A study on MAPK/ERK and CDK2-Cyclin-E signal switch "on and off" in cell proliferation by bis urea derivatives of 1, 4-Diisocyanatobenzene.

A series of novel substituted bisurea 1,4-Diisocyanatobenzene compounds were designed, synthesized and introduced as potent anticancer compounds and screened for their in vitro anti-proliferative activities in human cancer cell lines. The structures of all titled compounds were characterized using Fourier-transform infrared mass spectra, nuclear magnetic resonance spectroscopy, elemental analysis and evaluated their sustainability using biological experiments. A selected group of ten derivatives were apprised for their anti-proliferative activity. The compounds 3d and 3e displayed potent anticancer activity with low IC50 value of 5.40, and 5.89 µM against HeLa cancer cell lines. The observed apoptosis data has demonstrated that compounds 3d and 3e induce the activaties of caspase-9 and caspase-3, the compounds 3d and 3e regulated fungal zone inhibition. Due to promising growth inhibitions, the all synthesized compounds were allowed to campaign includes quantum-polarized-ligand, quantum mechanical and molecular mechanical, docking experiments. The compounds 3d and 3e have exhibited a higher affinity for ERK/MAP kinase and CDK2 proteins. The molecular docking interactions have demonstrated two stage inhibition of cancer cells by binding with ERK/MAP kinase and CDK2 leads to inactivation of cell proliferation,cell cycle progression,cell divisionanddifferentiation, and hypo-phosphorylation of ribosome leading cells to restricts at point boundary of the G1/S phase. The long-range molecular dynamics, 150 ns, simulations were also revealed more consistency by 3d. Our study conclude good binding propensity for active-tunnel of ERK/MAP kinase and CDK2 proteins, by 3d (1,1'-(1,4-phenylene) bis(3-(2-chlorobenzyl)urea)), to suggest that the designed and synthesized 3d is to use as selective novel nuclei in anti-cancer chemotherapeutics.

Starch-based isocyanate- and non-isocyanate polyurethane hybrids: A review on synthesis, performance and biodegradation.

The challenges related to the persistence of plastics in natural ecosystems fostered strong interest in developing biodegradable bioplastics. Among natural biopolymers, starch gained both academic and industrial interest owing to its impressive physicochemical properties. The use of starch in production of polyurethane (PU) composites not only yields PUs with outstanding mechanical properties but also makes the final PU products biodegradable. The hydrophilic nature of starch limits its dispersion in hydrophobic PU polymers, although it is a significant benefit in creating starch-embedded non-isocyanate polyurethane (NIPU) composites. We present a comprehensive overview to highlight important strategies that are used to improve the compatibility of starch with various PU matrices. This review also gives an overview of the recent advances in the synthesis of starch-NIPU hybrids. Moreover, we aim to deliver critical insight into strategies that boost the biodegradation characteristics of PUs along with a discussion on various methods to assess their biodegradation.

A dicyanoisophorone-based, near-infrared, lysosome-targeting pH sensor with an extremely large Stokes shift.

Intracellular pH plays an important role in various biological processes; abnormal pH changes in the intracellular compartment leads to the production of free radicals, the disruption of membrane contractility, inappropriate apoptosis, and necrosis, resulting in serious illness. Although fluorescent probes have widely been used to detect pH levels owing to their high sensitivity and specificity, there is still a demand for near-infrared (NIR) fluorescent probes with high Stokes shift. Here, a NIR fluorescent probe, PipDC, comprising N-ethyl piperazine (response unit) and naphthyl dicyanoisophorone (fluorophore), was designed for pH sensing. The probe has an extremely large Stokes shift (290 nm), and its fluorescence intensity at 730 nm sharply increases when the environment changes from basic to acidic owing to the protonation of piperazine, which results in the quenching of the photoinduced electron transfer effect. It exhibited a specific response to acidic microenvironments regardless of other interfering substances. In addition, PipDC operates well in the lysosome environment in living cells and displays an off-on fluorescence response with pH alterations. Together, these results suggest that PipDC is a promising fluorescent probe for intracellular pH sensing.

New Insight on the Study of the Kinetic of Biobased Polyurethanes Synthesis Based on Oleo-Chemistry.

Nowadays, polyols are basic chemicals for the synthesis of a large range of polymers, such as polyurethane foams (PUF), which are produced with several other compounds, such as polyisocyanates. During the last decades, the oleo-chemistry has developed several routes from glycerides to polyols for the polyurethanes (PU) industry to replace mainly conventional fossil-based polyols. A large range of biobased polyols can be now obtained by epoxidation of the double bonds and ring-opening (RO) of the subsequent epoxides with different chemical moieties. In preliminary studies, the RO kinetics of an epoxidized model molecule (methyl oleate) with ethanol and acetic acid were investigated. Subsequently, polyols that were derived from unsaturated triglycerides were explored in the frame of e.g., PUF formulations. Different associations were studied with different mono-alcohols derived from epoxidized and ring-opened methyl oleate while using several ring-openers to model such systems and for comparison purposes. Kinetic studies were realized with the pseudo-first-order principle, meaning that hydroxyls are in large excess when compared to the isocyanate groups. The rate of isocyanate consumption was found to be dependent on the moiety located in ß-position of the reactive hydroxyl, following this specific order: tertiary amine >> ether > ester. The tertiary amine in ß-position of the hydroxyl tremendously increases the reactivity toward isocyanate. Consequently, a biobased reactive polyurethane catalyst was synthesized from unsaturated glycerides. These approaches offer new insights regarding the replacement of current catalysts often harmful, pungent, and volatile used in PU and PUF industry, in order to revisit this chemistry.

Polyurethane Coatings Based on Renewable White Dextrins and Isocyanate Trimers.

The polyurethane industry is strongly dependent on fossil-based polyols and polyisocyanates. Developing novel sustainable polyols from valuable biobased building blocks is a first step toward strong and durable development. The synthesis and properties of PU films based on pristine and acylated white dextrins (AVEDEX W80) as polyol and an aliphatic, low-viscosity, solvent-free triisocyanate based on hexamethylene diisocyanate (trimer-Desmodur N3300) as crosslinker is reported. After optimizing several conditions, such as the reaction time, reaction temperature, amount of solvent, isocyanate index, and amount per surface area, it is possible to obtain smooth PU films with good thermal properties.

The Curtius Rearrangement: Applications in Modern Drug Discovery and Medicinal Chemistry.

The Curtius rearrangement is the thermal decomposition of an acyl azide derived from carboxylic acid to produce an isocyanate as the initial product. The isocyanate can undergo further reactions to provide amines and their derivatives. Due to its tolerance for a large variety of functional groups and complete retention of stereochemistry during rearrangement, the Curtius rearrangement has been used in the synthesis of a wide variety of medicinal agents with amines and amine-derived functional groups such as ureas and urethanes. The current review outlines various applications of the Curtius rearrangement in drug discovery and medicinal chemistry. In particular, the review highlights some widely used rearrangement methods, syntheses of some key agents for popular drug targets and FDA-approved drugs. In addition, the review highlights applications of the Curtius rearrangement in continuous-flow protocols for the scale-up of active pharmaceutical ingredients.

Selective Conversion of CO2 into Isocyanate by Low-Coordinate Iron Complexes.

Discovery of the mechanisms for selective transformations of CO2 into organic compounds is a challenge. Herein, we describe the reaction of low-coordinate Fe silylamide complexes with CO2 to give trimethylsilyl isocyanate and the corresponding Fe siloxide complex. Kinetic studies show that this is a two-stage reaction, and the presence of a single equivalent of THF influences the rates of both steps. Isolation of a thermally unstable intermediate provides mechanistic insight that explains both the effect of THF in this reaction, and the way in which the reaction achieves high selectivity for isocyanate formation.

Synthesis of a novel biomedical poly(ester urethane) based on aliphatic uniform-size diisocyanate and the blood compatibility of PEG-grafted surfaces.

The purpose of this study is to offer a novel kind of polyurethane with improved surface blood compatibility for long-term implant biomaterials. In this work, the aliphatic poly(ester-urethane) (PEU) with uniform-size hard segments was prepared and the PEU surface was grafted with hydrophilic poly(ethylene glycol) (PEG). The PEU was obtained by chain-extension of poly(ɛ-caprolactone) (PCL) with isocyanate-terminated urethane triblock. Free amino groups were introduced onto the surface of PEU film via aminolysis with hexamethylenediamine, and then the NH2-grafted PEU surfaces (PEU-NH2) were reacted with isocyanate-terminated monomethoxyl PEG (MPEG-NCO) to obtain the PEG-grafted PEU surfaces (PEU-PEG). Analysis by nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and gel permeation chromatography were performed to confirm the chemical structures of the chain extender, PCL, PEU, and PEU-PEG. Additionally, the influence of aminolysis on the physical-mechanical properties of PEU films was investigated. Two glass transition temperatures and a broad endothermic peak were observed in the differential scanning calorimetry curves of PEU, which demonstrated a microphase-separated and semicrystalline structure, respectively. The PEU-PEG film exhibited excellent mechanical properties with an ultimate stress of ∼39 MPa and an elongation at break of ∼1190%, which was slightly lower than that of PEU, indicating that the aminolysis has little influence on the tensile properties. Evaluation of the blood compatibility of the films by bovine serum albumin adsorption and the platelet adhesion test revealed that the PEG-grafted surface had improved resistance to protein adsorption and excellent resistance to platelet adhesion. In vitro degradation tests showed that the PEU-PEG film could maintain its mechanical properties for more than six months and only lost ∼25% weight after 18 months. Due to the excellent mechanical properties, good blood compatibility and slow degradability, this novel kind of polyurethane hold significant promise for long-term implant biomaterials, especially soft tissue augmentation and regeneration.

The Curtius rearrangement: mechanistic insight and recent applications in natural product syntheses.

The Curtius rearrangement is a versatile reaction in which a carboxylic acid can be converted to an isocyanate through an acyl azide intermediate under mild conditions. The resulting stable isocyanate can then be readily transformed into a variety of amines and amine derivatives including urethanes and ureas. There have been wide-ranging applications of the Curtius rearrangement in the synthesis of natural products and their derivatives. Also, this reaction has been extensively utilized in the synthesis and application of a variety of biomolecules. In this review, we present mechanistic studies, chemical methodologies and reagents for the synthesis of isocyanates from carboxylic acids, the conversion of isocyanates to amines and amine derivatives, and their applications in the synthesis of bioactive natural products and their congeners.

Polymerization of hexamethylene diisocyanate in solution and a 260.23 m/z [M+H]+ ion in exposed human cells.

Hexamethylene diisocyanate (HDI) is an important industrial chemical that can cause asthma, however pathogenic mechanisms remain unclear. Upon entry into the respiratory tract, HDI's N=C=O groups may undergo nucleophilic addition (conjugate) to host molecules (e.g. proteins), or instead react with water (hydrolyze), releasing CO2 and leaving a primary amine in place of the original N=C=O. We hypothesized that (primary amine groups present on) hydrolyzed or partially hydrolyzed HDI may compete with proteins and water as a reaction target for HDI in solution, resulting in polymers that could be identified and characterized using LC-MS and LC-MS/MS. Analysis of the reaction products formed when HDI was mixed with a pH buffered, isotonic, protein containing solution identified multiple [M+H]+ ions with m/z's and collision-induced dissociation (CID) fragmentation patterns consistent with those expected for dimers (259.25/285.23 m/z), and trimers (401.36/427.35 m/z) of partially hydrolyzed HDI (e.g. ureas/oligoureas). Human peripheral blood mononuclear cells (PBMCs) and monocyte-like U937, but not airway epithelial NCI-H292 cell lines cultured with these HDI ureas contained a novel 260.23 m/z [M+H]+ ion. LC-MS/MS analysis of the 260.23 m/z [M+H]+ ion suggest the formula C13H29N3O2 and a structure containing partially hydrolyzed HDI, however definitive characterization will require further orthogonal analyses.

Efficient One-Pot Synthesis of Thiazol-2-imine Derivatives through Regioselective Reaction Between Primary Amines, Phenylisothiocyanate, and α-Chloroacetaldehyde.

AIM AND OBJECTIVE: Thiazol-2-imine derivatives are interested for their pharmaceutical and biologic activities. A literature survey reveals that there have been no any reports on the synthesis of thiazol-2-imine derivatives without substituents in position C-4 and C-5 via one-pot reaction. Herein we report an efficient one-pot route for synthesis of these compounds in good to high yields. MATERIALS AND METHOD: To a stirred mixture of amine (1 mmol) and phenylisothiocyanate (1 mmol) in EtOH (2 ml), KI (0.1 mmol) and DABCO (0.2 mmol) were added under reflux condition. Then α- chloroacetaldehyde (2 mmol) was added drop wise to the reaction mixture. After completion of the reaction, the product was purified over a silica gel short column (EtOAc/n-Hexane, 1:9). RESULTS: One pot reaction of primary amine, phenylisocyanate, and α-chloroacetaldehyde was carried out in the presence of various base and KI in different solvents. It was found that the maximum yield was obtained when the temperature reaches to the boiling point of EtOH. Comparing the reaction results in EtOH, CH3CN, THF, CH2Cl2, and H2O at reflux in the presence of various base, demonstrate that the yield of reaction in EtOH in the presence of DABCO was the most effective. When the reaction runs at the 20 mol% of the DABCO and 10 mol% of the KI, the yield and the time of the reaction were excellent. CONCLUSION: One-pot procedure can be used for the synthesis of thiazol-2-imine derivatives via the reaction of primary amines, α-chloroacetaldehyde, and phenylisothiocyanate in the presence of a catalytic amount of DABCO and potassium iodide in ethanol.

Synthesis of 2,3-Disubstituted Quinolines via Ketenimine or Carbodiimide Intermediates.

Cyclopenta[b]quinolines and cyclohexa[b]quinolines were prepared via the reactions of α-diazo ketones with N-(2-cyclopropylidenemethylphenyl)phosphanimines and N-(2-cyclobutylidenemethylphenyl) phosphanimine, respectively. The reaction proceeds in a cascade involving ketenimine formation, 6 π-electron ring closure, and 1,3-alkyl shift. A similar approach was developed for the synthesis of dihydropyrrolo-[2,3-b]quinolines from N-(2-cyclopropylidenemethylphenyl)phosphanimines and isocyanates.

C-Terminal Modification of Fully Unprotected Peptide Hydrazides via in Situ Generation of Isocyanates.

A method for chemo- and regioselective conjugation of nucleophiles to fully unprotected peptides and proteins via in situ generation of C-terminal isocyanates is reported. Oxidation of C-terminal peptide hydrazides in aqueous media followed by Curtius rearrangement of acyl azides reliably generates isocyanates, which react with a variety of external nucleophiles, such as hydrazines, hydrazides, aromatic thiols, and hydroxylamines. Multiple peptides and a 53 kDa protein hydrazide were conjugated to different nucleophiles using this reaction.

The role of nanocrystalline cellulose on the microstructure of foamed castor-oil polyurethane nanocomposites.

Nanocrystalline cellulose (CNC), obtained by sulphuric acid hydrolysis, was used to synthesize polyurethane foams (PUFs) based on a functionalized castor oil polyol and a Methylene diphenyl diisocyanate (MDI). Formulations with varying isocyanate index (FI) and NCO number were prepared. At 0.5 wt.%, SEM's of the fractured surface underlined that the CNC acted both as a nucleation agent and as a particulate surfactant with cell geometries and apparent density changing selectively. The chemical structure of the PUF (FTIR) changed after the incorporation of CNC by a relative change of the amount of urea, urethane and isocyanurate groups. A low NCO number and isocyanate index contributed to the migration of the CNC to the Hard Segment (HS), acting as reinforcement and improving substantially the compressive mechanical properties (Ec and σc improvements of 63 and 50%, respectively). For a high NCO number or isocyanate index, the CNC migrated to the Soft Segment (SS), without causing a reinforcement effect. The migration of the CNC was also detected with DSC, TGA and DMA, furtherly supporting the hypothesis that a low NCO number and index contributed both to the formation of a microstructure with a higher content of urethane groups.

An enantioselective strategy for the total synthesis of (S)-tylophorine via catalytic asymmetric allylation and a one-pot DMAP-promoted isocyanate formation/Lewis acid catalyzed cyclization sequence.

A new asymmetric total synthesis of a phenanthroindolizidine alkaloid (S)-tylophorine is reported, which features a catalytic asymmetric allylation of aldehydes and an unexpected one-pot DMAP promoted isocyanate formation and Lewis acid catalyzed intramolecular cyclization reaction. In addition, White's direct C-H oxidation catalyst system converting monosubstituted olefins to linear allylic acetates was also employed for late-stage transformation.

An alternative pathway for the synthesis of isocyanato- and urea-functionalised metal-organic frameworks.

We have developed a generic two-step post-functionalisation technique for transforming amino-functionalised MOFs into their isocyanate analogues. The first part of the synthetic pathway consists in the conversion of the amino moieties into azido groups. Next, the thermal activation of these azido groups leads to nitrene species that can react with carbon monoxide to yield the desired products. As a proof of concept, this method was applied to the highly stable Al-MIL-53-NH2 and to the acid-sensitive In-MIL-68-NH2. The resulting nitrene species were highly reactive, with side reactions dominating initially. This issue was overcome through the use of a mixed-linker strategy applied during the MOF synthesis that decreased the nitrene radical density within the pore, thereby permitting In-MIL-68-NH2 to be converted into its isocyanate analogue with 100% selectivity. To illustrate the potential of this method for grafting a wide library of potentially active organic groups inside MOFs, amines were condensed onto isocyanato MOFs to form urea analogues.

Activation of electrophilicity of stable Y-delocalized carbamate cations in intramolecular aromatic substitution reaction: evidence for formation of diprotonated carbamates leading to generation of isocyanates.

Although cations with three heteroatoms, such as monoprotonated guanidine and urea, are stabilized by Y-shaped conjugation and such Y-conjugated cations are sufficiently basic to be further protonated (or protosolvated) to dications in strongly acid media, only O-monoprotonated species have been detected in the case of carbamates even in magic acid. We found that the trifluoromethanesulfonic acid-catalyzed cyclization of arylethylcarbamates proceeds to afford dihydroisoquinolones in high yield. In strong acids, methyl carbamates are fully O-monoprotonated, and these monocations do not undergo cyclization even under heating. But, as the acidity of the reaction medium is further increased, the cyclization reaction of methyl phenethylcarbamates starts to proceed as a first-order reaction, with a linear relationship between rate and acidity. The sign and magnitude of the entropy of activation ΔS(‡) were found to be similar to those of other A(Ac)1 reactions. These results strongly support the idea that further protonation of the O-protonated carbamates is involved in the cyclization, but the concentration of the dications is very low and suggests that the rate-determining step is dissociation of methanol from the diprotonated carbamate to generate protonated isocyanate, which reacts with the aromatic ring. Therefore, O-protonated carbamates are weak bases in sharp contrast to other Y-shaped monocations.

Reactive N-protonated isocyanate species stabilized by bis(µ-hydroxo)divanadium(IV)-substituted polyoxometalate.

O- or N-protonated? The bis(µ-hydroxo)divanadium(IV)-substituted γ-Keggin-type polyoxometalate (see picture, left) (TBA)(4)[γ-SiV(IV)(2)W(10)O(36)(µ-OH)(4)] (TBA = tetra(n-butyl)ammonium) was synthesized and characterized by X-ray crystallography. Its reaction with phenyl isocyanate gave (TBA)(4)[γ-SiV(IV)(2)W(10)O(38)(µ-OH)(2)(PhNHCO)(2)], which contains two N-protonated phenyl isocyanate species and catalyzes the cyclotrimerization of phenyl isocyanate.

Boroalkyl group migration provides a versatile entry into α-aminoboronic acid derivatives.

A reaction exemplifying migration of boron-substituted carbon is described. We show that α-boroalkyl groups of transient boroalkyl acyl azide intermediates readily migrate from carbon to nitrogen. This process allows access to a new class of stable molecules, α-boryl isocyanates, from α-borylcarboxylic acid precursors. The methodology facilitates synthesis of a wide range of α-aminoboronic acid derivatives, including α,α-disubstituted analogues.

Formation of phosphino-substituted isocyanate by reaction of CO2 with group 2 complexes based on the (Me3Si)(i-Pr2P)NH ligand.

The group 2 complexes [(Me(3)Si)(i-Pr(2)P)N](2)M(THF)(x) (M = Mg, x = 1; M = Ca/Sr, x = 2) as well as an unusual dimagnesium complex {[(Me(3)Si)(i-Pr(2)P)N](3)Mg}Mg(n-C(4)H(9)) have been prepared and characterized by multinuclear NMR spectroscopy and single crystal X-ray diffraction. Each complex was shown to react with CO(2) under extremely mild conditions (15 min, 1 atm, room temperature) to give the isocyanate (i-Pr)(2)P-N═C═O. The independent syntheses of (i-Pr)(2)P-N═C═O and the carbodiimide dimer [(i-Pr)(2)PNCNP(i-Pr)(2)](2) are also reported.