Magnetic nanowires in biomedical applications.

Magnetic nanostructures and nanomaterials play essential roles in modern bio medicine and technology. Proper surface functionalization of nanoparticles (NPs) allows the selective bonding thus application of magnetic forces to a vast range of cellular structures and biomolecules. However, the spherical geometry of NPs poises a series of limitations in various potential applications. Mostly, typical spherical core shell structure consists of magnetic and non-magnetic layers have little tunability in terms of magnetic responses, and their single surface functionality also limits chemical activity and selectivity. In comparison to spherical NPs, nanowires (NWs) possess more degrees of freedom in achieving magnetic and surface chemical tenability. In addition to adjustment of magnetic anisotropy and inter-layer interactions, another important feature of NWs is their ability to combine different components along their length, which can result in diverse bio-magnetic applications. Magnetic NWs have become the candidate material for biomedical applications owing to their high magnetization, cheapness and cost effective synthesis. With large magnetic moment, anisotropy, biocompatibility and low toxicity, magnetic NWs have been recently used in living cell manipulation, magnetic cell separation and magnetic hyperthermia. In this review, the basic concepts of magnetic characteristics of nanoscale objects and the influences of aspect ratio, composition and diameter on magnetic properties of NWs are addressed. Some underpinning physical principles of magnetic hyperthermia (MH), magnetic resonance imaging (MRI) and magnetic separation (MS) have been discussed. Finally, recent studies on magnetic NWs for the applications in MH, MRI and MS were discussed in detail.

Comparison of magnetic field distributions generated by various permanent magnets for transcranial static magnetic stimulation: A simulation study.

Recent experimental studies have shown that static magnetic field can be effective in modulating human brain functions. Following this discovery, a new noninvasive brain stimulation technique was developed: the transcranial static magnetic stimulation (tSMS). Various types of permanent magnets have been used in previous experimental studies, with the aim of validating the effectiveness of tSMS; nevertheless, the spatial distributions of magnetic field generated by these permanent magnets have not been fully investigated. In this study, we compared the distributions of magnetic field on the human cortical surface generated by five different cylindrical magnets (of various dimensions), using the finite element method. Our simulation results demonstrated that the magnitude of magnetic flux density induced in the cortical grey matter of the human brain is proportional to the volume of permanent magnets used, while the magnetic field gradient is not necessarily proportional to the volume of the magnets. Additionally, we showed that the use of magnets with internal holes might not be advantageous. The differences in magnetic field properties induced by various types of permanent magnets suggested that their careful selection, based on magnetic field simulations, might be necessary to increase the effectiveness of tSMS.

Tracking the occurrence of anthropogenic magnetic particles and potentially toxic elements (PTEs) in house dust using magnetic and geochemical analyses.

The influence of anthropogenic outdoor sources on the geochemical composition of house dust material in large cities is poorly understood. In this study, we investigate the magnetic signature and the concentrations of potentially toxic elements (PTEs) in randomly selected house dust samples from the metropolitan area of Athens, the most populated city in Greece. Environmental magnetic measurements, including isothermal remanent magnetization and thermomagnetism, indicated that the main magnetic mineral is coarse-grained low-coercivity magnetite. Detailed microscopic observations of the magnetically extracted material revealed the presence of three different kinds of Fe-rich particles deriving from both combustion-related and non-exhaust vehicular sources: irregularly-shaped grains and spherules of Fe-oxides, and particles consisting of metallic Fe. Further study of the morphology of single anthropogenic magnetic spherules (size > 30 µm) identified the presence of magnetite spherical particles, typically formed by industrial combustion processes. Enrichment factors (EFs) for the PTEs calculated against the Athens urban soil showed that the house dusts were very highly enriched in Cd, Cu, Zn and significantly enriched in Pb (median EF values of 34.1, 26.2, 25.4 and 10.3, respectively). The oral bioaccessibility of PTEs in the house dust, evaluated using a simulated gastric solution (0.4 M glycine), was in the order Pb > Zn > Mn > Cd > Ni > Cu > Cr > Fe. Concentrations of Pb increased with the house age. Principal component and cluster analysis demonstrated the close association of anthropogenic Cu, Pb and Zn with the magnetic susceptibility of the house dusts. We conclude that both traffic-related and industrial sources trigger the occurrence of magnetic Fe/PTEs- rich particles in house dust. These results reinforce the use of environmental magnetism determinations for assessing anthropogenic contamination of PTEs in the indoor environment in large cities.

Carbon Nanotubes Filled with Different Ferromagnetic Alloys Affect the Growth and Development of Rice Seedlings by Changing the C:N Ratio and Plant Hormones Concentrations.

The aim of this study was to investigate the phytotoxicity of thin-walled carbon nanotubes (CNTs) to rice (Oryza sativa L.) seedlings. Three different CNTs, including hollow multi-walled carbon nanotubes (MWCNTs), Fe-filled carbon nanotubes (Fe-CNTs), and Fe-Co-filled carbon nanotubes (FeCo-CNTs), were evaluated. The CNTs significantly inhibited rice growth by decreasing the concentrations of endogenous plant hormones. The carbon to nitrogen ratio (C:N ratio) significantly increased in rice roots after treatments with CNTs, and all three types of CNTs had the same effects on the C:N ratio. Interestingly, the increase in the C:N ratio in roots was largely because of decreased N content, indicating that the CNTs significantly decreased N assimilation. Analyses of the Fe and Co contents in plant tissues, transmission electron microscope (TEM) observations and energy dispersive X-ray spectroscopy (EDS) analysis proved that the CNTs could penetrate the cell wall and the cell membrane, and then enter the root cells. According to the author's knowledge, this is the first time to study the relationship between carbon nanotubes and carbon nitrogen ratio and plant hormones.

Magnetic particle characterization-magnetophoretic mobility and particle size.

Quantitative characterization of magnetic particles is useful for analysis and separation of labeled cells and magnetic particles. A particle velocimeter is used to directly measure the magnetophoretic mobility, size, and other parameters of magnetic particle suspensions. The instrument provides quantitative video analysis of particles and their motion. The trajectories of magnetic particles in an isodynamic magnetic field are recorded using a high-definition camera/microscope system for image collection. Image analysis software then converts the image data to the parameters of interest. The distribution of magnetophoretic mobility is determined by combining fast image analysis with velocimetry measurements. Particle size distributions have been characterized to provide a better understanding of sample quality. The results have been used in the development and operation of analyzer protocols for counting particle concentrations accurately and measuring magnetic susceptibility and size for simultaneous display for routine application to particle suspensions and magnetically labeled biological cells. © 2016 International Society for Advancement of Cytometry.

Ordered DNA-Surfactant Hybrid Nanospheres Triggered by Magnetic Cationic Surfactants for Photon- and Magneto-Manipulated Drug Delivery and Release.

Here we construct for the first time ordered surfactant-DNA hybrid nanospheres of double-strand (ds) DNA and cationic surfactants with magnetic counterion, [FeCl3Br](-). The specificity of the magnetic cationic surfactants that can compact DNA at high concentrations makes it possible for building ordered nanospheres through aggregation, fusion, and coagulation. Cationic surfactants with conventional Br(-) cannot produce spheres under the same condition because they lose the DNA compaction ability. When a light-responsive magnetic cationic surfactant is used to produce nanospheres, a dual-controllable drug-delivery platform can be built simply by the applications of external magnetic force and alternative UV and visible light. These nanospheres obtain high drug absorption efficiency, slow release property, and good biocompatibility. There is potential for effective magnetic-field-based targeted drug delivery, followed by photocontrollable drug release. We deduce that our results might be of great interest for making new functional nucleic-acid-based nanomachines and be envisioned to find applications in nanotechnology and biochemistry.

Commercial-scale recycling of NdFeB-type magnets with grain boundary modification yields products with 'designer properties' that exceed those of starting materials.

NdFeB-type magnets dominate the market for high performance magnetic materials, yet production of 'virgin' magnets via mining is environmentally, financially and energetically costly. Hence, interest is growing in 'magnet to magnet' recycling schemes that offer the potential for cheaper, more environmentally-friendly solutions to the world's growing appetite for rare-earth based magnetic materials. Unfortunately, previously described recycling processes only partially capitalise on this potential, because the methods described to date are limited to 'laboratory scale' or operate only under ideal conditions and result in products that fail to recapture the coercivity of the starting, scrap materials. Herein, we report a commercial scale process (120 kg batches) that completely recovers the properties of the starting scrap magnets. Indeed, 'grain boundary modification', via careful addition of a proprietary mix of blended elements, produces magnets with 'designer properties' that can exceed those of the starting materials and can be closely tailored to meet a wide variety of end-user applications, including high-coercivity (>2000 kA/m), sintered magnets suitable for motor applications.

Magnetoelectric 'spin' on stimulating the brain.

AIM: The in vivo study on imprinting control region mice aims to show that magnetoelectric nanoparticles may directly couple the intrinsic neural activity-induced electric fields with external magnetic fields. METHODS: Approximately 10 µg of CoFe2O4-BaTiO3 30-nm nanoparticles have been intravenously administrated through a tail vein and forced to cross the blood-brain barrier via a d.c. field gradient of 3000 Oe/cm. A surgically attached two-channel electroencephalography headmount has directly measured the modulation of intrinsic electric waveforms by an external a.c. 100-Oe magnetic field in a frequency range of 0-20 Hz. RESULTS: The modulated signal has reached the strength comparable to that due the regular neural activity. CONCLUSION: The study opens a pathway to use multifunctional nanoparticles to control intrinsic fields deep in the brain.

Coke industry and steel metallurgy as the source of soil contamination by technogenic magnetic particles, heavy metals and polycyclic aromatic hydrocarbons.

Application of integrated magnetic, geochemical and mineralogical methods for qualitative and quantitative assessment of forest topsoils exposed to the industrial emissions was the objective of this manuscript. Volume magnetic susceptibility (κ) in three areas of southern Poland close to the coke and metallurgical plants was measured directly in the field. Representative topsoil samples were collected for further chemical and mineralogical analyses. Topsoil magnetic susceptibility in the studied areas depended mainly on the content of technogenic magnetic particles (TMPs) and decreased downwind at increasing distance from the emitters. In the vicinity of coking plants a high amount of polycyclic aromatic hydrocarbons (PAHs) was observed, especially the most carcinogenic ones with four- and five-member rings. No significant concentration of TMPs (estimated on the base of κ values) and heavy metals (HM) was observed in area where the coke plant was the only pollution source. In areas with both coke and metallurgical industry, higher amounts of TMPs, PAHs and HM were detected. Morphological and mineralogical analyses of TMPs separated from contaminated soil samples revealed their high heterogeneity in respect of morphology, grain size, mineral and chemical constitution. Pollution load index and toxicity equivalent concentration of PAHs used for soil quality assessment indicated its high level of pollution.

Isolating epidermal growth factor receptor overexpressing carcinoma cells from human whole blood by bio-ferrography.

BACKGROUND: The epidermal growth factor receptor (EGFR) is overexpressed in carcinoma. In some cases, including in colorectal cancer, it is used as a therapeutic target. Bio-Ferrography is a nondestructive method for isolating magnetized cells and tissues from a fluid onto a glass slide based on their interaction with an external, strong, and focused magnetic field. METHODS: Here, we implement Bio-Ferrography to separate EGFR-positive cancer cells from EGFR-negative noncancer cells, mixed at a ratio of 1 to 1 × 10(6) , from either phosphate-buffered saline or human whole blood. Incubation of the cells with an anti-EGFR antibody and magnetic microbeads coupled to a secondary antibody was used to magnetize the target cells prior to the ferrographic analysis. RESULTS: A procedure was developed for "a proof of concept" isolation. Recovery values as high as 78% for 1 mL phosphate-buffered saline, and 53% for 1 mL human whole blood, with a limit-of-detection of 30 and 100 target cells, respectively, were achieved. CONCLUSIONS: These capture efficiency values are considered significant and, therefore, warrant further study on isolation of real circulating tumor cells from blood samples of patients, aiming at early diagnosis of EGFR-overexpressing tumor types.

Innovative fluorescent magnetic albumin microbead-assisted cell labeling and intracellular imaging of glioblastoma cells.

Superparamagnetic nanoparticle-based polymer microbeads utilized as carriers are attractive materials widely applied in the biomedical field. However, the deficiency of toxicity, biocompatibility, and biodegradability for polymer materials often limits the application of these microbeads. In the present study, magnetic albumin microbeads (MAMbs), i.e., human serum albumin-coated γ-Fe2O3 nanoparticles, are synthesized to label human U251 glioblastoma multiforme cells. The effects of MAMbs on the biological behavior of U251 glioblastoma cells, including their proliferation, cell viability, cytoskeletal structure, cell cycle, and apoptosis rate, are investigated. Moreover, fluorescein isothiocyanate (FITC)-MAMbs are fabricated by reaction with fluorescent dye FITC used for intracellular imaging of U251 glioblastoma cells. MAMbs possess undetectable cytotoxicity and excellent biocompatibility with U251 glioblastoma cells, as demonstrated by the biological behavior and morphology of U251 cells exposed to MAMbs. Furthermore, the constructed fluorescent MAMbs allow effective intracellular imaging, as illustrated by fluorescence microscopic analysis. The fabricated fluorescent MAMbs have promising perspectives in biomedical research, especially in cell-targeted labeling and intracellular fluorescence magnetic dual-mode imaging in cancer-targeted diagnosis and therapy.

Intracellular micro-rheology probed by micron-sized wires.

In the last decade, rapid advances have been made in the field of micro-rheology of cells and tissues. Given the complexity of living systems, there is a need for the development of new types of nano- and micron-sized probes, and in particular of probes with controlled interactions with the surrounding medium. In the present paper, we evaluate the use of micron-sized wires as potential probes of the mechanical properties of cells. The wire-based micro-rheology technique is applied to living cells such as murine fibroblasts and canine kidney epithelial cells. The mean-squared angular displacement of wires associated to their rotational dynamics is obtained as a function of the time using optical microscopy and image processing. It reveals a Brownian-like diffusive regime of the form Δψ(2)(t,L) ≈ t/L(3), where L denotes the wire length. This scaling suggests that an effective viscosity of the intracellular medium can be determined, and that in the range 1-10 µm it does not depend on the length scale over which it is measured.

Magnetophoresis at the nanoscale: tracking the magnetic targeting efficiency of nanovectors.

AIM: Most of the research efforts in magnetic targeting have been focused on the development of magnetic nanovectors, while the investigation of methods for tracking their magnetic targeting efficiency remains inappropriately addressed. We propose herein a miniaturized approach for appraising magnetophoretic mobility at the nanoscale. MATERIALS & METHODS: A simple and easy-to-use chamber including a microtip as a magnetic attractor was developed to perform magnetophoretic measurement at the size scale of nano-objects, and under bright field or fluorescence microscopy. Different sets of magnetic nanocontainers were produced and their magnetophoretic mobility was investigated. Real-time observations of the Brownian motion of the nanocontainers were also carried out for simultaneous size determination. RESULTS: Attraction of the nanocontainers at the microtip is demonstrated as a qualitative method that immediately distinguishes magnetically responsive nano-objects. The combination of the analysis of Brownian motion, together with the magnetophoretic mobility, inferred both the size, the magnetophoretic velocity and the magnetic content of the nanocontainers. Additionally, nanomagnetophoresis experiments under fluorescence microscopy provided information on the constitutive core/shell integrity of the nanocontainers and the co-internalization of a fluorescent cargo. CONCLUSION: This nanomagnetophoresis method represents a promising tool to estimate the feasibility of magnetic targeting in laboratory routine.

Non-invasive and high-sensitivity scanning detection of magnetic nanoparticles in animals using high-Tc scanning superconducting-quantum-interference-device biosusceptometry.

Although magnetic nanoparticles (MNPs) have been widely applied to animals in biomedicine, MNPs within animals should be examined in real time, in vivo, and without bio-damaged possibility to evaluate whether the bio-function of MNPs is valid or to further controls the biomedicinal process because of accompanying complex problems such as MNPs distribution and MNPs biodegradation. The non-invasive and high-sensitivity scanning detection of MNPs in animals using ac susceptometry based on a high-T(c) superconducting quantum interference device (SQUID) is presented. The non-invasive results and biopsy results show good agreement, and two gold-standard biomedicine methods, Prussian blue stain and inductively coupled plasma, prove the magnetic results. This confirms that the future clinical diagnosis of bio-functional MNPs could be operated by using scanning SQUID biosusceptometry as conveniently as an ultrasonic probe.

Magnetic properties of nanomagnetic and biomagnetic systems analyzed using cantilever magnetometry.

Magnetic properties of nanomagnetic and biomagnetic systems are investigated using cantilever magnetometry. In the presence of a magnetic field, magnetic films or particles deposited at the free end of a cantilever give rise to a torque on the mechanical sensor, which leads to frequency shifts depending on the applied magnetic field. From the frequency response, the magnetic properties of a magnetic sample are obtained. The magnetic field dependences of paramagnetic and ferromagnetic thin films and particles are measured in a temperature range of 5-320 K at a pressure below 10(-6) mbar. We present magnetic properties of the ferromagnetic materials Fe, Co and Ni at room temperature and also for the rare earth elements Gd, Dy and Tb at various temperatures. In addition, the magnetic moments of magnetotactic bacteria are measured under vacuum conditions at room temperature. Cantilever magnetometry is a highly sensitive tool for characterizing systems with small magnetic moments. By reducing the cantilever dimensions the sensitivity can be increased by an order of magnitude.

Assessment of heavy metal pollution from a Fe-smelting plant in urban river sediments using environmental magnetic and geochemical methods.

Environmental magnetic proxies provide a rapid means of assessing the degree of industrial heavy metal pollution in soils and sediments. To test the efficiency of magnetic methods for detecting contaminates from a Fe-smelting plant in Loudi City, Hunan Province (China) we investigated river sediments from Lianshui River. Both magnetic and non-magnetic (microscopic, chemical and statistical) methods were used to characterize these sediments. Anthropogenic heavy metals coexist with coarse-grained magnetic spherules. It can be demonstrated that the Pollution Load Index of industrial heavy metals (Fe, V, Cr, Mo, Zn, Pb, Cd, Cu) and the logarithm of saturation isothermal remanent magnetization, a proxy for magnetic concentration, are significantly correlated. The distribution heavy metal pollution in the Lianshui River is controlled by surface water transport and deposition. Our findings demonstrate that magnetic methods have a useful and practical application for detecting and mapping pollution in and around modern industrial cities.