine status and height growth of their children. In addition to managing and using iodine salt, it has also introduced options for other healthy eating habits that will also play a significant role in their children's future development. This sort of knowledge transfer intervention is essential for the sustainability of society's health. Therefore, this trial's implications revealed that the intervention group's iodine status and growth could essentially be improved while the control group continued to experience negative effects. Trial registration: ClinicalTrials.gov Identifier: NCT048460 1.

Iodine enrichment in the groundwater in South China and its hydrogeochemical control.

In North China, iodine-rich groundwater has been extensively studied, but few in South China. This study aimed to investigate the characteristics of iodine-rich groundwater in South China and identify potential contamination sources. The results revealed that the average concentration of iodine in groundwater was 890 µg/L, with a maximum concentration of 6350 µg/L, exceeding the permitted levels recommended by the World Health Organization (5-300 µg/L). Notably, the enrichment of iodide occurred in acidic conditions (pH = 6.6) and a relatively low Eh environment (Eh = 198.4 mV). Pearson correlation and cluster analyses suggested that the enrichment of iodide could be attributed to the intensified redox process involving Mn(II), iodine (I2), or iodate (IO3-) in the soil. The strong affinity between Mn(II) and I2/IO3- facilitated their interaction, resulting in the formation and mobilization of I- from the soil to the groundwater. Leaching experiments further confirmed that reducing substances (such as sodium sulfides, ascorbic acids, and fulvic acids) in the soil with low dissolved oxygen (DO) levels (< 1.0 mg/L) enhanced the dissolution of iodine species. Conversely, higher DO content (> 3.8 mg/L) promoted the oxidation of I- into I2 or IO3-, leading to its stabilization. This research provides new insights into the characteristics and mechanisms of I- enrichment in groundwater in South China, and emphasizes the significance of the redox reactions involving Mn(II) and I2/IO3-, as well as the influence of soil properties in regulating the occurrence and transportation of iodine species within groundwater systems.

A simple fluorescence detection of acetylcholinesterase with peroxidase-like catalysis from iodide.

Acetylcholinesterase (AChE) is an important enzyme in the central and peripheral nervous system that regulates the balance of the neurotransmitter acetylcholine. In this work, a simple, selective and sensitive fluorescence assay was developed toward AChE activity. A conventional AChE substrate acetylthiocholine iodide (ATCI) was applied. Instead directly rendering a signaling, it was found that free iodide ions was released during the enzymatic hydrolysis of ATCI. These ions further catalyzed the oxidation of non-emissive o-phenylenediamine (OPD) into a fluorescent product. This gave a response differed from frequently-adopted sulfhydryl- -based signals and thus minimized related interferences. All materials included in this process were directly available and no additional syntheses were required. Due to the extra iodide-based catalysis included, this scheme was capable of providing a sensitive response toward AChE in the range of 0.01-8 U/L, with a limit of detection at 0.006 U/L. This method was further extended onto chlorpyrifos as an exemplary AChE inhibitor, with a detection down to 3 pM.

Efficacy of endoscopic surveillance for pharyngeal mucosa during endoscopic resection for pharyngeal carcinoma: a multicenter prospective study.

INTRODUCTION: Since patients with pharyngeal squamous cell carcinoma (SCC) often have multiple pharyngeal lesions, evaluation of pharyngeal lesions before endoscopic resection (ER) is important. However, detailed endoscopic observation of the entire pharyngeal mucosa under conscious sedation is difficult. We examined the usefulness of endoscopic surveillance with narrow band imaging (NBI) and lugol staining for detection of pharyngeal sublesions during ER for pharyngeal SCC under general anesthesia (endoscopic surveillance during treatment; ESDT). METHODS: From January 2021 through June 2022, we examined 78 patients who were diagnosed with superficial pharyngeal SCC and underwent ER. They underwent the ESDT and for patients who were diagnosed with new lesions of pharyngeal SCC or high-grade dysplasia (HGD) that were not detected in the endoscopic examination before treatment, ER were performed simultaneously for new lesions and the main lesions. The primary endpoint of this study was the detection rate of new lesions of pharyngeal SCC or HGD in the ESDT. RESULTS: Fifteen of the 78 patients were diagnosed as having undetected new pharyngeal lesions in the ESDT and 10 (12.8%) (95% CI 6.9-22.2%) were histopathologically confirmed to have new lesions of pharyngeal SCC or HGD. Among the 13 lesions of SCC or HGD, 8 were found by NBI observation; however, 5 were undetectable using NBI but detectable by lugol staining. All of the 13 lesions had endoscopic findings of pink color sign on lugol staining. CONCLUSIONS: Endoscopic surveillance for pharyngeal sublesions during ER for pharyngeal SCC is feasible and useful.

Sodium iodide symporter immunolabelling as a predictor of clinical iodide uptake in canine thyroid carcinoma: A preliminary study.

Thyroid follicular tumours may take up iodide via the sodium-iodide symporter. Knowledge of iodide uptake could then allow treatment with I-131 in dogs with high-risk tumours. The objective of this study was to determine the relationship between clinically detectable iodide uptake (as determined by scintigraphy and/or thyroxine concentrations) and sodium iodide symporter immunohistochemical labelling on histologically fixed thyroid tumours. Nineteen dogs were identified who were diagnosed with thyroid carcinoma and underwent surgery from November 2017 to July 2021. All had recorded thyroid hormone concentrations and were hyperthyroid and/or underwent preoperative nuclear imaging using planar scintigraphy (technetium-99m or I-123), or I-124 PET-CT. All dogs subsequently underwent surgery to remove the thyroid mass. Twenty-two tumours were submitted for histopathologic analysis immediately following surgery, which confirmed a diagnosis of thyroid carcinoma for each tumour. Images and/or thyroid hormone concentrations were reviewed for the included cases, and tumours were sorted into an avid/functional group (group 1) and a non-avid/functional group (group 2). The tumour tissues were re-examined histologically using sodium iodide symporter (NIS) immunohistochemistry (IHC). Group 1 contained 15 avid/functional tumours. Twelve of these tumours had membranous NIS IHC labelling. Group 2 contained 7 non-avid tumours. One of these tumours had membranous NIS IHC labelling. This resulted in an overall sensitivity and specificity for identification of avid/functional tumours with membranous NIS of 80.0% and 85.7%, respectively. NIS IHC may predict ion trapping in canine follicular thyroid tumours. Further studies using iodide-based imaging are warranted to better determine the clinical utility of this diagnostic modality.

Near-Infrared Light-Excited Quinolinium-Carbazole Small Molecule as Two-Photon Fluorescence Nucleic Acid Probe.

This article reports three new two-photon absorption (TPA) materials that are quinolinium-carbazole derivates. They are 3-(N-methyl-4-ethylquinolinium iodide)-9-ethylcarbazole (M4), 3-(N-methyl-4-ethylquinolinium iodide)-9-ethylcarbazole (H2), and 3-(N-methyl-4-ethylquinolinium iodide)-9-ethylcarbazole (H4). Their TPA cross-sections are 491, 515, and 512 GM, respectively. Under the excitation of near-infrared light, their fluorescence emission is about 650 nm. The compounds can stain nucleic acid DNA with the same level of nuclear localization as Hoechst 33342. Under continuous irradiation with a near-infrared laser, the three new compounds showed less fluorescence decay than DAPI, and the average fluorescence decay rates were 0.016%/s, 0.020%/s, and 0.023%/s. They are expected to become new two-photon fluorescent probes of nucleic acid DNA because of their excellent performance.

Sodium-iodide symporter and its related solute carriers in thyroid cancer.

The solute carrier (SLC) family is a large group of membrane transport proteins. Their dysfunction plays an important role in the pathogenesis of thyroid cancer. The most well-known SLC is the sodium-iodide symporter (NIS), also known as sodium/iodide co-transporter or solute carrier family 5 member 5 (SLC5A5) in thyroid cancer. The dysregulation of NIS in thyroid cancer is well documented. The role of NIS in the uptake of iodide is critical in the treatment of thyroid cancer, radioactive iodide (RAI) therapy in particular. In addition to NIS, other SLC members may affect the autophagy, proliferation, and apoptosis of thyroid cancer cells, indicating that an alteration in SLC members may affect different cellular events in the evolution of thyroid cancer. The expression of the SLC members may impact the uptake of chemicals by the thyroid, suggesting that targeting SLC members may be a promising therapeutic strategy in thyroid cancer.

Spontaneous Appearance of Triiodide Covering the Topmost Layer of the Iodide Solution Interface Without Photo-Oxidation.

Ions containing iodine atoms at the vapor-aqueous solution interfaces critically affect aerosol growth and atmospheric chemistry due to their complex chemical nature and multivalency. While the surface propensity of iodide ions has been intensely discussed in the context of the Hofmeister series, the stability of various ions containing iodine atoms at the vapor-water interface has been debated. Here, we combine surface-specific sum-frequency generation (SFG) vibrational spectroscopy with ab initio molecular dynamics simulations to examine the extent to which iodide ions cover the aqueous surface. The SFG probe of the free O-D stretch mode of heavy water indicates that the free O-D group density decreases drastically at the interface when the bulk NaI concentration exceeds ∼2 M. The decrease in the free O-D group density is attributed to the spontaneous appearance of triiodide that covers the topmost interface rather than to the surface adsorption of iodide. This finding demonstrates that iodide is not surface-active, yet the highly surface-active triiodide is generated spontaneously at the water-air interface, even under dark and oxygen-free conditions. Our study provides an important first step toward clarifying iodine chemistry and pathways for aerosol formation.

Iodide and sulfite synergistically accelerate the photo-reduction and recovery of As(V) and As(III) in sulfite/iodide/UV process: Efficiency and mechanism.

Photo-reduction of arsenic (As) by hydrated electron (eaq-) and recovery of elemental arsenic (As(0)) is a promising pathway to treat As-bearing wastewater. However, previously reported sulfite/UV system needs large amounts of sulfite as the source of eaq-. This work suggests a sulfite/iodide/UV approach that is more efficient and consumes much less chemical reagents to remove As(III) and As(V) and recover valuable As(0) from wastewater, hence preventing the production of large amounts of As-containing hazardous wastes. Our results showed that more than 99.9% of As in the aqueous phase was reduced to highly pure solid As(0) (>99.5 wt%) by sulfite/iodide/UV process under alkaline conditions. Sulfite and iodide worked synergistically to enhance reductive removal of As. Compared with sulfite/UV, the addition of iodide had a substantially greater effect on As(III) (over 200 times) and As(V) (approximately 30 times) removals because of its higher absorptivity and quantum yield of eaq-. Furthermore, more than 90% of the sulfite consumption was decreased by adding a small amount of iodide while maintaining similar reduction efficiency. Hydrated electron (eaq-) was mainly responsible for As(III) and As(V) reductions and removals under alkaline conditions, while both SO3•- and reactive iodine species (e.g., I•, I2, I2•-, and I3-) may oxidize As(0) to As(III) or As(V). Acidic circumstances caused sulfite protonation and the scavenging of eaq- by competing processes. Dissolved oxygen (O2) and CO32- prevented As reduction by light blocking or eaq- scavenging actions, but Cl-, Ca2+, and Mg2+ showed negligible impacts. This study presented an efficient method for removing and recovering As from wastewater.

The investigation of cytotoxic and apoptotic activity of Cl-amidine on the human U-87 MG glioma cell line.

BACKGROUND: Peptidyl (protein) arginine deiminases (PADs) provide the transformation of peptidyl arginine to peptidyl citrulline in the presence of calcium with posttranslational modification. The dysregulated PAD activity plays an important role on too many diseases including also the cancer. In this study, it has been aimed to determine the potential cytotoxic and apoptotic activity of chlorine-amidine (Cl-amidine) which is a PAD inhibitor and whose effectiveness has been shown in vitro and in vivo studies recently on human glioblastoma cell line Uppsala 87 malignant glioma (U-87 MG) forming an in vitro model for the glioblastoma multiforme (GBM) which is the most aggressive and has the highest mortality among the brain tumors. METHODS: In the study, the antiproliferative and apoptotic effects of Cl-amidine on GBM cancer model were investigated. The antiproliferative effects of Cl-amidine on U-87 MG cells were determined by 4-[3-(4-iodophenyl)-2-(4-nitrophenyl)-2H-5-tetrazolio]-1,3-benzene disulfonate method at the 24th and 48th hours. The apoptotic effects were analyzed by Annexin V and Propidium iodide staining, caspase-3 activation, and mitochondrial membrane polarization (5,5', 6,6'-tetrachloro-1,1', 3,3' tetraethyl benzimidazolyl carbocyanine iodide) methods in the flow cytometry. RESULTS: It has been determined that Cl-amidine exhibits notable antiproliferative properties on U-87 MG cell line in a time and concentration-dependent manner, as determined through the 4-[3-(4-iodophenyl)-2-(4-nitrophenyl)-2H-5-tetrazolio]-1,3-benzene disulfonate assay. Assessment of apoptotic effects via Annexin V and Propidium iodide staining and 5,5', 6,6'-tetrachloro-1,1', 3,3' tetraethyl benzimidazolyl carbocyanine iodide methods has revealed significant efficacy, particularly following a 24-hour exposure period. It has been observed that Cl-amidine induces apoptosis in cells by enhancing mitochondrial depolarization, independently of caspase-3 activation. Furthermore, regarding its impact on healthy cells, it has been demonstrated that Cl-amidine shows lower cytotoxic effects when compared to carmustine, an important therapeutic agent for glioblastoma. CONCLUSION: The findings of this study have shown that Cl-amidine exhibits significant potential as an anticancer agent in the treatment of GBM. This conclusion is based on its noteworthy antiproliferative and apoptotic effects observed in U-87 MG cells, as well as its reduced cytotoxicity toward healthy cells in comparison to existing treatments. We propose that the antineoplastic properties of Cl-amidine should be further investigated through a broader spectrum of cancer cell types. Moreover, we believe that investigating the synergistic interactions of Cl-amidine with single or combination therapies holds promise for the discovery of novel anticancer agents.

Oxidation processes and me.

This publication summarizes my journey in the field of chemical oxidation processes for water treatment over the last 30+ years. Initially, the efficiency of the application of chemical oxidants for micropollutant abatement was assessed by the abatement of the target compounds only. This is controlled by reaction kinetics and therefore, second-order rate constant for these reactions are the pre-requisite to assess the efficiency and feasibility of such processes. Due to the tremendous efforts in this area, we currently have a good experimental data base for second-order rate constants for many chemical oxidants, including radicals. Based on this, predictions can be made for compounds without experimental data with Quantitative Structure Activity Relationships with Hammet/Taft constants or energies of highest occupied molecular orbitals from quantum chemical computations. Chemical oxidation in water treatment has to be economically feasible and therefore, the extent of transformation of micropollutants is often limited and mineralization of target compounds cannot be achieved under realistic conditions. The formation of transformation products from the reactions of the target compounds with chemical oxidants is inherent to oxidation processes and the following questions have evolved over the years: Are the formed transformation products biologically less active than the target compounds? Is there a new toxicity associated with transformation products? Are transformation products more biodegradable than the corresponding target compounds? In addition to the positive effects on water quality related to abatement of micropollutants, chemical oxidants react mainly with water matrix components such as the dissolved organic matter (DOM), bromide and iodide. As a matter of fact, the fraction of oxidants consumed by the DOM is typically > 99%, which makes such processes inherently inefficient. The consequences are loss of oxidation capacity and the formation of organic and inorganic disinfection byproducts also involving bromide and iodide, which can be oxidized to reactive bromine and iodine with their ensuing reactions with DOM. Overall, it has turned out in the last three decades, that chemical oxidation processes are complex to understand and to manage. However, the tremendous research efforts have led to a good understanding of the underlying processes and allow a widespread and optimized application of such processes in water treatment practice such as drinking water, municipal and industrial wastewater and water reuse systems.

Microfluidic Paper-Based Device Incorporated with Silica Nanoparticles for Iodide Quantification in Marine Source Dietary Supplements.

Iodine is an essential micronutrient for humans due to its fundamental role in the biosynthesis of thyroid hormones. As a key parameter to assess health conditions, iodine intake needs to be monitored to ascertain and prevent iodine deficiency. Iodine is available from various food sources (such as seaweed, fish, and seafood, among others) and dietary supplements (multivitamins or mineral supplements). In this work, a microfluidic paper-based analytical device (µPAD) to quantify iodide in seaweed and dietary supplements is described. The developed µPAD is a small microfluidic device that emerges as quite relevant in terms of its analytical capacity. The quantification of iodide is based on the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by hydrogen peroxide in the presence of iodine, which acts as the catalyst to produce the blue form of TMB. Additionally, powder silica was used to intensify and uniformize the colour of the obtained product. Following optimization, the developed µPAD enabled iodide quantification within the range of 10-100 µM, with a detection limit of 3 µM, and was successfully applied to seaweeds and dietary supplements. The device represents a valuable tool for point-of-care analysis, can be used by untrained personnel at home, and is easily disposable, low-cost, and user-friendly.

Analytical methods for selectively determining hydrogen peroxide, peroxymonosulfate and peroxydisulfate in their binary mixtures.

Hydrogen peroxide (H2O2), peroxymonosulfate (PMS), and peroxydisulfate (PDS) are key bulk oxidants in many advanced oxidation processes (AOPs) for treating chemically contaminated water. In some systems these peroxides may coexist in solution either through intentional co-addition or their inadvertent formation (especially H2O2) due to reaction chemistry. While many analytical methods to determine these peroxides individually have been established, mutual interference among the peroxides in such methods has seldom been evaluated, and new methods or variants of established methods to selectively determine peroxides in binary mixtures are lacking. We re-examined five established colorimetric methods-the Permanganate, Titanium Oxalate (Ti-oxalate), Iodide, N.N­diethyl-p-phenylenediamine (DPD), and 2,20-azino-bis(3-ethylbenzothiazoline-6-sulfonate (ABTS) methods-for mutual interference among peroxides and devised variants of these methods for selectively quantifying one peroxide in the presence of another. Hydrogen peroxide can be selectively determined by the Permanganate method at short reaction time; by the Ti-oxalate method; by the DPD method with added peroxidase (POD); or by the ABTS method with added POD. PMS can be selectively determined by the Iodide method; by the DPD or ABTS methods with added iodide ion as catalyst; or by the DPD method with added catalase (CAT) (with co-existing H2O2 but not PDS). The DPD method can be used to determine PDS without interference by H2O2 and-provided the sample is pretreated with l-histidine-without interference by PMS. The recommended methods were successfully applied to binary peroxide mixtures in complex waters, including a tap water and a synthetic water. Overall, the new selective methods will assist mechanistic investigation of AOPs based on these peroxides and support efforts to apply them commercially.

Salivary iodide status as a measure of whole body iodine homoeostasis?

Iodine is a trace element required to produce the thyroid hormones, which are critical for development, growth and metabolism. To ensure appropriate population iodine nutrition, convenient and accurate methods of monitoring are necessary. Current methods for determining iodine status either involve a significant participant burden or are subject to considerable intra-individual variation. The continuous secretion of iodide in saliva potentially permits its use as a convenient, non-invasive assessment of status in populations. To assess its likely effectiveness, we reviewed studies analysing the association between salivary iodide concentration (SIC) and dietary iodine intake, urinary iodide concentration (UIC) and/or 24-h urinary iodide excretion (UIE). Eight studies conducted in different countries met the inclusion criteria, including data for 921 subjects: 702 healthy participants and 219 with health conditions. SIC correlated positively with UIC and/or UIE in four studies, with the strength of relationship ranging from r = 0·19 to r = 0·90 depending on sampling protocol, age, and if salivary values were corrected for protein concentration. Additionally, SIC positively correlated with dietary intake, being strongest when saliva was collected after dinner. SIC varied with external factors, including thyroid function, use of some medications, smoking and overall health status. Evidence provided here supports the use of SIC as a viable, low-burden method for determining iodine status in populations. However, small sample sizes and high variability indicates the need for more extensive analyses across age groups, ethnicities, disease states and dietary groups to clarify the relative accuracy and reliability in each case and standardise procedure.

A dual-mode assay kit using a portable potentiostat connected to a smartphone via Bluetooth communication and a potential-power angle-based paper device susceptible for low-cost point-of-care testing of iodide and dopamine.

BACKGROUND: Considering that the brain controls most of the body's activities, it is very important to measure the factors affecting its function, such as dopamine and iodide. Due to the growing population in the world, it is necessary to provide fast, cheap and accurate methods with the capability of on-site analysis and without the need for invasive sampling and operator skill. As a result, there is a strong desire to replace laboratory instruments with small sensors for point-of-care testing. Paper-based analytical devices (PADs) are one of the popular zero-cost approaches to achieve this goal. RESULTS: We developed a simple and disposable diagnostic paper system based on electroanalytical and potential-power angle-based methods. First, we prepared an angle-based analytical system capable of performing semi-quantitative iodide analysis simply by reading the colored angle traveled. This system design is based on a channel containing complex reagents and two pencil-drawn electrodes to apply a constant voltage accelerating the anions migration. Meanwhile, a three-electrode system based on conductive pencil graphite is developed to measure dopamine concentration based on linear sweep voltammetry. For the quantitative analysis, the voltammetric data was wirelessly transmitted to a mobile device via Bluetooth communication. In this context, a power supply providing the required voltage for the migration of iodide ions, a portable potentiostat system, and a mobile application for measuring dopamine were developed. The calibration curves for I- and dopamine range from 3.5 × 10-4-47.0 × 10-4 and 10.0 × 10-6-1000.0 × 10-6 mol L-1 with LODs of 2.3 × 10-4 and 5.0 × 10-6 mol L-1, respectively. SIGNIFICANCE AND NOVELTY: A new portable dual-mode voltage-assisted integrated PAD platform was designed for iodide and dopamine analysis. The characteristics of this device allow non-experts to carry out in-field analysis using sub-100 µL saliva sample with a time-to-result of <10 min along with reducing the overall cost and operational complexity.

Should we reconsider blocking the thyroid for 123 I-Ioflupane studies in elderly patients: quantifying radiation dose to the unblocked thyroid and implications for clinical practice.

OBJECTIVES: To measure the absorbed dose to the thyroid in patients injected with 123 I-Ioflupane where the thyroid was not blocked with prophylaxis to investigate whether thyroid blocking should be limited to younger patients. This risk from the additional absorbed dose to the thyroid was then compared to the risk from iodine overdose through ingestion of the iodide prophylaxis, resulting in iodine-induced hyper/hypothyroidism (IIH). METHODS: A cohort of patients (n = 30) who did not receive thyroid prophylaxis underwent static thyroid imaging 3 h after 123 I-Ioflupane administration. The measured thyroidal uptake of free 123 I was then extrapolated to peak uptake time (24 h post-administration). This value was used to calculate cumulated activity in the thyroid and thus thyroid-thyroid absorbed dose D(rthy←rthy ) using the relevant S-value in the MIRD method. RESULTS: Mean D(rthy←rthy ) was found to be 13.6 mGy with an SD of 8.8 mGy; this would contribute an additional 0.5 mSv to the effective dose. CONCLUSION: ARSAC recommends in its Notes for Guidance prophylactic thyroid blocking if the absorbed dose to the thyroid is >50 mGy; the maximum thyroid dose in this study cohort was 36.3 mGy. With risk from IIH and its associated cardiac complications increasing with age, this study suggests that iodide prophylaxis with 123 I-Ioflupane should be reconsidered for elderly patient.