Long-term monitoring of stimulated lower leg skeletal muscle forces compared with voluntary contractions in myopathy patients - A five-year follow-up report on 5 adults.

OBJECTIVE: Long-term assessments of lower leg muscle forces in ambulant patients with distal myopathies. METHODS AND MATERIALS: Over a five-year period, we measured involuntary, nerve-stimulated, isometric torques of the ankle dorsiflexors in a group of ambulant patients with myopathies and compared results with voluntary Manual Muscle Tests (MMT). RESULTS: From ten recruited patients, five could finish the five-year protocol. Twenty-seven force measurements sessions (one per year; 1,5 hours duration each) were performed. These patients exhibited low, stable torques or increased minimally (0.2 Newtonmeter, versus 0.1 Nm, ns; 0.7 vs. 1.0, ns; 3.4 vs. 3.5, ns; 0.2 vs. 0.1, ns; 0.8 vs. 1.5, P 0.0004 initial values vs. 5-year values, [norm: 3.9-5.7 Nm]). A 6th patient, eliciting low torque values (0.1 Nm) early passed away. Contraction times inversely correlated with MMT. MMT provided similar overall force abilities. CONCLUSIONS: Long-term monitoring of lower leg muscle forces in ambulant patients is limited by the patient's health status. In a small group of patients, stimulated lower leg forces did not worsen over many years relative to their diagnosed myopathies. Tracking involuntary forces, could be a useful monitoring providing phenotypic information, in addition to MMT. Future devices should be small and be simply self-applying, designed for subjects' domestic use and web-based data transfer. CLINICALTRIALS: gov NCT00735384.

Muscle Strength Preservation During Repeated Sets of Fatiguing Resistance Exercise: A Secondary Analysis.

ABSTRACT: Nuzzo, JL. Muscle strength preservation during repeated sets of fatiguing resistance exercise: A secondary analysis. J Strength Cond Res 38(6): 1149-1156, 2024-During sustained or repeated maximal voluntary efforts, muscle fatigue (acute strength loss) is not linear. After a large initial decrease, muscle strength plateaus at approximately 40% of baseline. This plateau, which likely reflects muscle strength preservation, has been observed in sustained maximal isometric and repeated maximal isokinetic contractions. Whether this pattern of fatigue occurs with traditional resistance exercise repetitions with free weights and weight stack machines has not been overviewed. Here, the aim was to determine whether the number of repetitions completed across 4 or more consecutive repetitions-to-failure tests exhibits the same nonlinear pattern of muscle fatigue. A secondary analysis was applied to data extracted as part of a recent meta-analysis on repetitions-to-failure tests. Studies were eligible if they reported mean number of repetitions completed in 4-6 consecutive repetitions-to-failure tests at a given relative load. Twenty-nine studies were included. Overall, the results show that the number of repetitions completed in consecutive repetitions-to-failure tests at a given load generally decreases curvilinearly. The numbers of repetitions completed in sets 2, 3, 4, 5, and 6 were equal to approximately 70, 55, 50, 45, and 45% of the number of repetitions completed in set 1, respectively. Longer interset rest intervals typically attenuated repetition loss, but the curvilinear pattern remained. From the results, a chart was created to predict the number of repetitions across 6 sets of resistance exercise taken to failure based on the number of repetitions completed in set 1. The chart is a general guide and educational tool. It should be used cautiously. More data from a variety of exercises, relative loads, and interset rest intervals are needed for more precise estimates of number of repetitions completed during repeated sets of fatiguing resistance exercise.

Test-retest reliability and concurrent validity of knee extensor strength measured by a novel device incorporated into a weight stack machine vs. handheld and isokinetic dynamometry.

BACKGROUND: The current clinical gold standard for assessing isometric quadriceps muscle strength is an isokinetic dynamometer (IKD). However, in clinics without an IKD, clinicians default to using handheld dynamometers (HHD), which are less reliable and accurate than the IKD, particularly for large muscle groups. A novel device (ND) was developed that locks the weight stack of weight machines, and measures forces applied to the machine, turning this equipment into an isometric dynamometer. The objectives of this study were to characterize the test-retest reliability of the ND, determine the within-day and between-days inter-rater reliability and concurrent validity compared with that of the HHD, in healthy volunteers (HV) and individuals with knee osteoarthritis (OA) for measuring knee extensors isometric muscle force. MATERIALS AND METHODS: 29 healthy (age = 28.4 ± 7.4 years) and 15 knee OA (age = 37.6 ± 13.4 years) participants completed three maximum force isometric strength testing trials on dominant side knee extensor muscles on three devices (ND, HHD, and IKD) in two separate sessions by two raters. The maximum force (Fmax) produced, and the force-time series were recorded. Reliability and validity were assessed using Intraclass Correlation Coefficient (ICC), Bland-Altman Plots, Pearson's r, and cross-correlations. RESULTS: The ND demonstrated excellent test-retest reliability (ICC2,3 = 0.97). The within-day (ICC2,3 = 0.88) and between-day inter-rater reliability (ICC2,3 = 0.87) was good for HHD. The ND showed excellent within-day (ICC2,3 = 0.93) and good between-day (ICC2,3 = 0.89) inter-rater reliability. The Bland-Altman analysis revealed HHD systematic bias and underestimation of force particularly with quadriceps force values exceeding 450 N. Mean differences were found in maximum force between HHD vs. IKD (MDabs = 58 N, p < .001) but not the HHD vs. ND (MDabs = 24 N, p = .267) or ND vs. IKD (MDabs = 34 N, p = .051). The concurrent validity of Fmax (r = 0.81) and force-time curve correlation (0.96 ± 0.05) were the highest between the ND and IKD. CONCLUSIONS: The ND's test-retest reliability and concurrent validity make it a potential strength assessment tool with utility in physical therapy and fitness settings for large muscle groups such as the knee extensors.

Endomysium determines active and passive force production in muscle fibers.

Connective tissues can be recognized as an important structural support element in muscles. Recent studies have also highlighted its importance in active force generation and transmission between muscles, particularly through the epimysium. In the present study, we aimed to investigate the impact of the endomysium, the connective tissue surrounding muscle fibers, on both passive and active force production. Pairs of skeletal muscle fibers were extracted from the extensor digitorum longus muscles of rats and, after chemical skinning, their passive and active force-length relationships were measured under two conditions: (i) with the endomysium between muscle fibers intact, and (ii) after its dissection. We found that the dissection of the endomysium caused force to significantly decrease in both active (by 22.2 % when normalized to the maximum isometric force; p < 0.001) and passive conditions (by 25.9 % when normalized to the maximum isometric force; p = 0.034). These findings indicate that the absence of endomysium compromises muscle fiber's not only passive but also active force production. This effect may be attributed to increased heterogeneity in sarcomere lengths, enhanced lattice spacing between myofilaments, or a diminished role of trans-sarcolemmal proteins due to dissecting the endomysium. Future investigations into the underlying mechanisms and their implications for various extracellular matrix-related diseases are warranted.

Clustering index analysis on EMG-Torque relation-based representation of complex neuromuscular changes after spinal cord injury.

Spinal cord injury (SCI) resulting in complex neuromuscular pathology is not sufficiently well understood. To better quantify neuromuscular changes after SCI, this study uses a clustering index (CI) method for surface electromyography (sEMG) clustering representation to investigate the relation between sEMG and torque in SCI survivors. The sEMG signals were recorded from 13 subjects with SCI and 13 gender-age matched able-bodied subjects during isometric contraction of the biceps brachii muscle at different torque levels using a linear electrode array. Two torque representations, maximum voluntary contraction (MVC%) and absolute torque, were used. CI values were calculated for sEMG. Regression analyses were performed on CI values and torque levels of elbow flexion, revealing a strong linear relationship. The slopes of regressions between SCI survivors and control subjects were compared. The findings indicated that the range of distribution of CI values and slopes was greater in subjects with SCI than in control subjects (p < 0.05). The increase or decrease in slope was also observed at the individual level. This suggests that the CI and its sEMG clustering-torque relation may serve as valuable quantitative indicators for determining neuromuscular lesions after SCI, contributing to the development of effective rehabilitation strategies for improving motor performance.

Circadian variation in muscle force output in males using isokinetic, isometric dynamometry: can we observe this in multi-joint movements using the muscleLab force-velocity encoder and are they similar in peak and magnitude?

We have investigated the magnitude of circadian variation in Isokinetic and Isometric strength of the knee extensors and flexors, as well as back squat and bench press performance using the MuscleLab force velocity transducer. Ten resistance-trained males (mean±SD: age 21.5 ± 1.1 years; body mass 78.3 ± 5.2 kg; height 1.71 ± 0.07 m) underwent a) three to four familiarization sessions on each dynamometer and b) four sessions at different times of day (03:00, 09:00, 15:00 and 21:00 h). Each session was administered in a counterbalanced order and included a period when Perceived onset of mood states (POMS), then rectal and muscle temperature (Trec, Tm) was measured at rest, after which a 5-min standardized 150 W warm-up was performed on a cycle ergometer. Once completed, Isokinetic (60 and 240°·s-1 for extension and flexion) and Isometric dynamometry with peak torque (PT), time-to-peak-torque (tPT) and peak force (PF) and % activation was measured. Lastly, Trec and Tm were measured before the bench press (at 30, 50 and 70 kg) and back squat (at 40, 60 and 80 kg) exercises. A linear encoder was attached to an Olympic bar used for the exercises and average force (AF), peak velocity (PV) and time-to-peak-velocity (tPV) were measured (MuscleLab software; MuscleLab Technology, Langesund, Norway) during the concentric phase of the movements. Five-min recovery was allowed between each set with three repetitions being completed. General linear models with repeated measures and cosinor analysis were used to analyse the data. Values for Trec and Tm at rest were higher in the evening compared to morning values (Acrophase Φ: 16:35 and 17:03 h, Amplitude A: 0.30 and 0.23°C, Mesor M: 36.64 and 37.43°C, p < 0.05). Vigor, happy and fatigue mood states responses showed Φ 16:11 and 16:03 h and 02:05 h respectively. Circadian rhythms were apparent for all variables irrespective of equipment used where AF, PF and PT values peaked between 16:18 and 18:34 h; PV, tPV and tPT peaked between 05:54 and 08:03 h (p < 0.05). In summary, circadian rhythms in force output (force, torque, power, and velocity) were shown for isokinetic, isometric dynamometers and complex multi-joint movements (using a linear encoder); where tPV and tPT occur in the morning compared to the evening. Circadian rhythms in strength can be detected using a portable, low-cost instrument that shows similar cosinor characteristics as established dynamometers. Hence, muscle-strength can be measured in a manner that is more directly transferable to the world of athletic and sports performance.

BiLSTM-Based Joint Torque Prediction From Mechanomyogram During Isometric Contractions: A Proof of Concept Study.

Quantifying muscle strength is an important measure in clinical settings; however, there is a lack of practical tools that can be deployed for routine assessment. The purpose of this study is to propose a deep learning model for ankle plantar flexion torque prediction from time-series mechanomyogram (MMG) signals recorded during isometric contractions (i.e., a similar form to manual muscle testing procedure in clinical practice) and to evaluate its performance. Four different deep learning models in terms of model architecture (based on a stacked bidirectional long short-term memory and dense layers) were designed with different combinations of the number of units (from 32 to 512) and dropout ratio (from 0.0 to 0.8), and then evaluated for prediction performance by conducting the leave-one-subject-out cross-validation method from the 10-subject dataset. As a result, the models explained more variance in the untrained test dataset as the error metrics (e.g., root-mean-square error) decreased and as the slope of the relationship between the measured and predicted joint torques became closer to 1.0. Although the slope estimates appear to be sensitive to an individual dataset, >70% of the variance in nine out of 10 datasets was explained by the optimal model. These results demonstrated the feasibility of the proposed model as a potential tool to quantify average joint torque during a sustained isometric contraction.

Reliability and Validity of the Strain Gauge "GSTRENGTH" for Measuring Peak Force in the Isometric Belt Squat at Different Joint Angles.

Since isometric training is gaining popularity, some devices are being developed to test isometric force as an alternative to the more expensive force plates (FPs); thus, the aim of this study was to test the reliability and validity of "GSTRENGTH" for measuring PF in the isometric belt squat exercise. Five subjects performed 24 contractions at three different knee angles (90°, 105° and 120°) on two occasions (120 total cases). Peak force data were measured using FPs and a strain gauge (SG) and analyzed by Pearson's product-moment correlation coefficient, ICCs, Cronbach's alpha, a paired sample t-test and Bland-Altman plots. Perfect or almost perfect relationships (r: 0.999-1) were found with an almost perfect or perfect level of agreement (ICCs: 0.992-1; α: 0.998-1). The t-test showed significant differences for the raw data but not for the predictions by the equations obtained with the SG values. The Bland-Altman plots, when significant, showed trivial to moderate values for systematic bias in general. In conclusion, "GSTRENGTH" was shown to be a valid alternative to FPs for measuring PF.

Sensitivity of the airway smooth muscle in terms of force, shortening and stiffness.

Eight pig tracheal strips were stimulated to contract with log increments of methacholine from 10-8 to 10-5 M. For each strip, the concentration-response was repeated four times in a randomized order to measure isometric force, isotonic shortening against a load corresponding to either 5 or 10 % of a reference force, and average force, stiffness, elastance and resistance over one cycle while the strip length was oscillating sinusoidally by 5 % at 0.2 Hz. For each readout, the logEC50 was calculated and compared. Isotonic shortening with a 5 % load had the lowest logEC50 (-7.13), yielding a greater sensitivity than any other contractile readout (p<0.05). It was followed by isotonic shortening with a 10 % load (-6.66), elastance (-6.46), stiffness (-6.46), resistance (-6.38), isometric force (-6.32), and average force (-6.30). Some of these differences were significant. For example, the EC50 with the average force was 44 % greater than with the elastance (p=0.001). The methacholine sensitivity is thus affected by the contractile readout being measured.

Added load increases the peak frequency of intermuscular coherence.

Cortical motor neuron activity appears to drive lower motor neurons through two distinct frequency bands: the ß range (15-30 Hz) during weak muscle contractions and γ range (30-50 Hz) during strong contractions. It is unknown whether the frequency of cortical drive shifts continuously or abruptly between the ß and γ frequency bands as contraction strength changes. Intermuscular coherence (IMC) between synergistic arm muscles was used to assess how the frequency of common neuronal drive shifts with increasing contraction strength. Muscle activity was recorded by surface electromyography (EMG) from the biceps and brachioradialis in nine healthy adults performing 30-second isometric holds with added loads. IMC was calculated across the two muscle groups during the isometric contraction. Significant IMC was present in the 20 to 50 Hz range with all loads. Repeated measures ANOVA show the peak frequency of IMC increased significantly when load was added, from a peak of 32.7 Hz with no added load, to 35.3 Hz, 35.7 Hz, and 36.3 Hz with three-, five-, and ten-pound loads respectively. An increase in IMC frequency occurs in response to added load, suggesting that cortical drive functions over a range of frequencies as a function of an isometric contraction against load.

The Effects of Anchoring a Fatiguing Forearm Flexion Task to a High vs. Low Rating of Perceived Exertion on Torque and Neuromuscular Responses.

ABSTRACT: Ortega, DG, Housh, TJ, Smith, RW, Arnett, JE, Neltner, TJ, Schmidt, RJ, and Johnson, GO. The effects of anchoring a fatiguing forearm flexion task to a high versus low rating of perceived exertion on torque and neuromuscular responses. J Strength Cond Res 38(5): e219-e225, 2024-This study examined the torque and neuromuscular responses following sustained, isometric, forearm flexion tasks anchored to 2 ratings of perceived exertion (RPE). Nine men (mean ± SD: age = 21.0 ± 2.4 years; height = 179.5 ± 5.1 cm; body mass = 79.6 ± 11.4 kg) completed maximal voluntary isometric contractions (MVIC) before and after sustained, isometric, forearm flexion tasks to failure anchored to RPE = 2 and RPE = 8. The amplitude (AMP) and mean power frequency (MPF) of the electromyographic (EMG) signal were recorded from the biceps brachii. Normalized torque was divided by normalized EMG AMP to calculate neuromuscular efficiency (NME). A dependent t-test was used to assess the mean difference for time to task failure (TTF). Repeated-measures analysis of variances was used to compare mean differences for MVIC and normalized neuromuscular parameters. There was no significant difference in TTF between RPE = 2 and RPE = 8 (p = 0.713). The MVIC decreased from pretest to posttest at RPE = 2 (p = 0.009) and RPE = 8 (p = 0.003), and posttest MVIC at RPE = 8 was less than that at RPE = 2 (p < 0.001). In addition, NME decreased from pretest to posttest (p = 0.008). There was no change in normalized EMG AMP or EMG MPF (p > 0.05). The current findings indicated that torque responses were intensity specific, but TTF and neuromuscular responses were not. Furthermore, normalized EMG AMP and EMG MPF remained unchanged but NME decreased, likely due to peripheral fatigue and excitation-contraction coupling failure. Thus, this study provides information regarding the neuromuscular responses and mechanisms of fatigue associated with tasks anchored to RPE, which adds to the foundational understanding of the relationship between resistance exercise and the perception of fatigue.

Spectral characterization of human leg EMG signals from an open access dataset for the development of computational models.

Large-scale neuromusculoskeletal models have been used for predicting mechanisms underlying neuromuscular functions in humans. Simulations of such models provide several types of signals of practical interest, such as surface electromyographic signals (EMG), which are compared with experimental data for interpretations of neurophysiological phenomena under study. Specifically, realistic characterization of spectral properties of simulated EMG signals is important for achieving powerful inferences, whereas considerations should be taken for myoelectric signals of different muscles. In this study, we characterized spectral properties of surface interference pattern EMG signals and motor unit action potentials (MUAP) acquired from three plantar flexor muscles: Soleus (SO), Medial Gastrocnemius (MG), and Lateral Gastrocnemius (LG); and one dorsiflexor muscle: Tibialis Anterior (TA). Surface EMG signals were acquired from 20 participants using the same convention for electrode placement. Specifically, interference pattern EMG signals were obtained during isometric constant force contractions at 5%, 10% and 20% of maximum voluntary contraction (MVC), whereas surface MUAPs were decomposed from surface EMG signals obtained at low contraction forces. We compared the spectrum median frequency (MDF) estimated from interference pattern EMG signals across muscles and contraction intensities. Additionally, we compared MDF and durations of MUAPs between muscles. Our results showed that MDF of interference pattern EMG signals acquired from TA were higher compared to SO, MG, and LG for all contraction intensities i.e., 5%, 10%, and 20% MVC. Consistently, MUAPs acquired from TA also had higher MDF values and shorter durations compared to the other leg muscles. We provide herein a dataset with the surface MUAPs waveforms and interference pattern EMG signals obtained for this study, which should be useful for implementing and validating the simulation of myoelectrical signals of leg muscles. Importantly, these results indicate that spectral properties of myoelectrical signals should be considered for improving EMG modeling in large-scale neuromusculoskeletal models.

Comparison of force and timing control in periodic isometric leg extension.

BACKGROUND: In daily life and sports activities, the regulation of muscle force and timing is often not controlled independently, rather the appropriate amount of force is controlled simultaneously with appropriate timing. However, which of the two variables, force or timing, is more difficult to control remains unclear. OBJECTIVE: We aimed to investigate the difficulty in the accurate control of force and timing, simultaneously. By setting target levels for force and timing interval, with both target lines presented, none of them presented, or only one of the target lines for force or timing interval presented, we directly examined and identified which variable is more important. METHODS: Participants were asked to produce periodic isometric knee extension force using their right leg. The following four tasks were established: 20 %MVF-1000 ms task (20 % maximum voluntary force [MVF] at 1000 ms intervals), 20 %MVF-2000 ms task (20 % MVF at 2000 ms intervals), 40 %MVF-1000 ms task (40 % MVF at 1000 ms intervals), and 40 %MVF-2000 ms task (40 % MVF at 2000 ms intervals). Moreover, the participants performed four tasks under the following four conditions based on target line presentation: Both variables condition (force and interval lines presented), force condition (only force line presented), interval condition (only interval line presented), and no variable condition (neither force nor interval lines presented). The recorded force data were analyzed. RESULTS: Regarding the force factor, the error of the interval and no variable conditions was greater than that of the both variables and force conditions. As for the interval factor, the error was greater when the target interval line was not presented (force and no variable conditions) than when it was presented (both variables and interval conditions), and it exceeded the target interval in the 1000 ms task, whereas it was shorter than the target interval in the 2000 ms task. Except for the force condition, the force factor showed significantly greater absolute errors when the target level was set as 100 %, compared to the interval factor. CONCLUSIONS: The control of force was found to be more difficult than that of timing, based on aspects relating to accuracy and reproducibility.

Stretch-shortening cycles protect against the age-related loss of power generation in rat single muscle fibres.

Aging is associated with impaired strength and power during isometric and shortening contractions, however, during lengthening (i.e., eccentric) contractions, strength is maintained. During daily movements, muscles undergo stretch-shortening cycles (SSCs). It is unclear whether the age-related maintenance of eccentric strength offsets age-related impairments in power generation during SSCs owing to the utilization of elastic energy or other cross-bridge based mechanisms. Here we investigated how aging influences SSC performance at the single muscle fibre level and whether performing active lengthening prior to shortening protects against age-related impairments in power generation. Single muscle fibres from the psoas major of young (∼8 months; n = 31 fibres) and old (∼32 months; n = 41 fibres) male F344BN rats were dissected and chemically permeabilized. Fibres were mounted between a force transducer and length controller and maximally activated (pCa 4.5). For SSCs, fibres were lengthened from average sarcomere lengths of 2.5 to 3.0 µm and immediately shortened back to 2.5 µm at both fast and slow (0.15 and 0.60 Lo/s) lengthening and shortening speeds. The magnitude of the SSC effect was calculated by comparing work and power during shortening to an active shortening contraction not preceded by active lengthening. Absolute isometric force was ∼37 % lower in old compared to young rat single muscle fibres, however, when normalized to cross-sectional area (CSA), there was no longer a significant difference in isometric force between age groups, meanwhile there was an ∼50 % reduction in absolute power in old as compared with young. We demonstrated that SSCs significantly increased power production (75-110 %) in both young and old fibres when shortening occurred at a fast speed and provided protection against power-loss with aging. Therefore, in older adults during everyday movements, power is likely 'protected' in part due to the stretch-shortening cycle as compared with isolated shortening contractions.

The Relationship of Open- and Closed-Kinetic-Chain Rate of Force Development With Jump Performance Following Anterior Cruciate Ligament Reconstruction.

PURPOSE: To determine between-limbs differences in isometric rate of force development (RFD) measured during open- (OKC) and closed-kinetic-chain (CKC) strength testing and establish which method had the strongest relationship to single-leg vertical-jump performance and knee mechanics after anterior cruciate ligament (ACL) reconstruction. METHODS: Subjects (n = 19) 1 to 5 years from ACL reconstruction performed isometric knee extensions (OKC), unilateral isometric midthigh pulls (CKC), and single-leg vertical jumps on the ACL-involved and -noninvolved limbs. Between-limbs differences were assessed using paired t tests, and the relationship between RFD, jump performance, and knee mechanics was assessed using correlation coefficients (r; P ≤ .05). RESULTS: There were significant between-limbs differences in OKC RFD (P = .008, d = -0.69) but not CKC RFD. OKC RFD in the ACL-involved limb had a strong association with jump height (r = .64, P = .003), knee-joint power (r = .72, P < .001), and peak knee-flexion angle (r = .72, P = .001). CKC RFD in the ACL-involved limb had a strong association with jump height (r = .65, P = .004) and knee-joint power (r = .67, P = .002) but not peak knee-flexion angle (r = .40, P = .09). CONCLUSIONS: While both OKC and CKC RFD were strongly related to jump performance and knee-joint power, OKC RFD was able to detect between-limbs RFD asymmetries and was strongly related to knee-joint kinematics. These findings indicate that isometric knee extension may be optimal for assessing RFD after ACL reconstruction.

Validity and Reliability of Handheld Dynamometry to Assess Isometric Hamstrings and Quadriceps Strength at Varying Muscle Lengths.

CONTEXT: The hamstrings are the most commonly injured muscle in sports and are especially injury prone in lengthened positions. Measuring knee muscle strength in such positions could be relevant to establish injury risk. Handheld dynamometry has been shown to be a valid, reliable, and practical tool to measure isometric muscle strength clinically. The aim of this study was to assess the validity and reliability of the assessment of isometric knee muscle strength with a handheld dynamometer (HHD) at various muscle lengths, by modifying the hip and knee angles during testing. DESIGN: Concurrent validity and test-retest reliability. METHODS: Thirty young healthy participants were recruited. Hamstring and quadriceps isometric strength was measured with a HHD and with an isokinetic dynamometer, over 2 testing sessions, in a randomized order. Isometric strength was measured on the right lower limb in 6 different positions, with the hip at either 0° or 80° of flexion and the knee at either 30°, 60°, or 90° of flexion. Pearson and Spearman correlations were used to assess the validity, and intraclass correlation coefficients were calculated to establish the test-retest reliability of the HHD. RESULTS: Good to excellent reliability and moderate to high validity were found in all the tested muscle length positions, except for the hamstrings in a seated position with the knee extended at 30°. CONCLUSIONS: The use of a HHD is supported in the clinical setting to measure knee muscle strength at varying muscle lengths in healthy adults, but not for the hamstrings in a lengthened position (hip flexed and knee extended). These results will have to be confirmed in sport-specific populations.

The effects of muscle starting length on work loop power output of isolated mouse soleus and extensor digitorum longus muscle.

Force-length relationships derived from isometric activations may not directly apply to muscle force production during dynamic contractions. As such, different muscle starting lengths between isometric and dynamic conditions could be required to achieve maximal force and power. Therefore, this study examined the effects of starting length [±5-10% of length corresponding to maximal twitch force (L0)] on work loop (WL) power output (PO), across a range of cycle frequencies, of the soleus (SOL) and extensor digitorum longus muscle (EDL; N=8-10) isolated from ∼8 week old C57 mice. Furthermore, passive work was examined at a fixed cycle frequency to determine the association of passive work and active net work. Starting length affected maximal WL PO of the SOL and EDL across evaluated cycle frequencies (P<0.030, ηp2>0.494). For the SOL, PO produced at -5% L0 was greater than that at most starting lengths (P<0.015, Cohen's d>0.6), except -10% L0 (P=0.135, d<0.4). However, PO produced at -10% L0 versus L0 did not differ (P=0.138, d=0.35-0.49), indicating -5% L0 is optimal for maximal SOL WL PO. For the EDL, WL PO produced at -10% L0 was lower than that at most starting lengths (P<0.032, d>1.08), except versus -5% L0 (P=0.124, d<0.97). PO produced at other starting lengths did not differ (P>0.163, d<1.04). For the SOL, higher passive work was associated with reduced PO (Spearman's r=0.709, P<0.001), but no relationship was observed between passive work and PO of the EDL (Pearson's r=0.191, r2=0.04, P=0.184). This study suggests that starting length should be optimised for both static and dynamic contractions and confirms that the force-length curve during dynamic contractions is muscle specific.

The role of the deep cervical extensor muscles in multi-directional isometric neck strength.

Clinical management of whiplash-associated disorders is challenging and often unsuccessful, with over a third of whiplash injuries progressing to chronic neck pain. Previous imaging studies have identified muscle fat infiltration, indicative of muscle weakness, in the deep cervical extensor muscles (multifidus and semispinalis cervicis). Yet, kinematic and muscle redundancy prevent the direct assessment of individual neck muscle strength, making it difficult to determine the role of these muscles in motor dysfunction. The purpose of this study was to determine the effects of deep cervical extensor muscle weakness on multi-directional neck strength and muscle activation patterns. Maximum isometric forces and associated muscle activation patterns were computed in 25 test directions using a 3-joint, 24-muscle musculoskeletal model of the head and neck. The computational approach accounts for differential torques about the upper and lower cervical spine. To facilitate clinical translation, the test directions were selected based on locations where resistance could realistically be applied to the head during clinical strength assessments. Simulation results reveal that the deep cervical extensor muscles are active and contribute to neck strength in directions with an extension component. Weakness of this muscle group leads to complex compensatory muscle activation patterns characterized primarily by increased activation of the superficial extensors and deep upper cervical flexors, and decreased activation of the deep upper cervical extensors. These results provide a biomechanistic explanation for movement dysfunction that can be used to develop targeted diagnostics and treatments for chronic neck pain in whiplash-associated disorders.

Home-based resistance training performed at either fast or slow speeds improves power output in older adults.

PURPOSE: We investigated the effect of an unsupervised, body mass- home-based resistance training program in older adults performed at either a fast or slow contractile speed on changes to muscle-power, -volume, -architecture, and fatigue resistance of the knee extensors. METHODS: Thirty-two male older adults (age 65-88 years) were separated into 1) fast-speed exercise (Fast-group), 2) slow-speed exercise (Slow-group), and 3) no exercise (Control-group) groups. Participants in the exercise groups performed 30-45 repetitions of knee-extension and sit-to-stand exercises 3 times a week for 8 weeks with different exercise speed between the groups. Before and after the intervention period, the following variables were measured: Isotonic power, isometric strength, twitch contractile properties, muscle-activity, -architecture, and -quality, neuromuscular fatigue resistance of the knee extensors, and thigh muscle volume. RESULTS: Peak power was increased in both the Fast-group (+24 %, P < 0.01, d = 0.65) and Slow-group (+12 %, P < 0.05, d = 0.33) but not in the Control-group. Training increased pennation angle of the vastus lateralis in both the Fast-group (+8 %, P < 0.01, d = 0.42) and Slow-group (+8 %, P < 0.01, d = 0.42), while only the Fast-group showed increase in pennation angle of the rectus femoris (+12 %, P < 0.01, d = 0.64) and thigh muscle volume (+16 %, P < 0.01, d = 0.52). There was no time × group interaction effect for the other neuromuscular measures. CONCLUSIONS: Unsupervised, body mass- and home-based resistance training performed at either fast or slow speeds can improve muscle power in older adults, while fast-speed exercise may be preferable over slow-speed owing to the relatively greater improvement of muscle-power, -volume, -architecture, and better time efficiency.