Native nanodiscs formed by styrene maleic acid copolymer derivatives help recover infectious prion multimers bound to brain-derived lipids.

Prions are lipidated proteins that interact with endogenous lipids and metal ions. They also assemble into multimers and propagate into the infectious scrapie form known as PrPSc The high-resolution structure of the infectious PrPSc state remains unknown, and its analysis largely relies on detergent-based preparations devoid of endogenous ligands. Here we designed polymers that allow isolation of endogenous membrane:protein assemblies in native nanodiscs without exposure to conventional detergents that destabilize protein structures and induce fibrillization. A set of styrene-maleic acid (SMA) polymers including a methylamine derivative facilitated gentle release of the infectious complexes for resolution of multimers, and a thiol-containing version promoted crystallization. Polymer extraction from brain homogenates from Syrian hamsters infected with Hyper prions and WT mice infected with Rocky Mountain Laboratories prions yielded infectious prion nanoparticles including oligomers and microfilaments bound to lipid vesicles. Lipid analysis revealed the brain phospholipids that associate with prion protofilaments, as well as those that are specifically enriched in prion assemblies captured by the methylamine-modified copolymer. A comparison of the infectivity of PrPSc attached to SMA lipid particles in mice and hamsters indicated that these amphipathic polymers offer a valuable tool for high-yield production of intact, detergent-free prions that retain in vivo activity. This native prion isolation method provides an avenue for producing relevant prion:lipid targets and potentially other proteins that form multimeric assemblies and fibrils on membranes.

Development of solvent-free protocols for obtaining highly substituted maleates of hyaluronic acid and other glycosaminoglycans.

Solvent-free protocols using microwave-assisted heating (i) or conventional heating without additives (ii) or adding K2CO3 (iii), or triturating at room temperature in the presence of K2CO3 (iv) were first used to esterify glycosaminoglycans (GAG) with maleic anhydride. High and low molecular weight hyaluronic acid (HMW and LMW HA), dermatan sulfate (Ds), heparin (HEP) and C6-oxidized HA (carboxy-HA) were used as substrates for maleation. Protocols (i)-(iii) were most effective for obtaining maleates with high DS (1.39-2.47), but had a strong degrading effect on GAG. Protocol (iv) did not have destructive effect, but was suitable for obtaining only HMW HA maleate (DS 0.71-1.15). Primary hydroxyl groups of HA and Ds showed a higher reactivity compared to the secondary ones. A specific feature of the HEP maleation was substitution of N-sulfate groups for N-maleate groups. To demonstrate the potential of the obtained maleates for thiol-ene click-chemical strategies, the reaction with l-cysteine was performed.

Metal-Chelated Polymer Nanodiscs for NMR Studies.

Paramagnetic relaxation enhancement (PRE) is commonly used to speed up spin lattice relaxation time (T1 ) for rapid data acquisition in NMR structural studies. Consequently, there is significant interest in novel paramagnetic labels for enhanced NMR studies on biomolecules. Herein, we report the synthesis and characterization of a modified poly(styrene-co-maleic acid) polymer which forms nanodiscs while showing the ability to chelate metal ions. Cu2+ -chelated nanodiscs are demonstrated to reduce the T1 of protons for both polymer and lipid-nanodisc components. The chelated nanodiscs also decrease the proton T1 values for a water-soluble DNA G-quadruplex. These results suggest that polymer nanodiscs functionalized with paramagnetic tags can be used to speed-up data acquisition from lipid bilayer samples and also to provide structural information from water-soluble biomolecules.

Lithium Binaphtholate-Catalyzed Michael Reaction of Malonates with Maleates and Its Application to the Enantioselective Synthesis of Tricarboxylic Acid Derivatives.

The Michael reaction of malonates with maleates afforded the corresponding adducts in high yields with high enantioselectivities (up to 98% enantiomeric excess (ee)) by using dilithium 3,3'-dichlorobinaphtholate as a catalyst. The obtained Michael adducts could be converted to optically active tricarboxylic acid (TCA) derivatives via the Krapcho reaction.

Structural characterization of styrene-maleic acid copolymer-lipid nanoparticles (SMALPs) using EPR spectroscopy.

Spectroscopic studies of membrane proteins (MPs) are challenging due to difficulties in preparing homogenous and functional lipid membrane mimetic systems into which membrane proteins can properly fold and function. It has recently been shown that styrene-maleic acid (SMA) copolymers act as a macromolecular surfactant and therefore facilitate the formation of disk-shaped lipid bilayer nanoparticles (styrene-maleic acid copolymer-lipid nanoparticles (SMALPs)) that retain structural characteristics of native lipid membranes. We have previously reported controlled synthesis of SMA block copolymers using reversible addition-fragmentation chain transfer (RAFT) polymerization, and that alteration of the weight ratio of styrene to maleic acid affects nanoparticle size. RAFT-synthesis offers superior control over SMA polymer architecture compared to conventional radical polymerization techniques used for commercially available SMA. However, the interactions between the lipid bilayer and the solubilized RAFT-synthesized SMA polymer are currently not fully understood. In this study, EPR spectroscopy was used to detect the perturbation on the acyl chain upon introduction of the RAFT-synthesized SMA polymer by attaching PC-based nitroxide spin labels to the 5th, 12th, and 16th positions along the acyl chain of the lipid bilayer. EPR spectra showed high rigidity at the 12th position compared to the other two regions, displaying similar qualities to commercially available polymers synthesized via conventional methods. In addition, central EPR linewidths and correlation time data were obtained that are consistent with previous findings.

Nitric oxide-releasing nanoparticles improve doxorubicin anticancer activity.

PURPOSE: Anticancer drug delivery systems are often limited by hurdles, such as off-target distribution, slow cellular internalization, limited lysosomal escape, and drug resistance. To overcome these limitations, we have developed a stable nitric oxide (NO)-releasing nanoparticle (polystyrene-maleic acid [SMA]-tert-dodecane S-nitrosothiol [tDodSNO]) with the aim of enhancing the anticancer properties of doxorubicin (Dox) and a Dox-loaded nanoparticle (SMA-Dox) carrier. MATERIALS AND METHODS: Effects of SMA-tDodSNO and/or in combination with Dox or SMA-Dox on cell viability, apoptosis, mitochondrial membrane potential, lysosomal membrane permeability, tumor tissue, and tumor growth were studied using in vitro and in vivo model of triple-negative breast cancer (TNBC). In addition, the concentrations of SMA-Dox and Dox in combination with SMA-tDodSNO were measured in cells and tumor tissues. RESULTS: Combination of SMA-tDodSNO and Dox synergistically decreased cell viability and induced apoptosis in 4T1 (TNBC cells). Incubation of 4T1 cells with SMA-tDodSNO (40 µM) significantly enhanced the cellular uptake of SMA-Dox and increased Dox concentration in the cells resulting in a twofold increase (P<0.001). Lysosomal membrane integrity, evaluated by acridine orange (AO) staining, was impaired by 40 µM SMA-tDodSNO (P<0.05 vs control) and when combined with SMA-Dox, this effect was significantly potentiated (P<0.001 vs SMA-Dox). Subcutaneous administration of SMA-tDodSNO (1 mg/kg) to xenografted mice bearing 4T1 cells showed that SMA-tDodSNO alone caused a twofold decrease in the tumor size compared to the control group. SMA-tDodSNO in combination with SMA-Dox resulted in a statistically significant 4.7-fold reduction in the tumor volume (P<0.001 vs control), without causing significant toxicity as monitored through body weight loss. CONCLUSION: Taken together, these results suggest that SMA-tDodSNO can be used as a successful strategy to increase the efficacy of Dox and SMA-Dox in a model of TNBC.

Facile synthesis of semi-library of low charge density cationic polyesters from poly(alkylene maleate)s for efficient local gene delivery.

Cationic polymers are one of the main non-viral vectors for gene therapy, but their applications are hindered by the toxicity and inefficient transfection, particularly in the presence of serum or other biological fluids. While rational design based on the current understanding of gene delivery process has produced various cationic polymers with improved overall transfection, high-throughput parallel synthesis of libraries of cationic polymers seems a more effective strategy to screen out efficacious polymers. Herein, we demonstrate a novel platform for parallel synthesis of low cationic charge-density polyesters for efficient gene delivery. Unsaturated polyester poly(alkylene maleate) (PAM) readily underwent Michael-addition reactions with various mercaptamines to produce polyester backbones with pendant amine groups, poly(alkylene maleate mercaptamine)s (PAMAs). Variations of the alkylenes in the backbone and the mercaptamines on the side chain produced PAMAs with tunable hydrophobicity and DNA-condensation ability, the key parameters dominating transfection efficiency of the resulting polymer/DNA complexes (polyplexes). A semi-library of such PAMAs was exampled from 7 alkylenes and 18 mercaptamines, from which a lead PAMA, G-1, synthesized from poly(1,4-phenylene bis(methylene) maleate) and N,N-dimethylcysteamine, showed remarkable transfection efficiency even in the presence of serum, owing to its efficient lysosome-circumventing cellular uptake. Furthermore, G-1 polyplexes efficiently delivered the suicide gene pTRAIL to intraperitoneal tumors and elicited effective anticancer activity.

Reversing the undesirable pH-profile of doxorubicin via activation of a di-substituted maleamic acid prodrug at tumor acidity.

The acid-labile behavior of di-substituted maleamic acid (DMA) and its equilibrium with di-substituted maleimide (DMI) are exploited to build an ultra acid-sensitive, small molecule prodrug that can be activated by tumor extracellular pH (pHe) in the range of 6.5-6.9. Such a DMA prodrug reversed the unfavorable pH-profile of doxorubicin (Dox), which may improve its therapeutic window.

Synthesis and pH-dependent hydrolysis profiles of mono- and dialkyl substituted maleamic acids.

Maleamic acid derivatives as weakly acid-sensitive linkers or caging groups have been used widely in smart delivery systems. Here we report on the controlled synthetic methods to mono- and dialkyl substituted maleamic acids and their pH-dependent hydrolysis behaviors. Firstly, we studied the reaction between n-butylamine and citraconic anhydride, and found that the ratio of the two n-butyl citraconamic acid isomers (α and ß) could be finely tuned by controlling the reaction temperature and time. Secondly, we investigated the effects of solvent, basic catalyst, and temperature on the reaction of n-butylamine with 2,3-dimethylmaleic anhydride, and optimized the reaction conditions to efficiently synthesize the dimethylmaleamic acids. Finally, we compared the pH-dependent hydrolysis profiles of four OEG-NH2 derived water-soluble maleamic acid derivatives. The results reveal that the number, structure, and position of the substituents on the cis-double bond exhibit a significant effect on the pH-related hydrolysis kinetics and selectivity of the maleamic acid derivatives. Interestingly, for the mono-substituted citraconamic acids (α-/ß-isomer), we found that their hydrolyses are accompanied by the isomerization between the two isomers.

Poly (methyl vinyl ether-co-maleic acid) - Pectin based hydrogel-forming systems: Gel, film, and microneedles.

Cross-linking of natural and synthetic polymers is widely explored to achieve the desired material properties (mechanical strength, drug loading capacity, swelling and erosion rates). However, the potential of polymers produced by crosslinking poly (methyl vinyl ether-co-maleic acid) (PMVE/MA) and pectin (PE) in pharmaceutics is mainly unexplored so far. We have investigated the effect of various esterification conditions and pectin content on the physicochemical properties. Materials have been characterized by fourier transform infrared, differential scanning calorimetry and scanning electron microscopy. In addition, swelling and bioadhesive features of PMVE/MA-PE hydrogel systems were investigated. A band shift for the carbonyl group from 1706 to 1776cm-1, and glass transition (Tg) increased from 55.4±0.9°C to 119.5±0.3°C confirmed the formation of esterification reaction within the cross-linked films. Cross-linked PMVE/MA:PE films with a ratio of 5 demonstrated a superior mass increase when compared to 2.5, 3.125, 3.75, 6.25, and 7.5 ratios of the same hydrogel film. Formulations containing PMVE/MA and pectin with a ratio of 3.75 showed superior bioadhesive features. For the first time, we engineered three-dimensional printing based swell-able microneedle arrays made out of cross-linked PMVE/MA-PE. Microneedle arrays height and aspect ratio were ranged from 702.5±11.9µm to 726±23.3µm and 3.12±0.20 to 3.29±0.21, respectively. Cross-linked PMVE/MA-PE Microneedle arrays (10-2, 24h) indicated the least height loss, 22.33±4.15%, during axial compression test; whilst, transverse failure of cross-linked PMVE/MA-PE Microneedle arrays was varied from 0.15±0.05 to 0.25±0.04N/needle. In conclusion, we obtained a novel cross-linked polymer system with promising features of drug delivery and bio-analytical applications.

Conductive polymer-based nanoparticles for laser-mediated photothermal ablation of cancer: synthesis, characterization, and in vitro evaluation.

Laser-mediated photothermal ablation of cancer cells aided by photothermal agents is a promising strategy for localized, externally controlled cancer treatment. We report the synthesis, characterization, and in vitro evaluation of conductive polymeric nanoparticles (CPNPs) of poly(diethyl-4,4'-{[2,5-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-1,4-phenylene] bis(oxy)}dibutanoate) (P1) and poly(3,4-ethylenedioxythiophene) (PEDOT) stabilized with 4-dodecylbenzenesulfonic acid and poly(4-styrenesulfonic acid-co-maleic acid) as photothermal ablation agents. The nanoparticles were prepared by oxidative-emulsion polymerization, yielding stable aqueous suspensions of spherical particles of <100 nm diameter as determined by dynamic light scattering and electron microscopy. Both types of nanoparticles show strong absorption of light in the near infrared region, with absorption peaks at 780 nm for P1 and 750 nm for PEDOT, as well as high photothermal conversion efficiencies (~50%), that is higher than commercially available gold-based photothermal ablation agents. The nanoparticles show significant photostability as determined by their ability to achieve consistent temperatures and to maintain their morphology upon repeated cycles of laser irradiation. In vitro studies in MDA-MB-231 breast cancer cells demonstrate the cytocompatibility of the CPNPs and their ability to mediate complete cancer cell ablation upon irradiation with an 808-nm laser, thereby establishing the potential of these systems as agents for laser-induced photothermal therapy.

Synthesis of Caffeine/Maleic Acid Co-crystal by Ultrasound-assisted Slurry Co-crystallization.

A green approach has been used for co-crystallization of noncongruent co-crystal pair of caffeine/maleic acid using water. Ultrasound is known to affect crystallization; hence, the effect of high power ultrasound on the ternary phase diagram has been investigated in detail using a slurry co-crystallization approach. A systematic investigation was performed to understand how the accelerated conditions during ultrasound-assisted co-crystallization will affect different regions of the ternary phase diagram. Application of ultrasound showed considerable effect on the ternary phase diagram, principally on caffeine/maleic acid 2:1 (disappeared) and 1:1 co-crystal (narrowed) regions. Also, the stability regions for pure caffeine and maleic acid in water were narrowed in the presence of ultrasound, expanding the solution region. The observed effect of ultrasound on the phase diagram was correlated with solubility of caffeine and maleic acid and stability of co-crystal forms in water.

Synthesis and therapeutic effect of styrene-maleic acid copolymer-conjugated pirarubicin.

Previously, we prepared a pirarubicin (THP)-encapsulated micellar drug using styrene-maleic acid copolymer (SMA) as the drug carrier, in which active THP was non-covalently encapsulated. We have now developed covalently conjugated SMA-THP (SMA-THP conjugate) for further investigation toward clinical development, because covalently linked polymer-drug conjugates are known to be more stable in circulation than drug-encapsulated micelles. The SMA-THP conjugate also formed micelles and showed albumin binding capacity in aqueous solution, which suggested that this conjugate behaved as a macromolecule during blood circulation. Consequently, SMA-THP conjugate showed significantly prolonged circulation time compared to free THP and high tumor-targeting efficiency by the enhanced permeability and retention (EPR) effect. As a result, remarkable antitumor effect was achieved against two types of tumors in mice without apparent adverse effects. Significantly, metastatic lung tumor also showed the EPR effect, and this conjugate reduced metastatic tumor in the lung almost completely at 30 mg/kg once i.v. (less than one-fifth of the maximum tolerable dose). Although SMA-THP conjugate per se has little cytotoxicity in vitro (1/100 of free drug THP), tumor-targeted accumulation by the EPR effect ensures sufficient drug concentrations in tumor to produce an antitumor effect, whereas toxicity to normal tissues is much less. These findings suggest the potential of SMA-THP conjugate as a highly favorable candidate for anticancer nanomedicine with good stability and tumor-targeting properties in vivo.

Solid-state supramolecular synthesis based on the N-H O heterosynthon: an approach to solve the polymorphism problem in famotidine.

Famotidine (FMT), a histamine H2 -receptor antagonist, is a drug commonly used in treatments of gastroesophageal diseases that presents solid-state polymorphism (A and B forms), the marketed form being the metastable polymorph B. A new stable salt was obtained by combination of FMT and maleic acid as coformer. FMT maleate (FMT-MLT) was prepared either by solvent evaporation or comilling methods. Single-crystal X-ray diffraction reveals that (FMT)(+) in FMT-MLT adopts an extended conformation that is stabilized by classical and nonclassical H-bonds. The three-dimensional packing consists of tapes along the axis b that further develop a columnar array based on H-bonds involving (FMT)(+) side chain. Nonconventional π-stacking interactions between adjacent tapes were also identified. Fourier transform infrared, differential scanning calorimetry, thermogravimetric analysis, polarized light thermal microscopy, and scanning electron microscopy were employed to characterize the multicomponent complex. According to the solubility values in water and simulated gastric fluid, FMT-MLT exhibits such a performance that improves on the solubility of the commercially available polymorph. Finally, the higher stability of FMT-MLT regarding both FMT forms, as well as its easy preparation from either A or B forms or a mixture of them, also allows to consider this salt as a valuable alternative to avoid the polymorphism issue in marketed formulations containing FMT.

Surface modification of poly(ether sulfone) membrane with a synthesized negatively charged copolymer.

In this study, we provide a new method to modify poly(ether sulfone) (PES) membrane with good biocompatibility, for which diazotized PES (PES-N2(+)) membrane is covalently coated by a negatively charged copolymer of sodium sulfonated poly(styrene-alt-maleic anhydride) (NaSPS-MA). First, aminated PES (PES-NH2) is synthesized by nitro reduction reaction of nitro-PES (PES-NO2), and then blends with pristine PES to prepare PES/PES-NH2 membrane; then the membrane is treated with NaNO2 aqueous solution at acid condition; after surface diazo reaction, surface positively charged PES/PES-N2(+) membrane is prepared. Second, poly(styrene-alt-maleic anhydride) (PS-alt-MA) is synthesized, then sulfonated and treated by sodium hydroxide solution to obtain sodium sulfonated (PS-alt-MA) (NaSPS-MA). Finally, the negatively charged NaSPS-MA copolymer is coated onto the surface positively charged PES/PES-N2(+) membrane via electrostatic interaction; after UV-cross-linking, the linkage between the PES-N2(+) and NaSPS-MA changes to a covalent bond. The surface-modified PES membrane is characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy (XPS) analyses, and surface zeta potential analyses. The modified membrane exhibits good hemocompatibility and cytocompatibility, and the improved biocompatibility might have resulted from the existence of the hydrophilic groups (sodium carboxylate (-COONa) and sodium sulfonate (-SO3Na)). Moreover, the stability of the modified membrane is also investigated. The results indicated that the modified PES membrane using negatively charged copolymers had a lot of potential in blood purification fields and bioartificial liver supports for a long time.

Preparation of manganese(II), chromium(III) and ferric(III) oxides nanoparticles in situ metal citraconate complexes frameworks.

The new reactions of some divalent and trivalent transition metal ions (Mn(II), Cr(III), and Fe(III)) with citraconic acid has been studied. The obtained results indicate the formation of citraconic acid compounds with molar ratio of metal to citraconic acid of 2:2 or 2:3 with general formulas Mn2(C5H4O4)2 or M2(C5H4O4)3⋅nH2O where n=6 for Cr, and Fe(III). The thermal decomposition of the crystalline solid complexes was investigated. The IR spectra of citraconate suggested that the carboxylic groups are bidentatically bridging and chelating. In the course of decomposition the complexes are dehydrated and then decompose either directly to oxides in only one step or with intermediate formation of oxocarbonates. This proposal dealing the preparation of MnO2, Fe2O3 and Cr2O3 nanoparticles. The crystalline structure of oxide products were checked by X-ray powder diffraction (XRD), and the morphology of particles by scanning electron microscopy (SEM).

Facile synthesis of PSMA-g-3ABA/MWCNTs nanocomposite as a substrate for hemoglobin immobilization: application to catalysis of H(2)O(2).

The new nanocomposite films based on poly(styrene-alternative-maleic anhydride) grafted to 3-aminobenzoic acid (PSMA-g-3ABA) and multi-walled carbon nanotubes (MWCNTs) were applied to immobilize hemoglobin (Hb) for biosensor fabrication (PSMA-g-3ABA/MWCNTs). Electrochemical impedance spectroscopy was used to confirm the adsorption of Hb onto the surface of PSMA-g-3ABA/MWCNTs. The immobilized Hb maintains its bioactivities and displays an excellent electrochemical behavior. The biosensor was used to catalyze the reduction of hydrogen peroxide. The electrocatalytic response showed a linear dependence on the H2O2 concentration ranging widely from 1.0×10(-6)M to 5.0×10(-4)M with a detection limit of 3.2×10(-7)M. The apparent Michaelis-Menten constant of Hb on the modified electrode was estimated to be 0.22mM. The proposed method opens a way to develop biosensors by using nanostructured materials with low electrical conductivity.

Comparison of pH-sensitive degradability of maleic acid amide derivatives.

We synthesized five maleic acid amide derivatives (maleic, citraconic, cis-aconitic, 2-(2'-carboxyethyl) maleic, 1-methyl-2-(2'-carboxyethyl) maleic acid amide), and compared their degradability for the future development of pH-sensitive biomaterials with tailored kinetics of the release of drugs, the change of charge density, and the degradation of scaffolds. The degradation kinetics was highly dependent upon the substituents on the cis-double bond. Among the maleic acid amide derivatives, 2-(2'-carboxyethyl) maleic acid amide with one carboxyethyl and one hydrogen substituent showed appropriate degradability at weakly acidic pH, and the additional carboxyl group can be used as a pH-sensitive linker.

Lipase release through semi-interpenetrating polymer network hydrogels based on chitosan, acrylamide, and citraconic acid.

In this study, a series of semi-interpenetrating polymer network (IPN) hydrogels were prepared as a support material for lipase immobilization. Hydrogels were synthesized via free radical polymerization in different compositions of chitosan (Cs), acrylamide (AAm), and citraconic acid (CA). The swelling values of the hydrogels were found to be 240-400%. Depending on the swelling results, Cs-P(AAm-co-CA)-2 hydrogel was chosen for lipase immobilization. Three different types of immobilization technique were carried out. Lipase release behaviors were investigated, and immobilization yields of three immobilization methods were compared, and the maximum immobilization yield value was determined for entrapment method.

S-nitrosothiol tethered polymer hexagons: synthesis, characterisation and antibacterial effect.

In this work, we portray a new controlled nitric oxide (NO) delivery platform by grafting S-nitrosothiol derived from cysteine into the polymeric backbone of poly(vinyl methyl ether-co-maleic anhydride). Nitrosothiols (RSNO's) are linked to the polymeric backbone through solvent displacement method. By adjusting solvent polarity, materials of different shapes and sizes varying between µm and nm are prepared. More often our method of preparation resulted in hexagonally shaped polymeric materials. The structure and RSNO conjugation analysis was investigated using scanning electron microscopy (SEM), FT-IR, UV-Vis spectroscopy and thermogravimetric analysis (TGA). Bactericidal efficacy of nitric oxide releasing polymer hexagons, a novel antibacterial agent is demonstrated against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa. Confocal microscopic studies revealed the enhanced bactericidal effect of polymer hexagons via membrane destruction. Results suggest that this biocompatible NO releasing RSNO conjugated polymer hexagons could be potentially useful for antimicrobial applications.