Molecularly Imprinted Drug Carrier for Lamotrigine-Design, Synthesis, and Characterization of Physicochemical Parameters.

This study presents the initial attempt at introducing a magnetic molecularly imprinted polymer (MIP) designed specifically for lamotrigine with the purpose of functioning as a drug carrier. First, the composition of the magnetic polymer underwent optimization based on bulk polymer adsorption studies and theoretical analyses. The magnetic MIP was synthesized from itaconic acid and ethylene glycol dimethacrylate exhibiting a drug loading capacity of 3.4 ± 0.9 µg g-1. Structural characterization was performed using powder X-ray diffraction analysis, vibrating sample magnetometry, and Fourier transform infrared spectroscopy. The resulting MIP demonstrated controlled drug released characteristics without a burst effect in the phospahe buffer saline at pH 5 and 8. These findings hold promise for the potential nasal administration of lamotrigine in future applications.

Liquid chromatography coupled with tandem mass spectrometry for simultaneous quantification of valproate, valproate-glucuronide and lamotrigine in various biological matrices of rat.

Valproate and lamotrigine are commonly used as antiepileptic drugs even in pregnant and breastfeeding women. The extent and effects of drug exposure on the developing brain of the offspring are not well understood. Animal models can be utilised to investigate the transfer of substances into fetal brain with the ultimate aim of providing insights to aid clinical decisions. In the present study, an LC-MS/MS method was developed and validated for quantification of valproate (VPA), valproate-glucuronide (VPA-Gluc, a major metabolite of valproate) and lamotrigine (LTG) in rat blood plasma, cerebrospinal fluid and brain tissue. A 10 µl sample was spiked with stable isotope-labelled internal standards and extracted by methanol. An Agilent RRHD Eclipse Plus C18 column (2.1 × 100 mm, 1.8 µm) was used. The MS/MS transitions were 143.1016-143.1016 (VPA), 319.1392-143.0978 (VPA-Gluc) and 256.0157-210.9826 (LTG). The linear ranges of VPA, VPA-Gluc and LTG were 30-250, 10-140 and 0.3-1 µg/ml, respectively. The intra- and inter-day accuracy and precision, carryover, sensitivity and recovery were evaluated according to the US Food and Drug Administration guidance for bioanalytical method validation. Finally, the validated method was applied to a set of experimental animal samples and produced results highly comparable with those from an orthogonal analytical method.

Modulation of the powder properties of lamotrigine by crystal forms.

The mechanical properties of powders determine the ease of manufacture and ultimately the quality of the oral solid dosage forms. Although poor mechanical properties of an active pharmaceutical ingredient (API) can be mitigated by using suitable excipients in a formulation, the effectiveness of that approach is limited for high dose drugs or multidrug tablets. In this context, improving the mechanical properties of the APIs through solid form optimisation is a good strategy to address such a challenge. This work explores the powder and tableting properties of various lamotrigine (LAM) solid forms with the aim to facilitate direct compression by overcoming the poor tabletability of LAM. The two drug-drug crystals of LAM with nicotinamide and valproic acid demonstrate superior flowability and tabletability over LAM. The improved powder properties are rationalised by structure analysis using energy framework, scanning electron microscopy, and Heckel analysis.

Lamotrigine Nanoparticle Laden Polymer Composite Oral Dissolving Films for Improving Therapeutic Potential of the Hydrophobic Antiepileptic Molecule.

Lamotrigine is used for neurological disorders and antiepileptic therapy at frequent dosing due to its poor solubility. The present work aims to study the influence of combining the Lamotrigine nanoparticles and polymer composite oral dissolving film to improve the solubility and dissolution kinetics of the drug. The Lamotrigine-Eudragit E100 nanoparticles were synthesized through solvent evaporation followed by precipitation process, which were laden in oral dissolving films through solvent casting technique. The optimized nanoparticles were assessed for particle size, colloidal stability, drug entrapment efficiency, in vitro release profile, physicochemical characteristics, and cytotoxicity. The optimized polymeric nanoparticles of Lamotrigine: Eudragit E100 (1:0.5) exhibited monodispersed particles with 103 nm average size, +7.96 mV zeta potential, and 82.96% ± 1.2% entrapment efficiency. The composite oral matrix films blended with polyvinyl alcohol and polyvinyl pyrrolidone (0.5:0.5 ratio) incorporated with the polymeric nanoparticles demonstrated >64% drug release within 2 h. The nanoparticles and its composite films exhibited 9- and 11-fold higher drug release than pure drug, respectively. The analytical characterization studies proved the formation of nanoparticles with mild drug-polymer interactions and optimum stability, which resulted in enhanced solubility and dissolution of drug. The nanoparticles displayed lesser cytotoxicity to the normal (Vero) cells at concentration of 10-50 µg/mL compared to pure drug. The optimized polymeric nanoparticle loaded oral films could be suitable for in vivo administration of Lamotrigine at low doses to improve bioavailability and therapeutic efficiency with reduced side effects.

Interactions of lamotrigine with single- and double-stranded DNA under physiological conditions.

This study presents evaluation of the possible mechanisms of interaction between the antiepileptic drug lamotrigine (LMT) and single- and double-stranded DNA (ssDNA and dsDNA, respectively). These interactions were studied in phosphate-buffered saline (PBS) at physiological pH 7.4 by cyclic voltammetry (CV) and square wave voltammetry (SWV) using a glassy carbon electrode (GCE) in a bulk incubated solution. The addition of both types of DNA to LMT solution decreased peak currents and led to a negative shift in peak potentials, thus indicating the dominance of electrostatic interactions. UV-Vis absorption spectroscopy was also used to assess the interaction between ds/ssDNA and LMT. The data obtained from spectroscopic analysis confirmed that electrostatic interaction is the predominant interaction between LMT and both types of DNA. The calculated binding constants for LMT-dsDNA and LMT-ssDNA complexes as determined by SWV were 6.46 × 105 and 1.81 × 106, respectively, while the values obtained from UV-Vis spectroscopy were 6.93 × 105 and 1.19 × 106, respectively. The obtained results indicated a higher affinity of LMT for ssDNA than for dsDNA.

Formulation optimization of smart thermosetting lamotrigine loaded hydrogels using response surface methodology, box benhken design and artificial neural networks.

The aim of this research was to develop lamotrigine containing thermosetting hydrogel for intranasal administration to manage and treat generalized epilepsy. Thermosetting hydrogels were prepared using different ratios of poloxamer 407 (L127), poloxamer 188 (L68) and Carbopol® 974 P NF (C974) using the cold production process. The in situ thermosetting hydrogel was optimized using Box Behken design. Co-solvency approach was used to increase the solubility of lamotrigine by dissolving it in propylene glycol and polyethylene glycol 400 (0.2: 0.8) and the resultant solution was incorporated in the hydrogel to manufacture an LTG hydrogel. The presence of a higher amount of L127 resulted in higher viscosity at 22 °C and 34 °C and decreased the overall release of LTG. An increase in the amount of C974 resulted in a decrease in the pH of the hydrogel. The results show that formulations F10, F12, F13, F14, F15, F16 and F17 exhibited acceptable thermosetting behavior, pH and released adequate Lamotrigine above the minimum effective concentration to treat generalized epilepsy. The optimized formulation exhibited acceptable thermosetting behavior, pH and lamotrigine release but formed a stiff gel at 22 °C. The average LTG content of the optimized hydrogel was 5.00 ± 0.0225 mg/ml with % recovery of 99.17%. The amount of LTG released at 12 h from the optimized hydrogel was 3.21 ± 0.0155 mg and will be therapeutically effective in the brain after absorption via the olfactory region in the nasal cavity.

Preparation and characterization of lamotrigine containing nanocapsules for nasal administration.

Nanocapsules (NCs) have become one of the most researched nanostructured drug delivery systems due to their advantageous properties and versatility. NCs can enhance the bioavailabiliy of hydrophobic drugs by impoving their solubility and permeability. Also, they can protect these active pharmaceutical agents (APIs) from the physiological environment with preventing e.g. the enzymatic degradation. NCs can be used for many administration routes: e.g. oral, dermal, nasal and ocular formulations are exisiting in liquid and solid forms. The nose is one of the most interesting alternative drug administration route, because local, systemic and direct central nervous system (CNS) delivery can be achived; this could be utilized in the therapy of CNS diseases. Therefore, the goal of this study was to design, prepare and investigate a novel, lamotrigin containing NC formulation for nasal administration. The determination of micrometric parameters (particle size, polydispersity index, surface charge), in vitro (drug loading capacity, release and permeability investigations) and in vivo characterization of the formulations were performed in the study. The results indicate that the formulation could be a promising alternative of lamotrigine (LAM) as the NCs were around 305 nm size with high encapsulation efficiency (58.44%). Moreover, the LAM showed rapid and high release from the NCs in vitro and considerable penetration to the brain tissues was observed during the in vivo study.

Development of a methodology to make individual estimates of the precision of liquid chromatography-tandem mass spectrometry drug assay results for use in population pharmacokinetic modeling and the optimization of dosage regimens.

BACKGROUND: The clinical value of therapeutic drug monitoring can be increased most significantly by integrating assay results into clinical pharmacokinetic models for optimal dosing. The correct weighting in the modeling process is 1/variance, therefore, knowledge of the standard deviations (SD) of each measured concentration is important. Because bioanalytical methods are heteroscedastic, the concentration-SD relationship must be modeled using assay error equations (AEE). We describe a methodology of establishing AEE's for liquid chromatography-tandem mass spectrometry (LC-MS/MS) drug assays using carbamazepine, fluconazole, lamotrigine and levetiracetam as model analytes. METHODS: Following method validation, three independent experiments were conducted to develop AEE's using various least squares linear or nonlinear, and median-based linear regression techniques. SD's were determined from zero concentration to the high end of the assayed range. In each experiment, precision profiles of 6 ("small" sample sets) or 20 ("large" sample sets) out of 24 independent, spiked specimens were evaluated. Combinatorial calculations were performed to attain the most suitable regression approach. The final AEE's were developed by combining the SD's of the assay results, established in 24 specimens/spiking level and using all spiking levels, into a single precision profile. The effects of gross hyperbilirubinemia, hemolysis and lipemia as laboratory interferences were investigated. RESULTS: Precision profiles were best characterized by linear regression when 20 spiking levels, each having 24 specimens and obtained by performing 3 independent experiments, were combined. Theil's regression with the Siegel estimator was the most consistent and robust in providing acceptable agreement between measured and predicted SD's, including SD's below the lower limit of quantification. CONCLUSIONS: In the framework of precision pharmacotherapy, establishing the AEE of assayed drugs is the responsibility of the therapeutic drug monitoring service. This permits optimal dosages by providing the correct weighting factor of assay results in the development of population and individual pharmacokinetic models.

Evaluation of solubility and dissolution of lamotrigine using lipid based microparticulate carriers: An in-vitro analysis.

The present study was designed to develop novel lipid microparticles in order to improve solubility, dissolution and bioavailability of a lipophilic drug of BCS class II, lamotrigine. For that purpose, increase in solubility of the model drug was investigated using different lipids and the promising lipids were further used for the fabrication of microparticles. Solid lipid (GMS) and liquid lipid (olive oil) were used along with an emulsifier (Tween 80) and a stabilizer (Poloxamer 188) to prepare mircoparticles by melt emulsification method. Prepared formulations were characterized for physicochemical properties such as solubility, particle size, zeta potential, polydispersity index and entrapment efficiency. In vitro dissolution studies were carried out in 0.01 N HCl for 24 h. The findings provided that the solubility of lamotrigine was reasonably increased in GMS, olive oil, Tween 80 and poloxamer 180. The lamotrigine solubility was increased 4.92 fold with G4 microparticles formulation. Size analysis revealed that the microparticles were in range of 11.1 to 178.8 µm and the zeta potential values were from -13 to -20 mV. Microparticles prepared with solid and liquid lipids exhibited satisfactory entrapment efficiency ranging from 59 to 87%. Conclusively, the outcomes of the studies suggest the appropriateness of selected ingredients for improving solubility as well as loading of lamotrigine in microparticles for its sustained and effective delivery.

Formulation of Extended-Release Beads of Lamotrigine Based on Alginate and Cassia fistula Seed Gum by QbD Approach.

AIM: This study was focused on the formulation of the multi-unit extended-release peroral delivery device of lamotrigine for better management of epilepsy. BACKGROUND: The single-unit extended-release peroral preparations often suffer from all-or-none effect. A significant number of multi-unit delivery systems have been reported as a solution to this problem. But most of them are found to be composed of synthetic, semi-synthetic or their combination having physiological toxicity as well as negative environmental impact. Therefore, fabrication and formulation of multi-unit extended-release peroral preparations with natural, non-toxic, biodegradable polymers employing green manufacturing processes are being appreciated worldwide. OBJECTIVE: Lamotrigine-loaded extended-release multi-unit beads have been fabricated with the incorporation of a natural polysaccharide Cassia fistula seed gum in calcium-cross-linked alginate matrix employing a simple green process and 23 full factorial design. METHODS: The total polymer concentration, polymer ratio and [CaCl2] were considered as independent formulation variables with two different levels of each for the experiment-design. The extended-release beads were then prepared by the ionotropic gelation method using calcium chloride as the crosslinkerions provider. The beads were then evaluated for drug encapsulation efficiency and drug release. ANOVA of all the dependent variables such as DEE, cumulative % drug release at 2h, 5h, 12h, rate constant and dissolution similarity factor (f2) was done by 23 full factorial design using Design-Expert software along with numerical optimization of the independent variables in order to meet USP-reference release profile. RESULTS: The optimized batch showed excellent outcomes with DEE of 84.7 ± 2.7 (%), CPR2h of 8.41± 2.96 (%), CPR5h of 36.8± 4.7 (%), CPR12h of 87.3 ± 3.64 (%) and f2 of 65.9. CONCLUSION: This approach of the development of multi-unit oral devices utilizing natural polysaccharides might be inspiring towards the world-wide effort for green manufacturing of sustained-release drug products by the QbD route.

Structure and electronic spectra of neutral and protonated forms of anticonvulsant drug lamotrigine.

In this work, the geometry, acid-base properties, pKa, electronic spectra, and fluorescence spectrum of anticonvulsant drug lamotrigine (LTG) are investigated with the DFT/TD-DFT method and PCM solvent model. Calculated transition with the B3LYP functional at 295 nm corresponds to experimental absorption transition at 306 nm in water. In acidic conditions, the computed maximum transition occurs at 249 nm, comparing with experimental one at 270 nm. The dependence of calculated transitions on density functional used and different solvents in PCM model was studied. The computed transition of fluorescence is at 435 nm, while experimental occurs at 370 nm. Maps of electrostatic potential (MEPs) for S0 and S1 reveal that the ground state of LTG is more polar than the first excited state. Structurally, in the excited state of LTG, the triazine ring is noticeably distorted. Graphical Abstract Molecular elecrostatic potentials for S0 and S1 states of the lamotrigine molecule.

Lamotrigine: Design and synthesis of new multicomponent solid forms.

In this work, a crystal engineering and thermodynamic based approach has been used aiming at contributing to a deeper knowledge of lamotrigine multicomponent solid forms. Two types of co-molecules have been chosen that can give rise to co-crystals with lamotrigine through different supramolecular heterosynthons: the xanthines, theophylline and caffeine, and the three isomeric pyridinecarboxamides. Association with diflunisal, which may result in a salt, was also investigated. Mechanochemistry, differential scanning calorimetry, thermogravimetry, X-ray powder and single crystal diffraction, infrared spectroscopy were the methods used. For all the systems, exploratory neat mechanochemistry experiments, carried out on lamotrigine + co-molecule binary mixtures of different compositions, were not successful in promoting association. From differential scanning calorimetry data and the binary solid-liquid phase diagrams, co-crystals/salts were identified as well as their respective stoichiometry, and a methodology of synthesis was established. For pyridinecarboxamides, molecular recognition is dependent on the position of the amide group in the pyridine ring: co-crystallization did not occur with picolinamide co-former. Both xanthines form co-crystals with lamotrigine, (1:1) with theophylline and (2:1) lamotrigine:caffeine. Additionally, the crystalline structure of a lamotrigine:theophylline 1:1 monohydrate was solved. The (1:1) lamotrigine:theophylline co-crystal converts to this monohydrate in accelerated stability tests. A (1:1) lamotrigine:diflunisal salt was identified, which proved to be stable in accelerated stability assays.

Lamotrigine encapsulated intra-nasal nanoliposome formulation for epilepsy treatment: Formulation design, characterization and nasal toxicity study.

The purpose of this study was to develop lamotrigine nanoliposomes (LTG-NLs) for the treatment in seizures. The formulation was prepared using thin film hydration and rehydration method using the phospholipon 90 G, cholesterol and tween 80 as main ingredients. The nanoliposomes were optimized by plucket burman design (PBD) and response surface methodology (RSM) optimization techniques. The optimized LTGNLopt was further characterized for surface morphology, in-vitro release, stability study, confocal laser scanning microscopic (CLSM) study and naso toxicity study. The results showed that LTGNLopt shown nano size with high entrapment and drug release. The ex-vivo permeation study and confocal laser microscopy study confirmed the enhancement in permeation across the goat nasal mucosa. From the study, it was concluded that the independent variables used to optimize the NLs shown significant effect on the dependent variables and consider effective lipid carrier system for intranasal delivery.

Definition and validation of the Design Space for co-milled nasal powder containing nanosized lamotrigine.

OBJECTIVE: Design of Experiment (DoE), that is a tool of Quality by Design (QbD) paradigm, with which experiments can be planned more effectively and provide more information, while after Design Space (DS) can be set up, which assure the quality of the desired product. The aim of this study was to find the optimal drug-excipient ratio and the optimal process parameters (milling time, milling speed) of our previously used dry co-milling method and validate the DS. MATERIALS AND METHODS: Lamotrigine (LAM), an antiepileptic drug was used as a model API. Poly-vinyl alcohol (PVA) was chosen according to our previous study as a hydrophylic matrix polymer. Milling time, speed, and the API:additive ratio was varied to find out their effect on the product. The optimization was performed on particle size of LAM, its standard deviation and the in vitro dissolution of the samples. Response surface modeling completed the statistical analysis that assessed the effects of independent variables on the responses. RESULTS: Due to the DS estimation, a more economical sample preparation method was set up. Finally, the sample that was prepared according to the optimized parameters (1.5 h, 400 rpm, 0.8 PVA:LAM ratio) showed around 100 nm drug particles and 97% drug release in five minutes. CONCLUSION: From the DS generated by the software, an optimal formulation was obtained and the results validated the experimental design. The QbD approach was a useful and effective tool of understanding the parameters that affect the quality of the desired product.

The anti-epileptic drug lamotrigine inhibits the CYP17A1 lyase reaction in vitro.

The potential endocrine disrupting effects of the commonly prescribed anti-epileptic drug lamotrigine (LAM) were investigated using the H295R steroidogenic in vitro assay and computational chemistry methods. The H295R cells were exposed to different concentrations of LAM, and a multi-steroid LC-MS/MS method was applied to quantify the amount of secreted steroid hormones. LAM affected several steroid hormones in the steroidogenesis at therapeutic concentrations. All progestagens as well as 11-deoxycorticosterone and corticosterone increased 100-200% with increasing concentrations of LAM suggesting a selective inhibitory effect of LAM on CYP17A1, in particular on the lyase reaction. Recombinant CYP17A1 assay confirmed the competitive inhibition of LAM toward the enzyme with IC50 values of 619 and 764 µM for the lyase and the hydroxylase reaction, respectively. Levels of androstenedione and testosterone decreased at LAM concentrations above the therapeutic concentration range. The ability of LAM to bind to CYP17A1, CYP19A1, and CYP21A2 was investigated using docking and molecular dynamics simulations. This in silico study showed that LAM was able to bind directly to the heme iron in the active site of CYP17A1, but not CYP21A2, thus supporting the results of the in vitro studies. The molecular dynamics simulations also suggested binding of LAM to the heme iron in the CYP19A1 active site. No inhibition of the aromatase enzyme was, however, observed in the H295R assay. This could be due to a sequential effect within the steroidogenesis caused by the inhibition of CYP17A1, which reduced the amounts of androgens available for CYP19A1.