Correlation of sex hormone levels with orthodontic tooth movement in the maxilla: a prospective cohort study.

BACKGROUND: Sex hormones secreted during the menstrual cycle and the application of orthodontic forces to teeth can affect the metabolism of periodontal ligaments. This study aimed to determine whether there are any differences in orthodontic tooth displacement during the menstrual cycle and when using hormonal contraceptives and whether the amount of female sex hormones influences the efficiency of tooth displacement. METHODS: A total of 120 women aged between 20 and 30 years with Angle Class II requiring transpalatal arch (TPA) to derotate teeth 16 and 26 were included in this study. The participants were divided into two groups: group A, which included women with regular menstruation, and control group B, which included women taking monophasic combined oral contraceptives. Group A was divided into subgroups according to the moment of TPA activation: menstruation (A1), ovulation phase (A2), and luteal phase (A3) (examination I). On intraoral scans, measurement points were marked on the proximal mesial cusps of teeth 16 and 26, and the intermolar distance (M1) was determined. The change in the position of the measurement points 6 weeks after activation (examination II) made it possible to determine the derotating extent of teeth 16 (O16) and 26 (O26) and the widening of the intermolar distance (M2-M1). In examinations I and II, tooth mobility in the alveoli was assessed using Periotest based on the periotest values (PTV) PTV1 and PTV2, respectively. RESULTS: A significant difference in all parameters was observed among groups A1, A2, and A3 (P < 0.001). Group A3 showed the highest values of parameters O16, O26, and M2-M1, and group A2 showed the lowest values, which did not differ from the control group (P = 0.64). PTV2 and PTV1 were the highest in group A3 and the lowest in groups A1 and B. Intergroup differences were statistically significant (P < 0.001). CONCLUSIONS: With the quantification of changes in tooth mobility in the alveoli during the menstrual cycle in women undergoing orthodontic treatment, it was possible to determine that female sex hormones affect the effectiveness of orthodontic treatment, and the optimal moment for TPA activation is the luteal phase of the menstrual cycle.

The effectiveness of the total-maxillary-arch-distalization approach in treating class II division 1 malocclusion: A systematic review.

OBJECTIVE: The objective of this review is to assess the effect of total maxillary arch distalization (TMAD) treatment on the dental, skeletal, soft tissues, and airways during non-extraction camouflage treatment of class II division 1 patients. METHODS: We performed a systematic review of the published data in four electronic databases up to April 2023. We considered studies for inclusion if they were examining the effects of TMAD during treatment of class II division 1 malocclusion in the permanent dentition. Study selection, data extraction, risk of bias assessment, and assessment of the strength of the evidence using the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) tool were performed in duplicate. RESULTS: Out of the 27 articles that met the initial eligibility criteria, 19 studies were finally selected. Fair to relatively good quality evidence was identified after the risk of bias assessment of the included studies. Out of the 19 selected studies, 5 studies used inter-radicular TADs, 10 studies used modified C- palatal plate (MCPP), 3 studies used infra zygomatic crest (IZC) TADs, 1 study compared buccal TADs versus MCPP, and 1 study compared between cervical headgear and MCPP. The maximum amount of maxillary arch distalization using buccal TADs, MCPP, IZC TADs, and headgear was 4.2mm, 5.4mm, 5mm, and 2.5mm respectively. Different results regarding the amount of dental, skeletal, and soft tissue changes were observed. CONCLUSIONS: The current low to very low certainty level of evidence suggests that TMAD is effective in camouflaging class II division 1 malocclusion. Future well-conducted and clearly reported randomized controlled trials that include a control group are needed to make robust recommendations regarding the effect of TMAD with different appliances on dental, skeletal, and soft tissue structures. CLINICAL RELEVANCE: TMAD should be given priority with caution in class II patients who refuse the extraction of premolars. TMAD may be considered an adjunctive approach to solve cases associated with high anchorage need or anchorage loss.

Presence of single nucleotide polymorphisms in transforming growth factor ß and insulin-like growth factor 1 in class II malocclusions due to retrognathic mandible.

AIM: The aim of this study was to evaluate specific single nucleotide polymorphisms (SNP) of transforming growth factor-beta (TGF-ß) (rs1800469) and insulin-like growth factor-1 (IGF-1) (rs17032362) genes in Class II individuals with a normal maxilla and retrognathic (short) mandible.

Quantitative evaluation of vertical control in orthodontic camouflage treatment for skeletal class II with hyperdivergent facial type.

BACKGROUND: In this study, we sought to quantify the influence of vertical control assisted by a temporary anchorage device (TAD) on orthodontic treatment efficacy for skeletal class II patients with a hyperdivergent facial type and probe into the critical factors of profile improvement. METHODS: A total of 36 adult patients with skeletal class II and a hyperdivergent facial type were included in this retrospective case-control study. To exclude the effect of sagittal anchorage reinforcement, the patients were divided into two groups: a maxillary maximum anchorage (MMA) group (N = 17), in which TADs were only used to help with anterior tooth retraction, and the MMA with vertical control (MMA + VC) group (N = 19), for which TADs were also used to intrude the maxillary molars and incisors. The treatment outcome was evaluated using dental, skeletal, and soft-tissue-related parameters via a cephalometric analysis and cast superimposition. RESULTS: A significant decrease in ANB (P < 0.05 for both groups), the retraction and uprighting of the maxillary and mandibular incisors, and the retraction of protruded upper and lower lips were observed in both groups. Moreover, a significant intrusion of the maxillary molars was observed via the cephalometric analysis (- 1.56 ± 1.52 mm, P < 0.05) and cast superimposition (- 2.25 ± 1.03 mm, P < 0.05) of the MMA + VC group but not the MMA group, which resulted in a remarkable decrease in the mandibular plane angle (- 1.82 ± 1.38°, P < 0.05). The Z angle (15.25 ± 5.30°, P < 0.05) and Chin thickness (- 0.97 ± 0.45°, P < 0.05) also improved dramatically in the MMA + VC group, indicating a better profile and a relaxed mentalis. Multivariate regression showed that the improvement in the soft tissue was closely related to the counterclockwise rotation of the mandible plane (P < 0.05). CONCLUSIONS: TAD-assisted vertical control can achieve intrusion of approximately 2 mm for the upper first molars and induce mandibular counterclockwise rotation of approximately 1.8°. Moreover, it is especially important for patients without sufficient retraction of the upper incisors or a satisfactory chin shape.

Patient-reported outcomes during accelerating the en-masse retraction of the upper anterior teeth using low-intensity electrical stimulation: a randomized controlled trial.

BACKGROUND: Low-intensity electrical stimulation (LIES) is considered a relatively recent technology that has received little attention in orthodontics as a method of acceleration. This study aimed to evaluate patient-reported outcome measures when LIES is used to accelerate the en-masse retraction of the upper anterior teeth. MATERIALS AND METHODS: The sample consisted of 40 patients (8 males, 32 females; mean age 21.1 ± 2.3 years), with Class II division I malocclusion who required extraction of the first premolars to retract upper anterior teeth. They were randomly assigned to the LIES group (n = 20) and the conventional en-masse retraction group (CER; n = 20). Patient responses regarding pain, discomfort, burning sensation, swelling, chewing difficulty, speech difficulty, and painkillers' consumption were recorded at these nine assessment times: 24 h (T1), 3 days (T2), and 7 days (T3) after force application, then in the second month after 24 h (T4), 3 days (T5), and 7 days (T6) of force re-activation, and finally after 24 h (T7), 3 days (T8), and 7 days (T9) of force re-activation in the third month. RESULTS: The mean values of pain perception were smaller in the LIES group than those in the CER group at all assessment times with no statistically significant differences between the two groups except during the second and third months (T5, T6, T8, and T9; P < 0.005). However, discomfort mean values were greater in the LIES group with significant differences compared to CER group during the first week of the follow-up only (T1, T2, and T3; P < 0.005). Burning sensation levels were very mild in the LIES group, with significant differences between the two groups at T1 and T2 only (P < 0.001). Speech difficulty was significantly greater in the LIES group compared to CER group at all studied times (P < 0.001). High levels of satisfaction and acceptance were reported in both groups, without any significant difference. CONCLUSION: Both the LIES-based acceleration of en-masse retraction of upper anterior teeth and the conventional retraction were accompanied by mild to moderate pain, discomfort, and chewing difficulty on the first day of retraction. These sensations gradually decreased and almost disappeared over a week after force application or re-activation. TRIAL REGISTRATION: ClinicalTrials.gov, ClinicalTrials.gov, NCT05920525. Registered 17 June 2023 - retrospectively registered, http://clinicaltrials.gov/study/NCT05920525?term=NCT05920525&rank=1 .

Relationship between bite force, occlusal contact area, and three-dimensional facial soft tissue in dentofacial deformities.

PURPOSE: This study aimed to investigate three-dimensional facial soft tissue dimensions, maximum bite force (MBF), and occlusal contact area in patients with DFD. In addition, we analyzed the relationship between MBF and the three-dimensional facial measurements. METHODS: Thirty-two patients with skeletal Class III DFD and 20 patients with Class II DFD underwent a soft tissue evaluation using surface laser scanning, as well as MBF and occlusal contact area assessments. The DFD groups were compared with each other and with 25 healthy subjects. RESULTS: Significant morphological differences were found in the transversal, vertical, and anteroposterior dimensions between Class II DFD and Class III DFD. Both DFD groups presented an increased linear distance of chin height, which was strongly related with decreased MBF magnitude. The DFD groups exhibited lower MBF and occlusal contact area, with no significant differences between Class II and Class III DFD. CONCLUSION: The presence of DFD affected 3D measurements of facial soft tissue, causing variations beyond normal limits, lower MBF, and occlusal contact area in both Class II and Class III DFD patients. The vertical dimension might have influenced the lower MBF magnitude in the studied skeletal deformities.

Effects of Removable Functional Appliances on the Dentoalveolar Unit in Growing Patients.

Background and Objectives: The objective of this retrospective controlled study is to compare class II growing patients who underwent treatment with two different functional appliances: the Fraenkel regulator (FR-2), utilized as the control group, and the elastodontic device "Cranium Occluded Postural Multifunctional Harmonizers" (AMCOP), utilized as the test group. Materials and Methods: The study sample consisted of 52 patients with class II division I malocclusion (30 males, 22 females, mean age 8.6 ± 1.4 years) who were treated with the two different types of appliances: Group 1 (n = 27, mean age 8 [7.00, 9.00] years, 12 females, 15 males) received treatment with AMCOP, while Group 2 (n = 25, mean age 9.2 years [8.20, 10.00], 10 females, 15 males) received treatment with FR-2. The mean treatment duration for Group 1 was 28.00 [21.50, 38.00] months, while for Group 2 it was 23.70 [17.80, 27.40] months. Cephalometric analyses were performed on lateral cephalograms taken before treatment (T1) and after treatment (T2). Results: Significant intragroup differences were observed over time in Group 1 for 1^/PP. Similarly, significant intragroup differences were observed over time in Group 2 for SNB, ANB, and IMPA. Conclusions: Both treatment modalities resulted in the correction of class II malocclusion with dentoalveolar compensation, although the treatment duration with AMCOP tended to be longer on average.

The effect of different hybrid rigid internal fixation techniques on the postoperative stability following a mandibular advancement using a bilateral sagittal split ramus osteotomy: A retrospective three-dimensional comparative study.

OBJECTIVE: To three-dimensionally evaluate post-operative mandibular stability following bilateral sagittal split ramus osteotomies between hybrid and non-hybrid rigid internal fixation techniques. MATERIALS AND METHOD: Seventy adults with skeletal class II deformity who underwent bilateral split sagittal osteotomy with mandibular advancement were included. Patients were divided into four groups based on their fixation techniques: hybrid technique (HT) groups I, II, and IV received a 4-hole 2 mm miniplate with either a bicortical screw (BS), additional 2 mm 4-hole miniplate, or two-hole miniplate, while non-HT group III received a 4-hole 2 mm miniplate with four mini-screws (MS). Measurements were taken pre-operatively (T0), immediately postoperatively (T1), and ≥1 year after surgery (T2) using 3D Slicer software. RESULTS: Age, sex, and follow-up period did not correlate significantly with postoperative relapse or stability. Significant differences were observed in the advancement on the right side between groups II, III, and IV and on the left side between groups I, III, and IV. However, the type of surgical intervention showed no significant effect on postoperative relapse and stability. All groups of fixations showed satisfactory stability with irrelevant relapse (< 2 mm or 2°). CONCLUSION: The study demonstrated satisfactory and comparable stability among different fixation groups on patients undergoing mandibular advancement following bilateral split sagittal osteotomy. The results highlighted the importance of considering the degree of advancement when planning orthognathic surgery and managing postoperative outcomes.

Is hand-wrist radiography still necessary in orthodontic treatment planning?

OBJECTIVES: The aim of our study is to compare the relationship between hand-wrist and cervical vertebra maturation stages with chronological age and to investigate the effect of malocclusion type on the relationship between these methods. MATERIALS AND METHODS: Hand-wrist and cephalometric radiographs of 1000 patients (526 females, 474 males) with a mean age of 13.41 ± 1.83 were analyzed. The methods of Bacetti et al. were used for the cervical vertebra maturation stage, and Björk, Grave and Brown's methods were used for the hand-wrist maturation stage. One-way ANOVA test was applied to compare skeletal classes between them. Tukey post hoc test was used to determine the differences. The relationship between the malocclusion type, cervical vertebra and hand-wrist maturation stages was evaluated with the Spearman correlation test. RESULTS: Spearman's correlation coefficient was 0.831, 0.831 and 0.760 in Class I, II and III females, respectively. In males, it was calculated as 0.844, 0.889 and 0.906, respectively. When sex and malocclusion were not differentiated, the correlation was found to be 0.887. All were statistically significant (P < 0.001). The highest correlation was observed in class III males, while the lowest was found in class III females. CONCLUSION: Cervical vertebrae can be used safely to assess pubertal spurt without hand-wrist radiography. Diagnosing growth and development stages from cephalometric images is important in reducing additional workload and preventing radiation risk.

Long-term skeletodental changes with early and late treatment using modified C-palatal plates in hyperdivergent Class II adolescents.

OBJECTIVES: To compare skeletodental changes between early and late treatment groups using modified C-palatal plates (MCPP) and long-term retention outcomes in hyperdivergent Class II adolescents. MATERIALS AND METHODS: Seventy-one hyperdivergent Class II patients were divided into four groups according to treatment modality and treatment timing: group 1, early treatment with MCPP (n = 16; 9.9 ± 0.9 years); group 2, late treatment with MCPP (n = 19; 12.3 ± 0.8 years); group 3, early treatment with headgear (HG; n = 18; 9.6 ± 0.8 years); and group 4, late treatment with HG (n = 18; 12.1 ± 1.2 years). Lateral cephalograms were taken and skeletal and dental variables were measured. For statistical analysis, paired t-tests, independent t-tests, and multiple regression were performed. RESULTS: The early MCPP group showed a more significant decrease in mandibular plane angle than the late MCPP group did, and vertical control was more efficient in the early group than in the late group. In the MCPP groups, both FMA and SN-GoGn were increased with late treatment but decreased with early treatment, and the difference was statistically significant (P < .01). The early-treatment MCPP group had a significant decrease in SN-GoGn of 0.6° compared with an increase of 1.7° in the early treatment HG group (P < .01). Posttreatment stability of both the early and late MCPP groups was maintained in long-term retention. CONCLUSIONS: Early MCPP showed more significant vertical control than late MCPP. However, there was no difference in long-term stability between early and late groups.

Effects of eruption guidance appliance in the early treatment of Class III malocclusion.

OBJECTIVES: To evaluate the dentoskeletal effects and effectiveness of the eruption guidance appliance in Class III patients in the mixed dentition. MATERIALS AND METHODS: The experimental group comprised 22 patients with Class III malocclusion and anterior cross-bite (12 males, 10 females, mean age 7.63 ± 0.96 years) treated with the eruption guidance appliance over a mean period of 1.72 ± 0.48 years. The control group comprised 22 untreated subjects (12 males, 10 females, mean age 7.21 ± 0.60 years) with Class III malocclusion. Lateral cephalometric radiographs were obtained at pretreatment (T1) and posttreatment (T2). Intergroup comparisons were performed with Mann-Whitney and t-tests (P < .05). RESULTS: In the experimental and control groups, the anteroposterior relationship between the maxilla and mandible (ANB angle) remained stable during the treatment period (T1 to T2). The mandibular plane angle decreased in the experimental group and increased in the control group. In the experimental group, the lower anterior face height increase and maxillary molar vertical development were significantly smaller compared to controls. Positive overjet was achieved in 54% of the experimental group. CONCLUSIONS: The eruption guidance appliance produced no change in the skeletal anteroposterior relationship. The anterior cross-bite/edge-to-edge relationship was corrected in only about half of the treated subjects.

Quality of occlusal outcome in adult class II patients after maxillary total arch distalization with interradicular mini-screws.

BACKGROUND: The aim of the investigation was to evaluate if a Class II malocclusion in adult patients can be successfully corrected by maxillary total arch distalization with interradicular mini-screws in combination with completely customized lingual appliances (CCLA). METHODS: Two patient groups were matched for age and gender to determine differences in the quality of final treatment outcome. The treatment results of 40 adult patients with a Class I malocclusion (Group 1) were compared with those of 40 adult patients with a moderate to severe Class II malocclusion (Group 2). All patients had completed treatment with a CCLA (WIN, DW Lingual Systems, Bad Essen, Germany) without overcorrection in the individual treatment plan defined by a target set-up. To compare the treatment results of the two groups, 7 measurements using the American Board of Orthodontics Model Grading System (ABO MGS) and linear measurements for anterior-posterior (AP) and vertical dimensions were assessed at the start of lingual treatment (T1), after debonding (T2B), and compared to the individual target set-up (T2A). RESULTS: A statistically significant AP correction (mean 4.5 mm, min/max 2.1/8.6, SD 1.09) was achieved in Group 2, representing 99% of the planned amount. The planned overbite correction was fully achieved in both the Class I and Class II groups. There was a statistically significant improvement in the ABO scores in both groups (Group 1: 39.4 to 17.7, Group 2: 55.8 to 17.1), with no significant difference between the two groups at T2B. 95% of the adult patients in Group 1 and 95% in Group 2 would meet the ABO standards after maxillary total arch distalization with a CCLA and interradicular mini-screws. CONCLUSIONS: CCLAs in combination with interradicular mini-screws for maxillary total arch distalization can successfully correct moderate to severe Class II malocclusions in adult patients. The quality of the final occlusal outcome is high and the amount of the sagittal correction can be predicted by the individual target set-up.

The TSAR-osteotomy, a total subapical and ramus osteotomy: A technical note.

There are several treatment options to treat a class II dentofacial deformity with a pronounced chin. A total subapical osteotomy is one of these options. This type of osteotomy was refined to total subapical and ramus (TSAR) osteotomy. In this technical note, a detailed and schematic presentation of the TSAR osteotomy is presented step by step. The surgical approach to the TSAR osteotomy is divided into three parts. The first part consists of the horizontal osteotomy at the level of the ramus, the second part approaches the corticotomy to release and protect the mental nerve and the third part consists of connecting the horizontal ramus osteotomy and the local corticotomy around the mental nerve. In this third part, it is important that the inferior alveolar nerve (IAN) is actively sought and protected.

Skeletal, dentoalveolar and soft tissue changes after stabilization splint treatment for patients with temporomandibular joint disorders.

BACKGROUND: Temporomandibular disorder (TMD) is a grouping of heterogeneous disorders with multifactorial origins. Stabilization splints (SS) have demonstrated an acceptable treatment effect in TMD. The possible changes at the skeletal, dental, and soft tissue levels need to be addressed to evaluate the benefit/risk ratio of this therapeutic procedure. Accordingly, this study aimed to three­dimensionally evaluate skeletal, dentoalveolar and soft tissue changes after SS treatment for patients with TMD. METHODS: This retrospective study included 74 adult patients with myofascial and/or intra-articular disorders (25 males and 49 females), with an average age of 22.88 ± 4.8 years, who underwent SS treatment. Pre- and post-treatment Cone beam computed tomography were analysed using Invivo 6.0.3 software. The primary outcome was the vertical skeletal and dentoalveolar changes, while the secondary outcomes were the anteroposterior skeletal, dentoalveolar and soft tissue changes. Paired t-test and Wilcoxon rank sum test were used for statistical analyses. RESULTS: For the primary outcome; skeletally, there was a significant increase in mandibular plane inclination (difference: 0.82°±1.37), decrease facial height ratio (difference: 0.45%±1.07) and at the dentoalveolar level, the inclination of the functional (FOP-SN, FOP-FH) and bisecting (BOP-SN, BOP-FH) occlusal planes exhibited a significant increase too (difference: 0.38 ± 1.43°, 0.49 ± 1.62°, 0.44 ± 1.29° and 0.41 ± 1.17°, respectively) and also a decrease in the overbite (difference: -0.54 ± 0.83). For the secondary outcomes; there was a significant decrease in mandibular position (SNB) (difference: 1.60 ± 1.36°) and increase in the overjet (difference: 0.93 ± 1.04, p < 0.001) and a significant lower lip retrusion (difference: 0.33 ± 1.01 mm p < 0.01), was observed too. CONCLUSIONS: SS therapy resulted in significant vertical skeletal and dentoalveolar changes that were manifested mainly by facial height ratio, mandibular and occlusal plane changes, and to a lesser extent, significant anteroposterior skeletal, dentoalveolar, and soft tissue changes in the form of mandibular position, increased overjet and a more retrusive lower lip. These changes should be considered during patients' selection prior to initiating SS therapy.

A 10-year-old boy with class II oligodontia treated with buccal fixed appliances and agenesis space closure of the four second premolars: Case report No. 230075 - Titularisation Collège Européen Orthodontie (CEO), European College of Orthodontics.

The patient presented in this case report is a 10-year-old boy with hyperdivergent skeletal Class II associated with familial genetic agenesis of the second premolars. The treatment plan chosen was to close the spaces of agenesis using a bimaxillary appliance fixed buccally. The advantages and disadvantages of this treatment option were discussed. The result was stable and made it possible to avoid an implant-prosthetic solution, which would undoubtedly have been more restrictive over time.

Functional therapy and adenotonsillectomy clinical trial for class II malocclusion (FACT-II): protocol for a randomised controlled trial.

INTRODUCTION: Class II malocclusion with mandibular retrognathia is a common complication of paediatric obstructive sleep apnoea (OSA), often accompanied by transverse maxillary deficiency. In early orthodontic treatment, a twin block (TB) is a regular functional appliance for correcting this malocclusion. For paediatric OSA, the most common risk factor is adenotonsillar hypertrophy (AHT). Untreated AHT may lead to the persistence and worsening of obstructive sleep-disordered breathing traits, including habitual mouth breathing. Additionally, the clockwise mandibular rotation associated with AHT-induced pharyngeal crowding can undermine the effectiveness and stability of TB treatment. Adenotonsillectomy (T&A) is currently the first-line treatment for paediatric OSA. This proposed trial will investigate the impact of T&A surgery timing on the efficacy and stability of TB functional treatment in children with class II mandibular retrognathia and ATH. METHODS AND ANALYSIS: This will be a single-centre, parallel-group, superiority randomised controlled trial with participants randomised to intervention (T&A followed by TB treatment) or control arms (TB treatment followed by T&A) in a 1:1 ratio. A total of 40 patients aged 8-14 years, diagnosed with class II mandibular retrognathia and co-existing ATH-induced OSA, and indicated for both T&A surgery and TB treatment, will be recruited at the School and Hospital of Stomatology, Wuhan University. The primary outcomes will be the changes in the apnoea-hypopnoea index and the point A-nasion-point B angle from baseline to postorthodontic treatment between the two groups. Secondary outcomes will include other dental, skeletal, upper airway and soft tissue changes, as well as subjective sleep-related and oral-related quality of life. Outcome changes within each group and between groups will be analysed. ETHICS AND DISSEMINATION: This study is approved by the Ethics Committee of the School and Hospital of Stomatology, Wuhan University (no. 2022-D07). The research findings will be faithfully disseminated through scientific conferences or published articles. TRIAL REGISTRATION NUMBER: ChiCTR2200061703 (https://www.chictr.org.cn).

Biomechanical analysis of total arch maxillary distalization using infrazygomatic crest miniscrews: a finite element analysis study.

AIM: To evaluate the maxillary incisors and canine's immediate movement tendency using three different power arms (PA) height levels during total arch maxillary distalization supported on infrazygomatic crest (IZC) miniscrews according to finite element analysis (FEA). METHODS: Three finite element models of the maxilla were developed based on CBCT imaging of a teenage male patient presenting a Class II Division 1 malocclusion in the early permanent dentition. Maxillary complex, periodontium, orthodontic accessories, IZC miniscrews and an orthodontic wire were digitally created. The PAs were placed between canines and lateral incisors and projected at 4, 7, and 10 mm height distances. After that, distalization forces were simulated between PA and IZC miniscrews. RESULTS: The anterior teeth deformation produced in the FEA models was assessed according to a Von Mises equivalent. The stress was measured, revealing tendencies of initial maxillary teeth movement. No differences were found between the right and left sides. However, there was a significant difference among models in the under-stress areas, especially the apical and cervical root areas of the maxillary anterior teeth. More significant extrusion and lingual tipping of incisors were observed with the 4 mm power arm compared to the 7 mm and 10 mm ones. The 10 mm power arm did not show any tendency for extrusion of maxillary central incisors but a tendency for buccal tipping and intrusion of lateral incisors. CONCLUSION: The maxillary incisors and canines have different immediate movement tendencies according to the height of the anterior point of the en-masse distalization force application. Based on the PA height increase, a change from lingual to buccal tipping and less extrusion tendency was observed for the incisors, while the lingual tipping and extrusion trend for canines increased.

Evaluation of mandibular motion in adolescents with skeletal class II division 1 malocclusion during mandibular advancement using clear functional aligners: a prospective study.

BACKGROUND: This study aimed to evaluate the characteristics of mandibular protrusive condylar trajectory in adolescents with skeletal Class II Division 1 malocclusion and the changes of condylar trajectory during mandibular advancement (MA) treatment using clear functional aligners. METHODS: This prospective study consisted of a cross-sectional study and a longitudinal study. In cross-sectional study, sixty-one adolescents were divided into two groups: Class I (n = 30) and Class II Division 1 (n = 31). The condylar trajectory was measured and compared using the Mann-Whitney U test. The longitudinal study was the MA treatment group using clear functional aligner and consisted of 16 participants from Class II Division 1group. The condylar trajectory was collected at three-time points: pre-treatment (T1), during MA treatment at approximately 3 months (T2, 105.6 days average), and at the end of MA treatment (T3, 237.6 days average). The changes at T1, T2, and T3, as well as the symmetry between the left and right condyles across all groups, were examined using the Wilcoxon paired test. RESULTS: A greater increase in the anteroposterior displacement and space displacement during protrusive movements was observed in the Class II Division 1 group compared with that in the Class I group, with a large difference being observed in the left and right condylar movements. The condylar anteroposterior displacement and space displacement decreased significantly at T2 and increased significantly at T3; however, no significant difference was observed between T1 and T3. A significant difference was observed between the condylar movement on the left and right sides at T1; however, no significant difference was observed at T2 and T3. CONCLUSIONS: Adolescents with Class II Division 1 malocclusion had higher protrusive capacity than those with Class I. Moreover, their left and right condylar motion was more asymmetric. The range of condyle motion decreased first and then increased during MA therapy, and the left and right condyle movement became more symmetrical, which may be the adaptive response of neuromuscular function to the changes in jaw position.

Occlusal characteristics in modern humans with tooth agenesis.

Non-syndromic permanent tooth agenesis affects a significant proportion of the population, especially if third molars are considered. Although tooth agenesis has been linked to a smaller craniofacial size, reduced facial convexity and a shorter skeletal face, the occlusal characteristics of individuals with tooth agenesis remain largely unexplored. Therefore, this study investigated potential associations between tooth agenesis and metric occlusal traits in 806 individuals (491 with 4.1 missing teeth per subject, including third molars, and 315 without any tooth agenesis). Dentoskeletal morphology was defined through anatomical landmarks on pre-treatment cephalometric radiographs. Multivariate regression models, adjusted for sex and age, showed that tooth agenesis was significantly associated with a reduced overjet, an increased interincisal angle, and shorter upper and lower dental arch lengths, but not with overbite. Moreover, apart from reduced tooth length and dentoalveolar effects, as the number of missing teeth increased the upper front teeth were progressively retruded according to the craniofacial complex and to the face. Thus, tooth agenesis has a substantial influence on dental and occlusal characteristics, as well as on the sagittal position and inclination of anterior teeth. These findings emphasize the necessity for personalized, multidisciplinary approaches in individuals with multiple agenesis to successfully meet treatment goals.