Wood inspired biobased nanocomposite films composed of xylans, lignosulfonates and cellulose nanofibers for active food packaging.

The growing concerns on environmental pollution and sustainability have raised the interest on the development of functional biobased materials for different applications, including food packaging, as an alternative to the fossil resources-based counterparts, currently available in the market. In this work, functional wood inspired biopolymeric nanocomposite films were prepared by solvent casting of suspensions containing commercial beechwood xylans, cellulose nanofibers (CNF) and lignosulfonates (magnesium or sodium), in a proportion of 2:5:3 wt%, respectively. All films presented good homogeneity, translucency, and thermal stability up to 153 °C. The incorporation of CNF into the xylan/lignosulfonates matrix provided good mechanical properties to the films (Young's modulus between 1.08 and 3.79 GPa and tensile strength between 12.75 and 14.02 MPa). The presence of lignosulfonates imparted the films with antioxidant capacity (DPPH radical scavenging activity from 71.6 to 82.4 %) and UV barrier properties (transmittance ≤19.1 % (200-400 nm)). Moreover, the films obtained are able to successfully delay the browning of packaged fruit stored over 7 days at 4 °C. Overall, the obtained results show the potential of using low-cost and eco-friendly resources for the development of sustainable active food packaging materials.

Sodium lignosulfonate/graphene composites for efficient desalination by incorporating CoS to control pore size.

The phenomenon of overlapping double layers due to micropores inhibits capacitive deionization performance, which is improved by increasing the pore size. In this study, a novel ternary composite electrode (sodium lignosulfonate/reduced graphene oxide/cobalt sulfide, LGC) was designed using a two-step hydrothermal method. CoS with high pseudocapacitance modifies sodium lignosulfonate and graphene connected by hydrogen bonding, benefiting from the constitutive steric structure. The electrochemical performance was significantly enhanced, and the desalination capacity substantially improved. The LGC electrode specific capacitance was as high as 354.47 F g-1 at a 1 A g-1 current density. The desalination capacity of the capacitive deionization device comprising LGC and activated carbon in 1 M NaCl electrolyte reached 28.04 mg g-1 at an operating condition of 1.2 V, 7 mL min-1. Additionally, the LGC electrodes degraded naturally post the experiment by simply removing the CoS, suggesting that the LGC composites are promising material for capacitive deionization electrodes.

Oleic acid decorated kraft lignin as a hydrophobic and functional filler of cellulose acetate films.

The packaging industry has primarily been dominated by single-use, petrochemical-sourced plastic materials despite their short-term use. Their leakage into the ecosystem after their use poses substantial environmental concerns. As a result, compostable and renewable packaging material alternatives are garnering significant attention. Cellulose acetate is a derivative of cellulose that exhibits excellent tensile properties, transparency, melt processability, and intermediate compostability. However, its application in the food packaging industry is limited due to its hygroscopic behavior and lack of dimensional stability. This study investigated using lignin (pristine and esterified) as a functional additive of cellulose acetate. The effect of varying concentrations of pristine kraft and oleic acid functionalized lignin in the cellulose acetate matrix and its effect on the resulting film's mechanical, morphological, viscoelastic, and water barrier properties were explored. Comprehensive characterization of the thermomechanical processed lignin-cellulose acetate sheets revealed reduced moisture absorption, improved UV and moisture barrier, and enhanced tensile properties with melt processability. Overall, the studied films could have appealing properties for food and other packaging applications, thus, serving as eco-friendly and sustainable alternatives to conventional petroleum-derived packing materials.

Promotion of levoglucosan production from biomass pyrolysis by hydrogen peroxide pre-oxidation.

Due to the complexity of biomass structures, the conversion of raw biomass into value-added chemicals is challenging and often requires efficient pretreatment of the biomass. In this paper, a simple and green pre-oxidation method, which was conducted under the conditions of 2 wt% H2O2, 80 min, and 150 °C, was reported to significantly increase the production of levoglucosan (LG) from biomass pyrolysis. The result showed that the LG yield significantly increased from 2.3 wt% (without pre-oxidation) to 23.1 wt% when pine wood was employed as a sample for pyrolysis at 400 °C, resulting from the removal of hemicellulose fraction and the in-situ acid catalysis of lignin carboxyl groups formed during the pre-oxidation. When the conditions for pre-oxidation became harsher than the above, the LG yield reduced because the decomposition of cellulose fraction in biomass. The study supplies an effective method for utilization of biomass as chemicals.

Optimization and characterization of laccase (LccH) produced by Hexagonia hirta MSF2 in solid-state fermentation using coir pith wastes (CPW).

The accumulation of coir pith waste, a byproduct of coconut husk processing, poses environmental and logistical challenges. An innovative and sustainable solution involves using coir pith as a substrate for solid-state fermentation (SSF). In SSF, coir pith can be converted into valuable products, such as enzymes, organic acids, and bioactive compounds. The present study aimed to evaluate laccase production by Hexagonia hirta MSF2 through SSF using the coir pith waste as substrate. Physico-chemical parameters like moisture, pH, temperature, C source, N source, and CuSO4 concentrations were pre-optimized, and optimized through RSM. Laccase activity of 1585.24 U g-1 of dry substrate was recorded by H. hirta MSF2 on coir pith containing 1 % C source, 0.5 % N source, 0.25 mM of CuSO4 concentration, moisture content of 75 % at pH 4.6 and temperature 28 °C. Subsequently, the enzyme extraction parameters including, extraction buffer, mode of extraction, and temperature were optimized. The molecular weight of laccase was 66 kDa as observed by SDS-PAGE and native-PAGE. The optimum activity of partially purified laccase was achieved at 40 °C, and pH 4.0. Increasing salt concentration and use of different inhibitors affected the laccase activity. Organic solvents like dimethyl sulphoxide (DMSO) and methanol, and metal ions like BaCl2, CaCl2, CuSO4, and MnCl2 stimulated the laccase activity. Hence, coir pith used in SSF offers a dual benefit of waste management and enzyme synthesis through an eco-friendly and cost-effective approach.

Effects of irrigation scheduling on the yield and irrigation water productivity of cucumber in coconut coir culture.

Optimum irrigation scheduling is important for ensuring high yield and water productivity in substrate-cultivated vegetables and is determined based on information such as substrate water content, meteorological parameters, and crop growth. The aim of this study was to determine a precise irrigation schedule for coconut coir culture in a solar greenhouse by comparing the irrigation, evapotranspiration (ET), substrate water content (VWC), as well as the crop growth indices and yield of cucumber, and irrigation water productivity (IWP) under three irrigation schedules: the soil moisture sensor-based method (T-VWC), the accumulated radiation combined with soil moisture sensor-based method (Rn-VWC), and the crop evapotranspiration estimated method using the hourly PM-ETo equation with an improved calculation of Kc (T-ETc). The results showed that the daily irrigation and evapotranspiration amount were the highest under T-VWC treatment, while the lowest under T-ETc treatment. In different meteorological environments, the change in irrigation amount was more consistent with the ET,and the VWC was relatively stable in T-ETc treatment compared with that under T-VWC or Rn-VWC treatments. The plant height, leaves number, leaf area, and stem diameter of T-VWC and Rn-VWC treatments were higher than those of the T-ETc treatments, but there was no significant difference in cucumber yield. Compared with the T-VWC treatment, total irrigation amount under Rn-VWC and T-ETc treatments significantly decreased by 25.75% and 34.04%, respectively ([Formula: see text]). The highest IWP values of 25.07 kg m[Formula: see text] was achieved from T-ETc treatment with significantly increasing by 44.33% compared to the T-VWC treatment (17.37 kg m[Formula: see text]). In summary, the T-ETc treatment allowed more reasonable irrigation management and was appropriate for growing cucumber in coconut coir culture.

Photothermal controlled-release microcapsule pesticide delivery systems constructed with sodium lignosulfonate and transition metal ions: construction, efficacy and on-demand pesticide delivery.

BACKGROUND: Widespread application of controlled-release pesticide delivery systems is a feasible and effective method to improve the utilization efficiency of pesticides. However, owing to the high cost and complicated preparation technologies of controlled-release pesticide delivery systems, their applications in agricultural production have been seriously hindered. RESULTS: This study aimed to construct inexpensive photothermally controlled-release pesticide delivery systems using chitosan (CS) and sodium lignosulfonate (LS) as the wall materials, and a coordination assembly strategy of LS with transition metal ions to encapsulate a model pesticide, avermectin (AVM). The resulting complex or nanoparticle photothermal layers in these systems effectively achieved photothermal conversions, and replaced the use of common photothermal agents. In the prepared pesticide-delivery systems, two systems had remarkable photothermal conversion performance and photothermal stabilities with a photothermal conversion efficiency (η) of 24.03% and 28.82%, respectively, under 808 nm, 2 W near-infrared irradiation. The slow-release and ultraviolet-shielding performance of these two systems were markedly enhanced compared with other formulations. The insecticidal activities of these two systems against Plutella xylostella under irradiation with light-emitting diode (LED)-simulated sunlight were also enhanced by 5.20- and 5.06-fold, respectively, compared with that without irradiation of LED-simulated sunlight. CONCLUSION: Because of their convenient preparations, inexpensive and renewable raw materials, and excellent photothermally controlled-release performance, these on-demand pesticide delivery systems might have significant potential in improving the utilization efficiency of pesticides in modern agriculture. © 2024 Society of Chemical Industry.

Evaluating the mechanism of soybean meal protein for boosting the laccase-catalyzed of thymol onto lignosulfonate via restraining non-specific adsorption.

The control of laccase-catalyzed efficiency often relies on the utilization of modifying enzyme molecules and shielding agents. However, their elevated costs or carcinogenicity led to the inability for large-scale application. To address this concern, we found that a low-cost protein from soybean meal can reduce lignin's ineffective adsorption onto enzymes for improving the efficiency of thymol grafting to lignosulfonate. The results demonstrated that by adding 0.5 mg/mL of additional soybean meal protein, the thymol reaction ratio of the modified lignosulfonate (L-0.5 S) significantly boosted from 18.1 % to 35.0 %, with the minimal inhibitory concentrations of the L-0.5 S against Aspergillus niger dramatically improved from 12.5 mg/mL to 3.1 mg/mL. Multiple characterization methods were employed to better understand the benefit of the modification under the addition of the soybean meal protein. The CO and R1-O group content increased from 20.5 % to 37.8 % and from 65.1 % to 75.5 %, respectively. The proposed potential reaction mechanism was further substantiated by the physicochemical properties. The incorporation of soybean meal effectively mitigated the non-specific adsorption of lignosulfonate, resulting in a reduction of the surface area of lignin from 235.0 to 139.2 m2/g. The utilization of soybean meal as a cost-effective and efficient shielding agent significantly enhanced the efficiency of subsequent enzyme catalysis. Consequently, the application of soybean meal in commercial enzyme catalysis holds considerable appeal and amplifies the relevance of this study in preservative industries.

Environmental applications of lignin-based hydrogels for Cu remediation in water and soil: adsorption mechanisms and passivation effects.

Heavy metal pollution, particularly the excessive release of copper (Cu), is an urgent environmental concern. In this study, sodium lignosulfonate/carboxymethyl sa-son seed gum (SL-Cg-g-PAA) designed for remediation of Cu-contaminated water and soil was successfully synthesized through a free radical polymerization method using lignin as a raw material. This hydrogel exhibits remarkable Cu adsorption capability when applied to water, with a maximum adsorption capacity reaching 172.41 mg/g. Important adsorption mechanisms include surface complexation and electrostatic attraction between Cu(Ⅱ) and oxygen-containing functional groups (-OH, -COOH), as well as cation exchange involving -COONa and -SO3Na. Furthermore, SL/Cg-g-PAA effectively mitigated the bioavailability of heavy metals within soil matrices, as evidenced by a notable 14.1% reduction in DTPA extracted state Cu (DTPA-Cu) content in the S4 treatment (0.7% SL/Cg-g-PAA) compared to the control group. Concurrently, the Cu content in both the leaves and roots of pakchoi exhibited substantial decreases of 55.19% and 36.49%, respectively. These effects can be attributed to the precipitation and complexation reactions facilitated by the hydrogel. In summary, this composite hydrogel is highly promising for effective remediation of heavy metal pollution in water and soil, with a particular capability for the immobilization of Cu(Ⅱ) and reduction of its adverse effects on ecosystems.

Crystallization-induced formation of two-dimensional carbon nanosheets derived from sodium lignosulfonate for fast lithium storage.

Sodium lignosulfonate, an abundant natural resource, is regarded as an ideal precursor for the synthesis of hard carbon. The development of high-performance, low-cost and sustainable anode materials is a significant challenge facing lithium-ion batteries (LIBs). The modulation of morphology and defect structure during thermal transformation is crucial to improve Li+ storage behavior. Synthesized using sodium lignosulfonate as a precursor, two-dimensional carbon nanosheets with a high density of defects were produced. The synergistic influence of ice templates and KCl was leveraged, where the ice prevented clumping of potassium chloride during drying, and the latter served as a skeletal support during pyrolysis. This resulted in the formation of an interconnected two-dimensional nanosheet structure through the combined action of both templates. The optimized sample has a charging capacity of 712.4 mA h g-1 at 0.1 A g-1, which is contributed by the slope region. After 200 cycles at 0.2 A g-1, the specific charge capacity remains 514.4 mA h g-1, and a high specific charge capacity of 333.8 mA h g-1 after 800 cycles at 2 A g-1. The proposed investigation offers a promising approach for developing high-performance, low-cost carbon-based anode materials that could be used in advanced lithium-ion batteries.

Sodium alginate/sodium lignosulfonate hydrogel based on inert Ca2+ activation for water conservation and growth promotion.

Soil degradation has become a major global problem owing to the rapid development of agriculture. The problems of soil drought and decreased soil fertility caused by soil degradation severely affect the development of the agricultural and forestry industries. In this study, we designed sodium alginate (SA)/sodium lignosulfonate (SLS) hydrogel based on the activation and crosslinking of inert Ca2+. CaCO3 and SA were mixed, and then, inert Ca2+ was activated to prepare a gel with a stable structure and a uniform interior and exterior. The crosslinking activated by inert Ca2+ enhanced the stability of the hydrogel, and the optimal swelling rate of the hydrogel reached 28.91 g/g, thereby effectively improving the water-holding capacity of the soil (77.6-108.83 g/kg). SLS was degraded into humic acid (HA) and gradually released, demonstrating a positive growth-promoting effect in plant growth experiments. The SA/SLS hydrogel can be used for soil water retention and mitigation to significantly decrease the water loss rate of soil. This study will assist in addressing soil drought and fertility loss.

Deciphering the enzymatic grafting of vanillin onto lignosulfonate for the production of versatile aldehydes-bearing biomaterials.

Modification of lignin plays a crucial role in extending its applications. While chemical functionalization has been extensively applied, exploring the enzyme-catalyzed approach for grafting phenolic molecules presents a promising avenue. Herein, we investigate the controlled laccase-mediated grafting of vanillin onto lignosulfonates (LS) as a sustainable approach to introduce aldehydes into LS, paving the way for further (bio)chemical functionalizations (e.g., reductive amination and Knoevenagel-Doebner condensations). The resulting vanillin-grafted LS is comprehensively characterized (HPLC, SEC, Pyrolysis-GC/MS, FTIR). The study reveals four key steps in the grafting process: (i) vanillin acts as a mediator, generating the phenoxyl radical that initiates LS oxidation, (ii) the oxidation leads to depolymerization of LS, resulting in a decrease in molecular weight, (iii) rearrangement in the vanillin-grafted LS, evidenced by the replacement of labile bonds by stronger 5-5 bonds that resist to pyrolysis, and (iv) if the reaction is prolonged after complete consumption of vanillin, condensation of the vanillin-grafted LS occurs, leading to a significant increase in molecular weight. This study provides valuable insights on the behavior of vanillin and LS throughout the process and allows to identify the optimal reaction conditions, thereby enhancing the production of vanillin-grafted LS for its subsequent functionalization.

Multifunctional sodium lignosulfonate/xanthan gum/sodium alginate/polyacrylamide ionic hydrogels composite as a high-performance wearable strain sensor.

Recently, conductive hydrogels have shown great promise in flexible electronics and are ideal materials for the preparation of wearable strain sensors. However, developing a simple method to produce conductive hydrogels with excellent mechanical properties, self-adhesion, transparency, anti-freezing, and UV resistance remains a significant challenge. A novel sodium lignosulfonate/xanthan gum/sodium alginate/polyacrylamide/Zn2+/DMSO (SLS/XG/SA/PAM/Zn2+/DMSO) ionic conductive hydrogel was developed using a one-pot method. The resulting ionic conductive hydrogels have excellent mechanical properties (stress: 0.13 MPa, strain: 1629 %), high anti-fatigue properties, self-adhesion properties (iron: 7.37 kPa, pigskin: 4.74 kPa), anti-freezing (freezing point: -33.49 °C) and UV resistance by constructing a chemical and physical hybrid cross-linking network. In particular, the conductivity of G hydrogel reached 6.02 S/m at room temperature and 5.52 S/m at -20 °C. Thus, the hydrogel was assembled into a flexible sensor that could distinguish a variety of large and small scales human movements, such as joint bending, swallowing and speaking in real time with high stability and sensitivity. Moreover, the hydrogel could be used as electronic skin just like human skin and touch screen pen to write.

Sodium lignosulfonate causes cell membrane perturbation in the human fungal pathogen Candida albicans.

Underestimating fungal infections led to a gap in the development of antifungal medication. However, rising rates of morbidity and mortality with fungal infection have revealed an alarming rise in antifungal resistance also. Due to the eukaryotic properties of fungi and the close evolutionary similarity between fungal cells and human hosts, therapeutic targeting of Candida infections is troublesome, along with the development of resistance. The discovery of new antifungals is so far behind schedule that the antifungal pipeline is nearly empty. Previously, we have reported the activity and susceptibility of Sodium lignosulfonate (LIG) against C. albicans. In this work, we have established the mechanistic actions of LIG's activity. We performed flow cytometric analysis for membrane integrity, ergosterol binding assay, crystal violet assay, and membrane leakage assay to analyze quantitatively that the C. albicans membrane is being disrupted in response to LIG. Electron microscopic analysis with SEM and TEM confirmed changes in Candida cellular morphology and membrane perturbation respectively. These findings indicated that LIG causes cell membrane damage in C. albicans. This knowledge about LIG's mechanism of action against C. albicans could be used to explore it further as a lead antifungal molecule to develop it as a potent candidate for antifungal therapeutics in the future.

Comprehensive Evaluation of Polyaniline-Doped Lignosulfonate in Adsorbing Dye and Heavy Metal Ions.

Lignosulfonate/polyaniline (LS/PANI) nanocomposite adsorbent materials were prepared by the chemical polymerization of lignosulfonate with an aniline monomer as a dopant and structure-directing agent, and the adsorption behavior of dyes as well as heavy metal ions was investigated. LS/PANI composites were used as dye adsorbents for the removal of different cationic dyes (malachite green, methylene blue, and crystal violet). The adsorption behavior of LS/PANI composites as dye adsorbents for malachite green was investigated by examining the effects of the adsorbent dosage, solution pH, initial concentration of dye, adsorption time, and temperature on the adsorption properties of this dye. The following conclusions were obtained. The optimum adsorption conditions for the removal of malachite green dye when LS/PANI composites were used as malachite green dye adsorbents were as follows: an adsorbent dosage of 20 mg, an initial concentration of the dye of 250 mg/L, an adsorption time of 300 min, and a temperature of 358 K. The LS/PANI composite adsorbed malachite green dye in accordance with the Langmuir adsorption model and pseudo-second-order kinetic model, which belongs to chemisorption-based monomolecular adsorption, and the equilibrium adsorption amount was 245.75 mg/g. In particular, the adsorption of heavy metal ion Pb2+ was investigated, and the removal performance was also favorable for Pb2+.

Analysis of the thermoelectrical performance of samples made of Coir Agricultural Wastes combined with MWCNT.

A biomaterial made of coir and Multi-Walled Carbon Nanotubes (MWCNTs) is presented which exhibits a relatively high-Temperature Coefficient of Resistance (TCR) and thermal insulation properties. Bolometers usually offer acceptable thermal isolation, electrical resistance, and high TCR. Fibers from agricultural waste materials such as coir has a synergistic effect as thermal insulating material and noise reducer. Based on it, powdered coir pills were used as pilot samples, as well as 2 other samples with different dispersions of MWCNTs, sodium dodecyl benzene sulfonate (SDBS) and polyvinylpyrrolidone (PVP) solution. The 3 kinds of samples were thermo-electrically characterized to determine their bolometric performance. Thermal conductivity of k = 0.045 W/m K was obtained by solving the Fourier's law substituting the data into the equation describing heat flux on the sample around room temperature. Results show that adding different concentrations of MWCNT to powdered coir will lead to films with lower electrical resistance, therefore the thermal conductivity increases while thermal resistance decreases. Finally, the bolometric performance shows a maximum peak with a relatively high TCR of - 40.4% at a temperature of 300.3 K, this synthesized material outperforms by almost 1 order of magnitude larger than commercial materials. Results in this work also indicate that it is possible to tune bolometric parameters of this kind of samples and to use them as thermal insulators in the construction industry, when building roofs and walls.

Exploration of rumen microbial and carbohydrate-active enzyme profiles in cattle fed coir a lignin-rich diet using a metagenomic approach.

Lignocellulosic biomass is a rich source of feed for cattle. Amongst them, coconut coir may be the potential source of feed supplements. To assess, the effect of various concentrations of coconut coir (0 %, 21 % and 40 %) as a feed supplement on the rumen microbiome of cattle (Kankrej breed), a metagenomic (16S rRNA gene amplicon and shotgun sequencing) study was performed. The Alpha diversity estimation from the amplicon study suggested that the group of cattle fed food without the coconut coir has a higher number of genera than the cattle fed with mixed ration. Within the liquid fraction, bacterial phyla Bacteroidetes were abundant followed by Firmicutes and Fibrobacteres, whereas the proportion of Tenericutes, TM7, SRI, Verrucomicrobia, Lentisphaerae, and Elusimicrobia had decreased with the rise in the coir concentration. While within the solid fractions, the proportion of Elusimicrobia increased, but the count of Bacteriodetes, Firmicutes, Fibrobacteres Tenericutes, TM7, SRI, Verrucomicrobia, and Lentisphaerae decreased with an increase in coir percentages. The results obtained from shotgun sequencing show similar results for bacterial diversity. The functions associated with carbohydrate metabolism were abundant in both the treatments as compared to the control. Functions related to glycoside hydrolases, glycosyltransferases and carbohydrate-binding modules were abundant in both the treatments as compared to control. Thus, the study indicates that the microbiome does alter after feeding coir as a supplement and may be used as feed for cattle.

Facile synthesis of Cu NPs@Fe3O4-lignosulfonate: Study of catalytic and antibacterial/antioxidant activities.

Environmental pollution is one of the important concerns for human health. There are different types of pollutants and techniques to eliminate them from the environment. We hereby report an efficient method for the remediation of environmental contaminants through the catalytic reduction of the selected pollutants. A green method has been developed for the immobilization of copper nanoparticles on magnetic lignosulfonate (Cu NPs@Fe3O4-LS) using the aqueous extract of Filago arvensis L. as a non-toxic reducing and stabilizing agent. The characterization of the prepared Cu NPs@Fe3O4-LS was achieved by vibrating sample magnetometer (VSM), Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), high resolution TEM (HRTEM), X-ray diffraction (XRD), scanning TEM (STEM), thermogravimetry-differential thermal analysis (TG/DTA), fast Fourier transform (FFT), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron (XPS) analyses. The synthesized Cu NPs@Fe3O4-LS was applied as a magnetic and green catalyst in the reduction of congo red (CR), 4-nitrophenol (4-NP), and methylene blue (MB). The progress of the reduction reactions was monitored by UV-Vis spectroscopy. Finally, the biological properties of Cu NPs@Fe3O4-LS were investigated. The prepared catalyst demonstrated excellent catalytic efficiency in the reduction of CR, 4-NP, and MB in the presence of sodium borohydride (NaBH4) as the reducing agent. The appropriate magnetism of Cu NPs@Fe3O4-LS made its recovery very simple. The advantages of this process include a simple reaction set-up, high and catalytic antibacterial/antioxidant activities, short reaction time, environmentally friendliness, high stability, and easy separation of the catalyst. In addition, the prepared Cu NPs@Fe3O4-LS could be reused for four cycles with no significant decline in performance.

Preparation of uniform lignosulfonate-based colloidal spheres for UV-absorbing thermoplastics.

Lignosulfonate-based colloidal spheres were prepared from sodium lignosulfonate and cetyltrimethylammonium bromide (NaLS/CTAB) complex through electrostatic and hydrophobic self-assembly. Due to the stronger hydrophobicity and UV-blocking performance, NaLS/CTAB colloids were easier to be blended with HDPE than lignosulfonate, and therefore applied to UV-absorbing thermoplastics. Results showed NaLS/CTAB colloidal spheres had a particle size of 160 nm with a polydispersity index of 0.081. NaLS/CTAB molecules started to form spheres at critical water content of 64 vol% when the initial concentration of NaLS/CTAB in EtOH was 0.5 mg/cm3 and the obtaining of colloids was completed at a water content of 90 vol%. The size and polydispersity of spheres were well controlled by adjusting initial concentrations of NaLS/CTAB in EtOH. Since NaLS/CTAB colloidal spheres retained phenylpropane units and phenolic hydroxyl groups of NaLS, NaLS/CTAB/HDPE composites displayed excellent UV-absorbing properties. Meanwhile, the mechanical property of NaLS/CTAB/HDPE composites was also superior to that of frequently-used CaCO3/HDPE materials in industry, reaching the requirement of industrial uses. However, too high additions would result in the increased agglomeration of NaLS/CTAB spheres in HDPE, and thus the deteriorated mechanical property. Additionally, the added spheres played a role of "ball", which caused the decreased viscosity, improved flowability and processability of composites.

Simultaneously reinforcing and toughening of shape-memory epoxy resin with carboxylated lignosulfonate: Facile preparation and effect mechanism.

To improve the compatibility and reactivity of lignosulfonate (LS) with epoxy oligomers, the LS was firstly functionalized with anhydride via the carboxylation reaction. The carboxylated lignosulfonate (CLS) reinforced epoxy resin with excellent mechanical and shape memory performance was prepared facilely via distributing the CLS into the combined epoxy monomers of DGEBA and PEGDGE with the aid of water, rather than using the normal organic solvents. The incorporated CLS promoted the curing reaction of epoxy resin. A typical sea-island structure was formed in the cured sample at the CLS content of 5 phr, exhibiting the highest increases in tensile strength, modulus, elongation at break and toughness by 23.8 %, 18.2 %, 217 % and 113 %, respectively, relative to neat epoxy. Interestingly, the incorporation of CLS at a proper amount led to the simultaneous strengthening and toughing effects on cured epoxy resin, which could be attributed to the rigid structure of CLS covalently introduced in the epoxy resin network and the heterogeneous structure formed in the epoxy matrix. The rigid CLS component also restrained the movement of chain segments, consequently, the mechanical stability was enhanced and the fast shape recovery rate of epoxy resin network was slowed down to some extent.